How does the terminal voltage compare to the load voltage? Why? What would happen if the battery terminals 1 and 35 are connected directly with a wire?

The given problem states that a cell can be 1.9μm in diameter with a cell wall 40 nm thick. The density (mass divided by volume) of the wall material is the same as that of pure water.

Therefore, the mass (in mg ) of the cell wall, assuming the cell to be spherical and the wall to be a very thin spherical shell is to be determined. We know that the volume of a spherical cell is:V = 4/3πr³where r is the radius of the cell. The volume of a spherical shell is:V = 4/3π(r₂³ - r₁³)where r₁ and r₂ are the inner and outer radii of the spherical shell, respectively.

Let's find the volume of the cell first. We are given the diameter of the cell, but we need the radius.

r = d/2 = 1.9μm/2 = 0.95μm = 0.95 x 10⁻⁶m So, r = 0.95 x 10⁻⁶m

The volume of the cell is: V = 4/3πr³= 4/3 x π x (0.95 x 10⁻⁶)³= 3.54 x 10⁻ⁱ⁵m³

Next, we find the outer radius of the cell wall. The outer radius of the cell wall will be the sum of the radius of the cell and the thickness of the cell wall. r₂ = r + t where t is the thickness of the cell wall.

r₂ = 0.95 x 10⁻⁶m + (40 x 10⁻⁹)m= 0.990 x 10⁻⁶m

V = 4/3π(r₂³ - r₁³)= 4/3π[(0.990 x 10⁻⁶)³ - (0.95 x 10⁻⁶)³]= 2.93 x 10⁻²¹m³

The mass of the cell wall is the product of the volume and the density of water (which we are told is the same as the density of the cell wall material).ρ = m/V where ρ is the density of water and the cell wall material. The density of water is: ρ = 1000 kg/m³The mass of the cell wall is :

m = ρV= (1000 kg/m³) (2.93 x 10⁻²¹m³)= 2.93 x 10⁻¹⁸kg

To convert kilograms to milligrams, we use:1 kg = 10⁶ ,

2.93 x 10⁻¹⁸kg = 2.93 x 10⁻¹²mg

Thus, the mass of the cell wall in milligrams is

2.93 x 10⁻¹²mg. Answer: 2.93 x 10⁻¹²mg.

To know more about problem visit:

https://brainly.com/question/31611375

#SPJ11

To find the average velocity of the train during the entire trip, we need to calculate the total displacement and the total time taken. Then, we can divide the displacement by the time to obtain the average velocity.

Given:

Speed of the train = 62.0 km/h

Time traveling east = 32.0 min

Time traveling at an angle = 22.0 min

Time traveling west = 42.0 min

We'll first convert the times to hours for consistency:

Time traveling east = 32.0 min * (1 hour / 60 min) = 0.5333 hours (rounded to four decimal places)

Time traveling at an angle = 22.0 min * (1 hour / 60 min) = 0.3667 hours (rounded to four decimal places)

Time traveling west = 42.0 min * (1 hour / 60 min) = 0.7000 hours (rounded to four decimal places)

Now, let's calculate the total displacement in the x-direction (east-west) and the y-direction (north-south) using trigonometry:

Displacement in the x-direction:

East = 62.0 km/h * 0.5333 hours = 33.087 km (rounded to three decimal places)

West = 62.0 km/h * 0.7000 hours = 43.400 km (rounded to three decimal places)

Net displacement in the x-direction = West - East = 43.400 km - 33.087 km = 10.313 km (rounded to three decimal places)

Displacement in the y-direction:

North = 62.0 km/h * 0.3667 hours * sin(50.0°)

North ≈ 11.785 km (rounded to three decimal places)

Now, we can find the total displacement (magnitude and angle) using the Pythagorean theorem and inverse tangent:

Magnitude of displacement (d):

d = sqrt((displacement_x)^2 + (displacement_y)^2)

d = sqrt((10.313 km)^2 + (11.785 km)^2)

d ≈ 15.702 km (rounded to three decimal places)

Angle of displacement (θ):

θ = arctan(displacement_y / displacement_x)

θ = arctan(11.785 km / 10.313 km)

θ ≈ 48.694° (rounded to three decimal places)

Therefore, the (a) magnitude of the average velocity during the trip is approximately 15.702 km, and the (b) angle of the average velocity is approximately 48.694°.

To know more about average velocity click this link -

brainly.com/question/28512079

#SPJ11

To calculate the magnitude and direction of the given vector, follow these steps:Step 1: Use the Pythagorean theorem to find the magnitude of the vector The magnitude of a vector is given by:|v| = √(vx² + vy²)where vx and vy are the x and y components of the vector respectively.|v| = √((-25.5)² + (38.0)²) = √(650.25 + 1444) = √2094.25|v| ≈ 45.81 units

Step 2: Use trigonometry to find the direction of the vector The direction of a vector is given by the angle it makes with the positive x-axis.θ = tan⁻¹(vy / vx)θ = tan⁻¹(38.0 / (-25.5)) = tan⁻¹(-1.4902)θ ≈ -56.5° (rounded to one decimal place)The direction of the vector is counterclockwise from the positive x-axis, so the angle is negative. Therefore, the direction of the vector is -56.5°.Given that a vector has an x component of −25.5 units and a y component of 38.0 units.To find the magnitude and direction of this vector:

Step 1: Find the magnitude of the vector The magnitude of a vector is given by:|v| = √(vx² + vy²)where vx and vy are the x and y components of the vector respectively.|v| = √((-25.5)² + (38.0)²) = √(650.25 + 1444) = √2094.25|v| ≈ 45.81 units Therefore, the magnitude of the vector is approximately 45.81 units.Step 2: Find the direction of the vector The direction of a vector is given by the angle it makes with the positive x-axis.θ = tan⁻¹(vy / vx)where θ is the angle in degrees.vy = 38.0 units and vx = -25.5 units.θ = tan⁻¹(38.0 / (-25.5)) = tan⁻¹(-1.4902)θ ≈ -56.5° (rounded to one decimal place)The direction of the vector is counterclockwise from the positive x-axis, so the angle is negative. Therefore, the direction of the vector is -56.5°.Hence, the magnitude of the vector is approximately 45.81 units and the direction of the vector is counterclockwise from the positive x-axis and is approximately -56.5°.

To know more vector visit:-

https://brainly.com/question/30958460

#SPJ11

To determine the time it takes for a chemical signal to reach the brain, we can use the formula: distance = rate × time. Let's consider the given data:

The rate at which the signal will travel is stated as 100 m/s, and the distance traveled is the height of the individual, which is given as 1.75 m.

Substituting these values into the formula, we obtain the equation: 1.75 = 100 × time. Our goal is to isolate the variable "time" on one side of the equation.

To do this, we divide both sides of the equation by 100: 1.75/100 = time.

Simplifying the equation, we find: time = 0.0175 s.

Therefore, it takes 0.0175 seconds for the chemical signal to reach the brain, assuming a rate of 100 m/s. To express this time in milliseconds, we multiply 0.0175 by 1000, giving us 17.5 milliseconds.

In conclusion, based on the given rate of 100 m/s and a distance of 1.75 meters, the chemical signal takes approximately 17.5 milliseconds to reach the brain.

distance https://brainly.com/question/2087168

#SPJ11

The amount of heat required to convert 12.0 g of ice at −10.0°C to steam at 100.0°C is 37492 J.

The amount of heat required to convert 12.0 g of ice at −10.0°C to steam at 100.0°C is calculated using the formula Q = m × ΔH where Q is the amount of heat required, m is the mass of the substance being heated or cooled, and ΔH is the heat of fusion or heat of vaporization.

For water, the heat of fusion is 334 J/g and the heat of vaporization is 2260 J/g. In order to determine the heat required for the conversion of 12.0 g of ice at -10.0°C to steam at 100.0°C, we must first calculate the heat needed for the ice-to-water transformation, followed by the heat needed for the water-to-steam transformation.
First, the amount of heat required to convert the ice to water:

Q1 = m × ΔHfus = 12.0 g × 334 J/g = 4008 J

Next, the amount of heat required to heat the water from −10.0°C to 100.0°C:

Q2 = m × Cp × ΔT = 12.0 g × 4.18 J/g∘C × (100.0°C − (−10.0°C)) = 6264 J

Finally, the amount of heat required to convert the water to steam:

Q3 = m × ΔHvap = 12.0 g × 2260 J/g = 27120 J

The total amount of heat required is therefore:

Q = Q1 + Q2 + Q3 = 4008 J + 6264 J + 27120 J = 37492 J

Therefore, the amount of heat required to convert 12.0 g of ice at −10.0°C to steam at 100.0°C is 37492 J.

Learn more about heat at: https://brainly.com/question/934320

#SPJ11

the frequency of the beats between the wave coming from the source and the echo wave coming from the mountain is approximately 25 Hz.

To calculate the frequency of the beats between the wave coming from the source and the echo wave coming from the mountain, we need to consider the Doppler effect and the speed of sound.

The Doppler effect describes the change in frequency perceived by an observer due to relative motion between the source of the waves and the observer. The formula for the observed frequency (f') due to the Doppler effect is:

f' = (v + v₀) / (v + vₛ) * f₀

where:

f' is the observed frequency,

v is the speed of sound in the medium,

v₀ is the velocity of the observer relative to the medium (positive if moving towards the source),

vₛ is the velocity of the source relative to the medium (positive if moving away from the observer),

f₀ is the frequency emitted by the source.

Given:

Air temperature = 29°C (which we can convert to Kelvin for use in the speed of sound calculation),

Observer walking towards the mountain at a speed of 17 m/s (v₀ = -17 m/s),

Source emitting sound waves at a frequency of 680 Hz (f₀).

To calculate the beats frequency, we also need the speed of sound in air. The speed of sound in air depends on temperature and can be calculated using the formula:

v = 331.5 * sqrt(1 + (T/273.15))

where:

v is the speed of sound in m/s,

T is the temperature in Kelvin.

Converting the temperature from Celsius to Kelvin:

T = 29°C + 273.15 = 302.15 K

Calculating the speed of sound:

v = 331.5 * sqrt(1 + (302.15 K/273.15))

v ≈ 331.5 * sqrt(2.108)

v ≈ 331.5 * 1.452

v ≈ 481.88 m/s

Now, we can calculate the observed frequency using the Doppler effect equation:

f' = (v + v₀) / (v + vₛ) * f₀

f' = (481.88 m/s + (-17 m/s)) / (481.88 m/s + 0 m/s) * 680 Hz

f' = 464.88 / 481.88 * 680 Hz

f' ≈ 655.02 Hz

The observed frequency (f') due to the superposition of the wave from the source and the echo wave from the mountain is approximately 655.02 Hz.

To calculate the frequency of the beats, we need to find the difference between the observed frequency and the original frequency:

Beats frequency = |f' - f₀|

Beats frequency = |655.02 Hz - 680 Hz|

Beats frequency ≈ 25 Hz

Therefore, the frequency of the beats between the wave coming from the source and the echo wave coming from the mountain is approximately 25 Hz.

Here you can learn more about echo wave

https://brainly.com/question/16046745#

#SPJ11  

Therefore, her average speed over the entire trip is 16.7 m/s . Therefore, her average velocity over the entire trip is 0 m/s.

