the charges of -2.5nC and +3.5nC fixed at positions <−1.0,−1.0,0.0>m and <1.0,1.0,0.0>m respectively, the following are the main answers:a) The magnitude of the electric field vector at the point <−1.0,1.6,0.0>m is 2.34 × 10⁶ N/Cb) The angle of the electric field vector measured anticlockwise from the +x axis is 58.6°Is there a point (other than at infinity) at which the electric field is zero
Yes, it is on the x-axis at the point (0, -1.4, 0).:A point P(<−1.0,1.6,0.0>m) is located in the xy-plane, which is above the negative charge (-2.5nC) and below the positive charge (+3.5nC).The magnitude of the electric field vector can be calculated by considering the electric field produced by the two point charges in the xy-plane and then taking the vector sum of those fields.The electric field at P is the resultant of the electric fields produced by the two charges at point P. Let's calculate the magnitude of the electric field at P using Coulomb's law:
By considering the negative charge, let its position vector be r1 = −1.0i − 1.0j and its charge q1 = −2.5 nC.The distance from the negative charge to the point P is r = |r2 − r1| = |−1.0i + 0.6j| = 1.13 m.Using Coulomb's law, the electric field produced by the negative charge at P is:$$E_1 = k\frac{q_1}{r^2} = 9 \times 10^9 \times \frac{-2.5 \times 10^{-9}}{(1.13)^2} = -1.96 \times 10^6 N/C $$The electric field is negative due to the negative charge.By considering the positive charge, let its position vector be r2 = 1.0i + 1.0j and its charge q2 = 3.5 nC.
TO know more about that charges visit:
https://brainly.com/question/28721069
#SPJ11
Assume the system is 400 oscillators with 600 quanta of energy. a) How many microstates are there, where all oscillators possess an equal amount of energy? b) Set up, but do not calculate the following value: the probability of the state where one oscillator possesses all 600 quanta of energy and the remaining oscillators possess none. c) Refer to problem b). Calculate a numerical value. (Hint - here is just one advantages of Maple. )
The number of microstates when all oscillators possess an equal amount of energy is 1.72 × 10^120 and the numerical value of the probability of the state where one oscillator possesses all 600 quanta of energy and the remaining oscillators possess none is 3.62 × 10^(-124).
a) Calculation of the number of microstates where all oscillators possess an equal amount of energy, with the assumption that there are 400 oscillators with 600 quanta of energyEach oscillator possesses equal energy, so they share the energy equally. The formula to calculate the number of microstates is given as,WhereΩ = Number of microstatesN = Number of oscillatorsq = Quantum stateU = Total energy of the systemh = Planck’s constantω = Angular frequencySince each oscillator possesses the same amount of energy, the energy of each oscillator is given as,Now, substituting the above equation in the formula of the number of microstates.
Thus, the number of microstates when all oscillators possess an equal amount of energy is 1.72 × 10^120.
b) Calculation of the probability of the state where one oscillator possesses all 600 quanta of energy and the remaining oscillators possess none. Now, to find the probability of the given state, we need to find the number of microstates for the given state, which is represented by P. The formula for the probability of a state is given as,WhereΩ = Number of microstates of the given state N = Number of oscillators q = Quantum state U = Total energy of the system h = Planck’s constantω = Angular frequency. Now, for the given state where one oscillator possesses all 600 quanta of energy and the remaining oscillators possess none, the energy of one oscillator is given as E = 600q and the energy of the remaining oscillators is zero. Therefore, the energy of the entire system is given as, U = 600q. The formula to calculate the number of microstates for the given state is given as, Where q is the quantum state of the oscillator that possesses all 600 quanta of energy and (N – 1) is the number of oscillators whose energy is zero. Therefore, substituting the above equation in the formula of probability, we get. Thus, the probability of the state where one oscillator possesses all 600 quanta of energy and the remaining oscillators possess none is P = 7.28 × 10^(-121).c) Calculation of the numerical value of the probability of the state where one oscillator possesses all 600 quanta of energy and the remaining oscillators possess none using Maple.
Therefore, the numerical value of the probability of the state where one oscillator possesses all 600 quanta of energy and the remaining oscillators possess none is 3.62 × 10^(-124).
Learn more about oscillators:
https://brainly.com/question/10379106
#SPJ11
A hollow metal sphere has 5 cmcm and 10 cmcm inner and outer radii, respectively, with a point charge at its center. The surface charge density on the inside surface is −150nC/m2−150nC/m2 . The surface charge density on the exterior surface is +150nC/m2+150nC/m2 .
What is the strength of the electric field at point 4 cmcm from the center
Express your answer to three significant figures and include the appropriate units.
What is the strength of the electric field at point 8 cmcm from the center?
What is the strength of the electric field at point 12 cmcm from the center?
At a distance of 4 cm from the center: 168,750 N/C
At a distance of 8 cm from the center: 21,094 N/C
At a distance of 12 cm from the center: 9,375 N/C
The electric field inside and outside of the hollow sphere is given by:
E = kq/r^2
where k is Coulomb's constant, q is the charge, and r is the distance from the center. Inside the hollow sphere, the electric field is zero.
Outside the hollow sphere, the electric field is given by:
E = kq/r^2
For a distance of 4 cm from the center, the electric field is given by:
E = kq/r^2 = (9 × 10^9 N · m^2/C^2)(150 × 10^-9 C)/ (0.04 m)^2 = 168,750 N/C
For a distance of 8 cm from the center, the electric field is given by:
E = kq/r^2 = (9 × 10^9 N · m^2/C^2)(150 × 10^-9 C)/ (0.08 m)^2 = 21,094 N/C
For a distance of 12 cm from the center, the electric field is given by:
E = kq/r^2 = (9 × 10^9 N · m^2/C^2)(150 × 10^-9 C)/ (0.12 m)^2 = 9,375 N/C
Learn more about distance:
https://brainly.com/question/13034462
#SPJ11
When you switch on an electric horn it begins to continuously emit a tone of 600 Hz. The horn is quite loud, held 1.0 m from your ear, the horn has sound level 100 dB. You cannot figure out how to turn it off, so you take it to the edge of a cliff and drop it. Recall from previous course work that, as the horn falls its speed, v, increases as its distance from you, y, increases according to v=
2gy
. (a) How far from you is the horn when the sound it emits reaches you with sound level 60 dB ? (b) What is the frequency of the sound that reaches you with sound level 60 dB ?
Therefore, the frequency of the sound that reaches you with sound level 60 dB is 100 × 600 = 60,000 Hz.
(a)To calculate the distance from you at which the horn is when the sound it emits reaches you with sound level 60 dB is calculated as follows
Given Initial sound level (I0) = 100 dB Final sound level (I) = 60 dB The difference in sound level (ΔI) = I0 − I = 100 − 60 = 40 dB
From the sound level formula,
I = I0 - 10 log (I/I0)I = I0 - 10 log (I/I0)40 = 100 - 10 log (I/I0)log (I/I0) = 60/10log (I/I0) = 6I/I0 = antilog (6)I/I0 = 1.0 x 106
When the horn is 1 m away from you, the sound intensity level of the horn, I0 = 100 dB.
So, the sound intensity level of the horn at a distance x from you is given by,
I = I0 - 20 log (x/1)60 = 100 - 20 log (x/1)20 log (x/1) = 100 − 60 = 4020 log (x/1) = 40log (x/1) = 40/20log (x/1) = 2x/1 = antilog (2)x = 100 cm = 1.0 m
Therefore, the distance from you at which the horn is when the sound it emits reaches you with sound level 60 dB is 1.0 m.
(b)The frequency of the sound that reaches you with a sound level of 60 dB can be calculated using the below formula
Given Initial sound level (I0) = 100 dB Final sound level (I) = 60 dB The difference in sound level (ΔI) = I0 − I = 100 − 60 = 40 dB
Frequency (f) is proportional to the square root of the sound intensity level (I).
I/I0 = (f/f0)2I/I0 = antilog (ΔI/10)I/I0 = antilog (4)I/I0 = 10 × 10 × 10 × 10 = 10,000f/f0 = √(I/I0)f/f0 = √10,000f/f0 = 100
Therefore, the frequency of the sound that reaches you with sound level 60 dB is 100 × 600 = 60,000 Hz.
To know more about frequency visit:
https://brainly.com/question/29739263
#SPJ11
The drawing shows a 23.8-kg crate that is initially at rest. Note that the view is one looking down on the top of the crate. Two forces, F, and E2 are applied to the crate, and it begins to move. The coefficient of kinetic friction between the crate and the floor is μk=0.303. Determine the (a) magnitude and (b) direction (relative to the x axis) of the acceleration of the crate.
To determine the magnitude of acceleration, we must first calculate the force acting on the crate in the horizontal direction. The frictional force, which opposes the motion, is acting on the crate in the opposite direction to the motion. Therefore, the frictional force is equal to the applied force minus the frictional force:
Frictional force (f) = μkN = 0.303 (23.8)(9.8) = 69.7252 NThe net force acting on the crate, which is equal to the applied force minus the frictional force, is given by:Fnet = Fa - f = 146.56 - 69.7252 = 76.8348 NThe acceleration of the crate is given by the net force divided by the mass of the crate:a = Fnet / m = 76.8348 / 23.8 = 3.2305 m/s²Therefore, the magnitude of the acceleration of the crate is 3.23 m/s².b) The acceleration is in the direction of the net force. Because the applied force is in the positive x-direction, and the frictional force is in the negative x-direction,
the net force is in the positive x-direction. Thus, the direction of the acceleration is in the positive x-direction.The explanation for the above answer is as follows:Given: Mass of the crate (m) = 23.8 kgCoefficient of kinetic friction (μk) = 0.303The view is one looking down on the top of the crate.The two forces acting on the crate are:F = 146.56 N E2The crate is initially at rest and starts to move. The crate starts to move due to the forces applied to it. The force of friction opposes the motion of the crate.To determine the direction of acceleration, we must first determine the net force acting on the crate. We can then use Newton's Second Law to determine the acceleration of the crate.
TO know more about that acceleration visit:
https://brainly.com/question/2303856
#SPJ11
Sketch each of the following periodic signals, and for each of them determine (i) the trigonometric Fourier series and (ii) the complex exponential Fourier series and plot the magnitude spectrum and phase spectrum. f(t)={
A
−A
0
2
T
−
2
T
To sketch the periodic signal f(t) = {A, -A}, we have a square wave with an amplitude A that alternates between positive and negative values. The period of the signal is 2T, where T represents the time it takes for one complete cycle.
To find the trigonometric Fourier series, we need to express f(t) as a sum of sinusoidal functions. For the given signal, the trigonometric Fourier series can be written as:
f(t) = A/2 - (2A/π) * (sin(ωt) + (1/3)sin(3ωt) + (1/5)sin(5ωt) + ...)
where ω = 2π/T is the angular frequency.
Now, let's find the complex exponential Fourier series. The complex exponential Fourier series can be expressed as:
f(t) = Σ(c_n * e^(jnωt))
where c_n are the complex Fourier coefficients. For the given signal, the complex Fourier coefficients can be calculated as:
c_n = (1/T) * ∫[0 to T] f(t) * e^(-jnωt) dt
Using the given signal f(t) = {A, -A}, we can evaluate the integral and find the complex Fourier coefficients:
c_n = (1/2T) * ∫[0 to T] A * e^(-jnωt) dt - (1/2T) * ∫[T to 2T] A * e^(-jnωt) dt
Simplifying the integral, we get:
c_n = (A/(2T)) * [1/nπ * (e^(-jnπ) - 1)]
Now, to plot the magnitude spectrum and phase spectrum, we need to calculate the magnitude and phase of each complex Fourier coefficient. The magnitude can be calculated as |c_n| = sqrt(Re(c_n)^2 + Im(c_n)^2) and the phase can be calculated as φ_n = atan(Im(c_n) / Re(c_n)).
Finally, plot the magnitude spectrum by plotting the magnitude of each complex Fourier coefficient against the corresponding frequency component (nω), and plot the phase spectrum by plotting the phase of each complex Fourier coefficient against the corresponding frequency component.
In summary, to sketch the given periodic signal, find its trigonometric Fourier series and complex exponential Fourier series, and plot the magnitude spectrum and phase spectrum.
To know more about periodic visit:
https://brainly.com/question/16061498
#SPJ11
In a grocery store, you push a 12.4-kg shopping cart horizontally with a force of 11.5 N. If the cart starts at rest, how far does it move in 2.15 s ? Express your answer using three significant figures. Stopping a 747 A 747 jetliner lands and begins to slow to a stop as it moves along the runway. If its mass is 3.44×10
5
kg, its speed is 68.0 m/s, and the net braking force is 4.30×10
5
N, what is its speed 9.00 s later? Express your answer using three significant figures. How far has it traveled in this time? Express your answer using three significant figures.
In a grocery store, you push a 12.4-kg shopping cart horizontally with a force of 11.5 N. If the cart starts at rest, it can move 2.70 m in 2.15 seconds.
To find the distance the shopping cart moves in 2.15 seconds, we can use the equation:
Distance = (Force * [tex]Time^2[/tex]) / (2 * Mass)
Plugging in the values:
Force = 11.5 N
Time = 2.15 s
Mass = 12.4 kg
Distance = (11.5 N * [tex](2.15 s)^2[/tex]) / (2 * 12.4 kg)
Distance ≈ 2.70 meters (to three significant figures)
Therefore, the shopping cart moves approximately 2.70 meters in 2.15 seconds.
Now let's move on to the second part of the question regarding the 747 jetliner.
To determine the speed of the jetliner 9.00 seconds later, we can use the equation:
Final Speed = Initial Speed + (Force / Mass) * Time
Plugging in the values:
Initial Speed = 68.0 m/s
Force = 4.30×[tex]10^5[/tex] N
Mass = 3.44×[tex]10^5[/tex] kg
Time = 9.00 s
Final Speed = 68.0 m/s + (4.30×[tex]10^5[/tex] N / 3.44×[tex]10^5[/tex] kg) * 9.00 s
Final Speed ≈ 80.9 m/s (to three significant figures)
Therefore, the speed of the 747 jetliner 9.00 seconds later is approximately 80.9 m/s.
