Object A has a mass of 5 kg and a velocity of 6 m/s to the east while Object 1 point B has a mass of 12 kg and velocity 0.6 m/s also to the east. What is the momentum of the system? (Let east be positive)
help plss I got family

Answer:

6.34×10⁹ seconds

Explanation:

Applying,

V = d/t............. Equation 1

Where V = speed plate, d =  distance covered by the plate, t = time it takes the plate to travel

make t the subject of the equation

t = d/V............ Equation 2

From the question,

Given: d = 5 cm/yr = (5×3.154×10⁻⁹) = 1.577×10⁻⁸ m/s,  d = 100 meter

Substitute these values into equation 2

t = 100/1.577×10⁻⁸

t = 6.34×10⁹ seconds

Hence the time it takes the the plate to travel is 6.34×10⁹ seconds

Answer:

g = 5 m/s square

Explanation:

Weight(W), Mass(m), Gravity(g)

W = mg

1,000N = 200g

g = 1000/200

g = 5 m/s square

Answer:

3.26 secs

Explanation:

Diameter of sphere ( D )= 10 mm

T1 = 75°C

P = 1 atm

T∞ = 23°C

T2 = 35°c

Velocity = 10 m/s

Determine how long it will take to cool the sphere to 35°C

Using the properties of copper and air given in the question

Nu = 2 + (Re)^0.8 (Pr)^0.33

hd / k = 2 + ( vd/v )^0.8 (Pr)^0.33

∴ h ≈  2594.7 W/m^2k

Given that :

(T2 - T∞) / ( T1 - T∞ )  = exp [ ( -hA / pv CP ) t ]  

( 35 - 23 ) / ( 75 - 23 ) = exp [  - 2594.7 * 6 * t / 8933 * 387 * 10 * 10^-3 ]

=  ln ( 12/52 ) = -1.466337069  =     - 0.45032919 *  t

∴ t ≈ 3.26 secs        ( -1.466337069 / -0.45032919 )

Answer:

C

Explanation:

Answer:

Computer hard drives use magnetism to store the data on a rotating disk. More complex applications include: televisions, radios, microwave ovens, telephone systems, and computers. An industrial application of magnetic force is an electromagnetic crane that is used for lifting metal objects.

Answer:

Examples of magnetic force is a compass, a motor, the magnets that hold stuff on the refrigerator, train tracks, and new roller coasters. All moving charges give rise to a magnetic field and the charges that move through its regions, experience a force.

I Hope this will help you if not then sorry :)

Answer:

I R 2

Explanat

Explanation:

hey

the answer is Brazil

hope it helps ✌

Answer:

B. Two tuning forks that vibrate at the same frequency are near each other. One tuning fork is struck with a mallet so that it vibrates.

Explanation:

A wave can be defined as a disturbance in a medium that progressively transports energy from a source location to another location without the transportation of matter.

In Science, there are two (2) types of wave and these include;

I. Electromagnetic waves: it doesn't require a medium for its propagation and as such can travel through an empty space or vacuum. An example of an electromagnetic wave is light.

II. Mechanical waves: it requires a medium for its propagation and as such can't travel through an empty space or vacuum. An example of a mechanical wave is sound.

An amplitude can be defined as a waveform that's measured from the center line (its origin or equilibrium position) to the bottom of a trough or top of a crest.

Resonance can be defined as a phenomenon in which an object is forced to vibrate as a result of the vibration of a second object at the same natural frequency of the first object. Thus, it's an increase in the amplitude of oscillation that occurs when the frequency of a periodically applied force is equal to the natural frequency of the system on which it's acting.

Hence, the scenario that best describe a condition in which resonance can occur is two tuning forks that vibrate at the same frequency are near each other. One tuning fork is struck with a mallet so that it vibrates.

Answer:

B Two tuning forks that vibrate at the same frequency are near each other. One

tuning fork is struck with a mallet so that it vibrates.

Explanation: hope this helps ;)

Answer:

h = 2.78 m

Explanation:

Potential Energy(PE)

Mass(m)

Gravity(g) which is approximately equal to 10.

Height (h)

PE = mgh

41772.5 = 1500 * 10 * h

41772.5 = 15000h

h = 41772.5/15000

h = 2.78 m

Answer:

d. Is indicated when a magnetometer measures intervals of magnetism that are weaker than expected

Explanation:

Magnetic field intensity is measured with a magnetometer on the surface of the Earth. Areas in which the magnetic field strength is lower or more than average are known as areas with magnetic anomalies, which may be due to  the presence of rocks that have a different magnetic characteristics

Where the magnetic anomaly is negative, it is indicative of a magnetic field strength reading that is lower than average magnetic field which is generally obtainable

Therefore, the correct option is indicated when a magnetometer measures intervals of magnetism that are weaker than expected

It is a process of offering jobs to desired candidates and offering jobs to the desired applicant.

Answer:

enjoy

Explanation:

The number of time a cricket chirps in a minute is a function of the temperature in the formula: n=4t-160, where n=number of times a cricket chirps a minute and t=temperature in farenheit. You can use the temperature t=(1/4)n+40 to estimate the temperature based on the number of chirps per minute.

Answer:

Amplitude.

Explanation:

A wave can be defined as a disturbance in a medium that progressively transports energy from a source location to another location without the transportation of matter.

In Science, there are two (2) types of wave and these include;

I. Electromagnetic waves: it doesn't require a medium for its propagation and as such can travel through an empty space or vacuum. An example of an electromagnetic wave is light.

II. Mechanical waves: it requires a medium for its propagation and as such can't travel through an empty space or vacuum. An example of a mechanical wave is sound.

An amplitude can be defined as a waveform that's measured from the center line (its origin or equilibrium position) to the bottom of a trough or top of a crest.

Hence, an amplitude is a word that describes the maximum displacement a point moves from its rest position when a wave passes.

On a graph, the vertical axis (y-axis) is the amplitude of a waveform and this simply means that, it's measured vertically.

Mathematically, the amplitude of a wave is given by the formula;

x = Asin(ωt + ϕ)

Where;

x is displacement of the wave measured in meters.

A is the amplitude.

ω is the angular frequency measured in rad/s.

t is the time period measured in seconds.

ϕ is the phase angle.

Answer:

Explanation:

By the time the hot water gets to the place where it can be used for heating, it will have lost a great deal of energy to the surroundings.

The way to prevent that from happening is to insulate the pipeline with fiber glass like house insulation. Of course since this is a physics question and not an engineering problem, you could move the power station closer to the houses to be heated.

The use of Insulating Layers with low Conduction Coefficients and radii greater than Critical Radius diminish Losses and gives important Savings in terms of Energy Efficiency.

The main problem of Transportation of Waste Energy through Long Distances is the heat transfer between the Fluid flowing through the Tube and Surroundings. Heat Losses are directly proportional to the Distance travelled by the Fluid.

A possible way to minimize this Problem is to isolate outer surface of Tubes with materials with low Conduction Coefficients. at Critical Radius, in which Heat Losses reach its theoretical Maximum, from which Heat Transfer tends to diminish at greater radii.

According to the Theory of Heat Transfer, the Critical Radius of the Insulating Layer is equal to:

[tex]r_{c} = \frac{k}{h}[/tex] (1)

Where:

Using materials with low Conduction Coefficient minimize Thickness requirements and, therefore, overall costs tends to sink when [tex]r > r_{c}[/tex].

Hence, the use of Insulating Layers with low Conduction Coefficients and Radii greater than Critical Radius diminish Losses and gives important Savings in terms of Energy Efficiency.

Answer:

the product of mass and velocity

....in my syllabus

Answer:

option C

Explanation:

Final velocity of the object is 114 m / s. Hence, final velocity of the object is 114 m / s.

Answer:

Explanation:

i) frequency is the square root of the quotient of Tension over linear density/ all divided by two times the length.

linear density and tension are constant, so the numerator remains constant

The length is doubled, so the frequency is halved.

f = 128 Hz

ii) Doubling the tension increases the frequency by √2

f = 256√2 = 362 Hz

2) If other factors remain constant, increasing tension increases frequency.

Answer:

velocity

Explanation:

this is because velocity has both magnitude and direction

Answer:

Alkaline batteries have longer shelf life than other batteries of the chloride type electrolyte batteries. They have a much higher energy density compared with other batteries. This allows the battery to produce the same energy while lasting longer than other batteries.

Advantage

1) Alkaline battery lasts long than other batteries  

2) It have a  much higher energy density

Disadvantage :

1) They are heavier and bulkier

2) They have high internal resistance

An alkaline battery is a type of primary battery that derives its energy from the reaction between zinc metal and manganese dioxide.

Advantage

Alkaline battery   can produce same amount of energy by lasting longer than other batteries  as it have longer shelf life than  lead acid accumulator​

Alkaline battery  have a much higher energy density compared to lead acid accumulator

Disadvantage :

Alkaline battery  are heavier and bulkier

Alkaline battery   have high internal resistance

learn more about Alkaline battery  

https://brainly.com/question/12580609?referrer=searchResults

#SPJ2

Answer:

It is the inability of the body to change by itself its state of rest or uniform motion or direction. Types of Inertia- It is of three types-(1)Inertia of rest (2) Inertia of motion(3) Inertia of direction. (1) Inertia of rest - It is the inability of the body to change by itself its state if rest.

Answer:

d. No, porque la ecuación de trabajo lo define.

Explanation:

En Física, el trabajo realizado se puede definir como la cantidad de energía transferida cuando un objeto o cuerpo se mueve a lo largo de una distancia debido a la acción de una fuerza externa.

