FLAMING OR ALBERT .........

Answer:

a the balloon becomes negatively charged

When a charge balloon brought closer to the wall, they will repel each other. Option C is correct.

Electric Charge:

It shows the degree at which the atom or object has less or more electron than proton.

An atom with extra electrons than proton has negative charge while atoms will less electron than proton has positive charge.

Opposite charge always attracts while similar charges repel each other. Since both wall and balloon are negatively charged.

Therefore, when a charge balloon brought closer to the wall, they will repel each other.

To know more about Electric Charge:

https://brainly.com/question/8163163

Answer: Debbie exerts applied force on the first cart.

Explanation:

The first cart exert applied force on the second cart.

Answer:

C. 10⁻³ rads

Explanation:

Here, we shall use Rayleigh's Criterion to find out the angular resolution of Cat's eye during day light. Rayleigh's Criterion is written as follows:

θ = λ/a

where,

θ = angular resolution of Cat's eye = ?

λ = wavelength = 500 nm = 5 x 10⁻⁷ m

a = slit width of eye = 0.5 mm = 5 x 10⁻⁴ m

Therefore,

θ = (5 x 10⁻⁷ m/5 x 10⁻⁴ m)

Therefore,

θ = 0.001

θ = Sin⁻¹(0.001)

θ = 0.001 rad = 1 x 10⁻³ rad

Hence, the correct answer is:

C. 10⁻³ rads

Answer:

T = 104.2 N

Explanation:

For this exercise we must define a coordinate system, the x axis is horizontal and the y axis is vertical, let's write the equilibrium equations on each axis

X axis

         T₁ₓ-T₂ₓ = 0

         T₁ₓ = T₂ₓ                           (1)

y axis  

         [tex]T_{1y}[/tex] + T_{2y} - W = 0

          T_{1y} + T_{21y} = W      (2)

Let's use trigonometry to find the decomposition of the stresses, they indicate that the angle between the two forces is 140º, but each force has an angle of 70º

           cos 70 = T₁ₓ / T₁

           T₁ₓ = T₁ cos 70

           sin 70 = [tex]T_{1y}[/tex] / T₁

           T_{1y} = T₁ sin 70

for tension 2 we have a similar equation

            T₂ₓ = T₂ cos 70

             T_{2y} = T₂ sin 70

From equation 1

        T₁ cos 70 = T₂ cos 70

        T₁ = T₂

therefore the two children apply the same force

From equation 2

        T sin 70 + T sin 70 = W

        2 T sin 70 = W

        T = W / 2sin 70

        T = 196 / (2 sin 70)

        T = 104.2 N

the two children have the same strength

Answer:

As already mentioned, the mechanical energy of an object can be the result of its motion (i.e., kinetic energy) and/or the result of its stored energy of position (i.e., potential energy). The total amount of mechanical energy is merely the sum of the potential energy and the kinetic energy.

Explanation:

Explanation:

so sorry

don't know but please mark me as brainliest please

Answer:

dx = 2000 [m]

Explanation:

To solve this problem we must use the following equation of kinematics.

[tex]dx =v_{o}*t +\frac{1}{2} *a*t^{2}[/tex]

where:

dx =  distance [m]

Vo = initial velocity = 100 [m/s]

a = acceleration = 20 [m/s²]

t = time = 10 [s]

dx = 100*10 + 0.5*20*10²

dx = 2000 [m]

Note: the positive sign in the above equation means that the car is increasing its velocity.

Answer:

Different organelles play different roles in the cell — for instance, mitochondria generate energy from food molecules; lysosomes break down and recycle organelles and macromolecules; and the endoplasmic reticulum helps build membranes and transport proteins throughout the cell.

Explanation:

Hopefully this helped!

Answer: D) All of the above

Explanation:

Answer:

Put some melted plastic over the print and let it harden

Explanation:

I think that's how the police do it

Answer:

66.7s

Explanation:

Given parameters:

Distance between Mars and Earth  = 2 x 10¹⁰m

Unknown:

Time it takes for light to travel  = ?

Solution:

The speed of light is given as 3 x 10⁸m/s

 Now;

   Speed  = [tex]\frac{distance}{time}[/tex]  

    Time  = [tex]\frac{distance}{speed}[/tex]

Insert the parameters and solve;

   Time  = [tex]\frac{2 x 10^{10} }{3 x 10^{8} }[/tex]   = 66.7s

Answer:

The balanced condition for Wheatstones bridge is  

Q

P

​  

=  

S

R

​  

as is obvious from the given values.

No, current flows through galvanometer is zero.

Now, P and R are in series, so

Resistance,R  

1

​  

=P+R

=10+15=25Ω

Similarly, Q and S are in series, so

Resistance R  

2

​  

=R+S

=20+30=50Ω

Net resistance of the network as R  

1

​  

 and R  

2

​  

 are in parallel

i=  

R

V

​  

=  

50

6×3

​  

=0.36 A.

Explanation:

Answer:

(a) ω = 1.57 rad/s

(b) ac = 4.92 m/s²

(c) μs = 0.5

Explanation:

(a)

The angular speed of the merry go-round can be found as follows:

ω = 2πf

where,

ω = angular speed = ?

f = frequency = 0.25 rev/s

Therefore,

ω = (2π)(0.25 rev/s)

ω = 1.57 rad/s

(b)

The centripetal acceleration can be found as:

ac = v²/R

but,

v = Rω

Therefore,

ac = (Rω)²/R

ac = Rω²

therefore,

ac = (2 m)(1.57 rad/s)²

ac = 4.92 m/s²

(c)

In order to avoid slipping the centripetal force must not exceed the frictional force between shoes and floor:

Centripetal Force = Frictional Force

m*ac = μs*R = μs*W

m*ac = μs*mg

ac = μs*g

μs = ac/g

μs = (4.92 m/s²)/(9.8 m/s²)

μs = 0.5

Answer:

280.6N

Explanation:

According to Newton's second law;

Force = mass * acceleration

Given

Mass = 280kg

velocity = 10m/s

Time = 10 secs

Acceleration = velocity?/Time

Force = mass * velocity/time

Force = 280 + (16-10/10)

Force = 280 + 0.6

Force = 280.6N

Hence the force exerted by the snowmobile to accelerate is 280.6N

Answer:168 N

Explanation:

Answer:

6.64 Newtons

On the moon that 40 kg child would have a weight of 6.64 Newtons (kg multiplied by gravity) because the moon's gravity is 1/6th of the Earth's gravity. Your mass on any planet on the solar system (Jupiter, Venus, Earth, or anywhere else) is the same because the amount of matter in you does not change.

Explanation:

This question is incomplete, the complete question is;

Unpolarized light passes through two Polaroid sheets. The transmission axis of the second polarizing filter makes an angle of 34° with the axis of the first polarizer. What fraction of the original unpolarized light is transmitted through the second polarizing filter?

Answer: the fraction of the original unpolarized light transmitted through the second polarizing filter is 0.343

Explanation:

We know that when Unpolarized light passes through first polarizer, it's intensity will be reduced to half  i.e

I1 = I0/2

Now after that when light passes through 2nd polarizer, Intensity will be;

I2 = I1 × (cos A1)²  

but  I1 = I0/2

so

I2 = (I0/2) × (cos A1)²

I2/I0 = 0.5 × (cos A1)²

In the question we were given that; The transmission axis of the second polarizing filter makes an angle of 34° with the axis of the first polarizer

so A = 34°

so we substitute

I2/I0 = 0.5 × (cos 34)²

I2/I0 = 0.343

Therefore the fraction of the original unpolarized light transmitted through the second polarizing filter is 0.343

Answer:

Explanation:

potential energy of water is converted into heat energy

P E = mgh = m x 9.8 x 111

= 1087.8 m .

Let rise in temperature θ

m x s x θ = heat absorbed

m x s x θ =  1087.8 m

m x 4182 x θ =  1087.8 m

θ = 0.26 degree celsius .

Answer:

The speed of the projectile upon returning to its starting point is 50 m/s.

Explanation:

Given;

initial velocity of the projectile, u = 50 m/s

The velocity of the projectile is maximum before hitting the ground. As the object moves upward, the velocity reduces as it approaches the maximum height, at the maximum height the velocity becomes zero. Also, as the object moves downward, the velocity starts to increase and becomes maximum before hitting the ground.

Therefore, the speed of the projectile upon returning to its starting point is 50 m/s.

Answer:

Its momentum is multiplied by a factor of 1.25

Explanation:

First, we calculate the initial velocity of the object:

With that velocity we can calculate the initial momentum of the object:

Then we calculate the velocity of the object once its kinetic energy has increased:

And calculate the second momentum of the object:

Finally we calculate the factor:

Answer:

The correct answer is:

a) remain where it is released

Explanation:

The concept of density seeks to measure the weight of an object in relation to its size. It is the measure of how packed together the particles of that object are. An object placed in a liquid displaces a certain volume of the liquid, based on the relative density of the object and the liquid.

If an object is less dense than a liquid in which it is placed, it displaces a smaller volume of the liquid than its volume, hence only some part of the object will be seen to be under the liquid, the other part will float.

If an object is denser than the liquid in which it is placed, it displaces a larger volume of the liquid than its own volume, making the object to sink and is submerged, sometimes to the bottom of the liquid, but mostly below the point at which it was released.

Finally, if the density of an object and the liquid into which it is submerged is the same. the object's mass per unit volume is the same as the liquid's mass per unit volume, hence the weight and force created due to density will balance and cancel each other out hence making the object to remain where it was submerged.

Answer:

A: Linear

Explanation:

Formula for Resistance of a metallic conductor is given as;

R = R_o(1 + αΔT)

Where;

R_o is the original resistance

R is the final resistance after change in temperature

ΔT is change in temperature

α is coefficient of linear expansion

Now, from the formula given, we can see that the change in resistance is directly proportional to the change in temperature.

Thus, the higher the final temperature, the more the change in resistance and the lower the final temperature, the lesser the change in resistance.

Thus, for temperature less than zero, since the change is resistance is directly proportional to the temperature, it means it follows a linear relationship.

Answer:

the answer is b

Explanation:

An expression for the displacement as a function of time is x(t) = a sin wt.

Displacement is defined as the change in position of an object. It is a vector quantity and has a direction and magnitude. The spacing between two specified points is represented by displacement, a one-dimensional measure commonly known as length or distance.

Given in the question we have to find the displacement of the as function of time

The equation used of express displacement is.

d = V i t + 1 2 a t 2  

Displacement = Final position – initial position = change in position.

so, x = A sin wt is equation where A is amplitude and t is time period.

An expression for the displacement as a function of time is x(t) = a sin wt.

Thus, an expression for the displacement as a function of time is x(t) = a sin wt.

To learn more about displacement refer to the link:

brainly.com/question/11934397

#SPJ2

Answer:

I = - 0.135 kg m/s

Explanation:

The formula to calculate the impulse of delivered to the ball is:

I = Ft

where,

I = Impulse delivered to the ball by hole = ?

F = Force = ma (By Newton's Second Law)

t = time

Therefore,

I = mat

where,

m = mass of ball = 0.05 kg

a = acceleration of ball = (Vf - Vi)/t

Therefore,

I = m[(Vf - Vi)/t]t

I = m(Vf - Vi)

where,

Vf = Final velocity = - 1.3 m/s

Vi = Initial Velocity = 1.4 m/s

Therefore,

I = (0.05 kg)(- 1.3 m/s - 1.4 m/s)

I = - 0.135 kg m/s

Answer: If you want me to write them for you here they are

Explanation:

Net force causes  change in motion because  a net external force causes a change in motion; thus, we see that a net external force causes acceleration.

Not more likely to be Net force motion because if it doesnt say change then its gonna stay the same so Net force does cause change in a motion because  take for example if you are going to bounce a basketball its gonna change its position from one place to another thats how Net force causes Change in motion.  

Hope this helps :)

The cart is pulled at a constant velocity, so it is in equilibrium. In particular, the net horizontal force is zero, and consists of only the pulling force and friction such that

p - f = 0

where p and f denote the magnitudes of the pulling force and friction.

So we have

p - 12 N = 0

p = 12 N

Answer:

Explanation:

mass number is now 4 times less than the original value so alpha decay occur during alpha decay the mass number is decreased 4 times and atomic number decreased 2 times than the original value