sort out electric current as fundamental or derived unit.​

Answer:

The answer is "[tex]1.2566 \times 10^{-5}\,rad[/tex]".

Explanation:

As per the Rayleigh Criterion the minimum angular spreading, for a circular aperture:

[tex]\theta_{\mathrm{min}}\approx \sin\theta=1.22\,\frac{\lambda}{d}[/tex]  

[tex]\theta_{\mathrm{min}}=\mathrm{1.22\,\frac{\left( 610\,nm \right)}{\left( 5.90\,cm \right)}=1.22\,\frac{\left( 610\times10^{-9}\,m \right)}{\left( 5.90\times10^{-2}\,m \right)}}[/tex]

                               [tex]=1.22\times 103.389 \times 10^{-7}\\\\=1.22\times 1.03 \times 10^{-5}\\\\=\mathrm{1.2566 \times 10^{-5}\,rad}[/tex]

Answer:  An effect of continental drift is causing tectonic plates resting upon the convecting mantle to move which results in natural disasters like earthquakes, volcanic eruptions, and more.

Answer:

force and surface area are two factors affecting pressure on solids

more the force you apply, more will be the pressure

pressure and force are directly proportional meaning if Force is greater, pressure will also be greater

more the surface area of the solid less will be the pressure

surface area and pressure are inversely proportional meaning if surface are is big, pressure will be less, surface area small, pressure will be greater

Answer and Explanation:

We have a basic equation: Pressure = Force/Area.

So for example:

Increase pressure - increase the force or reduce the area the force acts on.

Decrease pressure - decrease the force, or increase the area the force acts on

The force per unit area is pressure. The force on the object is spread over the surface area. The area where the force is applied is divided by the equation for pressure.

Cheers,

Answer:

A dicot is a flowering plant that has one seed leaves. The monocot plants have a single cotyledon. Maize only has one cotyledon in their seed, so it's a monocot. Seeds having two Cotyles are mainly called a Dicot. A pea is a dicotyledonous plant, the seed (the pea itself) has two halves, cotyledons, hence dicot being 2.

Explanation:

One or more of the cotyledons are the first to appear from a germinating seed. Based on the number of cotyledons, botanists classify flowering plants (angiosperms) into :

a) plants with one embryonic leaf, termed monocotyledonous (monocots).

b) plants with two embryonic leaves, termed dicotyledonous (dicots).

Helpful Link:

https://www.vedantu.com/question-answer/in-pea-caster-and-maize-the-number-of-cotyledons-class-11-biology-cbse-5f626a17e5bde9062ff6d2a3

Answer:

The force is 3305.6 N.

Explanation:

Final velocity, v = 0

time, t = 2.25 ms

initial velocity, u = 4.25 m/s

mass, m = 1.75 kg

Let the acceleration is a.

Use first equation of motion.

v = u + a t

0 = 4.25 + a x 0.00225

a = - 1888.9 m/s^2

The force is

F = ma

F = 1.75 x 1888.9

F = 3305.6 N

Total distance = 10 km + 10 km = 20 km

1 km = 1000 m

20km x 1000 = 20,000 m

Total time = 20 min. + 30 min. = 50 minutes

Average speed = Distance /  time

Average speed = 20,000/50 min

Average speed = 400 m/s

Answer:

18 Nm

Explanation:

if the correct answer

Explanation:

The acceleration g varies by about 1/2 of 1 percent with position on Earth's surface, from about 9.78 metres per second per second at the Equator to approximately 9.83 metres per second per second at the poles.

Answer:

vf²=vi²+2a∆x

Explanation:

The third equation of motion gives the final velocity of an object under uniform acceleration given the distance traveled and an initial velocity: v 2 = v 0 2 + 2 a d . v^2=v_0^2+2ad. v2=v02+2ad. The graph of the motion of the object.

perpose of lab is to store apparatus and do some experiment

Helps someone to know the exert lengh of something

Answer:

θ = 66º

Explanation:

This exercise of Newton's second law must be solved in part, let's start by finding the slowing down acceleration of the ball

           a = v² / r

the radius of the circle is

          sin θ = r / L

          r = L sin θ

we substitute

          a = v² /L sin θ

now let's write Newton's second law

vertical axis

            T_y -W = 0

             T_y = W

radial axis

            Tₓ = m a                 (1)

let's use trigonometry for the components of the string tension

             cos θ = T_y / T

             sin θ = Tₓ / T

             Tₓ = T sin θ

we substitute in 1

            T sin θ = [tex]\frac{m \ v^2}{L \ sin \theta}[/tex]

             T L sin² θ = m v²

we write our system of equations

             T cos θ  = m g

             T L sin ² tea = m v²

we divide the two equations

             L [tex]\frac{sin^2 \theta}{cos \theta}[/tex] = v² / g

             (1 -cos²)/ cos θ  = [tex]\frac{v^2 }{g \ L}[/tex]

             1 - cos² θ  =  [tex]\frac{4.75^2}{9.81 \ 2.37}[/tex]   cos θ

             cos² θ + 0.97044 cos θ -1   = 0

we change variable    cos  θ = x

             x² + 0.97044 x - 1 =0

             x= [tex]\frac{-0.97 \pm \sqrt{0.97^2 - 4 1} }{2}[/tex]

           since the square root is imaginary there is no real solution to the problem, suppose that the radius is 1 m r = 1 m

           T sin θ = [tex]\frac{m \ v^2}{ r}[/tex]

           T cos θ  = m g

resolved

           tan θ =  [tex]\frac{v^2}{ r g}[/tex]

           θ = tan⁻¹ ( 4.75²/ 1 9.81)

           θ = 66º

Answer:

D. 25 / π Spiral / m

Explanation:

Given;

current, I = 5 A

magnetic field strength, B = 50 μT = 50 x 10⁻⁶ T

The magnetic field strength is given as;

[tex]B = \mu_0 nI\\\\where;\\\\\mu_0 \ is \ permeability \ of \ free \ space = 4\pi \times 10^{-7} T/A.m\\\\n \ is \ the \ number \ of \ spirals \ per \ length\\\\n = \frac{B}{\mu_0 I} = \frac{50 \times 10^{-6}}{5\times 4\pi \times 10^{-7}} = \frac{25}{\pi } \ spirals /m \\\\[/tex]

Therefore, the correct option is D. 25 / π Spiral / m

Answer:

as it hits the ground it's dispersed and this causes it to move in different directions

Answer:

Explanation:

Discount the time here; it's not important. It doesn't tell you how long it takes the car to stop, it only refers to reaction time, which means nothing in the scheme of things.

The useful info is as follows:

initial velocity = 20 m/s

final velocity = 0 m/s

a = -10 m/s/s

and we are looking for the displacement. Use the following equation:

[tex]v^2=v_0^2+2a[/tex]Δx

where v is the final velocity, v₀ is the initial velocity, a is the deceleration (since it's negative), and Δx is displacement. Filling in:

[tex]0^2=(20)^2+2(-10)[/tex]Δx and

0 = 400 - 20Δx and

-400 = -20Δx so

Δ = 20 meters

Answer:

2.5 m

Explanation:

Potential energy is the energy stored in an object as a result of its position relative to other objects

The change in potential energy is given by:

ΔPE = mgh;

where ΔPE is the change in potential energy, m is the mass if the object, g is the acceleration due to gravity and h is the change in height of the object.

Hence given that g = 10 m/s², ΔPE = 150 J, m = 6 kg, hence:

ΔPE = mgh

150 = 6 * 10 * h

150 = 60h

h = 2.5 m

Hence the change in height is 2.5 m

Explanation:

(b) A uniform beam 150cm long weighs 3.5kg and

supported on knife-edges at its ends. The beam

supports a weight 7kg at a distance 30cm from

one end. Find the reactions of the supports.

Answer:

[tex] \sf \: given \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \\ \bf \: mass \: \: \: m \: = 7.00 \times {10}^{ - 4} \: kg \\ \\ \bf \: E=mc^2 \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \\ \\ = > E=7.00 \times {10}^{ - 4} \times ({3 \times {10}^{8} })^{2} \\ \\ = > \green{ \boxed{ E = 6.3 \times {10}^{13} \: J}}[/tex]

Answer

I am not sure but it is may be 50J

I hope that's, this answer is fine.

Option ( iv ) is the correct answer.

A vector quantity the physical quantity that has both direction as well as magnitude.

Answer:

divide the density of solution by density of water

EXPLANATION:

LIKE:

1.25÷1000kgm-3

Answer:

H + H ------> He + energy. He + He -----> H + H + He.

