Answers
how many electrons does tin have?
Answer : 2, 8, 18, 18, 4
Therefore, total electrons = 50
2,8,18,18,4
This is the right answer
Related Questions
Write the symbol for every chemical element that has atomic number greater than 55 and less than 140.8 u
Answers
A capsule containing 0.500 L of air at 1.00 atm is compressed to 3.25 atm. At that point, what is the volume of the gas in the capsule?
Answers
Answer:
V₂ = 0.154 Liters
Explanation:
Pressure => P
Volume => V
Temperature => T
mass (moles) => n
This problem...
P₁ = 1.00 ATM P₂ = 3.25 ATM
V₁ = 0.500L V₂ = ?
T₁ = constant T₂ = T₁ = constant
n₁ = constant n₂= n₁ = constant
P₁V₁/n₁T₁ = P₂V₂/n₂T₂ => V₂ = V₁(P₁/P₂) = 0.500L (1.00ATM/3.25ATM) = 0.154 Liters
Two common methods to generate an aldehyde is by oxidation of an alcohol and through ozonolysis.
a. True
b. False
Answers
Answer:
a. True.
Explanation:
Only primary and secondary alcohols can oxidise to give an aldehyde. But a weak oxidizing agent must be used to prevent formation of a carboxylic acid or ketone.
weak oxidizing agents: Chromyl chloride, silver/oxygen/500°C
take an example of ethanol:
[tex]{ \bf{CH _{3} CH_{2}OH \: \: \frac{Ag/O_{2} }{500 \degree C} > \: \:CH _{3} CHO}}[/tex]
[tex]{ \sf{CH _{3} CHO \: \: is \: ethanal}} [/tex]
By ozonolysis:
Here, reactants are Ozone gas, Carbon tetrachloride at a temperature (<20°C), ethanoic acid, zinc and water.
take an example of propanol:
if it undergoes ozonolysis, it gives ethanal and methanal.
Answer:
A. True
Explanation:
Only primary and secondary alcohols can oxidise to give an aldehyde. But a weak oxidizing agent must be used to prevent formation of a carboxylic acid or ketone.
weak oxidizing agents: Chromyl chloride, silver/oxygen/500°C
take an example of ethanol:
By ozonolysis:
Here, reactants are Ozone gas, Carbon tetrachloride at a temperature (<20°C), ethanoic acid, zinc and water.
take an example of propanol:
if it undergoes ozonolysis, it gives ethanal and methanal.
write the balanced equation for
[B]⁴[C][D]/[A]²
Answers
There are _______ alkanes with molecular formula C10H22
a. 74
b. 75
c. 76
d. 77
Answers
An atom's first 2 energy levels are filled and there are 2 electrons in the third energy
level. It's atomic number is:
Answers
Answer:
12
Explanation:
2+8+2=12
atomic no is the No of protons
Answer:
Atomic number is 12.
Explanation:
Atomic number = electrons in filled shells + outermost electrons
= 2 + 8 +2
= 12
A substance is made up of slow-moving particles that have very little space between them. Based on this information, what can most likely be concluded about this substance? O It is not a gas because its particles do not move continuously. It is a gas because its particles move continuously in a straight line. 0 It is not a gas because its particles do not have large spaces between them. It is a gas because its particles move in many different directions.
Answers
Answer:
o
Explanation:
it is not a gas because the particles do not move freely it may be a liquid or a solid partly and mostly liquidized.
Which of the following events takes place in the Kreb entry phase (acetyl COA from pyruvate)?
A). Only CO2 output
B). NAD is reduced, CO2 is released
C). NADH is oxidized, CO2 is released
D). Only NADH is oxidized
E). Only NAD is reduceed
Answers
Answer:
Alphabet C :NADH is oxidized,CO2 is reduced
What is the final volume, in L. of a balloon that was initially at 173.8 mL at 17.5°C and was then heated to 78.0*C?
Answers
Answer:
0.21 L.
Explanation:
From the question given above, the following data were obtained:
Initial temperature (T₁) = 17.5°C = 17.5°C + 273 = 290.5 K
Initial volume (V₁) = 173.8 mL
Final temperature (T₂) = 78 °C = 78 °C + 273 = 351 K
Final volume (V₂) =?
