Answer:
Changing the concentration of one solution in the cell will increase the voltage potential of the cell because you are putting the system further out of equilibrium. Because the concentration in only one side of the cell has changed, the concentration gradient across both sides of the cell becomes steeper. In order for this experiment to work, the salt bridge must be concentrated enough to effectively separate the two electrolyte solutions, but it must also be porous enough to allow ionic flow.
Explanation:
think so you like it
WILL MARK BRAINLY IF GOOD ANSWER :)
Chlorine and oxygen are both gases at room temperature. What are some characteristic properties of chlorine that distinguish it from oxygen?
Answer:
Well one characteristic is electical energy transforms into thermal energy and gases and the state of matter(one of the distinct form i which matter exist)
Why is carbon said to provide a "backbone" in many molecules? (1 point)
Carbon atoms have long narrow shapes, allowing many other atoms to attach to them
Carbon atoms can form chains and branches with each other, and other atoms can attach to these.
Carbon atoms have full shells of electrons, allowing electrical signals to pass through them easily
Carbon atoms have half-full shells of electrons, allowing electrical signals to pass through them easily.
The correct answer is; Carbon atoms can form chains and branches with each other, and other atoms can attach to these.
Organic chemistry is regarded as the chemistry of carbon compounds and carbon atoms are known to catenate.
Organic chemistry is the branch of chemistry that studies carbon compounds. There are thousands of organic compounds in existence.
The common thread that joins all these organic compounds is that they all contain a long or branched chain of carbon atoms linked to each other. This ability of carbon atoms to self-link forming long chains or branches or macrocyclic compounds is called catenation.
The long or branched chain of carbon is therefore the "back bone" or main framework of the compound.
https://brainly.com/question/9477180
Answer:
(Question 1) Metallic bonds are responsible for many properties of metals, such as conductivity. Why is this possible?
(Answer) The bonds can shift because valence electrons are held loosely and move freely.
(Question 2) Between which types of elements do ionic bonds occur, and how do electrons act within the bond?
(Answer) metals and nonmetals, electrons transferred
(Question 3) Which kind of bond would occur between sodium (Na, Group IA) and chlorine (Cl, Group VIIA)?
(Answer) ionic
(Question 4) Why is carbon said to provide a “backbone” in many molecules?
(Answer) Carbon atoms can form chains and branches with each other, and other atoms can attach to these.
(Question 5) Which option describes the structure of the electron shells in a neutral carbon atom?
(Answer) The inner shell is complete with two electrons. The outer shell is incomplete with four electrons.
Explanation:
i just finished the quick check UwU
How much water will the measuring cup have if you poured 1/2 of it out?
Patience, a popular card game in Mendeleev's time, is also known as Go Fish.
A. True
B. False
Answer:
B. False
Explanation:
step by step explanation
Answer:
False
Explanation:
ii)The outer electronic configuration of an element is 3d8 4s2
.To which group and period it belongs?
Answer:
group ten period four. that's the answer
what do you mean by Arsenic Pollution?
Arsenic contamination of groundwater is a form of groundwater pollution which is often due to naturally occurring high concentrations of arsenic in deeper levels of groundwater.Arsenic contamination of ground water is found in many countries throughout the world, including the US.
in order to decrease the freezing point of 500. g of water to 1.00° c how many grams of ethylene glycol (C2H602)must be added (KF=1.86°C kg solvent)
Answer:
if wrong sorry ok????
3.
Melting point of four solids A, B, C and D are 299 K, 111K, 150K, 340K.their inter
particle forces of attraction are in the order:
(a) A
(b) B
(c) C
(d) B
Answer:
You have provided wrong option.
Their interparticle forces of attraction are in the order D>A>C>B
So, option (d) D should be there.
Hỗn hợp E gồm hai este đơn chức X và Y (MX< MY). Thủy phân hoàn toàn 0,11 mol E cần vừa đủ
120 ml dung dịch NaOH 1M, chưng cất dung dịch sau phản ứng, thu được ancol propylic và 8,78 gam hỗn
hợp Z gồm ba muối. Phần trăm khối lượng của Y trong E là
Answer:
write in English bro? can you?
Explanation:
I can't understand your language sorry .
Which of the following terms refers to the area immediately around the eye
Answer:
the eye socket
Explanation:
the area around the eye is called the eye socket or the eye orbit.
A mixture of three gases A, B, and C have a total pressure of 8.15 atm. The partial pressure of gas A is 2.70 atm. The partial pressure of B is 2.09 atm. What is the partial pressure of gas C?
a
2.45 atm
b
5.67 atm
c
1.35 atm
d
3.36 atm
Answer:
for this question i think the answer is 1.35 atm
solubility of sodium chloride in water at 27 degree celsius is 22.7 in hundred ml of water the density of water is 1.0 gram per ml calculate the concentration of sodium chloride in term of mass percentage when dissolved in 500 ml of water
please tell me correct answer with solution
Answer:
of what grade it is of??
Explanation:
tell me then ill answer
Name the functional group in the following molecule:
CH3CH2NH2
A. amine
B. amide
C. ether
D. thiol
Answer:
(A) Amine
Explanation:
Ch3Ch2Nh2 is an Amine.
An amine is often a functional group with a lone pair on the nitrogen atom. Amines structurally mimic ammonia, where nitrogen can link with up to three hydrogen atoms. Here the correct option is A.
Amines are organic substances that have a lone pair of nitrogen atoms in them. In essence, they are produced by replacing one or more hydrogen atoms in ammonia (NH₃) with an alkyl or aryl group, giving them the names alkylamines and arylamines, respectively.
In addition to medicines and treatments, amines are used to create nylon and azodyes. They are frequently employed in the creation of compounds for the filtration of water, and medicinal, and crop protection.
Thus the correct option is A.
To know more about amine, visit;
https://brainly.com/question/31550454
#SPJ6
The liquid is being heated.
Marion measured the volume of the liquid at the start and the end of the Marion experiment.
Do you think there was less, more or the same volume of liquid at the end as there was at the beginning?
Give a reason for your answer.
there should be less liquid at the end of the experiment since heating liquid is an endothermic process, and endothermic processes typically break the bonds between liquids. The applied heat would soon break the bonds that hold the molecules of the liquid together, and evaporation would occur once the temperature is hot enough. Thus, the evaporated water would decrease the volume of the liquid.
7. In a remote area of Columbia, kids have to travel to school on a zip-line!
Would school attendance increase if all kids has to get to school on a fun
zip line?
Make a hyphotesis
Help plz!!!
Answer:
yes
Explanation:
Kids like fun things, and school is not fun , so if kids got to go to school on a zipline, attendance would be through the roof!
A sample of gas has a volume of 20 cm³.The pressure is changed to 90 kPa at constant temperature,while the volume increases to 75 cm³.What was the original pressure of the gas?
Answer:
337.5kPa ~ 338kPa
Explanation:
Using the ideal gas law PV=nRT we have the following definitions from the problem:
V(initial) = 20cm³
P(initial) = ?kPa
V(final) = 75cm³
P(final) = 90kPa
Since we know that the number of moles of the sample did not change, nor did the temperature, nor does the ideal gas constant (R) we can rewrite this equation to state:
P(initial)V(initial) = nRT =P(final)V(final) ~ P(initial)V(initial) = P(final)V(final)
Rearranging this equation as we are solving for the initial pressure we find that:
P(initial) = (P(final)V(final))/V(initial)
P(initial) = ((90kPa)(75cm³))/20cm³
P(initial) = 337.5kPa ~ 338kPA
Which of the following is an example of the geosphere interacting with the atmosphere?Streams become muddy due to erosion.
Volcanic eruptions release gases into the air.
Rocks crack open when water in the cracks freeze.
Plants absorb carbon dioxide and produce oxygen.
Answer:
Volcanic eruptions release gases into the air.
Explanation:
This is because the atmosphere collects the gas from the volcano, the volcano is apart of the geosphere because it is a part of the earth's surfaces.
c. The element in group 2 and period 3 is -
Answer:
Magnesium
Explanation:
Hope this helps!
Are all elements atoms and are all atoms elements?
Answer:
yes
Explanation:
because is smallest element that are made up of atom
Answer: Yes
Explanation:
PLS HELP! WILL MARK BRAINLIEST!!! 50 PTS
Answer:
from the pic:
[tex]empirical \: formular : \: \: C _{2}H _{3}O _{2}[/tex]
since molar mass is 118.084 g/mol;
[tex](C _{2}H _{3}O _{2}) _{n} = 118.084 \\ C _{2n}H _{3n}O _{2n} = 118.084 \\(12 \times 2) _{n} + (1 \times 3) _{n} + (16 \times2 ) _{n} = 118.084 \\ 24_{n} + 3_{n} + 32_{n} = 118.084 \\ 59_{n} = 118.084 \\ n = 2[/tex]
[tex]{ \boxed{ \bf{molecular \: formular : \: C _{4}H _{6}O _{4}}}}[/tex]
It is an aldehyde with structure ( second pic )
Answer:
It is an aldehyde with structure
one similarity between physics and chemistry is...
Answer:
They are branch of science.
Explanation:
hope this helps
Answer:
Branch's of science yk
Explanation:
I'm smart lol
Describe how methane is
formed in terms of chemical bonding
two drops of mercury on a flat surface are rolled towards each other. When they make contact with each other they fuse to form one drop.Why?
Answer:1) It is due to large cohesive force acting between the molecules of mercury that the droplets of mercury when brought in contact pulled together to form a bigger drop in order to make potential energy minimum. The temperature of this bigger drop increases since the total surface area decreases.
2) A spherical shape has the minimum surface area to volume ratio of all geometric forms. When two drops of a liquid are brought in contact, the cohesive forces between their molecules coalesce the drops into a single larger drop. This is because, the volume of the liquid remaining the same, the surface area of the resulting single drop is less than the combined surface area of the smaller drops. The resulting decrease in surface energy is released into the environment as heat.
5. What change would increase the amount of gas able to be dissolved in a given amount of liquid water? (2 points)
Increasing temperature
a
Increasing pressure
Increasing surface area
O
Increasing rate of stirring
answer : increasing pressure
the amount of gas that can be dissolved in liquid water increase with the increase in pressure
Answer:
increasing pressure
Explanation:
Explain Froath Flotation Method!
Explanation:
a process for separating minerals from gangue by taking advantage of the differences in their hydrophobicity.
I believe that is accurate
hope this helped have a nice day
and mark me brainiest :)
what are two consents in this experiment
The number of cricket chirps
The temperature of each container
The kind of containers used
The number of crickets in each container
Answer:
the number of crickets in each container
Explanation:
to participate in the experiment you will have to know the crickets in the container
Một hỗn hợp X gồm CH3OH; C2H5OH; phenol có khối lượng 28,9 gam phản ứng vừa hết với 100ml dung dịch NaOH 2M. Phần trăm theo khối lượng phenol là ? Biết C = 12; O = 16; H = 1; Na = 23. *
Answer:
nNaOH = 0,2 mol
Trong hỗn hợp các chất đề bài cho chỉ có phenol tác dụng với NaOH
C6H5OH + NaOH → C6H5ONa + H2O
0,2 ← 0,2 (mol)
⟹ mphenol = 0,2.94 = 18,8 gam
⟹
%mC6H5OH=18,8/28,9 x100%= 65,05%
Explanation:
Which statement correctly describes the relationship between thermal energy and particle movement?
1 As thermal energy increases, particle movement does not change.
2 As thermal energy increases, it is not possible to predict particle movement.
3 As thermal energy increases, there is less particle movement.
4 As thermal energy increases, there is more particle movement.
The correct statement that describes the relationship between thermal energy and particle movement is "As thermal energy increases, there is more particle movement".
WHAT IS THERMAL ENERGY?
Thermal energy is the energy that emanates from heat or change in temperature. Thermal energy is directly proportional to the movement of particles. This means that an increase in thermal energy depicts an increase in the kinetic energy (energy due to motion) of the particles involved.Hence, as thermal energy of substance increases, there is more particle movement of that substance.
Learn more: https://brainly.com/question/24291347
What is the boiling point (in °C) of a 0.743 m aqueous solution of KCI?
Enter your rounded answer with
3 decimal places.
Question 2 Multiple Choice Worth 2 points)
(01.01 LC)
Which of the following is a characteristic of science?
O Reproducible by other scientists
The personal opinion of the scientist
Using vanable conditions for each test
O Including only the data that supports a hypothesis
Question 3 Multiple Choice Worth 2 points)
Answer:
Reproducible by other scientists
The personal opinion of the scientist
Using vanable conditions for each test
Explanation:
