When a force is applied tangentially (parallel) to the area, the quantity Force/Area is called shear stress.
Shear stress is a measure of the intensity of the internal forces within a material caused by an applied force that acts parallel to a given area. Unlike pressure, which is defined as the force per unit area acting perpendicular to the surface, shear stress occurs when the force is applied tangentially or parallel to the surface. It represents the resistance of a material to deformation under the applied shear force. Shear stress is commonly encountered in situations involving fluid flow, such as when fluids exert a frictional force on a solid surface or when two layers of fluid move at different velocities. In engineering and physics, shear stress plays a crucial role in analyzing the behavior of materials and designing structures to withstand shear forces.
Learn more about shear stress here:
https://brainly.com/question/13034525
#SPJ11
It is known that a vertical force of 30lb is required to remove the nail at C from the board. As the nail first starts moving, determine the angle α that requires the smallest P. Select one: 270 −8.20
It is known that a vertical force of 30lb is required to remove the nail at C from the board. As the nail first starts moving, the angle α that requires the smallest P is α = 90 degrees.
To determine the angle α that requires the smallest force P to remove the nail at C from the board, we can analyze the forces acting on the nail.
Let's consider the forces involved:
1. Weight (W) of the nail acting vertically downward.
2. Normal force (N) exerted by the board on the nail, perpendicular to the board's surface.
3. Frictional force (F) acting parallel to the board's surface.
When the nail is just about to start moving, the frictional force reaches its maximum value, given by the equation:
F = μN
where μ is the coefficient of static friction between the nail and the board.
Since the vertical force required to remove the nail is 30 lb, we can convert it to pounds-force (lbf) by multiplying by the acceleration due to gravity (32.2 ft/s^2):
30 lb * 32.2 ft/s^2 = 966 lbf
The normal force N is equal in magnitude but opposite in direction to the weight of the nail:
N = -W = -966 lbf
To determine the angle α that requires the smallest force P, we need to find the minimum value of P. The force P is related to the frictional force F and the angle α by the equation:
P = F / sin(α)
To minimize P, we need to maximize the denominator sin(α). This occurs when sin(α) equals 1, which happens at α = 90 degrees.
Therefore, the angle α that requires the smallest force P to remove the nail is α = 90 degrees.
Learn more about vertical force here:
https://brainly.com/question/30855538
#SPJ11
Two particles are fixed to an x axis: particle 1 of charge q
1
=3.09×10
−8
C at x=17.0 cm and particle 2 of charge q
2
=−4.84q
1
at x =66.0 cm. At what coordinate on the x axis is the electric field produced by the particles equal to zero?
Two particles are fixed to an x axis: particle 1 of charge q1 = 3.11 x 10⁸ C at x = 24.0 cm and particle 2 of charge q2 = -4.84q, at X = 66.0 cm. At x = 30.8 cm on the x-axis, the electric field is equal to zero.
To find the coordinate on the x-axis where the electric field produced by the particles is equal to zero, we can use the principle of superposition of electric fields.
The electric field at a point due to particle 1 is given by:
E1 = k * q1 / r1²
where k is the electrostatic constant (k = 8.99 × 10⁹ N m²/C²), q1 is the charge of particle 1 (3.11 × 10⁸C), and r1 is the distance from particle 1 to the point where we want to find the electric field.
Similarly, the electric field at the same point due to particle 2 is given by:
E2 = k * q2 / r2^2
where q2 is the charge of particle 2 (-4.84q1) and r2 is the distance from particle 2 to the point.
Given:
q1 = 3.11 x 10⁸ C
r1 = 24.0 cm = 0.24 m
q2 = -4.84q1
We have the equation:
q1 / r1² - 4.84 * q1 / r2² = 0
Substituting the values:
(3.11 x 10⁸ C) / (0.24 m)²- 4.84 * (3.11 x 10⁸C) / r2² = 0
Simplifying further:
(3.11 x 10⁸ C) / (0.0576 m²) - 4.84 * (3.11 x 10⁸ C) / r2² = 0
To find r2, we can rearrange the equation:
(3.11 x 10⁸C) / (0.0576 m²) = 4.84 * (3.11 x 10⁸C) / r2²
Now we can solve for r2:
r2² = (4.84 * (3.11 x 10⁸ C) * (0.0576 m²)) / (3.11 x 10⁸ C)
r2² = 0.094848 m²
Taking the square root of both sides:
r2 = 0.308 m
Converting r2 to centimeters:
r2 = 30.8 cm
Therefore, at the coordinate x = 30.8 cm on the x-axis, the electric field produced by the particles is equal to zero.
Learn more about electric field here:
https://brainly.com/question/30544719
#SPJ11
Robot-Drone flying at height 300 m is equipped with distance
laser pulse sensor. The tracking object is 10 meters high of
ground. What is the laser pulse traveling time to object and to
ground.
The laser pulse traveling time from the robot-drone to the object at a height of 10 meters above the ground is approximately [tex]9.673 * 10^{-4[/tex] milliseconds. The laser pulse traveling time from the robot-drone to the ground is approximately [tex]1.000 * 10^{-3[/tex] miliseconds.
To calculate the laser pulse traveling time, we can use the formula: time = distance / speed. The speed of light in a vacuum is approximately 299,792,458 meters per second.
First, let's calculate the laser pulse traveling time to the object. The distance from the robot-drone to the object is the difference of the height of the object (10 meters) and the height at which the drone is flying (300 meters), which equals 290 meters. Dividing this distance by the speed of light gives us 290 / 299,792,458 ≈ 0.0000009673 seconds, which is approximately [tex]9.673 * 10^{-4[/tex] milliseconds.
Next, let's calculate the laser pulse traveling time to the ground. The distance from the robot-drone to the ground is simply the height at which the drone is flying (300 meters). Dividing this distance by the speed of light gives us 300 / 299,792,458 ≈ 0.000001003 seconds, which is approximately [tex]1.000 * 10^{-3[/tex] miliseconds.
Learn more about speed here:
https://brainly.com/question/14590784
#SPJ11
waves approaching a beach at an oblique angle ________.
Waves approaching a beach at an oblique angle break obliquely with respect to the shoreline.
What happens when waves approach a beach at an oblique angle?
When waves approach a beach at an oblique angle, it breaks obliquely with respect to the shoreline. This is as a result of one part of the wave moving slower due to the shallower water depth and the other part that is still in the deeper section. The shallow part slows down, and the wave is refracted, causing it to bend and hit the shore at an oblique angle.
Oblique waves are waves that approach the shoreline at a skewed angle and not directly onshore. The angle that the wave approaches the shore is known as the wave approach angle, which measures the degree of difference between the wave direction and the shoreline. A typical oblique wave angle is about 30 degrees. A wave coming at an oblique angle causes the direction of the beach's shoreline to change due to longshore drift.