Given the height of a person (approximately 1.6 m) and that the nerve impulse travels at uniform speed. Let's find the answer to the following questions.

(a) What is her average speed over the entire trip?Average speed = Total distance travelled / Total time takenTotal distance travelled = 10 meters (5 meters in each direction)

Total time taken

= (2 × 0.1 s) + (2 × 0.2 s) + (2 × 0.3 s)

= 0.6 s

Average speed = 10 / 0.6

= 16.7 m/s

Therefore, her average speed over the entire trip is 16.7 m/s

.(b) What is her average velocity over the entire trip?

Average velocity = Total displacement / Total time taken

Total displacement = 0 (since she ends up at her starting position)

Total time taken = 0.6 s

Average velocity = 0 / 0.6 = 0

Therefore, her average velocity over the entire trip is 0 m/s.

To know more about speed visit;

brainly.com/question/17661499

#SPJ11

Charge q1 = 6.96 n C Charge q2 = 3.98 n C Distance between two charges r = 1.94 m the electrostatic force between two charges can be calculated using Coulomb's Law.

Coulomb's Law states that the electrostatic force between two charged particles is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.

Mathematically,

[tex]F = k(q1q2/r^2),[/tex]

where k is Coulomb's constant, q1 and q2 are the magnitudes of two-point charges, and r is the distance between them.

Coulomb's constant has a value of [tex]8.99 x 10^9 Nm^2/C^2.[/tex]

Substituting the given values in Coulomb's law, we get;

[tex]F = (8.99 × 10^9 N·m^2/C^2)(6.96 × 10^-9 C)(3.98 × 10^-9 C) / (1.94 m)^2F = 1.48 × 10^-3 N[/tex]

The magnitude of the electrostatic force that one charge exerts on the other is

[tex]1.48 × 10^-3 N.[/tex]

the magnitude of the electrostatic force that one charge exerts on the other is

[tex]1.48 × 10^-3 N.[/tex]

To know more about electrostatic visit:

https://brainly.com/question/16489391

#SPJ11

(1) According to the Inverse-Square Law, the apparent brightness (flux) of a light source decreases as the distance from the source increases. The relationship is inversely proportional to the square of the distance.

If the distance to a lightbulb increases by a factor of 5, the bulb's apparent brightness (flux) would decrease by a factor of 5 squared, which is 25.

Therefore, the correct answer is D) becomes 25 times less.

(2) Stars of spectral class M do not show strong lines of hydrogen in their spectra because their surfaces are so cool that most hydrogen is in the ground state.

In stars with cooler surface temperatures, hydrogen atoms are more likely to be in the ground state rather than excited states. As a result, they emit fewer photons at specific wavelengths corresponding to hydrogen spectral lines.

Therefore, the correct answer is B) their surfaces are so cool that most hydrogen is in the ground state.

(3) Cool stars can be very luminous if they are very large.

The luminosity of a star is related to its size and temperature. While a star's surface temperature influences its color and spectral class, the size (radius) of a star affects its total energy output. Larger stars have a greater surface area, allowing them to emit more energy and appear brighter or more luminous, even if their temperatures are relatively cool.

Therefore, the correct answer is C) large.

To know more about Inverse-Square Law click this link -

brainly.com/question/30562749

#SPJ11

The total change in the planet's velocity is approximately -45,100 m/s, and its average acceleration during the interval is approximately -0.067 m/s². The negative sign indicates a reversal in direction for both velocity and acceleration.

To find the total change in the planet's velocity and its average acceleration, we can use the following formulas:

(a) Total change in velocity = Final velocity - Initial velocity

(b) Average acceleration = Total change in velocity / Time interval

Given:

Initial velocity (v1) = +23.5 km/s

Final velocity (v2) = -21.6 km/s

Time interval (t) = 2.17 years

First, let's convert the velocities from km/s to m/s:

Initial velocity (v1) = +23.5 km/s × 1000 m/km  ×  1 s/1000 ms

                             = +23,500 m/s

Final velocity (v2) = -21.6 km/s  ×  1000 m/km  ×  1 s/1000 ms

                             = -21,600 m/s

(a) Total change in velocity = v2 - v1

Total change in velocity = -21,600 m/s - (+23,500 m/s)

Total change in velocity = -45,100 m/s

(b) Average acceleration = Total change in velocity / Time interval

Average acceleration = (-45,100 m/s) / (2.17 years  ×  365 days/year  ×  24 hours/day  ×  3600 s/hour)

Average acceleration ≈ -0.067 m/s²

Therefore, the total change in the planet's velocity is approximately -45,100 m/s, and its average acceleration during the interval is approximately -0.067 m/s². The negative sign indicates a reversal in direction for both velocity and acceleration.

Learn more about Acceleration & Velocity from the given link:

https://brainly.com/question/30048985

#SPJ11

To calculate the amount of heat that is necessary to raise the temperature of 0.8 kg ice from 0 °C to 30.0 °C, we need to consider the different stages in which heat is transferred in the process.

Stages in the process1. The ice has to be melted to get it to 0°C before any further heating can raise its temperature.2. The water that is formed from the melting ice then has to be heated to reach 30°C.3. Finally, the heat that is required to increase the temperature of the water is calculated by using the formula:

Heat = mass × specific heat capacity × temperature change.

The specific heat capacity of water is given to be c water = 4186 J kg-1 °C-1,

and the latent heat of fusion for ice is
L water = 334 × 103 J kg-1.0.8 kg of ice at 0°C

needs to be heated to 0°C first, which will require the latent heat of fusion:

L = mlL = 0.8 × 334 × 103L = 267.2 × 103 J

Heat required to raise the temperature of the melted ice to

30°C:Q = mcΔTQ = 0.8 × 4186 × (30 - 0)Q = 100464 J

Total heat required to raise the temperature of

0.8 kg of ice from 0°C to 30°C:Qtotal = L + Q total = 267.2 × 103 + 100464Q

total = 367664 , it takes 367664 J of heat to raise the temperature of 0.8 kg of ice from 0°C to 30°C.

To know more about necessary visit:

https://brainly.com/question/31550321

#SPJ11

A current of 0.320 A should flow through the heating coils if 490 µJ of energy is to be stored in them.

To find the current flowing through the heating coils of a hair dryer, if 490 µJ of energy is to be stored in them, we need to first find the resistance offered by the coils. With the resistance value known, we can use Ohm's law to find the current flowing through the coils.

The resistance offered by the heating coils can be given by the formula: R=ρL/A

Since the diameter of the coils is 0.800 cm, the radius, r = d/2 = 0.400 cm = 0.00400 m.

The area of cross-section of the coils, A = πr² = π(0.00400)² m² = 5.02 x 10⁻⁵ m²

The length of the coils, L = 1.00 m

The resistivity of the material of the heating coils, ρ = 5.0 x 10⁻⁸ Ωm

Therefore, the resistance of the heating coils, R = 5.0 x 10⁻⁸ x 1.00 / 5.02 x 10⁻⁵  = 0.001002 Ω

We know that the energy stored in the coils, W = 1/2 LI², where L is the inductance of the coils, and I is the current flowing through them.

Rearranging the formula, we get, I = sqrt(2W/L)

To find the value of inductance, L, we use the formula:

L = µ0n²A/L,

where

µ0 = 4π x 10⁻⁷ Tm/A is the permeability of free space,

n is the number of turns in the coils, and l is the length of the coils.

µ0 = 4π x 10⁻⁷ Tm/An = 450

l = 1.00 m

Area of cross-section, A = 5.02 x 10⁻⁵  m²

Therefore, inductance of the coils, L = 4π x 10⁻⁷  x (450/1.00)² x 5.02 x 10⁻⁵  = 0.01496 H

Thus, the current flowing through the coils, I = sqrt(2 x 490 x 10⁻⁶  / 0.01496) = 0.320 A (correct to 3 significant figures)

Therefore, the current flowing through the heating coils of the hair dryer is 0.320 A when 490 µJ of energy is stored in them.

Thus, we can conclude that a current of 0.320 A should flow through the heating coils if 490 µJ of energy is to be stored in them.

To know more about current, visit:

https://brainly.com/question/31686728

#SPJ11

To find the speed of the ball before it fell from the edge of the wall, we can use the principles of conservation of energy.

Initially, when the ball is rolling on the vertical wall, it possesses only potential energy due to its height. At the edge of the wall, the ball has zero potential energy. As it falls, this potential energy is converted into kinetic energy.

The potential energy at the top of the wall is given by PE = m * g * h, where m is the mass of the ball, g is the acceleration due to gravity, and h is the height of the wall.

At the bottom of the fall, all the potential energy is converted into kinetic energy. The kinetic energy is given by KE = (1/2) * m * v^2, where v is the velocity of the ball.

Setting the potential energy at the top of the wall equal to the kinetic energy at the bottom of the fall, we have:

m * g * h = (1/2) * m * v^2.

Simplifying the equation, we can solve for v:

v = sqrt(2 * g * h).

Substituting the given values, we have:

v = sqrt(2 * 9.8 m/s^2 * 1.8 m) ≈ 6.04 m/s.

Therefore, the speed of the ball before it fell from the edge of the wall was approximately 6.04 m/s.

To know more about conservation of energy, please visit

https://brainly.com/question/13949051

#SPJ11

The force on q2 due to the magnetic field is in the direction opposite to v (Arrow B). The magnitude of the velocity of q2 is |v| = 0.809 m/s (Option 5). The sign of the charge q3 is negative.

When a charged particle moves through a magnetic field, it experiences a magnetic force given by the equation F = qvBsinθ, where F is the magnetic force, q is the charge of the particle, v is its velocity, B is the magnetic field, and θ is the angle between the velocity vector and the magnetic field vector.

In this scenario, q2 has a charge of -2.1 C and is moving in the (+x+y)/2 direction. The magnetic field B is given as 5.1 T in the x direction. The object feels a magnetic force of magnitude 6.13 N.

Since the force is in the opposite direction of the velocity (v), the force is in the direction opposite to v (Arrow B).

To determine the magnitude of the velocity (v), we can rearrange the formula for the magnetic force to solve for v. Substituting the given values of the force (6.13 N), charge (-2.1 C), and magnetic field (5.1 T), we can solve for |v|, which is approximately 0.809 m/s.

For the second part of the question, the object with an unknown charge enters a region with a magnetic field B = -5.91 T in the z direction. The path taken by the object suggests that it experiences a force in the negative y direction. This force direction indicates that the charge q3 must be negative.

Learn more about magnetic field from the given link https://brainly.com/question/14848188

#SPJ11.

1. The object will have dropped approximately 0.459 meters. 2. The total time is t_total = 2t = 2u / 9.8 3. the initial speed of the ball was approximately 43.1 m/s.

To find the distance an object will have dropped when it reaches an instantaneous speed of 3 m/s, we can use the equations of motion. Given that the object starts from rest and the acceleration due to gravity is 9.8 m/s², we can use the equation v² = u² + 2as, where v is the final velocity, u is the initial velocity (0 m/s), a is the acceleration (-9.8 m/s²), and s is the distance.

Rearranging the equation, we have s = (v² - u²) / (2a). Plugging in the values, we get s = (3² - 0²) / (2 * -9.8) = 0.459 m.

