I WILL GIVE BRAINLIEST (This question will give you 15+ points)

3. Explain and give an example of "lookback time".

Answers

Answer 1

Answer:

Lookback time explains that the farther away something is, farther in the past we see it. The Sun's light takes about 8 minutes to reach our eyes. So in reality, we see the Sun as it was 8 minutes ago.

Explanation:

Answer 2
Andromeda Galaxy is an example because it’s 2.5 million light years away

Related Questions

Which factor does not affect the strength of an electromagnet?
O A. The number of coils of wire
O B. The material of the core
C. The placement of the ammeter in the circuit
O D. The number of batteries added to the circuit

Answers

C. The placement of the ammeter in the circuit

Your science class is going to play a game of tug-of-war and you need to divide up the teams. There are 11 people participating. If you want equal teams, how would you decide who is on which side and why? Use what you have learned about Newton's Laws of motions to explain. I’ll give brainly

Answers

Answer: You would divide the kids up by how much they weighed in mass until you would get and equal weight for both teams so the tug of war match would be equal.

Explanation:

Since the goal is to have equal teams, the kids would be divided based on their weights until both teams have equal weight.

There are three Newton's law of motion. The first law is that an object will not alter its motion unless there's a force that acts on it.

In the second law,  an object's force equals the mass multiplied by the acceleration. The third law explains that when there is an interaction between two objects, forces are applied.

Since there are 11 people participating and the person wants equal teams, the kids would be divided based on their weights. This is to ensure that the total weights for both teams are the same.

Read related link on:

https://brainly.com/question/13532462

where can nuclear fusion be found

Answers

Answer:

In the core of stars

Explanation:

Nuclear fusion is usually found in the cores of stars.

In nuclear fusion, there is a combination of atomic nuclei to form a larger one.

The process is accompanied with the release of a large amount of energy. The energy released is used to set up another fusion reaction. In the sun, two hydrogen nuclei are combining to give a helium nuclei with the release of a large amount of energy.

Answer:

Nuclear fusion of hydrogen to form helium occurs naturally in the sun and other stars.

DESPERATE WILL GIVE BRAINLIST AND THANKS
The Cenozoic Era was the “age of the dinosaurs.”
Question 2 options:
True
False

Answers

Answer: False

Explanation: The Mesozoic Era was the “age of the dinosaurs.” The era ended with “The Great Extinction” which marked the end of the dinosaurs as the Cenozoic era began.

Plz help Select ALL of the objects that are accelerating?
1 An apple falling off of a tree that speeds up as it falls towards the ground
2 A racecar driving at a speed of 100 miles/hour as it goes around a curve in the racetrack
3 A beam of light traveling from the sun to the Earth at a speed of -300,000,000 meters/second
4 A bus that is slowing down as it approaches the bus stop

Answers

1, 2, and 4
because 1 and 4 are changing their speed. While 2 is changing directions.

Kieran pushes a box with a force of 35 N. It accelerates at 5 m/s2. What is the first step that is needed to calculate the mass of the box?

Identify the formula to calculate velocity.
Identify the formula to calculate force.
Identify the formula to calculate acceleration.
Identify the formula to calculate weight.

Answers

Answer:

f=ma

mass of box =7kg

Explanation:

Answer:

Identify the formula to calculate velocity.

Explanation:

Sorry I have no explanation.

:(

But hope this helps!!!

Why is an iron bolt attracted to a magnet?
A. When it is in a magnetic field, it becomes a temporary magnet.
B. It becomes a temporary magnet, whether or not it is in a magnetic
field.
C. It is attracted to Earth's magnetic field, which is always present.
D. When it is in a magnetic field, it becomes a permanent magnet.

Please, asap

Answers

Answer:

A. When it is in a magnetic field, it becomes a temporary magnet.

Explanation:

An iron bolt is attracted to a magnet because when in a magnetic field, the iron becomes a temporary magnet.

This is because the iron aligns their electrons in the magnetic fields.

This causes that attraction between the magnet and the iron. Metals like iron are said to be ferromagneticUnpaired electrons in iron spin in such a way that they align with the magnetic fields of the magnet.

You drive a bumper car into another bumper car whose driver has a much larger body mass than you do. Who experiences more of a jolt, you or the other driver?

Answers

Answer:

both drivers experience the same force. just with different "results"

Explanation:

Answer:

You do

Explanation:

Momentum is mass*velocity. So Newton's 3rd law equal and opposite reaction. Because you weigh less you will have more force act on you than the driver who weighs more.

What process uses atomic particles of carbon and uranium to determine exact age?
a--Radioactive dating
b--Law of superposition
c--Relative dating
d--Geologic time

Answers

Answer: Radioactive dating

Explanation: I took the test, and use the other answer, and got it wrong. The test told me that this is the correct one.

Answer:

Radioactive dating

I took the test recentley :)

When an atom that has no charge looses two electrons it becomes a

Answers

Answer: it becomes a positive ion

Explanation:

So, when an atom loses 2 electrons there will be no change in the number of neutrons. Therefore, an isotope will not form. Thus, it is concluded that when an atom with no charge loses two electrons, it becomes a positive ion.

Answer:

a positive ion

Explanation:

2. A squirrel runs 15 m to the north and finds an acorn. The squirrel then turns back to the south
and runs 8 m, at that point he decides to change direction and runs 24 m to the east to bury his
acorn.

Answers

Answer:

24 m to the right/ to the east

A quarterback can throw a 0.430 kg football at 75 m/h.
a. How much kinetic energy does the quarterback have to give to the
ball in order to give it that much kinetic energy?

Answers

Answer:

9.48*10^-5J

Explanation:

Step one:

given data

mass of ball m=0.43kg

speed v= 75m/h >>>>> to m/s = 75*0.00027

         v =0.021m/s

Required

the kinetic energy KE

Step two

applying

KE= 1/2mv^2

KE= 1/2*0.43*(0.021)^2

KE= 0.5*0.43*0.0004.41*10^-4

KE=0.000094815

KE=9.48*10^-5J

The kinetic energy is 9.48*10^-5J

unbalanced forces make an object:

A.accelerate

B.move at a constant speed

C.explode

D.come to rest

Answers

Answer:

i would have to say B makes the most sense

Explanation:

Move at a constant speed

help asap please!


calculate the answer to the correct number of significant digits.

-3.22 x 5.1

Answers

the answer is -16.422

Why does ice change into water on heating ?

Answers

Answer:

Explanation:

Changing states of matter and energy

A block of ice is solid water. When heat (a form of energy) is added, the ice melts into liquid water. If heat is removed from water vapour, the gas cools down and it condenses back into liquid water. Continue to cool the water (by removing heat), and it becomes solid ice.

plz mark as brainliest

Please mark me as Brainliest .......

A box is sitting on a very slightly
slanted shelf. It has remained still,
despite the slant. Suddenly, the box
slides off the shelf. This sudden
movement must be due to...?
A. The mass of the box
B. The weight of the shelf
C. Unbalanced forces
D. A ghost

Answers

i would say it’s c bc the other two would’ve make it fall automatically and d obviously isn’t it

a resistor, of resistance 47 , is damaged when it dissipates a power greater than 0.5W. determine the maximum voltage that can be applied without damaging the resistor​

Answers

Answer:

The maximum voltage that can be applied without damaging the resistor is 4.85 V

Explanation:

Electric Power in a Resistor

Given a resistor or resistance R connected to a circuit of voltage V carrying a current I. The relation between these three magnitudes is given by Ohm's Law:

V = R.I

The dissipated power P of a resistor can be calculated by the following equation, known as Joule's first law:

[tex]P = I^2.R[/tex]

Solving the first equation for I:

[tex]\displaystyle I=\frac{V}{R}[/tex]

Substituting in the second equation:

[tex]\displaystyle P=\frac{V^2}{R^2}.R[/tex]

Simplifying:

[tex]\displaystyle P=\frac{V^2}{R}[/tex]

Solving for V:

[tex]V=\sqrt{P.R}[/tex]

The resistor has a resistance of R=47Ω and can hold a maximum power of P=0.5 W, thus the maximum voltage is:

[tex]V=\sqrt{0.5\cdot 47}[/tex]

[tex]V=\sqrt{23.5}[/tex]

V = 4.85 V

The maximum voltage that can be applied without damaging the resistor is 4.85 V

how do you find Speed and Velocity? (formula)

Answers

Basically speed is equal to distance divided by time

Explanation:

velocity is just speed and direction

speed: the distance traveled divided by the time, d/t
velocity is just speed and direction, for example, 30 miles to the West

In the periodic table, where can the atomic mass of an element be found?

Answers

Answer:

protons + neutrons

Explain:

Is equivalent to the number of protons and neutrons in the atom

Answer:

The atomic mass of an element is underneath the symbols whereas for Li or Lithium it is 6.94 then for B or Boron it is 10.81.

Explanation:

So in otherwords the atomic mass is right under the symbol of an element.

If a permanent magnet picks up a steel paper clip, the paper clip also
becomes a magnet. How does an electromagnet differ from the magnetized
paper clip?
A. An electric current can run through a permanent magnet to
magnetize the steel paper clip, but an electric current cannot run
through the paper clip.
B. A magnet does not form when an electric current interacts with a
magnetic field, but a magnet will form when an electromagnet
interacts with a permanent magnet.
C. An interaction between electricity and magnetism produces an
electromagnet, while a permanent magnet induces the paper clip's
magnetic field.
D. An interaction between electricity and magnetism induces the
paper clip's magnetic field, while an electromagnet is produced by
a permanent magnet.

Answers

I think the answer is C
Hope this helps you have a great night!!

An interaction between electricity and magnetism produces an

electromagnet, while a permanent magnet induces the paper clip's

magnetic field. Hence, option (C) is correct.

What re permanent magnet and electromagnet?

An object that can generate a magnetic field, attract unlike poles, and repel like poles is referred to as a magnet.

Magnets that are frequently utilised are permanent magnets. Because they maintain their magnetic quality after being magnetised, they are referred to as permanent magnets.

A coil of wire is used to create electromagnets (wire curled in series). This generates a magnetic field more effectively than a wire running straight. By tightly winding a wire around a strong magnetic core formed of an iron-based substance, this effect can be amplified. In the image above, a coil is seen wrapped around an iron nail. The iron nail is not magnetic on its own.

Learn more about magnet here:

https://brainly.com/question/2841288

#SPJ5

Calculate the final velocity of a 12Kg object falling 20 m.

Answers

Answer:

19.80 m/s

Explanation

you just multiply the acceleration of gravity by the amount of time since it was let go of. So you get: velocity = 19. 80 m/s^2 * time, or V = gt. The negative sign just means that the object is moving downwards.

A 515-kg roller coaster is at the bottom of a loop with a radius of 10 m. If the speed at the
Bottom of the loop is 20 m/s, what is the force of the track pushing up on the vehicle at this
point?

Answers

Answer:

20600N

Explanation:

Given parameters:

Mass of the roller coaster  = 515kg

radius  = 10m

Speed  = 20m/s

Unknown:

Force of the track pushing up on the vehicle  = ?

Solution:

The force pulling the roller coaster along the track is the centripetal force.

To find the centripetal force, use the expression below;

  F  = [tex]\frac{mv^{2} }{r}[/tex]

where;

  m is the mass

  v is the speed

  r is the radius

Now insert the parameters and solve;

              F = [tex]\frac{515 x 20^{2} }{10}[/tex]  = 20600N

Water (density = 1x10^3 kg/m^3) flows at 15.5 m/s through a pipe with radius 0.040 m. The pipe goes up to the second floor of the building, 3.5 m higher, and the pressure remains unchanged. What is the speed of the water flow in the pipe on the second floor?

Answers

Answer:

The speed of the water flow in the pipe on the second floor is approximately 13.1 meters per second.

Explanation:

By assuming that fluid is incompressible and there are no heat and work interaction through the line of current corresponding to the pipe, we can calculate the speed of the water floor in the pipe on the second floor by Bernoulli's Principle, whose model is:

[tex]P_{1} + \frac{\rho\cdot v_{1}^{2}}{2}+\rho\cdot g\cdot z_{1} = P_{2} + \frac{\rho\cdot v_{2}^{2}}{2}+\rho\cdot g\cdot z_{2}[/tex] (1)

Where:

[tex]P_{1}[/tex], [tex]P_{2}[/tex] - Pressures of the water on the first and second floors, measured in pascals.

[tex]\rho[/tex] - Density of water, measured in kilograms per cubic meter.

[tex]v_{1}[/tex], [tex]v_{2}[/tex] - Speed of the water on the first and second floors, measured in meters per second.

[tex]z_{1}[/tex], [tex]z_{2}[/tex] - Heights of the water on the first and second floors, measured in meters.

Now we clear the final speed of the water flow:

[tex]\frac{\rho\cdot v_{2}^{2}}{2} = P_{1}-P_{2}+\rho \cdot \left[\frac{v_{1}^{2}}{2}+g\cdot (z_{1}-z_{2}) \right][/tex]

[tex]\rho\cdot v_{2}^{2} = 2\cdot (P_{1}-P_{2})+\rho\cdot [v_{1}^{2}+2\cdot g\cdot (z_{1}-z_{2})][/tex]

[tex]v_{2}^{2}= \frac{2\cdot (P_{1}-P_{2})}{\rho}+v_{1}^{2}+2\cdot g\cdot (z_{1}-z_{2})[/tex]

[tex]v_{2} = \sqrt{\frac{2\cdot (P_{1}-P_{2})}{\rho}+v_{1}^{2}+2\cdot g\cdot (z_{1}-z_{2}) }[/tex] (2)

If we know that [tex]P_{1}-P_{2} = 0\,Pa[/tex], [tex]\rho=1000\,\frac{kg}{m^{3}}[/tex], [tex]v_{1} = 15.5\,\frac{m}{s}[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] and [tex]z_{1}-z_{2} = -3.5\,m[/tex], then the speed of the water flow in the pipe on the second floor is:

[tex]v_{2}=\sqrt{\left(15.5\,\frac{m}{s} \right)^{2}+2\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (-3.5\,m)}[/tex]

[tex]v_{2} \approx 13.100\,\frac{m}{s}[/tex]

The speed of the water flow in the pipe on the second floor is approximately 13.1 meters per second.

A 750 kg car zooms away from a red light with an acceleration of 7.8 m/s2. What is the
average net force in Newtons that the car experiences?

Answers

Answer:

5850N

Explanation:

Given parameters:

Mass of the car  = 750kg

Acceleration = 7.8m/s²

Unknown:

Net force  = ?

Solution:

According to Newton's second law of motion;

  Force  = mass x acceleration

To find the net force input the given parameters:

   Net force on the car  = 750 x 7.8  = 5850N

what's the turtle's velocity??

Answers

Answer:

[tex]\boxed {\boxed {\sf v\approx0.24 \ m/s}}[/tex]

Explanation:

Velocity can be found by dividing the displacement by the time.

[tex]v=\frac{displacement}{time}[/tex]

The displacement is 4.77 meters and the time is 19.5 seconds.

[tex]displacement=4.77 \ m \\time=19.5 \ s[/tex]

Substitute the values into the formula.

[tex]v=\frac{4.77 \ m }{19.5 \ s}[/tex]

Divide.

[tex]v=0.244615385 \ m/s[/tex]

Let's round to the nearest hundredth (just to make the answer more concise).

The 4 in the thousandth place tells us to leave the 4 in the hundredth place.

[tex]v\approx0.24 \ m/s[/tex]

The velocity of the turtle is about 0.24 meters per second.

When you put the iron cube in the olive oil and the brick cube in the water what loses heat more quickly and why? The oil or the water? Explanation why oil or water.

Answers

Answer:

Oil

Explanation:

The oil will lose heat more quickly compared to water. This is because oil has a lower specific heat capacity compared to water.

Specific heat capacity is the amount of heat require to raise the temperature of 1kg of a substance by 1k. Water requires a high amount of heat to attain this level and it will have high specific heat capacity. Such substance takes time to gain heat and also will take time to loose the heat. Oil has a lower specific heat capacity. It gains and loses heat easily.

You are running and want to drop an object that you're carrying into a box. You must let go of the object:

a. before the object passes over the box
b. after the object passes over the box
c. just as the object is passing over the box

Answers

Answer:

a. before the object passes over the box

Explanation:

To let in the object into the box, you must drop the object before its passes over the box.

This form of problem is a projectile motion. Dropping the object before it passes over the box will direct it into box at an angle. The object will drop in the box if it is dropped after passing or just as it passes over the box.

Consider this situation: A team of landscapers pull an
unplanted tree across the lawn. Of the forces listed, identify
which act upon the tree.

Normal
Gravity
Applied
Friction
Tension
Air Resistance

Answers

Answer:

Explanation:

all

How long does it take for a hook to reach the top of a building if the velocity is 50 m/s

Answers

Answer:

how tall is building

Explanation:

What is one way that potential energy might be involved in rescue team missions?

Answers

Answer:

You may be saving someone from a rock slide, where the rocks will fall at any time, before they fall they have potential energy.

Explanation:

Other Questions
(9x-4y) x (-2) + (3x+2y) Now use decimal numbers to write an expression that represents the length of the walls that Seth measured. 13. help the answer choose are'................a) northwest ordinanceB)Virginia planC) new jersey planD) the federalist papers Name the four Great Lakes that make up part of the US-Canadian border. Describe important characteristics of these lakes and explain their importance to both Canada and the United States. Make sure your answer is written in complete sentences. Which of the following is not true about DNA replication? aThe new DNA molecule has two newly-made strands. bIt occurs in the nucleus of eukaryotic cells. cIt must occur before a cell can divide. dThe double strand unwinds and unzips while it is being duplicated. Which statement is true about the end behavior of thegraphed function?O As the x-values go to positive infinity, the function'svalues go to negative infinity.As the x-values go to zero, the function's values go topositive infinity.O As the x-values go to negative infinity, the function'svalues are equal to zeroAs the x-values go to positive infinity, the function'svalues go to positive infinity. Please answer quickly In the fifth stanza of "Because I could not stop for Death," what is the speaker describing?An underground chapelHer own graveHer own fallen-down houseThe house of the person they are visiting An ____ is a comparison between two entities and may be accomplished with similes, metaphors, and personification ThemeSymbolism Characters Point of viewIrony Analogy Amir wants to change this model to represent a different isotope of oxygen How could he make this change?add one green candyBrearrange the blue candiesC.add one red candyDtake away two blue candies What is the best reason for writers to limit the use of multimedia? 6. A sled traveling at a speed of 3.0 m/s slows to a stop 4.0 m from the point whereits passenger rolled off. What is the magnitude of the horizontal net force thatslows the 110 N sled? (Assume ag = 10m/s2)D The real GDP of Country A grew by only 1% from 2011 to 2013, while the real GDP of Country B grew by 5% during that same time span. 1. Country B has a very high quality of life. 2. Country A has a modestly high quality of life. 3. Country A's economy has been in a period of contraction. 4. Country A has a high real GDP. 5. Country B will eventually have a higher real GDP than Country A if the economy of each country continues to grow this way. 6.Which of the following is the primary factor driving growth in the telecom technician career field?fiber optic cablingbroadband connectionssatellite internetlower quality devices Solve this question- How does thermal energy transfer when a room is heated by a furnace? a Hot air is absorbed by the objects in the room; cold air expands and rises. b Hot air is circulated through the room; the hot air rises, and cold air falls. c Hot air makes direct physical contact with the objects in the room and rises. d Hot air is transmitted by electromagnetic waves; the hot air rises and falls. which are considered noble gases Your family is planning a 6-day trip to Florida. You estimate that it will cost $450 per day in Tampa and $600 per day inOrlando. Your total budget is $3000. Which of the following is the system of equations that represents this situation? Submit the work as a file attachment. This means you will complete all work in a word processing document (e.g. Microsoft Word) and attach the file using the Submit Text Step 1: Find Some Physical ArtStart by thinking about all the places in your home, school, town, and general vicinity that you might come across physical art. Maybe there are various sculptures lining the streets in your town or perhaps there is a local museum that you enjoy visiting to admire the physical art. Or maybe you have various works of physical art right in your own home!Start exploring the physical art around you and choose a piece of physical art that you will use as inspiration for your digital art creation. Visit this piece of physical art with your camera in hand and take as many photographs as you possibly can from all angles and directions. You may even find it useful to bring a small notepad to jot down any observations that you make while viewing this art in person so it remains fresh in your memory.After you have fully locked all the details of this physical art piece into your mind (and into your camera/camera phone), you are ready to move on to the next step!Step 2: Research Software OptionsTake some time to explore online and learn about the various ways that digital art is created. What types of programs are used? Are there free websites or apps that might be helpful? What skills or tools will you need to call upon to create this digital art masterpiece?Make a list of the possible software tools and options that you find in your research that are available to help you create your digital art piece. Identify the program(s) or tool(s) that you plan to use for this lab.Step 3: Make a PlanNext, map out a loose plan for your digital art. This can be as simple as typing up some notes in a word processing document using bullet points to create a plan of action for how you will approach this digital creation.Some questions to consider:How will you capture the essence of the physical art digitally?What are some key aspects that you need to pay attention to?What components of the physical art are you apprehensive to re-create digitally?Are there any aspects of the physical art that you want to change when you re-create it digitally?It is important to note that while you should be able to recognize and see the resemblance between the physical art piece that you choose and your digital re-creation, you do have some creative ownership in this processafter all, youre the artist! That means that you have the creative freedom to shift or slightly change some aspects of the physical art that you want to while re-creating it digitally in order to truly make it your own!After exploring the possible programs or tools available to you to create your digital art and mapping out a plan, it is time to get started!Step 4: Create!Using whatever program or tools you decided on, jump right in to re-creating your physical piece of art in a digital medium.While you are creating your digital art, keep in mind that you will be submitting the photos of your physical piece of art along with your digital re-creation, and the resemblance should be evident. It is certainly okay for various details to be different based on your creative ideas and instincts, but make sure that the most defining and dominant features of the original piece of physical art are evident in your digital re-creation.Step 5: ReflectThe final piece in this lab is to compose a brief reflection/explanation of your digital re-creation. There are no specific questions that you need to answer in this reflection; however, you should aim to simply explain the components and features of your digital art piece that you are proud of and want recognized, as well as how these features relate to the physical piece.You can also discuss your experience with recreating a piece of physical art digitally and the challenges that you faced as well as the aspects of the assignment that you enjoyed.Your reflection should be no longer than one page; one to two paragraphs is sufficient.You will submit the photographs of the physical art piece you chose, your list of digital creation tools, your map or plan for your digital work of art, your actual digital re-creation, and your reflection all together.(i wanna do it on something with art) I did a chocolate lab. It was melting chocolate. These are the tree question please answer all. Please help me ASAP