Matemáticamente, el trabajo realizado viene dado por la fórmula;

[tex] W = F * d [/tex]

Dónde;

Por lo tanto, podemos deducir de la definición de trabajo y su fórmula que el trabajo se realiza cuando un objeto (cuerpo) se mueve una distancia o experimenta cualquier forma de desplazamiento mientras transfiere energía.

Answer:

I. Period = 1.3 seconds

II. Frequency = 0.769 Hertz

Explanation:

Given the following data;

Number of oscillation = 240 cycles

Time = 5.2 minutes.

Conversion:

1 minute = 60 seconds

5.2 minutes = X seconds

X = 60 * 5.2

X = 312 seconds

To find the following;

I. Period

Mathematically, the number of oscillation of a pendulum is given by the formula;

[tex] Number \; of \; oscillation = \frac {Time}{Period} [/tex]

Making period the subject of formula, we have;

[tex] Period = \frac {Time}{Number \; of \; oscillation} [/tex]

Substituting into the formula, we have;

[tex] Period = \frac {312}{240} [/tex]

Period = 1.3 seconds

II. Frequency

[tex] Frequency = \frac {1}{Period} [/tex]

Substituting the values into the formula, we have;

[tex] Frequency = \frac {1}{1.3} [/tex]

Frequency = 0.769 Hertz

Answer:

nước sôi: 440/17 l

nước 15°C:1260/17 l

Answer:

Weight = Mass × Gravitational field strength

Explanation:

The mass of the skydiver = 70 kg

The weight of the skydiver, W, is given as follows;

W = m × g

Where-

g = The gravitational field strength ≈ 9.81 m/s²

Therefore, the equation linking weight mass and gravitational field strength is presented as follows;

Weight = Mass × Gravitational field strength

Answer:

D

Explanation:

Cá xương, chim, thú, cá sấu không có sự pha trộn máu giàu O2 và máu giàu CO2 ở tim vì tim cá có 2 ngăn, tim các loài chim, thú, cá sấu có 4 ngăn

i believe it would be Star A since Point A is a dwarf star and dwarf stars are usually most likely to have red coloring

Answer:

Star A

Explanation:

Literally the question has provided the answer itself

Calculation not required.

See the wordings

First star is dwarf star .

Dwarf star is mostly reddish brown or red colored .

Hence star A is the answer

Answer:

F1=26N and F2=09N ..this is from the two simultaneously equations

Answer:

The speed of the object when displacement is 0.041 meters is 0.375 meters per second.

Explanation:

First, we need to determine the angular frequency of the system ([tex]\omega[/tex]), in radians per second:

[tex]\omega = \sqrt{\frac{k}{m} }[/tex] (1)

Where:

[tex]k[/tex] - Spring constant, in newtons per meter.

[tex]m[/tex] - Mass, in kilograms.

If we know that [tex]k = 10\,\frac{N}{m}[/tex] and [tex]m = 0.36\,kg[/tex], then the angular frequency of the system is:

[tex]\omega = \sqrt{\frac{10\,\frac{N}{m} }{0.36\,kg} }[/tex]

[tex]\omega \approx 5.270\,\frac{rad}{s}[/tex]

The kinematic formulas for the position ([tex]x(t)[/tex]), in meters, velocity ([tex]\dot x(t)[/tex]), in meters per second, and acceleration of the object ([tex]\ddot x(t)[/tex]), in meters per square second, are:

[tex]x(t) = A\cdot \cos \omega t[/tex] (2)

[tex]\dot x(t) = -\omega \cdot A \cdot \sin \omega t[/tex] (3)

[tex]\ddot x(t) = -\omega^{2}\cdot A \cdot \cos \omega t[/tex] (4)

Where [tex]A[/tex] is the amplitude of the motion, in meters.

From (2) we determine the time associated with position [tex]x(t) = 0.041\,m[/tex] ([tex]\omega \approx 5.270\,\frac{rad}{s}[/tex], [tex]A = 0.082\,m[/tex]):

[tex]t = \frac{1}{\omega}\cdot \cos^{-1} \left(\frac{x(t)}{A} \right)[/tex] (5)

[tex]t = \frac{1}{5.270\,\frac{rad}{s} }\cdot \cos^{-1}\left(\frac{0.041\,m}{0.082\,m} \right)[/tex]

[tex]t = 0.199\,s[/tex]

And the speed of the object is:

[tex]\dot x(t) = -\left(5.270\,\frac{rad}{s} \right)\cdot (0.082\,m)\cdot \sin \left[\left(5.270\,\frac{rad}{s} \right)\cdot (0.199\,s)\right][/tex]

[tex]\dot x(t) \approx -0.375\,\frac{m}{s}[/tex]

The speed of the object when displacement is 0.041 meters is 0.375 meters per second.