Is This An Igneous Rock Or Metamorphic Or Sedimentary?

Answer:

What food web?

Explanation:

Answer:

2.109 atm

Explanation:

This is Gay-Lussac's Law when the temperature of a sample of gas in a rigid container is increased, the pressure of the gas increases as well. The increase in kinetic energy results in the molecules of gas striking the walls of the container with more force, resulting in a greater pressure. Gay-Lussac's Law states that the pressure of a given mass of gas varies directly with the absolute temperature of the gas, when the volume is kept constant. Gay-Lussac's Law is very similar to Charles's Law, with the only difference being the type of container.

So for this one:

[tex]\frac{P_{1} }{T_{1}} =\frac{P_{2} }{T_{2}}[/tex]

Rearrange it to

P2= (P1 x T2)/T1

P2= (450 x 1.5)/320 = 2.109 atm

Answer: I think it could be Decomposition

Explanation: I think is composition because decomposition starts by being together and ends up as two

Answer:

hope you liked it!!!!!!

A compound is a pure substance that is composed of elements chemically bonded in definite proportions. A compound can be broken down into simpler substances only by chemical reactions, such as electrolysis.

A solution is a homogeneous mixture, meaning that it is the same throughout. A solution is composed of one or more solutes dissolved in a solvent. The proportions of the solute(s) can vary, as the components of a solution are not chemically bonded. The components of a mixture can be separated by physical means, such as filtration and distillation

Answer:

The upper and lower limits for the room-temperature thermal conductivity of a magnesium oxide material having a volume fraction of 0.10 of pores that are filled with still air are

Ku = 38.252 W/mK

K lower = 0.199 W/mK

Explanation:

As we know  

Ku = Vp * Kair + Vmagnesium * K metal  

Ku = 0.10 *0.02 + (1-0.25) * 51

Ku = 38.252 W/mK

The lower limit  

K lower = Kmetal* Kair/( Vp * Kmetal + Vmetal * K air)

K lower = (0.02*51)/(0.10*51 + 0.90 * 0.02)

K lower = 0.199 W/mK

Answer:

A

Explanation:

Reactants are on the right side of the chemical reaction

Answer:

h2

Explanation:

Answer: It will take 425 hours to plate 19.5 kg of copper onto the cathode if the current passed through the cell is held constant at 38.5 A.

Explanation:

The half-reaction equation is as follows.

[tex]Cu^{2+} + 2e^{-} \rightarrow Cu[/tex]

According to the standard values, 1 mole of an electron carries 96500 C. Therefore, charge carried by 2 moles of electrons is [tex]2 \times 96500 C[/tex].

Also, atomic mass of Cu is 63.5 g. According to the equation 2 moles of electrons are depositing 63.5 g of Cu.

Hence, charge required to deposit 19.5 kg (1 kg = 1000 g) or 19500 g of Cu is calculated as follows.

[tex]19500 g Cu \times \frac{2 \times 96500 C}{63.5 g Cu}\\= 5.92 \times 10^{7} C[/tex]

Formula used to calculate time is as follows.

[tex]Q = I \times t[/tex]

where,

Q = charge

I = current

t = time

Substitute the values into above formula as follows.

[tex]5.92 \times 10^{7} C = 38.5 \times t\\t = \frac{5.92 \times 10^{7} C}{38.5}\\= 1.53 \times 10^{6} sec[/tex]

As 1 hour contains 3600 seconds. So, converting seconds into hours as follows.

[tex]1.53 \times 10^{6} sec = 1.53 \times 10^{6} sec \times \frac{1 hr}{3600 sec}\\= 425 hr[/tex]

Thus, we can conclude that it will take 425 hours to plate 19.5 kg of copper onto the cathode if the current passed through the cell is held constant at 38.5 A.

Answer: Amount of moles is 0.47 mol

Explanation: Amount of moles n = cV = 0.55 M · 0.85 l = 0.4675 mol

There are 0.4675 moles of KI in 0.85L of a 0.55 M KI solution

WHAT IS MOLARITY?

Molarity is a measure of the concentration of a solution. It is calculated by dividing the number of moles (n) of a solute by the volume of a solution (V)

Molarity = number of moles (n) ÷ volume (V)

According to this question, the molarity of a KI solution with a volume of 0.85L is 0.55 M. Hence, the number of moles of KI in the solution can be calculated as follows:

Molarity = n/V

0.55 = n/0.85

n = 0.55 × 0.85

n = 0.4675 moles

Therefore, there are 0.4675 moles of KI in 0.85L of a 0.55 M KI solution.

Learn more: https://brainly.com/question/13386686

Answer:

C. 30.

Explanation:

Hello there!

In this case, according to the definition of the solubility, as the maximum amount of a solute that can be completely dissolved in a solvent without the formation of a precipitate, we can see that at the vertical line of 20 °C, on the KNO3 curve, we can see an intercept at about 30.

Such 30 means that just 30 grams of KNO3 will be completely dissolved in 100 g of water at 20°C, by means of its temperature dependent solubility; and therefore the answer is C. 30.

Regards!

Answer:

it is released as lower energy

lower energy will be the answer

hope it helps!!!!!

Answer:

there are 4 hydrogen so

A.the mass of Hydrogen in the reactant side of the equation above is 1×4=4 amu.

B.the mass of Hydrogen on the product side of the equation above =1×4=4 amu.

Note: mass of reactant =mass of product.

Answer:

With an increase in temperature, the particles move faster as they gain kinetic energy, resulting in increased collision rates and an increased rate of diffusion. ... With an increase in temperature, the particles gain kinetic energy and vibrate faster and more strongly.

Explanation:

Answer:

c I do believe good luck with the answer

Answer:

ed

Explanation:

ed

Answer:

d water I believe I'm sorry if it's wrot

Partly cloudy

Explanation:

Answer:

202 °C

Explanation:

From the question given above, the following data were obtained:

Initial temperature (T₁) = 90 °C

Initial volume (V₁) = 15.5 L

Final volume (V₂) = 20.3 L

Final temperature (T₂) =?

Next, we shall convert 90 °C to Kelvin temperature. This is illustrated below:

T(K) = T(°C) + 273

Initial temperature (T₁) = 90 °C

Initial temperature (T₁) = 90 °C + 273

Initial temperature (T₁) = 363 K

Next, we shall determine the final temperature.

Initial temperature (T₁) = 363 K

Initial volume (V₁) = 15.5 L

Final volume (V₂) = 20.3 L

Final temperature (T₂) =?

V₁ / T₁ = V₂ / T₂

15.5 / 363 = 20.3 / T₂

Cross multiply

15.5 × T₂ = 363 × 20.3

15.5 × T₂ = 7368.9

Divide both side by 15.5

T₂ = 7368.9 / 15.5

T₂ ≈ 475 K

Finally, we shall convert 475 K to celsius temperature. This is illustrated below:

T(°C) = T(K) – 273

T₂ = 475 – 273

T₂ = 202 °C

Thus, the new temperature of the gas is 202 °C

Answer:

a functional group is a specific group of atoms or bonds within a compound that is responsible for the characteristic chemical reactions of that compound.

Explanation:

mark as brainliest!!

Answer:

See Explanation

Explanation:

Specific heat capacity is an intensive physical property of matter. It is a measure of the quantity of heat that must be supplied in order to change the temperature of a unit mass of a substance by 1°C.

The specific heat capacity of a substance determines the quantity of heat that must be supplied in order to effect a temperature change of a unit mass of a substance. The higher the specific heat capacity of a substance, the greater the quantity of heat required to effect a temperature change in a given mass of the substance.

The specific heat capacity of water is 4,200 Joules per kilogram while the specific heat capacity of copper is 385 Joules per kilogram. Hence, the heat capacity of water is far greater than that of copper and consequently, 50 g of copper require less heat (q) than 50 g of water, in order to raise the temperature by 15 oC.

Answer:

the oxidation state of nitrogen is +5

Explanation:

There are 6.022x1023 molecules in 1 mole of SO3 (Avogadro's number) so in 0.25 moles, there are (0.25)(6.022x1023) molecules in the 0.25 moles of SO3. or 1.506x1023 molecules per 0.25 moles of SO3.

There is one atom of sulfur in each molecule of SO3. So there are 1.506x1023 atoms of sulfur in 0.25 moles of SO3.

According to the concept of Avogadro's number there are 0.7525 ×10²³ atoms of sulfur in 0.125 moles of sulfur.

Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.

It has a SI unit of reciprocal mole whose numeric value is expressed in reciprocal mole which is a dimensionless number and is called as Avogadro's constant.It relates the volume of a substance with it's average volume occupied by one of it's particles .

According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.

Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number

In the given example, number of atoms of sulfur are calculated as, Avogadro's number×number of moles, that is,6.022×10²³ ×0.125=0.75275×10²³ atoms

Therefore, there are 0.75275×10²³ atoms in 0.125 moles of sulfur.

Learn more about Avogadro's number,here:

https://brainly.com/question/11907018

#SPJ2

Answer:

0.068 moles of sodium hydroxide would have to be added to 150 mL of a 0.483 M acetic acid solution

Explanation:

As we know  

pH = pKa + log [salt]/[acid]

4.480= 4.74 + log [salt]/[acid]

log [salt]/[]acid] = -0.06

[salt]/[acid] = 0.87

moles acid = 0.150 L x 0.483 mol/L = 0.07245 moles acid

x/0.07245-x = 0.87

X- 0.07245 X = 0.87 *0.07245

X = 0.068 moles

Answer:

Large temperature and air pressure decrease.

Temperature and air pressure increase.

Explanation:

The correct options about fonts and weather maps are:

Cold fronts appear on weather maps in areas of Large temperature and air pressure decrease.

Warm fronts appear on weather maps in areas of Temperature and air pressure increase.

Similar to a cold front, there is usually a noticeable temperature change from one side of the warm front to the other.

A cold front occurs when colder air replaces warmer air, while a warm front occurs when warmer air replaces cold air.

Thus, the correct options are:

Cold fronts appear on weather maps in areas of Large temperature and air pressure decrease.

Warm fronts appear on weather maps in areas of Temperature and air pressure increase.

Learn more about warm front

https://brainly.com/question/12375861

#SPJ2

Answer:

I don't know

Explanation:

give me you research

Answer:

KCI is rhe solute in a homogeneous mixture

Answer:

1. KCI is the solute in a homogeneous mixture.

Explanation:

Answer:

Following are the solution to the given question:

Explanation:

Please find the ionic compound in the solution file:

Following are the three functional groups which affected by pH:  

Answer:

To keep the evinermental machinces working

Explanation: