Prepare a flow sheet for the preparation of triphenylmethanol. Using your knowledge of the physical properties of the solvents, reactants, and products, show how the products can be purified. Indicate which layer should contain the product in the liquid/liquid extraction steps.

Answer:

which class are you please mention

Answer:

An atom is the smallest particle of an element that can take part in chemical reaction.

Explanation:

hope it will help u Amri

Answer:

Spontaneous processes are ones that occur quickly and have a low activation energy. - False -

Spontaneous processes always require an input of energy to overcome the activation energy, but always react quickly - False

Spontaneous processes can occur slowly, but always have a low activation- false

Spontaneous reactions can react slowly and can have a high activation energy - True

Spontaneous processes always react slowly and always have a high activation energy- False

Explanation:

A spontaneous reaction is reaction that proceeds on its own without us having to do a thing at all!

A spontaneous reaction may be fast or slow depending on the activation energy of the reaction. A spontaneous reaction having a high activation energy will be slow. However, if the spontaneous reaction has a low activation energy then it will be fast.

We have to note here that a spontaneous reaction proceeds without a prolonged input energy. Sometimes energy may be supplied to the reaction at the beginning for instance in the case of the combustion of hydrocarbons.

So, spontaneous processes are not necessarily fast. Some of them may have a very high activation energy such as in the rusting of iron hence they are slow.

Answer:

I think its A maybe am not sure

Answer:

ΔH = 2.68kJ/mol

Explanation:

The ΔH of dissolution of a reaction is defined as the heat produced per mole of reaction. We have 3.15 moles of the solid, to find the heat produced we need to use the equation:

q = m*S*ΔT

Where q is heat of reaction in J,

m is the mass of the solution in g,

S is specific heat of the solution = 4.184J/g°C

ΔT is change in temperature = 11.21°C

The mass of the solution is obtained from the volume and the density as follows:

150.0mL * (1.20g/mL) = 180.0g

Replacing:

q = 180.0g*4.184J/g°C*11.21°C

q = 8442J

q = 8.44kJ when 3.15 moles of the solid react.

The ΔH of the reaction is:

8.44kJ/3.15 mol

= 2.68kJ/mol

Answer:

5.0 × 10⁻⁶

Explanation:

Step 1: Write the balanced equation for the solution of chromium(III) iodate

Cr(IO₃)₃(s) ⇄ Cr³⁺(aq) + 3 IO₃⁻(aq)

Step 2: Calculate the solubility product constant (Ksp)

To relate Ksp and the solubility (S), we will make an ICE chart.

        Cr(IO₃)₃(s) ⇄ Cr³⁺(aq) + 3 IO₃⁻(aq)

I                               0                 0

C                             +S              +3S

E                                S               3S

The solubility product constant is:

Ksp = [Cr³⁺] × [IO₃⁻]³ = S × (3S)³ = 27 S⁴ = 27 × (2.07 × 10⁻²)⁴ = 5.0 × 10⁻⁶

Answer:

Molar volume, or volume of one mole of gas , depends on pressure and temperature, and is 22.4 liters - at 0 °C (273.15 K) and 1 atm (101325 Pa), or STP (Standard Temperature and Pressure), for every gas which behaves similarly to an ideal gas. The ideal gas molar volume increases to 24.0 liters as the temperature increases to 20 °C (at 1 atm).

Answer:

The answer is "170.9 mm Hg".

Explanation:

[tex]\text{Mass of acetone = volume} \times density[/tex]

                          [tex]= 70.0 \times 0.791\\\\ = 55.37\ g\\[/tex]

[tex]\text{Moles of acetone} = \frac{mass}{molar\ mass}\\\\[/tex]

                            [tex]=\frac{55.37}{58.08}\\\\ = 0.9533\ mol[/tex]

[tex]\text{Mass of ethyl acetate = volume} \times density[/tex]

                                   [tex]= 73.0 \times 0.900\\\\ = 65.7\ g[/tex]  

[tex]\text{Moles of ethyl acetate = mass} \times\ molar\ mass[/tex]

                                    [tex]= \frac{65.7}{88.105} \\\\= 0.7457\ mol[/tex]

[tex]\text{Mole fraction of acetone x(acetone)} = \frac{0.9533}{(0.9533 + 0.7457)}\ = 0.5611\\\\[/tex] [tex]\text{Mole fraction of ethyl acetate x(ethyl acetate)} =\frac{0.7457}{(0.9533 + 0.7457) }= 0.4389[/tex]

Applying Raoult's law: [tex]\text{Vapor pressure = x(acetone)P(acetone) + x(ethyl acetate)P(ethyl acetate)}\\\\= 0.5611 \times 230.0 + 0.4389 \times 95.38\\\\ = 170.9\ mm \ Hg\\[/tex]

The solvent for an organic reaction is prepared by mixing 70.0 mL of acetone (C3H6O) with 75.0 mL of ethyl acetate (C4H8O2).

The vapor pressure of the stored mixture is: 170.03 mmHg

In the given information, there is some information that is still missing.

The parameters that we are being given include:

The  first step we need to take is to determine the mass and number of moles  of each compound (i.e. for acetone and ethyl acetate)

For us to do that:

We need the density of acetone and ethyl acetate, which is not given:

Assuming that at a standard condition of vapour pressure:

Then;

Using the relation:

[tex]\mathbf{Density = \dfrac{Mass}{volume}}[/tex]

Mass of acetone = Density of acetone × volume of acetone

Mass of acetone = 0.791  g/mL  × 70.0 mL

Mass of acetone = 55.37 g

Mass of ethyl acetate = Density of ethyl acetate  × volume of ethyl acetate

Mass of ethyl acetate = 0.900 g/mL  ×  75.0 mL

Mass of ethyl acetate = 67.5 g

At standard conditions;

Now, using the formula for calculating the numbers of moles which can be expressed as:

[tex]\mathbf{Number \ of \ moles = \dfrac{mass}{molar \ mass}}[/tex]

For acetone:

[tex]\mathbf{Number \ of \ moles = \dfrac{55.37 \ g}{58.08 \ g/mol}}[/tex]

[tex]\mathbf{Number \ of \ moles =0.95334 \ mol}[/tex]

For ethyl acetate:

[tex]\mathbf{Number \ of \ moles = \dfrac{67.5 \ g}{88.11 \ g/mol}}[/tex]

[tex]\mathbf{Number \ of \ moles =0.76609 \ mol}[/tex]

Now, we will determine the mole fraction of each compound.

The mole fraction describes the ratio a certain constituent of a mixture to the total amount of all the constitutent in the mixture.

Using the formula:

[tex]\mathbf{mole \ fraction = \dfrac{n_A}{n_A+n_B+...n_N}}[/tex]

For Acetone:

[tex]\mathbf{mole \ fraction = \dfrac{0.95334}{0.95334+0.76609}}[/tex]

[tex]\mathbf{mole \ fraction =0.5545 }[/tex]

For ethyl acetate:

[tex]\mathbf{mole \ fraction = \dfrac{0.76609}{0.76609+0.95334}}[/tex]

[tex]\mathbf{mole \ fraction =0.4455}[/tex]

Finally, we can compute determine the vapour pressure of the stored mixture using Raoult's Law.

Raoult's Law posits that the constituent of a partial pressure in a mixture of a liquid is proportional to the mole fraction of that constituent in the mixture provided the temperature is constant.

∴ For the stored mixture = Vapor pressure of acetone + vapour pressure of ethyl acetate.

where:

For acetone;

Vapor pressure = 0.5545 × 230 mmHg

Vapour pressure = 127.54 mmHg

For ethyl acetate:

Vapour pressure = 0.4455 × 95.38 mmHg

Vapour pressure ==42.49 mmHg

Thus, the vapor pressure of the stored mixture is

= (127.54 + 42.49 ) mmHg

= 170.03 mmHg

Therefore, we can conclude that the vapour pressure of the stored mixture is 170.03 mmHg

Learn more about Vapour pressure here:

https://brainly.com/question/16931217?referrer=searchResults

Answer:

The 3d and 4s orbitals are completely filled, and the 4p orbital is partially filled.

