Please help with all 3 parts!

Answer:

IUPAC Name:

N-ethyl-N-methylaniline

Common Name:

Benzenamine

Question Completion with Options:

O coarse...few...rapid

O fine...few...slow

O fine...multiple...rapid

O coarse...few...slow

O fine...multiple...slow

Answer:

The choice that best completes the sentence is:

O coarse...few...slow

Explanation:

Transformations near the melting temperature develop coarse grains because few nucleation sites are formed and the rate of the grain growth is usually slow.  This is because of the process that starts with  recrystallization, recovery, and nucleation before growth can occur.  While recrystallization enables the grain to increase in size at high temperature, nucleation gives the grain the energy to irreversibly grow into larger-sized nucleus.

Answer:

an aqueous species is the answer

Una sustancia homogénea es una sustancia que se compone de una sola fase.

Recordemos que definimos una fase en química como "cantidad química y físicamente uniforme u homogénea de materia que se puede separar mecánicamente de una mezcla no homogénea y que puede consistir en una sola sustancia o una mezcla de sustancias" según Ecyclopedia Britiannica.

El hecho de que un sistema esté compuesto por una sola sustancia no lo hace es autóctono. A veces, un sistema puede estar compuesto por partículas sólidas de una sustancia en equilibrio con su líquido. El sistema contiene solo una sustancia pero en diferentes fases, por lo tanto, el sistema contiene una sustancia pero no es homogéneo.

Por tanto, el hecho de que un sistema contenga una sola sustancia no significa necesariamente que sea homogéneo.

https://brainly.com/question/9970247

Answer:

smallest mass necessary to

Explanation:

The critical mass for a fissionable material is the smallest and the lowest quantity of a particular fissile material required to generate a self-sustaining fission chain reaction under specified conditions. The size's features are determined by a number of variables. Examples include;

The type of fissile material employed, its purity as well as concentration, the shape of the surrounding reaction system e.t.c.

Answer:

Fill in the blanks with the terms that complete the sentences about nuclear power plants.

Without a critical mass of fissionable material, a nuclear reaction cannot be sustained. The turbine is powered by steam.

Explanation:

The answers to both parts are marked in bold. I just answered these questions on Edge and they were both correct. Hope this helps. Please mark my answers as the brainiest. THANK YOU!!!!!!!!!!!!!!!!!!!

Answer:

[tex]pH=4.77[/tex]

Explanation:

From the question we are told that:

pKa for Acetic Acid [tex]pK_a= 4.77[/tex]

Therefore

For Equal Concentration of acetic acid and acetatic ion

[tex]CH_3COOH=CH_3COO^-[/tex]

Generally the Henderson's equation for pH value is mathematically given by

[tex]pH=pK_a+log\frac{base}{acid}[/tex]

[tex]pH=4.77+log\frac{CH_3COO^-}{CH_3COOH}[/tex]

[tex]pH=4.77+log1[/tex]

[tex]pH=4.77[/tex]

Explanation:

P1V1/T1 = P2V2/T2

=((390.89×313.9)/76.6)×((718.3×V2)/154.2)

= (122700.371/76.7) × ((718.3×V2)/154.2)

make V2 the subject of the formula...

V2 =(122700.371×154.2)/(76.6×718.3)

V2 =18920397.21/55021.78

V2 = 343.87

Answer:

0.1 mol

Explanation:

6/(15*3+15)

0.1 mol moles of (CH3)3NH+ are in 6.0 g of (CH3)3NH+

The mole, symbol mol, exists as the SI base unit of the amount of substance. The quantity amount of substance exists as a measure of how many elementary entities of a provided substance exist in an object or sample.A mole corresponds to the mass of a substance that includes 6.023 x 1023 particles of the substance. The mole exists the SI unit for the amount of a substance. Its symbol stands mol.

The compound trimethylamine, (CH3 )3N, exists as a  weak base when dissolved in water.

A mole exist expressed as 6.02214076 × 1023 of some chemical unit, be it atoms, molecules, ions, or others. The mole exists as a convenient unit to utilize because of the great number of atoms, molecules, or others in any substance.

To find the amount of the substance (CH3)3NH+ to calculate its molar mass:

M((CH3)3NH+) = (12+3)*3 + 14+1 = 60 g/mol

n((CH3)3NH+) = m/M

m((CH3)3NH+) = 6g

Thus,

n((CH3)3NH+) = 6g/60 g/mol = 0.1 mol

Hence,

n((CH3)3NH+) = 0.1 mol

To learn more about mole refer to:

https://brainly.com/question/27952946

#SPJ2

Answer:

I hope this helps!