V₁/T₁ = V₂/T₂
173.8 / 290.5 = V₂ / 351
Cross multiply
290.5 × V₂ = 173.8 × 351
290.5 × V₂ = 61003.8
Divide both side by 290.5
V₂ = 61003.8 / 290.5
V₂ = 210 mL
Finally, we shall convert 210 mL to L. This can be obtained as follow:
1000 mL = 1 L
Therefore,
210 mL = 210 mL × 1 L / 1000 mL
210 mL = 0.21 L
Thus, the final volume of the balloon is 0.21 L.
Answer:
[tex]\boxed {\boxed {\sf 0.775 \ L}}[/tex]
Explanation:
1. Calculated Final VolumeWe are asked to find the final volume of a balloon given a change in temperature. We will use Charles's Law, which states the volume of a gas is directly proportional to the temperature. The formula for this law is:
[tex]\frac{V_1}{T_1}= \frac{V_2}{T_2}[/tex]
The initial volume is 173.8 milliliters and the initial temperature is 17.5 degrees Celsius.
[tex]\frac {173.8 \ mL}{17.5 \textdegree C}= \frac{V_2}{T_2}[/tex]
The balloon is heated to a final temperature of 78.0 degrees Celsius, but the volume is unknown.
[tex]\frac {173.8 \ mL}{17.5 \textdegree C}= \frac{V_2}{78.0 \textdegree C}[/tex]
We are solving for the final volume, so we must isolate the variable V₂. It is being divided by 78.0 degrees Celsius. The inverse of division is multiplication, so we multiply both sides by 78.0 °C.
[tex]78.0 \textdegree C *\frac {173.8 \ mL}{17.5 \textdegree C}= \frac{V_2}{78.0 \textdegree C} * 78.0 \textdegree C[/tex]
[tex]78.0 \textdegree C *\frac {173.8 \ mL}{17.5 \textdegree C}=V_2[/tex]
The units of degrees Celsius cancel.
[tex]78.0 *\frac {173.8 \ mL}{17.5}=V_2[/tex]
[tex]78.0 *9.931428571 \ mL= V_2[/tex]
[tex]774.6514286 \ mL =V_2[/tex]
2. Convert to LitersWe are asked to give the volume in liters, so we must convert out units. Remember that 1 liter contains 1000 milliliters.
[tex]\frac { 1 \ L}{1000 \ mL}[/tex]
[tex]774.6514286 \ mL * \frac{ 1 \ L}{1000 \ mL}[/tex]
[tex]774.6514286 * \frac{ 1 \ L}{1000}[/tex]
[tex]0.7746514286 \ L[/tex]
3. RoundThe original values of volume and temperature have 3 and 4 significant figures. We always round our answer to the least number of sig figs, which is 3. This is the thousandths place for the number we calculated. The 6 in the ten-thousandths place tells us to round the 4 up to a 5.
[tex]0.775 \ L[/tex]
The final volume is approximately 0.775 liters.
State the different radiations emitted by radioactive elements.
Answers
Answer:
gamma rays , alpha particles , beta particles , neutrons
Hope this helps :))
All of the following statements concerning crystal field theory are true EXCEPT Group of answer choices in an isolated atom or ion, the five d orbitals have identical energy. low-spin complexes contain the maximum number of unpaired electrons. in low-spin complexes, electrons are concentrated in the dxy, dyz, and dxz orbitals. the energy difference between d orbitals often corresponds to an energy of visible light. the crystal field splitting is larger in low-spin complexes than high-spin complexes.
Answers
Answer:
low-spin complexes contain the maximum number of unpaired electrons.
Explanation:
In the crystal field theory, the magnitude of crystal field splitting and the pairing energy determines whether a complex will be low spin or high spin.
Low spin complexes often have greater magnitude of crystal field splitting energy than low spin complexes.
High spin complexes have maximum number of unpaired electrons(most of the electrons are unpaired) while low spin complexes have a minimum number of unpaired electrons in a complex(most of the electrons are paired).
When (R)-2-chloro-3-methylbutane is treated with potassium tert-butoxide, a monosubstituted alkene is obtained. When this alkene is treated with HBr, a mixture of products is obtained. Identify all of the expected products.
Answers
Answer:
See explanation and image attached
Explanation:
The reaction of (R)-2-chloro-3-methylbutane with potassium tert-butoxide yields a monosubstituted alkene .
