how many electrons are in as3-

Answer:

Some distortion exists somewhere in the map.

Explanation:

Any map that shows the entire world will have some distortion somewhere in the map. This is because we are transforming a spherical body to a flat rectangular dimensional surface.

Answer:

21.95 g of AgCl.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

AlCl3(aq) + 3AgNO3(aq) —> 3AgCl(s) + Al(NO3)3(aq)

Next, we shall determine the masses of AlCl3 and AgNO3 that reacted and the mass of AgCl produced from the balanced equation. This is illustrated below:

Molar mass of AlCl3 = 27 + (3×35.5) = 133.5 g/mol

Mass of AlCl3 from the balanced equation = 1 × 133.5 = 133.5 g

Molar mass of AgNO3 = 108 + 14 + (3×16) = 170 g/mol

Mass of AgNO3 from the balanced equation = 3 × 170 = 510 g

Molar mass of AgCl = 108 + 35.5 = 143.5 g/mol

Mass of AgCl from the balanced equation = 3 × 143.5 = 430.5 g

From the balanced equation above,

133.5 g of AlCl3 reacted with 510 g of AgNO3 to produce 430.5 g of AgCl.

Next, we shall determine the limiting reactant. This can be obtained as follow:

From the balanced equation above,

133.5 g of AlCl3 reacted with 510 g of AgNO3.

Therefore,

22 g of AlCl3 will react with =

(22 × 510)/133.5 = 84.04 g of AgNO3.

Thus, we can see that it will require a higher mass (i.e 84.04 g) of AgNO3 than what was given (i.e 26 g) to react completely with 22 g of AlCl3. Therefore, AgNO3 is the limiting reactant and AlCl3 is the excess reactant.

Finally, we shall determine the mass of the solid product (AgCl) produced from the reaction.

In this case the limiting reactant will be used because, it will produce the maximum yield of the reaction since all of it is used up in the reaction.

The limiting reactant is AgNO3 and the mass of AgCl produced can be obtained as follow:

From the balanced equation above,

510 g of AgNO3 reacted to produce 430.5 g of AgCl.

Therefore, 26 g of AgNO3 will react to produce = (26 × 430.5)/510 = 21.95 g of AgCl.

Thus, the mass of the solid product (AgCl) produced is 21.95 g

Answer:

[tex]0.0000708\ \text{mol/L}[/tex]

Explanation:

The nitrate concentration of the sample = [tex]4.39\ \text{mg/L}=4.39\times 10^{-3}\ \text{g/L}[/tex]

Molar mass of [tex]NO^-_3=62.0049\ \text{g/mol}[/tex]

The molar concentration is obtained when we divide the concentration by its molar mass in the approriate units.

[tex]\dfrac{4.39\times 10^{-3}}{62.0049}=0.0000708\ \text{mol/L}[/tex]

The molar concentration is [tex]0.0000708\ \text{mol/L}[/tex]

Here is the full question:

A chemistry graduate student was given 500 mL of a 1.60 M hydrocyanic acid (HCN) solution. Hydrocyanic acid is a weak acid with [tex]K_a = 4.9 \times 10^{-10}[/tex]. What mass of KCN should the student dissolve in the HCN solution to turn it into a buffer with pH  = 9.16?

Answer:

36.85 g

Explanation:

From the given information above:

Recall that  number of moles of HCN = mass of HCN / molar mass of HCN= mass of HCN / molar mass of HCN

Therefore;

the number of moles of HCN =  [tex]\dfrac{500 \times 1.60}{1000}[/tex]

the number of moles of HCN = [tex]\dfrac{800}{1000}[/tex]

the number of moles of HCN =  0.8

The acid dissociation constant [tex]K_a[/tex] = [tex]4.9 \times 10^{-10}[/tex]

Thus the pKa = [tex]- log (4.9 \times 10^{-10})[/tex]

pKa = 9.31

However, the pH is given as:

[tex]pH = pKa + log \bigg ( \dfrac{KCN}{HCN} \bigg )[/tex]

[tex]9,16 =9.31 + log \bigg ( \dfrac{KCN}{0.8} \bigg )[/tex]

[tex]9,16 -9.31 =log \bigg ( \dfrac{KCN}{0.8} \bigg )[/tex]

[tex]-0.15 =log \bigg ( \dfrac{KCN}{0.8} \bigg )[/tex]

KCN = 0.566 mol

The standard molar mass of KCN = 65.11 g/mol

Thus, the mass of KCN = number of moles of KCN × molar mass of KCN

the mass of KCN = 0.566 × 65.11

the mass of KCN that the student needs to dissolve in HCN is =  36.85 g

The mass percent of water in nickel (II) sulfate hexahydrate is 41.129 %.

The chemical formula of nickel (II) sulfate hexahydrate is NiSO₄.6H₂O.