Therefore, the object will have dropped approximately 0.459 meters.

For the second question, if a ball is thrown upward to a height of 209 m and then falls back to Earth, we can use the equation h = ut + (1/2)at², where h is the height, u is the initial velocity, t is the time, and a is the acceleration due to gravity (-9.8 m/s²).

Since the ball reaches its maximum height when its final velocity is 0 m/s, we can find the time it takes to reach that point. Using the equation v = u + at and plugging in the values, we get 0 = u - 9.8t, which gives us t = u / 9.8.

To find the total time in the air, we double the time it takes to reach the maximum height, so the total time is t_total = 2t = 2u / 9.8.

Plugging in the values, we get 209 = u(u / 9.8) + (1/2)(-9.8)(u / 9.8)².

Simplifying the equation, we have 209 = u² / 9.8 - (u² / 9.8²).

Multiplying through by 9.8², we get 209 * 9.8² = u² - u² / 9.8.

Simplifying further, we have 209 * 9.8² = 8.8u².

Dividing by 8.8, we find u² = (209 * 9.8²) / 8.8.

Taking the square root, we obtain u ≈ 43.1 m/s.

Therefore, the initial speed of the ball was approximately 43.1 m/s.

Learn more about initial speed from below link

https://brainly.com/question/29110645

#SPJ11

Velocity of the book at the top of the window:At a height h= 2.3 m, the book has a velocity, v1 when it passes the top of the window on a lower floor.

Let's find this value of v1.Using the first equation of motion, we can find the velocity of the book as:v = u + at Where, u = initial velocity = 0a = acceleration due to gravity = 9.8 m/s2t = time taken = ?s Using v1 as the final velocity, the distance covered, s = 2.3 m is given as:2.3 = 0 + 1/2 (9.8) t²1.15 = 4.9t²t² = 1.15 / 4.9t = 0.533 sv1 = u + at = 0 + 9.8 (0.533) = 5.23 m/s Velocity of the book at the top of the window is 5.23 m/s.b) Velocity of the book at the bottom of the window:Using the first equation of motion, we can find the velocity of the book as:v = u + at Where, u = initial velocity = 0a = acceleration due to gravity = 9.8 m/s2t = time taken = ?s

Using v2 as the final velocity, the distance covered, s = 3.8 m is given as:3.8 = 0 + 1/2 (9.8) t²1.9 = 4.9t²t² = 1.9 / 4.9t = 0.687 sv2 = u + at = 0 + 9.8 (0.687) = 6.74 m/s Velocity of the book at the bottom of the window is 6.74 m/s.c) Time taken to cross the window:To find the time taken to cross the window, we need to subtract the time it takes to travel 1.5 m from the total time taken using the first equation of motion as discussed earlier.t = 0.533 + 0.687 = 1.22 sTo cross the window, the book takes 1.22 - 1.5/5.23 = 0.995 s or 1.0 s (approx).Therefore, the time taken to cross the window is a long answer of 1.0 s.

To know more about equation of motion visit:-

https://brainly.com/question/29278163

#SPJ11

Their weight remains consistent at approximately 588 N.

Before the elevator starts moving, the passenger's weight is equal to their mass multiplied by the acceleration due to gravity. With a mass of 60 kg and using a standard value of 9.8 m/s² for gravity, the passenger's weight before the elevator starts moving is approximately 588 N.

While the elevator is speeding up, the passenger's weight remains the same as before. The force of gravity acting on the passenger does not change during this period, so their weight remains constant at approximately 588 N.

After the elevator reaches its cruising speed of 10 m/s, the passenger's weight also remains the same. Once again, the force of gravity acting on the passenger does not change, resulting in a weight of approximately 588 N.

Throughout the entire process, the passenger's weight remains constant because the force of gravity acting on them does not change. The acceleration of the elevator does not affect the force of gravity experienced by the passenger.

To know more about weight:

https://brainly.com/question/31659519

#SPJ11

The centripetal force on the sensor is 1600 * π² kg * m/s² and neglecting any backing up and any change in radius due to wear, the tires make approximately 6.52 × 10⁷ revolutions.

To calculate the centripetal force on the sensor attached at the end of the wind turbine blade, we can use the formula:

F = m * (v² / r)

Where, F is the centripetal force, m is the mass of the sensor, v is the linear velocity of the sensor, and r is the radius of the circular path.

As per data:

Mass of the sensor (m) = 4.0 kg, Linear velocity (v) = 2.00 rev/s (convert to m/s), Radius of the circular path (r) = 100.0 m

First, let's convert the linear velocity from revolutions per second to meters per second. One revolution is equal to the circumference of the circular path, which is 2 * π * r.

So, the linear velocity can be calculated as:

v = 2 * π * r * (1 rev/s)

v = 2 * π * 100.0 m * (1/1 s)

v = 200 * π m/s.

Now we can substitute the values into the formula:

F = 4.0 kg * ((200 * π m/s)² / 100.0 m)

Simplifying the expression inside the parentheses:

F = 4.0 kg * (40,000 * π² m²/s² / 100.0 m)

Cancelling out the units of meters:

F = 4.0 kg * 400 * π² m/s²

Evaluating the expression:

F = 1600 * π² kg * m/s²

Therefore, the centripetal force is 1600 * π² kg * m/s².