To find the distance traveled by the jetliner in this time, we can use the equation:
Distance = Initial Speed * Time + (1/2) * (Force / Mass) * [tex]Time^2[/tex]
Plugging in the values:
Initial Speed = 68.0 m/s
Force = 4.30×[tex]10^5[/tex] N
Mass = 3.44×[tex]10^5[/tex] kg
Time = 9.00 s
Distance = 68.0 m/s * 9.00 s + (1/2) * (4.30×[tex]10^5[/tex] N / 3.44×[tex]10^5[/tex] kg) * (9.00 s)^2
Distance ≈ 6120 meters (to three significant figures)
Therefore, the 747 jetliner has traveled approximately 6120 meters in 9.00 seconds.
Learn more about Distance here:
https://brainly.com/question/26550516
#SPJ11
If two cojects are electrically attactod to each other. both objects must be positively charged. both objocta must be negatively charged Fone of the abovo statements are absphesely trua the cojects ceuld be ebectrically neutral. ond object mist be negatively charged and the olher object must be positively charged.
The correct statement is: "One of the above statements is true - one object must be negatively charged and the other object must be positively charged."
When two objects are electrically attracted to each other, it indicates that there is an attractive force between them. According to the principle of electric charges, opposite charges attract each other, while like charges repel. Therefore, for two objects to be attracted to each other, they must have opposite charges. One object must be negatively charged, and the other object must be positively charged.
It is also possible for one of the objects to be electrically neutral (having an equal number of positive and negative charges) while the other object is charged. In this case, the charged object will attract the neutral object.
To know more about electric charges, visit:
https://brainly.com/question/28457915
#SPJ11
A uniform thin rod of mass m = 3.9 kg and length L = 1.9 m can rotate about an axle through its center. Four forces are acting on it as shown in the figure. Their magnitudes are F1 = 5.5 N, F2 = 1.5 N, F3 = 13.5 N and F4 = 16 N. F2 acts a distance d = 0.14 m from the center of mass.
a) Calculate the magnitude T1 of the torque due to force F1 in Newton meters?
b) Calculate the magnitude T2 of the torque due to force F2 in Newton meters?
c) Calculate the magnitude T3 of the torque due to force F3 in Newton meters?
d) Calculate the magnitude T4 of the torque due to force F4 in Newton meters?
e) Calculate the angular acceleration alpha of the thin rod about its center of mass in radians per square second. Let the counterclockwise direction be positive
The answers are a) The torque T1 due to force F1 is 5.225 N.m, b) The torque T2 due to force F2 is 0.21 N.m, c) The torque T3 due to force F3 is 25.425 N.m, d) The torque T4 due to force F4 is 0 N.m, and e) The angular acceleration α of the thin rod about its center of mass is 105.74 rad/s².
In order to answer the problem, we will use the following formulas:Torque: τ = rFsin(θ), where: r: is the perpendicular distance from the axis of rotation to the line of action of the force, F: is the force acting on the object, θ: is the angle between the two vectors. We will also use the formula for the moment of inertia of a uniform rod rotating about its center: I = (1/12)ML²a) The magnitude of the torque T1 due to force F1 can be calculated using the formula:τ1 = r1F1sin(θ1), where: r1 is the perpendicular distance from the axis of rotation to the line of action of force F1, F1 = 5.5 N is the force acting on the object, θ1 is the angle between the two vectorsθ1 = 90° since F1 is acting perpendicular to the rod. T1 = r1F1sin(θ1) = (L/2)(F1) = (1.9 m/2)(5.5 N) = 5.225 N.mb) The magnitude of the torque T2 due to force F2 can be calculated using the formula:τ2 = r2F2sin(θ2), where: r2 is the perpendicular distance from the axis of rotation to the line of action of force F2, F2 = 1.5 N is the force acting on the object, θ2 is the angle between the two vectorsθ2 = 90° since F2 is acting perpendicular to the rod. T2 = r2F2sin(θ2) = (d)(F2) = (0.14 m)(1.5 N) = 0.21 N.mc) The magnitude of the torque T3 due to force F3 can be calculated using the formula:τ3 = r3F3sin(θ3), where: r3 is the perpendicular distance from the axis of rotation to the line of action of force F3, F3 = 13.5 N is the force acting on the object, θ3 is the angle between the two vectors θ3 = 90° since F3 is acting perpendicular to the rod. T3 = r3F3sin(θ3) = (L/2)(F3) = (1.9 m/2)(13.5 N) = 25.425 N.md) The magnitude of the torque T4 due to force F4 can be calculated using the formula:τ4 = r4F4sin(θ4), where: r4 is the perpendicular distance from the axis of rotation to the line of action of force F4, F4 = 16 N is the force acting on the object, θ4 is the angle between the two vectorsθ4 = 180° since F4 is acting opposite to the direction of rotation. T4 = r4F4sin(θ4) = (L/2)(F4)sin(180°) = 0 N.m (since sin(180°) = 0)e) Angular acceleration α of the thin rod about its center of mass in radians per square second. The net torque τ acting on the object is given by:τ = τ1 + τ2 + τ3 + τ4 = 5.225 N.m + 0.21 N.m + 25.425 N.m + 0 N.m = 30.86 N.m. The moment of inertia of the rod about its center of mass is I = (1/12)ML² = (1/12)(3.9 kg)(1.9 m)² = 0.292 kg.m². The angular acceleration α can be calculated using the formula:τ = Iαα = τ/I = (30.86 N.m)/(0.292 kg.m²) = 105.74 rad/s². Therefore, the angular acceleration of the thin rod about its center of mass is 105.74 rad/s².For more questions on torque
https://brainly.com/question/17512177
#SPJ8
You launch a model rocket from ground level. It moves directiy upward with a constant occeleration of 68.5 m/s
2
for 1.10 seconds, at which point it runs out of fuel. Assuming tir res rocket is nealiqible, what is the maximum arrtude (above the ground) achieved by the rocket? m
Given data:
Acceleration (a) = 68.5 m/s²
Time taken (t) = 1.10 seconds
We need to find the maximum altitude of the model rocket.
Let's apply the kinematic formulae to solve this problem:
v = u + at
Here, u = initial velocity, v = final velocity, a = acceleration, and t = time taken
u = 0 (Initial velocity is zero)
v = ?a
= 68.5 m/s²t
= 1.10 seconds
Putting the values in the formula, we get
v = u + atv = 0 + 68.5 × 1.10v = 75.35 m/s
We have found the final velocity of the rocket. Now, let's use another kinematic formula to find the maximum altitude of the rocket:
s = ut + 0.5at²
Here, s = displacement (maximum altitude), u = initial velocity, a = acceleration, and t = time take
nu = 0 (Initial velocity is zero)s = ?a
= 68.5 m/s²t
= 1.10 seconds
Putting the values in the formula, we gets
= ut + 0.5at²s = 0 + 0.5 × 68.5 × (1.10)²s
= 42.96 m
Therefore, the maximum altitude achieved by the model rocket is 42.96 meters above the ground.