Explanation:

The biggest threat caused by GM foods is that they can have harmful effects on the human body. It is believed that consumption of these genetically engineered foods can cause the development of diseases which are immune to antibiotics. ... As the health effects are unknown, many people prefer to stay away from these foods.

Answer:

The hydrogen must be compressed to 1333.13302 kPa.

Explanation:

An ideal gas is characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T). The relationship between them constitutes the ideal gas law, an equation that relates the three variables if the amount of substance, number of moles n, remains constant and where R is the molar constant of the gases:

P * V = n * R * T

In this case:

Replacing:

P* 10.5 L= 5.75 moles* 0.082 [tex]\frac{atm*L}{mol*K}[/tex] * 293 K

Solving:

[tex]P=\frac{5.75 moles* 0.082 \frac{atm*L}{mol*K} * 293 K}{10.5 L}[/tex]

P= 13.157 atm

If 1 atm is equal to 101.325 kPa, then 13.157 atm is equal to 1333.13302 kPa.

The hydrogen must be compressed to 1333.13302 kPa.

Explanation:

here are your dissolutions

To calculate the atoms of an element in a given molecule, we need to multiply stoichiometry by the number that is written on the foot of that element. Therefore, the balanced equation are

CH[tex]_3[/tex]COOH + KOH [tex]\rightarrow[/tex]CH[tex]_3[/tex]COOK + H[tex]_2[/tex]O

H[tex]_2[/tex]CO[tex]_3[/tex] (aq) + 2 NaOH(aq) [tex]\rightarrow[/tex]Na[tex]_2[/tex]CO[tex]_3[/tex](aq) + 2 H[tex]_2[/tex]O

HNO[tex]_3[/tex] + Ba(OH)[tex]_2[/tex][tex]\rightarrow[/tex]Ba(NO[tex]_3[/tex])[tex]_2[/tex]+ H[tex]_2[/tex]O

Balanced equation is the one in which the total number of atoms of a species on reactant side is equal to the total number of atoms on product side. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, displacement reaction.

The other characteristic of balanced reaction is that physical state should be written with each compound or molecule on reactant and product side. Physical state should be written in brackets. s means solid, l means liquid, g means gas.

The balanced equation can be written as

CH[tex]_3[/tex]COOH + KOH [tex]\rightarrow[/tex]CH[tex]_3[/tex]COOK + H[tex]_2[/tex]O

H[tex]_2[/tex]CO[tex]_3[/tex] (aq) + 2 NaOH(aq) [tex]\rightarrow[/tex]Na[tex]_2[/tex]CO[tex]_3[/tex](aq) + 2 H[tex]_2[/tex]O

HNO[tex]_3[/tex] + Ba(OH)[tex]_2[/tex][tex]\rightarrow[/tex]Ba(NO[tex]_3[/tex])[tex]_2[/tex]+ H[tex]_2[/tex]O

Therefore, the balanced equation are

CH[tex]_3[/tex]COOH + KOH [tex]\rightarrow[/tex]CH[tex]_3[/tex]COOK + H[tex]_2[/tex]O

H[tex]_2[/tex]CO[tex]_3[/tex] (aq) + 2 NaOH(aq) [tex]\rightarrow[/tex]Na[tex]_2[/tex]CO[tex]_3[/tex](aq) + 2 H[tex]_2[/tex]O

HNO[tex]_3[/tex] + Ba(OH)[tex]_2[/tex][tex]\rightarrow[/tex]Ba(NO[tex]_3[/tex])[tex]_2[/tex]+ H[tex]_2[/tex]O

Learn more about the balanced equation, here:

https://brainly.com/question/7181548

#SPJ5

Answer:

it increases and is perpendicular to the motion of the wave.

Answer:

The atomic mass of this element would be 12 amu

Explanation:

The subatomic particles provide several bits of information about a given element.

The number of protons is equal to the atomic number of the element. For this element having 6 protons makes the atomic number 6 and makes the element Carbon.

The number of protons plus the number of neutrons equals the atomic mass of the element based upon atomic mass units (amus)

For this element 6 protons and 6 neutrons combine to make an atomic mass of 12 amus.

Lastly, the values of protons and electrons tell whether the atom is an ion or neutral. When protons equal electrons the atom is neutral. When protons are greater than neutrons the atom is a positive charge or cation. When the protons are less than the electrons the atom is a negative charge or anion. For this example the Carbon atom has 6 protons and 6 electrons making it neutral.

Answer:

NaCN- basic salt

KNO3 - neutral salt

NH4Cl - acid salt

NaHCO3 - acid salt

Na3PO4 - acid salt

Explanation:

Salt hydrolysis a process by which salts react with water giving an acid and a base.

