Answer:
OD. The process of cutting down irrelevant information so only the information that is useful for particular purpose remains
Abstraction is the process of cutting down irrelevant information so only the information that is useful for a particular purpose remains.
What is abstraction?Abstraction is the practice of removing anything from a set of core features by eliminating or deleting attributes.
One of the three core ideas of object-oriented programming is abstraction order to decrease complexity and maximize efficiency, a programmer uses abstraction to conceal all but the important facts about an object.
Abstraction is the process of cutting down irrelevant information so only the information that is useful for a particular purpose remains.
Hence option D is correct.
To learn more about the abstraction refer to the link;
https://brainly.com/question/13072603
Someone help me with these questions please!
Answer:
a 25 and b 25
2. 26
60n
a bullet is dropped from the same height when another bullet is fired horizontally. they will hit the ground
Answer:
it will drop simultaneously
Which of the units of the following physical quantities are derived
Answer:
where is the attachment
Explanation:
A rubber ball and a steel ball are dropped from the same height onto a concrete floor. They have the same mass, and lets assume that they both rebound to the same height after hitting the ground. How would the average forces experienced by the balls compare. Group of answer choices The steel ball would experience the greater average force The average forces would be the same The rubber ball would experience the greater average force
Answer:
The average forces would be the same
Explanation:
Both have the same velocity on impact as they fell from the same height.
Both have the same velocity after the bounce because they reach the same height.
Both have the same mass
Both will thus experience the same impulse because both have the same change in momentum.
Therefore both experience the same average force.
A train moving west with an initial velocity of 20 m/s accelerates at 4 m/s2 for 10 seconds. During this tim
moves a distance of
meters.
Answer:
400m
Explanation:
[tex]x = v_{0}t + \frac{at^{2} }{2} \\x = 20*10+\frac{4*10x^{2} }{2} = 400m[/tex]We do not use water instead of mercury in a barometer
Answer:
Because
1)Water is relatively less dense. Mercury is 13.6 times more dense than water. SO, If you use water, you have to have the length of barometer of length (or height) 13.534 times the length of mercury barometer, which may be more than 11 meter in length.
2)Also mercury as compared to water, has comparatively less specific heat and good conductor of heat, could come to the same temperature of the atmosphere more quickly.
Answer:
The atmospheric pressure at sea level 76 cm of Hg=1.013× 10⁵ pascal .
Explanation:
That is if water is used in barometer tube instead of mercury the length of the tube must be greater than 10.326 cm.so we cannot replace mercury by water in the barometer.
Help again! Thank you all xoxo
Answer:
Amount of charge
Explanation:
Mark me brainliest
What is the final velocity if you have an initial velocity of 5 m/s with an acceleration of 3 m/s2 over a 4 second interval?
Answer: 17 m/s
Explanation:
Using the formula Vf=Vi+at
Vf=5m/s+3m/s^2(4s)
Vf= 17m/s
b) Calculate the equivalent capacitance of the network shown below between the points A nd 'B', Given: C1 = C2 = 12uF.C3 = 7uF, CA = C5 = C6 =151F C6 =15uF
As No diagram attached I am taking all are connected in series
We know
[tex]\boxed{\sf C_{eq}=C_1+C_2\dots}[/tex]
[tex]\\ \sf \longmapsto C_{eq}=12+12+7+15+15+15[/tex]
[tex]\\ \sf \longmapsto C_{eq}=24+7+45[/tex]
[tex]\\ \sf \longmapsto C_{eq}=76\mu F[/tex]
A magnifying glass produces a maximum angular magnification of 5.4 when used by a young person with a near point of 20 cm. What is the maximum angular magnification obtained by an older person with a near point of 65 cm
when 999mm is added to 100m ______ is the result
Answer:
what, 100.999m
Explanation:
convert 999 mm into meters, which is 0.999m and add that to a 100 m and that will make the total 100.999 m
The result of the addition of the two values is equal to 100.999 meters.
Given the following data:
Value 1 = 999 millimetersValue 2 = 100 metersTo determine the result of the addition of the two values:
First of all, we would convert the value in millimeter (mm) to meter (m) as follows:
Conversion:
1 millimeter = 0.001 meter
999 millimeter = X meter
Cross-multiplying, we have:
[tex]X = 0.001 \times 999[/tex]
X = 0.999 meter.
For the result:
[tex]Result = 0.999 +100[/tex]
Result = 100.999 meters.
Read more on measurements here: https://brainly.com/question/24842282
Two long straight wires are suspended vertically. The wires are connected in series, and a current from a battery is maintained in them. What happens to the wires? What happens if the battery is replaced by an a-c source?
Answer:
(i) When a battery is connected inseries to two long parallel wires, the currents in the two wires will be in opposite directions. Due to which a force of repulsion will be acting between them and they are moving further apart.
