Answer:
杰杰伊杜杜杜伊格富尔杰迪耶赫分离福音
Explanation:
莱德利 · 赫耶尔伊 3uritievrirjrirhruebwkwieheoo2hfjcbvi3hd
Answer:
B velocity
Explanation:
If a negatively charged particle is placed inside a uniform electric field the electric force that will act on that particle points in what direction in reference to the electric field lines?
Answer:
opposite direction
Explanation:
An electric field is defined as a physical field which surrounds the electrically charged particles that exerts force on the other particles on the field.
Now when an electron or a negatively charged particle enters a uniform electric field, the electric forces acts on the negatively charged particles and it forces the particle to move in the direction which is opposite to the direction of the field. In an uniform electric field, the field lines are parallel.
Answer:
Explanation:
negatively charged particle is placed inside uniform electric field
The force on the charge due to the electric field is
F = q E
when the charge is negative so the force on the charge is opposite to the direction of electric field.
The electric field is opposite to the force.
Which one of the following physical quantities has its S.I. unit m/s?
(i) Acceleration
(ii) Velocity
(iii) Force
(iv) Density
Answer:
velocity is the answer of this question.
Answer:
Velocity is the right answer ok
state any 3 properties of an ideal gas as assumed by the kinetic theory.
Answer:
The simplest kinetic model is based on the assumptions that: (1) the gas is composed of a large number of identical molecules moving in random directions, separated by distances that are large compared with their size; (2) the molecules undergo perfectly elastic collisions (no energy loss) with each other and with the walls of the container, but otherwise do not interact; and (3) the transfer of kinetic energy between molecules is heat.
A generator uses a coil that has 270 turns and a 0.48-T magnetic field. The frequency of this generator is 60.0 Hz, and its emf has an rms value of 120 V. Assuming that each turn of the coil is a square (an approximation), determine the length of the wire from which the coil is made.
Answer:
The total length of wire is 0.24 m.
Explanation:
Number of turns, N = 270
magnetic field, B = 0.48 T
frequency, f = 60 Hz
rms value of emf = 120 V
maximum value of emf, Vo = 1.414 x 120 = 169.68 V
let the area of square is A and the side is L.
The maximum emf is given by
Vo = N B A w
169.68 = 270 x 0.48 x A x 2 x 3.14 x 60
A = 3.5 x 10^-3 m^2
So,
L = 0.0589 m
Total length of wire, P = 4 L = 4 x 0.0589 = 0.24 m
If Light is travels from air into pure water with an incident angle of 30°. What is the angle of refraction?
Explanation:
For air, n1 = 1.00003; for water, n2 = 1.3330
Given: θ2 = 30 degrees, then
θ1 = arcsin [(n2/n1) sin θ2]
= arcsin [(1.3330/1.0003) sin (40)]
= 58.93 degrees
Note that since, in this example, light is traveling from a medium of higher density (water; n2 = 1.3330) to a medium of lower density (air; n1 = 1.0003), then n2 > n1, and the angle of refraction (θ1) is larger than the angle of incidence (θ2), thus the light bends away from the normal (in this example, the vertical) as it leaves the water and enters the air.
Describing Uses ñ Olivia wants to find out whether a substance will fluoresce. She says she should put it in a microwave oven. Do you agree with her? Why or why not?
Determine the magnitude as well as direction of the electric field at point A, shown in the above figure. Given the value of k = 8.99 × 1012N/C.
Answer:
Electric field at A = 9.28 x 10¹² N/C
Explanation:
Given:
K = 8.99 x 10¹² N/C
Missing information:
Length = 11 cm = 11 x 10⁻² m
q = 12.5 C
Find:
Electric field at A
Computation:
Electric field = Kq / r²
Electric field at A = [(8.99 x 10¹²)(12.5)] / [11 x 10⁻²]²
Electric field at A = 9.28 x 10¹² N/C
A car can go from 0 to 60 m/s in 5 seconds. What is the acceleration?
A) 50 m/s^2
B) 6 m/s^2
C) 12 m/s^2
D) 300 m/s^2
I think it’s 12 because I did the difference divided by 5 but some places said there was no acceleration
Answer:
12
Explanation:
i agree the answer is 12 because the acceleration is given by the difference in the velocity divided by the time taken
a=v-u/t
60-0/5
=12m/s²
I hope this helps
Sunlight above the Earth's atmosphere has an intensity of 1.36 kW/m2. If this is reflected straight back from a mirror that has only a small recoil, the light's momentum is exactly reversed, giving the mirror twice the incident momentum. (a) Calculate the force per square meter of mirror (in N/m2). N/m2 (b) Very low mass mirrors can be constructed in the near weightlessness of space, and attached to a spaceship to sail it. Once done, the average mass per square meter of the spaceship is 0.170 kg. Find the acceleration (in m/s2) of the spaceship if all other forces are balanced. m/s2 (c) How fast (in m/s) is it moving 24 hours later
Answer:
a) [tex]F=9.2*10^{-6}N/m^2[/tex]
b) [tex]a=5.4*10^{-4}m/s[/tex]
c) [tex]v=46.65m/s[/tex]
Explanation:
From the question we are told that:
Intensity I= 1.36 kW/m2=>1360W/m
b)Average mass per square meter m = 0.170 kg
c) [tex]T=24hrs[/tex]
a)
Generally the equation for force per square meter is mathematically given by
[tex]F=\frac{2E}{C}[/tex]
[tex]F=\frac{2*1360}{3*10^8}[/tex]
[tex]F=9.2*10^{-6}N/m^2[/tex]
b)
Generally the equation for force is mathematically given by
F=ma
Therefore
[tex]a=\frac{F}{m}[/tex]
[tex]a=\frac{9.2*10^{-6}N/m^2}{0.0170}[/tex]
[tex]a=5.4*10^{-4}m/s[/tex]
c)
Generally the Newton's equation for Motion is mathematically given by
[tex]v=u+at[/tex]
[tex]v=0+5.4*10^{-4}m/s*(24*3600)[/tex]
[tex]v=46.65m/s[/tex]
A battery charges a parallel-plate capacitor fully and then is removed. The plates are then slowly pulled apart. What happens to the potential difference between the plates as they are being separated?
A) It increases.
B) It decreases.
C) It remains constant.
D) It cannot be determined from the information given.
Choose the appropriate explanation how such a low value is possible given Saturn's large mass - 100 times that of Earth.
a. This low value is possible because the magnetic field of Saturn is so strong.
b. This low value is possible because the magnetic field of Saturn is so weak.
c. This low value is possible because the density of Saturn is so high.
d. This low value is possible because the density of Saturn is so low.
Answer:
Explanation:
That is an amazing fact.
The minus sign is what you have to pay attention to. The earth has a mass of 100 times that of Saturn. As someone on here once noted, Saturn has such a low density that it would float in water.
The answer is D
Xác định ứng lực trong các thanh BC,
CF và FE của hệ giàn và chỉ rõ các thanh
chịu kéo hay nén. Cho P1=P2=600 lb,
P3=800 lb
Answer:
............................................
Explanation:
It is easy to produce a potential difference of several thousand volts between your body and the floor by scuffing your shoes across a nylon carpet. When you touch a metal doorknob, you get a mild shock. Yet contact with a power line of comparable voltage would probably be fatal. Why is there a difference?
Answer:
In sof the friction with the nylon is very small and the current with the line e is largeummary
Explanation:
When we rub the shoes against the carpet, static electricity is produced, when you touch the metal knob you close the circuit and the current can circulate to three of the body, the value of this current is of the order of micro volts, for which a small discharge, the power that circulates through the body is very small of the order of 0.005 A
When you touch the power line, the voltage may be small, but the amount of current that can generate them is of the order of tens of amps, the electric shock is much greater per location.
In general there is a rule that if the body resumes more than P = 4000W the discharge could be fatal.
In sof the friction with the nylon is very small and the current with the line e is largeummary, the difference is that the current at the stop , so the paper that passes through the body is large and can be dangerous.
In contact with metal doorknob, get a mild shock while with power line of same voltage, fatal the body as the amount of current is more.
What is charging by friction?When the two materials are rubbed each other, then the electric charged generated between them.
This charging of materials, due to the rubbing of two materials against each other, is called the charging by friction.
It is easy to produce a potential difference of several thousand volts between the body and the floor by scuffing your shoes across a nylon carpet.
In this case, the potential difference may be higher, but the value of current is very low. Thus, when the body touches a metal doorknob, it will get a mild shock.
Now, in another case, the contact with a power line of comparable voltage would probably be fatal. This is because in the power line the amount of current is much higher.
Hence, in contact with metal doorknob, get a mild shock while with power line of same voltage, fatal the body as the amount of current is more.
Learn more about the charging by friction here;
https://brainly.com/question/8418256
g Light that is incident upon the eye is refracted several times before it reaches the retina. As light passes through the eye, at which boundary does most of the overall refraction occur?
Answer
Explanation
:giác mạc
1:
Forces and Motion:Question 2
A car is travelling east, when suddenly a more massive car travelling
north hits it with a greater force. What is likely to happen to the car
that was originally travelling east?
Explanation:
the car will be brought back
A 700N marine in basic training climbs a 10m vertical rope at constant speed in 8sec. what is power put
Answer:
875 Watts
Explanation:
P = W/t = mgh/t = 700(10)/8 = 875 Watts
Keisha writes that if an object has any external forces acting on it, then the object can be in dynamic equilibrium but not
static equilibrium
Which statement best describes Keisha's error?
An object that is not moving is always in static equilibrium.
O An object that is moving must be in dynamic equilibrium.
An object in either state of equilibrium must have no forces acting on it.
An object in either state of equilibrium must have no net force acting on it.
Answer:
An object in either state of equilibrium must have no net force acting on it.
Explanation:
Answer: An object in either state of equilibrium must have no net force acting on it.
Explanation:
An ideal spring is hung vertically from the ceiling. When a 2.0-kg mass hangs at rest from it the spring is extended 6.0 cm from its relaxed length. A downward external force is now applied to the mass to extend the spring an additional 10 cm. While the spring is being extended by the force, the work done by the spring is:
a. -3.6 J
b. -3.3 F
c. -3.4 times 10^-5 J
d. 3.3 J
e. 3.6 J
Answer:
b) - 3.3 J
Explanation:
Given;
mass, m = 2 kg
initial extension of the spring, x = 6 cm = 0.06 m
The weight of the mass on the spring;
W = mg
where;
g is acceleration due to gravity = 9.81 m/s²
W = 2 x 9.81
W = 19.62 N
The spring constant is calculated as;
W = kx
k = W/x
k = 19.62 / 0.06
k = 327 N/m
The work done by the spring when it is extended to an additional 10 cm;
work done = force x distance
distance = extension, x = 10 cm = 0.1 m
The work done by the spring opposes the applied force by acting in opposite direction to the force.
W = - Fx
W = - (kx) x
W = - kx²
W = - (327) x (0.1)²
W = - 3.27 J
W ≅ - 3.3 J
Therefore, the work done by the spring by opposing the applied force is -3.3 J
A physics student likes to study while listening to loud music. If electricity costs 12.00$/kWh (kilowatt-hour), how much would it cost the student to run a 220 W stereo system 8.0 hours per day for 10 days of studying?
Answer:
the cost of running the stereo is $211.2
Explanation:
Given;
cost of electricity, = 12.00$/kWh
power consumed by the stereo system, P = 220 W
duration of the power consumption, t = 8 hours
number of days, = 10 days
total time of the power consumption = 8 hours x 10 = 80 hours
power consumed in kW = 220 W / 1000 = 0.22 kW
Energy consumed = 0.22 kW x 80 h = 17.6 kWh
The cost of using 17.6 kWh
= 17.6 x $12
= $211.2
Therefore, the cost of running the stereo is $211.2
An AM radio transmitter broadcasts 50.0 kW of power uniformly in all directions. I live 10 km from this station. What is the maximum strength of Electric Field in my house
Answer:
[tex]E_0=0.173N/C[/tex]
Explanation:
From the question we are told that:
Power [tex]P=50kw=>50*10^3w[/tex]
Distance [tex]d=10km=10000m[/tex]
Generally the equation for Intensity is mathematically given by
[tex]I=\frac{P}{4\pi d^2} w/m^2[/tex]
[tex]I=\frac{50*10^3}{4 \pi 10000^2} w/m^2[/tex]
[tex]I=3.98*10^{-5}w/m^2[/tex]
Generally Intensity is also
[tex]I=\frac{1}{2}cE_0^2e[/tex]
Where
[tex]e=8.854*10^{-12}Nm^2/c^2[/tex]
Therefore
[tex]E_0=\sqrt{\frac{2I}{c *e}}[/tex]
[tex]E_0=\sqrt{\frac{2*3.98*10^{-5}}{3*10^8 *8.854*10^{-12}}}[/tex]
[tex]E_0=0.173N/C[/tex]
A 3.0 kg block is pushed by a 14 N force. If µ = 0.6, will the block move?
Answer:
The block will not move.
Explanation:
We'll begin by calculating the frictional force. This can be obtained as follow:
Coefficient of friction (µ) = 0.6
Mass of block (m) = 3 Kg
Acceleration due to gravity (g) = 10 m/s²
Normal reaction (R) = mg = 3 × 10 = 30 N
Frictional force (Fբ) =?
Fբ = µR
Fբ = 0.6 × 30
Fբ = 18 N
From the calculations made above, the frictional force of the block is 18 N. Since the frictional force (i.e 18 N) is bigger than the force applied (i.e 14 N), the block will not move.
signment
Saved
Help
While an elevator of mass 984 kg moves downward, the tension in the supporting cable is a constant 7730 N. Between t= 0 and t=
4.00 s, the elevator's displacement is 5.00 m downward. What is the elevator's speed at t= 4.00 s?
m/s
Answer:
v = 5.15 m/s
Explanation:
At constant velocity, the cable tension will equal the car weight of 984(9.81) = 9,653 N
As the cable tension is less than this value, the car must be accelerating downward.
7730 = 984(9.81 - a)
a = 1.95 m/s²
kinematic equations s = ut + ½at² and v = u + at
-5.00 = u(4.00) + ½(-1.95)4.00²
u = 2.65 m/s the car's initial velocity was upward at 2.65 m/s
v = 2.65 + (-1.95)(4.00)
v = -5.15 m/s
Imagine that you and your lab partner are standing on smooth ice holding onto opposite ends of a long rope. There is no friction between your feet and the ice. You tug gently on the rope. (a)Describe the motion of you and your lab partner before, during, and after the tug. Be as specific as you can. Expla
Answer:
Following are the complete solution to the given question:
Explanation:
In this question, before tug they are at rest, thus their initial momentum is 0 [tex]\pi=0[/tex], according to the law of conservation [tex]p_f=0[/tex] thus both should move in the opposite direction whose sum of the momentums is equaled to zero as there is no friction they will continue to move with their velocities until their collision. Its collision doesn't happen it will continue up to an infinite distance.
The motion of both you and your partner depends on the tension in the rope.
We must note that frictional force is the force that acts between two surfaces in contact with each other. The frictional force depends on the nature of the surfaces in contact.
Now, since there is no friction between your leg and the ice. The motion of both you and your partner depends on the tension in the rope.
Learn more about tension force: https://brainly.com/question/1195122
a method of reducing friction
Answer:
Lubrication
Explanation:
People oil/lubricate bicycle chains because the chain turns around the cogs and rub together so this help with friction.
Hope this helps :)
Answer:
The method of reducing friction are :
i) In moving parts of machine friction can be reduced by using a ball bearing between the moving surfaces
ii) The bodies of aeroplane ,ship ,boat etc are made streamlined to reduce friction.
iii) Friction can be reduced by polishing rough surfaces. For example : carrom boards are highly polished to reduce friction.
I hope this help you:)
A stationary horn emits a sound with a frequency of 228 Hz. A car is moving toward the horn on a straight road with constant speed. If the driver of the car hears the horn at a frequency of 246 Hz, then what is the speed of the car? Use 340 m/s for the speed of the sound
Answer: 26.84 m/s
Explanation:
Given
Original frequency of the horn [tex]f_o=228\ Hz[/tex]
Apparent frequency [tex]f'=246\ Hz[/tex]
Speed of sound is [tex]V=340\ m/s[/tex]
Doppler frequency is
[tex]\Rightarrow f'=f_o\left(\dfrac{v+v_o}{v-v_s}\right)[/tex]
Where,
[tex]v_o=\text{Velocity of the observer}\\v_s=\text{Velocity of the source}[/tex]
Insert values
[tex]\Rightarrow 246=228\left[\dfrac{340+v_o}{340-0}\right]\\\\\Rightarrow 366.84=340+v_o\\\Rightarrow v_o=26.8\ m/s[/tex]
Thus, the speed of the car is [tex]26.84\ m/s[/tex]
Liquid plastic is frozen in a physical change that increases its volume. What can be known about the plastic after the change?
(A) Its mass will increase.
(B) Its density will increase.
(C) Its mass will remain the same.
(D) Its density will remain the same.
Answer:
c
Explanation:
Liquid plastic is frozen in a physical change that increases its volume,it can be known about the plastic that Its mass will remain the same, therefore the correct answer is option C.
What is the matter?Anything which has mass and occupies space is known as matter ,mainly there are four states of matter solid liquid gases, and plasma.
These different states of matter have different characteristics according to which they vary their volume and shape.
It is known about plastic that its mass will remain the same when liquid plastic is frozen, by increasing its volume.
Liquid plastic is frozen in a physical change that increases its volume,it can be known about the plastic that Its mass will remain the same, therefore the correct answer is C.
To earn more about the matter here,refer to the link;
brainly.com/question/9402776
#SPJ2
A object of mass 3.00 kg is subject to a force Fx that varies with position as in the figure below. A coordinate plane has a horizontal axis labeled x (m) and a vertical axis labeled Fx (N). There are three line segments. The first segment runs from the origin to (4,3). The second segment runs from (4,3) to (11,3). The third segment runs from (11,3) to (17,0). (a) Find the work done by the force on the object as it moves from x = 0 to x = 4.00 m. J (b) Find the work done by the force on the object as it moves from x = 4.00 m to x = 11.0 m. J (c) Find the work done by the force on the object as it moves from x = 11.0 m to x = 17.0 m. J (d) If the object has a speed of 0.450 m/s at x = 0, find its speed at x = 4.00 m and its speed at x = 17.0 m.
Answer:
Explanation:
An impulse results in a change of momentum.
The impulse is the product of a force and a distance. This will be represented by the area under the curve
a) W = ½(4.00)(3.00) = 6.00 J
b) W = (11.0 - 4.00)(3.00) = 21.0 J
c) W = ½(17.0 - 11.0)(3.00) = 9.00 J
d) ASSUMING the speed at x = 0 is in the direction of applied force
½(3.00)(v₄²) = ½(3.00)(0.450²) + 6.00
v₄ = 2.05 m/s
½(3.00)(v₁₇²) = ½(3.00)(0.450²) + 6.00 + 21.0 + 9.00
v₁₇ = 4.92 m/s
If the initial speed is NOT in the direction of applied force, the final speed will be slightly less in both cases.
What is the frequency of a wavelength
the longer the wavelength, lower the frequency. In the same manner, shorter the wavelength, higher will be the frequency.
Wavelength is inversely proportional to frequency.
The cart travels the track again and now experiences a constant tangential acceleration from point A to point C. The speeds of the cart are 11.0 ft/s at point A and 18.0 ft/s at point C. The cart takes 5.00 s to go from point A to point C, and the cart takes 1.30 s to go from point B to point C. What is the cart's speed at point B
Answer:
The speed at B is 16.18 ft/s .
Explanation:
Speed at A, u = 11 ft/s
Speed at C, v' = 18 ft/s
Time from A to C = 5 s
Time from B to C = 1.3 s
Let the speed of car at B is v.
Let the acceleration is a.
From A to B
Use first equation of motion
v = u + a t
18 = 11 + a x 5
a = 1.4 ft/s^2
Let the time from A to B is t' .
t' = 5 - 1.3 = 3.7 s
Use first equation of motion from A to B
v = 11 + 1.4 x 3.7 = 16.18 ft/s
How can I solve the following statement?
What is the magnitude of the electric field at a point midway between a −8.3μC and a +7.8μC charge 9.2cm apart? Assume no other charges are nearby.
Answer:
The net electric field at the midpoint is 6.85 x 10^7 N/C.
Explanation:
q = − 8.3 μC
q' = + 7.8 μC
d = 9.2 cm
d/2 = 4.6 cm
The electric field due to the charge q at midpoint is
[tex]E = \frac{k q}{r^2}\\\\E = \frac{9\times 10^9\times 8.3\times 10^{-6}}{0.046^2}\\\\E = 3.53\times 10^7 N/C[/tex] leftwards
The electric field due to the charge q' at midpoint is
[tex]E' = \frac{k q}{r^2}\\\\E' = \frac{9\times 10^9\times 7.8\times 10^{-6}}{0.046^2}\\\\E' = 3.32\times 10^7 N/C[/tex]
The resultant electric field at mid point is
E'' = E + E' = (3.53 + 3.32) x 10^7 = 6.85 x 10^7 N/C