Since the base is bulky, the Hoffman product predominates because attack occurs at the less hindered carbon atom to yield the major product as shown.
The alkene reacts with HBr at the secondary carbon atom to yield a carbocation intermediate which is flat and planar. Attack on either face of the carbocation yields a racemic mixture of the (2R) and (2S) products.
Rearrangement of the carbocation to yield a tertiary carbocation gives the 2-bromo-2-methyl butane product as shown in the image attached.
A sample of gas occupies 12 L under a pressure of 1.2 atm. What
would its volume be if the pressure were increased to 3.6 atm?
(assume temp is constant)
Answers
Explanation:
here's the answer to your question
Aqueous hydrochloric acid HCl will react with solid sodium hydroxide NaOH to produce aqueous sodium chloride NaCl and liquid water H2O. Suppose 20. g of hydrochloric acid is mixed with 7.56 g of sodium hydroxide. Calculate the minimum mass of hydrochloric acid that could be left over by the chemical reaction. Round your answer to 2 significant digits.
Answers
here's the answer to your question
Define pressure. Group of answer choices force exerted by solids to the surrounding area force used to compress a gas force used to melt a solid force exerted per unit area by gas particles as they strike the surfaces around them force applied to a gas to condense it
Answers
Answer:
force exerted per unit area by gas particles as they strike the surfaces around them
Explanation:
According to the kinetic molecular theory, a gas is composed of molecules. The molecules of a gas are in constant random motion and collide frequently with each other as well as with the walls of the container.
Pressure is defined as force per unit area. The pressure of a gas is the force exerted per unit area by gas particles as they strike the surfaces around them hence the answer above.
The structure of the compound CuI is best described as a cubic closest packed array of iodide ions with the copper ions in tetrahedral holes. What percent of the tetrahedral holes are occupied in this solid
Answers
Answer:
12.5 %
Explanation:
In CCP, the effective number of anion is 4
That is there are 4 I- present in 1 unit cell
Number of tetrahedral void = 2*effective number of anion
= 2*4
= 8
In ZrI4, for every 4 anion, there are only 1 Zr atom.
So, one tetrahedral void is occupied per unit cell out of 8
% tetrahedral void occupied = 1*100/8
= 12.5 %
Answer: 12.5 %
The correct geometry around oxygen in CH3OCH3 is
(a). linear. (b). bent. C). tetrahedral/(a). trigonal planar
Answers
Explanation:
the force of the lone pairs from the bottom would cancel out the force of the lone pairs from the top. Thus, the molecule will be linear.
how many moles of KF are present in 46.5 grams of KF
Answers
Explanation:
here's the answer to your question
Answer:
0.8017
Explanation:
Find the molar Mass of KF
K = 39
F = 19
Total = 58
Note: these numbers are approximate. Use your periodic table to get the exact numbers.
mols = given mass / molar mass
given mass = 46.5
molar mass = 58
mols = 46.5 / 58
mols = 0.8017
What is a reaction rate?
Answers
Answer:
A reaction is the time that is required for a chemical reaction to go essential to completion
If we increase the temperature of the reaction that occurs in plants to create sugar. What direction does the equilibrium shift....
- Products
- No change
- Reactants
- Plants are not capable of this
Answers
The reaction used to produce sugar in plants is Photosynthesis,
6CO₂ + 6H₂O + heat ⇆ C₆H₁₂O₆ + 6O₂↑
we can see that this reaction is endothermic, it absorbs heat to occur
If we were to add more heat or increase the temperature, the left side of the equilibrium will be able to react much more, which would produce more glucose (aka sugar)
Hence increasing the temperature will shift the equilibrium to the right or towards the Products
Answer:
Explanation:
The reaction that occurs in plants to create sugar can be represented by the following equation:
6 CO2 + 6 H2O ↔ C6H12O6 + 6 O2
It is called photosynthesis because the reaction requires light energy for the plant. The reaction is controlled by enzyme within the plant. An increase in temperature will increase the collisions between enzyme and reactants; shifting the equilibrium towards the products, sugar and oxygen.
When a chemical changes from the solid phase to the gas phase, this is an example of What chemical property?
Answers
Answer:
sublimation
Explanation:
solid => liquid Melting
liquid => solid freezing
liquid => gas evaporation
gas => liquid condensation
solid => gas sublimation
gas => solid deposition (e.g.; formation of frost), however some scholars will also refer to this process as sublimation.
