Plz help if you can!
Name these Ionic Compounds: ( Al is Aluminum and Cl is chlorine)
1. AlI3
2. K3N
3. Cs2O
4. CaCl2
5. LiBr

Answer:

Chlorine (Cl)

Answer:

The correct answer is - Frequency is the number of wavelengths, which is measured in hertz.

Explanation:

Frequency is the number of waves that go through a fixed point at a particular time. Hertz is the SI unit for frequency which means that one hertz is equal to a unit number of waver passes in a unit time to a fixed point.

As the frequency of a wave increases which means the number of waves increases in the unit time, the shorter the wavelength will be.

a higher frequency wave has more energy than a lower frequency wave with the same amplitude.

the balanced chemical equation was shown here :

2 K3PO4 (aq) +  3 NiBr2(aq)      ------------>>   Ni3(PO4)2 (s) +  6 KBr (aq)

The balanced chemical equation when aqueous potassium phosphate reacts with aqueous nickel(II) bromide to produce solid nickel(II) phosphate and aqueous potassium bromide is:

2 K₃PO₄(aq) + 3 NiBr₂(aq) ⇒ Ni₃(PO₄)₂ + 6  KBr(aq)

Let's consider the unbalanced chemical equation that occurs when aqueous potassium phosphate reacts with aqueous nickel(II) bromide to produce solid nickel(II) phosphate and aqueous potassium bromide.

K₃PO₄(aq) + NiBr₂(aq) ⇒ Ni₃(PO₄)₂ + KBr(aq)

We will balance it using the trial and error method.

2 K₃PO₄(aq) + 3 NiBr₂(aq) ⇒ Ni₃(PO₄)₂ + KBr(aq)

We will get the balanced equation by multiplying KBr by 6.

2 K₃PO₄(aq) + 3 NiBr₂(aq) ⇒ Ni₃(PO₄)₂ + 6  KBr(aq)

The balanced chemical equation when aqueous potassium phosphate reacts with aqueous nickel(II) bromide to produce solid nickel(II) phosphate and aqueous potassium bromide is:

2 K₃PO₄(aq) + 3 NiBr₂(aq) ⇒ Ni₃(PO₄)₂ + 6  KBr(aq)

Learn more: https://brainly.com/question/7181548

Answer:

The answer is the 3rd line.

Explanation:

That's the atomic number

Answer:

1.66 M

Explanation:

Molarity = moles/L solution

We have the following data:

mass NaCl = m = 63 g

volume of solution = V = 0.65 L

Thus, we first convert the mass to moles with the molar mass of NaCl (MM):

MM(NaCl) = 23 g/mol Na + 35.4 g/mol Cl = 58.4 g/mol

moles NaCl = m/MM = 63 g/(58.4 g/mol)= 1.08 mol

Finally, we divide the moles into the volume of solution to calculate the molarity:

M = moles NaCl/V = 1.66 mol/L

A solute is a substance that is dissolved in another substance (option A).

A solute is any substance that is dissolved in a liquid solvent to create a solution.

This means that a solute + solvent = solution. For example; sugar (solute) is dissolved in water (solvent) to form a sugary solution.

Therefore, a solute is a substance that is dissolved in another substance.

Learn more about solute at: https://brainly.com/question/7932885

#SPJ1

A solute is any substance that is dissolved in another substance (Option A).

A solute is any type of substance whose molecules are able to form chemical bonds with molecules of solvent in a solution.

Solutes include, for example, hydrophilic substances that dissolve into water such as glucose, cellulose, aminoacids , etc.

In conclusion, a solute is a substance dissolved into another (Option A).

Learn more about solutes here:

https://brainly.com/question/25326161

#SPJ1

Answer:

A single bond, but it's also a hydrogen bond.

Explanation:

A hydrogen bond forms when hydrogen bonds to the 3 most electronegative atoms: Oxygen, Nitrogen, or Fluorine.

It's a single bond because hydrogen only has two valence electrons. Therefore, the rest of the electrons are placed around the nitrogen atom.

Answer:

No

Explanation:

Answer: smallest whole numbers are 2, 7, 4 and 6

Explanation: C2H6 + 3.5 O2. ⇒ 2. CO2 + 3 H2O

Answer:

Its when like two pure substances are like combined into one.

Explanation:

Answer:

they are both equal

Explanation:

if you don't know don't guess troll the teacher you will get it wrong anyway

Answer: b) Nitrogen trihydride should be the answer.

Explanation:

Nitrogen trihydride is the substance whose Lewis structure shows triple covalent bonds. Hence option is correct.

