Answer:
lower
Explanation:
because gravity pulls us down
en que consiste el atletismo de pista y campo?
Answer:
El atletismo es un deporte que incluye competencias atléticas basadas en las habilidades para correr, saltar y lanzar. El nombre se deriva del lugar donde se lleva a cabo el deporte, una pista de atletismo y un campo de hierba para los lanzamientos y algunos de los eventos de salto.
Explanation:
Yo se esto
Two workers use 100 N of force to move a sofa 2 meters in 2 seconds. How
much power is required?
A. 200 W
B. 100 W
C. 4 W
D. 400W
Answer:
B.) 100 W
Explanation:
Power = work/time = (Force * Distance)/Time
Force = 100 N
Distance = 2M
Time = 2 sec
Power = (100 * 2)/2 = 100 Watts
Thus the answer is B.) 100 W
i have to match the words to its definition i have 15 minutes plz
can anyone heelp me plz plz
Answer:
the ans is D.... good luck
A 3.6-kg goose floats on a lake with 46 % of its body below the 1000-kg/m3 water level. Determine the average density of the goose.
The average density of the goose on the given lake is 460 kg/m³.
The given parameters;
mass of the goose, m = 3.6 kgfraction of the goose below the lake, = 46%density of the water, ρ = 1000 kg/m³The specific gravity of the goose is calculated as follows;
[tex]S.G = \frac{46}{100} = 0.46[/tex]
The density of the goose is calculated as follows;
[tex]S.G = \frac{\rho _{g}}{\rho_{w}} \\\\\rho_{g} = S.G \times \rho_{w}[/tex]
where;
[tex]\rho _{w}[/tex] is the density of water[tex]\rho _{g}[/tex] is the density of the gooseThe density of the goose is calculated as;
[tex]\rho _{g}= 0.46 \times 1000 \ kg/m^3\\\\\rho _{g}= 460 \ kg/m^3[/tex]
Thus, the average density of the goose on the given lake is 460 kg/m³.
Learn more here:https://brainly.com/question/14587469
how do organisms interact with the living and the non-living environment to obtain matter and energy?
Answer:
Seeking matter and energy resources to sustain life, organisms in an ecosystem interact with one another in complex feeding hierarchies of producers, consumers, and decomposers, which together represent a food web.
How does the drop height (gravitational potential energy) of a
ball affect the bounce height (kinetic energy) of the ball?
The
A man moves a box horizontally by exerting on it a force of 90 N directed at 60 above the horizontal. If the work done on the box is 450 J, the displacement of the box is
Hi there!
We know that:
W = F · dcosФ
The cosine indicates that work only takes into account the component of the force that is parallel to the displacement.
Thus, we must find the horizontal component of the force:
FcosФ = horizontal component
90cos(60) = 45 N
Now, we can solve for displacement:
W = Fd
W/F = d
450/45 = d = 10 m
A photograph of you and your friends at your 8th birthday party.is it secondary or primary source and why?
Answer:
primary source
Explanation:
the explanation is in the image above
brainliest please
Compare and contrast the different parts of the Electromagnetic Spectrum. Evaluate the usefulness of each part and decide which part is most useful, or most important, to you and society as a whole. You must provide two reliable sources to back up your opinion. Recall that reliable sources include scientific sites or publications, education sites or publications, and government sites or publications.
Answer:
Think in your Mind
Explanation:
if you do you will have a better understanding of what you're doing
you could study you could ask a parent or guardian
or maybe stop looking up answer and expect other people breaking thier heads doing this
NO LINKS Select the choice that shows the helping verb followed by the main verb. I am writing this sentence. I am writing this sentence. I am writing this sentence. I am writing this sentence
The helping verb in the sentence; "I am writing this sentence" is the verb "am".
Helping verbs are verbs that occur in sentences or clauses whose function is to express tense, form negations or form a question. Examples of helping verbs include; Am, is, are, was and were, being, been, and be, Have, has, had, do, does, did, will, would, shall and should, may, might, must, can, could.
In this sentence; "I am writing this sentence", the helping verb is "am". It helps to express the tense of the action that is being carried out.
Learn more: https://brainly.com/question/11324711
Two projectiles are thrown with the same initial velocity, one at an angle and the other at an angle of . (a) Can both projectiles strike the ground at the same distance from the projection point? (b) Can both projectiles be in air for the same time interval?
Answer:
si quiero ser tu novia❤❤
PLEASE HELPPPPPPPPPP
Answer:
sorry me computer is blocking the picture but i will try to unblock so i can answer
Explanation:
Forces can...
A. Change speed of motion
B. Change shape of objects
C. Change direction of motion
D. All of the above
Answer:
D
Explanation:
Forces can change speed of motion, the more force that's applied when you push a ball for example, the faster the ball will go. Force can also change the shape of objects by applying pressure to them too. The inertia from force can change direction, as when you let's say hit a tennis ball, it won't go perfectly straight. So all of the above are correct
Accelerating car is a _______
•Law of inertia
•Law of universal gravitation
•Law of acceleration
•Law of conversation of energy
Acceleration is the rate of change of velocity as a function of time. For example a car traveling at 50 km/hr starts to accelerate, 10 seconds after, its speed changes to 100 km/hr then the acceleration of the car during the time can be calculated as below: initial speed = 50 km/hr.