(ii) When a battery is connected in parallel to two long parallel wires, the currents in the two wires will be in same direction. Due to it, a force of attraction will be acting between them and they are coming closer to each other.
hope it's help you ....!!!!!
plz mark as brain list and follow me #rishu...!!!!
Explanation:
Hope it will helps you lot!
which sources of associated with the line emission spectrum?
1) electric fire
2) neon street sign
3) red traffic light
4) sun
Answer:
Answer if this question neon street sign
Explanation:
may this answer is helpful for you
Why does cold water kept in an open container become warm on a hot summer afternoon?
Cold water kept in an open container acquires heat from the warmer surrounding becomes warm like the air around it due to the transfer of thermal energy
Pls mark as brainliest
Two resistors connected in series have an equivalent resistance of 690 Ohms. When they are connected in parallel, their equivalent resistance is 118 Ohms. Find the resistance of each resistor.
Explanation:
Let [tex]R_1[/tex] and [tex]R_2[/tex] be the the resistances of the resistors. We are given that
[tex]R_1 + R_2 = 690\:Ω\:\:\:\:\:\:\:(1)[/tex]
and
[tex]\dfrac{1}{R_1} + \dfrac{1}{R_2} = \dfrac{1}{118\:Ω}\:\:\:\:\:(2)[/tex]
From Eqn(1), we can write
[tex]R_2 = 690\:Ω - R_1[/tex]
and then plug this into Eqn(2):
[tex]\dfrac{1}{R_1} + \dfrac{1}{690\:Ω - R_1} = \dfrac{1}{118\:Ω}[/tex]
or
[tex]\dfrac{690\:Ω}{(690\:Ω)R_1 - R_1^2}= \dfrac{1}{118\:Ω}[/tex]
[tex]\Rightarrow R_1^2 - (690\:Ω)R_1 + (690\:Ω)(118\:Ω)= 0[/tex]
or
[tex]R_1^2 - 690R_1 + 81420 = 0[/tex]
Using the quadratic formula, we find that the above equation has two roots:
[tex]R_1 = 151.1\:Ω,\:\:538.9\:Ω[/tex]
This means that if you choose one root value for [tex]R_1[/tex], the other root will be the value for [tex]R_2[/tex].
Open the sash half way up, take the beaker containing the dry ice / water out of the hood, and slowly move it from right in front of the hood all the way down to the floor. At what point do the fumes stop getting sucked up by the fume hood?
Answer:
The fumes stop getting sucked up by the fume hood once the beaker is pulled out of the hood.
For example, we can take Water
In (A) Water has same mass and great volume
In (B) Water has same mass and lower volume
Will there be any change in its density then?
Answer:
yes there will be change in its density
A car is running with the velocity of 72 km per hour what will be its velocity after 5 seconds if its acceleration is -2 metre per second square
Answer:
initial velocity (u)=72×1000/60×60
=72000/3600
=20m/s
final velocity(v)=v
Time(t)=5s
acceleration(a)=-2m/s
now,
acceleration(a)=v-u/t
-2=v-20/5
-2×5=v-20
-10=v-20
-10+20=v
v=10m/s
As a skydiver accelerates downward, what force increases? A. Gravity B. Thrust C. Air resistance D. Centripetal
Answer:
(A) Gravity is you're answer.
Explanation:
When an object or human is falling at an increased rate, The force of gravity is taking place.
A roller coaster has a total track length of 500 yards. A complete ride on the roller coaster is considered two times around the track. The start and stop places for the ride are virtually the same. What are the distance and displacement for a ride on the roller coaster? Explain your answers.
Answer:
Explanation:
its 1000 yards if its going around the track 2 times and that if one whole around the track is 500 its 500 x 2
A bicyclist moves along a straight line with an initial velocity vo and slows downs. Which of the following the best describes the signs set for the initial position, initial velocity and the acceleration ?
The sign set after the slowdown of the bicycle will be positive for the position, negative for velocity, and negative for acceleration.
What is velocity?The rate at which an object's position changes when observed from a specific point of view and when measured against a specific unit of time is known as its velocity.
According to Que, when a bicyclist moves in a straight line and slows down, then the velocity decrease as displacement is decreasing, and the acceleration also decreases only displacement increases.