6) Hydrogen gas can be generated from the reaction between aluminum metal and hydrochloric acid:
2 Al(s) + 6 HCl(aq) + 2 AICI3, (aq) + 3 H2(g)
a. Suppose that 3.00 grams of Al are mixed with excess acid. If the hydrogen gas produced is directly collected
into a 850 mL glass flask at 24.0 °C, what is the pressure inside the flask (in atm)?
b. This hydrogen gas is then completely transferred from the flask to a balloon. To what volume (in L) will the
balloon inflate under STP conditions?
c. Suppose the balloon is released and rises up to an altitude where the temperature is 11.2 °C and the pressure is
438 mm Hg. What is the new volume of the balloon (in L)?
Answers
Stoichiometry refers to the relationship between the moles of reactants and products.
This question must be solved using both stoichiometry and the gas laws
The reaction equation is;
2 Al(s) + 6 HCl(aq) --------> 2 AICI3, (aq) + 3 H2(g)
Using stoichiometryNumber of moles of Al = 3g/27g/mol = 0.11 moles
According to the reaction equation;
2 moles of Al yields 3 moles of H2
0.11 moles of Al yields 0.11 * 3/2 = 0.165 moles
Using the gas lawsFrom the ideal gas equation;
PV=nRT
P = ?
n= 0.165 moles
V = 0.85 L
T = 297 K
R = 0.082 atmLK-1mol-1
P= nRT/V
P = 0.165 * 0.082 * 297/0.85
P= 4.73 atm
Under STP conditions;P1 = 4.73 atm
T1 = 297 K
V1 = 0.85 L
P2 = 1 atm
T2 =273 K
V2 =?
From the general gas equation;P1V1/T1 = P2V2/T2
P1V1T2 = P2V2T1
V2 = P1V1T2/P2T1
V2 = 4.73 * 0.85 * 273/1 * 297
V2 = 3.69 L
P1 = 760 mmHg
T1 = 273 K
V1 = 3.69
P2 = 438 mm Hg
T2 = 284.2 K
V2 =?
P1V1/T1 = P2V2/T2
P1V1T2 = P2V2T1
V2 = P1V1T2/P2T1
V2 = 760 * 3.69 * 284.2/438 *273
V2 = 797010.48/119574
V2= 6.67 L
https://brainly.com/question/1190311
According to an informal 1992 survey, the drinking water in about one-third of the homes in Chicago had lead levels of about 10 ppb. Dr. Koether lived in Chicago from 1996 to 1998. Assuming she drank 1.4 L of water a day, calculate the total amount of lead in mg (using one decimal place) that she was exposed to over the two years if she lived in a home that had such high levels of lead.
Answers
Answer:
10.2 mg
Explanation:
Step 1: Calculate the total amount of water she drank
1 year has 365 days and she lived in Chicago for 2 years = 2 × 365 days = 730 days.
If she drank 1.4 L of water per day, the total amount of water she drank is:
730 day × 1.4 L/day = 1022 L
Step 2: Calculate the amount of Pb in 1022 L of water
The concentration of Pb is 10 ppb (10 μg/L).
1022 L × 10 μg/L = 10220 μg
Step 3: Convert 10220 μg to milligrams
We will use the conversion factor 1 mg = 1000 μg.
10220 μg × 1 mg/1000 μg = 10.2 mg
balance equation of potassium sulphate+ water
Answers
Answer:
2KHCO
3
+H
2
SO
4
→K
2
SO
4
+2CO
2
+2H
2
O
Determine the highest level of protein structure described by each item.
a. Primary structure
b. Secondary structure
c. Tertiary structure
d. Quaternary structure
1. order of amino acids
2. overall macromolecule structure containing more than one polypeptide chain
Answers
From each of the protein structures listed, the option with the highest level of protein structure as regards with order of amino acids and overall macromolecule structure is quaternary structure. That is option D.
The protein one of the essential nutrients that is found in and consumed by mammals.
There are different types of proteins and their functions depends on their shape, structure or conformation.
The structure of proteins include:
Primary structure: This is the simplest shape of proteins. This is because, the amino acids of a polypeptide is arranged in a linear form.Secondary structure: This is the local folded structures that form within a polypeptide due to interactions between atoms of the backbone.Tertiary structure: These are three dimensional structures of proteins that occurs as a result of the interactions between the R groups of the amino acids that make up the protein.Quaternary structure: This protein structure contains multiple polypeptide chains also called subunits.Therefore, the option with the highest level of protein structure as regards with order of amino acids and overall macromolecule structure is quaternary structure.
