This type of motion is called uniform motion or constant velocity motion.
If the cart is rolling along a flat surface without any external forces acting on it (such as friction or air resistance), the velocity graph would look different. In this case, the velocity of the cart would remain constant over time, resulting in a straight horizontal line on the velocity graph. This type of motion is called uniform motion or constant velocity motion. It occurs when an object moves in a straight line with a constant speed and direction. In the absence of any external forces, the object's velocity remains unchanged, resulting in a flat and horizontal velocity graph.
To know more about uniform motion
brainly.com/question/479512
#SPJ11
A spherical, concave, shaving mirror has a radius of curvature of 32.1 cm. Part A What is the magnification of a person's face when it is 12.1 cm to the left of the vertex of the mirror? Where is the image? Express your answer in centimeters.
The magnification of a person's face when positioned 12.1 cm to the left of the vertex of a spherical, concave shaving mirror with a radius of curvature of 32.1 cm is -1. The image is formed at a distance of 12.1 cm to the left of the vertex of the mirror, and it is real, inverted, and the same size as the object.
A spherical, concave, shaving mirror with a radius of curvature of 32.1 cm is considered in the following question. In Part A, we need to determine the magnification of a person's face when it is positioned 12.1 cm to the left of the vertex of the mirror and also find the location of the image. The magnification formula is expressed as: [tex]\frac{h_0}{h_i} = - \frac{d_o}{d_i}[/tex]. Here, h₀ represents the height of the object, hᵢ refers to the height of the image, d₀ represents the distance between the object and the mirror, and dᵢ represents the distance between the image and the mirror. The negative sign in the formula pertains to real images, with the magnification being positive for a real image and negative for a virtual image.
Given the following values:
Radius of curvature, R = -32.1 cm (negative since it is a concave mirror)
Object distance, d₀ = -12.1 cm (negative as the object is on the left side of the mirror)
Image distance, dᵢ = ?
Using the rearranged equation:
[tex]d_i = - \frac{d_o * h_i}{h_0}[/tex]
Since the height of the object, h₀, is equal to the height of the image, hᵢ (as it is a person's face), we can substitute this value into the equation:
[tex]d_i = -d_o[/tex]
[tex]d_i = - (-12.1) = 12.1 cm[/tex]
Therefore, the image is formed at a distance of 12.1 cm to the left of the vertex of the mirror.
The magnification of the person's face is given by:
[tex]M = -\frac{h_i}{h_0}[/tex]
Since the height of the object, h₀, is equal to the height of the image, hᵢ (as it is a person's face), we can substitute this value into the equation:
[tex]M = -\frac{h_i}{h_0} = -1[/tex]
Thus, the magnification of a person's face is -1, indicating that the image is real, inverted, and the same size.
In conclusion, the final image distance is 12.1 cm to the left of the vertex of the mirror.
To know more about vertex visit:
https://brainly.com/question/32432204
#SPJ11
Vector
A
has magnitude 160 m and vector
B
has magnitude 16.0 m. The scalar product
A
⋅
B
is 108 m
2
What is the magnitude of the vector product between these fwo vectors? Express your answer with the appropriate units.
The magnitude of the vector product between vectors A and B is approximately 2550.56 m².
The magnitude of the vector product (also known as the cross product) between two vectors can be calculated using the formula:
|A x B| = |A| * |B| * sin(θ)
where |A| and |B| are the magnitudes of vectors A and B, and θ is the angle between the two vectors.
Given that the scalar product A ⋅ B is 108 m², we can use the relationship between the scalar product and the angle between the vectors:
A ⋅ B = |A| * |B| * cos(θ)
From this, we can solve for cos(θ):
cos(θ) = (A ⋅ B) / (|A| * |B|) = 108 / (160 * 16) = 0.0421875
Now, we can calculate sin(θ):
sin(θ) = sqrt(1 - cos²(θ)) = sqrt(1 - 0.0421875^2) ≈ 0.9991
Finally, we can calculate the magnitude of the vector product:
|A x B| = |A| * |B| * sin(θ) = 160 * 16 * 0.9991 ≈ 2550.56 m²
Learn more about vector products at https://brainly.com/question/32764673
#SPJ11
A cubical piece of heat-shield-tile from the space shuttle measures 0.12 m on a side and has a thermal conductivity of 0.065 J/(s⋅m⋅C
∘
). The outer surface of the tile is heated to a temperature of 1110
∘
C, while the inner surface is maintained at a temperature of 24
∘
C. (a) How much heat flows from the outer to the inner surface of the tile in 6.0 minutes? (b) If this amount of heat were transferred to 2.4 liters (2.4 kg) of liquid water, by how many Celsius degrees would the temperature of the water rise?
First of all, let us determine the temperature difference, ΔT = 1110 − 24 = 1086 ∘C. Now we can use the expression for heat conduction, Q = κAdT/dt. In this expression, κ is the thermal conductivity, A is the area of the surface through which heat flows, and dT/dt is the rate of temperature change.
a) First of all, let us determine the temperature difference, ΔT = 1110 − 24 = 1086 ∘C. Now we can use the expression for heat conduction, Q = κAdT/dt. In this expression, κ is the thermal conductivity, A is the area of the surface through which heat flows, and dT/dt is the rate of temperature change. Here, we have A = 0.12 × 0.12 = 0.0144 m2. The rate of temperature change is dT/dt = ΔT/t = (1086 ∘C)/(360 s) = 3.0167 ∘C/s.
Therefore, Q = κAdT/dt = (0.065 J/(s⋅m⋅C)) × 0.0144 m2 × (3.0167 ∘C/s) = 0.0285 J/s = 1.71 J/min. Multiplying this result by 6.0 min, we get the total heat flow as Q = 10.26 J.
b) The amount of heat Q required to raise the temperature of a mass m of water by ΔT is given by Q = cmΔT, where c is the specific heat of water, which is 4.18 J/(g⋅C), and m is the mass of water in grams. Since 2.4 L of water has a mass of 2.4 kg = 2400 g, the amount of heat required to raise its temperature by ΔT is Q = cmΔT = (4.18 J/(g⋅C)) × (2400 g) × ΔT = 10,032 JΔT. Since we know that Q = 10.26 J, we can find the temperature rise by solving for ΔT, giving ΔT = Q/(cm) = (10.26 J)/(4.18 J/(g⋅C) × 2400 g) = 0.0013 C. Therefore, the temperature of the water would rise by 0.0013 C.
To know more about thermal conductivity visit:
https://brainly.com/question/14553214
#SPJ11
Two particles are fixed to an x axis: particle 1 of charge −6.10×10−7 C is at the origin and particle 2 of charge +6.10×10−7 C is at x2 = 12.5 cm. Midway between the particles, what is the magnitude of the net electric field? Number Units
The magnitude of the net electric field at the point midway between two particles with equal but opposite charges is zero, indicating a balanced electric field due to the cancellation of the individual electric fields.
To find the magnitude of the net electric field at a point midway between two charged particles, we can use the formula for the electric field due to a point charge:
E = k * |q| / r^2
where E is the electric field, k is Coulomb's constant (8.99 x 10^9 N m^2/C^2), |q| is the magnitude of the charge, and r is the distance from the charge.
In this case, both particles have the same magnitude of charge, |q| = 6.10 x 10^-7 C, and the distance from each particle to the point midway between them is the same, r = 12.5 cm = 0.125 m.
Calculating the electric field due to each particle and then summing them to find the net electric field:
E1 = k * |q| / r^2 = (8.99 x 10^9 N m^2/C^2) * (6.10 x 10^-7 C) / (0.125 m)^2
E1 ≈ 2.20 x 10^5 N/C
E2 = k * |q| / r^2 = (8.99 x 10^9 N m^2/C^2) * (6.10 x 10^-7 C) / (0.125 m)^2
E2 ≈ 2.20 x 10^5 N/C
Since the charges have opposite signs, the electric fields have opposite directions. Therefore, the net electric field is the vector sum of E1 and E2:
|E_net| = |E1 - E2| = |2.20 x 10^5 N/C - 2.20 x 10^5 N/C|
|E_net| = 0 N/C
The magnitude of the net electric field at the point midway between the particles is 0 N/C.
To learn more about electric field, click here: https://brainly.com/question/11482745
#SPJ11
A simple pendulum with a length of 1.4 m is started in motion with an initial displacement from equilibrium of 0.055 rad and an initial angular velocity of 0.035 rad/s. If the displacement is subsequently described by the function: theta=cos(+phi) θ = A cos ( ω t + ϕ ) and g is 9.81ms-2 what is the value of phi ϕ in the range − − π to + + π ?
The value of phi (ϕ) in the range of −π to +π is -1.628 rad.
As we know, the equation of motion of a simple pendulum can be given by:
θ = A cos(ωt + ϕ)
where, θ = angular displacement of the pendulum
A = amplitude of the pendulum
ω = angular frequency of the pendulum
t = time elapsed since the pendulum was set in motion
ϕ = phase constant
Given, Length of the pendulum = 1.4 m
Displacement from equilibrium = 0.055 rad
Initial angular velocity = 0.035 rad/s
Acceleration due to gravity, g = 9.81 m/s²
We know that the angular frequency of a simple pendulum can be calculated as:
ω = √(g/L)
where, L = length of the pendulum
ω = √(9.81/1.4)
ω = 3.072 rad/s
Now, the equation of motion of the simple pendulum can be rewritten as:
θ = A cos(3.072t + ϕ)
Given,θ = cos(+ϕ)
At t = 0, θ = cos(ϕ)
Therefore, we have,
A cos(ϕ) = cos(ϕ)
⇒ A = 1
At t = 0, θ = cos(ϕ)
Given, θ = 0.055 rad
cos(ϕ) = 0.055
ϕ = cos⁻¹(0.055)
ϕ = 1.514 rad
= 1.514 - 2π = -1.628 rad
Hence, the value of phi (ϕ) in the range of −π to +π is -1.628 rad.
Learn more about simple pendulum: https://brainly.com/question/12494569
#SPJ11
block of mass m1=18.0 kg is connected to a block of mass m2=36.0 kg by a massless string that passes over a light, frictionless pulley. The 36.0−kg block is connected to a spring that has negligible mass and a force constant of k=200 N/m as shown in the figure below. The spring is unstretched when the system is as shown in the figure, and the incline is frictionless. The 18.0−kg block is pulled a distance h=22.0 cm down the incline of angle θ=40.0∘ and released from rest. Find the speed of each block when the spring is again unstretched. vm1=vm2=m/sm/s
To find the speed of each block when the spring is again unstretched, we can analyze the conservation of mechanical energy in the system.
As the 18.0 kg block moves down the incline, it gains gravitational potential energy, which is converted into kinetic energy. This kinetic energy is then transferred to the 36.0 kg block through the string and pulley, which causes it to move upward.
The gravitational potential energy gained by the 18.0 kg block can be calculated using the formula: ΔPE = m1 * g * h, where m1 is the mass of the block (18.0 kg), g is the acceleration due to gravity (approximately 9.8 m/s²), and h is the vertical distance it moves (22.0 cm or 0.22 m).
ΔPE = 18.0 kg * 9.8 m/s² * 0.22 m = 37.752 J
Since the system is conservative and there is no energy loss due to friction, the gravitational potential energy gained is equal to the elastic potential energy stored in the spring when it is again unstretched.
The elastic potential energy can be calculated using the formula: PE = (1/2) * k * x^2, where k is the force constant of the spring (200 N/m) and x is the displacement of the spring from its equilibrium position.
Setting the two energies equal and solving for x:
37.752 J = (1/2) * 200 N/m * x^2
x^2 = (2 * 37.752 J) / (200 N/m)
x^2 = 0.37752 m²
x ≈ 0.614 m
Now, we can calculate the speed of each block when the spring is again unstretched.
The speed of the 18.0 kg block can be calculated using the equation: v = √(2 * g * h * sinθ), where θ is the angle of the incline (40.0 degrees).
v1 = √(2 * 9.8 m/s² * 0.22 m * sin(40.0°)) ≈ 1.732 m/s
The speed of the 36.0 kg block can be calculated using the equation: v = (m1 * v1) / m2.
v2 = (18.0 kg * 1.732 m/s) / 36.0 kg ≈ 0.869 m/s
Therefore, when the spring is again unstretched, the speed of the 18.0 kg block is approximately 1.732 m/s, and the speed of the 36.0 kg block is approximately 0.869 m/s.
To know more about mechanical energy, please visit
https://brainly.com/question/29509191
#SPJ11
1. A beam of light travels from a vacuum (c=3.00×10 8m/s) into a substance at an angle of 45∘,with a frequency of 6.00×10 14Hz and a speed of 2.13×10 8m/s. The index of refraction of the substance is a) 0.707 c) 1.50 b) 1.41 d) indeterminable, but <1 e) indeterminable, but >1 2. You observe diffraction in a ripple tank (Figure 1). To increase the diffraction of the waves in the region beyond the barrier, you consider the following adjustments: a) 0.707 c) 1.50 b) 1.41 d) indeterminable, but <1 e) indeterminable, but >1 The best adjustments or combinations of adjustments is a) (i) only d) (i) and (iii) only b) (ii) only e) (i), (ii) and (iii) c) (iii) only
The extent of diffraction depends on the wavelength of the wave and the size of the obstacle or opening. The narrower the opening, the greater the diffraction. The figure shows a ripple tank with a barrier in the center.
1. The formula for the index of refraction (n) is given by:
n = c/v
where c is the speed of light in a vacuum and
v is the speed of light in the substance.
Here, the beam of light travels at a frequency of [tex]6.00 × 10^14[/tex] Hz and at an angle of 45° from a vacuum (where c = 3.00 ×[tex]10^8[/tex]m/s) to a substance where it travels at a speed of 2.13 × 1[tex]0^8[/tex] m/s.
Therefore, we can calculate the index of refraction of the substance as follows:
v = (c/n)
Therefore,
[tex]n = c/v = c/(c/2.13 × 10^8) = 2.13.[/tex]
Thus, the index of refraction of the substance is greater than 1 and indeterminable but > 1.
Hence, the correct option is (e) indeterminable, but >1.
2. Diffraction occurs when waves bend around an obstacle or pass through a narrow opening. To increase diffraction in the region beyond the barrier, the best adjustments or combination of adjustments would be to:
(i) Use a single slit instead of double slits (the narrower the opening, the greater the diffraction).
(ii) Use a longer wavelength (longer wavelengths diffract more than shorter wavelengths).
(iii) Increase the width of the slit (the wider the opening, the less the diffraction).
The best adjustments or combinations of adjustments would be to use (i) and (iii) only, which means the correct option is (d) (i) and (iii) only.
To know more about refraction visit:
https://brainly.com/question/14760207
#SPJ11
A mass of 6x10-9 kg carries a charge of 40 µC and its velocity is 100 m/s which is perpendicular to magnetic field. The radius of the circular motion is 0.03 m. Calculate the magnitude of the magnetic field?
The magnitude of the magnetic field is 7.071 T, if a mass of 6 * 10^-9 kg carries a charge of 40 µC and its velocity is 100 m/s perpendicular to magnetic field, and the radius of the circular motion is 0.03 m.
The magnitude of the magnetic field can be calculated using the following formula:
B = (mv)/(qr)
where:
B is the magnitude of the magnetic field
m is the mass of the particle
v is the velocity of the particle
q is the charge of the particle
r is the radius of the circular motion
In this case, the mass of the particle is 6 * 10^-9 kg, the velocity of the particle is 100 m/s, the charge of the particle is 40 µC, and the radius of the circular motion is 0.03 m. So, the magnitude of the magnetic field is:
B = (mv)/(qr) = (6 * 10^-9 * 100)/(40 * 10^-6 * 0.03)
B = 7.071 T
To learn more about magnetic field: https://brainly.com/question/19542022
#SPJ11
A point charge q
0
that has a charge of 0.700μC is at the origin. A second particle q that has a charge of 2.00μC and a mass of 0.0800 g is placed at x=0.800 m. 1) What is the potential energy of this system of charges? (Express your answer to three significant figures.) mJ 2) If the particle with charge q is released from rest, what will its speed be when it reaches x=2.00 m? (Express your answer to three significant figures.) m/s
1) The potential energy of the system of charges is approximately 1.75 mJ.
2) The speed of the particle with charge q, when it reaches x = 2.00 m, is approximately 15.7 m/s.
To solve this problem, we need to calculate the potential energy of the system of charges and then determine the speed of the particle with charge q when it reaches a distance of x = 2.00 m.
1) The potential energy of the system of charges can be calculated using the formula:
U = k * |q1 * q2| / r
where U is the potential energy, k is the Coulomb's constant (k = 8.99 x 10^9 N m^2/C^2), q1 and q2 are the charges of the particles, and r is the distance between the charges.
q1 = 0.700 μC = 0.700 x 10^(-6) C, q2 = 2.00 μC = 2.00 x 10^(-6) C, r = 0.800 m
Substituting the values into the formula, we get:
U = (8.99 x 10^9 N m^2/C^2) * |(0.700 x 10^(-6) C) * (2.00 x 10^(-6) C)| / 0.800 m
Calculating this expression, we find:
U ≈ 1.75 mJ
2) To determine the speed of the particle with charge q when it reaches x = 2.00 m, we can use the principle of conservation of mechanical energy. The initial potential energy of the system is equal to the final kinetic energy of the particle.
Initial potential energy = Final kinetic energy
U = (1/2) * m * v^2
where m is the mass of the particle and v is its speed.
m = 0.0800 g = 0.0800 x 10^(-3) kg, U = 1.75 mJ
Substituting the values into the equation, we can solve for v:
1.75 x 10^(-3) J = (1/2) * (0.0800 x 10^(-3) kg) * v^2
Simplifying and solving for v, we find:
v ≈ 15.7 m/s
Learn more about the speed at https://brainly.com/question/13943409
#SPJ11
Briefly, but informatively, discuss about the sources of ground
water contamination.
Preventing groundwater contamination requires implementing proper waste management practices, adhering to regulations, and promoting sustainable agricultural and industrial practices.
Groundwater contamination occurs when harmful substances enter the underground water reservoirs known as aquifers. These contaminants can originate from various sources, both natural and human-related. Here are some of the common sources of groundwater contamination:
Agricultural Activities: The use of fertilizers, pesticides, and herbicides in agricultural practices can contribute to groundwater contamination. When these chemicals are applied to crops, they can seep into the soil and eventually reach the groundwater. Animal waste from livestock operations can also contaminate groundwater if not managed properly.
Underground Storage Tanks: Improperly maintained or leaking underground storage tanks (USTs) used for storing petroleum products, such as gasoline or diesel, pose a significant risk to groundwater. Over time, the tanks can corrode or develop leaks, allowing the contaminants to seep into the surrounding soil and infiltrate the groundwater.
Septic Systems: Improperly designed, installed, or maintained septic systems can contaminate groundwater. If the septic tank and drain field do not function effectively, untreated sewage can leach into the soil and contaminate the underlying groundwater.
Mining Activities: Mining operations, particularly those involving metals or coal, can release pollutants into the groundwater. Acid mine drainage, which occurs when sulfide minerals are exposed to air and water, can generate highly acidic water that contaminates the surrounding groundwater.
Natural Sources: Certain natural geological formations can contribute to groundwater contamination. For example, naturally occurring arsenic, radon, or uranium present in rocks and soils can dissolve into groundwater, rendering it unsafe for consumption.
Preventing groundwater contamination requires implementing proper waste management
To learn more about agricultural
https://brainly.com/question/14533586
#SPJ11
Please answer the given problem with solution. Please express
your final answer in 3 decimal places. I need the answer asap.
Thank you very much..
The 231.58 N block reaches a velocity of 13.25 m/s in 47 m starting from rest due to a 128 N force. Compute the coefficient of friction between the block and the floor.
The coefficient of friction between the block and the floor is approximately 0.552.
To solve for the coefficient of friction between the block and the floor, we can use the equation:
frictional force = coefficient of friction * normal force.
First, let's calculate the normal force acting on the block. The normal force is equal to the weight of the block, which can be calculated using the formula:
weight = mass * acceleration due to gravity.
Given that the mass of the block is 231.58 N (which is equivalent to approximately 23.658 kg) and the acceleration due to gravity is approximately 9.8 m/s^2, we can calculate the weight:
weight = 23.658 kg * 9.8 m/s^2
= 231.58 N.
Next, we need to calculate the net force acting on the block. The net force is equal to the applied force minus the frictional force. In this case, the applied force is 128 N.
net force = applied force - frictional force.
The net force is also equal to mass times acceleration:
net force = mass * acceleration.
We can rearrange this equation to solve for acceleration:
acceleration = net force / mass.
Plugging in the given values:
acceleration = 128 N / 23.658 kg ≈ 5.414 m/s^2.
Now, we can calculate the frictional force using the equation:
frictional force = mass * acceleration.
frictional force = 23.658 kg * 5.414 m/s^2 ≈ 128 N.
Finally, we can substitute the values into the first equation to solve for the coefficient of friction:
128 N = coefficient of friction * 231.58 N.
Coefficient of friction = 128 N / 231.58 N ≈ 0.552 (rounded to 3 decimal places).
To learn more about friction
https://brainly.com/question/24338873
#SPJ11
A high jumper leaves the ground with a resultant velocity of 4.0 m/s at an angle of 35° from the right horizontal from an initial vertical center of mass position of 1.37m. Draw a picture of the projectile motion to help define phases.
1.What was her vertical velocity at takeoff?
2.What was the horizontal position of her center of mass at the top of the jump?
3.What was the vertical position of her center of mass at the top of the jump?
The high jumper's vertical velocity at takeoff was 3.14 m/s. The horizontal position of her center of mass at the top of the jump was 5.39 m. The vertical position of her center of mass at the top of the jump was 3.68 m.
To find the vertical velocity at takeoff, we need to determine the vertical component of the resultant velocity. We can use trigonometry to calculate it. Given that the resultant velocity is 4.0 m/s and the angle from the right horizontal is 35°, we can find the vertical velocity using the equation: vertical velocity = resultant velocity * sin(angle). Therefore, the vertical velocity at takeoff is 4.0 m/s * sin(35°) = 3.14 m/s.
To determine the horizontal position of the center of mass at the top of the jump, we need to consider the horizontal displacement. Since there is no horizontal acceleration during the jump, the horizontal displacement can be calculated using the equation: horizontal displacement = horizontal velocity * time. Since the time of flight is the same for the upward and downward motion, we can focus on the upward motion. The initial horizontal velocity is given as 4.0 m/s. Therefore, the horizontal position of the center of mass at the top of the jump is 4.0 m/s * time.
The vertical position of the center of mass at the top of the jump can be found by considering the initial vertical position and the vertical displacement. The vertical displacement is equal to the maximum height reached during the jump. The initial vertical position is given as 1.37 m. Therefore, the vertical position of the center of mass at the top of the jump is 1.37 m + vertical displacement.
Learn more about center of mass here:
https://brainly.com/question/33321454
#SPJ11
The ink drops have a mass m=1.00×10
−11
kg each and leave the nozzle and travel horizontally toward the paper at velocity v=16.0 m/s. The drops In an inkjet printer, letters and images are created by squirting pass through a charging unit that gives each drop a positive chame q by causing it to lose some electrons. The drops then pass between parallel drops of ink horizontally at a sheat of paper from a rapidly dellecting plates of length D
11
=2.25 cm, where there is a uniform vertical electric field with magnitude E=7.70×10
4
N/C. (Eigure 1) moving nozzie. The pattern on the paper is controled by an whether ink is squirted onto the paper or not. - Part A If a drop is to be deflected a distance d=0.250 mm by the time it reaches the end of the deflection plate, what magnitude of charge q must be given to the drop? Assume that the density ai the ink drop is 1000 kg/ml
3
, and ignore the effects of gravity. Express your answer numerically in coulombs.
The required magnitude of the charge q is 7.383 × 10⁻¹¹ C.
m = 1.00 × 10⁻¹¹ kg
v = 16.0 m/s
D = 2.25 cm = 2.25 × 10⁻² m
E = 7.70 × 10⁴ N/C
d = 0.250 mm = 0.250 × 10⁻³ m
ρ = 1000 kg/m³
We can calculate the magnitude of the charge using the following equation of electric force:
F = qE
Here,
q = F
Equation of force is given as:
F = (1/2)mv²
Where,
m = mass of the ink drop = 1.00 × 10⁻¹¹ kg
v = velocity of the ink drop = 16.0 m/s
Putting these values in the above equation:
F = (1/2)mv²= (1/2) × (1.00 × 10⁻¹¹) × (16.0)²= 1.28 × 10⁻¹⁰ N
Next, we calculate the electric field between the deflection plates.
Electric field can be calculated as:
E = V/d
where,
V = potential difference between the plates
d = distance between the plates
d = 2.25 × 10⁻² mV/d = E
So,
V = Ed= (7.70 × 10⁴) × (2.25 × 10⁻²)= 1.7325 V
Now, we calculate the force acting on the ink drop, which is given as:
F = qV
Where,
q = charge on the ink drop
V = potential difference between the plates
F = (1.28 × 10⁻¹⁰) N= q
V= q × 1.7325 V
Therefore,
q = F/V= (1.28 × 10⁻¹⁰) / (1.7325)= 7.383 × 10⁻¹¹ C
So, the required magnitude of the charge q is 7.383 × 10⁻¹¹ C.
learn more about Electric field:
https://brainly.com/question/19878202
#SPJ11
If you travel 11 meters in the first 2 seconds, and then traveled 16 meters in the next 1 seconds, what was your average speed?
To find the average speed of an object, you need to divide the total distance traveled by the time it took to travel that distance. Since the distance traveled and time taken are given, the average speed can be easily calculated.
Given, Distance traveled in the first 2 seconds = 11 meters Distance traveled in the next 1 second = 16 meters Total distance traveled = Distance traveled in the first 2 seconds + Distance traveled in the next 1 second= 11 meters + 16 meters= 27 meters
Total time taken = Time taken in the first 2 seconds + Time taken in the next 1 second= 2 seconds + 1 second= 3 seconds Average speed = Total distance traveled ÷ Total time taken= 27 meters ÷ 3 seconds= 9 meters per second Hence, the average speed of the object is 9 meters per second.
To know more about average speed visit:-
https://brainly.com/question/13318003
#SPJ11
a) What is the electric field strength at r = 17.0 cm ?
b) What is the electric flux through a 34.0-cm-diameter spherical surface that is concentric with the charge distribution?
c) How much charge is inside this 34.0-cm-diameter spherical surface?A spherically symmetric charge distribution produces the electric field
E
=(5900r
2
)
r
^
N/C, where r is in m.
The value of electric field strength at r = 17.0 cm is 1003 N/C, the electric flux through a 34.0-cm-diameter spherical surface that is concentric with the charge distribution is 930 N.m, and the charge inside this 34.0-cm-diameter spherical surface is 8.22 × [tex]10^-9[/tex] C.
a) Electric field strength:The expression for electric field is given as follows:
E = 5900[tex]r^2[/tex]/r N/CGiven, r = 17.0 cm = 0.17 m
Thus, the electric field strength E at r = 17.0 cm is as follows:E = 5900 × 0.17^2 /0.17= 5900 × 0.17= 1003 N/C
b) Electric flux:Electric flux is given as ΦE = ∫E⋅dA where dA is the area element in direction perpendicular to the surface.
Area of spherical surface is given as follows:A = πr^2where r is the radius of the spherical surface.
Given, diameter of the spherical surface = 34.0 cm = 0.34 m
∴ Radius of the spherical surface = r = 0.17 m
Thus, the area of the spherical surface isA = π (0.17)^2= 0.091 sq. m
Now, the electric flux through the spherical surface can be calculated as follows:ΦE = ∫E⋅dA = E∫dA = EA= (5900 × 0.17^2/0.17) × 0.091= 930 N.m
c) Charge enclosed:We know that electric flux through the surface of a sphere containing a charge q is given by:ΦE = q / ε0 where ε0 is the electric constant (permittivity of free space).
So, the charge enclosed by the sphere is given by:q = ΦE × ε0
Thus, the charge enclosed by the 34.0-cm-diameter spherical surface is:q = ΦE × ε0= (930) × (8.85 × [tex]10^-12[/tex])= 8.22 × [tex]10^-9[/tex] C (approx)
Therefore, the value of electric field strength at r = 17.0 cm is 1003 N/C, the electric flux through a 34.0-cm-diameter spherical surface that is concentric with the charge distribution is 930 N.m, and the charge inside this 34.0-cm-diameter spherical surface is 8.22 × [tex]10^-9[/tex] C.
Learn more about electric field here ;
https://brainly.com/question/11482745
#SPJ11
josh slams on the brakes to let a stray cat cross his path unharmed. which way will his vehicle's weight move and why? it will move forward due to inertia. it will move to the right due to gravity. it will move backward due to inertia. it will stay in place.
When Josh slams on the brakes to let a stray cat cross his path unharmed, his vehicle's weight will move forward due to inertia.
Inertia is the tendency of an object to resist changes in its state of motion. When Josh applies the brakes abruptly, the vehicle experiences a rapid deceleration. According to Newton's first law of motion, an object in motion will remain in motion in the same direction and with the same speed unless acted upon by an external force. Therefore, the vehicle's weight, which is the force due to gravity acting on the vehicle's mass, will continue to move forward even though the vehicle is decelerating. This is because there is no horizontal force acting to counteract the forward motion caused by inertia.
It is important to note that while the vehicle's weight moves forward due to inertia, the actual physical movement of the vehicle may depend on other forces such as friction between the tires and the road, air resistance, and the effectiveness of the braking system.
To learn more about horizontal force
https://brainly.com/question/29179279
#SPJ11
Before working this problem, review Conceptual Example 14. A pellet gun is fired straight downward from the edge of a cliff that is 26.2 m above the ground. The pellet strikes the ground with a speed of 34.5 m/s. How far above the cliff edge would the pellet have gone had the gun been fired straight upward?
The pellet gun were fired straight upward, the pellet would have gone approximately 61.67 meters above the cliff edge.
To solve this problem, we can use the principle of conservation of mechanical energy. The initial kinetic energy of the pellet when it is fired straight downward will be equal to the potential energy it gains as it moves upward.
Given:
Height of the cliff (above the ground) = 26.2 m
Final speed of the pellet when it strikes the ground = 34.5 m/s
When the pellet is fired straight downward, its initial kinetic energy is given by:
KE_down = 1/2 * m * v_down^2
Where m is the mass of the pellet and v_down is its downward velocity.
When the pellet reaches its highest point when fired straight upward, its potential energy is equal to the initial kinetic energy when fired downward:
PE_up = KE_down
The potential energy can be calculated using the height above the cliff edge (h) and the acceleration due to gravity (g):
PE_up = m * g * h
Equating the potential energy to the initial kinetic energy:
m * g * h = 1/2 * m * v_down^2
Mass (m) cancels out:
g * h = 1/2 * v_down^2
Now, we can solve for the height above the cliff edge (h):
h = (1/2 * v_down^2) / g
Substituting the given values:
v_down = 34.5 m/s (final speed when it strikes the ground)
g = 9.8 m/s^2 (acceleration due to gravity)
h = (1/2 * (34.5 m/s)^2) / 9.8 m/s^2
h ≈ 61.67 m
Therefore, if the pellet gun were fired straight upward, the pellet would have gone approximately 61.67 meters above the cliff edge.
To learn more about, kinetic energy, click here, https://brainly.com/question/999862
#SPJ11
How do we think the first generation of stars would have been different from stars born today?
They would have all been very low in mass.
They would have generated energy through fission rather than fusion.
They would have shined only with ultraviolet light, not visible light.
They would have lacked elements heavier than hydrogen and helium.
Stars born today generate energy through fusion, whereas the first generation of stars generated energy through fission. The first generation of stars would have shone only with ultraviolet light, not visible light due to their high temperature.
The first generation of stars would have been different from stars born today in that they would have lacked elements heavier than hydrogen and helium. That is, there would have been no heavier metals or elements than hydrogen and helium. This is because heavier elements are created through the process of nuclear fusion which occurs in the cores of stars, but the first generation of stars were too small to generate the necessary temperature and pressure required for this process to take place.
Learn more about ultraviolet light from this link:
https://brainly.com/question/23342892
#SPJ11
if the diving board is 3.50M above the water, what is the driver speed just before she enters the water?
When a diver jumps from a diving board into the water, the amount of force, gravitational potential energy, and speed of the diver are significant in determining the accuracy of the dive. The diving board's height, which is 3.50M above the water, is the gravitational potential energy of the diver.
The formula for calculating the velocity of a diver just before entering the water is given by the formula below. VF = √(2gH) where VF is the velocity of the diver just before entering the water, g is acceleration due to gravity which is 9.8m/s², and H is the height of the diving board or the gravitational potential energy of the diver.
According to the formula above, we can now calculate the driver speed just before she enters the water. VF = √(2gH) = √(2 x 9.8 x 3.50) = √68.6 VF ≈ 8.28 m/s or 30 km/h
Just before the diver enters the water, her speed will be about 8.28 meters per second or 30 kilometers per hour.
To know more about acceleration visit:
https://brainly.com/question/2303856
#SPJ11
spherical capacitor is made of a solid conducting sphere of radius 30 cm, and a conducting spherical shell of inner radius 60 cm and outer radius 70 cm, concentric with the sphere. The capacitor is charged by a 50 V battery (not shown). Please answer each of the following questions. a) What is the capacitance in pF ? b) What is the charge on the inner sphere in nC ? c) What is the energy stored in nJ ?
In a conducting spherical shell of inner radius 60 cm and outer radius 70 cm, concentric with the sphere. The capacitance is 1.118 μF. The charge is 5.59 × 10⁻⁵ nC. The energy stored is 1.3975 × 10⁻⁷ nJ.
a) To find the capacitance of the spherical capacitor:
The capacitance (C) of a spherical capacitor can be calculated using the formula:
C = 4πε₀ * (r₁ * r₂) / (r₂ - r₁)
where ε₀ is the vacuum permittivity, r₁ is the radius of the inner sphere, and r₂ is the radius of the outer shell.
Given:
Radius of the inner sphere (r₁) = 30 cm = 0.3 m
Inner radius of the outer shell (r₂) = 60 cm = 0.6 m
Outer radius of the outer shell = 70 cm = 0.7 m
ε₀ = 8.854 × 10⁻¹² F/m (vacuum permittivity)
Substituting the values into the formula:
C = 4π * 8.854 × 10⁻¹² F/m * (0.3 m * 0.6 m) / (0.6 m - 0.3 m)
C ≈ 1.118 × 10⁻¹² F
Converting to picofarads (pF):
C ≈ 1.118 × 10⁻⁶ pF
Therefore, the capacitance of the spherical capacitor is approximately 1.118 μF or 1.118 × 10⁻⁶ pF.
b) To find the charge on the inner sphere:
The charge (Q) on the inner sphere can be calculated using the formula:
Q = C * V
where C is the capacitance and V is the voltage.
Given:
Capacitance (C) ≈ 1.118 × 10⁻⁶ pF (from part a)
Voltage (V) = 50 V
Substituting the values into the formula:
Q = 1.118 × 10⁻⁶ pF * 50 V
Q ≈ 5.59 × 10⁻⁵ pC
Converting to nanocoulombs (nC):
Q ≈ 5.59 × 10⁻⁵ nC
Therefore, the charge on the inner sphere is approximately 5.59 × 10⁻⁵ nC.
c) To find the energy stored in the capacitor:
The energy (U) stored in a capacitor can be calculated using the formula:
U = (1/2) * C * V²
where C is the capacitance and V is the voltage.
Given:
Capacitance (C) ≈ 1.118 × 10⁻⁶ pF (from part a)
Voltage (V) = 50 V
Substituting the values into the formula:
U = (1/2) * 1.118 × 10⁻⁶ pF * (50 V)²
U ≈ 1.3975 × 10⁻⁷ pJ
Converting to nanojoules (nJ):
U ≈ 1.3975 × 10⁻⁷ nJ
Therefore, the energy stored in the capacitor is approximately 1.3975 × 10⁻⁷ nJ.
Learn more about Capacitance here:
https://brainly.com/question/30529897
#SPJ11
Isentropic nozzle flow obeys the following equation: dA A = V (M² - 1) In a supersonic diffuser, which of the following statements is true. dA > 0, M > 1, dV < 0 dA < 0, M > 1, dV > 0 dA < 0, M < 1, dV > 0 dA < 0, M > 1, dV < 0
The correct statement is: dA > 0, M > 1, dV < 0. This signifies that in a supersonic diffuser, the area increases, the Mach number is greater than 1, and the velocity decreases.
In a supersonic diffuser, the flow undergoes expansion, which means the cross-sectional area A increases.
The equation dA/A = V(M^2 - 1) describes the change in area (dA) in relation to the area (A), velocity (V), and Mach number (M).
Given that the flow is supersonic, meaning the Mach number M is greater than 1, we can analyze the possible scenarios based on the equation:
dA > 0, M > 1, dV < 0:
This statement implies that the area increases (dA > 0), the Mach number is greater than 1 (M > 1), and the velocity decreases (dV < 0).
This aligns with the expansion process in a supersonic diffuser, where the flow area increases and velocity decreases.
dA < 0, M > 1, dV > 0:
This statement suggests that the area decreases (dA < 0), the Mach number is greater than 1 (M > 1), and the velocity increases (dV > 0).
However, in a supersonic diffuser, the flow undergoes expansion, so the area should increase rather than decrease.
dA < 0, M < 1, dV > 0:
This statement implies that the area decreases (dA < 0), the Mach number is less than 1 (M < 1), and the velocity increases (dV > 0).
However, in a supersonic diffuser, the Mach number is greater than 1, indicating supersonic flow, so this statement contradicts the conditions of a supersonic diffuser.
dA < 0, M > 1, dV < 0:
This statement suggests that the area decreases (dA < 0), the Mach number is greater than 1 (M > 1), and the velocity decreases (dV < 0).
This scenario is not applicable to a supersonic diffuser since it involves a decrease in both the area and velocity, which contradicts the expansion process.
Therefore, the correct statement is: dA > 0, M > 1, dV < 0. This signifies that in a supersonic diffuser, the area increases, the Mach number is greater than 1, and the velocity decreases.
Learn more about velocity from the given link:
https://brainly.com/question/30559316
#SPJ11
Find the Normal force and the acceleration experienced by a block of 8 kg being pushed by a force of 15 N at an angle of 30
∘
with the floor.
The normal force acting on the block is 78.4 N, and the acceleration experienced by the block is 1.875 m/s². Given that the mass of the block, m = 8 kg, force acting on the block, F = 15 N and angle made by the force with the floor, θ = 30°.The normal force (N) acting on the block can be calculated as follows:We know that the block is on a horizontal surface, and there are no vertical forces acting on the block other than the normal force.
Thus, the net vertical force acting on the block is zero.By applying Newton's Second Law in the vertical direction, we can calculate the normal force as follows:N - mg = 0where m is the mass of the block, and g is the acceleration due to gravity.Substituting the values, we get,N - (8 kg) × (9.8 m/s²) = 0N = 78.4 NTherefore, the normal force acting on the block is 78.4 N.
The acceleration (a) experienced by the block can be calculated using Newton's Second Law as follows:F - f = ma Where f is the force of friction acting on the block. We can assume that the block is sliding on a frictionless surface, in which case f = 0.Substituting the values, we get15 N - 0 = (8 kg) × a15 N = 8 kg × aThus,a = 15 N / 8 kga = 1.875 m/s²Therefore, the acceleration experienced by the block is 1.875 m/s².
To know more about acceleration visit:-
https://brainly.com/question/12550364
#SPJ11
speed untit the brokes are applied, stopping the vehide in a undorm manner in an asd tionat' 5.00 s : (a) How long is the self-driving car in motien (in s)? (b) What is the average velocity of the selfidriving car for the mokion described? (f iter the maghitude in m/s.) π/s
To determine the duration of the self-driving car's motion, we need the time it takes for the car to come to a complete stop. You mentioned that the brakes are applied, stopping the vehicle in 5.00 seconds.
If we assume this time represents the duration of the car's motion, then the car was in motion for 5.00 seconds.
The average velocity of an object is calculated by dividing the total displacement by the total time taken. However, in order to determine the average velocity, we need additional information such as the initial speed, acceleration, and any other relevant details about the car's motion. To calculate the average velocity (b), we need the displacement of the car and the total time taken. The displacement is the change in position from the initial point to the final point. Without the values for displacement and time, we cannot calculate the average velocity.
Without the specific values for these parameters, it is not possible to provide an accurate calculation or an answer in magnitude (m/s) or in relation to π/s (pi per second).
To learn more about motion
https://brainly.com/question/26083484
#SPJ11
A train approaches a mountain at a speed of 16.0 m/s. The train engineer sounds a whistle that emits a frequency of 244 Hz. What will be the sound frequency (in Hz) that the engineer hears reflected off the mountain? ( speed of sound =340 m/s)
a.
700
b.
897
c.
354
d.
149
e.
268
The sound frequency that the engineer hears reflected off the mountain will be lower than the original frequency due to the Doppler effect. The correct answer is (c) 354 Hz.
The Doppler effect is the change in frequency of a wave perceived by an observer when the source of the wave is in motion relative to the observer. When the source of the sound (train whistle) is moving towards the observer (engineer), the perceived frequency is higher than the actual frequency. Conversely, when the source is moving away from the observer, the perceived frequency is lower than the actual frequency.
In this case, as the train approaches the mountain, the sound waves emitted by the whistle are compressed, resulting in a higher frequency. However, when these waves are reflected off the mountain and reach the engineer, they are stretched, leading to a lower frequency.
To calculate the reflected frequency, we can use the formula for the Doppler effect:
f' = f * (v + v_observer) / (v - v_source)
where f is the original frequency, v is the speed of sound, v_observer is the velocity of the observer (which is zero in this case), and v_source is the velocity of the source (train).
Plugging in the values, we have:
f' = 244 * (340 + 0) / (340 + 16) ≈ 354 Hz
Therefore, the sound frequency that the engineer hears reflected off the mountain is approximately 354 Hz.
Learn more about Doppler effect here:
https://brainly.com/question/28106478
#SPJ11
iring a tennis match, a player serves the ball at 23.1 m/s, with the center of the ball leaving the racquet horizontally 2.55 m above urt surface. The net is 12.0 m away and 0.900 m high. When the ball reaches the net, (a) what is the distance between the center ball and the top of the net? (b) Suppose that, instead, the ball is served as before but now it leaves the racquet at 5.00
∘
below the rizontal. When the ball reaches the net, what now is the distance between the center of the ball and the top of the neter a sitive number if the ball clears the net. If the ball does not clear the net, your answer should be a negative number. Use g=9.81 m/ Number Units Number Units Textbook and Media Hint GOTutorial
(a) The distance between the center of the ball and the top of the net is 0.900 m. (b) Additional information is needed to calculate the distance between the center of the ball and the top of the net.
(a) To find the distance between the center of the ball and the top of the net when the ball reaches the net, we need to calculate the horizontal distance traveled by the ball and subtract it from the height of the net.
The horizontal distance traveled by the ball is the distance between the player and the net, which is 12.0 m.
The height of the net is given as 0.900 m.
Therefore, the distance between the center of the ball and the top of the net is 0.900 m.
(b) When the ball is served at 5.00° below the horizontal, it will have a downward component of velocity. To determine if the ball clears the net, we need to calculate the vertical distance traveled by the ball and compare it to the height of the net.
Using the given values and considering the acceleration due to gravity (g = 9.81 m/s²), we can calculate the time it takes for the ball to reach the net. Then, we can find the vertical distance traveled by the ball and subtract it from the height of the net.
If the result is positive, it means the ball clears the net. If the result is negative, it means the ball does not clear the net.
To know more about velocity, click here:
brainly.com/question/30559316
#SPJ11
4. A car has an initial velocity of v
o
and slows to v
f
while moving in a straight line, covering a distance of x. Derive an expression for the time it would take to do so, under the assumption that v
o
>v
f
. 5. Derive an expression for the final velocity of an object under constant acceleration in terms of the initial velocity, acceleration, and displacement. 6. Suppose a projectile is supersonic at a speed of 500 m/s. The sound of its firing travels at 343 m/s. How much sooner does the projectile reach its target 250 meters away than the sound? 7. You see a strike of lightning and hear the crack of thunder 8.3 seconds later. How far away was the lightning? Assume the time it took the light to reach you is negligible and that the speed of sound is 343 m/s.
Based on the data given, (4) Time taken to slow down to final velocity is given by t = (v0-vf)/a ; (5) final velocity of an object, v = sqrt(u2+ 2as) ; (6) the projectile reaches its target 0.229 seconds sooner than the sound ; (7) the lightning was approximately 2846.9 meters away.
4. Expression for time taken to slow down to final velocity using the given terms : v = u + at
Here, u = v0 , v = vf, a = acceleration and t = time
vf = v0 - at
=> t = (v0- vf )/a
Time taken to slow down to final velocity is given by t = (v0-vf)/a
5. Expression for the final velocity of an object under constant acceleration in terms of the initial velocity, acceleration, and displacement
Here, u = initial velocity, v = final velocity, a = acceleration and s = displacement
v2= u2+ 2as
=> v2 = u2+ 2as
=> v = sqrt(u2+ 2as)
6. Given, speed of the projectile = 500 m/s and speed of sound = 343 m/s
Time taken for the projectile to reach its target = 250/500 = 0.5 seconds
Time taken for the sound to reach you = 250/343 = 0.729 seconds
Therefore, the projectile reaches its target 0.229 seconds sooner than the sound.
7. Given, time taken to hear the sound = 8.3 seconds
Speed of sound = 343 m/s
Using the formula, distance = speed × time
Distance to lightning = 343 × 8.3 = 2846.9 meters
Therefore, the lightning was approximately 2846.9 meters away.
Thus, the correct answers are : (4) t = (v0-vf)/a ; (5) v = sqrt(u2+ 2as) ; (6) 0.229 seconds sooner than the sound ; (7) 2846.9 meters away
To learn more about projectile :
https://brainly.com/question/8104921
#SPJ11
QUESTION 3 [12] Water is pumped through a 60 m long pipe with a diameter of 0,3 m from a lower reservoir to a higher reservoir whose surface is 10 m above the lower one. The sum of the minor loss coefficients for the system is KL = 14,5. When the pump adds 40 kW to the water the flowrate is = 0,20 m³/s. Draw a sketch to demonstrate the scenario and determine the pipe roughness.
The pipe roughness is 0.01.
Sketch of the scenario:
Determination of pipe roughness:
The Darcy-Weisbach formula is used to determine the pipe's roughness. The Darcy-Weisbach formula is as follows:
Δp = f × (L/D) × (V²/2g)
The Reynolds number (Re) of a fluid is used to determine the relative roughness of a pipe. The relative roughness of the pipe (ɛ/D) can be calculated by dividing the absolute roughness (ɛ) by the pipe's diameter (D).
For smooth pipes, the relative roughness is approximately 0.00001. A rough pipe has a relative roughness of 0.01 or greater. Therefore, the relative roughness value will be determined using the Reynolds number (Re).
For a turbulent flow, the Reynolds number (Re) is given as:
Re = (ρ × V × D)/μ
Where,
ρ = Density of water = 1000 kg/m³
V = Velocity of water = 0.2 m/s
D = Diameter of the pipe = 0.3 m
μ = Dynamic viscosity of water = 0.001 kg/m-s
On substituting the given values,
Re = (1000 × 0.2 × 0.3)/0.001
Re = 6 × 10^5
Since the Reynolds number (Re) is greater than 4000, the flow in the pipe is turbulent. Let us assume that the relative roughness of the pipe is 0.01. The friction factor (f) can be determined using the Moody chart.
Using the Moody chart, the friction factor (f) is found to be 0.027.
Using the Darcy-Weisbach formula,
Δp = f × (L/D) × (V²/2g)
On substituting the given values,
Δp = 0.027 × (60/0.3) × (0.2²/2 × 9.81)
Δp = 26.45 kPa
Learn more about Reynolds number:
https://brainly.com/question/31821320
#SPJ11
A point in SHM (Simple harmonic motion) has an acceleration of 4.26 m/s
2
at a distance 0.48 mm from the origin. Note: Please return your results up to the 4th decimal point e.g 3.2344 given the sensitivity of results in the problem After analysis of the defined SHM, the period of oscillations is T
p
= and The frequency is f= Hz Assuming that the Amplitude of motion is 0.528 mm with an intitial phase of
6
π
rad develop the applicable equation of motion x=x
max
cos(ωt+ϕ
o
) and calculate the position of the point at at the initial instant t
o
=0s:x(t
o
)=mm and then calculate: The time Δt required for a point in SHM to move from the center of motion to the Amplitude is of the Period of motion. (1) Therefore the it is for this motion that Δt/6sec after passing the center point of the SHM, x=x
max
/6 (1) To prove your statement, the problem informtion suggestes that: x(
6
Δt
)=x( s)= mm which demonstrates that x(
6
Δt
) is to
6
x
max
= mm The magnitude of the speed at the the centre = m/s
The magnitude of the speed at the center of a point simple harmonic motion (SHM) is 15.6691 m/s.
Simple harmonic motion (SHM) refers to a type of periodic motion where the restoring force is directly proportional to the displacement and is always directed towards the equilibrium position. The applicable equation of motion is
x=xmaxcos(ωt+ϕo).
Acceleration of a point in SHM = a = -ω2x
Distance of the point from the origin = x = 0.48 mm
Therefore, a = -ω2x = 4.26 m/s2-ω2x = a = -4.26 m/s2ω2 = 4.26/0.48 = 8.875
Therefore, ω = 2πf = √ω2 = 2π√8.875 = 29.665 rad/s
Period of oscillations = Tp = 2π/ω = 0.2122 sFrequency = f = 1/Tp = 4.7065 Hz
Amplitude of motion = xmax = 0.528 mmInitial phase = ϕo = 6π/π = 6 rad
Position of the point at t = 0s: x(t = 0s) = xmaxcos(ωt+ϕo) = 0.528cos(29.665 × 0 + 6) = -0.2284 mm
The time Δt required for a point in SHM to move from the center of motion to the amplitude of motion is of the period of motion. The distance of the point from the origin at the center of motion is given by: x = 0 mm, and the distance of the point from the origin at the amplitude of motion is given by: x = 0.528 mm.
From the applicable equation of motion: x = xmaxcos(ωt+ϕo), the time required to move from the center of motion to the amplitude of motion is given by:
cos(ωt+ϕo) = x/xmaxcos(ωt+ϕo) = cos^-1(x/xmax)ωt+ϕo = cos^-1(x/xmax)ωt = cos^-1(x/xmax) - ϕoωt = cos^-1(0.528/0.528) - 6ωt = -6
Therefore, the time required to move from the center of motion to the amplitude of motion is Δt = Tp/4 = 0.0531 s.At Δt/6 sec after passing the center point of the SHM: x = xmax/6 = 0.528/6 = 0.088 mm
The magnitude of the speed at the center of motion is given by: v = ωxmax = 29.665 × 0.528 = 15.6691 m/s
Therefore, the magnitude of the speed at the center is 15.6691 m/s.
Learn more about magnitude at: https://brainly.com/question/30337362
#SPJ11
A submerged alligator starts swimming toward a pair of ducks dozing on a large pond, at 5.0m away from the shore. The alligator accelerates from rest, from the shore line, at a constant 0.5m/s2 . The alarmed ducks start swimming frantically away from the alligator. The equations of motions of the ducks are x1=5.0m+(1.1m/s)t and x2=5.0m-(0.4m/s)t.
Question 1: Based on this information, after how many seconds will the gator meet duck 2? Type your answer in the box provided below.
Question 2 :Build a single graph showing the motion of the three heroes of this story. Employ graph paper, if possible. Annotate the three plots (curves) to show which is which. Based on these plots, which of the ducks will the alligator catch first? Justify your answer with words and calculations. Attach your written solution.
After 2.236 seconds the alligator will meet the duck, it will take 4.5454 seconds for the alligator to catch duck 1.
Question 1: The equation of motion for the alligator can be calculated using the formula of motion which is given by,S = ut + (1/2)at²where,S = 5.0m (since alligator is starting from 5.0 m away from the shore)u = 0 (since the alligator starts from rest)t = time takena = 0.5m/s²Substituting the given values in the above equation,5.0 = 0t + (1/2)(0.5)t²2t² = 10t² = 5t = √5 = 2.236 sSo, after 2.236 seconds the alligator will meet duck.
2.Question 2: Here is the graph that shows the motion of the three characters:In this graph, the blue line represents the motion of duck 1, the green line represents the motion of duck 2, and the red line represents the motion of the alligator.Using the graph, it is clear that the alligator will catch duck 1 first. This is because the red line intersects the blue line before it intersects the green line. The time taken to catch duck 1 can be calculated as follows:x1 = 5.0m + (1.1m/s)t Substituting the value of x1 = 0 (since the alligator catches duck 1),0 = 5.0m + (1.1m/s)t-5.0m = (1.1m/s)t-4.5454 s = tSo, it will take 4.5454 seconds for the alligator to catch duck 1.
learn more about Motions-
https://brainly.com/question/25951773?utm_source=android&utm_medium=share&utm_campaign=question
#SPJ11
Three point charges are arranged along the x-axis. Charge q1 = +3.10 µC is at the origin and charge q2 = -4.20 µC is at x = +0.200 m. Charge q3 = -7.00 µC. Where is q3 located if the net force on q1 is 7.00 N in the -x direction?
To determine the location of q3, we can use Coulomb's law and the principle of superposition to find the net force acting on q1 due to the other two charges. The net force on q1 can be calculated as:
F_net = F_1 + F_2 + F_3
where F_1 is the force between q1 and q2, F_2 is the force between q1 and q3, and F_3 is the force between q2 and q3.
The force between two charges can be calculated using Coulomb's law:
F = (k * |q1 * q2|) / r^2
where F is the force, k is the electrostatic constant, q1 and q2 are the charges, and r is the distance between the charges.
Given the charges and their locations, we can calculate the net force on q1:
F_net = [(k * |q1 * q2|) / r_12^2] + [(k * |q1 * q3|) / r_13^2]
where r_12 is the distance between q1 and q2, and r_13 is the distance between q1 and q3.
Given:
q1 = +3.10 µC
q2 = -4.20 µC
q3 = -7.00 µC
r_12 = +0.200 m (since q2 is at x = +0.200 m)
F_net = -7.00 N (in the -x direction)
We can solve for r_13:
-7.00 N = [(k * |(+3.10 µC) * (-4.20 µC)|) / (0.200 m)^2] + [(k * |(+3.10 µC) * (-7.00 µC)|) / r_13^2]
Solving this equation will give us the value of r_13, which represents the distance between q1 and q3.
to know more about superposition visit:
brainly.com/question/14425078
#SPJ11