Explanation:

The correct answer is: The 3d and 4s orbitals are completely filled, and the 4p orbital is partially filled.

The d orbital contains 10 electrons, the s orbital takes 2 electrons and the p orbital takes six electrons.

The orbital in chemistry is defined as a region in space where there is a high probability of finding an electron. There are s, p, d, f orbitals in chemistry which correspond to sharp, principal, diffuse and fundamental.

The electronic configuration of arsenic is 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p3.

From this electronic configuration, we can see that the 4s and 3d orbitals are half filled while the 4p orbital is half filled.

For more about electronic configuration, see:

https://brainly.com/question/4949433

Answer:

[tex]C_t=0.165M[/tex]

Explanation:

From the question we are told that:

Slope [tex]K=0.056 M-1 s -1[/tex]

initial Concentration [tex]C_1=2.2M[/tex]

Time [tex]t=100[/tex]

Generally the equation for Raw law is mathematically given by

[tex]\frac{1}{C}_t=kt+\frac{1}{C}_0[/tex]

[tex]\frac{1}{C}_t=0.056*100+\frac{1}{2.2}_0[/tex]

[tex]C_t=0.165M[/tex]

The second-order reaction is the reaction that depends on the reactants of the first or the second-order reaction. The concentration after 100 seconds will be 0.165 M.

The specific rate constant (k) of the second-order reaction is given in L/mol/s or per M per s. It is the proportionality constant that gives the relation between the concentration and the rate of the reaction.

Given,

Slope (k)= 0.056 per M per s

Initial concentration of the reactant [tex](\rm C_{1})[/tex] = 2.2 M

Time (t) = 100 seconds

The concentration of the reaction after 100 seconds can be given by,

[tex]\rm \dfrac{1}{C_{t}} = kt + \dfrac{1}{C_{1}}[/tex]

Substitute values in the above equation:

[tex]\begin{aligned} \rm \dfrac{1}{C_{t}} &= 0.056 \times 100 + \dfrac{1}{2.02}\\\\&= 0.165 \;\rm M\end{aligned}[/tex]

Therefore, after 100 seconds the concentration is 0.165 M.

Learn more about the order of reaction here:

https://brainly.com/question/14810717

Answer:

radical-initiated

Explanation:

Radical-initiated polymerization is unpredictable and difficult to control. The reaction proceeds indiscriminately and produces shortened chains, loops, and branches that create holes in the polymer. This reduces its mass to volume ratio.

Answer:

we don't understand why humans have only 46 chromosomes

Answer:

46 chromosomes is what we don't understand

Answer:

It is known that 1 mol of a molecule contains 6.023×1023 6.023 × 10 23 number of molecules. So, 0.25 moles of CO2 C O 2.

The correct option for the given question about Mole Concept is Na / 2 atom of oxygen.

In 1 mole number of molecules of CO₂ = Na (Avagadro Number)

In 0.25 mole number of molecules of CO₂ = 0.25 × Na molecules

In 1 molecule number of oxygen atom = 2 atom

In 0.25 × Na molecules number of oxygen atom = 2 × 0.25 × Na atom

In 0.25 × Na molecules number of oxygen atom = 0.5 × Na atom

So in 0.25 mole of CO₂ number of oxygen atom = Na / 2 atom

Thus we can conclude that in 0.25 mole of CO₂ number of oxygen atom will be Na / 2, where Na is Avagadro Number.

Learn more about Mole Concept here:

https://brainly.com/question/16488605

#SPJ2

Answer:

Neither Tech A nor B is correct

Explanation:

Combustion is a chemical reaction that occurs when a chemical molecule(s) interacts quickly with oxygen and produces heat.

When hydrocarbon undergoes a complete combustion reaction, they produce water and CO2.