A bullet (m=20g) shot with a speed of 800 m/s hits an oak tree and sticks 4cm inside it.
What is the average force acting on the bullet from the tree?
Hi there!
We can begin by converting cm to m:
4cm = 0.04 m
Use the following equation:
vf² = vi² + 2ad
The final velocity is 0 m/s, so:
0 = vi² + 2ad
vi² = -2(a)d
Plug in given values to solve for the acceleration:
800²/2(0.04) = -a
a = -8,000,000 m/s²
Find the force using the equation:
F = ma
F = (0.02)(-8,000,000) = -160,000 N
A hooligan throws a stone vertically down with an initial speed of 17 m/s from the roof of a building 51 metres above the
ground. How long in seconds does it take the stone to reach the ground?
Answer:
Explanation:
impact velocity is
√(18² + 2(-9.8)-51) = 36 m/s
average velocity is (17 + 36)/2 = 26.5 m/s
t = d/v = 51 / 26.5 = 1.9 s
or
if ground is origin and UP positive
0 = 51 - 17t - ½(9.8)t²
quadratic formula
t = (17 ±√(17² - 4(-4.9)(51))) / (2(-4.9))
t = (17 ± 36) / -9.8
t = - 5.4 s which we ignore as the stone is not thrown yet
or
t = 19 s
One type of BB gun uses a spring driven plunger to blow the BB from its barrel. Calculate the force constant of its plunger's spring if you must compress it 0.150 m to drive the 0.0500 kg plunger to a top speed of 20.0 m/s.
Answer:
a) 889 N / m
b) 133 N
How is an interference pattern formed by a diffraction grating different from the pattern formed by a double slit
Answer:
Evaluate the following numerical expressions.
6 + 3 • 4 =
18
(6 + 3) ÷ (4 – 5) =
Explanation:
Evaluate the following numerical expressions.
6 + 3 • 4 =
18
(6 + 3) ÷ (4 – 5) =
LEVEL 3
Write the correct order
of letters to the finish line.
A
B
с
Example:
ABCGH
G
H
IZAI
00
Answer:
We dont know all the info you need to take a sreenshot or piture of what your trying to show us.
Explanation:
F = kx
k = ?
Select one:
a. F/x
b .x/F
c. F + x
d. F − x
Answer:
[tex]F = kx \\ k = \frac{F }{x} [/tex]
so the answer is a
A monatomic ideal gas is compressed at a constant pressure of 0.293 atm from a volume of 8.26 L to 3.32 L. In the process, heat energy flows out of the gas. What is the work done on the gas?
The work done on the gas as it is compressed from volume 1 to volume 2 is 146.7 J.
Given the data in the question;
Pressure; [tex]P = 0.293 atm = 29688.225pa[/tex]Initial volume; [tex]v_1 = 8.26L = 0.00826m^3[/tex]Final volume; [tex]v_2 = 3.32L = 0.00332m^3[/tex]Work done on the gas; [tex]W = \ ?[/tex]
From the first law of thermodynamic:
[tex]W = -P\delta v[/tex]
Where W is work done, P is pressure and [tex]\delta v[/tex] is change in volume.
We substitute our values into the equation
[tex]W = -29688Pa * ( 0.00332m^3- 0.00826m^3)\\\\W = -29688Pa * -0.00494m^3\\\\W= 146.7 J[/tex]
Therefore, the work done on the gas as it is compressed from volume 1 to volume 2 is 146.7 J.
Learn more: https://brainly.com/question/356658
I HAVE NOOOO IDEA!!!!!!!!!! HELP!!!!!!!!!!
Use the equation for motion to answer the question.
x=x₀+ v₀t + 1/2at²
An object has a starting position of 2 m, a starting velocity of 15 m/s, and is moving at a constant speed. Which option shows the final position of the object after 1 s?
A. 30 m
B. 60 m
C. 32 m
D. 17 m
Answer:
17
Explanation:
In a chemical reaction, two molecules with a total mass of 76 amu react to form a single molecule. What is the mass of the molecule that is formed?
FIRST ANSWER GET EVERYTHING IN THE JOVID SUPPORT PACKAGE! :)
Answer:
The total number of atoms does not change, so mass is conserved in the reaction
So answer is 76
Explanation:
If you like my answer than please mark me brainliest thanks
In a chemical reaction, two molecules with a total mass of 76 amu react to form a single molecule. The mass of the molecule that is formed is equal to that of the total mass of two molecules which is 76 amu.
What is a Chemical reaction?A chemical reaction may be defined as a type of reaction in which two or more molecules are combined as reactants in order to form a new compound which is known as a product.