The mass of 1 mole of NiSO₄.6H₂O is:

[tex]mNiSO_4.6H_2O = mNi + mS + 10mO + 12mH \\= 58.69 g + 32.07 g + 10 \times 16.00 g + 12 \times 1.01 g = 262.88 g[/tex]

The mass of H₂O in 1 mole of NiSO₄.6H₂O is:

[tex]mH_2O = 6 \times (2mH + mO) = 6 \times (2 \times 1.01 g + 16.00 g) = 108.12 g[/tex]

The mass percent of H₂O in NiSO₄.6H₂O is:

[tex]\% H_2O = \frac{mH_2O}{mNiSO_4.6H_2O} \times 100 \% = \frac{108.12 g}{262.88 g} \times 100 \% = 41.129 \%[/tex]

The mass percent of water in nickel (II) sulfate hexahydrate is 41.129 %.

You can learn more about percent composition here: https://brainly.com/question/17505281

Answer:

a

Explanation:

Answer:

14.9%m/m

Explanation:

The percent m/m concentration of a solution (%m/m) indicates the grams of solute there are in 100 g of solution. It can be calculated as follows:

[tex]%m/m= \frac{mass of solute (g)}{mass of solution(g)} x 100[/tex]%m/m= mass of solute(g)/mass of solution(g) x 100

As the solution is composed by solute + solvent, the mathematical expression can be transformed in:

[tex]%m/m= \frac{mass of solute (g)}{mass of solution(g)} x 100[/tex]%m/m= mass of solute(g)/(mass of solute + mass of solvent (g) )x 100

         = 24.34 g[tex]%m/m= \frac{mass of solute (g)}{mass of solution(g)} x 100[/tex]/(24.34 g + 138.87 g) x 100

         = 24.34 g/(163.21 g) x 100

         = 14.9%

[tex]%m/m= \frac{mass of solute (g)}{mass of solution} x 100 = \frac{mass of solute (g)}{mass of solute (g) + mass of solvent (g)}[/tex]

Answer:

Mass = 149g

Explanation:

N3 = 3x14u = 42

H12 = 12x1u = 12

P = 1x31u = 31

O4 = 4x16u = 64

42+12+31+64 = 149g

Answer:

Paper, some plastics, frosted glass, etc.

Explanation:

Answer:

2 e⁻ + 4 H⁺(aq) + MnO₂(s) → Mn²⁺(aq) + 2 H₂O(l)

Explanation:

Let's write the half-reaction for the reduction of solid manganese dioxide MnO₂ to manganese ion Mn²⁺ in acidic aqueous solution.

MnO₂(s) → Mn²⁺(aq)

To balance the oxygen atoms, we will add 2 moles of water on the right side. To compensate for the hydrogen atoms added, we will add 4 hydrogen ions on the left side.

4 H⁺(aq) + MnO₂(s) → Mn²⁺(aq) + 2 H₂O(l)

Finally, we will balance the charges by adding 2 electrons on the left side.

2 e⁻ + 4 H⁺(aq) + MnO₂(s) → Mn²⁺(aq) + 2 H₂O(l)

Answer:

Molecules are moving the fastest and are the farthest apart in the gaseous phase.

Explanation:

Answer:

C Mesosphere

Explanation:

the meteors will travel through the exosphere and thermosphere without much trouble due to the lack of air in those layers but when they hit the middle layer which is the mesosphere there are enough gases to cause friction and create heat burn up in the mesosphere

(I did research on a helpful site! I hope this helps)

:)

Answer:

its polar

Explanation:

Answer:

I got e but you might want to wait for someone else to answer it just incase...

Answer:

Magma cooling = metamorphic rock formation

Explanation:

Did you mean formation not folio?

Answer:

Explanation:B storing waste materials

Answer:

B) Group 1 and 17

Explanation:

alkali metals and the halogens are the most reactive because of valence electrons

Answer:

circulatory and respiratory

Explanation:

your welcome :)

Answer:

6.79 litres

Explanation:

Potassium dichromate is K2Cr2O7

Its molar mass = 294.18 g/mol

If,

1 mole = 294.18 g

3 mole = 3 x 294.18 g

= 882.54 g

Solubility of K2Cr2O7 is

4.9 g/100 mL at 0⁰c

13 g/100 mL at 20⁰c

102 g/100 mL at 100⁰c

No specific temperature is given so I have used 20⁰C since it is close to room temperature.

at 20⁰C:

13 g of K2Cr2O7 would dissolve in = 100 mL

So 1 g of K2Cr2O7 dissolves in = (100/13)

= 7.692

882.54 g of K2Cr2O7 dissolves in = 882.54 x 7.692

= 6788.59mL

We convert to litres

= 6.79 L

Answer:

See explanation

Explanation:

a) Look at the electronic configuration of both species;

Cu^2+- [Ar]  3d9 4s0

Co^2+- [Ar]  3d7 4s0

We  can now see that a Jahn Teller effect occurs in [CuCl4]2– due to its d9 configuration. This  Jahn-Teller distortion causes the symmetry of  [CuCl4]2–  to change from tetrahedral  T

d  to trigonal pyramidal  C3v.

b) This is a consequence of Jahn-Teller effect in [CoF6]3– which makes the Co-F bonds lie along the z-axis and become elongated in comparison  to the remaining four Co-F bonds

Explanation:

Then there is no net charge separation. a BH3 b CHCl3 c C2H2 d NH3. Optionally the ... Oxygen O2 c. ... BH3 2. Com Bh3 Polar Or Nonpolar In the case of non polar molecules dispersion forces or London forces are present between them.

