Answer:
M of HNO₃ is 0.119M
Explanation:
A basic concept of titration is that in equivalence point:
mmoles of acid = mmoles of base
We have data from base and we only have data from volume of acid.
In a case our titration is a strong acid against a strong base.
We apply formula:
M of acid . Vol of acid = M of base . Vol of base
M of acid . 21.8 mL = 0.137M . 19 mL
M of acid = (0.137M . 19 mL) / 21.8 mL
M of acid = 0.119 M
When we neutralize all the titrant we reach the equivalence point.
At this point, pH = 7
2HNO₃ + Ca(OH)₂ → Ca(NO₃)₂ + 2H₂O
A 25.0 mL sample of 0.150 M hypochlorous acid is titrated with a 0.150 M NaOH solution. What is the pH at the equivalence point? The Kaof hypochlorous acid is 3.0x10^-8.
a) 10.20
b) 7.00
c) 6.48
d) 7.52
e) 14.52
Answer:
pH = 10.20
Explanation:
The HClO reacts with NaOH as follows:
HClO + NaOH → H2O + NaClO
Where HClO and NaOH react in a 1:1 reaction.
As the concentration of both reactions is the same and the reaction is 1:1, to reach equivalence point are required the same 25.0mL.
And the NaClO produced decreases its concentration in 2 because the volume is doubled.
The concentration of NaClO is: 0.150M / 2 = 0.075M
The equilibrium of NaClO is:
NaClO(aq) + H2O(l) ⇄ HClO(aq) + OH-(aq)
Where Kb of reaction is 1.0x10⁻¹⁴ / Ka =
1.0x10⁻¹⁴ / 3.0x10⁻⁸ = 3.33x10⁻⁷ = [HClO] [OH-] / [NaClO]
[NaClO] = 0.075M
As both HClO and OH- comes from the same equilibrium,
[HClO] = [OH-] = X
Where X is the reactoin coordinate
Replacing:
3.33x10⁻⁷ = [X] [X] / [0.075M]
2.5x10⁻⁸ = X²
X = 1.58x10⁻⁴M = [OH-]
pOH = -log [OH-]
pOH = 3.80
pH = 14 - pOH
pH = 10.20A reaction vessel is charged with phosphorus pentachloride, which partially decomposes to phosphorus trichloride and molecular chlorine according to the following reaction:
PCl5(g)â PCl3(g)+Cl2(g)
When the system comes to equilibrium at 250.0°C, the equilibrium partial pressures are: PPCl5 = 0.688 atm and PPCl3 = PCl2 = 0.870 atm.
Required:
What is the value of Kp at this temperature?
Answer:
Kp = 1.10.
Explanation:
Hello there!
In this case, according to the given information about the chemical reaction at equilibrium, it turns out possible for us to find the partial pressures-based equilibrium expression for the decomposition of phosphorous pentachloride by applying the law of mass action whereas the pressure of products is divided by that of the reactants as shown below:
[tex]Kp=\frac{p_{PCl_3}p_{Cl_2}}{p_{PCl_5}}[/tex]
Now, we plug in the given pressures to obtain:
[tex]Kp=\frac{0.870}{0.688} \\\\Kp=1.10[/tex]
Regards!
Carboxylic acid derivatives undergo hydrolysis to make carboxylic acids.
a. True
b. False
Answer:
TRUE
Explanation:
All carboxylic acid derivatives have in common the fact that they undergo hydrolysis (a cleav- age reaction with water) to yield carboxylic acids. with hydroxide ion to yield a carboxylate salt and an alcohol. The carboxylic acid itself is formed when a strong acid is subsequently added to the reaction mixture.
PLS MARK BRAINLIEST
The shape of a molecule is determined by:
A. All of these
B. The number of electron clouds around the atom.
C. The number of bonds.
D. Mutual repulsion between electrons.
A strawberry nutritional drink used for a liquid diet is flavored with methyl butanoate. Draw the structure of methyl butanoate.
Answer:
See explanation and image attached
Explanation:
Methyl butanoate is an ester. Esters have the general molecular formula, RCOOR where the two Rs may represent the same or different alkyl groups.
Methyl butanoate is has a fruity odor, smelling like apples or pineapples fragrance. It is also called methyl butyrate.
The structure of the compound is shown in the image attached to this answer.
A student has accidentally spilled 100.0 mL of 3.0 mol/L nitric acid onto the lab bench. What mass of sodium bicarbonate would the teacher need to sprinkle on this spill to neutralize and clean it up?
Answer:
25 g
Explanation:
Step 1: Write the balanced equation
HNO₃ + NaHCO₃ ⇒ NaNO₃ + H₂O + CO₂
Step 2: Calculate the reacting moles of HNO₃
100.0 mL of 3.0 mol/L HNO₃ reacted.
0.1000 L × 3.0 mol/L = 0.30 mol
Step 3: Calculate the reacting moles of NaHCO₃
The molar ratio of HNO₃ to NaHCO₃ is 1:1. The reacting moles of NaHCO₃ are 1/1 × 0.30 mol = 0.30 mol.
Step 4: Calculate the mass corresponding to 0.30 moles of NaHCO₃
The molar mass of NaHCO₃ is 84.01 g/mol.
0.30 mol × 84.01 g/mol = 25 g
The reaction for photosynthesis producing glucose sugar and oxygen gas is:
__CO2(g) + __H2O(l) UV/chlorophyl−→−−−−−−−−−−−−−− __C6H12O6(s) + __O2(g)
What is the mass of glucose (180.18 g/mol) produced from 2.20 g of CO2 (44.01 g/mol)?
a. 66.1 g C6H12O6
b. 396 g C6H12O6
c. 54.0 g C6H12O6
d. 1.50 g C6H12O6
e. 9.01 g C6H12O6
The correct option is d.: 1.5 grams of glucose is produced from 2.20 g of CO₂.
To find the mass of glucose produced, first you must know the balanced reaction. For this, the Law of Conservation of Matter is followed.
The law of conservation of matter states that since no atom can be created or destroyed in a chemical reaction, the number of atoms that are present in the reagents has to be equal to the number of atoms present in the products.
So, in this case, the balanced reaction is:
6 CO₂ + 6 H₂O → C₆H₁₂O₆ + 6 O₂
By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the amounts of moles of each reactant and product participate in the reaction:
CO₂: 6 moles H₂O: 6 moles C₆H₁₂O₆: 1 mole O₂: 6 molesSo, you know that 2.20 g of CO₂ react, whose molar weight is 44.01 g/mole. By definition of molar mass, 1 mole of CO₂ has 44.01 g. So, the number of moles that 2.20 grams of the compound represent is calculated as:
[tex]moles of CO_{2} =2.20 grams*\frac{1 mole}{44.01 grams}[/tex]
moles of CO₂= 0.05 moles
Now you must follow the following rule of three: if by stoichiometry of the reaction 6 moles of CO₂ produce 1 mole of C₆H₁₂O₆, 0.05 moles of CO₂ produce how many moles of C₆H₁₂O₆?
[tex]moles of C_{6} H_{12} O_{6} =\frac{0.05moles of CO_{2} *1 mole of C_{6} H_{12} O_{6}}{6moles of CO_{2}}[/tex]
moles of C₆H₁₂O₆= 8.33*10⁻³
Being the molar mass of glucose 180.18 g/mole, the mass that 8.33*10⁻³ moles of the compound represent is calculated as:
[tex]mass of glucose =8.33*10^{-3} moles*\frac{180.18 grams}{1 mole}[/tex]
mass of glucose= 1.5 grams
In summary, the correct option is d.: 1.5 grams of glucose is produced from 2.20 g of CO₂.
Learn more about a similar problem: https://brainly.com/question/24299106
Balance the following reaction:
_______ CO₂ + _______ H₂O + heat ↔ _______ C₆H₁₂O₆ + _______ O₂
Please explain!
*Note: If any of the coefficients are the number one. Please, write "1" in the space. Thanks!
Answer:
6CO2+6H2O+heat" C6H12O6+6O2
the best way to balance a chemical reaction is to start with balancing the hydrogen followed by the other elements then lastly oxygen.so in this case if you put a 6 in front of carbon dioxide,water and oxygen you will definitely balance it.cause at the first side you have 6 carbons similar to the product,12 oxygen similar to the product and 18 oxygen similar to the products.
I hope this helps
Answer:
Explanation:
I saw this after answering your other question on the same reaction.
To balance the chemical reaction, look at the reactants and products. As O is part of both products, focus on C and H instead.
On the products side, 1 C6H12O6 has 6 C and 12 H. So that requires the same numbers of C and H on the reactant side because of mass conservation.
That gives 6 CO2 and 6 H2O as the reactants. Counting the number of O in the reactants, there are 6*2 + 6 = 18 O. Subtracting the 6 O in C6H12O6, that leaves 12 O so there are 12/2 = 6 O2 in the products.
Combining the numbers above, the balanced equation is:
___6___ CO₂ + ___6___ H₂O + heat ↔ ___1___ C₆H₁₂O₆ + ___6___ O₂
385 x 42.13 x 0.079 is (consider significant figures):
385 x 42.13 x 0.079 = 1281.38395
A Grignard reagent is prepared by reacting trans-1-bromo-1-butene with magnesium. What are the products of the reaction when this reagent is reacted with: a. Ethanol
Solution :
A Grignard compound or a Grignard reagent is defined as a chemical compound having a generic formula of R−Mg−X.
Here, X = halogen
R = organic group
The Grignard reagents are obtained by treating the organic halide with a magnesium metal.
In the context, when trans-1-bromo-1-butene is reacted with magnesium, a Grignard reagent is produced.
When this Grignard reagent is reacted with an ethanol, the following product is obtained in the attachment :
When comparing Be2 and H2:
I. Be2 is more stable because it contains both bonding and antibonding valence electrons.
II. H2 has a higher bond order than Be2.
III. H2 is more stable because it only contains 1s electrons.
IV. H2 is more stable because it is diamagnetic, whereas Be2 is paramagnetic
a. II,III,IV
b.II,III
c.III only
d.I,II
e.III,IV.
Answer:
The answer is "Option b".
Explanation:
H2 does have bond energy of 1, while Be2 has a covalent bond of zero. Be2 has eight electrons, each of which dwells in a distinct orbital. As just a result, four of them are linked molecular orbitals and two are antibonding molecular orbitals, respectively. As just a result, this molecule is unstable. This chemical orbital, with a bond order of 1, has just two electrons. As a result, it is a very solid substance. H2's bond length is higher than Be2's. Since it only has one electron, H2 is more stable than that of other compounds.
The molecular ion is not visible in the mass spectrum of 2-chloro-2- methylpropane. At what m/z value would the molecular ion be if it were visible? What evidence is there in the mass spectrum that suggests that the peak at m/z= 77 contains a chlorine atom?
Answer: hello the complete question is attached below
Visibility of molecular ion = m/z value of 77
Explanation:
For The molecular ion to be visible, it has to be at an m/z value of 77 and this is because molecular ions will have an m/z ratio = molecular mass of given molecule in most cases but not always in all cases.
And the visibility is possible after the removal of CH₃ ion.
ii) Evidence in the mass spectrum that suggests peak at m/z = 77
attached below
2- . the number of waves in n *10 bohr's orbit are
convert 14.72 kg to ____ mg
Answer:
14720000
Explanation:
1 kg = 1000000 mg
14.72 kg = 14.72 x 1000000
=14720000
Please Mark me brainliest
Describe a NAMED example of a non-equilibrium system with respect to it’s energetic nature and equilibrium status.
Answer:
Non-equilibrium thermodynamics is a branch of thermodynamics that deals with physical systems that are not in thermodynamic equilibrium but can be described in terms of variables (non-equilibrium state variables) that represent an extrapolation of the variables used to specify the system in thermodynamic equilibrium.
Explanation:
Determine whether the statement about identifying a halide is true: Regardless of any concentration of ammonium solution, the precipitates in the reaction solution of my unknown halide after 0.1M AgNO3 remain because my unknown halide solution contains Br. Select one: True False
Answer:
False
Explanation:
The statement ; Regardless of any concentration of ammonium solution the precipitate of unknown halide after 0.1M AgNO3 will remain is FALSE
This is Because the remaining concentration of AgNO3 is dependent on the solubility of Ag⁺
explain hydrogen dioxide
Answer:
Two molecules of hydrogen combine with two molecules of oxygen to form hydrogen peroxide. Hence, its chemical formula is H2O2. It is the simplest peroxide (since it is a compound with an oxygen-oxygen single bond). Hydrogen peroxide has basic uses as an oxidizer, bleaching agent and antiseptic
QUESTION 11
Identify the reaction type.
KOH + HNO3 -> H2O + KNO3
O combustion
O decomposition
O combination
O single displacement
O double displacement
Four atoms and/or ions are sketched below in accordance with their relative atomic and/or ionic radii. Which of the following sets of species are compatible with the sketch?
Explain. (a) C,Ca2+,Cl−,Br−;
(b) Sr4, Cl,Br−,Na+
(d) Al,Ra2+,Zr2+
(c) Y,K,Ca,Na+, Mg2+;
e) Fe,Rb,Co,Cs
Answer:
Hence the correct option is an option (b) Sr4, Cl,Br−,Na+.
Explanation:
Bromine and chlorine belong to an equivalent group. As we go down the group the dimensions increases which too there's a charge on the bromine atom. therefore the size of the Br- is going to be larger in comparison to the chlorine atom.
Sr atom is within the second group, and also it's below the above-mentioned atoms.so Sr is going to be the larger one among all the atoms.
Sodium and chlorine belong to an equivalent period .size decrease from left to right. but due to the charge on sodium its size decreases and there's an opportunity that Na+ size could be adequate for Cl.
Here we finally assume that two atoms are of an equivalent size (Na+ and Cl) which are less in size compared to the opposite two(Sr and Br-) during which one is greater (Sr)and the opposite is smaller(Br-).
Part A
3.75 mol of LiCl in 3.36 L of solution
Express the molarity in moles per liter to three significant figures
Answer:
1.12 mol/L.
Explanation:
From the question given above, the following data were obtained:
Mole of LiCl = 3.75 moles
Volume = 3.36 L
Molarity =?
Molarity is simply defined as the mole of solute per unit litre of the solution. Mathematically, it is expressed as:
Molarity = mole / Volume
With the above formula, we can obtain the molarity of the solution as follow:
Mole of LiCl = 3.75 moles
Volume = 3.36 L
Molarity =?
Molarity = mole /Volume
Molarity = 3.75 / 3.36
Molarity = 1.12 mol/L
Thus, the molarity of the solution is 1.12 mol/L
5. For Sodium, the Work Function is listed as 2.75 eV but the Ionization Energy is listed as 5.14 eV. Is one of the experiments wrong? Give a possible explanation as to this difference in the minimum energy needed to eject or free an electron from Sodium.
Answer:
See explanation
Explanation:
The work function of a metal is defined as that minimum energy which is required to remove one electron from the surface of a metal when it is irradiated with a photon of light. The work function is different for different metals.
The ionization energy of a metal is the energy required to remove an electron from an atom. It depends on the position of the electron within the atom.
The work function specifically refers to the energy required to remove an electron from the conduction band of a metal. Hence, the work function is always lower than the ionization energy.
Write the chemical formula for the following:
a. The conjugate acid of amide ion, NH₂-
b. The conjugate base of nitric acid, HNO₃
Follow the rules of Bronsted Lowry theory
Acids take a HBases donate a HSo
#a
NH_2-
Add a H
Conjugate acid is NH_3#b
HnO_3
Take a H
Conjugate base is NO_3-#1
Conjugate acid means one H+ is added
NH_2+H+=NH_3sw
#2
Conjugate base means donate a H+
HNO_3-H=NO_3-Which of the following chemical equations depicts a balanced ionic equation?
A. 2OH−+Ca2+−>Ca(OH)2
B. OH−+Ca2+−>Ca(OH)2
C. 2OH−+Ca2+−>2Ca(OH)2
D. OH−+2Ca2+−>Ca(OH)2
Answer:
[tex]{ \sf{A. \: 2OH {}^{ - } _{(aq)} +Ca {}^{2 + } _{(aq)} −>Ca(OH) _{2(s)} }}[/tex]
The chemical equations depict a balanced ionic equation is 2OH−+Ca2+−>Ca(OH)2. option A is correct.
What is the ionic equation?
An ionic equation is a chemical equation in which the electrolytes in an aqueous solution are expressed as dissociated ions. The ions in aqueous solutions are stabilized by ion-dipole interactions with water molecules
Strong acids, strong bases, and soluble ionic compounds (usual salts) exist as dissociated ions in an aqueous solution, and Weak acids and bases and insoluble salts are usually written using their molecular formulas because only a small amount of them dissociates into ions.
Ag+(aq) + NO3-(aq) + Na+(aq) + Cl-(aq) → AgCl(s) + Na+(aq) + NO3-(aq) is an ionic equation example.
Therefore, the balanced ionic reaction will be 2OH−+Ca2+−>Ca(OH)2. option A is correct.
Learn more about ionic reactions, here:
https://brainly.com/question/13887096
#SPJ5
How many grams of glucose are needed to prepare 144.3 mL of a 1.4%(m/v) glucose solution?
Answer:
2.0202 grams
Explanation:
1.4% (m/v) glucose solution means: 1.4g glucose/100mL solution.
so ?g glucose = 144.3 mL soln
Now apply the conversion factor, and you have:
?g glucose = 144.3mL soln x (1.4g glucose/100mL soln).
so you have (144.3x1.4/100) g glucose= 2.0202 grams
Phosphorylation of enzymes:_______.
a. always increases their activity.
b. generally occurs on Ser, Thr, and/or Tyr side chains and to a lesser extent on the His side chain.
c. is irreversible.
d. is one of only five known covalent forms of regulation.
Answer:
generally occurs on Ser, Thr, and/or Tyr side chains and to a lesser extent on the His side chain
what characterizes a homogeneous mixture?
Answer:
a mixture that doesn't really show the ingredients or things put into the material or food.
5. How many moles are present in 4.20x10^24 atoms of Pb
Explanation:
[tex]57816 \: moles[/tex]
are present in 4.20x10^24 atoms of Pb
Answer:
7 moles
Explanation:
(4.2*10^24)/(6*10^23)=7
What mass of precipitate (in g) is formed when 250.0 mL of 0.150 M CuCl₂ is mixed with excess KOH in the following chemical reaction?
CuCl₂(aq) + 2 KOH(aq) → Cu(OH)₂(s) + 2 KCl(aq)
Answer:
3.6487g
CuCl2 moles reacted = (0.15×250)/1000
according to balanced chemical equation
precipitated Cu(OH)2 moles = Reacted CuCl2 moles
molar mass of Cu(OH)2 = 63.5+ (17+1)×2 = 97.5
mass of precipitate = (97.5 × 0.15×250)/1000
= 3.648g
Predict the missing component in the nuclear equation.
238 92U → 234 90Th + X
A. 4 2He
B. 0 -1e
C. 0 0v
Answer:
A
Explanation:
helium (alpha particle)
Karl-Anthony is trying to plate gold onto his silver ring. He constructs an electrolytic cell using his ring as one of the electrodes. He runs this cell for 94.3 minutes at 205.3 mA. How many moles of electrons were transferred in this process
Answer:
0.012 moles of electrons were transferred
Explanation:
We can find the number of electrons transferred from the time in seconds and the current in Amperes using the equation:
n = I*t / F
Where n are moles of electrons transferred
I is current in Amperes = 0.2053A
t is time in seconds:
94.3min*(60s/1min) = 5658s
F is faraday constant 96485A*s/mol
Replacing:
n = 0.2053A*5658s / 96485A*s/mol
n = 0.012 moles of electrons were transferred
Moles are the mass per unit molar mass of compound. The number of moles of electrons that are transferred is 0.012 moles.
What is an electrolytic cell?An electrolytic cell is a type of electrochemical cell that uses electrical energy from external sources to conduct the chemical energy in a cell.
The moles transferred in electrolytic cells are measured as:
[tex]\rm n = \rm \dfrac{I\times t}{F}[/tex]
Given,
Current (I) in amperes = 0.2053 A
Time (t) in seconds = 5658 sec
Faraday constant (F) = 96485 A -s/mol
Substituting values in the equation above moles (n) can be calculated as:
[tex]\begin{aligned} \rm n &= \dfrac{ 0.2053 \times 5658 }{96485}\\\\&= 0.012 \;\rm mol\end{aligned}[/tex]
Therefore, 0.012 moles are transferred in this process.
Learn more about electrolytic cells here:
https://brainly.com/question/22514717