When we dissolve NaCN in water, we have;

NaCN + - ⇄ Na^+ + CN^-

KNO3 ------> K^+ + NO3^-

NH4Cl ------> NH4^+ + Cl^-

NaHCO3 -----> Na^+ + HCO3^-

Na3PO4 ----> 3Na^+ + PO4^3-

Note that if a salt is formed from a weak acid and a strong base, the salt will be a basic salt e.g NaCN formed from weak HCN and strong NaOH.

If a salt is formed from a strong acid and weak base, the salt will be acidic, e.gNH4Cl formed from weak NH3 and strong HCl.

If a salt is formed from a strong acid and strong base, the salt will be neutral, e.g KNO3 formed from strong KOH and strong HNO3.

a].When sand is added to water it either hangs in the water or forms a layer at the bottom of the container. Sand therefore does not dissolve in water and is insoluble. It is easy to separate sand and water by filtering the mixture.

b]. The water filtered by kamal is not safe to drink .

If you run out of water, or cannot carry enough water with you for your entire trip, you may need to source drinking water from natural water sources.

The empirical formula is OsO₄ :

Explanation:

Osmium oxide contains osmium and oxygen only.

Thus, we shall determine the mass of oxygen in osmium oxide. This can be obtained as follow:

Mass of compound = 2.89 g

Mass of Os = 2.16 g

Mass of O = (Mass of compound) – (Mass of Os)

Mass of O = 2.89 – 2.16

Mass of O = 0.73 g

Finally, we shall determine the empirical formula of the compound. This can be obtained as follow:

Mass of Os = 2.16 g

Mass of O = 0.73 g

Os = 2.16 g

O = 0.73 g

Divide by their molar mass of

Os = 2.16 / 190 = 0.011

O = 0.73 / 16 = 0.046

Divide by the smallest

Os = 0.011 / 0.011 = 1

O = 0.046 / 0.011 = 4

Learn more: https://brainly.com/question/23629778

Answer:

0.2M H2C6H5O7 < 0.2M H2C2O4

Explanation:

A weak acid/base ionizes to a very small extent in water. Hence, if we say that a substance is a weak acid/base, its percentage of ionization in solution is very little.

More volume of a very weak acid is required to neutralize a strong base. Since NaOH is a strong base, the weaker acid among the duo will require more volume for neutralization.

Since H2C6H5O7 is a weaker acid than H2C2O4, equal concentration of the both acids will require less volume of H2C2O4 than H2C6H5O7 to neutralize 0.50 M NaOH.

H₂C₆H₅O₇ is a weaker acid than H₂C₂O₄, and will require the least volume of 0.50 M NaOH to be neutralized.

H₂C₆H₅O₇ < H₂C₂O₄

The strength of an acid is related to the value of its dissociation constant, Ka or its pKa (negative logarithm of Ka)

Strong acids have high Ka values or low pKa value, whereas weak acids have low Ka values and high pKa values.

Between two acids, the acid with a higher Ka or lower pKa values is the stronger acid.

Acids are classified as either strong or weak depending on how well it ionizes in solution to produce hydrogen ions.

Strong acids ionizes completely to produce hydrogen ions.

Weak acid ionizes partially to a varying degrees in water to produce hydrogen ions.

In neutralization reactions between acids and bases, stronger acids will require the most volume of base or alkali in order to be neutralized.

H₂C₂O₄ has a Ka value of 5.9 x 10⁻² and a pKa value of 1.23

H₂C₆H₅O₇ has a Ka value of 8.4 x 10⁻⁴ and a pKa value of 3.08

Hence H₂C₂O₄ is a stronger acid than H₂C₆H₅O₇

For equal molar concentrations of the two acids, H₂C₂O₄ will produce more hydrogen ions than H₂C₆H₅O₇, and thus, will require more volume base (0.50 M NaOH) to be neutralized.

learn more at: https://brainly.com/question/24229657

Answer:

(a) m = 0.327 m.

(b) m = 4.57 m.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to solve this problem by firstly considering the fact that the molality is computed by dividing the moles of solute by the kilograms of solvent, in this case water; in such a way, we proceed as follows:

(a) We firstly calculate the moles of 36.2 grams of sucrose as its molar mass is 342.3 g/mol:

[tex]\frac{36.2g}{342.3g/mol} =0.106mol[/tex]

Next, the kilograms of water in this case are 0.323 kg so that the molality will be:

[tex]m=\frac{0.106mol}{0.323kg}\\\\m=0.327m[/tex]

(b) In this case, we directly realize that the kilograms of water are now 1.889 kg so that the molality will be:

[tex]m=\frac{8.63mol}{1.889kg}=4.57m[/tex]

Clearly, the both of them in molal, m, units.

Regards!

Answer:

Vien, sometimes we make problems like this harder than they need to be. Suppose I asked you, “How many dozen wheels are on four dozen automobiles?” You would have no trouble answering 4 x 4 = 16 dozen.