Explanation:

Hydrogen having one proton and no neutron fuse with hydrogen having one proton and one neutron forming helium atom with the release of photon. After that two helium atoms combine together forming two hydrogen atoms having one proton each whereas one helium atom having two protons and two neutrons present in their nucleus so the end product of this reaction is hydrogen atoms and helium.

Explanation:

light travel slower in daimond

Answer:

The gravitational force between m₁ and m₂, is approximately 1.06789 × 10⁻⁶ N

Explanation:

The details of the given masses having gravitational attractive force between them are;

m₁ = 20 kg, r₁ = 10 cm = 0.1 m, m₂ = 50 kg, and r₂ = 15 cm = 0.15 m

The gravitational force between m₁ and m₂ is given by Newton's Law of gravitation as follows;

[tex]F =G \cdot \dfrac{m_{1} \cdot m_{2}}{r^{2}}[/tex]

Where;

F = The gravitational force between m₁ and m₂

G = The universal gravitational constant = 6.67430 × 10⁻¹¹ N·m²/kg²

r₂ = 0.1 m + 0.15 m = 0.25 m

Therefore, we have;

[tex]F = 6.67430 \times 10^{-11} \ N \cdot m^2/kg \times \dfrac{20 \ kg\times 50 \ kg}{(0.1 \ m+ 0.15 \ m)^{2}} \approx 1.06789 \times 10^{-6} \ N[/tex]

The gravitational force between m₁ and m₂, F ≈ 1.06789 × 10⁻⁶ N

Answer:

v = 50.5 m/s

Explanation:

F = (m)(^v/^t)

115N = (0.04551kg)(v/(0.020s))

2,526.917161 m/s² = v/(0.020s)

v = 50.53834322 m/s

v = 50.5 m/s

Answer:

Distance cover in 2  hour = 6 kilometer

Explanation:

Given equation:

x = 2t - 10

where

x = kilometer

t = hour

Find:

Distance cover in 2  hour

Computation:

T = 2

So,

x = 2t - 10

x = 2(2) - 10

x = 4 - 10

x = -6

Distance cover in 2  hour = 6 kilometer

Answer:

The distance is 6 km.

Explanation:

The equation of uniform linear motion of a particle has the form: x = 2t – 10. (x: km, t: h). What is the distance traveled by the particle after 2 hours?

x = 2t - 10

distance traveled after t = 2 hours

Substitute t = 2 in the given expression

x = 2 x 2 - 10

x = 4 - 10

x = - 6 km

So, the distance is 6 km.

Answer:

I_syst = 278.41477 kg.m²

Explanation:

Mass of platform; m1 = 117 kg

Radius; r = 1.61 m

Moment of inertia here is;

I1 = m1•r²/2

I1 = 117 × 1.61²/2

I1 = 151.63785 kg.m²

Mass of person; m2 = 62.5 kg

Distance of person from centre; r = 1.05 m

Moment of inertia here is;

I2 = m2•r²

I2 = 62.5 × 1.05²

I2 = 68.90625 kg.m²

Mass of dog; m3 = 28.3 kg

Distance of Dog from centre; r = 1.43 m

I3 = 28.3 × 1.43²

I3 = 57.87067 kg.m²

Thus,moment of inertia of the system;

I_syst = I1 + I2 + I3

I_syst = 151.63785 + 68.90625 + 57.87067

I_syst = 278.41477 kg.m²

Answer:

Explanation: The voltage or potential difference between two points is defined to be the change in ... I = qnAv relates the drift velocity to the current

Answer:

A) I_laser = 70.74 W/m²

B) I_bulb = 1.989 W/m²

C) it is not advisable to look at the laser beam directly.

Explanation:

We are given;

Power; P = 0.50 mW = 0.5 × 10^(-3) W

Diameter; d = 3 mm = 0.003 m

Radius; r = d/2 = 0.003/2 = 0.0015 m

A) Area of beam; A = πr²

A = 0.0015²π

Now, formula for average intensity is;

I = P/A

I = (0.5 × 10^(-3))/0.0015²π

I = 70.74 W/m²

B) We are told to find the intensity of a lightbulb producing 100-W.

Thus, P = 100 W

A light bulb is spherical in shape. Thus;

Area; A = 4πr²

We are told it's 2 m away.

Thus; r = 2 m

A = 4π(2)²

A = 16π

Thus, I = P/A = 100/16π

I = 1.989 W/m²

C) The intensity of the laser beam is far greater than that of the light bulb. Thus, it is not advisable to look at the laser beam directly.