For the second part of the question, we can find the number of revolutions the automobile tires make by using the formula:

Distance travelled (d) = circumference of the tire * number of revolutions

As per data:

Radius of the tire (r) = 0.220 m, Distance travelled (d) = 9.0 × 10⁴ km = 9.0 × 10⁷ m

The circumference of the tire can be calculated as:

Circumference = 2 * π * r

Substituting the given values:

Circumference = 2 * π * 0.220 m

                         = 1.38 m (approximately)

Now we can rearrange the formula and solve for the number of revolutions:

Number of revolutions = Distance travelled / Circumference

Number of revolutions = 9.0 × 10⁷ m / 1.38 m

Number of revolutions ≈ 6.52 × 10⁷ revolutions

Therefore, neglecting any backing up and any change in radius due to wear, the tires make approximately 6.52 × 10⁷ revolutions.

To learn more about centripetal force from the given link.

https://brainly.com/question/20905151

#SPJ11

Complete question is,

Calculate the centripetal force on a 4.0 kg sensor that is attached at the end of a 100.0-m long wind turbine blade that is rotating at 2.00rev/s. An automobile with 0.220 m radius tires travels 9.0×104 km before wearing them out. How many revolutions do the tires make, neglecting any backing up and any change in radius due to wear? revolutions

The hockey puck travels approximately 1.714 meters on the ice after it leaves the spring.

To determine the distance the hockey puck travels on the ice after leaving the spring, we need to consider the work done by the spring and the work done by kinetic friction.

First, let's calculate the work done by the spring. The work done by the spring is equal to the potential energy stored in the spring when compressed:

Potential energy stored in the spring = (1/2)kx²

where k is the spring constant and x is the distance the spring is compressed. Converting the given distance from centimeters to meters, we have:

x = 22.33 cm = 0.2233 m

Substituting the values into the equation:

Potential energy stored in the spring = (1/2)(14.23 N/m)(0.2233 m)² = 0.06924 J

Next, let's calculate the work done by kinetic friction. The work done by friction is equal to the force of friction multiplied by the distance traveled:

Work done by friction = force of friction × distance

The force of friction can be calculated using the coefficient of kinetic friction and the normal force, which is equal to the weight of the puck:

force of friction = coefficient of kinetic friction × normal force

The weight of the puck can be calculated using its mass and the acceleration due to gravity:

weight of the puck = mass × acceleration due to gravity

mass = 170.0 g = 0.1700 kg

acceleration due to gravity = 9.8 m/s²

weight of the puck = 0.1700 kg × 9.8 m/s² = 1.666 N

Now we can calculate the force of friction:

force of friction = 0.02425 × 1.666 N = 0.04034 N

Since the work done by friction is equal to the force of friction multiplied by the distance traveled, we can rearrange the equation to solve for the distance:

distance = work done by friction / force of friction

distance = 0.06924 J / 0.04034 N ≈ 1.714 m

Therefore, the hockey puck travels approximately 1.714 meters on the ice after it leaves the spring.

Learn more about work done at: https://brainly.com/question/28356414

#SPJ11

The direction of the total electric field at corner P of the equilateral triangle is directed towards the left.

The electric field at a point due to a charged particle is the vector sum of the electric fields created by each individual charged particle. In this case, we have two charged particles located at the corners of the equilateral triangle.

l

Since the charged particles have the same charge quantity, the electric fields they create will have the same magnitude. The electric fields at corner P due to each charged particle will have equal magnitudes and will be directed away from the charged particles.

Since the two electric fields are equal in magnitude and opposite in direction, the vector sum of the electric fields at corner P will result in a net electric field directed towards the left. This is because the electric fields created by the two charged particles cancel each other partially, resulting in a resultant electric field directed towards the left.

To learn more about electric field click here : brainly.com/question/19878202

#SPJ11

The kinetic energy of Honda Civic at 30 m/s is 306000 J.The energy required is  0.00235 gallons of gasoline is burnt in getting to 70 mph.The given mass of the Honda Civic = 680 kg, Speed of Honda Civic = 30 m/s, Kinetic Energy (KE)

= (1/2)mv² Where m = mass of the car and v = velocity KE = (1/2)mv²= (1/2)×680×(30)²= 306000 J.

Therefore, the kinetic energy of Honda Civic at 30 m/s is 306000 J.

b) If you begin at a stop and speed up to 70mph, you transform stored chemical energy (in the gas you burn) into kinetic energy.

A gallon of gasoline has about 130 × [tex]10 ∧ 6[/tex] Joules (=130 million Joules) of stored chemical energy.

The stored chemical energy in a gallon of gasoline = 130×10⁶ Joules = 130,000,000 J.

Let x be the number of gallons of gasoline burnt to attain a speed of 70 mph.

Hence,The kinetic energy = chemical energyx × 130,000,000 J = 306,000 Jx = 306000/130000000x = 0.00235 gallons.

Therefore, approximately 0.00235 gallons of gasoline is burnt in getting to 70 mph.

Learn more about kinetic energy  here ;

https://brainly.com/question/999862

#SPJ11

The efficiency of the turbine is 97.79%.

Given,
Flow rate (Q) = 0.5 × 10^-3 m^3/s
Applied force = 5.5 N and 5.125 N
Rotational speed (n) = 25 Hz
Pressure head (h) = 12 m
Radius (r) = 0.3 m
To find, Efficiency of the turbine
We know that the power delivered by a turbine is given by, P = Q × h × g ……………. (1)
Where, g = Acceleration due to gravity = 9.81 m/s^2
The power delivered by the turbine is given by, P = F × V × 2πr × n ……….. (2)
Where, V = Velocity of the water, which is given by Q = A × V ……………. (3)
Where, A = Area of the cross-section of the pipe
Assuming the diameter of the pipe as d, the Area of the cross-section of the pipe (A) = π/4 × d^2 …….. (4)
Substituting equation (3) in equation (1), P = A × V × h × g ……… (5)
Substituting equation (3) in equation (2), P = F × Q ………. (6)
From equations (5) and (6), A × V × h × g = F × Q …….. (7)V = Q / A ………. (8)
Substituting equation (8) in equation (7), A × Q / A × h × g = F × Q ……….. (9)
The efficiency of the turbine is given by,
Efficiency (η) = Power delivered by the turbine / Power supplied to the turbine
Efficiency (η) = P / F × V × 2πr × n
Efficiency (η) = P / F × Q × 2πr × n
Efficiency (η) = h × g / 2π × n × r
To find the efficiency of the turbine,
Substituting the given values,
Efficiency (η) = 12 × 9.81 / 2π × 25 × 0.3
Efficiency (η) = 0.9779 ≈ 97.79%
Therefore, the efficiency of the turbine is 97.79%.