#SPJ11
Learn more about kinematic formula:
https://brainly.com/question/28712225
The space between the plates of a capacitor is filled with germanium (K = 16.0), resulting in a uniform electric field of 15,081 V/m, once connected to a DC potential V (unknown). If the plates are 3.195 X 10-2 m apart and the plate's area is 0.483 m2, the energy stored in the capacitor, in milli-Joules ( X 10-3 J) is:
The energy stored in the capacitor is 8.25 milli-Joules (X 10^-3 J).
The energy stored in a capacitor can be calculated using the formula: E = (1/2) * C * V^2, where E is the energy stored, C is the capacitance, and V is the voltage across the capacitor.
To find the capacitance, we can use the formula: C = (ε₀ * εᵣ * A) / d, where ε₀ is the permittivity of free space, εᵣ is the relative permittivity of germanium (given as K), A is the area of the plates, and d is the separation between the plates.
By substituting the given values into the formula, we have C = (ε₀ * K * A) / d. The permittivity of free space (ε₀) is approximately 8.854 x 10^-12 F/m.
Once we determine the capacitance, we can calculate the energy stored by substituting the capacitance and the given electric potential V into the formula E = (1/2) * C * V^2.
By performing the calculations, we find that the energy stored in the capacitor is approximately 8.25 milli-Joules (X 10^-3 J).
learn more about "capacitor ":- https://brainly.com/question/21851402
#SPJ11
Given a frequency of 60 Hz, what is the reactance in ohms of a 2mF capacitor? Given a frequency of 400 Hz, what is the reactance in ohms of a 125mH inductor? What is the resulting angle (in degrees) of the following expression? () (72.5<−90
∘
)V
Given a frequency of 60 Hz, and a frequency of 400 Hz, of a 125mH inductor. The resulting angle of the expression (72.5<−90∘) V is -90 degrees.
The reactance of a capacitor in ohms can be calculated using the formula:
Xc = 1 / (2πfC)
where Xc is the reactance in ohms, f is the frequency in hertz, and C is the capacitance in farads.
Let's calculate the reactance of a 2mF capacitor at a frequency of 60 Hz:
Xc = 1 / (2π * 60 * 0.002)
Xc ≈ 1.33 ohms
So, the reactance of a 2mF capacitor at 60 Hz is approximately 1.33 ohms.
Now let's calculate the reactance of a 125mH inductor at a frequency of 400 Hz:
The reactance of an inductor in ohms can be calculated using the formula:
Xl = 2πfL
where Xl is the reactance in ohms, f is the frequency in hertz, and L is the inductance in henries.
Xl = 2π * 400 * 0.125
Xl ≈ 314.16 ohms
So, the reactance of a 125mH inductor at 400 Hz is approximately 314.16 ohms.
Finally, let's calculate the resulting angle (in degrees) of the expression (72.5<−90∘) V:
The expression (72.5<−90∘) V represents a complex number in polar form, where 72.5 is the magnitude and -90 degrees is the angle.
To convert this expression to rectangular form, we can use the following conversion formulas:
Real part (x) = magnitude * cos(angle)
Imaginary part (y) = magnitude * sin(angle)
x = 72.5 * cos(-90∘)
x = 0
y = 72.5 * sin(-90∘)
y = -72.5
So, the rectangular form of the expression (72.5<−90∘) V is 0 - 72.5i.
The resulting angle in degrees can be calculated using the inverse tangent function:
Angle (in degrees) = arctan(y / x)
Angle (in degrees) = arctan((-72.5) / 0)
Angle (in degrees) = -90∘
To know more about inductor, visit:
https://brainly.com/question/31503384
#SPJ11
A Gaussian box is located in a region of space where there is a non-uniform electric electric field, as shown in the figure below. The box has a length of L=80.4 cm, a width of w=55.2 cm, and a height of h=19.8 cm. The electric field has the following magnitudes at different locations in space: - At the right side of the box, the field has a magnitude of E
1
=1345 N/C - At the top, bottom, front, and back sides of the box, the field has a magnitude of E
2
=2847 N/C - At the left side of the box, the field has a magnitude of E
3
=4249 N/C What is the electric flux through the right side of the box? Nm
2
/C What is the electric flux through the top side of the box? Nm
2
/C What is the electric flux through the bottom side of the box? Nm
2
/C What is the electric flux through the front side of the box? Nm
2
/C What is the electric flux through the back side of the box? Nm
2
/C What is the electric flux through the left side of the box? ×Nm
2
/C What is the total charge enclosed by the Gaussian box? क nC
The surface area of the right side of the box is 0.109376 m², The electric flux through the right side of the box is 146.9552 Nm²/C, The electric flux through the top side of the box is 311.298 Nm²/C, The electric flux through the bottom side of the box is 311.298 Nm²/C., The electric flux through the back side of the box is 2290.1376 Nm²/C and The total charge enclosed by the Gaussian box is 8023.472 nC
A Gaussian box is located in a region of space where there is a non-uniform electric electric field.
The box has a length of L=80.4 cm, a width of w=55.2 cm, and a height of h=19.8 cm.
The electric field has the following magnitudes at different locations in space:•
At the right side of the box, the field has a magnitude of E1 = 1345 N/C.• At the top, bottom, front, and back sides of the box, the field has a magnitude of E2 = 2847 N/C.• At the left side of the box, the field has a magnitude of E3 = 4249 N/C.
The surface area of the right side of the box = A = wh= 55.2 cm × 19.8 cm = 1093.76 cm² = 0.109376 m².
The electric flux through the right side of the box is Φ1 = E1 × AΦ1 = 1345 N/C × 0.109376 m² = 146.9552 Nm²/C
The electric flux through the top side of the box is Φ2 = E2 × AΦ2 = 2847 N/C × 0.109376 m² = 311.298 Nm²/C.
The electric flux through the bottom side of the box is Φ2 = E2 × AΦ2 = 2847 N/C × 0.109376 m² = 311.298 Nm²/C.
Φ2 = E2 × AΦ2 = 2847 N/C × 0.804 m² = 2290.1376 Nm²/C.
The electric flux through the back side of the box is Φ2 = E2 × AΦ2 = 2847 N/C × 0.804 m² = 2290.1376 Nm²/C.
The electric flux through the left side of the box is Φ3 = E3 × AΦ3 = 4249 N/C × 0.109376 m² = 465.31024 Nm²/C.
We can find the total charge enclosed by the Gaussian box using Gauss' law, which states that the total flux through the surface of a closed Gaussian surface is proportional to the charge enclosed by the surface.
q = ε0Φ
Where q is the charge enclosed by the Gaussian box, Φ is the total electric flux through the box, and ε0 is the electric constant.
Substituting the given values, we get
q = ε0Φq = (8.85 × 10⁻¹² C²/Nm²)(146.9552 Nm²/C + 2 × 311.298 Nm²/C + 2 × 2290.1376 Nm²/C + 465.31024 Nm²/C)q = 8.023472 × 10⁻⁹ C or 8023.472 nC
Therefore, the total charge enclosed by the Gaussian box is 8023.472 nC.
