If the force on a spring is 2 N and it stretched 0.5 m, what is the spring constant?
O A. 2 N/m
OB. 0.2 N/m
OC. 0.4 N/m
OD. 4 N/m

Answer:

The final translational seed at the bottom of the ramp is approximately 4.84 m/s

Explanation:

The given parameters are;

The radius of the sphere, R = 2.50 cm

The mass of the sphere, m = 4.75 kg

The translational speed at the top of the inclined plane, v = 3.00 m/s

The length of the inclined plane, l = 2.75 m

The angle at which the plane is tilted, θ = 22.0°

We have;

[tex]K_i[/tex] + [tex]U_i[/tex] = [tex]K_f[/tex] + [tex]U_f[/tex]

K = (1/2)×m×v²×(1 + I/(m·r²))

I = (2/5)·m·r²

K =  (1/2)×m×v²×(1 + 2/5) = 7/10 × m×v²

U = m·g·h

h = l×sin(θ)

h = 2.75×sin(22.0°)

∴ 7/10×4.75×3.00² + 4.75×9.81×2.75×sin(22.0°) = 7/10 × 4.75×[tex]v_f[/tex]² + 0

7/10×4.75×3.00² + 4.75×9.81×2.75×sin(22.0°) ≈ 77.93

∴ 77.93 ≈ 7/10 × 4.75×[tex]v_f[/tex]²

[tex]v_f[/tex]² = 77.93/(7/10 × 4.75)

[tex]v_f[/tex] ≈ √(77.93/(7/10 × 4.75)) ≈ 4.84

The final translational seed at the bottom of the ramp, [tex]v_f[/tex] ≈ 4.84 m/s.

Answer:

The capacity of an RD bottle is 100cc and its mass is 45g. Find the mass of the bottle when it is filled with a liquid of density 600kg/[tex]m^{3}[/tex]

EXPLANATION:

100cc=100[tex]cm^{3}[/tex]

density of liquid=600Kg/  =0.6gm/

 so mass of 100cc liquid will be m=d×V=0.6×100=60gm

So mass of bottle filled with liquid will be bottle+liquid=45gm+60gm=105gm  

Answer is 105gm.

Answer:

yes

Explanation:

because the dipoles are not arrange the same way they were in the full hacksaw

Answer:

wah wats this again

Explanation:

Bhai mujhe samaj nahi ah Raha

Kya Bolne Chahtaa hu tum

Answer:

bạn vẽ ra rồi làm

Explanation:

Answer:

68.6 m/s^2

Explanation:

1 g = 9.8 m/s^2

so

7 g × 9.8m/s^2 = 68.6

Answer:

plastics are unable to conduct electricity and heat due to there being no free flowing electrons, meaning they are safe to use.

Explanation:

Answer:

the magnitude of the momentum of the two-ball system immediately after collision is 32.31 kg.m/s

Explanation:

Given;

mass of the first ball, m₁ = 1.0 kg

mass of the second ball, m₂ = 2.0 kg

initial velocity of the first ball, v₁ = 30 m/s due west

initial velocity of the second ball, v₂ = 6 m/s due north

From the principle of conservation of linear momentum;

the total momentum before collision = total momentum after collision

The westward momentum of the first ball, = m₁v₁ = 1 x 30 = 30 kg.m/s

The northward momentum of the second ball = m₂v₂ = 2 x 6 = 12 kg.m/s

The resultant momentum of the two balls;

R² = 30² + 12²

R² = 1044

R = √1044

R = 32.31 kg.m/s

Therefore, the magnitude of the momentum of the two-ball system immediately after collision is 32.31 kg.m/s

B

Explanation:

BECAUSE IT WAS GOING UPWORD THEN IT'S VELOCITY WAS DECREASING -10MS¹

Answer:

Explanation:

From physics, which is directly related to math (especially when it comes to parabolic motion!), we learn that at the very top of the parabola the object has to stop for a millisecond so it can turn around and fall back to earth. This translates to a velocity of 0 at its highest point. So B.

Explanation:

Particles in solids are always vibrating (moving back and forth) in place.

Answer:

is it from positive to negative am I right tell me if I am wrong

Answer:

positive to negative

The flow of electric current is similar to the flow of water which is from higher level to lower level.

The electric current flow from higher potential region(positive* low concentration of electron) to lower potential region(negative*high concentration of electron)

Answer:

Jet stream would be displaced southwards causing heavy rain and flooding.

Explanation:

The other options of the question were A) Jet stream would be displaced northwards causing drought. B) Jet stream would be displaced southwards causing drought. D) Jet stream would be displaced northwards causing heavy rain and flooding,

The statement that is a likely impact of stronger than normal trade winds in the Pacific Northwest to the United States is "Jet stream would be displaced southwards causing heavy rain and flooding."

We are talking about climate or weather terminology. In this case, we are referring to the "El Niño" (the Children) effect. Its presence affects the weather in North America. This phenomenon combines with the "La Niña) effect and it presents itself every two to seven years, ad they last from 8 to 12 months, affecting the weather conditions of the region.

Answer:

jet stream should be displaced southwards which causes heavy rainfall and flood.

please mark me as brainiest p

Explanation:

Magnetic lines of force are closed curves. C) Outside the magnet their direction is from north pole to south pole and inside the magnet these are from south to north pole.

Answer: Remove your foot from the gas pedal and slow down

Explanation:

Hydroplaning also refers to aquaplaning and this refers to the scenario whereby there's a layer of water that builds between the tyres of a car and the surface of the road which then brings about a loss of traction which eventually leads to a situation whereby the car doesn't respond to control inputs.

This lack of traction with the pavement takes away your control of the vehicle and to regain control of the vehicle, one should remove your foot from the gas pedal and slow down.

Answer:

235.6m/s

Explanation:

you have to use one of the kinematic formulas the best that suits the question given in this case you can use v=u+at.since the time, acceleration and initial velocity have been given in the question

v=116+(9.2)13^2

v=116+119.6

=235.6m/s

I hope this helps

Answer:

Changes of state are physical changes in matter. They are reversible changes that do not change matter's chemical makeup or chemical properties. For example, when fog changes to water vapor, it is still water and can change back to liquid water again.

Turbine blades are rotated by the steam in the steam turbine.The water at the high temperature get converted into the steam used to rotate the turbine blades.

The property of any system on a specified point is known as the state of the system.Pressure,temperature are the properties of the system.

They are reversible modifications that do not alter the chemical composition or characteristics of matter.

The steam turbine blades are turned by the steam. The high-temperature water is turned to steam, which is utilized to rotate the turbine blades.

When fog transforms into water vapor, for example, it is still water and may transform back into liquid water.

Hence the steam turbine is the economic application of changes in states of matter.

To learn more about the state refer to the link;

https://brainly.com/question/15858706

#SPJ2

Answer:

Pascal's law says that pressure applied to an enclosed fluid will be transmitted without a change in magnitude to every point of the fluid and to the walls of the container.

Explanation:

The pressure at any point in the fluid is equal in all directions.

Explanation:

According to pascal law ,Force applied on bulk of water in a container will be distributed to all molecules of water...

Answer:

Explanation:

The form of Newton's 2nd Law that we use for this is:

F - f = ma where F is the Force pulling the mass down the ramp forward, f is the friction trying to keep it from moving forward, m is the mass and a is the acceleration (and our unknown).

We know mass and we can find f, but we don't have F. But we can solve for that by rewriting our main equation to reflect F:

[tex]wsin\theta-\mu F_n=ma[/tex] That's everything we need.

w is weight: 6.0(9.8). Filling in:

6.0(9.8)sin20 - .15(6.0)(9.8) = 6.0a and

2.0 × 10¹ - 8.8 = 6.0a and

11 = 6.0a so

a = 1.8 m/s/s

From the description of the question, the acceleration is 1.95 ms-2.

The term friction is defined a the force that seeks to prevent the movement of a surface on another.

Now we know that;

ma =mgsinθ -  ukmgcosθ

ma =( 6 * 9.8 * sin 20) - ( 0.15 * 6 * 9.8 * cos 20)

a =  ( 6 * 9.8 * sin 20) - ( 0.15 * 6 * 9.8 * cos 20) /6

a = 20 - 8.29/6

a = 1.95 ms-2

Learn more about acceleration: https://brainly.com/question/14356798

Answer:

Đáp án là vị trí để đặt q3 tại vị trí cân bằng là cách A một đoạn 0,0411 m

và nằm trong AB

Explanation:

Do q1 và q2 trái dấu nên q3 nằm trong

gọi r1 là vị trí từ A đến q3 suy ra r2=0.08-r1

Vị trí cân bằng nên [tex]\frac{q1}{r1^{2} }[/tex] = [tex]\frac{q2}{(0.08-r1)^{2} }[/tex]

Answer:

what do u need help with

Explanation:

Calculate the escape velocity for the spacecraft. [G= 6.67×10^-11Nm^2kg^-2, mass of the Earth= 5.97×10^24kg, radius of the Earth= ...

Answer:

Diameter of wire = 0.00021 meters

Explanation:

Given the following data;

Number of windings = 30

Length of windings = 6.3 mm to meters = 0.0063 meters

To find the diameter of the wire, we would use this mathematical expression;

Length of windings = number of windings * diameter of wire

Substituting the values into the expression, we have;

0.0063 = 30 * diameter of wire

Diameter of wire = 0.0063/30

Diameter of wire = 0.00021 meters

Answer:

m1=100kg

m2=6×10^24kg

r=6400km

G=6.6×10^-11

F=?

as we know that

F=G m1.m2/r²

F=6.6×10^-11×100×6×10^24/(6400)²

F=6.6×10^-11×6×10^26/4.096×10^7

F=6.6×10^-11×1.465×10^19

F=9.67×10^8N

Answer: There are multiple options:

By varying the supply voltage.

By varying the flux, and by varying the current through the field winding.

By varying the armature voltage, and by varying the armature resistance.

Helpful Link:

https://www.elprocus.com/what-are-the-best-ways-to-control-the-speed-of-dc-motor/

Answer:

a. 5 batteries b. 1050 mAh

Explanation:

Here is the complete question

A student project is required to be portable and hand held. It requires 6 V DC power at a current of 150 mA. The batteries for the power supply must last for a minimum of 7 hours of continuous operation. NiMH rechargeable batteries in AA size are to be used. A) How many batteries are needed? B) What mAh capacity should the batteries have?

Solution

A) How many batteries are needed?

Since the nominal voltage for a single NiMH battery is 1.2 V per battery and we require 6V DC power, we combine the batteries in series to obtain a total voltage of 6 V. The number of batteries required, n = total voltage/voltage per cell = 6V/1.2V per battery = 5 batteries

So, the number of batteries needed is 5.

B) What mAh capacity should the batteries have?

Since the batteries are in series, they would each deliver a current of 150 mA. Since we require a current of 150 mA for 7 hours, the number of milliampere-hours capacity mAh of batteries required is Q = It where I = current = 150 mA and t = time = 7 hours.

So, Q = It = 150 mA × 7 h = 1050 mAh.

So, the batteries should have a mAh of 1050 mAh

Answer:

A lemon squeezer is a small kitchen utensil designed to extract juice from lemons or other citrus fruit such as oranges, grapefruit, or lime. It is designed to separate and crush the pulp of the fruit in a way that is easy to operate.

Answer:

A lemon squeezer is a small kitchen utensil designed to extract juice from lemons or other citrus fruit such as oranges, grapefruit, or lime. It is designed to separate and crush the pulp of the fruit in a way that is easy to operate.

Explanation:

stay safe

Answer:

Average speed = 0.35 m/s

Explanation:

Given the following data;

Distance = 1.3 Km

Time = 62 minutes

To find the average speed in m/s;

First of all, we would convert the quantities to their standard unit (S.I) of measurement;

Conversion:

1.3 kilometres to meters = 1.3 * 1000 = 1300 meters

For time;

1 minute = 60 seconds

62 minutes = X

Cross-multiplying, we have;

X = 62 * 60

X = 3720 seconds

Now, we can calculate the average speed in m/s using the formula;

[tex] Speed = \frac {distance}{time} [/tex]

[tex] Speed = \frac {1300}{3720} [/tex]

Average speed = 0.35 m/s

The pascal is the SI derived unit of pressure used to quantify internal pressure, stress, Young's modulus and ultimate tensile strength.

Answer:

0.48N

Explanation:

according to the second law of motion

force=mass×acceleration

the mass in this question is 0.025,the acceleration 19

therefore f=0.025×19

=0.48N

I hope this helps

Answer:

2 m/s^2

Explanation:

a = ∆v / ∆t

a = (50 - 30) / 10

a = 20 / 10

a = 2 m/s^2

acceleration = u-v/t

50-30/10

=2m/s