Physics College

Raju completes one round of a circular track of diameter 200m in 30s. Calculate
a. The distance travelled by Raju
b. The magnitude of displacement travelled by Raju at the end of 30 s.

Answers

Answer 1

Explanation:

Given:

Diameter = 200 m

Radius, r = 200/2 = 100 m

Time taken, t = 30 seconds

Formula to be used:

Distance traveled, = circumference of circle = 2πr

Answer:

Putting all the values, we get

Distance traveled = 2πr

Distance traveled = 2 × 22/7 × 100 Distance traveled = 4400/7 Distance traveled = 628.57 m

So, the distance traveled by Raju is 628.57 m.

Now, magnitude of the displacement,

At the end of 30 seconds, Raju will come to starting position or initial position, so displacement is zero.

Related Questions

5. Hilda is trying to move a 40 kg couch across a level floor and pushes with a horizontal force of
150 N, but the couch does not move. What is the minimum coefficient of static friction with the
floor? Assume the acceleration due to gravity is g = 9.8 m/s2

Answers

The minimum coefficient of static friction with the floor is 0.3846.

To find the minimum coefficient of static friction with the floor, we need to consider the forces acting on the couch. In this case, the force of gravity is pulling the couch downward with a magnitude of mg, where m is the mass of the couch (40 kg) and g is the acceleration due to gravity (9.8 m/s²).

Since the couch does not move, the force of static friction between the couch and the floor must be equal in magnitude but opposite in direction to the horizontal pushing force of 150 N.

Therefore, we have the equation F_friction = F_push, where F_friction is the force of static friction.

The force of static friction can be calculated using the formula F_friction = μ_s * N, where μ_s is the coefficient of static friction and N is the normal force.

Since the couch is on a level floor and is not accelerating vertically, the normal force N is equal in magnitude but opposite in direction to the force of gravity, which is mg.

Substituting the values into the equation, we have μs * mg = 150 N.
Solving for μs, we get μs = 150 N / (mg).
Substituting the given values, we have μ_s = 150 N / (40 kg * 9.8 m/s²).
Simplifying, we find that μs = 0.3846.

For more such questions on friction visit:

https://brainly.com/question/24386803

#SPJ8

According to the principal of superposition,

Answers

Answer:

the resultant wave is the algebraic sum of all the waves reaching that particular point at a given time.

Explanation:

imagine two or three waves reaching a particular particle x at the same time. The particle will vibrate those waves and give out or transmit a resultant wave which is the algebraic sum of the incoming two waves. If both the waves have the same amplitude and phase, the resultant wave will be amplified. However if the waves have the same amplitude and equal but opposite phase then the resultant wave will be a straight line

Which law of thermodynamics does each of the following scenarios violate (if any)?

A machine that pulls all thermal energy out of a refrigerated space
1.
The first law of thermodynamics
2.
The second law of thermodynamics
3.
The third law of thermodynamics
4.
It is allowed


A machine that can pull 1000J of heat out of a refrigerated space and into a warmer space without external work
1.
The first law of thermodynamics
2.
The second law of thermodynamics
3.
The third law of thermodynamics
4.
It is allowed

A machine that can turn 1000J of heat directly into 1000J of electricity
1.
The first law of thermodynamics
2.
The second law of thermodynamics
3.
The third law of thermodynamics
4.
It is allowed

A machine that can create 1000J of heat from 100J of electricity
1.
The first law of thermodynamics
2.
The second law of thermodynamics
3.
The third law of thermodynamics
4.
It is allowed

A machine that can pull 1000J of heat out of a refrigerated space and put 1500J of heat into a warmer space if it uses 500J of external work

1.
The first law of thermodynamics
2.
The second law of thermodynamics
3.
The third law of thermodynamics
4.
It is allowed

Answers

Below are the required answers and explanations for each of the scenarios listed.

1. A machine that pulls all thermal energy out of a refrigerated space: This violates the second law of thermodynamics. This is because the second law of thermodynamics states that no heat engine can have an efficiency of 100 percent, and no heat transfer can occur from a colder to a warmer object without external work being done.

2. A machine that can pull 1000J of heat out of a refrigerated space and into a warmer space without external work: This violates the second law of thermodynamics. The second law of thermodynamics states that no heat transfer can occur from a colder to a warmer object without external work being done.

3. A machine that can turn 1000J of heat directly into 1000J of electricity: This does not violate any of the laws of thermodynamics.