Tech B is also incorrect because the main purpose of a catalytic converter is to accelerate and speed up the chemical reaction rates, Hence, they are not involved in chemical reaction formation. Catalytic converters are utilized as a control device in exhaust emission to lessen the effect of toxic gas fumes.

Answer:

The concentration of KOH is  0.06137 M

Explanation:

Step 1: Data given

Molar mass of KHP = 204.22 g/mol

Mass of KHP = 0.4877 grams

Volume of water = 50 mL

Volume of KOH solution = 38.91 mL

Step 2: The balanced equation

C8H5KO4 + KOH ⇒ C8H4K2O4+ H2O

Step 3: Calculate number of moles of KHP

Moles = Mass / molar mass

Moles KHP = 0.4877 grams / 204.22 g/mol

Moles KHP = 0.002388 moles

Step 4: Calculate moles of KOH

For 1 mol KHP we need 1 mol KOH to produce 1 mol C8H4K2O4 and 1 mol H2O

For 0.002388 moles KHP we need 0.002388 moles KOH

Step 5: Calculate the concentration of KOH

Concentration = moles / volume

Concentration of KOH = 0.002388 moles / 0.03891 L

Concentration of KOH = 0.06137 M

The concentration of KOH is  0.06137 M

Answer:

d. 60.8 L

Explanation:

Step 1: Given data

Step 2: Calculate the work (W) done by the system

We will use the following expression.

ΔU = Q + W

W = ΔU - Q

W = -108.3 J - 53.1 J = -161.4 J

Step 3: Convert W to atm.L

We will use the conversion factor 1 atm.L = 101.325 J.

-161.4 J ×  1 atm.L/101.325 J = -1.593 atm.L

Step 4: Calculate the initial volume

First, we will use the following expression.

W = - P × ΔV

ΔV = - W / P

ΔV = - 1.593 atm.L / 0.677 atm = 2.35 L

The initial volume is:

V2 = V1 + ΔV

V1 = V2 - ΔV

V1 = 63.2 L - 2.35 L = 60.8 L

Answer:

The right answer is "105.17 ppb".

Explanation:

According to the question,

The amount of [tex]Pb^{2+}[/tex] in ppb will be:

= [tex]0.5076\times 10^{-6}\times 207.2\times 106[/tex]

= [tex]105.17 \ ppb[/tex]

Thus, the amount of [tex]Pb^{2+}[/tex] is above action limit.

Answer:

Hence the Volume of Gas = 3.04 L.

Explanation:  

pressure of dry gas = 765.3 - 24.3 = 741 mmhg  

Temperature of gas = 24.4+273.15 = 297.55 k  

No of mol of gas = 0.498/4 = 0.1245 mol  

R = gas constant = 0.0821 l.atm.k-1.mol-1  

From ideal-gas equation

PV = nRT  

(741/760) x v = 0.1245 x 0.0821 x 297.55  

V = Volume of Gas = 3.04 L

Answer:

66.67%

Explanation:

From the given information:

mass of cyclohexane = 2.9949 grams

density of cyclohexane = 0.779 g/mL

Recall that:

Density = mass/volume

∴

Volume = mass/density

So, the volume of cyclohexane = 2.9949 g/ 0.779 g/mL

= 3.8445 mL

Also,

mass of propylbenzene = 1.6575 grams

density of propylbenzene = 0.862 g/mL

Volume of propylbenzene =  1.6575 g/ 0.862 g/mL

= 1.9229 mL

The volume % composition of cyclohexane from the mixture is:

[tex]= (\dfrac{v_{cyclohexane}}{v_{cyclohexane}+v_{propylbenzene}})\times 100[/tex]

[tex]= (\dfrac{3.8445}{3.8445+1.9229})\times 100[/tex]

[tex]= (\dfrac{3.8445}{5.7674})\times 100[/tex]

= 66.67%

Answer:

0.0365 is your answer

Explanation:

Answer:

365.2gㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤ

Answer:

C-O: polar covalent

Mg-F: ionic

Cl-Cl: nonpolar covalent

Explanation:

Ionic bonds are formed between an atom of a metallic element and another atom of a non-metallic element. Thus, Mg-F is an ionic bond, in which Mg is the metal and F is the nonmetal.