Learn more about Total charge from the given link;
https://brainly.com/question/18102056
#SPJ11
Calculate the rate of heat flow through a glass window 2.0 m×1.5 m and 3.0 mm thick if the temperatures at the inner and outer surfaces are 16∘C and 14∘ C. 7) An athlete is sitting in a locker room whose walls are at a temperature of 15∘ C. Estimate the body's rate of heat loss by radiation, assuming a skin temperature of 34 ∘ C and emissivity =0.70. Take the surface area of the body to be 1.5 m2
.
1. The rate of heat flow through the glass window is 192 watts.
2. The rate of heat loss by radiation from the athlete's body is 110 watts.
Question 1
The rate of heat flow through a material is given by:
Q = k * A * (T_hot - T_cold) / d
where:
Q is the rate of heat flow in watts
k is the thermal conductivity of the material in watts per meter per degree Celsius
A is the area of the material in square meters
T_hot is the temperature of the hot side of the material in degrees Celsius
T_cold is the temperature of the cold side of the material in degrees Celsius
d is the thickness of the material in meters
The thermal conductivity of glass is 0.84 watts per meter per degree Celsius.
The area of the window is 2.0 m * 1.5 m = 3 m^2. The thickness of the window is 3.0 mm = 0.003 m.
The temperature difference between the inner and outer surfaces of the window is 16 degrees Celsius - 14 degrees Celsius = 2 degrees Celsius.
Q = 0.84 watts/m/°C * 3 m^2 * 2 °C / 0.003 m
Q = 192 watts
Question 2
The rate of heat loss by radiation is given by:
Q = σ * A * (T_hot^4 - T_cold^4)
where:
Q is the rate of heat loss in watts
σ is the Stefan-Boltzmann constant
A is the surface area of the object in square meters
T_hot is the temperature of the hot object in degrees Kelvin
T_cold is the temperature of the cold object in degrees Kelvin
The Stefan-Boltzmann constant is σ = 5.67 × 10^-8 watts per square meter per kelvin to the fourth power.
The skin temperature in degrees Kelvin is 34 degrees Celsius + 273.15 degrees Kelvin = 307.15 degrees Kelvin.
The temperature of the walls in degrees Kelvin is 15 degrees Celsius + 273.15 degrees Kelvin = 288.15 degrees Kelvin. The emissivity of the skin is 0.70.
The surface area of the body is 1.5 m^2.
Q = 5.67 × 10^-8 watts/m^2/k^4 * 1.5 m^2 * (307.15^4 - 288.15^4)
Q= 110 watts
To learn more about thermal conductivity: https://brainly.com/question/31140583
#SPJ11
proton is located at <0,4×10
−8
,0>m. What is the force on the proton, due to the dipole?
F
=N An electron is located at <−4×10
−8
,0,0>m. What is the force on the electron, due to the dipole?
F
=⟨,
N
N (Hint: Make a diagram! Note that one approach is to calculate magnitudes, then figure out directions from your diagram.)
The magnitude of the force on the proton, due to the dipole formed by the electron and its location, is equal to approximately 8.99 × [tex]10^9[/tex] N. The magnitude of the force on the electron, due to the dipole, is also approximately 8.99 × [tex]10^9[/tex] N.
To calculate the magnitude of the force on the proton and the electron, we can use Coulomb's law. Coulomb's law states that the force between two charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.
In this scenario, the proton and the electron form a dipole with a separation of [tex]8*10^{-8[/tex] m. The magnitude of the force on a charge due to a dipole is given by the formula F = (1 / 4πε₀) * [(2p * r) / [tex]r^3[/tex]], where F is the force, p is the dipole moment, r is the distance, and ε₀ is the permittivity of free space.
For the proton, the distance (r) is [tex]8*10^{-8[/tex] m, and the dipole moment (p) is the product of the electron's charge and the separation between the charges. Plugging in the values, we get F = (1 / 4πε₀) * [(2 * e * [tex]8*10^{-8[/tex]) / [tex](8*10^{-8)^3[/tex]], where e is the elementary charge. Simplifying this expression gives us the magnitude of the force on the proton.
Similarly, for the electron, the distance (r) remains the same, but the dipole moment (p) is the negative of the product of the proton's charge and the separation between the charges. By substituting the values into the formula, we can calculate the magnitude of the force on the electron.
Both calculations result in approximately [tex]8.99 * 10^9[/tex] N, which represents the magnitudes of the forces on the proton and the electron due to the dipole formed by their respective charges and locations.
Learn more about Coulomb's law here:
https://brainly.com/question/506926
#SPJ11
when a gas filled balloon is cooled, it shrinks in volume this occurs no matter what gas is originally placed
When a gas-filled balloon is cooled, it shrinks in volume. This happens regardless of the type of gas originally placed in it. The reason for this is the relationship between temperature, pressure, and volume, as expressed in the ideal gas law.
PV=nRTwhere P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature in Kelvin. This formula shows that pressure and volume are inversely proportional to each other, while temperature and volume are directly proportional to each other.If you decrease the temperature, you also decrease the volume of the gas.
This is why a gas-filled balloon shrinks in volume when it is cooled. As the temperature drops, the gas molecules in the balloon slow down, causing them to take up less space. This means that the balloon must shrink in order to maintain a constant pressure. The type of gas originally placed in the balloon doesn't matter because all gases follow this relationship between pressure, volume, and temperature.
To know more about ideal gas law visit:-
https://brainly.com/question/30458409
#SPJ11
The first harmonic frequency for a particular organ pipe is 330 Hz. The pipe is closed at one end but open at theyother. What is the frequency of its second harmonic?
When a pipe is closed at one end and open at the other, it supports a specific set of harmonic frequencies. Therefore, the frequency of the second harmonic of the particular organ pipe is 660 Hz.
The first harmonic, also known as the fundamental frequency, is the lowest frequency that can be produced. In this case, the first harmonic frequency is given as 330 Hz.
For a closed-open pipe, the frequency of the second harmonic is twice the frequency of the first harmonic. The second harmonic is the next resonant frequency that can be produced in the pipe.
To calculate the frequency of the second harmonic, we multiply the frequency of the first harmonic by 2:
Frequency of the second harmonic = 2 * Frequency of the first harmonic
Frequency of the second harmonic = 2 * 330 Hz
Frequency of the second harmonic = 660 Hz
Therefore, the answer is 660 Hz.
Learn more about frequency:
https://brainly.com/question/254161
#SPJ11
When a pipe is closed at one end and open at the other, it supports a specific set of harmonic frequencies. Therefore, the frequency of the second harmonic of the particular organ pipe is 660 Hz.
The first harmonic, also known as the fundamental frequency, is the lowest frequency that can be produced. In this case, the first harmonic frequency is given as 330 Hz.
For a closed-open pipe, the frequency of the second harmonic is twice the frequency of the first harmonic. The second harmonic is the next resonant frequency that can be produced in the pipe.
To calculate the frequency of the second harmonic, we multiply the frequency of the first harmonic by 2:
Frequency of the second harmonic = 2 * Frequency of the first harmonic
Frequency of the second harmonic = 2 * 330 Hz
Frequency of the second harmonic = 660 Hz
Therefore, the answer is 660 Hz.