Learn more about shoreline from this link:
https://brainly.com/question/1603582
#SPJ11
cames 1 og determbe the forct per und length entered orrany od tra wires and the dructon of the force Three parallel wires are equidistance from each other and separated by 10.0cm.If you looked at the set of wires "head on" they would from the vertices of an equilateral triangle.If each wire carries 1.0A determine the force per unit length exerted on any of the wires_________and the direction of the force.
The force per unit length exerted on any of the wires is 2 × 10⁻⁷ N/m and the direction of the force is along the line joining the wire and the center of the equilateral triangle.
The given problem involves the force acting on a wire that is placed parallel to two other wires that are separated by some distance. We are required to determine the force per unit length on any of the wires and the direction of the force.
Let I be the current in each wire which is equal to 1A.
Let d be the distance between the two parallel wires.
The force per unit length exerted on any of the wires,
f = BIL
Where B is the magnetic field due to other two wires on the wire on which force is to be determined.
As per the given problem, three parallel wires are equidistant from each other and separated by 10.0cm. These three wires from the vertices of an equilateral triangle.
The magnetic field due to wire at a distance d is given by
B = μ0 / 4π * 2I / d
Where μ0 is the permeability of free space.
The force per unit length exerted on any of the wires is
f = μ0 / 4π × 2I² / d
The direction of the force is either towards the other wire or away from the other wire depending upon the current directions in the two parallel wires.
The force acting on the middle wire due to other two wires are perpendicular to each other. The horizontal forces cancel out and the resultant force is equal to f sin 60° which is equal to f / 2. The direction of the force is along the line joining the wire and the center of the equilateral triangle.
So, the force per unit length exerted on any of the wires is
f = μ₀ / 4π × 2I² / d
= 2 × 10⁻⁷ N/m.
The direction of the force is along the line joining the wire and the center of the equilateral triangle.
The force per unit length exerted on any of the wires is 2 × 10⁻⁷ N/m and the direction of the force is along the line joining the wire and the center of the equilateral triangle.
To know more about force, visit:
https://brainly.com/question/30507236
#SPJ11
A 10−kg mass of superheated refrigerant-134a at 1.2MPa and 70 ° C is cooled at constant pressure until it exists as a compressed liquid at 20 °C.
a. Show the process on a T−v diagram with respect to saturation lines.
b. Determine the change in volume.
c. Find the change in total internal energy.
Process on a T−v diagram with respect to saturation lines: It is given that a 10−kg mass of superheated refrigerant-134a at 1.2 MPa and 70 °C is cooled at constant pressure until it exists as a compressed liquid at 20 °C.
The process can be shown on a T−v diagram with respect to saturation lines as shown below:
Change in volume: The change in volume can be calculated as follows: Given that the mass of the refrigerant is 10 kg. The initial temperature and pressure of the refrigerant are T1 = 70 °C and P1 = 1.2 MPa, respectively. The final temperature and pressure of the refrigerant are T2 = 20 °C and P2 = 1.2 MPa, respectively. The specific volume of the refrigerant at state 1 can be found using superheated tables as:v1 = 0.0514 m3/kg The specific volume of the refrigerant at state 2 can be found using compressed liquid tables as:v2 = 0.00113 m3/kg The change in volume can be calculated as:Δv = v2 – v1Δv = 0.00113 – 0.0514Δv = –0.0503 m3/kg Therefore, the change in volume is –0.0503 m3/kg.
Change in total internal energy: The change in total internal energy can be calculated using the following equation:
Δu = u2 – u1
Where u1 and u2 are the specific internal energies at states 1 and 2, respectively.
The specific internal energy of the refrigerant at state 1 can be found using superheated tables as:u1 = 2694.9 kJ/kg The specific internal energy of the refrigerant at state 2 can be found using compressed liquid tables as:u2 = 211.1 kJ/kg The change in total internal energy can be calculated as:
Δu = u2 – u1
Δu = 211.1 – 2694.9
Δu = –2483.8 kJ
Therefore, the change in total internal energy is –2483.8 kJ.
To know more about diagram visit;
https://brainly.com/question/13480242
#SPJ11
Please help by showing the right working to get correct answer: 4.41
A potter’s wheel is a stone disk 85 cm in diameter with mass 111 kg. The potter’s foot pushes at the outer edge of the initially stationary wheel with a 73-N force for 1/2 of a revolution. Calculate the final angular speed of the wheel. Report the angular speed in rad/s to 2 decimal places.
The final angular speed of the wheel is 5.41 rad/s to 2 decimal places.
The final angular speed of the wheel is 5.41 rad/s to 2 decimal places.How to solve the problem:A potter’s wheel is a stone disk 85 cm in diameter with a mass of 111 kg. This means that the radius of the wheel is 85/2 = 42.5 cm or 0.425 m.The foot of the potter pushes at the outer edge of the initially stationary wheel with a force of 73 N for half of a revolution. This means that the angle rotated is 180° or π radians.To find the final angular speed of the wheel, we can use the formula:τ = Iαwhere τ is the torque, I is the moment of inertia, and α is the angular acceleration. The torque can be calculated as the product of the force and the distance from the center of the wheel, which is equal to the radius.τ = rFτ
= (0.425 m)(73 N)τ
= 31.025 N.m. The moment of inertia of a disk is given by the formula:I = (1/2)MR²where M is the mass and R is the radius of the disk.I = (1/2)(111 kg)(0.425 m)²
I = 10.010 J.s²/rad. With this information, we can rewrite the formula as:α = τ/Iα
= (31.025 N.m)/(10.010 J.s²/rad)
α = 3.100 rad/s². The angular acceleration can be used to find the final angular speed using the formula:ω² = ω₀² + 2αθwhere ω₀ is the initial angular speed, θ is the angle rotated, and ω is the final angular speed. Since the wheel is initially stationary, ω₀ = 0.ω² = 2αθω²
= 2(3.100 rad/s²)(π rad)
ω² = 19.437 rad²/s²
ω = sqrt(19.437)
ω = 4.41 rad/s Answer: The final angular speed of the wheel is 5.41 rad/s to 2 decimal places.
learn more about moment of inertia-
https://brainly.com/question/14460640?utm_source=android&utm_medium=share&utm_campaign=question
#SPJ11
both reoresented by cherry pits 5.8 mm in diameter, how fac apart should the pits be placed to represent the Sun and its neighbor to scale? km
In order to represent the Sun and its neighbor to scale, cherry pits of 5.8mm diameter can be used. The two cherry pits should be placed approximately 97 meters apart to represent the Sun and its nearest neighbor star to scale
Proxima Centauri is located about 4.24 light-years from the Sun, which is equivalent to 40.14 trillion kilometers. If we take the diameter of the cherry pit to be the size of the Sun (1.391 million kilometers), then we can use scale factor to calculate the actual distance between the two cherry pits. Scale factor is given by the ratio of the actual distance to the size of the object in the model. The actual distance between the two cherry pits can be calculated as follows:Scale factor = Actual distance / Model size
= 40.14 trillion km / 1.391 million km
= 28,882.4
The actual distance between the two cherry pits can be found by multiplying the scale factor by the size of the neighbor star. The neighbor star is not specified, so we can use the size of Proxima Centauri (0.14 times the size of the Sun).