4. A machine that can create 1000J of heat from 100J of electricity: This does not violate any of the laws of thermodynamics.

5. A machine that can pull 1000J of heat out of a refrigerated space and put 1500J of heat into a warmer space if it uses 500J of external work: This does not violate any of the laws of thermodynamics.

a) Option 2 is correct answer.

b) Option  2 is correct answer.

c) Option 4 is correct answer.

d) Option 4 is correct answer

e) Option 4 is correct answer.

For more question  thermodynamics

https://brainly.com/question/13059309

#SPJ8

Some dragonflies splash down onto the surface of a lake to clean themselves. After this dunking, the dragonflies gain altitude, and then spin rapidly at about 1100 rpm to spray the water off their bodies. When the dragonflies do this "spin-dry," they tuck themselves into a "ball" with a moment of inertia of 2.0×10−7kg⋅m2 . How much energy must the dragonfly generate to spin itself at this rate?

Answers

The dragonfly must generate approximately 4.8 × 10^-4 Joules of energy to spin itself at a rate of 1100 rpm.

Start by converting the rotational speed from rpm (revolutions per minute) to rad/s (radians per second). Since 1 revolution is equal to 2π radians, we can use the conversion factor:

Angular speed (ω) = (1100 rpm) × (2π rad/1 min) × (1 min/60 s)

ω ≈ 115.28 rad/s

The moment of inertia (I) is given as 2.0 × 10^-7 kg⋅m².

Use the formula for rotational kinetic energy:

Rotational Kinetic Energy (KE_rot) = (1/2) I ω²

Substituting the given values:

KE_rot = (1/2) × (2.0 × 10^-7 kg⋅m²) × (115.28 rad/s)²

Calculate the value inside the parentheses:

KE_rot ≈ (1/2) × (2.0 × 10^-7 kg⋅m²) × (13274.28 rad²/s²)

KE_rot ≈ 1.331 × 10^-3 J

Round the result to the proper number of significant figures, which in this case is three, as indicated by the given moment of inertia.

KE_rot ≈ 4.8 × 10^-4 J

Therefore, the dragonfly must generate approximately 4.8 × 10^-4 Joules of energy to spin itself at a rate of 1100 rpm.

For more such questions on energy, click on:

https://brainly.com/question/8101588

#SPJ8

1. A ball is at rest on the top of a hill (see the figure).
At the top of the hill, the ball will have [the maximum value of its, no, the minimum value of its] gravitational potential energy and [no, the maximum value of its] kinetic energy. If the ball rolls down the hill then, its [gravitational potential energy, kinetic energy] is converted to [gravitational potential energy, kinetic energy] when it gets to the ground.

2. Get your stopwatch ready and prepare to drop the object from the height h you selected in the previous step. You should drop the object so its [bottom, top, middle] part is initially at the height h. The initial speed of the ball [zero, 9.8 m/s, 9.8 m/s^2, depends on the height h] You'll need to measure the time from when the ball leaves your hand to exactly when it hits the ground [ for the first time it bounces, after it bounces and then comes to rest, both the first time and then after it bounces; then average the two times]
.

Answers

1. At the top of the hill, the ball will have the maximum value of its gravitational potential energy and the minimum value of its kinetic energy. As the ball rolls down the hill, its gravitational potential energy is converted to kinetic energy when it gets to the ground.

2. When dropping the object, you should drop it so its top part is initially at the height h. The initial speed of the ball will be zero since it starts from rest. To measure the time it takes for the ball to hit the ground, you should start the stopwatch when the ball leaves your hand and stop it when the ball hits the ground for the first time. It is recommended to perform multiple trials and calculate the average time to minimize errors.

How much impulse is imparted on a 0.14 kg baseball initially traveling at 32 m/s when it is struck by a baseball bat and begins to travel in the opposite direction at 49 m/s

Answers

ANSWER AND EXPLAINATION:
To calculate the impulse imparted on the baseball, we can use the impulse-momentum principle, which states that the impulse experienced by an object is equal to the change in momentum of the object. Mathematically, it can be expressed as:

Impulse = Change in momentum

The momentum of an object is given by the product of its mass and velocity:

Momentum = mass × velocity

In this case, the baseball has an initial mass of 0.14 kg and an initial velocity of 32 m/s. After being struck by the bat, it travels in the opposite direction at a velocity of 49 m/s.

Therefore, the change in momentum is given by:

Change in momentum = (mass × final velocity) - (mass × initial velocity)

Change in momentum = mass × (final velocity - initial velocity)

Change in momentum = 0.14 kg × (49 m/s - (-32 m/s))

Change in momentum = 0.14 kg × (49 m/s + 32 m/s)

Change in momentum = 0.14 kg × 81 m/s

Change in momentum = 11.34 kg·m/s

So, the impulse imparted on the baseball is 11.34 kg·m/s.

A bicyclist started from rest along a straight path. After 2.0 s, his speed was 2.0 m/s. After 5.0 s, his speed was 8.0 m/s. What was his acceleration during the time 2.0 s to 5.0 s?

Answers

Acceleration is the change in velocity over time. We can calculate the acceleration of the bicyclist during the time 2.0 s to 5.0 s using the formula acceleration = (final velocity - initial velocity) / time.

The initial velocity of the bicyclist at 2.0 s is 2.0 m/s and the final velocity at 5.0 s is 8.0 m/s. The time interval between 2.0 s and 5.0 s is 3.0 s.

Substituting these values into the formula, we get acceleration = (8.0 m/s - 2.0 m/s) / 3.0 s = 6.0 m/s / 3.0 s = 2.0 m/s^2.

So, the acceleration of the bicyclist during the time 2.0 s to 5.0 s was 2.0 m/s^2.

Which law of thermodynamics does each of the following scenarios violate (if any)?

A machine that can create 1000J of heat from 100J of electricity
1.
The first law of thermodynamics
2.
The second law of thermodynamics
3.
The third law of thermodynamics
4.
It is allowed

Answers

The scenario described violates option 2. the second law of thermodynamics.

The second law of thermodynamics states that in any energy transfer or transformation, the total entropy of an isolated system always increases or remains constant, but it never decreases. Entropy can be thought of as a measure of the disorder or randomness in a system.

In the given scenario, the machine is claimed to create 1000J of heat energy from only 100J of electrical energy. Heat energy is a form of random molecular motion, and the conversion of electrical energy to heat involves an increase in entropy. According to the second law, energy transfers or transformations must always lead to an overall increase in entropy.

However, in this scenario, the machine appears to violate the second law by creating a significant amount of heat energy from a relatively small amount of electrical energy. This would imply a decrease in entropy, which contradicts the fundamental principle of the second law.

In reality, no machine can achieve 100% efficiency, meaning it cannot convert all the input energy into the desired output energy without any energy losses. Some energy will always be lost as waste heat due to inefficiencies in the conversion process. This waste heat contributes to the increase in entropy.

know more about second law of thermodynamics here:

https://brainly.com/question/30600157

#SPJ8

a 2. A wire having a mass per unit length of 0.500 g/cm carries a 2.00-A current horizontally to the south. What are the direction and magnitude of the minimum magnetic field needed to lift this wire vertically upward?
​

Answers

The minimum magnetic field needed to lift the wire vertically upward is approximately 0.0245 Tesla, with the direction perpendicular to the plane formed by the wire and pointing upward.

How to solve for the minimum magnetic field

The mass per unit length (m) is given as 0.500 g/cm. We can convert this to kg/m by dividing by 1000:

m = 0.500 g/cm = 0.500 g / (100 cm) = 0.005 kg/m

We know that the force required to lift the wire vertically upward should counteract the force of gravity acting on the wire, which is given by:

F_gravity = mg

Where:

- m is the mass per unit length

- g is the acceleration due to gravity (approximately 9.8 m/s²)

Substituting the given values:

F_gravity = (0.005 kg/m)(9.8 m/s²) = 0.049 N/m

Since the magnetic force should equal the force of gravity to lift the wire vertically, we have:

F = BIL = 0.049 N/m

Substituting the values for I and L:

2.00 A * L * B = 0.049 N/m

To lift the wire vertically, we want to find the minimum magnetic field (B). As L is not given, we can assume a length of 1 meter for simplicity:

2.00 A * 1 m * B = 0.049 N/m

2.00 A * B = 0.049 N

Now we can solve for the minimum magnetic field (B):

B = 0.049 N / 2.00 A

B = 0.0245 T

Therefore, the minimum magnetic field needed to lift the wire vertically upward is approximately 0.0245 Tesla, with the direction perpendicular to the plane formed by the wire and pointing upward.

Read mroe on minimum magnetic field here https://brainly.com/question/12735854

#SPJ1

Other Questions
Identify the similarities and differences in these three concepts:- Procedural justice, workplace due process, and ethical decisions about behavior, and discuss how your organization (or one with which you are familiar) ensures fairness. Support your response with a specific example. record of travel along a straight path is as follows: 1. Start from rest with constant acceleration of 2.70 m/s 2 for 10.0 s. 2. Maintain a constant velocity for the next 2.70 min. 3. Apply a constant negative acceleration of 9.07[ m/s 2 for 2.98 s. (a) What was the total displacement for the trip? m (b) What were the average speeds for legs 1,2 , and 3 of the trip, as well as for the complete trip? leg1 leg2 m/s leg3 m/s complete trip m/s m/s Mr. Bilboa is a citizen of Portugal. Which of the following statements is true?A) The U.S. government has no jurisdiction to tax Mr.Bilboa because he is not a U.S. citizen.B) The U.S. government has jurisdiction to tax Mr.Bilboa if he is a permanent resident of the UnitedStates.C) The U.S. government has jurisdiction to tax Mr.Bilboa if he earns income from a business he operatesin Florida.D) Both B. and C. are true. Which of the following statements about partnerships is incorrect?a. Most large accounting firms are organized as a limited partnership.b. A corporation is a separate legal entity, but a partnership is not.c. Partnership accounting does not have to always follow GAAP rules.d. In a general partnership business, all partners have unlimited liability.e. In a limited partnership, not every partner has limited liability Suppose a wheel with a tire mounted on it is rotating at the constant rate of 2.97 times a second. A tack is stuck in the tire at a distance of 0.379 m from the rotation axis. Noting that for every rotation the tack travels one circumference, find the tack's tangential speed. tangential speed: What is the tack's centripetal acceleration? centripetal acceleration: Anle Corporation has a current stock price of $16.39 and is expected to pay a dividend of $0.85 in one year. Its expected stock price right after paying that dividend is $18.62. What is Anle's equity cost of capital? b. How much of Anle's equity cost of capital is expected to be satisfied by dividend yield and how much by capital gain? Write a reflective essay to critically evaluate the usefulnessof change management models in Apple Inc and recommend one specificmodel to support the strategic option adopted by Apple Inc. Suppose that e,d,m,cZ satisfy ed1mod(n) and cm emodn,mc dmodn. 6. Alice publishes her RSA public key: (n,e)=(2038667,103). (a) Bob wants to send her the message m=892383. What ciphertext c does he send? (b) Eve knows p=1301 divides n. What is Alice's private key (n,d) ? (c) Alice receives the ciphertext c=317730 from Bob. What message m did he send? You are an employee of University Consultants, Ltd. and have been given the following assignment. You are to present an investment analysis of a small income-producing office property for sale to a potential investor. The asking price for the property is $1,250,000; rents are estimated at $200,000 during the first year and are expected to grow at 3 percent per year thereafter. Vacancies and collection losses are expected to be 10 percent of the rents. Operating expenses will be 35% of effective gross income. A fully amortizing 70 percent loan can be obtained at an 11 percent interest for 30 years. The loan requires constant monthly payments and is a fixed rate mortgage. The mortgage has no prepayment penalties. Interest accrues on a monthly basis. The property is expected to appreciate in value at 3 percent per year and is expected to be owned for three years and then sold. You determine that the building represents 90% of the acquisition price. The building should be depreciated using the straight line method over 39 years. The potential investor indicates that she is in the 36 percent tax bracket and has enough passive income from other activities so that any passive losses from this activity would not be subject to any passive activity loss limitations. Capital gains from price appreciation will be taxed at 20 percent and depreciation recapture will be taxed at 25%. a) What is the investor's after tax internal rate of return (ATIRR) on equity invested? b) The investor has an alternative investment opportunity of similar risk that brings her an annualized after-tax return of 15%. Should she invest in this office building? Describe the rationale behind your recommendation. c) What is the NPV of this investment, assuming a 15% discount rate? d) What is the going-in capitalization rate? What is the terminal or going-out capitalization rate? Now assume the investment is financed with a 70% loan-to-value ratio interest-only mortgage. The interest rate on this mortgage will remain at 11%. e) Find the IRR under this alternative assumption? A local club plans to invest 15,000 pesos to host a football game. They expect to sell tickets worth 20,000 pesos. But if it rains on the day of the game, they won't sell any tickets and the club will lose all the money invested. The weather forecast for the day of game is 20% possibility of rain. Find the expected value. 