[tex]\\ \sf\longmapsto 300-70.5=229.5kJ[/tex]
We know
[tex]\boxed{\sf Efficiency=\dfrac{Used\:Energy}{Supplied\:Energy}\times 100}[/tex]
[tex]\\ \sf\longmapsto Efficiency=\dfrac{229.5}{300}\times 100[/tex]
[tex]\\ \sf\longmapsto Efficiency=\dfrac{229.5}{3}[/tex]
[tex]\\ \sf\longmapsto Efficiency=76.5\%[/tex]
Mass stays the for an object even when or gravitational forces change the of the object.
Answer:
For some reason it doesn't let me type it in here so the answer is in the comment box!
I hope this will help you!:)
please help me guys never mind the calculations
The shape is connected in parallel so;
5.1) Ans;
[tex] \frac{1}{R} = \frac{1}{R1} + \frac{1}{R2} \\ \frac{1}{R} = \frac{1}{2} + \frac{1}{3} \\ \frac{1}{R} = \frac{3 + 2}{6} = \frac{5}{6} \\ R = \frac{6}{5} = 1.2 \: \: ohm[/tex]
5.2) Ans;
[tex] \frac{1}{R} = \frac{1}{R1} + \frac{1}{R2} \\ \frac{1}{R} = \frac{1}{8} + \frac{1}{10} \\ \frac{1}{R} = \frac{5 + 4}{40} = \frac{9}{40} \\ R = \frac{40}{9} = 4.4 \: \: ohm[/tex]
I hope I helped you^_^
3Three identical sheets of paper are taken, but arranged in different ways as shown. Which paper can support the most weight?
Answer:
The most thick paper can support maximum weight.
Explanation:
A paper is defined as a thin sheet of material that is prepared chemically or mechanically processing of the cellulose fibers which are derived from the grasses, wood, bamboos, trees or rags.
In the context, there are three different but identical sheets of paper that are arranged in different ways. Weights are placed over the papers. Now the most thick paper of the three provided will support most of the weight.
Paper thickness or paper weights are measured in GSM. GSM stands for grams per square meter. The thicker paper will have higher GSM.
Một vật không mang điện sẽ bị nhiễm điện dương khí
Answer:
không có điện
Explanation:
At the end of an investigation, you must__________ ____________. Your results may or may not support your hypothesis.
Answer:
could and largejsjisj and we look like they can get to
El salto con garrocha es practicado por:
A. Solo hombres
B. Solo mujeres
C. N.A
D. Solo a y b
is a corroding metal a physical or chemical change?
Answer:
Coording metal is a physical change.
An observer measures a 100 Hz Doppler shift as an ambulance goes by. At rest, the frequency of the ambulance's siren is 2,000 Hz. What is the speed of the ambulance?
The change in the frequency of the sound, due to the relative motion of the source of sound and the observer, is determined by the Doppler's Effect.
The speed of the ambulance (source) is "6517 m/s"
The equation of Doppler's Effect is given as follows:
[tex]f_o = \frac{v+v_o}{v+v_s}f_s[/tex]
where,
[tex]f_o\\[/tex] = frequency of sound measure by observer = 100 Hz
v = speed of sound = 343 m/s
[tex]v_o[/tex] = speed of observer = 0 m/s
[tex]v_s[/tex] = speed of ambulance (source) = ?
[tex]f_s[/tex] = actual frequency = 2000 Hz
Therefore, using the values, we get:
[tex]100\ Hz = \frac{343\ m/s + 0\ m/s}{343\ m/s + v_s}(2000\ Hz)\\\\(100\ Hz)(343\ m/s + v_s) = (343\ m/s)(2000\ Hz)\\\\v_s = \frac{686000\ Hz.m/s - 34300\ Hz.m/s}{100\ Hz}[/tex]
v_s = 6517 m/s
Learn more about Doppler's Effect here:
https://brainly.com/question/1330077?referrer=searchResults
Which scientist proposed the first atomic theory?
Answer:
The Greek philosophers leucippus and Democritus
Answer:
Democratus
Explanation:
I hope it help you
Please please help me out I’m lost
Answer:
Option B
The correct answer is 2
Answer:
helloooooo
look slope is
delta y / delta x
y2 - y1 / x2 - x1
look at the figure i attached i took any random 2 points and drew line till the x and y axes as it is straight line slope is constant we can take any 2 points
so as per points i took
( 8-4 ) / ( 2-4 )
4/-2 = -2
so slope is -2 which is constant throughout
brainliest pweaseeee
When 24.0 V is applied to a
capacitor, it stores 3.92 x 10-4 J of
energy. What is the capacitance?
[?] x 10!? E
[tex]\boxed{\sf E=QV^2}[/tex]
[tex]\\ \sf\longmapsto Q=\dfrac{E}{V^2}[/tex]
[tex]\\ \sf\longmapsto Q=\dfrac{3.92\times 10^{-4}}{24^2}[/tex]
[tex]\\ \sf\longmapsto Q=\dfrac{3.92\times 10^{-4}}{576}[/tex]
[tex]\\ \sf\longmapsto Q=0.006\times 10^{-4}C[/tex]
[tex]\\ \sf\longmapsto Q=6\times 10^{-1}C[/tex]
[tex]\\ \sf\longmapsto Q=0.6C[/tex]
Now
[tex]\boxed{\sf Q=CV}[/tex]
[tex]\\ \sf\longmapsto C=\dfrac{Q}{V}[/tex]
[tex]\\ \sf\longmapsto C=\dfrac{0.6}{24}[/tex]
[tex]\\ \sf\longmapsto C=0.025F[/tex]
Note:-
SI unit of charge is Coulomb(C)SI unitvof Capacitance is Farad(F)5. Which of the following is NOT correct walking technique?
O Looking at the ground
Standing tall
Pushing off your toes
Bending your arms
bending your arms
good luck bro
2.Cars were previously manufactured to be as sturdy as possible, whereas today's cars
are designed to crumple upon impact. Why?
Answer:
Crumple zones are designed to absorb and redistribute the force of a collision. ... Also known as a crush zone, crumple zones are areas of a vehicle that are designed to deform and crumple in a collision. This absorbs some of the energy of the impact, preventing it from being transmitted to the occupants.
Which one of the following explains how light energy helps us see all kinds of objects around us?
a flashlight shining light on a book
Light is absorbed by the objects and does not reach our eyes.
The objects emit light that enters our eyes.
Light reflects off the objects and enters our eyes.
Light travels in a straight line until it enters our eyes.
Answer:
light reflects off the objects and enter our eyes
What are the two groups of planets based on composition?
tam giác ABC vuông tại A được đặt trong điện trường đều E, α= ABC=60°.AB cùng hướng với E . Biết BC=6cm, hiệu điện thế giữa BC = 120V.
a) Tìm hiệu điện thế giữa AC và BA và cường độ điện trường E
Answer:
a, Vì E0// AC
⇒UBC=UBA=120V
⇒UAB=−120V
Hình chiếu của AC lên E0=0
nên AC=0
E0=UBABA=1200,06.cos60=4000V
/m
Explanation:
Not sure but hope it helps
How many valence electrons does each atom of arsenic (As) have? Arsenic is element 33. It is in period 4 and family 15 (5A or the Nitrogen family).
(1 point)
15
33
5
4
Answer:5
Explanation:
Which statement best describes the arrangement of electrons in an atom of fluorine (F)?
(1 point) giving brainliest for sure
There are two electrons in the first energy level and seven electrons in the second energy level.
There are two electrons in the first energy level and five electrons in the second energy level.
There are five electrons in the first energy level and two electrons in the second energy level.
There are seven electrons in the first energy level and two electrons in the second energy level.
Flourine is an element which has 9 electrons. The first energy level can only hold upto 2 electrons so therefore two electrons of the fluorine element will be in the first orbital.
In the second orbital there will be seven electrons. The configuration will be as 1s2, 2s2 , 2p5 .
The first orbital has capacity of two electrons and then the remaining two electrons will be in higher second energy level.
The further 5 electrons will be in lower second energy level which is denoted by p.
Learn more at https://brainly.com/question/24373325
Answer:
#1. 5
#2.They have valence electrons in the same energy level.
#3. Helium atoms have 2 valence electrons, while atoms of the other elements in the group all have 8 valence electrons.
#4. cesium (Cs)
#5. There are two electrons in the first energy level and seven electrons in the second energy level.
Explanation:
What could be used as another word for electrical potential
A.wattage
B.voltage
C.current
D.power
Answer:
hey mate
answer is probably voltage as per me
as
Explanation:
Voltage, electric potential difference, electric pressure or electric tension is the difference in electric potential between two points, which is defined as the work needed per unit of charge to move a test charge between the two points
A position of a particle moving on an x axis is given by x=7•4 + 9•2t - 2•1 t^3, with x in meters and t in seconds. what is its velocity at t=3•5s? is the velocity,or is it Continuously changing?
Answer:
The velocity at that time would be [tex](-67.975\; \rm s)[/tex]. The velocity of this particle is continuously changing.
Explanation:
Differentiate the expression for position [tex]x[/tex] with respect to time [tex]t[/tex] to find an expression for velocity.
[tex]\begin{aligned}v(t) &= \frac{d}{dt}[x(t)] \\ &= \frac{d}{dt} \left[ 7.4 + 9.2\, t - 2.1\, t^{3}\right]\\ &= 9.2 - 6.3\, t^{2}\end{aligned}[/tex].
Hence, at [tex]t = 3.5\; \rm s[/tex], velocity would be [tex]v(3.5) = 9.2 - 6.3 \times (3.5)^{2} = -67.975\; \rm m[/tex].
Since velocity [tex]v(t)[/tex] changes with time [tex]t[/tex], the velocity of this particle is continuously changing.
Starting from rest, two skaters push off against each other on smooth level ice, where friction is negligible. One is a woman and one is a man. The woman moves away with a velocity of 1.9 m/s relative to the ice. The mass of the woman is 46 kg, and the mass of the man is 88 kg. Assuming that the speed of light is 3.0 m/s, so that the relativistic momentum must be used, find the recoil velocity of the man relative to the ice.
why should we change worn out tyres. Topic》Frictional force
Explanation:
it loses air pressure...
and low pressure can result in tire blowouts which can cause lost of control of your vehicle
the speed of pendulum is slowest: a) at mountain b) at sea level
Answer:
At sea level
Explanation:
Because there is higher air pressure
The hydro power plant transforms one form of energy into another. However, the total amount
of energy of the water stays the same until it enters the turbine.
Explain how this statement is supported by the three column charts above.
*attached is the column charts
The hydro power plant consists of a (artificial) dam that builds gravitational potential energy, P.E. from natural flowing water sources, by locating the dam along the water path. The stored potential energy, P. is converted into kinetic energy, K.E. as the water falls from the dam, down to the turbines, located at a much lower level according to the following principle of conservation of energy equation;
Total Mechanical Energy, M.E. = The potential energy of the water, P.E. + The kinetic energy of the water, K.E. = Constant
M.E. = P.E. + K.E. = Constant
Where;
P.E. = m·g·h
K.E. = (1/2)·m·v²
m = Mass
g = The acceleration due to gravity
h = The height of the dam
v = The velocity
The charts can be explained as follows;
Given that the potential energy P.E. = m·g·h, we have that the potential energy is directly proportional to the height of the dam, and therefore, at mid height, the potential energy would be half the maximum value, and we have;
At mid height, P.E. = (1/2)·[tex]\mathbf{P.E._{max}}[/tex]
At the top of the dam, the (vertical) velocity of the water = 0, therefore, the kinetic energy = 0
Therefore, at the top of the dam, we get;
M.E. = [tex]P.E._{max}[/tex] + 0 =
M.E. = [tex]\mathbf{P.E._{max}}[/tex]
Similarly, at the bottom of the dam, the height, h = 0, therefore, being proportional to the height, P.E. = 0, and the velocity is maximum, and at the bottom, we have;
M.E. = 0 + [tex]K.E._{max}[/tex]
The first chart, water is halfway down the dam
At the halfway down therefore, we have;
P.E. = (1/2)·[tex]\mathbf{P.E._{max}}[/tex]
M.E. = [tex]P.E._{max}[/tex] = (1/2)·
∴ K.E. = [tex]P.E._{max}[/tex] - (1/2)·
Therefore the first chart, water is halfway down the dam;
Halfway, K.E. = (1/2)·[tex]\mathbf{P.E._{max}}[/tex] = P.E.