Therefore, the sign set for the position is +ve, for velocity it is -ve, and for acceleration also -ve
To know more about Velocity:
https://brainly.com/question/19979064
#SPJ1
A biker slows down after traveling in a long, straight line at initial velocity v0. Which of the following the best \sdescribes the signs set for the initial position, initial velocity and the acceleration? Initial position Initial velocity Acceleration
A. Positive Negative Negative
B. Positive Positive Negative
C. Negative Positive Negative
D. Negative Negative Positive
E. Negative Negative Negative
Two forces are acting on a body. One acts east, the other at 35° north of east. If the
two forces are equal in magnitude of 50 N, find the resultant using the Law of Sines
and the Law of Cosines. Please answer with full solution. Thanks
A=B=50NAngle=theta=35°
We know
[tex]\boxed{\sf R=\sqrt{A^2+B^2+2ABcos\Theta}}[/tex]
[tex]\\ \sf\longmapsto R=\sqrt{50^2+50^2+2(50)(50)cos35}[/tex]
[tex]\\ \sf\longmapsto R=\sqrt{2500+2500+2(2500)\times (-0.9)}[/tex]
[tex]\\ \sf\longmapsto R=\sqrt{5000+5000(-0.9)}[/tex]
[tex]\\ \sf\longmapsto R=\sqrt{5000+(-4500)}[/tex]
[tex]\\ \sf\longmapsto R=\sqrt{5000-4500}[/tex]
[tex]\\ \sf\longmapsto R=\sqrt{-500}[/tex]
[tex]\\ \sf\longmapsto R=22.4i[/tex]
Resultant using the Law of Sines and the Law of Cosines will be R=95 N
What is force?Force is an external agent applied on any object to displace it from its position. Force is a vector quantity, so with magnitude it also requires direction. Direction is necessary to examine the effect of the force and to find the equilibrium of the force.
The Magnitude of two forces =50 N
Angle between the forces = 35
By using the resultant formula
[tex]\rm R=\sqrt{A^2+B^2+2ABCos\theta}[/tex]
[tex]\rm R=\sqrt{50^2+50^2+2(50)(50)Cos35}[/tex]
[tex]\rm R=\sqrt{5000+5000(0.81)}[/tex]
[tex]\rm R=\sqrt{5000+4500}[/tex]
[tex]\rm R=95\ N[/tex]
Hence the Resultant using the Law of Sines and the Law of Cosines will be R=95 N
To know more about force follow
https://brainly.com/question/25239010
If you jump off a 5 m diving platform how long will take you hit the water
Answer:
t = 1.0s
Explanation:
^d = v_0*t + (1/2)*a*t²
(5m-0m) = 0m/s*t + (.5)(9.81m/s²)*(t)²
5m = (4.905m/s²)*t²
t² = 1.01937s²
t = √1.01937s²
t = 1.0s
Which of the following exhibit the Tyndall Effect?
A flashlight beam through air in a room.
A laser beam through salt water.
Car headlights on a foggy night.
A laser beam through a soda drink.
Answer:
Probably all but (a)
The Tyndall Effect is caused by dispersion of the incident light by the individual molecules in the liquid.
Salt water and a foggy night will cause dispersion of the incident light.
A soda drink may also cause this dispersion, but and not sure.
how is the area of a circle measured
Answer:
Area of circle is measured using formula πr² which means π×radius×radius and π could be 22/7 or 3.14
Explanation:
If you like my answer than please mark me brainliest
Light of wavelength 600 nm illuminates a diffraction grating. The second-order maximum is at angle 39.2. How many lines per millimeter does this grating have?
Answer:
Diffraction equation applies in this case:
d*Sin x = m*wavelength, where d = spacing of lines, x = angle = 39.5°, m = order of maximum = 2
Substituting;
d* Sin 39.5 = 2*600*10^-9
d = (2*600*10^-9)/Sin 39.5 = 1.88656*10^-6 m
In 1 mm (or 0.001 m), the number of lines is given as;
Number of lines = 0.001/d = 0.001/(1.88656*10^-6) = 530.065 ≈ 530 lines
Which of the units of the following physical quantities are derived
Answer:
You have not provided options but so long as the option is none of these, it's the right answer:
Electric current, Thermodynamic temperature,mass,time amount of substance,length, luminous intensity
5. An electron is moving north in a region where
the magnetic field is south. The magnetic force
exerted on the electron is:
A.Zero
B. up
C. down
D. east
E. west
Answer:
eastlove india
a dentist used a light have wavelength 450nm what is the energy of the light
Answer:
≈ 4.41 x 10^-19
Explanation:
The formula for the energy of light is...
E = hc / λ
where 'h' is Planck's constant: 6.626 x 10^-34 Js
'c' is the speed of light: 2.998 x 10^8 ms
& 'λ' is the wavelength (in this case): 450 nm
1 nanometer (nm) = 1 x 10^-9m
E = (6.626 x 10^-34 Js)(2.998 x 10^8 ms) / (450nm)(1 m / 10^-9 nm)
E ≈ 4.41 x 10^-19 J
I think that's the answer and I hope it helps!
The source of sound moves away from the listener.The listener has the impression that the source is lower in pitch. Why?
When the source is moving away from the observer the velocity of the source is added to the speed of light. This increases the value of the denominator, decreasing the value of the observed frequency. Frequency corresponds to pitch or tone; a lower observed frequency will result in a lower observed pitch.
