One possible unit of speed is ​

Explanation:

The kilogram (kg) is defined by taking the fixed numerical value of the Planck constant h to be 6.62607015 ×10−34 when expressed in the unit J s, which is equal to kg m2 s−1, where the meter and the second are defined in terms of c and ∆νCs.

Answer:

answer E

Explanation:

cuz its 45 is divisible by 3 and 5 but not 10

This is because of continuous usage, the wire loses its elasticity and dose not regain it original dimension

Answer:

When a spring balance has been used for a long time, the spring in the balance fatigued and there is loss of strength of the spring. In such a case, the extension in the spring is more for a given load and hence the balance gives wrong readings.

The final potential energy of the electron is zero Volt, (0 V)

Given;

The driving force of an electron in the circuit is the electromotive force of the cell (emf).

The initial energy acquired by the electron decreases gradually as the electron moves across the circuit and eventually it will be used up. This is the sole reason battery discharges when the circuit is closed or delivering current.

Thus, the final potential energy of the electron at the end of the circuit is zero (0), because all the initial energy will be used up to drive the across the circuit.

learn more here: https://brainly.com/question/14427507

Answer:

16.50 m/s²

Explanation:

initial velocity(u)=45.2 m/s

final velocity(v)= 0 (it stops)

time taken(t)= 2.74 s

now,we have

acceleration(a)= (v-u)/t

= (0-45.2 m/s)/2.74s

= -45.2 m/s / 2.74s

= -16.50 m/s²

Answer:

[tex]\boxed {\boxed {\sf -16.5 \ m/s^2}}[/tex]

Explanation:

We are asked to find the acceleration of a man driving. Acceleration is the change in velocity over the change in time. Acceleration is calculated with the following formula.

[tex]a= \frac{v_f- v_i}{t}[/tex]

The driver's initial velocity is 45.2 meters per second. His final velocity is 0 meters per second because he came to a stop. He stopped in 2.74 seconds.

[tex]\bullet \ v_f= 0 \ m/s \\\bullet \ v_i= 45.2 \ m/s \\\bullet \ t= 2.74 \ s[/tex]

Substitute these values into the formula.

[tex]a= \frac{0 \ m/s - 45.2 \ m/s }{ 2.74 \ s}[/tex]

Solve the numerator by subtracting.

[tex]a= \frac{- 45.2 \ m/s }{ 2.74 \ s}[/tex]

[tex]a= -16.49635036 \ m/s^2[/tex]

The original measurements of velocity and time have 3 significant figures, so our answer must have the same. For the number we calculated, that is the tenths place. The 9 in the hundredth place tells us to round the 4 in the tenths place up to a 5.

[tex]a \approx -16.5 \ m/s^2[/tex]

The acceleration is approximately -16.5 meters per second squared. The acceleration is negative because the man slowed down and came to a stop.

hi true false true false

Answer:

A = 100m

B = 120m

C = 170m

D = 160m

E = 190m

F = 145m

G = 130m

H = 170m

I = 100m

J = 95m

K = 100m

Explanation:

A = 100m

B = 120m

C = 170m

D = 160m

E = 190m

F = 145m

G = 130m

H = 170m

I = 100m

J = 95m

K = 100m

The contour intervals are 10m apart, anything exactly between 2 contour lines is 5m, and the cut lines are depressions so insisted of going up they go down.

Answer:

c is the answer

hope it helped :)

Answer: C or B

Explanation: They both relate to the same thing

Answer:

THIS IS YOUR ANSWER:

Science is a study of nature human beings plants animals chemicals and machines.

and pHySiCs is a part of science

✍️HOPE IT HELPS YOU ✍️

Explanation:

In scalar addition we have to do only the sum of magnitude as we know that the scalar quantities don't have direction.

since it is the scalar quantity the direction will be same for all the magnitudes.

Answer:

In scalar addition we have to do only the sum of magnitude as we know that the scalar quantities don't have direction...

since it is the scalar quantity the direction will be same for all the magnitudes.

on the other hand if it was a vector addition then it should be with two different directions which are considerable show the resultant vector needs to be calculated by vector addition method.

Answer:

Kinetic Generating Plants

Hydro-electric plants and wind-mills also convert energy into electricity. Instead of heat energy, they use kinetic energy, or the energy of motion. Moving wind or water (sometimes referred to as "white coal") spins a turbine, which in turn spins the rotor of a generator?

Ignoring air resistance . . .

After the bomb is released, tangential (horizontal) acceleration is zero,, normal (vertical) acceleration is 9.8 m/s^2 down (gravity).

Answer:

the scientific study of measurement.

Answer:

a system is a set of some things which helps the good happenings in ousr day to day life. It also helps the astrophysisists to find the planets with a system

Answer:

0 Newtons

Explanation:

The velocity of the object does not change, it is a constant 54 km/hr. When velocity does not change, acceleration is zero. Using the formula Force = mass x acceleration, we find:

mass = 1200 kg

acceleration = 0

F  = (1200)(0) = 0

Answer:

acceleration = v-u/ t

= 15-10/5

= 5/5

= 1 m/s2

Explanation:

hope this helped you.