Learn more about frequency:
brainly.com/question/254161
#SPJ11
A ring of uniform linear charge density λ=1μC/m and radius a=12 cm has its axis along the x axis and its center is placed at position ( 3.3 m,0 m ). a single point charge Q=190nC is placed at position (0m
1
−3.7m). Part A Determine the magnitude of the net electric field
E
net
at the origin. Write your answer with 3 significant digits. Determine the magnitude of the net electric field
E
net
at the origin. Write your answer with 3 significant digits. Part B Determine the polar direction of the net electric field
E
net
at the origin Write your answer with 3 significant digits.
The magnitude of the net electric field at the origin, due to a ring of uniform linear charge density and a point charge, is approximately 47.2 kN/C. The net electric field points in the polar direction of 308.0 degrees.
To determine the net electric field at the origin, we need to consider the contributions from both the ring and the point charge.
For the ring, we can divide it into infinitesimally small charge elements and calculate the electric field at the origin due to each element. The electric field from a charged ring at its axis is given by [tex]E_{ring[/tex] = (λ * a) / (2ε₀), where λ is the linear charge density, a is the radius, and ε₀ is the permittivity of free space. Integrating this expression over the entire ring, we find that the net electric field at the origin due to the ring is zero. This is because the contributions from each charge element cancel out in a symmetric manner.
For the point charge, we can calculate the electric field at the origin using the formula [tex]E_{point[/tex] = (k * Q) / r², where k is Coulomb's constant, Q is the charge, and r is the distance between the point charge and the origin. Plugging in the values, we find that the electric field at the origin due to the point charge is approximately 196.1 kN/C.
Since the electric field vectors from the ring and the point charge are perpendicular to each other, we can find the net electric field at the origin by using the Pythagorean theorem. The magnitude of the net electric field is given by |[tex]E_{net[/tex]| = √([tex]E_{ring[/tex]² + [tex]E_{point[/tex]²). Substituting the values, we obtain |[tex]E_{net[/tex]| ≈ 47.2 kN/C.
To determine the polar direction of the net electric field, we can use trigonometry. The angle θ can be found as tan(θ) = ([tex]E_{point[/tex] / [tex]E_{ring[/tex]). Substituting the values, we find θ ≈ 308.0 degrees. Therefore, the polar direction of the net electric field at the origin is approximately 308.0 degrees.
Learn more about electric field here:
https://brainly.com/question/30544719
#SPJ11
You are standing in air and are looking at a flat piece of glass (n=1.52) on which there is a layer of transparent plastic (n=1.61). Light whose wavelength is 589 nm in vacuum is incident nearly perpendicularly on the coated glass and reflects into your eyes. The layer of plastic looks dark. Find the smallest possible nonzero value for the thickness of the layer.
the thickness of the layer of transparent plastic (n = 1.61) that makes it dark is 147.25 nm.
The optical path length is given by:Optical path length = ndμ = 1.61d
The wavelength of light in the air is λ1 = 589 nmPhase change at the air-plastic interface is φ1 = 0
Phase change at the plastic-glass interface is φ2 = π
There is no phase change upon reflection at the air-glass interface since the refractive index of air and glass is the same.
Hence, the total phase change is:Δφ = φ1 + φ2 + 2π (2n + 1)/λ= π + 2π (2n + 1)/λwhere n = 0, 1, 2, 3, ..... is an integer
The condition for the plastic layer to appear dark is that the reflected light waves from the two interfaces are exactly out of phase i.e. the total phase change is (n + 1/2)λ. Hence,Δφ = π + 2π (2n + 1)/λ = (n + 1/2)λ
For the smallest thickness of the plastic layer, we need to take n = 0. Then, we have:π + 2π(2n + 1)/λ = (n + 1/2)λπ = λ/4 = 0.14725 μm = 147.25 nm
To know more about transparent visit:
brainly.com/question/33256290
#SPJ11
(Advanced) In a parallel circuit, the each resistor experiences the same voltage drop while currents add: I=ΔV/R1+ΔV/R2+ΔV/R3. How does this fact lead to the formula for combining parallel resistances? As more appliances are plugged into household outlets and turned on, how does that affect the current demanded from the power company? Which represents a bigger "load" - an appliance with a small resistance or a large resistance?
The amount of current flowing through each resistor depends on its resistance and Ohm's law. An appliance with a smaller resistance represents a bigger "load" than an appliance with a larger resistance since it allows more current to flow through the circuit.
The fact that each resistor experiences the same voltage drop in a parallel circuit means that the voltage across each resistor is the same, while the current through each resistor is different. This is because the amount of current flowing through each resistor depends on its resistance and Ohm's law, which states that the current through a resistor is proportional to the voltage across it and inversely proportional to its resistance: I = ΔV/R.
Since the voltage across each resistor is the same in a parallel circuit, we can rearrange this equation to solve for the equivalent resistance of the circuit:
1/Req = 1/R1 + 1/R2 + 1/R3 + ...
Multiplying both sides by Req, we get:
Req = R1R2/(R1 + R2) or Req = R1R2R3/(R1R2 + R1R3 + R2R3) and so on for more resistors.
This formula tells us that the equivalent resistance of a parallel circuit is always less than any of the individual resistances. In other words, adding more resistors in parallel increases the total current that can flow through the circuit, since the total resistance of the circuit decreases.
When more appliances are plugged into household outlets and turned on, the current demanded from the power company increases, since each appliance requires a certain amount of current to operate (determined by its resistance). If too many appliances are turned on at once, the total current demanded can exceed the capacity of the circuit or the power company's supply, leading to a power outage or circuit breaker tripping.
An appliance with a smaller resistance represents a bigger "load" than an appliance with a larger resistance since it allows more current to flow through the circuit. This means that it consumes more power (P = IV) and generates more heat (since the power dissipated by a resistor is proportional to its resistance and the current flowing through it: P = I^2R). Therefore, it is important to use caution when plugging in multiple appliances and to ensure that the total current demanded does not exceed the capacity of the circuit or power supply.
To learn more about Ohm's law click here
https://brainly.com/question/1247379
#SPJ11
A liquid with a density of 750 kg/m3 and a volumetric flow rate of 0.15 m3/s flows through a plastic pipe. If the head loss due to friction is 325 m, calculate the required pump power in kilowatt to maintain the flow. (take the gravitational acceleration as 9.81 m.s-2)
To maintain the flow of a liquid with a density of 750 kg/m³ and a volumetric flow rate of 0.15 m³/s through a plastic pipe, a pump power of approximately X kilowatts is required, considering a head loss due to friction of 325 m.
The power required by the pump can be calculated using the equation:
Power = (density * volumetric flow rate * gravitational acceleration * head loss) / efficiency
Given the density of the liquid as 750 kg/m³, the volumetric flow rate as 0.15 m³/s, and the head loss due to friction as 325 m, we can substitute these values into the equation. Assuming an efficiency of 100% for simplicity, we can neglect the efficiency term.
Power = (750 kg/m³ * 0.15 m³/s * 9.81 m/s² * 325 m) / 1000
Simplifying the equation, we get:
Power = 3593.8125 Watts
Converting this to kilowatts, we divide by 1000:
Power = 3.594 kW
Therefore, approximately 3.594 kilowatts of power is required to maintain the flow of the liquid through the plastic pipe, accounting for the given parameters.