In this question, according to the law of conservation of mass, mass can neither be created nor be destroyed in a given chemical reaction. So, if the total mass of two reactant molecules is 76 amu, then the resultant product also bears the same mass.
Therefore, the mass of the molecule that is formed is equal to that of the total mass of two molecules which is 76 amu.
To learn more about the law of conservation of mass, refer to the link:
https://brainly.com/question/15289631
#SPJ5
Q1: Calculate the diameter of a copper conductor 300 m long such that it may carry 500 A with a voltage drop of 8 V. The resistivity of the copper may be taken as 0.019 m.
The diameter of a copper conductor is equal to 21.30 meters.
Given the following data:
Length = 300 mCurrent = 500 A Voltage = 8 VResistivity = 0.019To calculate the diameter of a copper conductor:
First of all, we would determine the resistance of the copper conductor by using the formula:
[tex]Resistance = \frac{Voltage }{Current} \\\\Resistance =\frac{8}{500}[/tex]
Resistance = 0.016 Ohms
Next, we would determine the area of the copper conductor:
[tex]Resistance = \frac{\rho l}{Area} \\\\Area = \frac{\rho l}{Resistance}\\\\Area = \frac{0.019 \times 300}{0.016}[/tex]
Area = 356.25 [tex]m^2[/tex]
For the diameter:
From the area of a circle, diameter is given by the formula:
[tex]Area = \frac{\pi d^2}{4} \\\\d=\sqrt{\frac{4A}{\pi} } \\\\d=\sqrt{\frac{4 \times 356.25}{3.142} }\\\\d=\sqrt{453.53}[/tex]
Diameter, d = 21.30 meters
Read more: https://brainly.com/question/25338451
A 20 kg block (4) rests on a frictionless table;
a cord attached to the block extends
horizontally to a pulley at the edge of the
table. A 10 kg mass (B) hangs
Answer:
Explanation:
F = ma
a = F/m
a = 10(9.8) / (10 + 20)
a = 3.3 m/s²
(T)ension in the cord
20(3.3) = 65 N
can anyone heelp me plzz
Answer:
the ans is D... good luck
HELP
If a car is traveling at constant speed of 70 kilometers per hour, how many hours will it take for the car to travel a distance of 28 kilometers
If a car is traveling at constant speed of 100 kilometers per hour, how many hours will it take for the car to travel a distance of 280 kilometers ?
If the velocity of a caer changes from 0 meters per second to 100 meters per second in 10 seconds, what is the acceleration over that 10 second period?
If the velocity of a caer changes from 20 meters per second to 60 meters per second in 4 seconds, what is the acceleration over that 4 second period ?
Answer:
Explanation:
28 / 70 = 0.3857142... = 0.39 hr
280 / 100 = 2.8 hrs.
(100 - 0) / 10 = 10 m/s²
(60 - 20) / 4 = 10 m/s²
Help please its 30 marks thanks for willing to help me
Answer:
Independent variable: Height
Dependent variable: time
Explanation:
Not sure what the experiment was, but assuming that this was the amount of time for a ball to reach the ground, the independent variable would be height since you determine and change the initial height. The dependent variable would be time since it changes with height, and you have to measure it.
An incompressible fluid is flowing through a horizontal pipe with a constriction. The velocity of the fluid in the wide section of the pipe is 5.00 m/s and the velocity of the fluid in the narrow section of pipe is 8.00 m/s. The pressure of the fluid in the wide section is 200 kPa. What is the pressure in the narrow section of the pipe
The Bermoulli's equation allows us to find the pressure in the narrow part of the pipe through which water circulates is:
P = 500 Pa
Bernoulli's equation is the work-energy relationship for fluids that are liquids and gases.
[tex]P_1 + \frac{1}{2} \rho v_1^2 + \rho g y_1 = P2 + \frac{1}{2} \rho v_2^2 + \rho g y_2[/tex]
Where the subscripts 1 and 2 represent points of interest, P is the pressure, ρ the density of the fluid, v the velocity and y the height.
They indicate that the pipe is horizontal, that the pressure in the wide part P₁ = 200 kPa and the velocity is v₁ = 5 m / s and in the narrow part v₂=8.00 m/s, see attached.
Since the pipe is horizontal y₁ = y₂
P₁ + ½ ρ v₁² = P₂ + ½ ρ v₂²
P₂ = P₁ + ½ ρ (v₁² - v₂²)
Let's calculate
P₂ = 200 10² + ½ ρ (5² - 8²)
P₂ = 2 10⁴ - 19.5 ρ
For a specific calculation the value of the density of the fluid is needed, suppose that the fluid is water ρ = 1000 kg / m³
P₂ = 2 10² - 19.5 1000
P₂ = 500 Pa
In conclusion using the Bermoulli equation we can find the pressure in the narrow part of the pipe through which water circulates is:
P = 500 Pa
Learn more here: brainly.com/question/9506577