Covalent bonds are formed between two non-metallic elements. So, C-O and Cl-Cl are covalent bonds, because C, O, and Cl are nonmetals.

In C-O, the atom of oxygen (O) has more electronegativity than the atom of carbon (C). Thus, O will attract the electrons with more strength and a difference in charge will be established between the two bonded atoms. So, this covalent bond is polar.

In Cl-Cl, both atoms have the same electronegativity because they are from the same chemical element (Cl). Thus, this bond is nonpolar.

Explanation:

Add water, Na2CO3 dissolves, filter, PbCO3 stays in the paper and dissolved Na2CO3 goes through as the solution. Dry the PbCO3 and you have the dry solid.

OR

Add water to dissolve then filter to obtain PbCo3 as you're residue and Na2Co3 as the filtrate. Dry the insoluble PbCo3 between filter papers and you obtain solid PbCo3

Answer:

Both substances undergo substitution reactions.

Explanation:

Let us go back to the idea of aromaticity. Aromatic substances are said to possess (4n + 2) π electrons according to Huckel rule.

Aromatic substances are unusually stable and the aromatic ring can not be destroyed by addition reactions.

Since both benzene and cyclooctatetraene are both aromatic, they do not undergo addition reactions whereby the aromatic ring is destroyed. They both undergo substitution reaction in which the aromatic ring is maintained.

Answer:

The phosphate will remain attached to the 5' carbon of the deoxy or the ribose sugar in the nucleic acid monomers.

Explanation:

The structure of nucleic acid polymers is built up from monomers of nucleotides.

A nucleotide consists of a sugar backbone which is either a ribose or deoxyribose sugar, a nitogenous base which is either a purine or pyrimidine, and a phosphate group. The nitrogenous base is attached to the carbon number 1 or C-1 of the sugar backbone by a covalent bond. The phosphate group on the other hand is covalently attached to the carbon number 5 or 5' carbon of the sugar backbone.

When polymers of nucleic acids are formed, the phosphate at the 5' carbon of the sugar backbone is covalently linked in a phosphodiester bond to the 3' carbon of the sugar backbone in another nucleotide molecule, thus extending the strands of the nucleic acid molecule.

Nucleases are enzymes that break down the phosphodiseter bonds in nucleic acids resulting in nucleotide monomers. After complete digestion ofmthe nucleic acid polymer by nucleases, the phosphate will remain attached to the 5' carbon of the deoxy or the ribose sugar in the nucleic acid monomers.

Answer:

The products will be favored at equilibrium.

Explanation:

The balanced chemical equation for the reaction is the following:

2 COF₂ (g) + ⇌ CO₂(g) + CF₄(g)

The reactant is COF₂ (left side) and the products are CO₂ and CF₄ (right side).

The equilibrium constant is given by the ratio between the partial pressures (P) of products and reactants, because they are in the gas phase. Thus, the expression of the equilibrium constant is the following:

[tex]Kp = \frac{P(CO_{2}) P(CF_{4}) }{P(COF_{2} )^{2} } = 2.2 x 10^{6}[/tex]

Since Kp>>>>1 ⇒ (P(CO₂) x P(CF₄)) > (P(COF₂))²

So, the partial pressures of the products (CO₂ and CF₄) are higher than the partial pressure of the reactant (COF₂).

Therefore, products will be favored at equilibrium at 298 K.

Answer:

362g

Explanation:

heat lost by metal= heat gained by acetic acid

tfs are the same so you cando delta T

convert Cal/gc to J/gc

thectgod ig follow

Answer:

C) 5

Step-by-step explaination:

Benzene has 5 resonance structures.

Answer:

water, when the metastable state is reached, is cooled below the zero temperature. It freezes abruptly. this is called metastable. They are not at equilibrium per se; as at negative temperatures the only equilibrium state of water is ice.

Explanation: