To prove the statement using the given hint, we'll use the conditional probability formula and the properties of probability axioms. Let's proceed with the proof:
1. Conditional Probability Formula:
The conditional probability of event A given event B is defined as:
P(A|B) = P(A ∩ B) / P(B)
2. Law of Total Probability:
According to the Law of Total Probability, for any two events A and B:
P(A) = P(A ∩ B) + P(A ∩ B')
3. Axiom 3 of Probability:
The probability of the sample space Ω is 1, i.e., P(Ω) = 1.
Now, let's proceed with the proof:
We need to show that P(A|B) + P(A'|B) = 1.
Using the conditional probability formula:
P(A|B) = P(A ∩ B) / P(B) ---(1)
P(A'|B) = P(A' ∩ B) / P(B) ---(2)
Using the Law of Total Probability:
P(A) = P(A ∩ B) + P(A ∩ B') ---(3)
From equation (3), we can rewrite P(A ∩ B') as:
P(A ∩ B') = P(A) - P(A ∩ B)
Now, substituting this value in equation (2):
P(A'|B) = (P(A' ∩ B)) / P(B)
= (P(A) - P(A ∩ B)) / P(B) ---(4)
Adding equations (1) and (4), we have:
P(A|B) + P(A'|B) = (P(A ∩ B) / P(B)) + ((P(A) - P(A ∩ B)) / P(B))
= (P(A ∩ B) + P(A) - P(A ∩ B)) / P(B)
= P(A) / P(B)
Now, using the Axiom 3 of Probability:
P(A) / P(B) = P(A) / (P(B) + P(B')) ---(5)
Using the Law of Total Probability:
P(B) + P(B') = P(Ω) = 1
Substituting this value in equation (5):
P(A) / (P(B) + P(B')) = P(A) / 1 = P(A)
Therefore, we have:
P(A|B) + P(A'|B) = P(A)
Since the sum of the probabilities of mutually exclusive events is 1, we can conclude that:
P(A|B) + P(A'|B) = 1
Hence, the statement is proven.
Learn more about conditional probability here:brainly.com/question/10739997
#SPJ11
Which lines, if any, are parallel in the diagram below?
Answer:
I and M are parallel to each other as well as N and P are parallel.
Step-by-step explanation:
Derive the three-point central formula that approximate the derivative of a function f(x) is a point x 0
. What is the error made using this approximation? QUESTION 3 [3 marks] Determine the derivative of the function f(x)=ln(1−x 2
) in the point x 0
=−0.5 using three-point central formula with h=0.1
The three-point central difference formula for approximating the derivative of a function f(x) at a point x₀ is given by:
f'(x₀) ≈ (f(x₀ + h) - f(x₀ - h)) / (2h)
where h is the step size or interval between neighboring points.
The error made using this approximation is on the order of O(h²), which means it is proportional to the square of the step size. In other words, as h becomes smaller, the error decreases quadratically. This makes the three-point central difference formula a second-order accurate approximation for the derivative.
To determine the derivative of the function f(x) = ln(1 - x²) at x₀ = -0.5 using the three-point central formula with h = 0.1, we can apply the formula as follows:
f'(-0.5) ≈ (f(-0.5 + 0.1) - f(-0.5 - 0.1)) / (2 * 0.1)
Simplifying the expression:
f'(-0.5) ≈ (f(-0.4) - f(-0.6)) / 0.2
Substituting the function f(x) = ln(1 - x²):
f'(-0.5) ≈ (ln(1 - (-0.4)²) - ln(1 - (-0.6)²)) / 0.2
f'(-0.5) ≈ (ln(1 - 0.16) - ln(1 - 0.36)) / 0.2
Evaluating the logarithmic terms:
f'(-0.5) ≈ (ln(0.84) - ln(0.64)) / 0.2
Calculating the difference of logarithms and dividing by 0.2 will give the approximate value of the derivative at x₀ = -0.5.
Learn more about derivative here:
brainly.com/question/29144258
#SPJ11
Let X∼N(0,2
2
), what is P(X<3) ?
There is approximately a 93.32% probability that X is less than 3 in this standard normal distribution.
To find P(X < 3) for a standard normal distribution X ~ N(0, 2^2), we can use the cumulative distribution function (CDF) of the standard normal distribution.
The CDF gives the probability that a random variable is less than or equal to a specific value. In this case, we want to find the probability that X is less than 3.
Using the standard normal distribution table or a calculator, we can find that the cumulative probability for Z = 3 is approximately 0.9987.
Since X follows a standard normal distribution with a mean of 0 and a standard deviation of 2, we can convert the value 3 to a z-score using the formula:
z = (X - μ) / σ
Substituting the given values:
z = (3 - 0) / 2 = 1.5
The z-score of 1.5 corresponds to a cumulative probability of approximately 0.9332.
Therefore, P(X < 3) ≈ 0.9332.
In other words, there is approximately a 93.32% probability that X is less than 3 in this standard normal distribution.
for such more question on probability
https://brainly.com/question/13604758
#SPJ8
21. In a between-subjects, two-way ANOVA, MSinteraction \( =842.33 \) and MSwithin \( =3,578.99 \). What is Finteraction? \( 3.25 \) \( 0.24 \) \( 1.24 \) \( 4.25 \)
The correct option is `0.24.`
In a between-subjects, two-way ANOVA, MSinteraction = 842.33 and MSwithin = 3,578.99. We need to determine Finteraction.
Formula for Finteraction is: `Finteraction = MSinteraction/MSwithin` ...[1]Putting values in Equation [1], we get: `Finteraction = 842.33/3,578.99`Simplifying the above expression, we get: `Finteraction = 0.23527`Approximating to two decimal places, we get: `Finteraction = 0.24` Hence, the Finteraction is 0.24.
Learn more about ANOVA
https://brainly.com/question/30763604
#SPJ11
Given μ=50 and σ=6.25 : (a) Find the bounds which represent a lower bound of 93.75% of information. (b) Find the bounds which represent a lower bound of 89% of information.
(a) The lower bound that represents 93.75% of the information is
approximately 42.8125.
(b) The lower bound that represents 89% of the information is approximately 42.3125.
To find the bounds that represent a lower percentage of information, we need to calculate the corresponding z-scores and then use them to find the values that fall within those bounds.
(a) Finding the bounds for 93.75% of information:
Step 1: Find the z-score corresponding to the desired percentage. Since we want to find the lower bound, we need to find the z-score that leaves 6.25% of the data in the tail.
Using a standard normal distribution table or a calculator, we find that the z-score corresponding to the lower tail of 6.25% is approximately -1.15.
Step 2: Calculate the lower bound using the z-score formula:
Lower Bound = μ + (z-score * σ)
Lower Bound = 50 + (-1.15 * 6.25)
Lower Bound ≈ 50 - 7.1875
Lower Bound ≈ 42.8125
So, the lower bound that represents 93.75% of the information is approximately 42.8125.
(b) Finding the bounds for 89% of information:
Step 1: Find the z-score corresponding to the desired percentage. Since we want to find the lower bound, we need to find the z-score that leaves 11% of the data in the tail (100% - 89%).
Using a standard normal distribution table or a calculator, we find that the z-score corresponding to the lower tail of 11% is approximately -1.23.
Step 2: Calculate the lower bound using the z-score formula:
Lower Bound = μ + (z-score * σ)
Lower Bound = 50 + (-1.23 * 6.25)
Lower Bound ≈ 50 - 7.6875
Lower Bound ≈ 42.3125
So, the lower bound that represents 89% of the information is approximately 42.3125.
Learn more about lower bound here:
https://brainly.com/question/32676654
#SPJ11
Let X and Y have joint density f(x,y)={
cx,
0,
when 0
2
x
<1
otherwise.
Determine the distribution of XY. 26. Suppose that X and Y are random variables with a joint density f(x,y)={
y
1
e
−x/y
e
−y
,
0,
when 0
otherwise.
Show that X/Y and Y are independent standard exponential random variables and exploit this fact in order to compute EX and VarX. 27. Let X and Y have joint density f(x,y)={
cx,
0,
when 0
3
x
<1
otherwise.
Determine the distribution of XY.
In the first part, we determine the distribution of XY by integrating the joint density function. In the second part, we verify the independence and exponential distribution to compute EX and VarX.
The joint density function \(f(x, y)\) describes the distribution of two random variables, X and Y. To determine the distribution of XY, we need to find the cumulative distribution function (CDF) of XY.
To do this, we integrate the joint density function over the appropriate region. In this case, we integrate \(f(x, y)\) over the region where \(XY\) takes on a specific value.
Once we have the CDF of XY, we can differentiate it to obtain the probability density function (PDF) of XY. This will give us the distribution of XY.
Regarding the second part of the question, we are given the joint density function of X and Y. To show that X/Y and Y are independent standard exponential random variables, we need to verify two conditions:
1. Independence: We need to show that the joint density function of X/Y and Y can be expressed as the product of their individual density functions.
2. Exponential distribution: We need to show that the individual density functions of X/Y and Y follow the standard exponential distribution.
Once we establish the independence and exponential distribution, we can use these properties to compute the expected value (EX) and variance (VarX) of X.
In summary, the first part involves finding the distribution of XY by integrating the joint density function, while the second part involves verifying the independence and exponential distribution to compute EX and VarX.
To learn more about PDF, click here: brainly.com/question/31748399
#SPJ11
calculator display shows results from a test of the claim that less than 8% of treated subjects experienced headaches. Use the normal distribution as an approximation to the 1-PxopzTest prop <0.08 z=1.949033055 p=0.9743542623
p^=0.1123595506 π=267 a. Is the test two-tailed, left-tailed, or right-tailed? Right tailed test Left-tailed test Two-tailed test b. What is the test statistic? z= c. What is the P-value? P-value =
a. The test is a right-tailed test.
b. The test statistic is z = 1.949033055.
c. The P-value is 0.0256457377 (or approximately 0.0256).
a. The test is a right-tailed test because the claim is that less than 8% of treated subjects experienced headaches, indicating a specific direction.
b. The test statistic is given as z = 1.949033055.
c. The P-value is 0.0256457377 (or approximately 0.0256). The P-value represents the probability of obtaining a test statistic as extreme as the observed value (or even more extreme) under the null hypothesis.
In this case, the null hypothesis states that the proportion of treated subjects experiencing headaches is equal to or greater than 8%. The alternative hypothesis, which is the claim being tested, is that the proportion is less than 8%.
To calculate the P-value, we compare the test statistic (z = 1.949033055) to the standard normal distribution. Since this is a right-tailed test, we calculate the area under the curve to the right of the test statistic.
The P-value of 0.0256457377 indicates that the probability of obtaining a test statistic as extreme as 1.949033055 (or even more extreme) under the null hypothesis is approximately 0.0256. This value is smaller than the significance level (usually denoted as α), which is commonly set at 0.05.
Therefore, if we use a significance level of 0.05, we would reject the null hypothesis and conclude that there is evidence to support the claim that less than 8% of treated subjects experienced headaches.
Learn more about right-tailed test here:
https://brainly.com/question/33173756
#SPJ11
Let Y be a uniform random variable in the interval [−1,1], and X be a random variable, where X=Y
n
, where n is a positive integer. Find the CDF and pdf of X, specifying the range of values for which each function is true. HINT: You may want to break down the problem into two parts: one for odd values of n and another part for even values of n.
The PDF of X for both odd and even values of n follows the same expression, except for the range of valid values. For odd values of n, the PDF is valid for 0 ≤ x ≤ 1, while for even values of n, the PDF is valid for 0 ≤ x ≤ 1.
To find the Cumulative Distribution Function (CDF) and Probability Density Function (PDF) of the random variable X, where X = [tex]Y^n[/tex] and Y is a uniform random variable in the interval [-1, 1], we need to consider two cases: one for odd values of n and another for even values of n.
Case 1: Odd values of n
For odd values of n, the relationship X = [tex]Y^n[/tex] remains valid. The CDF of X can be expressed as:
F(x) = P(X ≤ x) = P([tex]Y^n[/tex] ≤ x)
Since Y is uniformly distributed between -1 and 1, we can rewrite the CDF as:
F(x) = P(-1 ≤ Y ≤ [tex]x^(1[/tex]/n))
For x < -1, the probability is 0 since Y cannot take values below -1. For x > 1, the probability is 1 as Y cannot take values above 1. Therefore, the valid range for the CDF is -1 ≤ x ≤ 1. The PDF can be obtained by differentiating the CDF:
f(x) = d/dx [F(x)] = d/dx [P([tex]Y^n[/tex] ≤ x)]
To find the PDF, we consider the cases when x is within the range [-1, 1]:
For -1 ≤ x < 0, the PDF is 0 since [tex]Y^n[/tex] will always be positive in this range.
For 0 ≤ x ≤ 1, the PDF is the derivative of the CDF, which can be computed using the chain rule:
f(x) = (d/dx) [F(x)] = (1/n) * [tex]Y^(1[/tex]/n - 1) * f_Y(Y)
where f_Y(Y) is the PDF of Y, which is constant and equal to 1/2 for -1 ≤ Y ≤ 1.
Therefore, for odd values of n, the PDF of X is given by:
f(x) = (1/n) * [tex]x^(1[/tex]/n - 1) * (1/2) for 0 ≤ x ≤ 1
f(x) = 0 otherwise
Case 2: Even values of n
For even values of n, the relationship X = [tex]Y^n[/tex] needs to be modified since taking an even power will result in positive values only. In this case, we have:
X = [tex]|Y|^n[/tex]
The CDF of X can be expressed as:
F(x) = P(X ≤ x) = P(|Y[tex]|^n[/tex] ≤ x)
Similar to the previous case, we can rewrite the CDF as:
F(x) = P[tex](-x^(1/n) ≤ Y ≤ x^(1/n)[/tex])
For x < 0, the probability is 0 since Y cannot take negative values. For x > 1, the probability is 1 as Y cannot take values above 1. Therefore, the valid range for the CDF is 0 ≤ x ≤ 1. The PDF can be obtained by differentiating the CDF:
f(x) = d/dx [F(x)] = d/dx [P(|Y[tex]|^n[/tex] ≤ x)]
To find the PDF, we consider the cases when x is within the range [0, 1]:
For 0 ≤ x ≤ 1, the PDF is the derivative of the CDF, which can be computed using the chain rule:
f(x) = (d/dx) [F(x)] = (1/n) * [tex]Y^(1[/tex]/n - 1) * f_Y(Y)
where f_Y(Y) is the PDF of Y, which is constant and equal to 1/2 for -1 ≤ Y ≤ 1.
Therefore, for even values of n, the PDF of X is given by:
f(x) = (1/n) * [tex]x^(1[/tex]/n - 1) * (1/2) for 0 ≤ x ≤ 1
f(x) = 0 otherwise
To know more about Cumulative Distribution refer to-
https://brainly.com/question/30402457
#SPJ11
By what number should-8/25 be divided to get -5/2
Answer:
16/125
Step-by-step explanation:
Answer:
16/125
Step-by-step explanation:
-8/25 * 125/16= -5/2
Let f(x,y) = 3+xy-2y and let D be the closed triangular region with vertices (1,0), (5,0), (1,4). Note: be careful as you plot these points, it is common to get the x and y coordinates backwards by accident. Find the boundary critical point along the boundary between points (5,0) and (1,4).
( ________, _________ )
Let's find the boundary critical point along the boundary between points (5,0) and (1,4) of the closed triangular region defined by the vertices (1,0), (5,0), and (1,4).
We need to follow these steps:Identify the boundary of the triangular region.Boundary critical points are candidates for the maxima and minima.Find the values of f(x,y) at the critical points and at the corners of the region.Compare the values obtained in step 3 to find the absolute maximum and minimum values of f(x,y) on the region.
Boundary of the regionThe boundary of the region is formed by the three line segments joining the vertices of the triangle. The segments are as follows:L1: (x, y) = (t, 0) for 1 ≤ t ≤ 5L2: (x, y) = (1, t) for 0 ≤ t ≤ 4L3: (x, y) = (4-t, t) for 0 ≤ t ≤ 4Note that L1 and L2 are parallel to the x-axis and y-axis, respectively. Also, L3 is a line joining (1,0) to (3,4).The boundary of the region is illustrated in the diagram below:Illustration of the triangular regionFind the boundary critical point along L3The point (5,0) is not on the boundary L3. The point (1,4) is on the boundary L3. We need to find the boundary critical point(s) along L3.
Therefore, we use the parameterization of the boundary L3: x = 4 - t, y = t.Substituting into the function f(x,y) = 3 + xy - 2y, we getg(t) = f(4-t, t) = 3 + (4-t)t - 2t = 3 + 2t - t^2We need to find the critical points of g(t) on the interval 0 ≤ t ≤ 4. Critical points are obtained by solving g'(t) = 0 for t. We haveg'(t) = 2 - 2tSetting g'(t) = 0, we obtaint = 1The value of g(t) at the critical point t = 1 isg(1) = 3 + 2(1) - 1^2 = 4Therefore, the boundary critical point along L3 is (3, 1) because x = 4 - t, and y = t, hence (3,1) = (4-t, t) = (1,4)
The given function is f(x, y) = 3 + xy - 2y.We needed to find the boundary critical point along the boundary between points (5, 0) and (1, 4). We identified the boundary of the triangular region and found that the boundary L3 is formed by the line segment joining the points (1, 4) and (5, 0).We used the parameterization of the boundary L3: x = 4 - t, y = t, and substituted it into the function f(x,y) to get g(t) = f(4-t, t) = 3 + (4-t)t - 2t = 3 + 2t - t^2. We found the critical point(s) of g(t) by solving g'(t) = 0 for t. The value of g(t) at the critical point was determined. Therefore, the boundary critical point along L3 is (3, 1).
The boundary critical point along the boundary between points (5,0) and (1,4) of the closed triangular region defined by the vertices (1,0), (5,0), and (1,4) is (3, 1).
To know more about critical point visit
https://brainly.com/question/7805334
#SPJ11
For the function:
y(x) = e^-x + e^x/2
this function is given a special name: "cosh(x)", or "hyperbolic cosine".
a) Determine any critical points of this function, and the inflection points (if any exist).
b) Compute the second derivative of y(x) (i.e. y" (x)), and compare it to y(x). How are these two functions related?
c) The first derivative of above function is given the name sinh(x), or "hyperbolic sine". Use your knowledge of the previous parts to compute, and give your answer in terms of cosh(x) or sinh(x):
d^10/dx^10 sinh (x)
d) Integrate y(x) over the interval [-1,1], by using the fundamental theorem of calculus. You do not need to use the sinh and cosh definitions for this.
a) x = i(pi/2) is an inflection point of y(x).
b) ) y''(x) =[tex]e^-x + e^x/2[/tex]
c) sinh(x) = cosh(x)/2
d) ∫(-1 to 1)y(x)dx =[tex]e^-1/2 - e^-1 + e^1/2 - e^1.[/tex]
Given function is[tex]y(x) = e^-x + e^x/2[/tex], which is called hyperbolic cosine or cosh(x).
a) Critical points:
[tex]y(x) = e^-x + e^x/2[/tex]
Critical points can be calculated by finding the derivative of y(x) and then equating it to zero.
[tex]y'(x) = -e^-x + (1/2)e^x[/tex]
= 0
Solving the above equation for x, we get x = ln(2).
Therefore, x = ln(2) is a critical point of y(x).
Inflection points: To find the inflection points, we need to find the second derivative of y(x).
[tex]y'(x) = -e^-x + (1/2)e^x[/tex] . . . . . . (1)
[tex]y''(x) = e^-x + (1/2)e^x/2[/tex] . . . . . . (2)
Now equate the equation (2) to zero.
[tex]e^-x + (1/2)e^x/2 = 0[/tex]
On solving the above equation, we get
[tex]e^x/2 = -e^-x/2[/tex]
x = i(pi/2) is an inflection point of y(x).
b) [tex]y''(x) = e^-x + (1/2)e^x/2y(x) \\= e^-x + e^x/2[/tex]
Comparing equation (1) and equation (2), we can see that the second derivative of y(x) is the sum of y(x) and y(x) multiplied by a constant.
c) The first derivative of y(x) is given by sinh(x).
[tex]sinh(x) = (1/2)(e^x - e^-x)[/tex]
From equation (1), we can write the value of e^x as
[tex]e^x = 2e^-x[/tex]
Therefore, sinh(x) can be written as sinh(x) = cosh(x)/2
d) The 10th derivative of sinh(x) is given by the following equation:
[tex]d^10/dx^10 sinh(x) = sinh(x) = (1/2)(e^x - e^-x)[/tex]
Therefore,[tex]d^10/dx^10 sinh(x) = cosh(x)/2.[/tex]
Integration of y(x) over the interval [-1,1]:
[tex]y(x) = e^-x + e^x/2[/tex]
Using the fundamental theorem of calculus, we have
∫(-1 to 1)y(x)dx =[tex](e^-1 + e^1/2) - (e^1 + e^-1/2)[/tex]
Therefore, ∫(-1 to 1)y(x)dx = [tex]e^-1/2 - e^-1 + e^1/2 - e^1.[/tex]
Know more about the inflection point
https://brainly.com/question/25918847
#SPJ11
5. (a) How many distinct 4-digit odd natural numbers are there? (Remark. 1 is not a four digit odd number.) (b) How many of these numbers have distinct digits? (That is none of their digits are equal.
There are 1125 distinct 4-digit odd natural numbers.
There are 2520 4-digit odd numbers with distinct digits.
(a) To determine the number of distinct 4-digit odd natural numbers, we need to consider the possible values for each digit.
For the thousands place (the leftmost digit), it cannot be zero since it is a 4-digit number. Hence, there are 9 options (1, 2, 3, 4, 5, 6, 7, 8, 9) for this digit.
For the hundreds, tens, and units places (the remaining three digits), they can take any odd digit (1, 3, 5, 7, 9) since we want odd numbers. So, there are 5 options for each of these three digits.
To calculate the total number of distinct 4-digit odd numbers, we multiply the number of options for each digit:
Number of options for thousands place = 9
Number of options for hundreds place = 5
Number of options for tens place = 5
Number of options for units place = 5
Total number of distinct 4-digit odd numbers = 9 × 5 × 5 × 5 = 1125
(b) To find the number of 4-digit odd numbers with distinct digits, we need to consider the possible values for each digit while ensuring that no digit is repeated.
For the thousands place, the same as before, there are 9 options (1, 2, 3, 4, 5, 6, 7, 8, 9) since it cannot be zero.
For the hundreds place, we have 8 options (excluding the digit used for the thousands place).
For the tens place, we have 7 options (excluding the digits used for the thousands and hundreds places).
For the units place, we have 5 options (odd digits).
To calculate the total number of 4-digit odd numbers with distinct digits, we multiply the number of options for each digit:
Number of options for thousands place = 9
Number of options for hundreds place = 8
Number of options for tens place = 7
Number of options for units place = 5
Total number of 4-digit odd numbers with distinct digits = 9 × 8 × 7 × 5 = 2520
Learn more about natural numbers here
https://brainly.com/question/17273836
#SPJ11
A person takes a trip, driving with a constant speed of 94.5 km/h, except for a 28.0-min rest stop. The person's average speed is 64.8 km/h. (a) How much time is spent on the trip? h (b) How far does the person travel? km
The person spends a total of 3.95 hours on the trip and travels a distance of 256.56 kilometers.
To calculate the time spent on the trip, we need to subtract the time spent at the rest stop from the total time. The person's average speed of 64.8 km/h gives us an indication of the time spent driving. Let's denote the time spent at the rest stop as t.
The distance traveled during the driving time can be calculated using the formula distance = speed × time. Given that the average speed is 64.8 km/h and the time spent driving is (t + 28.0) minutes, we can write the equation as (64.8 km/h) × (t + 28.0/60) hours.
Since the total distance traveled is equal to the sum of the distance traveled while driving and the distance traveled during the rest stop (which is zero), we can write the equation as distance = (64.8 km/h) × (t + 28.0/60) + 0 km.
We know that the total distance traveled is equal to the average speed multiplied by the total time spent, which is 94.5 km/h multiplied by (t + 3.95) hours.
By equating the two expressions for distance, we can solve for t, which gives us t ≈ 0.92 hours. Substituting this value into the equation for the total time, we find that the person spends approximately 3.95 hours on the trip.
To calculate the distance traveled, we can substitute the value of t back into the equation for distance. This gives us distance ≈ 94.5 km/h × (3.95 hours) ≈ 256.56 kilometers. Therefore, the person travels approximately 256.56 kilometers during the trip.
Learn more about equation here:
https://brainly.com/question/29657983
#SPJ11
The position of a particle moving along the x axis varies in time according to the expression x=3t2, where x is in meters and t is in seconds. Evaluate its position at the following times. (a) t=3.30 s m (b) t=3.30 s+Δt xf=m (c) Evaluate the limit of Δx/Δt as Δt approaches zero to find the velocity at t=3.30 s. m/s
Given information:Position of a particle moving along the x-axis varies in time according to the expression x = 3t², where x is in meters and t is in seconds.
To determine the position at the following times. a. t = 3.30 s, b. t = 3.30 s + Δt xf and c. Evaluate the limit of Δx/Δt as Δt approaches zero to find the velocity at t = 3.30 s. a. To find the position when t = 3.30 s, substitute t = 3.30 s in x = 3t².x = 3t² = 3(3.30)² = 32.67 metersTherefore, the position at t = 3.30 s is 32.67 meters.
b. To find the position when t = 3.30 s + Δt, substitute t = 3.30 s + Δt in x = 3t².x = 3t² = 3(3.30 s + Δt)² = 3(10.89 + 6.6Δt + Δt²) = 32.67 + 19.8Δt + 3Δt²Therefore, the position when t = 3.30 s + Δt is 32.67 + 19.8Δt + 3Δt².c. Velocity is given by Δx/Δt.Δx/Δt = [x(t + Δt) - x(t)]/ΔtBy substituting the given values, we have;Δx/Δt = [x(3.30 + Δt) - x(3.30)]/Δt= [3(3.30 + Δt)² - 3(3.30)²]/Δt= 19.8 + 6ΔtTaking the limit of Δx/Δt as Δt → 0, we have;Δx/Δt = 19.8 + 6(0)Δt = 19.8Therefore, the velocity at t = 3.30 s is 19.8 m/s.
To know more about Position visit:
https://brainly.com/question/23709550
#SPJ11
The annual per capita consumption of bottled water was 30.8 gallons. Assume that the per capita consumption of bottled water is approximately normally distributed with a mean of
30.8 and a standard deviation of 12 gallons.
a. What is the probability that someone consumed more than 31 gallons of bottled water?
b. What is the probability that someone consumed between 25 and 35 gallons of bottled water?
c. What is the probability that someone consumed less than 25 gallons of bottled water?
d. 97.5% of people consumed less than how many gallons of bottled water?
The answer of the probabilities are a) 49.93% b) 32.6% c) 31.46% d) 54.52 gallons
a. The mean of the distribution is μ = 30.8 gallons, and the standard deviation is σ = 12 gallons. We need to find the probability that someone consumed more than 31 gallons of bottled water. Using the Z-score formula, we have:
z = (x - μ) / σ = (31 - 30.8) / 12 = 0.02 / 12 = 0.0017
P(x > 31) = P(z > 0.0017) = 0.4993
Therefore, the probability that someone consumed more than 31 gallons of bottled water is approximately 0.4993 or 49.93%.
b. We need to find the probability that someone consumed between 25 and 35 gallons of bottled water. Again, using the Z-score formula, we have:
z₁ = (x₁ - μ) / σ = (25 - 30.8) / 12 = -0.48
z₂ = (x₂ - μ) / σ = (35 - 30.8) / 12 = 0.36
P(25 < x < 35) = P(z₁ < z < z₂) = P(z < 0.36) - P(z < -0.48) = 0.6406 - 0.3146 = 0.326
Therefore, the probability that someone consumed between 25 and 35 gallons of bottled water is approximately 0.326 or 32.6%.
c. We need to find the probability that someone consumed less than 25 gallons of bottled water.
z = (x - μ) / σ = (25 - 30.8) / 12 = -0.48
P(x < 25) = P(z < -0.48) = 0.3146
Therefore, the probability that someone consumed less than 25 gallons of bottled water is approximately 0.3146 or 31.46%.
d. We need to find the Z-score that corresponds to the 97.5th percentile of the distribution. Using a Z-score table, we find that this corresponds to a Z-score of 1.96.z = 1.96σ = 12μ = 30.8x = μ + zσ = 30.8 + 1.96(12) = 54.52
Therefore, 97.5% of people consumed less than approximately 54.52 gallons of bottled water.
Learn more about probabilities
https://brainly.com/question/29381779
#SPJ11
the two congruent sides of an isosceles triangle form the
In an isosceles triangle, the two https://brainly.com/question/28412104 form the two equal angles opposite those sides.
An isosceles triangle is a type of triangle that has two sides of equal length. The two congruent sides are referred to as the legs of the triangle, while the remaining side is known as the base. The key property of an isosceles triangle is that the angles opposite the congruent sides are also equal. This means that the triangle has two equal angles formed by the congruent sides and a third angle formed by the base.
To understand why the congruent sides form equal angles, consider the following: When two sides of a triangle are equal in length, it implies that the opposite angles they form are also equal. This is known as the Isosceles Triangle Theorem. In an isosceles triangle, the two congruent sides are equal in length, which means the angles opposite those sides must also be equal. Therefore, the two congruent sides of an isosceles triangle form the two equal angles opposite them.
Learn more about isosceles triangle here:
https://brainly.com/question/28412104
#SPJ11
. Let X1, X2,... be a sequence of independent uniform [0, 1] random variables. For a fixed constant CE [0, 1], define the random variable N by N = min{n: X,, > c}.
(a) Explain in just a few words how N relates to the X's and c.
(b) Is N independent of XN? Give an intuitive explanation as well as a rigorous one.
N relates to X's and c in a manner that N is the minimum number n for which the nth random variable Xn is greater than the constant c. This suggests that N is determined by the first n Xn values that are less than or equal to c, since we are taking the minimum of the sequence.
The random variable N and XN are not independent. Intuitively, if XN is less than c, then N cannot be equal to N. We have two cases: if XN < c, then N = N, while if XN > c, then N < N. This means that knowing XN gives information about N, which means they are not independent.
Furthermore, we can prove this rigorously by using conditional probability.
The random variable N is defined as N = min{n : Xn > c}, where X1, X2, X3, ... is a sequence of independent uniform [0, 1] random variables and C is a constant in the range [0, 1]. This implies that N is the minimum index n such that the nth random variable Xn is greater than c.
Since N is the minimum index such that Xn > c, we can say that N is determined by the first n Xn values that are less than or equal to c, as we are taking the minimum of the sequence.
To know more about conditional probability :
brainly.com/question/10567654
#SPJ11
The following refer to the following data set: 58.8 37.8 58.8 28.1 31.6 16.3 29.3 58.8 36.4 49.5
What is the arithmetic mean of this data set?
mean =
What is the median of this data set?
median =
What is the mode of this data set?
mode =
The arithmetic mean of the given data set is 41.86. The median of the data set is 37.8. There is no mode in this data set as all the values occur only once.
The arithmetic mean, or average, is calculated by summing up all the values in the data set and then dividing it by the total number of values. In this case, the sum of the values is 588.4, and since there are 10 values in the data set, the mean is 588.4/10 = 41.86.
The median represents the middle value when the data set is arranged in ascending or descending order. In this case, when the data set is arranged in ascending order, the middle value is 37.8, which becomes the median.
The mode of a data set refers to the value(s) that appear most frequently. In this data set, all the values occur only once, so there is no mode.
To learn more about mean click here: brainly.com/question/31101410
#SPJ11
Consider the equation sin(z)=cos(z) You know, visually from right triangles, that z=π/4 and z=3π/4 are solutions (up to multiples of 2π ). Are there any other (complex) solutions? Solve the equation to address this question. ( 20 points)
The solutions include
z = π/4 + π = 5π/4
z = π/4 + 2π = 9π/4
z = π/4 + 3π = 13π/4
These solutions cover all the possible complex solutions for the equation sin(z) = cos(z).
To solve the equation sin(z) = cos(z), we can use the trigonometric identity sin(z) = cos(z) when z = π/4 and z = 3π/4. However, we need to check if there are any other complex solutions as well.
Let's solve the equation algebraically to find all possible solutions:
sin(z) = cos(z)
Divide both sides by cos(z):
sin(z) / cos(z) = 1
Using the identity tan(z) = sin(z) / cos(z), we have:
tan(z) = 1
To find the solutions, we can take the inverse tangent (arctan) of both sides:
z = arctan(1)
The principal value of arctan(1) is π/4, which corresponds to one of the known solutions.
Now, let's consider the periodicity of the tangent function. The tangent function has a period of π, so we can add or subtract any multiple of π to the solution.
Therefore, the general solution is:
z = π/4 + nπ
where n is an integer representing any multiple of π.
So, in addition to z = π/4, the solutions include:
z = π/4 + π = 5π/4
z = π/4 + 2π = 9π/4
z = π/4 + 3π = 13π/4
...
These solutions cover all the possible complex solutions for the equation sin(z) = cos(z).
Learn more about solutions here
https://brainly.com/question/17145398
#SPJ11
Calculate the steady-state response associated with the following dynamical equation \( 2 x(t)+2 \dot{x}(t)=b \cos (5 t) \), at \( t=15 \), where \( b=62.9 \).
The steady-state response associated with the given dynamical equation at \(t = 15\) is given by [tex]\[x(15) = \frac{62.9}{-75 + 10j}\][/tex]
To calculate the steady-state response of the given dynamical equation, we need to find the value of [tex]\[x(15) = \frac{62.9}{-75 + 10j}\][/tex]Let's start by rewriting the equation in terms of the Laplace transform. The Laplace transform of a derivative is given by \(sX(s) - x(0)\), where \(s\) is the Laplace variable and \(X(s)\) is the Laplace transform of \(x(t)\). Taking the Laplace transform of both sides of the equation, we get:
[tex]\[2sX(s) + 2X(s) = \frac{b}{s^2 + 25}\][/tex]
Next, we can solve for \(X(s)\) by rearranging the equation:
[tex]\[X(s) = \frac{b}{2s^2 + 2s + 25}\][/tex]
To find the steady-state response, we need to evaluate \(X(s)\) at \(s = j\omega\), where \(\omega\) is the frequency of the input signal. In this case, the input signal is \(b\cos(5t)\), so \(\omega = 5\).
Substituting \(s = j\omega\) into the equation for \(X(s)\), we have:
[tex]\[X(j\omega) = \frac{b}{2(j\omega)^2 + 2(j\omega) + 25}\][/tex]
Simplifying the equation:
[tex]\[X(j\omega) = \frac{b}{-4\omega^2 + 2j\omega + 25}\][/tex]
Now, we can evaluate \(X(j\omega)\) at \(\omega = 5\):
[tex]\[X(j5) = \frac{b}{-4(5)^2 + 2j(5) + 25}\][/tex]
Simplifying further:
\[X(j5) = \frac{b}{-100 + 10j + 25}\]
\[X(j5) = \frac{b}{-75 + 10j}\][tex]\[X(j5) = \frac{b}{-100 + 10j + 25}\]\[X(j5) = \frac{b}{-75 + 10j}\][/tex]
Finally, we substitute the given value of \(b = 62.9\) into the equation:
\[X(j5) = \frac{62.9}{-75 + 10j}\]
To calculate the steady-state response at \(t = 15\), we need to find the inverse Laplace transform of \(X(j5)\). However, without knowing the initial conditions of the system, we cannot determine the complete response.
In summary, the steady-state response associated with the given dynamical equation at \(t = 15\) is given by:
[tex]\[x(15) = \frac{62.9}{-75 + 10j}\][/tex]
To learn more about equation, refer below:
https://brainly.com/question/29657983
#SPJ11
Calculate the z-test statistic for a hypothesis test in which the null hypothesis states that the population proportion, p. equals 0.11 if the following sample information is present.
n=250
x=39
(Round to two decimal places as needed.)
The z-test statistic for the given hypothesis test is -2.45. The test statistic value lies in the critical region, which indicates that we reject the null hypothesis.
Given,
n = 250 and
x = 39
We know that,
z = (x - μ) / (σ / √n) ----(1)
The formula for finding μ, the mean of the population proportion, is:
μ = np
Where n is the sample size and p is the population proportion.
Here,
n = 250 and
p = 0.11
So, μ = (250) (0.11) = 27.5
The formula for finding σ, the standard deviation of the population proportion, is:
σ = √[ np(1-p) ]
σ = √[ (250) (0.11) (0.89) ]
σ = 4.83
Using the values found for μ and σ in equation (1) yields:
z = (39 - 27.5) / (4.83 / √250)
z = 11.5 / 0.305
z = -2.45 (rounded to two decimal places)
Therefore, the z-test statistic for the given hypothesis test is -2.45. The test statistic value lies in the critical region, which indicates that we reject the null hypothesis.
To know more about statistic visit
https://brainly.com/question/31538429
#SPJ11
Select True or False from each pull-down menu, depending on whether the corresponding statement is true or false. 1. The mean of fifty sales receipts is 66.75 and the standard deviation is 10.55. Using Chebyshev's theorem, at least 75% of the sales receipts were between 45.65 and 87.85 2. While Chebyshev's theorem applies to any distribution, regardless of shape, the Empirical Rule applies only to distributions that are bell shaped and symmetrical. 3. According to Chebyshev's theorem, at least 93.75% of observations should fall within 4 standard deviations of the mean. 4. Chebyshev's theorem states that the percentage of observations in a data set that should fall within five standard deviations of the mean is at least 96%.
1. False 2. False 3. True 4. False. Chebyshev's theorem provides the proportion of observations that lie within k standard deviations of the mean.
Chebyshev's theorem provides a general statement about the proportion of observations that fall within a certain number of standard deviations from the mean in any distribution. However, it does not give specific values for these proportions. Therefore, the statement that at least 75% of the sales receipts were between 45.65 and 87.85 is false because it provides specific values based on the mean and standard deviation, which cannot be determined solely using Chebyshev's theorem.
The second statement is false as well. The Empirical Rule, also known as the 68-95-99.7 Rule, applies specifically to distributions that are bell-shaped and symmetrical. It states that approximately 68% of the data falls within one standard deviation of the mean, about 95% falls within two standard deviations, and around 99.7% falls within three standard deviations. Therefore, the Empirical Rule does not apply to all distributions, contrary to what the statement suggests.
The third statement is true. According to Chebyshev's theorem, regardless of the shape of the distribution, at least 93.75% of the observations will fall within four standard deviations of the mean. This theorem provides a lower bound on the proportion of observations within a certain range, and in this case, it guarantees that at least 93.75% of the data will be within four standard deviations of the mean.
Lastly, the fourth statement is false. Chebyshev's theorem does not provide a specific percentage for the observations within five standard deviations of the mean. It only guarantees that the percentage will be at least 1 - (1/5)^2 = 96%, which means that at least 96% of the observations will fall within five standard deviations from the mean, but it could be even higher.
Learn more about standard deviations here: brainly.com/question/29115611
#SPJ11
A two-sample t-test on paired data is a one-sample t-test on
data constructed using from the difference between the paired
observations.
is this true or false? explain
The statement is false. A two-sample t-test on paired data is not equivalent to a one-sample t-test on the differences between paired observations.
A two-sample t-test is used to compare the means of two independent groups. In this case, the data from each group are treated as separate samples, and the test determines whether there is a significant difference between the means of the two groups.
On the other hand, a one-sample t-test is used to compare the mean of a single sample to a known or hypothesized population mean. The data are taken from a single group, and the test determines whether the mean of the sample significantly differs from the hypothesized mean.
In the case of paired data, where observations are paired or matched in some way (e.g., before and after measurements on the same individuals), a paired t-test is appropriate. In this test, the differences between the paired observations are calculated, and the mean of these differences is compared to zero (or some hypothesized value) using a one-sample t-test. The goal is to determine if there is a significant difference between the paired observations.
So, while a one-sample t-test involves a single group and compares its mean to a known or hypothesized value, a two-sample t-test on paired data involves two groups and compares their means directly. The two tests are fundamentally different and cannot be interchanged.
Learn more about two-sample t-test here:
https://brainly.com/question/30778037
#SPJ11
Let the function g mapped from R2 -> R be a continuous function. Let some values for a, b be fixed and let a, b be elements in R. Let's define some fa(y) = g(a, y), where y is an element in R and kb(x) = f(x, b), where x is an element in R.
a. Construct a function g : R2 -> R that is finite at every (x, y) that's an element in R2 and where fa and kb are continuous on R for each a, b that is an element of R, but f is not continuous at (0, 0).
b. Prove that fa and kb are continuous on R
a. Function g : R2 → R that is finite at every (x, y) that's an element in R2 and where fa and kb are continuous on R for each a, b that is an element of R, but f is not continuous at (0, 0).
In order to achieve this, we can define the function g as: g(x, y) = 0 if (x, y) is not equal to (0, 0)g(x, y) = 1 if (x, y) = (0, 0)Then, fa(y) = g(a, y) will be continuous because the function g is constant along the vertical line x = a and kb(x) = f(x, b) will be continuous because f is continuous along the horizontal line y = b.
However, f is not continuous at (0, 0) because lim (x, y) → (0, 0) f(x, y) does not exist.
Therefore, we have constructed the required function g.
b. Proof that fa and kb are continuous on R We know that g is a continuous function on R2.
Now, we can prove that fa(y) is continuous on R by using the sequential criterion for continuity. Let {yn} be a sequence in R such that limn→∞ yn = y. Then, fa(yn) = g(a, yn) → g(a, y) = fa(y) as n → ∞ because g is a continuous function on R2.
Therefore, fa is continuous on R. Similarly, we can prove that kb(x) is continuous on R by using the sequential criterion for continuity. Let {xn} be a sequence in R such that limn→∞ xn = x. Then, kb(xn) = f(xn, b) → f(x, b) = kb(x) as n → ∞ because f is continuous along the horizontal line y = b.
Therefore, kb is continuous on R.
To learn more about element follow the given link
https://brainly.com/question/25916838
#SPJ11
Agree or Disagree with each of the following statements. Remember to justify your reasoning. a) For any function f[x] and numbers a and b, if ∫ a b f[x] x = 0, then f[x] = 0 for all x’s with a < x < b.
False, "For any function f[x] and numbers a and b, if ∫ a b f[x] x = 0, then f[x] = 0 for all x’s with a < x < b"
The antiderivative of a function f[x] that satisfies ∫ a b f[x] x = 0, which is F[x] = ∫ f[x] x, might not be zero. So, it's not accurate to claim that f[x] = 0 for all x’s with a < x < b based on ∫ a b f[x] x = 0.
For any function f[x] and numbers a and b, the statement "if ∫ a b f[x] x = 0, then f[x] = 0 for all x’s with a < x < b" is false. This is because the antiderivative of a function f[x] that satisfies ∫ a b f[x] x = 0, which is F[x] = ∫ f[x] x, may not be zero.
Hence, it's not accurate to conclude that f[x] = 0 for all x’s with a < x < b based on ∫ a b f[x] x = 0. As an example, consider the function f[x] = 1. Even though ∫ a b f[x] x = 0 for a = 0 and b = 1, f[x] = 1 and not zero. As a result, this statement is incorrect.
Learn more about antiderivative
https://brainly.com/question/33243567
#SPJ11
Find the sum: \( -5+2+9+\ldots+44 \) Answer:
The sum of given series is 198.
The given series is -5+2+9+.....+44.In this series, the first term (a) is -5, the common difference (d) is 7 and the last term (l) is 44.
We can find the last term using the formula:[tex]\[l = a + (n-1)d \]where n is the number of terms. Therefore, \[44 = -5 + (n-1)7 \] .[/tex]
Simplifying the equation, we get \[n = 9\]Therefore, there are 9 terms in this series.
Now, we can find the sum of this series using the formula:[tex]\[S_n = \frac{n}{2} (a + l) \].[/tex]
Substituting the values, we get: [tex]\[S_9 = \frac{9}{2} (-5 + 44) = 198\].[/tex]
Hence, the main answer is 198. We can write the conclusion as:Therefore, the sum of the given series -5+2+9+.....+44 is 198.
The series has a total of 9 terms. We used the formula for the sum of an arithmetic series to find the main answer.
The formula is[tex]\[S_n = \frac{n}{2} (a + l) \][/tex]where n is the number of terms, a is the first term, l is the last term and d is the common difference.
We substituted the values of a, l and n to find the sum. We also found that there are 9 terms in the series. Therefore, the answer is 198.
To know more about arithmetic series visit:
brainly.com/question/30214265
#SPJ11
28,44,26,41,46 Assuming that these ages constitute an entire populotion, find the standard deviation of the population. Round your answer to tino decimal places. (If necessary, consult a list of fommulas,)
The standard deviation of the given population ages, namely 28, 44, 26, 41, and 46, is approximately 8.29.
To find the standard deviation of a population, you can follow these steps:
Step 1: Find the mean of the population.
Step 2: Calculate the deviation of each data point from the mean.
Step 3: Square each deviation.
Step 4: Find the mean of the squared deviations.
Step 5: Take the square root of the mean of squared deviations to obtain the standard deviation.
Let's calculate the standard deviation for the given population: 28, 44, 26, 41, 46.
Step 1: Find the mean (average) of the population.
Mean = (28 + 44 + 26 + 41 + 46) / 5 = 37
Step 2: Calculate the deviation of each data point from the mean.
Deviation for each data point:
28 - 37 = -9
44 - 37 = 7
26 - 37 = -11
41 - 37 = 4
46 - 37 = 9
Step 3: Square each deviation.
Squared deviations:
[tex](-9)^2[/tex]= 81
[tex]7^2[/tex] = 49
[tex](-11)^2[/tex]= 121
[tex]4^2[/tex] = 16
[tex]9^2[/tex] = 81
Step 4: Find the mean of the squared deviations.
Mean of squared deviations = (81 + 49 + 121 + 16 + 81) / 5 = 68.8
Step 5: Take the square root of the mean of squared deviations.
Standard deviation = √68.8 ≈ 8.29 (rounded to two decimal places)
Therefore, the standard deviation of the given population is approximately 8.29.
Learn more about standard deviation here:
https://brainly.com/question/29115611
#SPJ11
Assume the random variable x is normally dislributed with mean μ=89 and slandard deviation σ=5. Find the indicated probability P(73
Given that x is normally distributed with a mean of μ = 89 and a standard deviation of σ = 5, we need to find the probability that [tex]P(73 < x < 83).[/tex] For this, we need to standardize the normal distribution using z-score. The formula for finding z-score is:
[tex]z = (x - μ)/σ = (73 - 89)/5 = -3.2[/tex]
Similarly, for z-score at
[tex]x = 83,z = (x - μ)/σ = (83 - 89)/5 = -1.2[/tex]
Now, using a standard normal distribution table, we can find the area under the curve corresponding to these z-scores.
[tex]P(z < -3.2) = 0.0007[/tex] (from the table) [tex]P(z < -1.2) = 0.1151[/tex] (from the table)
Therefore,
[tex]P(-3.2 < z < -1.2) = P(73 < x < 83)= P(z < -1.2) - P(z < -3.2)= 0.1151 - 0.0007= 0.1144[/tex]
Therefore, the probability that
[tex]P(73 < x < 83) is 0.1144.[/tex]
To know more about probability visit:
https://brainly.com/question/31828911
#SPJ11
Consider a Poisson distribution with
= 9.
(Round your answers to four decimal places.)
(a)Write the appropriate Poisson probability function.
f(x) =
(b)
Compute f(2).
f(2) =
(c) Compute f(1).
f(1) =
(d)
Compute
P(x ≥ 2).
P(x ≥ 2) =
In a Poisson distribution with a mean of 9, the appropriate Poisson probability function is used to calculate the probabilities of different outcomes. The function is denoted as f(x), where x represents the number of events.
(a) The appropriate Poisson probability function is given by:
f(x) = (e^(-λ) * λ^x) / x!
Here, λ represents the mean of the Poisson distribution, which is 9.
(b) To compute f(2), we substitute x = 2 into the probability function:
f(2) = (e^(-9) * 9^2) / 2!
(c) Similarly, to compute f(1), we substitute x = 1 into the probability function:
f(1) = (e^(-9) * 9^1) / 1!
(d) To compute P(x ≥ 2), we need to calculate the sum of probabilities for x = 2, 3, 4, and so on, up to infinity. Since summing infinite terms is not feasible, we often approximate it by calculating 1 minus the cumulative probability for x less than 2:
P(x ≥ 2) = 1 - P(x < 2)
The calculation of P(x < 2) involves summing the probabilities for x = 0 and x = 1.
In summary, the appropriate Poisson probability function is used to calculate probabilities for different values of x in a Poisson distribution with a mean of 9. These probabilities can be computed by substituting the values of x into the probability function.
Additionally, the probability of x being greater than or equal to a specific value can be calculated by subtracting the cumulative probability for x less than that value from 1.
Learn more about probabilities here:
https://brainly.com/question/32004014
#SPJ11
You and a friend are playing a game with a pair of six sided dice. To determine a winner, you each roll the dice and total them. Your friend wins if the total is 5, 6, 7 or 8. You win if the total is 2, 3, 4, 9, 10, 11 or 12. Is the game fair? Why or why not? Use what you have learned about probability so far to defend your choice.
The game in question is not a fair game. There are a total of 36 different possible outcomes that could occur from rolling a pair of six-sided dice.
In order for the game to be considered fair, each player would need to have an equal probability of winning.
Let's take a look at the probability of each player winning the game : Your friend will win if the total is 5, 6, 7, or 8. There are a total of[tex]4 + 5 + 6 + 5 = 20[/tex] ways to obtain these totals when rolling two six-sided dice.
Therefore, the probability of your friend winning is 20/36 or 5/9.You will win if the total is 2, 3, 4, 9, 10, 11, or 12. There are a total of [tex]1 + 2 + 3 + 4 + 3 + 2 + 1 = 16[/tex] ways to obtain these totals when rolling two six-sided dice.
Therefore, the probability of you winning is 16/36 or 4/9.Since 5/9 and 4/9 are not equal, the game is not fair. Your friend has a higher probability of winning the game.
To know more about game visit :
https://brainly.com/question/32185466
#SPJ11