A mole is just a quantity like a dozen. And in this case, instead of 4 wheels, each C2F6 molecule bears 6 fluorine atoms, right?

So 4 x 6 = 24 moles of fluorine atoms. You’ve got this, Vien!

Answer:

mountain

Explanation:

when plates move towards each other they create mountains

Answer:

89°c

Explanation:

i think this is the answer cause the temperature changed from 11 to 100 and so the atmospheric temperature would be the change in temperature

100-11=89°c

I hope this helps and sorry if it's wrong

the rate would decrease because the reactants are being depleted.

QUESTION:- Manganese-55 has _____neutrons.

OPTIONS :-

A. 55

B. 30

C. 25

ANSWER:- NUMBER OF NEUTRONS IS EQUAL TO THE DIFFERENCE BETWEEN THE MASS IF THE ATOM AND ATOMIC NUMBER

SO DIFFERENCE IS EQUAL TO :- 55-25 = 30 NEUTRONS.

SO THERE IS 30 NEUTRONS IN SINGLE ATOM OF THE MANGANESE-55 ATOM.

Answer:

the mass of an atom is the sum of proton and neutron which are both concentrated in nocleus of an atom. from the question the mass is given as 55 and the proton is 25.

[tex]\\ \large\sf\longmapsto H_2SO_4[/tex]

[tex]\\ \large\sf\longmapsto 2(1u)+32u+4(16u)[/tex]

[tex]\\ \large\sf\longmapsto 2u+32u+64u[/tex]

[tex]\\ \large\sf\longmapsto 98u[/tex]

[tex]\\ \large\sf\longmapsto 98g/mol[/tex]

[tex]\boxed{\sf No\:of\:moles=\dfrac{Given\:mass}{Molar\:Mass}}[/tex]

[tex]\\ \large\sf\longmapsto No\:of\:moles=\dfrac{245}{98}[/tex]

[tex]\\ \large\sf\longmapsto No\:of\:moles=2.5mol[/tex]

Now

[tex]\boxed{\sf Molarity=\dfrac{Moles\:of\:solute}{Volume\:of\:solution\;in\;L}}[/tex]

[tex]\\ \large\sf\longmapsto Molarity=\dfrac{2.5}{1}[/tex]

[tex]\\ \large\sf\longmapsto Molarity=2.5M[/tex]

Answer:

-800 kJ/mol

Explanation:

To solve the problem, we have to express the enthalpy of combustion (ΔHc) in kJ per mole (kJ/mol).

First, we have to calculate the moles of methane (CH₄) there are in 2.50 g of substance. For this, we divide the mass into the molecular weight Mw) of CH₄:

Mw(CH₄) = 12 g/mol C + (1 g/mol H x 4) = 16 g/mol

moles CH₄ = mass CH₄/Mw(CH₄)= 2.50 g/(16 g/mol) = 0.15625 mol CH₄

Now, we divide the heat released into the moles of CH₄ to obtain the enthalpy per mole of CH₄:

ΔHc = heat/mol CH₄ = 125 kJ/(0.15625 mol) = 800 kJ/mol

Therefore, the enthalpy of combustion of methane is -800 kJ/mol (the minus sign indicated that the heat is released).

Answer:

C

Explanation:

Answer:

Once you have collected 40 mL of distillate, you should ________.

turn off the hot plate and carefully lower the lab jack, making sure that no cords or hoses get caught in it.

Explanation:

Distillate is the product obtained from the process of distillation.  Distillation is the separation of components of a liquid mixture based on different boiling points. Distillation can be used to purify alcohol, for desalination, refining of crude oil, and for obtaining liquefied gases.  A lab jack is an essential tool that supports and lifts hotplates, glassware, baths, and other small lab equipment requiring stable surfaces at a specific height.

Answer:

5.20 grams of Br₂

Explanation:

From our previous knowledge;

We understand that:

The number of moles of a given element = mass of the element divided by its molar mass.

Mathematically:

[tex]\mathbf{no \ of \ moles =\dfrac{ mass}{ molar \ mass}}[/tex]

From the given information, let's assume that the 0.065 moles of liquid -bromine partake in the reaction.

From the periodic table, the molar mass of Bromine is = 79.9 g/mol

As such, the mass of liquid that partakes is calculated as:

0.065 mol  = mass/ 79.9 g/mol

mass = 0.065 mol × 79.9 g/mol

mass of liquid that partakes in the reaction = 5.20 grams of Br₂

Answer:

attached below

Explanation:

The Four Claisen condensation are grouped into :

Self Claisen condensation is when R = R'

Cross Claisen condensation is when R ≠ R'

attached below are the four Claisen condensation