The polar molecules is NO.

A polar molecule is one that has one end that is slightly positive and the other end that is slightly negative. Ionic or polar covalent bonds can form in polar molecule. A dipole is a molecule that has two poles. The dipole moment is the outcome of measuring the amount of polarity in a molecule.

NO molecule, In the periodic table, nitrogen is to the right of oxygen. Nitrogen has a lower electronegative potential than oxygen. All N-O bonds are polar, with the oxygen atom having a higher electron density. The uneven distribution of electrons in the NO molecule is quite minor. When a molecule is non-polar, the electrons are shared evenly, resulting in a non-polar bond, or the polar bonds are symmetric. So, oxygen, nitrogen and boron trihydride molecules are non-polar molecule.

Hence the correct option is D.

To know more about polar molecule, here,

https://brainly.com/question/11405437

#SPJ2

Answer:

λ [Wavelength] = 3.04357825 m [meters]

Explanation:

Given a frequency, to find the wavelength, divide the speed of light by the frequency. Wavelength = Speed Of Light In Seconds / Frequency .

Wavelength in meters is: λ = 299,792,458 m/s / f Hz .

Then substitute in the frequency to find the wavelength: λ = 299,792,458 m/s / f Hz → λ = 299,792,458 m/s / 9.85 × 10^7 Hz → λ = 2.99792458 × 10^8 m/s / 9.85 × 10^7 → λ = 2.99792458 × 10^8 m / 9.85 × 10^7 → λ = 29.9792458 / 9.85 m → λ = 3.04357825 m

Answer:

heterogeneous mixture

Explanation:

I'm not sure what halo halo or buko is but with mixed nuts you can see the mixture elements so that would be heterogeneous.

If you can't see the individual pieces in a mixture like ex: milk. that is a homogenous mixture.

Answer:

7.09 cm³

Explanation:

From the question given above, the following data were obtained:

Density of Germanium = 5.32 g/cm³

Mass of Germanium = 37.72 g

Volume of Germanium =?

The density of a substance is simply defined as the mass of the substance per unit volume of the substance. Mathematically it is expressed as:

Density = mass / volume

Thus, with the above formula, we can obtain the volume of Germanium as shown below:

Density of Germanium = 5.32 g/cm³

Mass of Germanium = 37.72 g

Volume of Germanium =?

Density = mass /volume

5.32 = 37.72 / volume

Cross multiply

5.32 × Volume = 37.72

Divide both side by 5.32

Volume = 37.72 / 5.32

Volume of Germanium = 7.09 cm³

Answer:

(a) Map view and (b) cross-section view of location results for lower and upper groups overlapping with faults. Green dashed lines, magenta dots and blue dots refer to preexisting faults, lower events and upper events, respectively. (For interpretation of the references to color in this figure legend, the reader is referred to the web version of this article.)

(a) Map view and (b) cross-section view of location results for lower and upper groups overlapping with faults. Green dashed lines, magenta dots and blue dots refer to preexisting faults, lower events and upper events, respectively. (For interpretation of the references to color in this figure legend, the reader is referred to the web version of this article.)

Answer:

J. J. Thomson - Electrons

John Dalton - Atoms

Ernest Rutherford - Protons

James Chadwick - Neutrons

Answer:

Look at the picture :)

Answer:

[tex]M=1.02M[/tex]

Explanation:

Hello.

In this case, since the molarity of a solution is computed as the moles of solute over volume of solution:

[tex]M=\frac{n_{solute}}{V}[/tex]

Since the volume of the solution is 257 mL or also 0.257 L, we compute the moles of solute, which is magnesium nitrate (molar mass = 148.3 g/mol), as shown below:

[tex]n_{solute}=39.0gMg(NO_3)_2*\frac{1molMg(NO_3)_2}{148.3 gMg(NO_3)_2}=0.263molMg(NO_3)_2[/tex]

Thus, the required molarity turns out:

[tex]M=\frac{0.263molMg(NO_3)_2 }{0.257L}\\ \\M=1.02M[/tex]

Best regards.

Answer:

E = 2.80×10⁻¹⁶ j

E = 5.37×10⁻¹⁷j

Explanation:

Given data:

Frequency of photon = 4.23 ×10¹⁷ Hz

Energy of photon = ?

Solution:

Formula:

E = h× f

E = 6.63×10⁻³⁴ js ×4.23 ×10¹⁷ Hz

Hz = s⁻¹

E = 28.0×10⁻¹⁷ j

E = 2.80×10⁻¹⁶ j

2)

Given data:

Frequency of photon = 8.10×10¹⁶ Hz

Energy of photon = ?

Solution:

E = h× f

E = 6.63×10⁻³⁴ js ×  8.10×10¹⁶ Hz

Hz = s⁻¹

E = 53.7×10⁻¹⁸j

E = 5.37×10⁻¹⁷j