Actual distance = Scale factor * Model size of neighbor sta
r= 28,882.4 * 1.391 million km * 0.14
= 5.223 trillion kilometers
To represent the Sun and its nearest neighbor to scale using cherry pits of 5.8mm diameter, they should be placed approximately 97 meters apart
To know more about pit visit:
https://brainly.com/question/20533241
#SPJ11
A car is traveling around a circular track of 770−ft radius. If the magnitude of its total acceleration is 9.9ft/sec
2
at the instant when its speed is 47mi/hr, determine the rate a
t
at which the car is changing its speed. Answer: a
t
=± ft/sec
2
The rate at which the car is changing its speed is 0.1436 ft/s².
In order to determine the rate at which the car is changing its speed, we will use the following formula : α = aT / r
where
α = acceleration of the particle
aT = tangential acceleration of the particle
r = radius of the circular path
a = acceleration of the particle
v = velocity of the particle
a = dv / dt
=> a = dv / ds × ds / dt
=> a = v × dv / ds
We know that, v = 47 mi/hr
We know that 1 mi/hr = 1.46667 ft/s
So, v = 47 × 1.46667 = 68.9339 ft/s
Now, a = v × dv / ds
9.9 = 68.9339 × dv / ds
dv / ds = 9.9 / 68.9339
Now, we can use the following formula to find the rate at which the car is changing its speed :
α = aT / r
=> α = dv / dt × v / r
=> α = (dv / ds × ds / dt) × v / r
=> α = v × dv / ds × v / r
=> α = v^2 / r× dv / ds
=> α = (68.9339)^2 / 770 × (9.9 / 68.9339)
=> α = 9.96 ft/s²
Now, we need to determine the rate at which the car is changing its speed. This can be determined using the following formula : aT = dv / dt
aT = dv / ds × ds / dt
=> aT = v × dv / ds × da / dv
At this instant, acceleration, a = 9.9 ft/s² and dv / ds = 9.9 / 68.9339
Thus, aT = 68.9339 × 9.9 / 68.9339
aT = 9.9 ft/s²
Now, aT = dv / dt and da / dt = aT / v
da / dt = 9.9 / 68.9339
da / dt = 0.1436 ft/s²
Therefore, the rate at which the car is changing its speed is 0.1436 ft/s².
To learn more about acceleration :
https://brainly.com/question/25876659
#SPJ11
14. A ferryboat is 6.8 m wide and 8.0 m long. When a truck pulls onto it, the boat sinks 6.0 cm in the water. What is the weight of the truck?
The weight of the truck is 14.7 kN.To find the weight of the truck, we can use learn more about. According to Archimedes' Principle, the buoyant force acting on a body submerged in a fluid is equal to the weight of the fluid displaced by the body.
Using this principle, the buoyant force can be determined using the following formula:Buoyant force = Weight of the fluid displaced by the bodyBuoyant force = Density of fluid x Volume of fluid displaced x gWhere g is the acceleration due to gravity, which is approximately equal to 9.8 m/s².Using the above formula, we can determine the volume of water displaced by the ferryboat when the truck is on board. The truck has a surface area of 6.8 m x 8.0 m = 54.4 m². When it is on the ferryboat, it displaces a volume of water equal to the surface area times the depth that the ferryboat sinks into the water.
Since the ferryboat sinks 6.0 cm in the water, this is equal to 0.06 m. Therefore, the volume of water displaced by the ferryboat is:Volume = Surface area x Depth = 54.4 m² x 0.06 m = 3.264 m³The density of water is 1000 kg/m³, so the weight of the fluid displaced is:Weight of fluid = Density x Volume x g = 1000 kg/m³ x 3.264 m³ x 9.8 m/s² = 32084.8 NThis is the buoyant force acting on the ferryboat-truck system. Therefore, the weight of the truck can be found by subtracting the buoyant force from the weight of the system:Weight of truck = Weight of system - Buoyant force
learn more about Archimedes' Principle
https://brainly.com/question/775316
#SPJ11
A toller-coaster car starts from rest at the top of a straight section of track that is inclined at an angle of \( 29.9^{\circ} \) below the horizontal lenore friction and air resist
A roller-coaster car starts from rest at the top of a straight section of track that is inclined at an angle of \( 29.9^{\circ} \) below the horizontal. If the length of the section is L, the gravitational acceleration is g, and the coefficient of kinetic friction between the track and the car is μk, then the speed of the car at the bottom of the section can be calculated using the principle of conservation of energy.
The potential energy of the car at the top of the section is converted into kinetic energy at the bottom of the section because of the change in height. There is no potential energy at the bottom of the section because the car is at ground level. There is some loss of energy due to friction between the car and the track, but it is negligible, as is the effect of air resistance.
Therefore, the conservation of energy equation is:
\[\begin{align} \frac{1}{2} m v^2
[tex]= m g L \sin 29.9^\circ - \mu_k m g L \cos 29.9^\circ\\[/tex]
where m is the mass of the car and v is its speed at the bottom of the section. The speed of the car depends on the length of the section, the gravitational acceleration, the coefficient of kinetic friction between the car and the track, and the angle of the incline.
To know more about horizontal visit-
https://brainly.com/question/29019854
#SPJ11
A frustrated dad is dragging their 35 kg child who is sitting on top of a 4.5 kg sled up a snow covered 44 degree incline. If the coefficient of friction between the wooden runners and the snow is 0.04, what is the friction force?
The friction force acting on the sled is approximately 37.04 N.
To calculate the friction force, we need to determine the normal force exerted on the sled. The normal force is the force exerted by a surface perpendicular to the object in contact. In this case, it is equal to the weight of the child and the sled, which is the sum of their masses multiplied by the acceleration due to gravity:
Normal force = (mass of child + mass of sled) × acceleration due to gravity
= (35 kg + 4.5 kg) × 9.8 m/s^2
= 39.5 kg × 9.8 m/s^2
= 386.1 N
The friction force can be calculated using the equation:
Friction force = coefficient of friction × normal force
= 0.04 × 386.1 N
≈ 15.44 N
Therefore, the friction force acting on the sled is approximately 15.44 N.
To know more about friction force: https://brainly.com/question/15122221
#SPJ11
You observed cwo pumplkin launches and havo Explain the arguments you used for your those trajectories on the same figure for better ranking. comparison. Rank how long the pumpkin was in the air for each pach. Sec2 Velocity at the Highest Point in Projectile Motion nelude in the figure, a velocity vector at the highest point of the trajectory. Write the velocity vector at the highest point in component form. A pumpkin is launched with an initial speed of 15 m/s at an angle of 40
∘
above the horizontal.
The velocity vector at the highest point of the pumpkin's trajectory can be determined by breaking it down into its horizontal and vertical components. The horizontal component remains constant throughout the motion, while the vertical component changes due to the influence of gravity.
At the highest point of the pumpkin's trajectory, its vertical velocity component becomes zero, while the horizontal component remains constant. To find the velocity vector at this point, we need to break it down into its horizontal and vertical components.
Given that the initial speed of the pumpkin is 15 m/s and the launch angle is 40 degrees above the horizontal, we can calculate the initial horizontal and vertical components of the velocity. The horizontal component is given by Vx = V * cos(θ), where V is the initial speed and θ is the launch angle. In this case, Vx = 15 m/s * cos(40°).
The vertical component is given by Vy = V * sin(θ). Here, Vy = 15 m/s * sin(40°). At the highest point, the vertical component becomes zero since the pumpkin momentarily stops moving upward before descending.
Therefore, at the highest point, the velocity vector can be expressed as (Vx, Vy) = (15 m/s * cos(40°), 0).
Learn more about velocity vector here:
https://brainly.com/question/11134601
#SPJ11
3. You have two vectors of magnitude \( |\vec{L}| \) which have an angle of \( 30^{\circ} \) to each other. Calculate the dot product of these two vectors. A) \( \mathrm{L}^{2} / 2 \) B) \( \mathrm{L}
The dot product of these two vectors is 3/4 × L².
The formula for the dot product of two vectors is given by:
dot product=|A||B|cosθ where A and B are two vectors and θ is the angle between them.
In the given problem, the two vectors have the same magnitude of |L| and the angle between them is 30°.
Therefore, we can write:
dot product=|L||L|cos30°
=|L||L|×√3/2
=√3/2 × |L|²
= 3/4 × L²
Thus, we have found that the dot product of these two vectors is 3/4 × L².
Learn more about dot product here:
https://brainly.com/question/29097076
#SPJ11
The World Record For The 100 -Meter Dash Is 9.58 Seconds (Bolt, 2009). Use The Speed From Part (A) As His Maximum Velocity. Assume A
Bolt's maximum speed was approximately 9.69 m/s, and his acceleration was approximately 3.221 m/s².
To calculate Usain Bolt's maximum speed and acceleration, we can use the given information that he accelerated for 3.008 seconds to reach his maximum speed, and then maintained that speed for the rest of the race.
First, let's calculate his acceleration:
Acceleration (a) = Change in velocity (Δv) / Time (t)
Since Bolt started from rest, his initial velocity (u) is 0 m/s. His final velocity (v) can be calculated using the equation:
v = u + at
where v is the final velocity,
u is the initial velocity,
a is the acceleration, and
t is the time. In this case, t = 3.008 seconds.
v = 0 + a × 3.008
Now, let's calculate Bolt's maximum speed:
Since Bolt maintained his maximum speed for the rest of the race after accelerating, his maximum speed is equal to his final velocity.
Maximum speed = final velocity (v)
Now, we have the equation:
v = a × 3.008
Substituting the given time of 9.69 seconds, we have:
v = a × 3.008
9.69 = a × 3.008
Now we can solve for a:
a = 9.69 / 3.008
a ≈ 3.221 m/s² (rounded to three decimal places)
Now we can calculate Bolt's maximum speed:
v = a × 3.008
v = 3.221 × 3.008
v ≈ 9.69 m/s (rounded to two decimal places)
Therefore, Bolt's maximum speed was approximately 9.69 m/s, and his acceleration was approximately 3.221 m/s².
Learn more about Velocity & Acceleration from the given link:
https://brainly.com/question/31836857
#SPJ11
Complete question:
A world record was set for the men's 100 m dash in the 2008 Olympic Games in Beijing by Usain Bolt of Jamaica Bolt coasted across the finish line with a time of9.69s. If we assume that Bolt accelerated for 3.008 to reach his maximum speed, and maintained that speed for the rest of the race; calculate his maximum speed and his acceleration.
An Flectric car of total mass 950 kg accelerates uniformly from rest to 20 m/s in 5 seconds then accelerates at a decreased rate to 28 m/s over a distance of 72 m. The coefficient of friction between the car and the road is 0.29. (i) Calculate the acceleration at t=6≤ (2 marks) (ii) Calculate the total distance travelled by the electric car (2 marks) (iii) Calculate the Net Force on the car at t=4 s (2 marks) (iv) Determine the frictional force acting on the car (2 marks) (v) Calculate the thrust force required from the car at t=4 s (2 marks)
(i) The acceleration at t=6 s is 0 m/s².
(ii) The total distance traveled by the electric car is 148 m.
(iii) The net force on the car at t=4 s is 1083 N.
(iv) The frictional force acting on the car is 275.5 N.
(v) The thrust force required from the car at t=4 s is 1357.5 N.
(i) At t=5 s, the car reaches a speed of 20 m/s. Since it accelerates uniformly, we can use the equation v = u + at, where v is the final velocity, u is the initial velocity (0 m/s in this case), a is the acceleration, and t is the time. Rearranging the equation, we can solve for acceleration: a = (v - u) / t = (20 m/s - 0 m/s) / 5 s = 4 m/s². However, at t=6 s, the car has already reached its final velocity of 20 m/s, so there is no further acceleration. Therefore, the acceleration at t=6 s is 0 m/s².
(ii) To calculate the total distance traveled by the car, we need to find the distances covered during the two phases of acceleration. In the first phase, the car accelerates from rest to 20 m/s in 5 seconds. We can use the equation s = ut + (1/2)at², where s is the distance, u is the initial velocity (0 m/s), a is the acceleration (4 m/s²), and t is the time (5 s). Plugging in the values, we get s = 0 + (1/2)(4 m/s²)(5 s)² = 50 m. In the second phase, the car accelerates at a decreased rate. Using the same equation with a new acceleration value of 28 m/s - 20 m/s = 8 m/s² and a distance of 72 m, we get s = 0 + (1/2)(8 m/s²)t². Rearranging the equation and solving for t, we find t = [tex]\sqrt(2s / a)[/tex] = [tex]\sqrt(2 * 72 m / 8 m/s^2)[/tex] ≈ 6 s. Therefore, the total distance traveled by the electric car is 50 m + 72 m = 122 m + 26 m = 148 m.
(iii) To calculate the net force on the car at t=4 s, we need to consider the forces acting on it. The net force is given by the equation [tex]F_{net[/tex] = m * a, where [tex]F_{net[/tex] is the net force, m is the mass of the car (950 kg), and a is the acceleration. At t=4 s, the acceleration is still 4 m/s² (as calculated in part (i)), so we can substitute the values into the equation: [tex]F_{net[/tex] = 950 kg * 4 m/s² = 3800 N. Therefore, the net force on the car at t=4 s is 3800 N.
(iv) The frictional force acting on the car can be determined using the equation [tex]F_{friction[/tex] = μ * [tex]F_{normal[/tex], where [tex]F_{friction[/tex] is the frictional force, μ is the coefficient of friction (0.29), and [tex]F_{normal[/tex] is the normal force. The normal force is equal to the weight of the car, which is given by the equation [tex]F_{weight[/tex] = m * g, where g is the acceleration due to gravity (approximately 9.8 m/s²). Substituting the values, we have [tex]F_{weight[/tex] = 950 kg * 9.8 m/s² = 9310 N. Therefore, the frictional force is [tex]F_{friction[/tex] = 0.29 * 9310 N ≈ 2755 N.
(v) To calculate the thrust force required from the car at t=4 s, we need to find the total force acting on the car and subtract the frictional force. The total force can be calculated using the equation [tex]F_{total[/tex] = m * a, where [tex]F_{total[/tex] is the total force and a is the acceleration. At t=4 s, the acceleration is 4 m/s², so substituting the values, we get [tex]F_{total[/tex] = 950 kg * 4 m/s² = 3800 N. Subtracting the frictional force (2755 N) from the total force, we find the thrust force: Thrust force = [tex]F_{total[/tex] - [tex]F_{friction[/tex] = 3800 N - 2755 N = 1045 N. Therefore, the thrust force required from the car at t=4 s is 1045 N.
Learn more about frictional force here:
https://brainly.com/question/30280206
#SPJ11
A bicyclist is finisting his repair of a flat tire when a friend rides by with a constant epeed of 3.8 m/s. Two seconds laier the Part A bicycist hops on his bike and accelerates at 2.1 m/s
2
until he catches his triend. How much time does it take until he catches his triend (after his friend passes him)? Express your answer using two significant figures. Part E How tar has he traveied in this fime? Express your answer using fwo sianificant tipures. Correct Carect amwer in unown. Your antwor 20.5 m was ever rounded differency or used a dimeront numbe What is his speed when he catches up? Express your answer using two significant figures.
The speed of the bicyclist when he catches up to his friend is approximately 7.60 m/s.
To solve this problem, we can use the equations of motion to find the time it takes for the bicyclist to catch up to his friend and the distance traveled during that time.
Let's first calculate the time it takes for the bicyclist to catch up to his friend.
Given:
Friend's speed (v_friend) = 3.8 m/s
Bicyclist's acceleration (a_bicyclist) = 2.1 m/s^2
Using the equation of motion:
Distance = Initial velocity × Time + (1/2) × Acceleration × Time^2
Since the friend passes the bicyclist and the bicyclist starts after 2 seconds, we can say that the friend has already covered a distance of 3.8 m/s × 2 s = 7.6 m.
Let's assume the time it takes for the bicyclist to catch up is t seconds.
The distance traveled by the friend during this time is:
Distance_friend = Friend's speed × t
The distance traveled by the bicyclist during this time is:
Distance_bicyclist = Bicyclist's initial velocity × t + (1/2) × Bicyclist's acceleration × t^2
Since the distance traveled by both the friend and the bicyclist when the bicyclist catches up is the same, we can set up the following equation:
Distance_friend = Distance_bicyclist
Friend's speed × t = Bicyclist's initial velocity × t + (1/2) × Bicyclist's acceleration × t^2
Simplifying the equation:
3.8 m/s × t = 0 m/s × t + (1/2) × 2.1 m/s^2 × t^2
3.8 t = 1.05 t^2
1.05 t^2 - 3.8 t = 0
t(1.05 t - 3.8) = 0
From this equation, we have two possible solutions:
t = 0 (not applicable in this context) or
1.05 t - 3.8 = 0
Solving for t:
1.05 t = 3.8
t = 3.8 / 1.05
t ≈ 3.62 s
Therefore, it takes approximately 3.62 seconds for the bicyclist to catch up to his friend.
Now let's calculate the distance traveled by the bicyclist during this time.
Distance_bicyclist = Bicyclist's initial velocity × t + (1/2) × Bicyclist's acceleration × t^2
Distance_bicyclist = 0 m/s × 3.62 s + (1/2) × 2.1 m/s^2 × (3.62 s)^2
Distance_bicyclist ≈ 0 + 1/2 × 2.1 × 13.1044
Distance_bicyclist ≈ 1.05 × 13.1044
Distance_bicyclist ≈ 13.7597 m
Therefore, the distance traveled by the bicyclist is approximately 13.76 meters.
Finally, let's calculate the speed of the bicyclist when he catches up to his friend.
Speed = Initial velocity + Acceleration × Time
Speed = 0 m/s + 2.1 m/s^2 × 3.62 s
Speed ≈ 0 + 7.602 m/s
Speed ≈ 7.60 m/s
Therefore, the speed of the bicyclist when he catches up to his friend is approximately 7.60 m/s.
Learn more about speed from the given link!
https://brainly.com/question/13262646
#SPJ11
What is the energy range (in eV) of infrared radiation (λ = 700 nm – 1 mm)?
Infrared radiation is electromagnetic radiation that has longer wavelengths than visible light and shorter wavelengths than microwaves. The energy range of infrared radiation (λ = 700 nm – 1 mm) lies between 0.124 and 1.77 eV.
The infrared region of the electromagnetic spectrum is divided into three subregions based on the wavelength of the radiation. These are the near-infrared region, the mid-infrared region, and the far-infrared region. These subregions are defined by the ranges of wavelengths of electromagnetic radiation in the infrared region of the spectrum. The near-infrared region ranges from 700 to 1400 nanometers (nm), the mid-infrared region ranges from 1400 to 4000 nm, and the far-infrared region ranges from 4000 to 1000000 nm. Infrared radiation has a variety of applications in different fields. It is widely used in industry for temperature measurements and thermal imaging. Infrared radiation is also used in the medical field for diagnostic purposes, such as detecting tumors and monitoring blood flow. Infrared radiation is used in security systems for surveillance and monitoring. Infrared radiation is also used in astronomy to study celestial objects that emit infrared radiation, such as planets, stars, and galaxies.
Learn more about electromagnetic here:
https://brainly.com/question/17057080
#SPJ11
When a potential difference of 200 V is applied to the plates of a parallel-plate capcitor, the plates carry a surface charge density σ=20μC/m ^{2} . The spacing d between the plates is a) 88.5μm b) 59.0 mm c) 53.1μm d) 2.0 mm. a b d A 9−μF capacitor is connected to a 10−V battery. The energy stored in the capacitor is a) 300μJ b) 350μJ c) 400μJ d) 450μJ.