∴ K.E. = P.E. as shown on the chart
The second chart, water has reached the turbine
Water reaches the turbine at the bottom, and as explained above, we get;
M.E. = 0 + [tex]K.E._{max}[/tex]
∴ M.E.≈ [tex]K.E._{max}[/tex]
Therefore, when water has reached the turbine at the bottom of the dam, the kinetic energy is approximately proportional to the total mechanical energy as shown in the chart
The third chart, water is at the top of the dam
Here as shown above, we have;
The total mechanical energy, M.E. ≈ [tex]\mathbf{P.E._{max}}[/tex] as shown on the chart
Learn more about potential and kinetic energy here;
https://brainly.com/question/18683052
A scientist studies how air blowing on plants affects their growth. He uses fans to create different amounts of wind and measures the growth of the plants. What would make this experiment more repeatable?
Answer:D.Keeping track of the exact amount of wind on each plant
Why is it difficult to maintain constant speed of a vehicle?
Answer:
The road surface is always rough, so the frictional force between the tires and the road surface make it difficult to maintain constant speed because acceleration always changes.
A bus travelled 160 km in 4 hours, another bus travelled 175 km in 5 hours, which bus moved faster?
[tex]\boxed{\sf Speed=\dfrac{Distance}{Time}}[/tex]
For 1st bus:-Distance=160kmTime=4h[tex]\\ \sf\longmapsto Speed=\dfrac{160}{4}[/tex]
[tex]\\ \sf\longmapsto Speed=40km/h[/tex]
For 2nd busDistance=175kmTime=5h[tex]\\ \sf\longmapsto Speed=\dfrac{175}{5}[/tex]
[tex]\\ \sf\longmapsto Speed=35km/h[/tex]
Bus 1moved faster
which method is commonly used for improving cattle breeds and why?
Answer: Cross-breeding method is commonly used for improving cattle breeds. Cross-breeding between two good varieties of cattle will produce a new improved variety. Cross breeding is defined as the process or the act of producing offspring particularly through mating two pure bred individuals but come from different breeds, varieties, or even species. Crossbreeding is undertaken to: Utilise the desired attributes of two or more breeds. Produce progeny better suited to target markets while maintaining environmental adaption. Improve productivity quicker in traits which are slow to change within a breed i.e. environmental adaption, fertility and carcass traits.
Hope it helps :)
on which law is the given diagram based? state the law.
Answer:
Explanation:
law of flotation
or
pascal's law
A force of 20N is directed at an angle of 60° above the x-axis. A force of 20N is directed at an angle below the x-axis. What is the vector sum of the two forces?
NB:Use graph paper to find your answer.
check the pictures(2 pictures)check the pictures(2 pictures)check the pictures(2 pictures)
The vector sum of the two forces is 20 and the magnitude of the resultant is 20 towards positive x-axis.
What is a vector?A vector is a quantity or phenomena with magnitude and direction that are independent of one another. The phrase also refers to a quantity's mathematical or geometrical representation.
If no vector can be written as a linear combination of the others, a set of vectors is said to be linearly independent.
The vector representation for the forces F and F are:
[tex]\rm \vec F_1 = 20 COS 60^0 \vec i + 20 SIN 60^0 \vec j\\\\ F_1 =20 \times \frac{1}{2} \vec i+20 \times \frac{\sqrt{3} }{2} \vec j \\\\ \vec F_1 = 10 \vec i+ 10 \sqrt{3} \vec J[/tex]
[tex]\rm F_2 = 20 cos 60^0 \vec i+20 sin(-60) \vec j \\\\ F_2 = 20 \times \frac{1}{2} \times \vec i+20 \times \frac{\sqrt{3} }{2} \vec j \\\\ \vec F_2 = 10 \vec I -10\sqrt{3} \vec J[/tex]
The vector sum of the two forces are;
[tex]\rm \vec R = \vec F_1+\vec F_2\\\\ \vec R = 10 \vec i+ 10 \sqrt{3} \vec J+10 \vec i-10\sqrt{3} \vec J\\\\ \vec R =20 i[/tex]
To learn more about the vector refer to the link;
https://brainly.com/question/13322477
#SPJ2