learn more about efficiency from the given link:
https://brainly.com/question/13222283

#SPJ11

Evaluating this expression, we can find the length of the wire, which is equal to the circumference of the coil.

To find the length of the wire from which the coil is made, we can use the formula for torque experienced by a coil in a magnetic field:

τ = BIA,

where τ is the torque, B is the magnetic field strength, I is the current, and A is the area of the coil.

In this case, the torque (τ) is given as 12×10^(-3) N⋅m, the magnetic field (B) is 1.0 T, and the current (I) is 3.2 A. We are looking for the length of the wire, which is related to the area (A) of the coil.

The area of a circular coil with only one turn can be calculated using the formula:

A = πr^2,

Since the coil consists of only one turn, the circumference of the coil is equal to the length of the wire. The circumference can be calculated as:

C = 2πr.

We can rearrange the equation to solve for r:

r = C / (2π).

Substituting this value of r into the formula for the area, we get:

A = π(C / (2π))^2.

12×10^(-3) N⋅m = (1.0 T)(3.2 A)(π(C / (2π))^2).

Simplifying the equation, we find:

12×10^(-3) N⋅m = (1.0 T)(3.2 A)(C / (2π))^2.

Solving for C, we can rewrite the equation as:

C = √[(12×10^(-3) N⋅m) / ((1.0 T)(3.2 A))].

To learn more about  circumference

https://brainly.com/question/27447563

#SPJ11

a) Face area is [tex]3015.93 mm^2[/tex]. b) Spring pressure is 0.116 [tex]N/mm^2[/tex]. c) External balance ratio is 0.625 and Internal balance ratio is 0.25. d) the seal is unbalanced.

a) Face area can be calculated using the formula:

[tex]A = \pi/4 * (D^2 - d^2)[/tex],

where D is the outer diameter and d is the inner diameter.

Substituting the given values,

[tex]A = \pi/4 * (80.0^2 - 60^2) = 3015.93 mm^2.[/tex]

b) Spring pressure can be calculated using the formula:

P = F/A, where F is the spring force and A is the face area.

Substituting the values,

[tex]P = 350 N / 3015.93 mm^2 = 0.116 N/mm^2[/tex].

c) External balance ratio can be calculated using the formula:

EBR = (D - B) / (D - d),

where D is the outer diameter, B is the effective balance diameter, and d is the inner diameter.

Substituting the values,

EBR = (80.0 - 65) / (80.0 - 60) = 0.625.

Internal balance ratio can be calculated using the formula:

IBR = (B - d) / (D - d),

where B is the effective balance diameter and d is the inner diameter.

Substituting the values, IBR = (65 - 60) / (80.0 - 60) = 0.25.

d) The seal is balanced if both the external and internal balance ratios are equal. In this case, the external balance ratio is 0.625 and the internal balance ratio is 0.25, which means the seal is unbalanced.

Learn more about spring force here:

https://brainly.com/question/14655680

#SPJ11

1. the value of T2 can be found as 40 N - (4 kg)(a) 2.  Tensile force in block B, TB can be calculated as 58.86 N - TB = (6 kg) 3.a = 1.961 m/s² 4. The acceleration of block B is 1.89 m/s²

Q1. Tensile force in block A
The equation of motion for block A is given as;
Tension in cable 1 (T1) - Tension in cable 2 (T2) = Tensile force in block AA 4 kg block means its mass is 4 kg.
Given that, T1 = 40 N and T2 = ?
For block A, the free body diagram can be shown as follows:
Therefore,40 N - T2 = (4 kg)(a)
Where 'a' is the acceleration of block A.
Using the above equation, the value of T2 can be found as:T2 = 40 N - (4 kg)(a)

Q2. Tensile force in block B
Given that the 6 kg mass is attached to cable 2;
Therefore, Tension in cable 2 (T2) = (6 kg)(g) = (6 kg)(9.81 m/s²) = 58.86 N
For block B, the free body diagram can be shown as follows:
The Tensile force in block B, TB can be calculated as;58.86 N - TB = (6 kg)(a)Where 'a' is the acceleration of block B.

Q3. Acceleration in block A
A free body diagram for block A is shown above, using this we can find the acceleration of block A.40 N - T2 = (4 kg)(a) T2 = 40 N - (4 kg)(a) Equation 1 ...1
The mass of block A is 4 kg and the force acting on block A is 40 N.
Therefore the acceleration of block A is given by Equation 2, F = ma40 N - T2 = (4 kg)(a)a = (40 N - T2)/4 kg
Substitute Equation 1 in 2, a = (40 N - (40 N - (4 kg)(a)))/4 kg
Therefore,a = 1.961 m/s²

Q4. Acceleration in block B The free body diagram for block B is shown above.
58.86 N - TB = (6 kg)(a)a = (58.86 N - TB)/6 kg Substitute TB from Q2, and calculate the acceleration of block B.
The acceleration of block B is;a = (58.86 N - 47.52 N)/6 kga = 1.89 m/s²

To learn more about Tensile force
https://brainly.com/question/13696855
#SPJ11

The correct answer is option (B) Scalar, vector, scalar.