1000 pesos (B) 4000 pesos (C) 8000 pesos (D) 19000 pesos Question 10 FOR QUESTIONS 10 and 11: A local club plans to invest 15,000 pesos to host a football game. They expect to sell tickets worth 20,000 pesos. But if it rains on the day of the game, they won't sell any tickets and the club will lose all the money invested. The weather forecast for the day of game is 20% possibility of rain. Which probability distribution represents the problem above? Question 8 2 Points FOR QUESTIONS 8 and 9: You play a game with a spinner where in you will spin once. If you land on blue, you win 5 pesos. If you land on red, you don't pay or win anything. If you land on yellow, you pay 5 pesos. Given that P( blue )= 7 1 ,P( red )= 7 1 and P( yellow )= 7 5 Which probability distribution represents the spinner game? Suppose you are thinking to collect data to conduct research on promotion of a fast food item (pizza/burger). Based on your requirements construct a questionnaire which confirms all the features of an effective questionnaire design. Gunther likes to show off and flaunt his success since ________ permeate(s) his culture.Multiple Choicea. feminine dimensionsb. weak uncertainty avoidancec. strong uncertainty avoidanced. long-term orientatione. masculine values solve (9th grade math 1) Which of the following statements is true about ALL isotopes of polonium? Select one: a. Same atomic mass; Same chemical properties b. Same atomic mass; Same nuclear properties c. Same atomic number; Same chemical properties d. Same atomic number; Same nuclear properties According to your textbook, it is difficult to measure socialmedia ROI. What are the five steps to help gauge the effectivenessof a social media effort? . Find the currens. c. Find the potential difference (voltage drop) 14. The load across a 12V battery with a series combination of three resistors, R 1 ,R 2 , and R 3 ,R 1 is ucross the 125 lamp. a. lout across a 12 V battery consists of a combivation of three resistors that are 15, and 24, respectively. 210,R 2 is 350, and R 3 is 1202 b. Find the current. c. Find the potential difference across R 3 a. Wlat is the total resistance? b. What is the current? 15. Three resistors, 12 cach, are connected in parallel. What is the total resistance? 13. The load across a 40 V battery consists of a series combination of three resistors, R 1 ,R 2 , and R 2 . R 1 is 2402 and R 3 is 120. The potential difference across R 1 is 24 V. Cont'd next colutnn 16. Twa lesistors, one 62 and one 88 arc comected in parallel. The resistors are then connected to a 12-V battery. a. What is the total resistance? b. What is the current through each resiston? 17. A 110 V househoid circuit has an 1800 W incrowave, a 1000 W toaster, and an 800 W coffeemaker connected to a20 A fuse. Determine the currelit. Will the fuse melt if the micruwave and the colfeemaker are both on? 18. A 35,55, and 85 resibtor are connected in parallel. The resistors are then wonnected to a 35 V battery: a. What is the trial resistance? b. What is the current tirough each resistor? Write a C program to calculate factorials (n!) for integer values that the user enters. More specifically, the program should do the following. 1. Use appropriate variable types for the calculations being performed. 2. Prompts the user to enter an integer less than 21 for which the program will calculate the factorial. 3. Calculate the factorial for the number entered if it is less than 21 . a. Use a loop to calculate the factorial of the value that was entered. 4. Print out the value the user entered and its factorial value. 5. Allow the user to keep entering additional integers obtain additional factorials. You have your choice of terminating the loop by: a. Having the user enter a 0 value, or b. Having them enter a ' q ' or other character that is not a number. Problem 20 A camera lens is made of a glass with index of refraction of 1.50. A 100 nm thick antireflection coating made of MgF2 (n=1.38) is deposited on the surface of the lens. Calculate the wavelength (in air) of the visible light for which this coating works best. a) 552 nm b) 600 nm c) 400 nm d) 276 nm e) 345 nm f) 476 nm Set up a system of linear equations to represent the scenario, Solve the system by using Gaussian elimination or Gauss-jordan elimination. Sylvia invested a total of $23,000. She invested part of the money in a certificate of deposit (CD) that earns 3% simple interest per year. She invested in a stock that returns the equivalent of 6% simple interest, and she invested in a bond fund that returns 4%. She invested three times as much in the stock as she did in the CD, and earned a total of $980 at the end of 1 yr. How much principal did she put in each investment? Sylvia invested S in the CD,S in the stock, and $ in the bond fund. the most important winemaking grape varietal is vitis zinfandel.