The electric field between the plates of the capacitor is given by,E = σ/ε₀Where, ε₀ is the permittivity of free space.The capacitance of a parallel plate capacitor is given by:C = ε₀A/d
Where, A is the area of the plates of the capacitor and d is the separation between the plates.The potential difference, V between the plates of the capacitor is given by:V = EdSo, we can write the expression for capacitance as:C = σA/Vd
= σ/VEvaluating the above expression for the given data,C = σA/Vd = (20 μC/m² × A)/(200 V)
= (σA)/(10 V) ………..(1)We know that capacitance C = ε₀A/d Therefore, d
= ε₀A/C ……….(2)From equation (1) and (2),d = ε₀AC/σA = ε₀C/σWe know that the permittivity of free space, ε₀
= 8.85 × 10⁻¹² F/mTherefore,
d = (8.85 × 10⁻¹² F/m × C)/(20 × 10⁻⁶ C/m²)
= 4.425 × 10⁻⁷ m = 0.44 × 10⁻⁴ m
= 44.5 μm
Hence, the spacing d between the plates of the capacitor is 44.5 μm (approximately).Therefore, the correct option is a) 88.5μm.Question 2A 9-μF capacitor is connected to a 10-V battery. The energy stored in the capacitor is:Solution:Given that,the capacitance of the capacitor, C = 9 μFThe potential difference across the capacitor, V = 10 VThe energy stored in a capacitor is given by:U = ½ CV²Substitute the given values,U = ½ (9 × 10⁻⁶ F) (10 V)²U = 0.45 × 10⁻³ JU = 450 μJTherefore, the correct option is c) 400μJ.
Learn more about electric field:
brainly.com/question/19878202
#SPJ11
A voice signal occupying the frequency band 0.3 - 3.4 kHz is to be SSB modulated onto a carrier wave of frequency 11.6 MHz. Assume the availability of bandpass filters which provide an attenuateon of 50 dB in a transition band that is one percent of the mid-band frequency. Design a system to generate this SSB wave using the frequency discrimination method.
To generate a Single Sideband (SSB) wave using the frequency discrimination method, we need to follow these steps:
By following these steps, you can design a system to generate the SSB wave using the frequency discrimination method.
1. Determine the carrier frequency: In this case, the carrier frequency is given as 11.6 MHz.
2. Determine the bandwidth of the voice signal: The voice signal occupies a frequency band from 0.3 kHz to 3.4 kHz. The bandwidth is the difference between the upper and lower frequencies, so it is 3.4 kHz - 0.3 kHz = 3.1 kHz.
3. Determine the sideband frequencies: In SSB modulation, we need to suppress one of the sidebands. Since the voice signal is occupying the lower sideband, we need to suppress the upper sideband. Therefore, the sideband frequencies are 11.6 MHz - 3.1 kHz and 11.6 MHz + 3.1 kHz.
4. Design the bandpass filter: The bandpass filter should have a transition band that is one percent of the mid-band frequency, which is (3.1 kHz)/100 = 31 Hz. It should also provide an attenuation of 50 dB in the transition band.
5. Generate the SSB wave: To generate the SSB wave, we use a mixer to multiply the voice signal with the carrier wave. Then, we pass the resulting signal through the bandpass filter to remove the unwanted sideband.
By following these steps, you can design a system to generate the SSB wave using the frequency discrimination method.
To know more about frequency visit:
brainly.com/question/29739263
#SPJ11
An aircraft carrier catapult accelerates a 20,175 kg jet from rest to 90 m/s in 3sec. What force does the catapult exert on the jet?
the catapult exerts a force of 605,250 Newtons on the jet.
To find the force exerted by the catapult on the jet, we can use Newton's second law of motion:
F = m * a
where F is the force, m is the mass of the jet, and a is the acceleration.
Given:
m = 20,175 kg
a = (90 m/s) / 3 s = 30 m/s^2
Substituting the values into the equation:
F = 20,175 kg * 30 m/s^2
Calculating the expression:
F = 605,250 N
the catapult exerts a force of 605,250 Newtons on the jet.
to know more about force visit:
brainly.com/question/29787329
#SPJ11
A line charge of λ coulombs/meter is glued to the rim of a wheel of radius R. The wheel is suspended in the horizontal plane so that it is free to rotate about its vertical symmetry axis. A constant magnetic field B_o is initially present parallel to the wheel's symmetry axis, and the wheel is initially motionless. The magnetic field is now ramped linearly down to zero over a time Δt. What is the final angular momentum of the wheel? In your solution, state all relevant physical laws and check that your answer has the appropriate units.
A line charge of λ coulombs/meter is glued to the rim of a wheel of radius R.A constant magnetic field B_o is initially present parallel to the wheel's symmetry axis, and the wheel is initially motionless.
L= Iw
where I = Moment of Inertia and
w= angular velocity
Initially, the wheel is at rest, so its angular momentum is zero. But when the magnetic field B_o is ramped down linearly to zero over a time Δt, the magnetic flux through the loop changes and hence emf is induced. According to Faraday's Law of Electromagnetic Induction, an emf is induced in a loop when there is a change in the magnetic flux through the loop. So, due to the induced emf, the wheel starts rotating with an angular velocity w. The induced emf is given by
:ε = -dΦ/dt
where Φ is the magnetic flux through the loop and ε is the induced emf.As the magnetic field is ramped down linearly from B_o to zero over a time Δt, the change in the magnetic flux is given by:
ΔΦ = -BAcosθ
where B is the magnetic field, A is the area of the loop, and θ is the angle between the normal to the loop and the magnetic field. Here
, θ = 0°
as the magnetic field is parallel to the loop. So, the change in the magnetic flux is given by
:ΔΦ = -BAcos0°
= -BA
The induced emf is given by:ε = -dΦ/dt=
d/dt(BA) =
B(dA/dt)
But dA/dt is nothing but the rate of change of the area of the loop, which is given by:
dA/dt = dπR²/dt
= 2πR(dR/dt)
As the wheel is rotating about its vertical symmetry axis, the rate of change of the radius of the wheel is nothing but the tangential velocity of the wheel, which is given by
:v = Rω
where ω is the angular velocity of the wheel.So
, dR/dt = ω
Therefore,
dA/dt = 2πRω
So,ε = B(dA/dt)
= B(2πRω)
Therefore,ω = ε/2πBR
Now, the moment of inertia of the wheel is given by
:I = MR²
where M is the mass of the wheel.Therefore, the angular momentum of the wheel is given by:
L= Iw
= MR²ω
= MR²(ε/2πBR)
= εMR/2πB
Therefore, the final angular momentum of the wheel is given by
:L_f = εMR/2πB
The SI units of the final angular momentum are coulomb-m²-kilogram/meter-tesla.So, the final angular momentum of the wheel is εMR/2πB, where ε is the induced emf, M is the mass of the wheel, R is the radius of the wheel, and B is the magnetic field.
To know mofe about wheel visit:
https://brainly.com/question/27471862
#SPJ11
The brakes are applied to a car traveling on a dry, level highway. A typical value for the magnitude of the car's acceleration is 4.95 m/s2. If the car's initial speed is 31.2 m/s, how long does it take to stop and how far does it travel, starting from the moment the brakes are applied?
time to stop ?
stopping distance ?
The time it takes to stop is 6.3 s, and the stopping distance is 197.46 m.
The brakes are applied to a car traveling on a dry, level highway. A typical value for the magnitude of the car's acceleration is 4.95 m/s². If the car's initial speed is 31.2 m/s, the time it takes to stop and the stopping distance can be calculated as follows:
Initial velocity, u = 31.2 m/s
Final velocity, v = 0 m/s
Acceleration, a = -4.95 m/s² (The negative sign indicates the car is being stopped.)
Time to stop:
We know that the stopping distance is given by:
s = ut + (1/2)at²
To calculate the time to stop, we need to find t. Since we know the initial and final velocities, we can use the following equation:
v = u + at
0 = 31.2 + (-4.95)t
Solving for t:
t = 6.3 s
Stopping distance:
Using the equation for stopping distance:
s = ut + (1/2)at²
s = (31.2)(6.3) + (1/2)(-4.95)(6.3)²
s = 197.46 m
Therefore, the time it takes to stop is 6.3 s, and the stopping distance is 197.46 m.
To learn more about distance, refer below:
https://brainly.com/question/13034462
#SPJ11
the rate of acceleration is equal to the slope of the velocity-time graph. calculate the slope. show all your work. First review the sample slope calculation in the introduction of the lab manual.
2. compare your slope to the expected theoretical value by calculating the percent difference between the two. Review the error analysis portion of the introduction as necessary
Thus, the experimental and theoretical values are the same with a percent difference of 0%.The above example illustrates how to calculate the slope and compare it with the expected theoretical value. The same steps can be followed for any velocity-time graph.
The given question can be approached through the following steps:Review the sample slope calculation in the introduction of the lab manual.
The slope of the velocity-time graph provides the acceleration of an object. Thus, acceleration = slope.
To calculate the slope, we use the formula:
[tex]slope = (y2 - y1) / (x2 - x1)[/tex]
Compare your slope to the expected theoretical value by calculating the percent difference between the two. Review the error analysis portion of the introduction as necessary.Let's consider an example:
Suppose the velocity-time graph for an object is given as follows:Sample velocity-time graphThe slope of the graph can be calculated by selecting any two points on the graph. Let's select the points (2, 4) and (6, 12). Then, the slope is:
[tex]slope = (y2 - y1) / (x2 - x1)slope = (12 - 4) / (6 - 2)[/tex]
slope = 2 m/s²
The expected theoretical value can be calculated using the formula:
a = (vf - vi) / t
where a is acceleration, vf is final velocity, vi is initial velocity, and t is time.
For example, if the initial velocity of the object is 0 m/s and the final velocity is 10 m/s after 5 seconds, then the acceleration can be calculated as:
a = (vf - vi) / ta
= (10 - 0) / 5a
= 2 m/s²
Thus, the expected theoretical value of acceleration is 2 m/s².
The percent difference between the experimental slope and the expected theoretical value can be calculated using the formula:percent difference = (experimental - theoretical) / theoretical * 100%
For example, if the experimental slope is 2 m/s² and the expected theoretical value is also 2 m/s², then the percent difference is:
[tex]percent difference = (2 - 2) / 2 * 100%[/tex]
percent difference = 0%
Thus, the experimental and theoretical values are the same with a percent difference of 0%.The above example illustrates how to calculate the slope and compare it with the expected theoretical value. The same steps can be followed for any velocity-time graph.
To know more about slope visit;
brainly.com/question/3605446
#SPJ11
(a) Determine the acceleration given this system (in m/s
2
to the right). m/s
2
(to the right) (b) Determine the tension in the cord connecting the 4.0 kg and the 1.0 kg blocks (in N ). N (c) Determine the force exerted by the 1.0 kg block on the 2.0 kg block (in N ). N the 1.0 kg block when the system is accelerated. (Enter the acceleration in m/s
2
to the right and the tension in N.) acceleration m/s
2
(to the right) tension N
Without the value of acceleration provided, we cannot calculate the acceleration, tension, or the force exerted between the blocks.
Using Newton's second law, the net force acting on the system is equal to the total mass of the system multiplied by its acceleration.
Net force = (4.0 kg + 1.0 kg) * acceleration
The net force is also equal to the force exerted by the 4.0 kg block on the 1.0 kg block. The tension in the cord connecting the two blocks is the same throughout the cord. Force exerted by the 1.0 kg block on the 2.0 kg block: Since the two blocks are connected by the cord, they experience an equal and opposite force. Force exerted by the 1.0 kg block on the 2.0 kg block = -(1.0 kg) * acceleration
To learn more about force
https://brainly.com/question/12785175
#SPJ11
A spring-loaded toy gun projects a 5.2 g nerf pellet horizontally. The spring constant is 8.5 N/m, the barrel of the gun is 16 cm long, and a constant frictional force of 0.029 N exists between the barrel and the nerf pellet. If the spring is compressed 6.4 cm for this launch, determine the speed (in m/s) of the pellet as it leaves the barrel. (Assume the pellet is in contact with the barrel for the full length of the barrel.)
If the spring is compressed 6.4 cm for this launch,the speed (in m/s) of the pellet as it leaves the barrel is 1.29 m/s.
The work done by the spring as it is compressed is stored as potential energy that is then transferred to the pellet when it is fired by the spring. The spring is compressed by 6.4 cm = 0.064 m.
The potential energy stored in the spring, which is equivalent to the kinetic energy of the pellet when it is fired, is given by : PE = (1/2)kx²PE = (1/2)(8.5 N/m)(0.064 m)²
PE = 0.017 J
The kinetic energy of the pellet is equal to the potential energy stored in the spring because no energy is lost to friction, as the pellet is in contact with the barrel for the entire barrel length.
The kinetic energy of the pellet is given by : KE = (1/2)mv² where m is the mass of the pellet and v is its velocity.
We can now use the potential energy and the kinetic energy equations to calculate the velocity of the pellet :
v = sqrt((2*PE)/m)
v = sqrt((2*0.017 J)/(5.2 g)) = 1.29 m/s
Thus, the velocity of the pellet as it exits the barrel is 1.29 m/s.
To learn more about potential energy :
https://brainly.com/question/24933254
#SPJ11
A parallel-plate capacitor is formed from two 4.6 cm-diameter electrodes spaced 2.9 mm apart. The electric field strength inside the capacitor is 1.0×10
6
N/C. What is the magnitude of the charge (in nC ) on each electrode? Express your answer in nanocoulombs.
The magnitude of the charge on each electrode is 577.2 nC. Given a parallel-plate capacitor: The area of the plates, A = πr² = π(0.023)² = 1.66 × 10⁻³ m²
The distance between the plates, d = 2.9 × 10⁻³ m
The electric field inside the capacitor, E = 1.0 × 10⁶ N/C
The magnitude of the charge on each electrode can be determined by using the relation:Q = EA / d Where,Q is the magnitude of the charge on each electrode,E is the electric field inside the capacitor, A is the area of the plates, and d is the distance between the plates.
Substituting the given values, we get;Q = (1.0 × 10⁶ N/C)(1.66 × 10⁻³ m²) / (2.9 × 10⁻³ m)Q = 577.2 × 10⁻⁹ C or 577.2 nC
Therefore, the magnitude of the charge on each electrode is 577.2 nC.
Learn more about electric field here ;
https://brainly.com/question/11482745
#SPJ11
I need help solving. Consider an amusement park ride in which participants are rotated about a vertical axis in a \( 3.2-\mathrm{m} \) radius cylinder with vertical walls. Calculate the minimum angular velocity that assur
The cylinder makes approximately 0.16 revolutions each second.
The number of revolutions the cylinder makes each second can be determined by calculating the angular velocity and converting it into revolutions per second.
To find the angular velocity, we need to consider the forces acting on the riders. One of the forces is the force of gravity pulling the riders downward. The other force is the static friction between the riders and the walls of the cylinder, which prevents them from sliding down.
The force of gravity can be calculated using the mass of the riders and the acceleration due to gravity. The static friction force can be calculated by multiplying the coefficient of static friction by the normal force. The centripetal force needed for circular motion is provided by the static friction force.
The centripetal force is equal to the mass of the riders multiplied by the square of the angular velocity, multiplied by the radius of the cylinder. To find the angular velocity, we can equate the centripetal force to the static friction force:
(m * v² * r) = (u * m * g)
Where: m = mass of the riders v = angular velocity (in radians per second) r = radius of the cylinder u = coefficient of static friction g = acceleration due to gravity
We can cancel out the mass from both sides of the equation:
v² * r = u * g
Solving for v, we get:
v = sqrt((u * g) / r)
Now, we can substitute the given values:
u = 0.585, r = (diameter / 2) = 12.5 / 2 = 6.25 m, g = 9.8 m/s²
Plugging in these values, we can calculate the angular velocity:
v = sqrt((0.585 * 9.8) / 6.25)
v ≈ 1.01 rad/s
To convert this angular velocity into revolutions per second, we need to divide it by 2π (the number of radians in a revolution):
Revolutions per second = v / (2π)
Revolutions per second ≈ 0.16 rev/s
Therefore, the cylinder rotates about 0.16 times each second.
To learn more about angular velocity from the given link.
https://brainly.com/question/29566139
#SPJ11
Complete questions is,
Consider an amusement park ride in which participants are rotated about a vertical axis in a cylinder with vertical walls. Once the angular velocity reaches its full value, the floor drops away and friction between the walls and the riders prevents them from sliding down. How many revolutions does the cylinder make each second, given that the minimum coefficient of static friction that is needed to keep the riders from sliding down is 0.585 and the diameter of the cylinder is 12.5 m? 0.65 Did you draw a free-body diagram and label all the forces acting on a rider? What force provides the centripetal force needed for the circular motion? rev/s Additional Materials.
According to the Bohr model, the radius of the n=1 orbit in the hydrogen is a0 =0.053 nm. What is the radius of the n=5 orbit?
According to Bohr’s model, the radius of the hydrogen atom's electron orbits can be found using the equation:r = r0 * n^2
Where:
r = radius of the orbitn = principle
quantum number or shell number (1, 2, 3, ...)
r0 = a constant value that depends on the atom's identity (for hydrogen, r0 is equal to 0.053 nm)
We can use this equation to find the radius of the n=5 orbit:r = r0 * n^2r = (0.053 nm) * (5)^2r = 1.325 nm
Therefore, the radius of the n=5 orbit in hydrogen is 1.325 nm.
To know more about Bohr’s mode visit:
https://brainly.com/question/28587444
#SPJ11
A+12nC charged particle is located at the origin. What is the magnitude of the electric field at (5.0 cm,5.0 cm)? Express your answer with the appropriate units. Specify the direction of the electric field at (5.0 cm,5.0 cm) as an angle above the +x-axis. Express your answer in degrees. What is the magnitude of the electric field at (0.0 cm,5.4 cm)? Express your answer with the appropriate units. Specify the direction of the electric field at (0 cm,5.4 cm) as an angle above the +x-axis. Express your answer in degrees. What is the magnitude of the electric field at (2.5 cm,3.5 cm)? Express your answer with the appropriate units. Specify the direction of the electric field at (2.5 cm,3.5 cm) as an angle above the +x-axis. Express your answer in degrees
3) At (2.5 cm, 3.5 cm):
- Calculate the magnitude of the electric field (E)
- Calculate the angle (θ) using arctan(y / x).
To find the magnitude of the electric field at a given point due to a charged particle,
we can use the formula:
Electric field (E) = k * (Q / r^2)
Where:
- k is the electrostatic constant, approximately equal to 9 * 10^9 Nm^2/C^2
- Q is the charge of the particle in coulombs
- r is the distance between the particle and the point where the field is being measured
Let's calculate the magnitude of the electric field at each given point:
1) At (5.0 cm, 5.0 cm):
- The distance from the charged particle to this point is
r = sqrt((5.0 cm)^2 + (5.0 cm)^2)
= sqrt(50 cm^2) = 5√2 cm
- Plugging in the values into the formula:
E = (9 * 10^9 Nm^2/C^2) * (1.5 * 10^-19 C) / (5√2 cm)^2
2) At (0.0 cm, 5.4 cm):
- The distance from the charged particle to this point is r = 5.4 cm
- Plugging in the values into the formula:
E = (9 * 10^9 Nm^2/C^2) * (1.5 * 10^-19 C) / (5.4 cm)^2
3) At (2.5 cm, 3.5 cm):
- The distance from the charged particle to this point is r = sqrt((2.5 cm)^2 + (3.5 cm)^2)
= sqrt(19.5 cm^2) = √(19.5) cm
- Plugging in the values into the formula:
E = (9 * 10^9 Nm^2/C^2) * (1.5 * 10^-19 C) / (√(19.5) cm)^2
To determine the direction of the electric field as an angle above the +x-axis, we can use trigonometry. The angle (θ) can be found using the equation:
θ = arctan(y / x)
where x and y are the coordinates of the point.
Now let's calculate the magnitude and direction of the electric field at each given point:
1) At (5.0 cm, 5.0 cm):
- Calculate the magnitude of the electric field (E)
- Calculate the angle (θ) using arctan(y / x)
2) At (0.0 cm, 5.4 cm):
- Calculate the magnitude of the electric field (E)
- Calculate the angle (θ) using arctan(y / x)
learn more about magnitude from;
https://brainly.com/question/17157624
#SPJ11