Covalent bonds are defined as the shared electron pair between two atoms that creates an interatomic bond. At room temperature, covalent compounds can be found in all three of their physical states and often have low boiling and melting temperatures. Covalent substances don't carry electricity.

Lewis structure are defined as a structural depiction of a molecule using lines or pairs of dots to represent covalent bonds between atoms and dots to show the locations of electrons surrounding the atoms. The goal of creating a Lewis dot structure is to locate lone electron pairs in molecules in order to better understand how chemical bonds are formed. In chemistry, a triple bond is a covalent connection where two atoms share three pairs of electrons, such as in the nitrogen molecule (N2) or the acetylene molecule (C2H2).

Thus, Nitrogen trihydride is the substance whose Lewis structure shows triple covalent bonds. Hence option is correct.

To learn more about Lewis structure, refer to the link below:

https://brainly.com/question/20300458

#SPJ6

Answer:

water cycle and carbon cycle

Answer:

Doubled.

Explanation:

The relationship between the temperature and the volume of a gas at a constant pressure can be described using Charles' law:

That means that the temperature and the volume of a gas are directly proportional: The higher the temperature, the higher the pressure. If one of those factors is increased twofold, the other one will be increased twofold as well.

Answer: cross-pollination

Explanation:

Answer:

C.164.1g/mol

Explanation:

40+14×2+16×6

164

The molar mass of Ca(NO3)2 is 164.1 g/mol.

Calcium nitrate, also called Norgessalpeter (Norwegian salpeter), is an inorganic compound with the formula Ca(NO3)2(H2O)x. The anhydrous compound, which is rarely encountered, absorbs moisture from the air to give the tetrahydrate. Both anhydrous and hydrated forms are colourless salts. Calcium nitrate is mainly used as a component in fertilizers, but it has other applications. Nitrocalcite is the name for a mineral which is a hydrated calcium nitrate that forms as an efflorescence where manure contacts concrete or limestone in a dry environment as in stables or caverns. A variety of related salts are known including calcium ammonium nitrate decahydrate and calcium potassium nitrate decahydrate.

Learn more about Calcium nitrate

https://brainly.com/question/3002815

#SPJ2

Answer:

gold i believe or possibly bromine

Explanation:

q- how does fluorine react with gold

a- this fluoride compound features gold in its highest known oxidation state. this red solid dissolves in hydrogen fluoride, but these solutions decompose, liberating fluorine.

q- how does chlorine react with gold

a- gold does react with halogens. it'll, for example, react very slowly with chlorine gas at room temperature to form gold chloride, AuCl3. if gold chloride is heated gently, it will decompose to release the pure elements again.

q- how does bromine react with gold

a- gold in bromine solutions dissolves according to electrochemical/chemical (EC) mechanisms. ... in the chemical composition of the mechanism, this monovalent gold bromide disproportionate into gold and stable AuBr −4 , which reports into solution. with respect to pH, there are two characteristic dissolution regions.

** sorry that i can't provide a sure answer**

good luck :)

i hope this helps

have a nice day!

Fluorine will be most reactive with gold.

What is fluorine?

Of almost all of the elements, fluorine seems to be the most electronegative as well as reactive. Fluorine would be a diatomic, pale yellow, extremely corrosive, combustible gas with a strong smell. The lightest halogen would that be. It produces oxygen and even the incredibly corrosive hydrofluoric acid when it combines strongly with water.

Reactivity would be a substance's capacity to chemically combine with several other substances. Iron, for instance, reacts vigorously with oxygen.

As you move down the group, the halogens, which are non-metal elements in Group 7, become less reactive. In contrast to the alkali metals within Group 1 of the particular periodic table, this trend is the opposite. One of the most reactive elements in Group 7 was fluorine.

To know more about fluorine.

https://brainly.com/question/1940697

#SPJ3

Answer:

B. Wind

Explanation:

Kinetic energy is moving

Answer:

Explanation:

To find the number of moles in a substance given it's number of entities we use the formula

[tex]n = \frac{N}{L} \\[/tex]

where n is the number of moles

N is the number of entities

L is the Avogadro's constant which is

6.02 × 10²³ entities

From the question we have

[tex]n = \frac{7.72 \times {10}^{24} }{6.02 \times {10}^{23} } \\ = 12.8 239[/tex]

We have the final answer as

Hope this helps you

Answer:

carbon is a nonmetal with 4 valence electrons

Explanation:

The element carbon is on the nonmetal section of the periodic table.

Answer:

About 60 grams.  

Explanation:

The on point answer is 61.28 grams.

Answer:

i'm thinking 27.6 not sure

Explanation:

Answer:

no sure

Explanation:

Answer:

The following is a rather lengthy discussion on chemical stoichiometry, but it will lead you through the mole concept and its application to chemical reaction stoichiometry. The problems are different than the one posted, but if you can follow this, then you can work your problem of interest.

Explanation:

Stoichiometry is very easy to master if you understand the ‘mole concept’ and how it is used to define and describe chemical process mathematically. A ‘mole’ – in chemistry – is the mass of substance containing one Avogadro’s Number of particles. That is, N₀ = 6.023 x 10²³ particles / mole. When working with chemical reactions and equations data should be first converted to moles using the following conversions.  

1 mole = 1 formula weight = 6.023 x 10²³ particles = 22.4 liters at STP(0⁰, 1atm).

In this problem you are given the equation 2Na + 2H₂O => 2NaOH + H₂. ‘Reading the equation’ there are 2 moles of Na, 2 moles of water, 2 moles of NaOH and 1 mole of H₂. In another example 3H₂ + N₂ => 2NH₃ there are 3 moles of H₂, 1 mole of N₂ and 2 moles of NH₃. The mole values can be multiples or fractions but if one mole value increases all the remaining mole values increase or decrease proportionally. For example:

Using the equation 2Na + 2H₂O => 2NaOH + H₂, one could multiply the equation by 2 giving 4Na + 4H₂O => 4NaOH + 2H₂. The equation shows balance but is not in standard form. If one multiplies the equation by ½ gives Na + H₂ => NaOH + ½H₂. Again, the equation shows balance but is not in standard form.

Standard form of equation also implies the equation conditions are at 0⁰C & 1atm pressure and 1 mole of any gas phase substance occupies 22.4 Liters volume. Such is the significance of converting given data to moles as all other substance mass (in moles) are proportional.  

1st problem, 1.76 x 10²⁴ formula units of Na will react with water (usually read as an excess) to produce (?) grams of H₂.

1st write the equation followed by listing the givens below the respective formulas… That is…

                         Na                      +            H₂O       =>    NaOH    +    H₂,

Given:      1.76 x 10²⁴ atoms                excess             ---------          ? grams

               = 1.76 x 10²⁴atoms/6.023 x 10²³atoms/mole

               = 2.922moles                                        produces  =>    2.922moles H₂ (b/c coefficients of Na & H₂ are same)

                                                      Convert moles to grams =>    2.922moles H₂  x  2.000 grams H₂/mole H₂

                                                                                                              = 5.8443 grams H₂

2nd problem, 3.5 moles Na will react with H₂O (in excess) to produce (?) moles of NaOH.

Again, write equation and assign values to each formula unit in the equation.

                         Na                      +            H₂O        =>           NaOH    +    H₂,

Given:            3.5moles                       excess                      ? grams       ----

Since coefficients of balanced std equation are equal …

                      3.5 moles Na                          produces =>     3.5 moles NaOH

                                             Convert moles to grams =>     3.5 moles NaOH x 40 g Na/mole Na

                                                                                                  = 140 grams NaOH

3rd problem, 2.75 x 10²⁵ molecules H₂O will react with (?) atoms of Na.

Same procedure, convert to moles, solve problem by ratios then convert to needed dimension at end of problem.

                         Na          +            H₂O                                   =>           NaOH           +    H₂

Given:           excess            2.75 x 10²⁵ molecules H₂O    =>      ? atoms NaOH       ----

Convert to moles =>          2.75 x 10²⁵ molecules H₂O / 6.023 x 10²³ molecules H₂O/mole H₂O  

                                             = 45.658 moles H₂O              =>  45.658 moles NaOH  (coefficients are equal)

Convert moles NaOH to grams NaOH                            =>   45.658 moles NaOH x  40 grams NaOH/mole NaOH

                                                                                                     = 1826.33 grams NaOH  

Master the mole concept and you master a lot of chemistry! Good luck.

Answer:

genetics i.e the law of heredity

Answer:Mendel proposed three laws: Law of Dominance. The Law of Segregation. Law of independent assortment.

Explanation:Gregor Johann Mendel was a scientist who is recognized as the Father and Founder of genetics. Mendel conducted many experiments on the pea plant (Pisum sativum) between 1856 and 1863. He studied the results of the experiments and deducted many observations. Thus, laws of inheritance or Mendel’s laws of inheritance came into existence. Before learning about Mendel’s laws of inheritance, it is important to understand what the experiments performed by Mendel were.

Answer:

the answer is d

Explanation:

hopes this helps

Answer:

Voltage.

Explanation:

Voltage is the force or pressure of electricity and is compared to the amount of water pressure in a hose.

Answer:

Voltage is the force or pressure of electricity and is compared to the amount of water pressure in a hose.