Scalars are quantities that have a single value or magnitude, while vectors are quantities that have both magnitude and direction. Therefore, the correct answer is option (B) Scalar, vector, scalar. Let's explore the reasons why:

Scalar: The number of stars in the sky is a scalar quantity because it has a single value or magnitude without any direction associated with it.

Vector: Running 1 km east is a vector quantity because it has both magnitude and direction. The magnitude is the distance (1 km), and the direction is east.

Scalar: Temperature of 274 Kelvin is a scalar quantity because it has a single value or magnitude without any direction associated with it. Temperature is always considered a scalar quantity, regardless of whether it is measured in positive or negative numbers.

Hence, the correct answer is option (B), indicating a scalar quantity, vector quantity, and scalar quantity in that order.

Learn more about vector

https://brainly.com/question/24256726

#SPJ11

1) Inverse proportion is represented by the symbol c) A∝1/B

2) Acceleration is defined as b) The change in the velocity, direction, or both of a moving object.

1) Inverse proportion is a mathematical relationship between two variables, where an increase in one variable corresponds to a decrease in the other variable, and vice versa. In other words, as one variable increases, the other variable decreases in a predictable manner. Mathematically, inverse proportion is represented by the equation A ∝ 1/B, where A and B are the two variables involved.

2) Acceleration is a physical quantity that measures the rate of change of velocity of an object. It is a vector quantity, meaning it has both magnitude and direction. Acceleration can occur when an object speeds up, slows down, or changes direction.

To know more about Acceleration

brainly.com/question/28743430

#SPJ11

The coefficient of kinetic friction between the surface of the hill and the toboggan is 0.120.

Determine the coefficient of kinetic friction between the surface of the hill and the toboggan, we need to consider the forces acting on the toboggan.

the toboggan is sliding down the hill with a constant velocity, the net force acting on it must be zero. The forces acting on the toboggan are:

The gravitational force pulling it downward (mg), where m is the mass of the toboggan and g is the acceleration due to gravity.

The normal force exerted by the hill perpendicular to the surface.

The force of kinetic friction opposing the motion of the toboggan.

The gravitational force component parallel to the surface of the hill is given by

F_parallel = mg * sin(θ),

where θ is the angle of the hill with respect to the horizontal (6.90 degrees in this case).

The force of kinetic friction is given by:

F_friction = μ * N,

where μ is the coefficient of kinetic friction and N is the normal force.

Since the toboggan is moving with a constant velocity, the normal force is equal in magnitude and opposite in direction to the gravitational force component parallel to the surface:

N = mg * cos(θ).

Since the net force is zero, the force of kinetic friction must be equal in magnitude to the gravitational force component parallel to the surface:

F_friction = F_parallel.

Therefore, we have:

μ * N = mg * sin(θ).

Substituting the expressions for N and F_parallel:

μ * (mg * cos(θ)) = mg * sin(θ).

Simplifying and canceling out the mass (m) on both sides:

μ * cos(θ) = sin(θ).

Now we can solve for the coefficient of kinetic friction (μ):

μ = sin(θ) / cos(θ).

Substituting the given value for the angle θ:

μ = sin(6.90°) / cos(6.90°).

Calculating μ:

μ ≈ 0.120.

To know more about kinetic friction refer here

https://brainly.com/question/29086848#

#SPJ11

The initial velocity of the stone is 9.9 m/s directed downwards. Since the stone is thrown downward, the acceleration experienced by the stone will be equal to the acceleration due to gravity, which is denoted by 'g'.

Thus, the acceleration of the stone will be equal to 'g' = 9.8 m/s² directed downwards. The stone is moving in a direction opposite to the positive direction of the y-axis, so its velocity is negative. The magnitude of acceleration is 9.8 m/s² and the direction of acceleration is downward.

Since the acceleration is in the same direction as the velocity, the speed of the stone is increasing. (b) The distance covered by the stone in the given time can be calculated using the kinematic equation given below:

s = ut + (1/2)gt²where,s = distance covered by the stone u = initial

velocity of the stone, which is 9.9 m/st = time taken, which is 0.45 sg = acceleration due to gravity, which is 9.

8 m/s²Substituting the given values, we get:

s = (9.9 × 0.45) + (1/2 × 9.8 × 0.45²)s = 4.455 + 0.9915s = 5.4465 m

The stone falls 5.4465 m beneath the top of the cliff in 0.45 s.

To know more about velocity visit:

https://brainly.com/question/30559316

#SPJ11

The magnitude of the potential difference between the two conducting spheres connected by a conducting wire is 20.6 MV (million volts).

A test engineer attempts to model the process of an airplane allowing any charge build-up acquired in flight to leak off. Planes have needle-shaped metal extensions on their wings and tail, which create an electric field around the needle that is much larger than around the plane's body, resulting in dielectric breakdown of the air and discharging of the plane.The engineer models the situation with two conducting spheres connected by a conducting wire. The plane's sphere has a radius of 6.00 m, and the needle's sphere has a radius of 2.00 cm, with a total charge of 71.0 µC placed on the combination. The potential difference between the two conducting spheres connected by a conducting wire is calculated to be 20.6 MV (million volts).

The test engineer's modeling of the airplane's discharge process with two conducting spheres connected by a conducting wire yields a potential difference between the two spheres of 20.6 MV (million volts). This result demonstrates how the needle-shaped metal extensions on a plane's wings and tail function to allow charge build-up to leak off in flight, allowing the plane to discharge safely.

To know more about electric field, visit:

https://brainly.com/question/4440057

#SPJ11