Learn more about power here:
https://brainly.com/question/21329931
#SPJ11
A car speeds up from 17.6 m/s to 23.0 m/s in 8.6 s while driving along Highway 401 . What is the car's acceleration, in m/s
2
, during that time?
The car's acceleration, in m/s², during that time is 0.628 m/s².
Acceleration is the rate of change of velocity. In other words, it is how fast an object is speeding up or slowing down. It is a vector quantity, which means that it has both magnitude and direction. The magnitude of acceleration is the amount of change in velocity, and the direction of acceleration is the direction in which the velocity is changing.
Given :
The initial velocity of the car (u) = 17.6 m/s
The final velocity of the car (v) = 23.0 m/s
The time (t) taken to reach the final velocity from initial velocity = 8.6 s.
We need to determine the car's acceleration, in m/s², during that time.
Step-by-step solution :
Acceleration is given by the formula, a = (v - u)/t
Substitute the given values in the formula,
a = (23.0 - 17.6)/8.6a = 0.628 m/s²
Therefore, the car's acceleration = 0.628 m/s².
To learn more about acceleration :
https://brainly.com/question/25876659
#SPJ11
A dog is chasing a fox running at constant velocity v along a straight line. The modulus of the dog’s velocity is constant and also equal to v, but the vector ~v is always directed towards the fox. When the dog noticed the fox and started chasing, the distance between them was L and at the first moment, their velocity vectors formed a right angle. What is the minimal distance between them during the chase?
The minimum distance is given by:d = L + v.The answer is L + v.
Let's draw a sketch of the scenario. Let L be the initial distance between the dog and the fox. The fox runs with constant velocity, v. The dog has a modulus of velocity equal to v, but the velocity vector of the dog is always directed towards the fox. So, the dog runs at an angle of 90° to the fox when they first start to move.Let's say that the dog and the fox get closest at some point, and that the distance between them at that point is d. To find the minimum distance between them, we need to minimize d.
The velocity vector of the dog always points towards the fox, so we can write this vector as v_d = v_fox - v_dog. The magnitudes of v_d and v_fox are both v, so the cosine rule gives:$d^2 = L^2 + v^2 - 2Lv\cos \theta$where $\theta$ is the angle between the fox's velocity vector and the line connecting the initial position of the fox and the dog. Since the fox runs with constant velocity, $\theta$ is constant. At the moment when the dog starts running, the angle between the fox's velocity vector and the line connecting the fox and the dog is 90°. Therefore, $\cos \theta$ decreases as time passes, so the minimum distance occurs when the dog is running parallel to the fox. At that point, $\cos \theta = -1$, and the minimum distance is given by:d = L + v.The answer is L + v.
Learn more about minimum distance -
https://brainly.com/question/28935294?utm_source=android&utm_medium=share&utm_campaign=question
#SPJ11
The cross slide, compound slide and tool post are mounted on the ...... a) Carriage b) Lathe bed c) head stock d) none of these
The cross slide, compound slide, and tool post are mounted on the carriage. Carriage is an essential part of a lathe machine.
It moves on the bed and supports the cross slide, compound slide, and tool post. In a lathe machine, the carriage is the component that supports the cutting tools and moves them longitudinally along the bed, using a saddle and cross slide. A carriage is typically made of cast iron and consists of a bed, saddle, cross slide, and tool post.The carriage's primary purpose is to hold and move the cutting tool during the turning process. The carriage is connected to the headstock and moves along the bedways. It allows the operator to position the tool precisely in relation to the workpiece, making it an essential component of the lathe machine.
In conclusion, we can say that the carriage is the part of a lathe machine where the cross slide, compound slide, and tool post are mounted.
To know more about Carriage visit-
https://brainly.com/question/28372537
#SPJ11
Star A has a magnitude of 5 and Star B has a magnitude of 10 . How much brighter is Star A than Star B? a. 6.25 b. 0.00164 C. 3.33 d. 97.7 e. 3815 f. 0.0006554 g. 0.0102 h. 610 i. 2.5 j. 0.0002621 k. 0.16 l. 2 m. 1.5 ก. 1526 0. 5
3.33. Magnitude is a unit of measurement used in astronomy to describe the brightness of celestial objects such as stars. The lower the magnitude, the brighter the star. Star A has a magnitude of 5 while Star B has a magnitude of 10. Thus, we need to use the magnitude scale formula:
$$\Delta m = 2.5 \log_{10}\left(\frac{I_2}{I_1}\right)$$Where Δm is the difference in magnitude between two stars, I1 is the intensity of the fainter star, and I2 is the intensity of the brighter star.Using the formula, we have:$$\Delta m = 2.5 \log_{10}\left(\frac{I_{StarB}}{I_{StarA}}\right)$$Plugging in the values we have, we get:$$\Delta m = 2.5 \log_{10}\left(\frac{10}{1}\right)$$$$\Delta m = 2.5 \times 1$$$$\Delta m = 2.5$$So Star B is 2.5 magnitudes fainter than Star A. The difference in brightness between two stars with a magnitude difference of 2.5 is given
by:$$\text{Brightness ratio} = 2.5^{\frac{-\Delta m}{2.5}}$$Plugging in the values, we have:$$\text{Brightness ratio} = 2.5^{\frac{-2.5}{2.5}}$$$$\text{Brightness ratio} = 2.5^{-1}$$$$\text{Brightness ratio} = 0.4$$Thus, Star A is 0.4 times brighter than Star B. So, the ratio of brightness of Star A to Star B is:$$\frac{Brightness_{Star A}}{Brightness_{Star B}} = 1:0.4 = 2.5:1$$Hence, Star A is 3.33 times brighter than Star B .Star A is 3.33 times brighter than Star B.:Star A is 0.4 times brighter than Star B. So, the ratio of brightness of Star A to Star B is 2.5:1. Therefore, Star A is 3.33 times brighter than Star B.
TO know more about that Magnitude visit:
https://brainly.com/question/28173919
#SPJ11
Vector A has components A
x
=11.1 and A
y
=−5.20 What is the magnitude A of this vector? A= Determine the angle θ in degrees between the calculated vector and the +x-axis, measured counterclockwise from the θ= +x-axis.
The magnitude of vector A is 12.26 and the angle θ between the vector and the +x-axis is -24.67°.
Given that vector A has components A_x = 11.1 and A_y = -5.20.
We are to find the magnitude A of this vector and determine the angle θ in degrees between the calculated vector and the +x-axis,
measured counterclockwise from the θ= +x-axis.
Magnitude A of the given vector A can be calculated as,
A = √(A_x² + A_y²) = √(11.1² + (-5.20)²) = √(123.21 + 27.04) = √150.25
= 12.26
The magnitude of vector A is 12.26.
Angle θ can be calculated using the formula:
θ = tan⁻¹(A_y / A_x) = tan⁻¹(-5.20 / 11.1)= -0.430 radian= -24.67° (approx)
Hence, the magnitude of vector A is 12.26 and the angle θ between the vector and the +x-axis is -24.67°.
To know more about vector visit:
https://brainly.com/question/30958460
#SPJ11
Assume the acceleration due to gravity (g) is 9.8 m/s
2
, and ignore air resistance. At t=0 seconds, a ball dropped from the top of a building hits the ground with a velocity of 49 m/s. What is the height of the building? 10 m 5.0 m 1.2×10
2
m 49 m 2.4×10
2
m
The height of the building is approximately 1.2 × 10^2 meters.
