rust is an oxide of _____​

Answer:

homozygous dominant

Explanation:

AA or BB would be another example of this. Having two of either capital or lowercase letters makes it homozygous. It is dominate because their is only one type of letter; In this case it is a capital letter.

Answer:

Homozygous

According to Mendelian inheritance, every trait (characteristic) of organsim is governed by pair of genes (that exist in two different forms, recessive and dominant allele).

Dominant allele (expressed in capital letter) masks the expression of recessive allele that is expressed in small letter.

There are two possible genotypes for dominant trait, such as 'tall pea plant' can be expressed by TT (homozygous dominant, since both alleles are same) and Tt (heterozygous dominant, since both are different alleles).

Thus, TT depicts homozygous dominant genotype.

(Hope this helps) Sky

Answer:

A. The atomic number

the anwer is B.The atomic mass because atoms may be similar atomic mass ,number of electron,proton,and neutron by the presence of isotope but no two atoms have the same atomic number

Answer:

We can assume that all force acting on the box are balanced in all directions .

Answer:

0.3634 °C

Explanation:

In this question, we are tasked with calculating the freezing point depression of 0.19 M C12H12O11( sucrose)

Mathematically this can be calculated using the formula;

ΔTf = i * kf * m

where ΔTf is the freezing point depression

i is Van’t Hoff factor

kf is the molal freezing point depression for the solvent

m is the molality of the solution

From the question we identify the following;

Since sucrose is a non-electrolyte, i = 1 ( i refers to the number of moles of particles obtained when 1 mol of solute dissolves)

m is 0.19

kf = 1.86

substituting these values into the equation, we have

ΔTf = 1 * 1.86 * 0.19 = 0.3534 °C

Answer:

H = 1+

O = 2-

O Has 8 protons weight 16g/mole

H has 1 proton weight 1g/mole

H - O - H

Oxygen is in group 6 which means it holds 6 valence electrons, leaving 2 for bonds.

A valence electron is an outer shell electron that can form a chemical bond if the outer shell is not closed.

Now when an atom bonds to another in a single bond, both atoms contribute one valence electron in order to form a shared pair.

In the picture O has 7 Valence electrons, so it would have a negative charge of 1.

The middle Hydrogen has 3 valence electrons which would make hydrogen have a charge of negative 1.

Should look like this

        ..                      ..

H .   .O.    .H   =   H-O-H

        ..                      ..

Answer:

The 5 properties are wavelength, amplitude, time-period, frequency and velocity/speed.

Explanation:

Answer:

the correct answer is sound wave can be described by five chacteristics:wavelength, amplitude,time-period, frequency and velocity or speed.

Explanation:

hope this helps !!!!

Explanation:

a)phenotype= 100% big

b) genotype=1:2:1 (FF-25%, Ff-50%, ff-25%)

phenotype=3:1 (big=75%, small= 25%)

Answer:

526.85K

Explanation:

Based on Charles's law, the volume of a gas is directly proportional to absolute temperature. The formrula is:

V₁ / T₁ = V₂ / T₂

Where 1 represents the initial state and 2 the final state of the gas

Using the values of the problem:

V₁ = 10.0L

T₁ = 127°C + 273.15K = 400.15K

V₂ = 20.0L

Thus, replacing in the formula:

10.0L / 400.15K = 20.0L / T₂

T₂ = 800K

In Celsius:

800K - 273.15 = 526.85K

Answer:

The Etna volcano when it previously erupted released a lot of smoke, and then volcanic lava.

Explanation:

The eruption of this volcano was on the Italian island of Sicily.

Where there were large columns of smoke and after that the volcanic magma in a viscoelastic state was released into the external environment.

Some sources claim that the eruption of this volcano reached the areas of Zaffanera.

The upthrust keeps a ship afloat. The upthrust keeps swimmers on top of the water. Things weigh less in water.

The upward force exerted on a body by the fluid in which the body is submerged is called the upthrust or buoyant force. The property of liquid to exert an upward force on a body immersed in it is called buoyancy. Being a force upthrust is measured in newton or kgf in the system of international units. Examples Pushing an empty can into water experiences the buoyant force. Pushing a cork into water into water experiences the buoyant force. Reason for Upthrust The thrust ating on on the sides of walls of the body get neutralised because they are equal in magnitude and opposite in the directions. There is a pressure difference between the lower and upper faces of block. Since force is the product of pressure and area, The difference in pressure due to liquid is on th two faces of causes a net upward force called upthrust on the body immersed in the fluid.

Answer: upthrust an upward force exerted by a fluid that opposes the weight of an immersed object.It is the force that pushes an object up. ... the upward force that a liquid or gas exerts on a body floating in it.

When a body is placed in water, Up thrust = V x d x g

From the above formula we can say that the following are the factors that affect up thrust:

Acceleration due to gravity - (g)

Density of the liquid - (d)

Volume of the body submerged in the liquid - (V), or volume of the liquid displaced (v)

Explanation:

Answer: A. The Wright brothers figured out how to outfit the plane with wings that flapped, similar to birds' wings,

Explanation: A p e x

Answer:

A

Explanation:

A p e x

Answer:

Hope this helps you

Answer:

14) The edge dislocation is more plastic than the screw dislocation

15) So as to form kinks that are fast moving

Explanation:

14) Edge and screw dislocations are the two main types of mobile dislocations

The three dimensional core of the screw dislocation prevents the slipping of the layers (one over the other) in a BCC metal such that kinks are required to be formed first  by thermal activation (heating) in order. The kinks are edge dislocation that move such that the screw dislocation moves forward

Hence, the edge dislocation is more plastic than the screw dislocation

15) The three dimensional structure of a screw dislocation acts like a wedge which resists the slipping of the layers in the BCC structure such that the screw dislocation needs to be highly thermally activated forming kinks before the surrounding layers can move.

Answer:

the answer to fill the blank is 5

Explanation:

i just did the lesson :)

Answer:

5

Explanation:

Answer:

Not saturated

Explanation:

not saturated; having the power to dissolve still more of a substance. Chemistry. (of an organic compound) having a double or triple bond and capable of taking on elements or groups by direct chemical combination without the liberation of other elements or compounds, as ethylene, CH2 = CH2; undersaturated.

Answer:

1M

Explanation:

The molarity of a substance is defined as the number of moles of the substance divided by how many liters the solution is. NaOH has a molar mass of about 40 grams, meaning that 10 grams of it would be 0.25 moles. 0.25/0.25= a molarity of 1.

Hope this helps!

Answer:

A television.

Explanation:

Diodes and Resistors are important components of modern day appliances. They are both made up of electrical components with two-terminals. The resistors provide resistance to the appliance while the diode enables electric current to flow in one direction. This enables proper functioning and prevention of hazards associated with electric current.

Answer:

Noble gases b/c its melts quicly that why enjoy

Answer: 44g

Explanation: The formular for finding Moles is ;

Moles =  Mass / Molar Mass or Formular Mass.

Base on this question; Moles = 10, Mass = 440g, and Formular Mass = ?

Making 'Formular Mass', subject of the formular; we thus have;

Formular mass = Mass / Moles = 440/ 10 = 44g

Answer:

Elastic Potential Energy

Answer:

1.24

Explanation:

According to the concept of significant figures, rounding off to  3 significant figures gives 1.24.

Significant figures are used for establishment  of a number which is presented in the form of digits. These digits give a meaningful representation  to the numbers.

The significant figures are the significant digits which convey the meaning according to the accuracy. These provide precision to the numbers and hence are called as significant numbers.There are rules for counting significant figures which are as follows:

1)All non-zero digits are significant .

2)All zeroes which occur between non-zero digits are significant.

3)All zeroes to the left and right of  a non-zero digit are not significant.

4) All zeroes on right  of decimal are significant if a non-zero number follows them.

5)All zeroes on right side of non-zero digit are significant.

Learn more about significant figures,here:

https://brainly.com/question/29153641

#SPJ7

Answer:

1. The soap molecule is made up of two different ends that include polar head which is hydrophilic carrying carboxylate group (-CO2) (binds with water) and the other is non-polar hydrocarbon tail that is hydrophobic carrying hydrocarbon chain (binds with stain) .

When soap water is added with stain or oil, soap molecules form micelles which are the tiny clusters of soap molecules representing hydrophilic head  (water-loving) points outwards that sticks to the water and hydrophobic tail (oil-loving) points inwards that stick to the oil and trap oil in the center.

As micelle is soluble in water, the trapped oil or stain is rinsed away along with soapy water.

2. A micelle is defined as a cluster of surfactant molecules that are dispersed water and form a colloidal solution.

3. Emulsification is the process in which soap act as an emulsifier that allows dispersion of immiscible liquid. It means soap will disperse stain or dirt in such a way that it can be removed.

4. As we discussed earlier, Soap has hydrophilic (water-loving) carboxylate group (-CO2) that form hydrogen bonds and ion-dipole interactions with water and the hydrophobic (water-fearing) tail carry nonpolar hydrocarbon chain that interacts with a stain by forming micelles through dispersion force.

The negatively charged carboxylate group (hydrophilic) repels each other and hydrocarbon chain (hydrophobic) trap stain inside and remove the dirt along with water.

Answer:

false

Explanation:

no, waste products in lab can't be poured down the sink because sometime cimicals can be harmfully and can damage the sink

Answer:

False

Explanation:

Your teacher has a designated area for getting rid of chemicals especially potentially hazardous chemicals

Answer:

6) 225.8 g

7) 1.01 g

8) 21.624 g

Explanation:

6) Molar Mass of Lithium Bromine: 86.845

86.845 * 2.6 = 225.8 g

7) Molar Mass of Neon: 20.180

20.180 * 0.05 = 1.01 g

8) Molar Mass of Water Vapor: 18.02

18.02 * 1.2 = 21.624 g

Answer:

Option B. 176g/mol

Explanation:

We'll begin by writing the chemical formula for hexasodium difluoride. This is given below:

Hexasodium means 6 sodium atom

Difluoride means 2 fluorine atom.

Therefore, the formula for hexasodium difluoride is Na6F2.

The relative formula mass of a compound is obtained by simply adding the atomic masses of the elements present in the compound.

Thus, the relative formula mass of hexasodium difluoride, Na6F2 can be obtained as follow:

Molar mass of Na = 23g/mol

Molar mass of F = 19g/mol

Relative formula mass Na6F2 = (23x6) + (19x2)

= 138 + 38

= 176g/mol

Therefore, the relative formula mass of hexasodium difluoride, Na6F2 is 176g/mol

Answer:

B. 176 g/mol

Explanation:

chemistry ed tell

Answer:

404.8g of (NH4)HSO4 is produced.

Explanation:

Step 1:

Data obtained from the question. This include the following:

Temperature (T) = 10°C = 10°C + 273 = 283K

Pressure (P) = 110KPa = 110/101.325 = 1.09atm

Volume (V) = 75L

Step 2:

Determination of the number of mole of ammonia, NH3.

The number of mole (n) of ammonia, NH3 can be obtained by using the ideal gas equation. This is illustrated below:

Note:

Gas constant (R) = 0.0821atm.L/Kmol

Number of mole (n) =?

PV = nRT

1.09 x 75 = n x 0.0821 x 283

Divide both side by 0.0821 x 283

n = (1.09 x 75) /(0.0821 x 283)

n = 3.52 moles

Step 3:

Determination of the number of mole ammonium hydrogen sulfate produced from the reaction.

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

NH3 + H2SO4 —> (NH4)HSO4

From the balanced equation above,

1 mole of NH3 produced 1 mole of (NH4)HSO4

Therefore, 3.52 moles of NH3 will also produce 3.52 moles of (NH4)HSO4.

Therefore, 3.52 moles of ammonium hydrogen sulfate, (NH4)HSO4 is produced.

Step 4:

Conversion of 3.52 moles of ammonium hydrogen sulfate, (NH4)HSO4 to grams. This is illustrated below:

Molar Mass of (NH4)HSO4 = 14 + (4x1) + 1 + 32 + (16x4) = 115g/mol

Number of mole of (NH4)HSO4 = 3.52 moles

Mass of (NH4)HSO4 =..?

Mass = mole x molar Mass

Mass of (NH4)HSO4 = 3.52 x 115 = 404.8g

Therefore, 404.8g of (NH4)HSO4 is produced.

The compound name for the chemical formula FeCO₃ is iron(II) carbonate.

Fe: The symbol "Fe" represents the chemical element iron.

CO₃: The symbol "CO₃" represents the carbonate ion, which consists of one carbon atom (C) bonded to three oxygen atoms (O).

The compound's name is iron(II) carbonate, which indicates the oxidation state of iron in the compound. In this case, the Roman numeral II (2) in parentheses after "iron" denotes that the iron atom has a +2 oxidation state. The name "carbonate" indicates the presence of the carbonate ion.

Therefore, FeCO₃ is composed of one iron (Fe) atom bonded to one carbonate (CO₃) group.

To learn more about the chemical formula, follow the link:

https://brainly.com/question/32018188

#SPJ6