Learn more here:
https://brainly.com/question/18159696
100 mL of 0.2 mol/L sodium carbonate solution and 200 mL of 0.1 mol/L calcium nitrate solution are mixed together. Calculate the mass of calcium carbonate that would precipitate and the concentration of the sodium nitrate solution that will be produced.
Answers
Answer:
Explanation:
Na2CO3+Ca(NO3)2=CaCO3+2NaNO3
nNa2CO3=0.02
nCa(NO3)2=0.02
mCaCO3=0.02*100=2 gram
nNaNo3=0.04
Cm=2/15
From the calculation, the mass of the product is 2 g.
What is a reaction?A chemical reaction occurs when two more substances are mixed together. In this case, the reaction is shown by; Ca(NO3)2 + Na2CO3 ----> CaCO3(s) + 2NaNO3.
Number of moles of Na2CO3 = 100/1000 L * 0.2 mol/L = 0.02 moles
Number of moles of Ca(NO3)2 = 200/1000 L * 0.1 mol/L = 0.02 moles
Since the reaction is equimolar, amount of the product = 0.02 moles * 100 g/mol = 2 g
Learn more about chemical reaction:https://brainly.com/question/22817140
#SPJ6
Nicotine is a toxic substance present in tobacco leaves. There are two lone pairs in the structure of nicotine. In general, localized lone pairs are much more reactive than delocalized lone pairs. With this information in mind, do you expect both lone pairs in nicotine to be reactive?
A. Both lone pairs are delocalized and, therefore, both are expected to have the same reactivity.
B.Lone pair in pyrrolidine ring is localized and, therefore, is expected to be more reactive.
C. Both lone pairs are localized and, therefore, both are expected to be reactive.
D. Lone pair in pyridine ring is localized and, therefore, is expected to be more reactive.
Answers
Answer:
B.Lone pair in pyrrolidine ring is localized and, therefore, is expected to be more reactive.
Explanation:
There are two nitrogen atoms bearing lone pairs of electrons in the structure of nicotine as shown in the image attached.
One nitrogen atom is found in the pyrrolidine ring. The lone pair on this nitrogen atom is localized hence it is more reactive than the lone pair of electrons found on the nitrogen atom in the pyridine ring which is delocalized a shown in the image attached to this answer.
If the balance were not tared prior to weighing out the KHP.... how would you expect this to affect the molarity of NaOH calculated? What type of error is this?
Answers
Answer:
Following are the response to the given question:
Explanation:
In the given scenario, When the balance has never been tainted before the KHP is weighted, which can affect the molar concentration of NaOH because its molarity is directly proportional to the weight including its substance. In this question it is the mistake is systemic because it may be corrected by modifying balancing parameters.
pls help name any of these compounds
Answers
Answer:
D. Propanol
Explanation:
C3H7OH the presence of alcohol functional group makes it propanol
In the reoxidation of QH2 by purified ubiquinone-cytochrome c reductase (Complex III) from heart muscle, the overall stoichiometry of the reaction requires 2 mol of cytochrome c per mole of QH2 because:
Answers
Answer: Options related to your question is missing below are the missing options
a. cytochrome c is a one-electron acceptor, whereas QH2 is a two-electron donor.
b. cytochrome c is a two-electron acceptor, whereas QH2 is a one-electron donor.
c. cytochrome c is water soluble and operates between the inner and outer mitochondrial membranes
d. heart muscle has a high rate of oxidative metabolism, and therefore requires twice as much cytochrome c as QH2 for electron transfer to proceed normally.
e. two molecules of cytochrome c must first combine physically before they are catalytically active.
answer:
cytochrome c is a one-electron acceptor, whereas QH2 is a two-electron donor. ( A )
Explanation:
The overall stoichiometry of the reaction requires 2 mol of cytochrome per mole of QH2 because a cytochrome is simply a one-electron acceptor while QH2 is not a one-electron donor ( i.e. it is a two-electron donor )
An electron donor in a reaction is considered a reducing agent because it donates its electrons to another compound thereby self oxidizing itself in the process.