Answer:

[tex]\boxed {\boxed {\sf 1 \ m/s^2}}[/tex]

Explanation:

Acceleration is the change in velocity over the change in time. Therefore, the formula for calculating acceleration is:

[tex]a= \frac{v_f-v_i}{t}[/tex]

Since the body's velocity increased from 10 meters per second to 15 meters per second 15 m/s is the final velocity and 10 m/s is the initial velocity. The time is 5 seconds.

[tex]a= \frac{ 15 \ m/s - 10 \ m/s}{5 \ s}[/tex]

Solve the numerator.

[tex]a= \frac{ 5 \ m/s }{5 \ s}[/tex]

Divide.

[tex]a= 1 \ m/s/s[/tex]

[tex]a= 1 m/s^2[/tex]

The acceleration is 1 meter per second squared.

Answer:

Helo ....

so this answer would be First class levers

becoz...

First-class levers have a considerable practical advantage over the other types of levers. They convert a downward moving force into a lifting force

is it possible to mark it brainliest <3

Tomando en cuenta la Ley de Charles y la condiciones dentro del recipiente, tenemos las siguientes conclusiones con respecto al volumen del recipiente:

1) El volumen inicial del gas es 144.203 mililitros.

2) El volumen final del gas es 386.986 mililitros.

La Ley de Charles establece que el Volumen de un gas es directamente proporcional a su Temperatura, basados en este hecho, podemos resolver los problemas en cuestión mediante la siguiente relación matematica:

[tex]\frac{V_{1}}{T_{1}} = \frac{V_{2}}{T_{2}}[/tex] (1)

Donde:

[tex]V_{1}[/tex] - Volumen inicial, en mililitros.

[tex]V_{2}[/tex] -  Volumen final, en mililitros.

[tex]T_{1}[/tex] - Temperatura inicial, en Kelvin.

[tex]T_{2}[/tex] - Temperatura final, en Kelvin.

1) Si sabemos que [tex]V_{2} = 150\,mL[/tex], [tex]T_{2} = 388.15\,K[/tex] and [tex]T_{1} = 373.15\,K[/tex], entonces el volumen inicial del gas es:

[tex]V_{1} = \frac{T_{1}}{T_{2}}\times V_{2}[/tex]

[tex]V_{1} = \frac{373.15\,K}{388.15\,K}\times 150\,mL[/tex]

[tex]V_{1} = 144.203\,mL[/tex]

El volumen inicial del gas es 144.203 mililitros.

2) Si sabemos que [tex]T_{1} = 473.15\,K[/tex], [tex]V_{1} = 350\,mL[/tex] and [tex]T_{2} = 523.15\,K[/tex], entonces el volumen final del gas es:

[tex]V_{2} = \frac{T_{2}}{T_{1}}\times V_{1}[/tex]

[tex]V_{2} = \frac{523.15\,K}{473.15\,K}\cdot 350\,mL[/tex]

[tex]V_{2} = 386.986\,mL[/tex]

El volumen final del gas es 386.986 mililitros.

He aquí una pregunta relacionada con la Ley de Charles: https://brainly.com/question/21184611

Answer:

similar type of electric charges attract one another

I think this is a coorect staement

Answer:

C ) An electroscope is used to determine the presence of electrostatic charges

Answer:

if buoyant force is equal is equal to the weight of body then our body float. if density of our body is less than density of liqiud then our body float in water.

Using 1st equation of kinematics

[tex]\\ \bull\sf\longmapsto v=u+at[/tex]

[tex]\\ \bull\sf\longmapsto v=0+0.25(180)[/tex]

[tex]\\ \bull\sf\longmapsto v=45m/s[/tex]

⇛Initial velocity (u) = 0 m/s

⇛Acceleration (a) = 0.25 m/s²

⇛Time (t) = 3 minutes

⇛Final velocity (v) = v

Converting 3 minutes into seconds

[tex] \Large\begin{gathered} {\underline{\boxed{ \rm {\red{v \: = \: u \: + \: at}}}}}\end{gathered}[/tex]

[tex] \bf \large \longrightarrow \: \: v \: = \: 0 \: + \: 0.25 \: \: (180)[/tex]

[tex]\bf \large \longrightarrow \: \: v \: = \:45 \: m/s[/tex]

the first one answer is speed and the second one is direction.

Answer:

1. Slope of distance time graph gives Speed in the case of uniform motion

2.The magnitude of velocity and Displacement will be equal if motion is along a straight path

Explanation:

PLEASE MARK BRAINLEST

Answer:

Answer:

Answer:

For vegetarians beans

Explanation:

Because it's plant protein and very proteinious

Answer:

im pretty sure that it's (A.) High current

Explanation:

pf

not 100% sure, tho

Answer:

dude just use the calculator fr

please mark this answer as brainlist

Answer:

60×60×24=86,400

Explanation:

i.e. 86,400 secs is 1 day

1 hour = 60 minutes

1 minute = 60 seconds

1 day = 24 hours

60 min. × 60 sec. × 24 hr.

60 × 60 × 24 = 86,400 seconds

∴ 86,400 seconds = 1 day