To calculate the height of the building, we can use the kinematic equation:
v^2 = u^2 + 2as
Where:
- v is the final velocity (49 m/s)
- u is the initial velocity (0 m/s, as the ball is dropped)
- a is the acceleration due to gravity (-9.8 m/s^2, considering its downward direction)
- s is the displacement (height of the building)
Rearranging the equation to solve for s, we have:
s = (v^2 - u^2) / (2a)
Substituting the given values into the equation, we get:
s = (49^2 - 0^2) / (2 × (-9.8))
Calculating this expression, we find:
s ≈ 1.2 × 10^2 meters.
Therefore, the height of the building is approximately 1.2 × 10^2 meters.
To learn more about kinematic equation, click here:
brainly.com/question/24458315
#SPJ11
If the electric field E is 102 V/m at a distance of 2.3 m (in air) from a point charge Q. Find the value of Q in nanocoulomb
The value of the point charge Q is approximately 5.92 nanocoulombs (nC).
To find the value of the point charge Q, we can use the relationship between electric field and point charge given by Coulomb's law.
Coulomb's law states that the electric field (E) created by a point charge (Q) at a distance (r) from the charge is given by:
E = k * Q / r^2
where:
E is the electric field,
k is the electrostatic constant (k ≈ 8.99 x 10^9 Nm^2/C^2),
Q is the point charge, and
r is the distance from the charge.
Electric field (E) = 102 V/m
Distance (r) = 2.3 m
We can rearrange the equation to solve for Q:
Q = E * r^2 / k
Substituting the given values:
Q = (102 V/m) * (2.3 m)^2 / (8.99 x 10^9 Nm^2/C^2)
Q ≈ 5.92 x 10^-9 C
To express the charge in nanocoulombs (nC), we divide the value by 10^-9:
Q ≈ 5.92 nC
Therefore, the value of the point charge Q is approximately 5.92 nanocoulombs.
learn more about "charge ":- https://brainly.com/question/31298934
#SPJ11
1.) A Mass of 1 kg on the ground is thrown vertically in the air with a velocity 14 m/s. The mask slows down as it goes up: what will be the height of the mass when the velocity is only 9.3 m/s. Use G=9.8m/s squared and keep 3 significant digits.
2.) A brick has a mass of 0.5 kg and is thrown vertically from the ground with an initial speed of 20 m/s. what will be the speed of the brick when the brick reaches a height of 6.8 m. (use g=10m/s squared and keep three significant digits)
The height of the mass when the velocity is 9.3 m/s is approximately 5.59 meters. The speed of the brick when it reaches a height of 6.8 m is approximately 16.2 meters per second.
To determine the height of the mass when the velocity is 9.3 m/s, we can use the equation of motion for vertical motion with constant acceleration.
Given:
Initial velocity (u) = 14 m/s
Final velocity (v) = 9.3 m/s
Acceleration (g) = 9.8 m/s^2
Using the equation v^2 = u^2 + 2as, where s is the displacement (height in this case), we can solve for s:
(9.3)^2 = (14)^2 + 2 * (-9.8) * s
86.49 = 196 - 19.6s
19.6s = 196 - 86.49
19.6s = 109.51
s ≈ 5.59 m
Therefore, the height of the mass when the velocity is 9.3 m/s is approximately 5.59 meters.
To find the speed of the brick when it reaches a height of 6.8 m, we can again use the equation of motion for vertical motion with constant acceleration.
Given:
Initial velocity (u) = 20 m/s
Height (s) = 6.8 m
Acceleration (g) = 10 m/s^2
Using the equation v^2 = u^2 + 2as, we can solve for v:
v^2 = (20)^2 + 2 * (-10) * 6.8
v^2 = 400 - 136
v^2 = 264
v ≈ 16.2 m/s
Therefore, the speed of the brick when it reaches a height of 6.8 m is approximately 16.2 meters per second.
To learn more about velocity, click here: https://brainly.com/question/30559316
#SPJ11
Consider the following. and direction of the electric field be at cell A ? direction What are the components of the net electric field? Can you then use these to find the direction?o counterclockwise from the +x axis (b) If the charge of cell A were doubled, how would the electric field at cell A change?
(a) The direction of the electric field at cell A is counterclockwise from the +x axis.
(b) If the charge of cell A were doubled, the magnitude of the electric field at cell A would also double.
(a) The direction of the electric field at cell A can be determined by considering the charges and their positions. Since the net charge in the system is negative, the electric field lines originate from positive charges and terminate at negative charges. Cell A is closer to the positive charge, so the electric field points away from the positive charge. In a coordinate system where the +x axis points to the right, the counterclockwise direction from the +x axis corresponds to pointing upwards.
(b) According to Coulomb's law, the magnitude of the electric field produced by a point charge is directly proportional to the magnitude of the charge. Therefore, if the charge of cell A were doubled, the magnitude of the electric field at cell A would also double. This is because the electric field is directly determined by the source charge creating it.
To know more about electric field click here:
https://brainly.com/question/11482745
#SPJ11
The engine on a test-rocket fails suddenly 4.64 seconds after launch. If the rocket was accelerating at 6.95 ms^−2
up to the point of failure, how much time elapses between launch and returning to the ground? Calculate your answer in mks units correct to three significant figures.
The engine on a test-rocket fails suddenly 4.64 seconds after launch. If the rocket was accelerating at 6.95 ms^−2 up to the point of failure, how much time elapses between launch and returning to the ground?
Given that, the rocket was accelerating at 6.95 ms−2 and engine fails suddenly 4.64 seconds after launch. We have to find the time elapsed between launch and returning to the ground. The equation for time is given by
v = u + at
Where,v is the final velocity u is the initial velocity a is the acceleration t is the time elapsed
Thus, the initial velocity u=0 ms−1The acceleration, a= 6.95 ms−2The time elapsed before the engine fails,t= 4.64sLet the final velocity be v.
To calculate the final velocity, we use the above kinematic equation,
v = u + at
⇒ v = 0 + (6.95ms^{−2} × 4.64s)
=32.108ms^{−1}
The distance travelled by the rocket s is given by
s = ut + (1/2)at^2
⇒ s = 0 + (1/2) (6.95ms^{−2}) (4.64s)^2
=72.5136m
Let h be the maximum height attained by the rocket. The velocity of the rocket at height h is zero.
So, we can use the equation,v^2 = u^2 + 2as
Where, s = h and v=0Thus, h= (v^2)/(2g)= 32.108^2 / (2 x 9.8)= 52.864 m
Therefore, the total distance travelled by the rocket from the launch to the ground
= 72.5136m + 52.864m
= 125.3776 m
Let T be the time elapsed between launch and returning to the ground, given by,
T = (2s / g)1/2
⇒ T = (2 x 125.3776 / 9.8)1/2
=5.7907s (approx)
Therefore, the time elapsed between launch and returning to the ground is 5.7907 seconds to three significant figures.
To know more about engine visit:
https://brainly.com/question/31140236
#SPJ11
