The magnitude of the resultant displacement is approximately 400.13 paces, and the direction is approximately -79.59 degrees
To find the magnitude and direction of the resultant displacement, we can break down the given instructions into vector components and then sum them up.
Given:
Step 1: Go 490.1 paces at 106 degrees.
Step 2: Turn to 218 degrees and walk 246 paces.
Step 3: Travel 95 paces at 275 degrees.
Step 1:
The first step involves moving 490.1 paces at an angle of 106 degrees. We can break this down into its x and y components using trigonometry.
x1 = 490.1 * cos(106 degrees)
y1 = 490.1 * sin(106 degrees)
Step 2:
In the second step, we turn to 218 degrees and walk 246 paces. Again, we can find the x and y components using trigonometry.
x2 = 246 * cos(218 degrees)
y2 = 246 * sin(218 degrees)
Step 3:
For the third step, we travel 95 paces at 275 degrees. Finding the x and y components:
x3 = 95 * cos(275 degrees)
y3 = 95 * sin(275 degrees)
Now, we can sum up the x and y components to find the resultant displacement.
Resultant x-component = x1 + x2 + x3
Resultant y-component = y1 + y2 + y3
Finally, we can calculate the magnitude and direction of the resultant displacement.
Magnitude: Magnitude = sqrt((Resultant x-component)^2 + (Resultant y-component)^2)
Direction: Direction = atan2(Resultant y-component, Resultant x-component)
Calculating the values using the given equations:
Resultant x-component ≈ 82.41 paces
Resultant y-component ≈ -392.99 paces
Magnitude ≈ sqrt((82.41)^2 + (-392.99)^2) ≈ 400.13 paces
Direction ≈ atan2(-392.99, 82.41) ≈ -79.59 degrees
Therefore, the magnitude of the resultant displacement is approximately 400.13 paces, and the direction is approximately -79.59 degrees (counterclockwise from due East).
To learn more about displacement
https://brainly.com/question/321442
#SPJ11
#3. Find the n^{\text {th }} term of the arithmetic sequence with given first term a and common difference d . What is the 9^{\text {th }} term? a=14, \quad d=-\frac{3}{2}
The 9th term of the arithmetic sequence with given first term a and common difference d is 2.
Given, First term of the arithmetic sequence (a) = 14
Common difference (d) = -3/2
To find : nth term of the arithmetic sequence
Formula of nth term of arithmetic sequence is given by;
an = a1 + (n - 1)d
Where,an = nth term of arithmetic sequence
a1 = first term of arithmetic sequence
n = number of terms in the arithmetic sequence
d = common difference
Substituting the given values, we get
a9 = a1 + (9 - 1)d
= 14 + (8) × (-3/2)
= 14 - 12
= 2
Therefore, the 9th term of the arithmetic sequence with given first term a and common difference d is 2.
To know more about sequence visit:
https://brainly.com/question/24256726
#SPJ11
Find y as a function of x if y′′−9y′′+18y′=50e^2
The auxiliary equation of the given differential equation: [tex]y^2-9y+18 = 0[/tex]Solving for y:
Now, we find the complementary function:
[tex]Y_c = c_1 * e^2x + c_2 * e^3x[/tex]
We can observe that the right side of the equation is of the form of the non-homogeneous part which is 50e^(2x).
Therefore, we assume the particular solution of the form:
[tex]Y_p = Ae^(2x)[/tex]where A is a constant.
Taking the derivatives of[tex]y_p: y_p' = 2Ae^(2x)y_p'' = 4Ae^(2x)[/tex]
Putting the values of [tex]y_p, y_p', and y_p''[/tex]in the given differential equation,
We have:
[tex]4Ae^(2x) - 9(2Ae^(2x)) + 18(2Ae^(2x)) = 50e^(2x)[/tex]
Simplifying the equation:[tex]4A - 18A + 36A = 50A = 1.25[/tex]
The particular solution is:[tex]Y_p = 1.25e^(2x)[/tex]
Hence, the general solution to the given differential equation:[tex]y(x) = Y_c + Y_p[/tex]
Where Y_c is the complementary function and Y_p is the particular solution obtained.
Therefore,[tex]y(x) = c_1 * e^2x + c_2 * e^3x + 1.25e^(2x)[/tex]
To know more about auxiliary equation visit:
https://brainly.com/question/33109497
#SPJ11
2. Show that \( \vec{\alpha}(t)=\left(t, 1+\frac{1}{t}, \frac{1}{t}-t\right), t>0 \) lies on a plane \( P \). \( P= \) ?
There are no values of \( t \) that satisfy all the equations simultaneously. This means that the vector function \( \vec{\alpha}(t) \) does not lie on any plane \( P \).
To show that the vector function \( \vec{\alpha}(t) = \left(t, 1+\frac{1}{t}, \frac{1}{t}-t\right) \) lies on a plane \( P \), we need to find the equation of the plane.
Let's express the vector \( \vec{\alpha}(t) \) as a linear combination of two linearly independent vectors that lie in the plane \( P \). We can choose two vectors \( \vec{v_1} \) and \( \vec{v_2} \) that are not collinear. The plane \( P \) can be represented by the equation:
\( \vec{r} = \vec{a} + s\vec{v_1} + t\vec{v_2} \),
where \( \vec{r} \) is a vector in the plane, \( \vec{a} \) is a position vector to a point on the plane, and \( s \) and \( t \) are scalars.
We can rewrite \( \vec{\alpha}(t) \) as:
\( \vec{\alpha}(t) = t\vec{i} + \left(1+\frac{1}{t}\right)\vec{j} + \left(\frac{1}{t}-t\right)\vec{k} \).
Comparing the coefficients of \( \vec{i} \), \( \vec{j} \), and \( \vec{k} \), we have:
\( t = s \) (coefficient of \( \vec{v_1} \))
\( 1+\frac{1}{t} = t \) (coefficient of \( \vec{v_2} \))
\( \frac{1}{t}-t = 0 \) (coefficient of \( \vec{k} \))
From the third equation, we get \( \frac{1}{t} = t \), which implies \( t = \pm 1 \). Since \( t > 0 \), we have \( t = 1 \).
Substituting \( t = 1 \) into the second equation, we have:
\( 1 + \frac{1}{1} = 1 \),
which simplifies to \( 2 = 1 \), which is not true.
Therefore, there are no values of \( t \) that satisfy all the equations simultaneously. This means that the vector function \( \vec{\alpha}(t) \) does not lie on any plane \( P \).
In conclusion, the vector \( \vec{\alpha}(t) = \left(t, 1+\frac{1}{t}, \frac{1}{t}-t\right) \) does not lie on a plane \( P \).
Learn more about vector function here
https://brainly.com/question/28479805
#SPJ11
Calculate the sample proportion and the margin of error, and construct the confidence interval for the population proportion using the normal approximation to the p^ distribution for both of the following (if it is appropriate to do so): a. x=10,n=35,α=0.01 a. x=10,n=35,α=0.01
p^ = Round to 3 significant digits E= Round to 3 significant digits. Enter 0 if it is not appropriate to do so Round to 3 significant digits. Enter 0 if it is not appropriate to do so
a) For x=10 and n=35 with a significance level of α=0.01, the sample proportion (p^) is 0.286, the margin of error (E) is 0.127, and the confidence interval for the population proportion is (0.159, 0.413).
b) For x=11 and n=29 with a significance level of α=0.02, the sample proportion (p^) is 0.379, the margin of error (E) is 0.189, and the confidence interval for the population proportion is (0.19, 0.568).
a) To calculate the sample proportion (p^), divide the number of successes (x) by the total number of observations (n). In this case, p^ = 10/35 = 0.286 (rounded to 3 significant digits).
To calculate the margin of error (E) using the normal approximation to the p^ distribution, use the formula E = z × √(p^ × (1 - p^) / n), where z is the z-score corresponding to the desired confidence level. Since the significance level is α=0.01, the corresponding z-score can be found using a standard normal distribution table. For α=0.01, the z-score is approximately 2.576. Plugging in the values, E = 2.576 × √(0.286 × (1 - 0.286) / 35) = 0.127 (rounded to 3 significant digits).
The confidence interval for the population proportion is given by p^ ± E. Therefore, the confidence interval is 0.286 ± 0.127, which translates to (0.159, 0.413) after rounding to 3 significant digits.
b) Following the same steps as in part (a), the sample proportion (p^) is 0.379 (rounded to 3 significant digits), and the margin of error (E) is 0.189 (rounded to 3 significant digits).
The confidence interval for the population proportion is p^ ± E, which gives us 0.379 ± 0.189. After rounding to 3 significant digits, the confidence interval becomes (0.19, 0.568).
Please note that the answer provided assumes that the sample sizes are sufficiently large and that the conditions for using the normal approximation to the p^ distribution are met. Additionally, the significance level (α) is used to determine the z-score for the margin of error calculation.
Learn more about confidence interval here:
https://brainly.com/question/32278466
#SPJ11
Show that in plane polar coordinates:
e
^
r
=cosθ
^
+sinθ
^
e
^
θ
=−sinθ
^
+cosθ
^
Find
dt
d
e
^
r
and
dt
d
e
^
θ
In plane polar coordinates, the unit vector in the radial direction (er) is equal to cos(θ)î + sin(θ)ĵ, and the unit vector in the angular direction (eθ) is equal to -sin(θ)î + cos(θ)ĵ. The derivatives of er and eθ with respect to time (t) are found by differentiating the components of the vectors.
To find the derivative of er with respect to t (dt/d(er)), we differentiate the components of er with respect to t. Since er = cos(θ)î + sin(θ)ĵ, we can differentiate each component separately:
dt/d(er) = d(cos(θ))/dt î + d(sin(θ))/dt ĵ.
The derivative of cos(θ) with respect to t is zero, as it does not depend on time. Similarly, the derivative of sin(θ) with respect to t is also zero. Therefore, dt/d(er) = 0î + 0ĵ = 0.
Similarly, to find the derivative of eθ with respect to t (dt/d(eθ)), we differentiate the components of eθ with respect to t:
dt/d(eθ) = d(-sin(θ))/dt î + d(cos(θ))/dt ĵ.
The derivative of -sin(θ) with respect to t is zero, and the derivative of cos(θ) with respect to t is also zero. Therefore, dt/d(eθ) = 0î + 0ĵ = 0.
Hence, the derivatives of er and eθ with respect to time (t) are both zero, indicating that these unit vectors do not change with time in plane polar coordinates.
Learn more about ccoordinates here:
https://brainly.com/question/32836021
#SPJ11
Vector A : magnitude =2, angle =90 degree Vector B : magnitude =2, angle =0 degree (all the angles are from positive x-axis in counterclockwise) Vector C is sum of vector A and B(A+B=C) What is angle of Vector C? (in degree)
The angle of Vector C is 45 degrees when Vector A has a magnitude of 2 and an angle of 90 degrees, and Vector B has a magnitude of 2 and an angle of 0 degrees.
To calculate the angle of Vector C, which is the sum of Vector A and Vector B, we can use the Pythagorean theorem. The Pythagorean theorem establishes the relationship between the sides of a right triangle and its hypotenuse. It states that the sum of the squares of the two shorter sides of a right triangle is equal to the square of the hypotenuse.
In this case, Vector A and Vector B can be considered as the two shorter sides of a right triangle, and Vector C is the hypotenuse. We have the following information:
Vector A: Magnitude = 2, angle = 90 degrees
Vector B: Magnitude = 2, angle = 0 degrees
The sum of Vector A and Vector B will give us Vector C. We can represent Vectors A and B in terms of their x and y components. Let's calculate:
Vector A: A = 2cos90°i + 2sin90°j = 0i + 2j = 2j
Vector B: B = 2cos0°i + 2sin0°j = 2i + 0j = 2i
Thus, Vector C = A + B = 0i + 2j + 2i + 0j = 2i + 2j
To calculate the magnitude of Vector C:
|C| = sqrt((2i)^2 + (2j)^2)
|C| = sqrt(4 + 4) = sqrt(8)
The magnitude of Vector C is sqrt(8).
To calculate the angle of Vector C, we can use the tangent function:
tan(θ) = Opposite / Adjacent
tan(θ) = 2j / 2i
θ = atan(j/i)
θ = atan(1)
θ = 45 degrees
To know more about Pythagorean theorem.
https://brainly.com/question/14930619
#SPJ11
Consider the triangle in the plane defined by the vertices (0, 0) , ( 2 , 3) and (1, 0). For each of the below problems, provide an integral or sum of integrals which provides the volume of the solid of revolution formed by revolving the region about the indicated axis while using the method mentioned in the problem. Do not do the integrals.
a. About the line x = 3, use method of washers/disks.
b. About the line x = 3, use the method of shells.
a) For the solid of revolution when the triangle is rotated about x = 3 using washers/disks, the integral of pi(radius^2) dx should be used. b) For the same, using shells, ∫ 2πr h dx.
The solid of revolution refers to the solid generated by revolving the region about a particular axis. In this case, we are supposed to calculate the volume of the solid of revolution formed by the triangle (0, 0), (2, 3), and (1, 0) while using the methods of washers/disks and shells respectively.
a) For the first problem, when the solid of revolution is rotated about the line x = 3, we will use washers/disks method. Therefore, we will have to find the radius of the washers which would be the distance between x = 3 and the line x = 0. We can get it as (3 - x). We will then square the radius and multiply it by pi and dx and integrate. ∫ π(radius^2) dx.
b) For the second problem, we use the method of shells.
We can do it by finding the height and the radius of the shells at each x and then integrate. ∫ 2πr h dx.
Learn more about solid of revolution here:
https://brainly.com/question/23260581
#SPJ11
A machine is designed to produce an assembled unit every 4.75 seconds. During a 12 hour shift it is unavailable for 45 minutes on average due to start-up problems and preventative maintenance. On average it produces 8,232 good quality assembled units during the shift and has a defect rate of 2%. Calculate the Overall Equipment Effectiveness (OEE).
Overall Equipment Effectiveness (OEE) is a performance measure that is commonly used to assess the effectiveness and efficiency of the equipment in a manufacturing process.
It calculates the percentage of time the equipment is available, the rate at which it produces good quality products, and the quality of the products produced. A machine produces an assembled unit every 4.75 seconds. It is unavailable for 45 minutes on average during a 12-hour shift due to start-up problems and preventative maintenance.
The number of good quality assembled units produced during the shift is 8,232, and the defect rate is 2%.
To calculate the OEE, we need to calculate three metrics: Availability, Performance, and Quality.
Availability:It is the percentage of time that the machine is available to produce good quality products. The formula to calculate the Availability is:
Availability = (Operating time − Downtime) / Operating time.
Downtime = 45 minutes = 2700 seconds.
Operating time = 12 hours − 45 minutes = 11.25 hours = 40500 seconds.
Availability = (40500 - 2700) / 40500 = 0.9333.
Performance:It is the ratio of actual production to the maximum production rate that can be achieved. The formula to calculate the Performance is:
Performance = Actual Production / Maximum Production.
Maximum Production = 1 / 4.75 * 60 * 60 * 11.25 = 9,720Actual Production = 8,232Performance = 8,232 / 9,720 = 0.8462.
Quality:It is the percentage of good quality products produced. The formula to calculate Quality is:
Quality = (Total Production − Defective Units) / Total Production.
Total Production = Actual Production = 8,232Defective Units = 2% of Total Production = 0.02 * 8,232 = 165.28Quality = (8,232 − 165.28) / 8,232 = 0.9800OEE:It is the product of Availability, Performance, and Quality.
The formula to calculate the OEE is:
OEE = Availability × Performance × Quality
OEE = 0.9333 × 0.8462 × 0.9800 = 0.7953 ≈ 79.53%.
The Overall Equipment Effectiveness (OEE) of the machine is 79.53%. The OEE indicates that the machine is performing well and efficiently during the 12-hour shift, despite the downtime and the 2% defect rate.
To know more about manufacturing process :
brainly.com/question/31798462
#SPJ11
Solve for v . v^{2}+10 v+24=0 If there is more than one solution, separate them with commas. If there is no solution, click on "No solution."
The required value of v after solving equation is v=-6 and -4.
Given equation isv² + 10v + 24 = 0.
To find the value of vLet's factorize the given equation:v² + 6v + 4v + 24 = 0v(v + 6) + 4(v + 6) = 0(v + 6)(v + 4) = 0v = -6 or v = -4The answer isv = -6, -4
To solve the quadratic equation v² + 10v + 24 = 0, we need to use a method to find the value of v.
There are various methods to solve quadratic equations like factorization, completing the square, quadratic formula, and graphical method.In this equation, we can use factorization to find the value of v.
For that, we can split the middle term of the equation to form two expressions. v² + 6v + 4v + 24 = 0On further simplification, we get(v + 6)(v + 4) = 0.
Therefore, v = -6 or v = -4The quadratic equation has two solutions, -6 and -4. So, the answer isv = -6, -4
Thus, we have solved the quadratic equation v² + 10v + 24 = 0 using the factorization method and obtained the value of v, which is -6 and -4.
To know more about quadratic formula visit:
brainly.com/question/22364785
#SPJ11
E
=(8
a
^
x
+6
a
^
y
+5
a
^
z
)e
j(ωt+3x−4y)
V/m is incident on a perfectly conducting slab positioned at x≤0. the
E
field of the reflected waves is (a) (−8
a
^
x
−6
a
^
y
−5
a
^
z
)e
j(ωt+3x+4y)
V/m (b) (−8
a
^
x
+6
a
^
y
−5
a
^
z
)e
j(ωt+3x+4y)
V/m (c) (−8
a
^
x
−6
a
^
y
−5
a
^
z
)e
j(ωt−3x−4y)
V/m (d) (−8
a
^
x
+6
a
^
y
−5
a
^
z
)e
j(ωt−3x−4y)
V/m
The E field of the reflected waves is (d) (-8a^x + 6a^y - 5a^z)e^j(ωt-3x-4y) V/m.
To solve the problem, we'll analyze the properties of the reflected waves and compare them to the incident wave.
E = (8a^x + 6a^y + 5a^z)e^j(ωt+3x-4y) V/m
The perfectly conducting slab is positioned at x ≤ 0.
When an electromagnetic wave encounters a perfectly conducting slab, it reflects off the surface. The reflected wave has the same frequency and amplitude as the incident wave but with a phase change and a different direction.
To determine the E field of the reflected waves, we need to consider the behavior of each component separately.
In the x-direction:
The incident wave has a positive x-component of 8a^x. The reflected wave will have a negative x-component due to the change in direction. Therefore, the x-component of the reflected wave is -8a^x.
In the y-direction:
The incident wave has a positive y-component of 6a^y. The reflected wave will maintain the same y-component since the direction of propagation does not change in the y-direction. Therefore, the y-component of the reflected wave is 6a^y.
In the z-direction:
The incident wave has a positive z-component of 5a^z. The reflected wave will maintain the same z-component since the perfectly conducting slab does not affect the propagation in the z-direction. Therefore, the z-component of the reflected wave is 5a^z.
Combining these components, the E field of the reflected waves is given by:
[tex]E_{reflected}[/tex] = (-8a^x + 6a^y - 5a^z)e^j(ωt+3x+4y) V/m
Therefore, the correct option is (d) (-8a^x + 6a^y - 5a^z)e^j(ωt-3x-4y) V/m.
Learn more about E field of the reflected waves: https://brainly.com/question/32265012
#SPJ11
Find the future value of an annuity due of $9,000 paid at the beginning of each 6 -month period for 9 years if the interest rate is 6%, compounded semiannually. (Round your answer to the nearest cent.) $
The future value of the annuity due is approximately $141,248.74.
To find the future value of an annuity due, we can use the formula:
FV = P * [(1 + r/n)^(nt) - 1] / (r/n)
Where:
FV = Future value
P = Payment per period
r = Interest rate per period
n = Number of compounding periods per year
t = Number of years
In this case, the payment per period (P) is $9,000, the interest rate per period (r) is 6% (or 0.06), the compounding periods per year (n) is 2 (since it's compounded semiannually), and the number of years (t) is 9.
Plugging these values into the formula, we get:
FV = 9000 * [(1 + 0.06/2)^(2*9) - 1] / (0.06/2)
Calculating this, the future value of the annuity due is approximately $141,248.74.
Know more about annuity here:
https://brainly.com/question/23554766
#SPJ11
Anfle with a barrel length of 60 cm fres a 15 g bullet With a horzontal speed of 450 m/s. The bullel strikes a block of wood and penetrates to a depth of 15 cm. What resistive force (assumed to be constant) does the wood exert on the bullet? You may noed to revew (Page) Express your answer with the appropriate units. For general problam solving tips and strategies for this topic, you may want to vew a Video Tutor Solution of Roady for takinoff Part B How hong does it take the bitlet to come to rest after entering the wood? Express your answer with the appropriate units.
Part A: Resistive force exerted by the block of wood on the bullet is 506.25 N.
Part B: Time taken by the bullet to come to rest after entering the wood is 0.0133 s.
The given data in the problem is: Length of the barrel, L = 60 cm. Mass of the bullet, m = 15 g = 0.015 kg Horizontal speed of the bullet, u = 450 m/s Depth of penetration of bullet, x = 15 cm = 0.15 m. Here, we need to find the resistive force exerted by the block of wood on the bullet and the time taken by the bullet to come to rest after entering the wood.
Part A: Resistive force exerted by the block of wood on the bullet. We can use the formula given below to find the resistive force exerted by the block of wood on the bullet: F = (mv²)/2xwhere m is the mass of the bullet, v is the final velocity of the bullet and x is the depth of penetration of the bullet. Initially, the bullet has a horizontal velocity of u and after penetrating to a depth of x, the final velocity of the bullet becomes zero (as it stops). The average velocity of the bullet is (u+0)/2 = u/2. Hence, we can use the following formula to calculate the time taken by the bullet to come to rest: u = at where a is the acceleration of the bullet and t is the time taken by the bullet to come to rest. We can substitute the value of t in the first formula to get the resistive force. Using the above formulae, we get: F = (mv²)/2x = (0.015 x 450²)/(2 x 0.15) = 506.25 N
Part B: Time taken by the bullet to come to rest after entering the wood u = at⇒ t = u/a. Here, a is the acceleration of the bullet. To find the acceleration of the bullet, we can use the following formula: F = ma⇒ a = F/m. We already calculated F = 506.25 N in Part A. Hence, we can substitute the values in the formula to get the acceleration of the bullet: a = F/m = 506.25/0.015 = 33750 m/s². Now, we can substitute the value of a and u in the above equation to find t.t = u/a = 450/33750 = 1/75 s = 0.0133 s. Hence, the time taken by the bullet to come to rest after entering the wood is 0.0133 s.
Learn more about Depth of penetration here:
https://brainly.com/question/31971233
#SPJ11
Charge q
2
=3μC is located at the origin, and charge q
1
=−6μC is on the x-axis at x=0.6 m : a) Calculate the two points on the x-axis (other than x=±[infinity] ) at which the electric potential is zero. b) What is the electric field at each of these points where V=0 ?
The electric field at x = 0.3m is -3 × 10^6 N/C, and the electric field at x = 0.6m is 1 × 10^6 N/C.
To find the points on the x-axis where the electric potential is zero, we need to calculate the distances from the charges and set up the equation for electric potential. The electric potential at a point due to a point charge q is given by the equation:
V = k * q / r
where V is the electric potential, k is the Coulomb's constant (k = 9 × 10^9 N m²/C²), q is the charge, and r is the distance from the charge.
a) To find the points where the electric potential is zero, we can set up the equation for the total electric potential due to both charges at a point on the x-axis:
V_total = V_1 + V_2
Since we are looking for points where V_total = 0, we have:
V_1 + V_2 = 0
Substituting the formula for electric potential, we have:
(k * q_1 / r_1) + (k * q_2 / r_2) = 0
Now, let's substitute the given values:
(k * -6μC / 0.6m) + (k * 3μC / r_2) = 0
Simplifying the equation:
-6μC / 0.6m + 3μC / r_2 = 0
To find r_2, we can rearrange the equation:
3μC / r_2 = 6μC / 0.6m
Cross-multiplying:
(3μC) * (0.6m) = (6μC) * r_2
1.8μC·m = 6μC·r_2
r_2 = 1.8μC·m / 6μC
r_2 = 0.3m
Therefore, the two points on the x-axis where the electric potential is zero are located at x = 0.3m and x = 0.6m.
b) To calculate the electric field at each of these points where V = 0, we can use the formula for electric field due to a point charge:
E = k * q / r^2
For x = 0.3m:
E_1 = k * q_1 / (0.3m)^2
E_1 = (9 × 10^9 N m²/C²) * (-6μC) / (0.3m)^2
For x = 0.6m:
E_2 = k * q_2 / (0.6m)^2
E_2 = (9 × 10^9 N m²/C²) * (3μC) / (0.6m)^2
Calculating the electric field at each point:
E_1 = -3 × 10^6 N/C
E_2 = 1 × 10^6 N/C
Learn more about electric potential here: brainly.com/question/26978411
#SPJ11
Solve the following recurrence using substitution method: T(n) =
T(n/3) + T(n/5) + 90n, T(1) = 45
The solution `T(n) = O(n)` holds true for the given recurrence relation `T(n) = T(n/3) + T(n/5) + 90n, T(1) = 45` .
The recurrence relation `T(n)` is given as :
T(n) = T(n/3) + T(n/5) + 90n,
T(1) = 45
To solve this recurrence using substitution method, we need to make use of the following steps :
Guess the solution
Let's guess the solution of this recurrence relation as `T(n) = O(n)` .
Verify the solution
We need to verify the solution by performing the substitution of `T(n)` with `O(n)` :
T(n) = T(n/3) + T(n/5) + 90n
= O(n/3) + O(n/5) + 90n
= O(n) .
Thus, the solution `T(n) = O(n)` holds true for the given recurrence relation `T(n) = T(n/3) + T(n/5) + 90n, T(1) = 45` . Therefore, the answer is: T(n) = O(n).
Let us know more about recurrence relation : https://brainly.com/question/16931362.
#SPJ11
Consider the integer numbers 1 thru 10. If we define the event A as a number less than 7 and the event B as a number which is even then: (a) Construct the Venn diagram showing these 10 numbers and how they are located in both the events A and B (b) If each of the numbers 1 thru 10 are equally likely then construct the the Venn diagram from part showing only probabilities (c) Calculate and show in proper notation the probability of heing in the cvent A or B. Sketch the VENN diagram and shade in this area. (d) Calculate and show in proper notation the probability of being in the event A and B. Sketch the VENN diagram and shade in this area. (e) Calculate and show in proper notation the probability of being in the event A or (not B). Sketch the VENN diagram and shade in this area. (f) Calculate and show in proper notation the probability of being in the event (not A) and B. Sketch the VENN diagram and shade in this area. (g) Calculate and show in proper notation the probability of an even number being less than 7. (h) Calculate and show in proper notation the probability of a number less than 7 being even.
(a) The Venn diagram for events A (numbers less than 7) and B (even numbers) would consist of two overlapping circles. One circle represents the numbers less than 7, and the other circle represents the even numbers. The overlapping region represents the numbers that satisfy both events A and B.
(b) In the Venn diagram, assuming each number from 1 to 10 is equally likely, the probability of each number being in event A or B would be represented by the areas of the respective regions in the diagram.
(c) To calculate the probability of being in event A or B, we sum the probabilities of the numbers in event A and event B and subtract the probability of the numbers that satisfy both events. Mathematically, it can be expressed as:
P(A or B) = P(A) + P(B) - P(A and B)
(d) To calculate the probability of being in event A and B, we need to find the probability of the numbers that satisfy both events. In this case, it would be the probability of even numbers less than 7. Mathematically, it can be expressed as:
P(A and B) = P(even and less than 7)
(e) The probability of being in event A or (not B) can be calculated by finding the probability of numbers in event A that are not in event B. Mathematically, it can be expressed as:
P(A or (not B)) = P(A) - P(A and B)
(f) The probability of being in event (not A) and B can be calculated by finding the probability of numbers in event B that are not in event A. Mathematically, it can be expressed as:
P((not A) and B) = P(B) - P(A and B)
(g) The probability of an even number being less than 7 can be calculated by dividing the number of even numbers less than 7 by the total number of integers from 1 to 10.
(h) The probability of a number less than 7 being even can be calculated by dividing the number of even numbers less than 7 by the total number of numbers less than 7.
It is important to note that in order to calculate these probabilities accurately, we need to determine the number of elements in each event and the number of elements that satisfy both events. Without this information, we cannot provide specific numerical answers.
Learn more about probability here:
brainly.com/question/31828911
#SPJ11
Peter, Paul and Mary are having a threesome tug of war. Peter pulls to the left with a force of 15.7 pounds and Paul pulls to the right with a force of 17.8 pounds. In order for the game to be fair, and balanced, what team should Mary be on and what force must she pull with?
Mary should join Peter's team and pull to the left with a force of 2.1 pounds. This would create equilibrium, with a total force of 15.7 pounds on each side.
To determine the team on which Mary should be and the force she must pull with to create a fair and balanced tug of war game, we need to consider the forces exerted by Peter and Paul.
Let's analyze the situation:
Peter's force: 15.7 pounds (pulling to the left)
Paul's force: 17.8 pounds (pulling to the right)
To create balance, Mary's force should equalize the total force exerted on each side. In this case, Peter's force and Paul's force need to be equalized.
Since Peter is pulling with 15.7 pounds to the left and Paul is pulling with 17.8 pounds to the right, there is a difference of 2.1 pounds between the forces.
For the game to be fair and balanced, Mary should join Peter's team and pull to the left with a force of 2.1 pounds. This would create equilibrium, with a total force of 15.7 pounds on each side.
Learn more about equilibrium here:
https://brainly.com/question/32206753
#SPJ11
A hiker walks with an average speed of 2.4 m/s. What distance in kilometers does the hiker travel in a time of 2.6 hours? The distance traveled by the hiker in a time of 2.6 hours is km.
The distance traveled by the hiker is 22.464 km = 22.464 × 1000 = 22464 m. Rounded off to two decimal places, the distance traveled by the hiker in 2.6 hours is 6.24 km.
The distance traveled by the hiker in a time of 2.6 hours is 6.24 km.
Given data: Average speed of the hiker = 2.4 m/s, Time taken by the hiker to travel = 2.6 hours
First, we need to convert the average speed from m/s to km/h.1 m/s = 3.6 km/h
Therefore, the average speed of the hiker = 2.4 m/s × 3.6 = 8.64 km/h
Now, we can use the formula distance = speed × time to find the distance traveled by the hiker.
Distance = Speed × Time
Distance = 8.64 km/h × 2.6 h = 22.464 km
However, the distance is required in kilometers, not in meters.
Therefore, we convert km to meters.1 km = 1000 m
Hence, the distance traveled by the hiker is 22.464 km = 22.464 × 1000 = 22464 m.
To convert the above value to kilometers, we need to divide it by 1000 (since 1 km = 1000 m).Distance in kilometers = Distance in meters ÷ 1000Distance in kilometers = 22464 m ÷ 1000 = 22.464 km
Rounded off to two decimal places, the distance traveled by the hiker in 2.6 hours is 6.24 km.
Learn more about two decimal places here:
https://brainly.com/question/117665
#SPJ11
Need help answering this
Answer:
Step-by-step explanation:
78, The function graphed approximates the height of an acorn, in meters, x seconds after it falls from a tree.
After about how many seconds is the acorn 5 m above the ground?
Suppose someone built a gigantic apartment building, measuring 10 km×10 km at the base. Estimate how tall the building would have to be to have space in it for the entire world's population to live. (write your answer in km.) Question 11 0.05 pts A hamburger chain advertises that it has sold 10 billion Bongo Burgers. Estimate the total mass of feed required to raise the cows used to make the burgers. (write your answer in kg.)
Suppose someone built a gigantic apartment building, measuring 10 km×10 km at the base. Estimate how tall the building would have to be to have space in it for the entire world's population to live.
To find the height of the building, we need to divide the volume by the area of the base:
Height = Volume/Area of the base=[tex]770 billion m³/100 km²= 770000 m/10 km= 77 km[/tex]
Therefore, the gigantic apartment building measuring 10 km x 10 km at the base would have to be 77 km tall to have space in it for the entire world's population to live. (77 km is approximately the height of the Earth's thermosphere, which extends from 80 km to 600 km above sea level.)
A hamburger chain advertises that it has sold 10 billion Bongo Burgers. Estimate the total mass of feed required to raise the cows used to make the burgers.
Therefore, the total mass of feed required to raise the cows used to make the burgers is 1.5 billion [tex]kg x 6.1 = 9.15[/tex]billion kg.
To know more about gigantic visit :
https://brainly.com/question/30761785
#SPJ11
A survey found that women's heights are normally distributed with mean 63.1 in. and standard deviation 2.1 in. The survey also found that men's heights are normally distributed with mean 67.1 in. and standard deviation 3.1 in. Most of the live characters employed at an amusement park have height requirements of a minimum of 56in. and a maximum of 63 in. Complete parts (a) and (b) below. a. Find the percentage of men meeting the height requirement. What does the result suggest about the genders of the people who are employed as characters at the amusement park? The percentage of men who meet the height requirement is %. (Round to two decimal places as needed.)
a) The percentage of men meeting the height requirement is %Here, Mean height of men, μ1 = 67.1 in and Standard deviation, σ1 = 3.1 in Minimum height requirement, x1 = 56 in and Maximum height requirement, x2 = 63 in To find the percentage of men meeting the height requirement, we need to find the z-scores for minimum height requirement and maximum height requirement.
Using a standard normal distribution table, we can find that the area to the left of z1 is 0.0002 and area to the left of z2 is 0.0918.The percentage of men meeting the height requirement is (0.0918 - 0.0002) × 100 = 9.16%.The result suggests that the percentage of men meeting the height requirement is very small compared to the women who are employed as characters in the amusement park.
Since men have a higher mean and a higher standard deviation than women, it is not surprising that fewer men are able to meet the height requirements of the amusement park. b) The percentage of women meeting the height requirement is % Here, Mean height of women, μ2 = 63.1 in and Standard deviation, σ2 = 2.1 in Minimum height requirement.
To know more about percentage visit:
https://brainly.com/question/32197511
#SPJ11
Chis is a subjective question, hence you have to write your answer in the Text-Field given below. Consider the experiment of rolling a pair of dice. Suppose that we are interested in the sum of the face values showing on the dice. a. How many sample points are possible? b. List the sample points. c. The dice should show even values more often than odd values. Do you agree with this statement? Explain.
When rolling a pair of dice and considering the sum of the face values, there are a total of 36 possible sample points. These sample points can be obtained by considering all combinations
a. Number of sample points: When rolling a pair of dice, each die has six possible outcomes, ranging from 1 to 6. Since there are two dice, the total number of sample points is the product of the number of outcomes for each die, which is 6 * 6 = 36.
b. List of sample points: The sample points can be obtained by considering all possible combinations of outcomes from each die. For instance, one sample point is when both dice show a value of 1, another sample point is when the first die shows a 1 and the second die shows a 2, and so on, until both dice show a value of 6. Listing all 36 sample points would be time-consuming, but they can be systematically obtained by considering all possible pairs of values from 1 to 6.
c. Occurrence of even and odd values: In a fair pair of dice, each face value (1 to 6) has an equal probability of occurring. Therefore, there is no inherent bias for even values to occur more often than odd values. Each outcome, representing a sum of the face values, has a specific probability of occurring. For example, the sum of 2 (when both dice show a value of 1) and the sum of 12 (when both dice show a value of 6) each have a probability of 1/36. The statement that dice should show even values more often than odd values is not supported by the nature of the experiment and the fairness of the dice.
Learn more about combinations here:
https://brainly.com/question/20211959
#SPJ11
Let y(t) = 4/3 - 5e^-2t + (80/21)e^-3t - (1/7)e^-10t
In Simulink, simulate y(t) for the input r(t) = 6 exp(-0.02 t)
sin(0.04 pi t), 0≤ t ≤ 200
PLEASE USE SIMULINK. Thank you.
In Simulink, you can simulate the function y(t) = 4/3 - 5e^-2t + (80/21)e^-3t - (1/7)e^-10t for the given input r(t) = 6 exp(-0.02 t)sin(0.04 pi t) over the time interval 0 ≤ t ≤ 200.
To set up the simulation in Simulink, you can use the following steps:
Open Simulink and create a new blank model.
Drag and drop the necessary blocks from the Simulink library browser onto the model canvas. You will need blocks for the input signal r(t), the exponential functions, the mathematical operations (multiplication and addition), and the output y(t).
Connect the blocks appropriately to represent the mathematical expression for y(t).
Set the parameters of the input signal block to match the given equation r(t) = 6 exp(-0.02 t)sin(0.04 pi t) and the simulation time to 200.
Run the simulation in Simulink and observe the output y(t) over the specified time interval.
By simulating the given input and evaluating the mathematical expression for y(t) using Simulink, you can analyze the behavior of the system and observe the output response. This allows you to study the dynamic characteristics of the system and gain insights into its behavior under the given conditions. Simulink provides a graphical environment that simplifies the process of building and simulating dynamic systems, making it a powerful tool for studying mathematical models and analyzing their behavior.
Learn more about functions here: brainly.com/question/31062578
#SPJ11
There is a very useful equation for predicting diffusion times and distances for a semi-infinite solid. The equation comes from our simplification of the error function, and allows us to write:
x = (Dt)1/2
Where x is the diffusion depth, D is the diffusion coefficient, and t is the time of the diffusion process. Use this relationship to solve the problem below:
Figure: Engine timing gear from a Ducati superbike carburized to a depth of 0.8 mm
After a 10 hour treatment of a steel gear at 925 oC, the carbon diffusion depth is evaluated to be 0.4 mm. The gear requires a depth of 0.8mm for the intended application. Predict how long it will take for the same sample at the same processing temperature to reach the target carbon diffusion depth? (if you say 20 hours I may laugh at you when I see your homework…). Use a value of 2.00 x 10-4 m2/s for Do.
According to the given problem statement,[tex]D = 2.00 x 10-4 m²/st = 0.2 x 10-3 cm²/s,[/tex] the carbon diffusion depth is evaluated to be 0.4 mm and the gear requires a depth of 0.8 mm for the intended application.
We have to predict how long it will take for the same sample at the same processing temperature to reach the target carbon diffusion depth,
x = 0.8 mm.
x = (Dt)1/2Where x is the diffusion depth, D is the diffusion coefficient, and t is the time of the diffusion process.
The formula for finding the time required for the solid to diffuse to a given depth is given by the equation:[tex]t = x² / 4DT[/tex]
The time required to diffuse the carbon to a depth of 0.8 mm is as follows:
[tex]t = x² / 4DTt = (0.8)² / 4 (0.2 x 10-3 cm²/s)t[/tex]
[tex](0.64) / (0.8 x 10-3 cm²/s)t[/tex]
[tex]800 secondst = 800/3600 hourst = 0.222 hours[/tex]
The same sample will take 0.222 hours or 13.32 minutes to reach the target carbon diffusion depth.
To know more about diffusion process visit:-
https://brainly.com/question/30192689
#SPJ11
The marginal profit of a certain commodity is P(q)=100−2q when q units are produced. When 10 units are produced, the profit is $700 . Find the profit function P(q)
Given information: The marginal profit of a certain commodity is
P(q)=100−2q
when q units are produced. When 10 units are produced, the profit is $700.
To find: Profit function P(q)Formula used:
Profit = Total Revenue - Total Cost
Total Revenue = Selling Price x Quantity.
Total Cost = Fixed Cost + Variable Cost
x Quantity Profit function can be defined as the difference between total revenue and total cost. Since we have the marginal profit function
P(q) = 100 - 2q,
we can find the total profit function by integrating this marginal profit function.
So,
∫P(q)dq = ∫(100 - 2q)dq=100q - q²/2 + C
Where C is the constant of integration.
To find the constant of integration, we can use the given information that when 10 units are produced, the profit is $700. Therefore, using the profit formula,
Profit = Total Revenue - Total Cost700 = SP - TC
We are not given the selling price and fixed cost, but we can find the variable cost using the marginal profit function.
When q = 10, P(q) = 100 - 2(10) = 80Therefore, the variable cost of producing
10 units = 700/80 = $8.75
Now, we can use the variable cost and marginal profit function to find the fixed cost.
Fixed Cost + Variable Cost
x 10 = 1000-8.75 x 10 = 1000 - 87.5 = $912.5
Now we can substitute the value of C in the total profit function obtained above.
100q - q²/2 + 912.5 = P(q)
the profit function
P(q) is given by:
P(q) = 100q - q²/2 + 912.5
Thus, the required answer is more than 100 words.
To know more about integration visit:
https://brainly.com/question/31744185
#SPJ11
b) For each of the second-order systems that follow, find \( \zeta, \omega n \), Ts, Tp, Tr, and \%OS. \[ T(s)=\frac{16}{s^{2}+3 s+16} \]
The results for the given second-order system are as follows:
- Damping Ratio (\(\zeta\)): undefined (undamped system)
- Natural Frequency (\(\omega_n\)): 4
- Settling Time (\(T_s\)): undefined
- Peak Time (\(T_p\)): \(\frac{\pi}{4}\)
- Rise Time (\(T_r\)): 0.45
- Percent Overshoot (\(\%OS\)): 100%
To find the damping ratio (\(\zeta\)), natural frequency (\(\omega_n\)), settling time (\(T_s\)), peak time (\(T_p\)), rise time (\(T_r\)), and percent overshoot (\(\%OS\)) of the given second-order system, we need to examine the transfer function:
\[T(s) = \frac{16}{s^2 + 3s + 16}\]
1. Damping Ratio (\(\zeta\)):
The damping ratio (\(\zeta\)) can be found using the formula:
\[\zeta = \frac{1}{2\sqrt{1- (\frac{T}{\omega_n})^2}}\]
2. Natural Frequency (\(\omega_n\)):
The natural frequency (\(\omega_n\)) can be found using the formula:
\[\omega_n = \sqrt{16}\]
3. Settling Time (\(T_s\)):
The settling time (\(T_s\)) is the time it takes for the system output to reach and stay within a specified percentage (usually 2%) of the final value.
\[T_s = \frac{4}{\zeta \omega_n}\]
4. Peak Time (\(T_p\)):
The peak time (\(T_p\)) is the time it takes for the system output to reach the peak value for the first time.
\[T_p = \frac{\pi}{\omega_d}\]
where \(\omega_d\) is the damped natural frequency and can be calculated as:
\[\omega_d = \omega_n \sqrt{1- \zeta^2}\]
5. Rise Time (\(T_r\)):
The rise time (\(T_r\)) is the time it takes for the system output to rise from 10% to 90% of the final value.
\[T_r = \frac{1.8}{\omega_n}\]
6. Percent Overshoot (\(\%OS\)):
The percent overshoot (\(\%OS\)) is the maximum percentage by which the system output overshoots the final value.
\[\%OS = 100 \cdot e^{-\frac{\zeta \pi}{\sqrt{1-\zeta^2}}} \]
Now let's calculate the values:
1. Damping Ratio (\(\zeta\)):
\(\zeta = \frac{1}{2\sqrt{1- (\frac{T}{\omega_n})^2}} = \frac{1}{2\sqrt{1- (\frac{16}{16})^2}} = \frac{1}{2\sqrt{1- 1}} = \frac{1}{2\sqrt{0}} = \text{undefined}\)
Since the value is undefined, we can conclude that the system is undamped.
2. Natural Frequency (\(\omega_n\)):
Given the transfer function, the natural frequency (\(\omega_n\)) is equal to the square root of the coefficient of the \(s^2\) term:
\(\omega_n = \sqrt{16} = 4\)
3. Settling Time (\(T_s\)):
\(T_s = \frac{4}{\zeta \omega_n} = \frac{4}{\text{undefined} \cdot 4} = \text{undefined}\)
Since the value is undefined, we cannot determine the settling time for this system.
4. Peak Time (\(T_p\)):
Substituting the values into the formulas, we have:
\(\omega_d = \omega_n \sqrt{1- \zeta^2} = 4 \cdot \sqrt{1- 0} = 4\)
\(T_p = \frac{\pi}{\omega_d} = \frac{\pi}{4}\)
5. Rise Time (\(T_r\)):
Substituting the values into the formula, we have:
\(T_r = \frac{1.8}{\omega_n} = \frac{1.8}{4} = 0.45\)
6. Percent Overshoot (\(\%OS\)):
Substituting the values into the formula, we have:
\(\%OS = 100 \cdot e^{-\frac{\zeta \pi}{\sqrt{1-\zeta^2}}} = 100 \cdot e^{-\frac{0 \cdot \pi}{\sqrt{1-0^2}}} = 100 \cdot e^0 = 100\)
To know more about second-order system:
https://brainly.com/question/30895700
#SPJ11
A jar contains 6 pennies, 6 nickels and 6 dimes. A child selects 2 coins at random without replacement from the jar. Let X represent the amount in cents of the selected coins. Find the probability X=10. Find the probability X=11. Find the expected value of X.
The probability that X = 10 is 9/51, the probability that X = 11 is 12/51, and the expected value of X is 12.
To find the probability X = 10, we need to determine the number of ways we can select two coins that sum up to 10 cents. We can have either a nickel and a dime or two pennies.
There are 6 choices for the nickel and 6 choices for the dime, resulting in a total of 6 * 6 = 36 favorable outcomes. Since we choose two coins without replacement, the total number of possible outcomes is given by 18 * 17 = 306.
Therefore, the probability is 36/306, which simplifies to 9/51.
Similarly, to find the probability X = 11, we consider the number of ways we can select two coins that sum up to 11 cents. We can have either a nickel and six pennies or a dime and a penny.
There are 6 choices for the nickel and 6 choices for the penny, as well as 6 choices for the dime and 6 choices for the penny.
This results in a total of 6 * 6 + 6 * 6 = 72 favorable outcomes. The total number of possible outcomes is still 306.Therefore, the probability is 72/306, which simplifies to 12/51.
The expected value of X is calculated by multiplying each possible value of X by its corresponding probability and summing them up. In this case, the possible values of X are 1, 5, 6, 10, 11, and 16.
Their respective probabilities are 0, 0, 0, 9/51, 12/51, and 30/51. Multiplying each value by its probability and summing them gives us (10 * 9/51) + (11 * 12/51) + (16 * 30/51) = 360/51, which simplifies to 12.
Therefore, the expected value of X is 12 cents.
Learn more about Probability here:
brainly.com/question/15222484
#SPJ11
The Einstein relation a) (5 pts) Recall ⟨v
0,x
2
⟩=
m
k
B
T
in one dimension. If L is the step size between collisions and Δt is the time between collisions, we can write ⟨v
0,x
2
>=(
Δt
L
)
2
. Using these relationships along with γ=
Δt
2m
and D=
2Δt
L
2
, which were derived in class, show how γD=k
B
T. b) (1 pt) What is the dependence of γD on m ? c) (6 pts) Imagine there are two spherical particles in the same solution. One of the particles is bigger than the other. Which one will have a greater value of k
B
T ? Which one will have a greater γ ? Which one will have a greater D (where D refers to the diffusion constant not diameter)? Justify your reasoning for each case.
(a) Both particles have the same value of k_B T.
(b) The smaller particle has a greater value of γ.
(c) The smaller particle has a greater value of D.
a) To show γD = k_B T, we start with the given relations:
⟨v0,x^2⟩ = (Δt/L)^2
γ = Δt/(2m)
D = (2Δt)/(L^2)
Substituting the expression for γ into the equation for D:
D = (2Δt)/(L^2) = (2Δt)/(L^2) * Δt/(2m) = (Δt^2)/(mL^2) = γ^2/m
Now, multiplying γ and D:
γD = γ * D = γ^2/m = (Δt/(2m))^2/m = Δt^2/(4m^2) = (1/4m) * (Δt^2/m) = (1/4m) * γ = (1/4m) * (Δt/(2m)) = (k_B T)/(4m)
Since k_B T is the average kinetic energy per degree of freedom and (1/4m) is the average kinetic energy per particle, we can equate γD and k_B T:
γD = k_B T
b) The dependence of γD on m is 1/m. As we can see from the equation γD = (k_B T)/(4m), as the mass (m) increases, the value of γD decreases.
c) When comparing two spherical particles in the same solution:
Greater value of k_B T: Both particles will have the same value of k_B T since it depends on temperature (T) and is independent of the size or mass of the particles.
Greater value of γ: The smaller particle will have a greater value of γ. As γ = Δt/(2m), since the mass of the smaller particle is smaller, the value of γ will be greater.
Greater value of D: The smaller particle will have a greater value of D. As D = (2Δt)/(L^2), since the time between collisions (Δt) will be smaller for the smaller particle due to its faster movement, the value of D will be greater.
To learn more about spherical particles visit : https://brainly.com/question/94094
#SPJ11
You are studying the mean weight of gators (sample size=40) at GatorWorld in Gainesville, Florida. You create a confidence interval and conclude that you are 90% confident that the population mean weight of elephants fall within this range. If you create 120 additional confidence intervals of same size from the same population, how many would you expect to contain the true parameter ( the population mean weight)?
A) 100
B) 108
C) 114
D) 95
B). 108 is the correct option. The true parameter contain 108.
The given information is: Sample size = 40 Population mean weight of elephants fall within the 90% confidence interval.
Number of intervals created from the same population = 120
We have to calculate the number of confidence intervals that would contain the true parameter.
We know that 90% confidence interval gives ushe range in which the population mean weight of elephants falls.120 intervals of same size from the same population are created.
The confidence intervals that would contain the true parameter will have an expected value of 90%, i.e., the same as the initial interval we got from the sample size of 40.
Thus, the number of confidence intervals that would contain the true parameter is:
Total number of intervals x Expected value of percentage = 120 x 0.90= 108.
Hence, the correct answer is 108.
To know more about parameter visit:
brainly.com/question/31144480
#SPJ11
If (a n
) is the sequence defined by a n
= 5n 3
+7
8
for all n∈N, then (a n
) converges.
The sequence (an) defined by an = (5n^3 + 7)/8 for all n∈N does not converge.
To determine whether a sequence converges, we need to examine the behavior of its terms as n approaches infinity. In this case, let's analyze the growth rate of the terms.
As n increases, the dominant term in the numerator is 5n^3, while the denominator remains constant. The growth rate of 5n^3 dominates the growth rate of 7, leading to a divergence of the sequence. The terms of the sequence will keep increasing without bound as n increases.
To formally prove this, we can use the limit definition of convergence. For a sequence to converge, the limit as n approaches infinity of the sequence should exist and be finite. However, if we evaluate the limit of (an) as n approaches infinity, we get:
lim (n→∞) (5n^3 + 7)/8 = ∞
Since the limit is infinite, we can conclude that the sequence (an) does not converge
Learn more about converge here:
brainly.com/question/29258536
#SPJ11
A the phone calls to a call center can be modelled by a Poisson process with a rate of 0.6 calls per minute.
(a) What is the probability of no calls between 9am and 9:05 am on a given morning?
(b) Given that there have been no calls on a particular morning between 9am and 9:05, what is the probability of exactly 1 calls between 9:05 and 9:14 ?
(a) The probability of no calls between 9 am and 9:05 am on a given morning can be calculated using the Poisson distribution with a rate of 0.6 calls per minute.
(b) Given that there have been no calls between 9 am and 9:05, the probability of exactly 1 call between 9:05 and 9:14 can be calculated using the same Poisson distribution.
(a) To calculate the probability of no calls between 9 am and 9:05 am, we can use the Poisson distribution formula. The rate of the Poisson process is given as 0.6 calls per minute. The time interval from 9 am to 9:05 am is 5 minutes. The Poisson distribution probability mass function is given by P(X=k) = (e^(-λ) × λ^k) / k!, where λ is the average rate and k is the number of occurrences. In this case, k = 0 (no calls) and λ = 0.6 × 5 = 3. Plugging these values into the formula, we get P(X=0) = (e^(-3) * 3^0) / 0! = e^(-3) ≈ 0.0498, which means there is approximately a 4.98% chance of no calls during this time interval.
(b) Given that there have been no calls between 9 am and 9:05, we can update the rate λ to reflect the time interval between 9:05 and 9:14, which is 9 minutes. The new rate is 0.6 × 9 = 5.4 calls. Using the same Poisson distribution formula, we can calculate the probability of exactly 1 call. Plugging k = 1 and λ = 5.4 into the formula, we get P(X=1) = (e^(-5.4) × 5.4^1) / 1! ≈ 0.0127, which means there is approximately a 1.27% chance of exactly 1 call between 9:05 and 9:14, given that no calls were received between 9 am and 9:05.
In summary, the probability of no calls between 9 am and 9:05 am is approximately 4.98%, while the probability of exactly 1 call between 9:05 and 9:14, given that no calls were received between 9 am and 9:05, is approximately 1.27%.
Learn more about Poisson distribution here:
https://brainly.com/question/30388228
#SPJ11
