Answer:
lm.ao i was stuck too when i was on that
Explanation:
what u need to know sis?
speed, being a scalar quantity, is the rate at which an object covers distance. The average speed is the distance (a scalar quantity) per time ratio. Speed is ignorant of direction. On the other hand, velocity is a vector quantity; it is direction-aware. Velocity is the rate at which the position changes.
If a chemical reaction begins with 23 atoms of sodium, how much sodium will be present at the end of the reaction?
HURRRY PLEASEEEEE!!!
In photosynthesis, what two compounds are produced during the light-dependent reaction then used in the light-independent reaction?
A) ATP and NADPH
B) ATP and ADP
C) NADP+ and ADP
D) NADPH and NADP+
Answer:
The answer choice is: A) ATP and NADPH
Explanation:
Your question is asking the components that are created during light - dependent reaction, and then used in independent reaction. That would be shown in the photo below!
ATP and NADPH is created from light dependent then transfered and transformed into different components from the calvin cycle (light independent cycle)
Two compounds are produced during the light-dependent reaction then used in the light-independent reaction - A) ATP and NADPH
Photosynthesis is a process that takes place in the Chloroplast of plant cells. Autotrophs obtain their energy source (food) in the presence of sunlight.
The photosynthesis process occurs in two distinct stages; light-dependent reaction and light-independent reactions.
the light reactions take place in the thylakoid membranes of chloroplasts.The light-dependent reactions use light energy to make two molecules needed for the next stage of photosynthesisThese molecules are the energy storage molecule ATP and the reduced electron carrier NADPH.Thus, two compounds are produced during the light-dependent reaction then used in the light-independent reaction - A) ATP and NADPH
Learn more about:
https://brainly.com/question/12343562
Which is a vector quantity?
A distance
B. time
C.mass
D.velocity
Can anyone help,please?
Answer:
D. Velocity
Explanation:
Vector, in physics, a quantity that has both magnitude and direction. It is typically represented by an arrow whose direction is the same as that of the quantity and whose length is proportional to the quantity's magnitude. Although a vector has magnitude and direction, it does not have position.
Speed is a scalar quantity – it is the rate of change in the distance travelled by an object, while velocity is a vector quantity – it is the speed of an object in a particular direction.
Select all that change when adding or subtracting a Proton
Question 1 options:
Atomic Mass
Atomic Number
Charge
Which Element the atom is
I NEED ANSWER ASAP PLZ HELP!!!
Answer:
Explanation:
To the atomic mass;
1. Atomic mass is the number of protons + neutrons;
When a new proton is added, the atomic mass increases.
When a proton is removed, the atomic mass reduces
The mass of an atom is concentrated in the nucleus where there is the proton and neutron.
2. Atomic number is the number of protons:
When a new proton is added, the atomic number increases
When a new proton is removed, the atomic number reduces
3. Charge:
An atom is neutral if the number of positive charges is the same as negative charges:
Protons = electrons
If :
Protons > electrons = +Ve charges
Protons < electrons = -Ve charges
Select the correct words from the drop-down menus to complete the sentence.
The
v work of a machine can never exceed the
work because
some of the work.
uses
Answer:
1. C
2. B
3. B
Explanation:
Took assignment on edge
The
plz help i beg, veryyy confused :)
When we look at a book in the sunlight, what must happen to the light for our eyes to see the book?
Answer:
Sometimes you can see light from the Sun passing through clouds and the sunbeams appear as straight lines. After light has been reflected off an object, such as a tree or a book, it still travels in straight lines, but in a new direction.
Explanation:
It is considered aerobic dance if you dance 3-4 times a week for at least 45 minutes each time.
Question 2 options:
True
False
Answer:
yes
Explanation:
yes
So I just did the quiz and I just guessed cause I couldn't find a straight answer but I was right. the answer is
TRUE
~
YES, it was considered aerobic dance if you dance 3-4 times a week for at least 45 minutes each time.
A tennis ball is dropped from 1.3 m above
the ground. It rebounds to a height of
0.943 m.
With what velocity does it hit the ground?
The acceleration of gravity is 9.8 m/s². (Let
down be negative.
Answer in units of m/s.
part 2 of 3
Answer:
2.65m/s
Explanation:
Using the equation of motion:
v² = u²+2a∆S where
v is the final velocity
u is the initial velocity
∆S is the change in distance
a is the acceleration
Given
u = 0m/s
a = 9.8m/s²
∆S = 1.3-0.943
∆S = 0.357m
Substituting the given parameters into the formula
v² = 0²+2(9.8)(0.357)
v² = 0+6.9972
v² = 6.9972
v=√6.9972
v = 2.65m/s
Hence the velocity at which it hit the ground is 2.65m/s
second. Give answer in km/hr
1) Calculate the speed at which a wheel is traveling if it has a radius of 30cm and an angular speed of 20 radians per
Calculate the volume of the following: (V=lwh)
A rectangular prism that is 10.0cm long, 4.0 cm wide, and 2.0 cm high.
Answer:
V= 80 cm^3
Explanation:
V= 10 * 4* 2
V= 80 cm^3
Subduction zones are found at ________ plate boundaries. *
5 points
ocean to continental convergent
Transform
ocean to continental divergent
continental to continental divergent
Answer:
A. Ocean to continental convergent
What is the rate which distance changes over time.
Answer: Speed
Explanation:
Speed is Defined as defined as D/T or distance over time
Which two options are forms of potential energy?
O A. Electrical energy
B. Elastic energy
O C. Magnetic energy
D. Light energy
O E. Sound energy
A. Electrical energy B. Elastic energy are the forms of potential energy.
What is potential energy?Potential energy is the energy possess by an object because due to its position relative to other objects, stresses within itself, its electric charge, or other factors.
Types of Potential energy:
Elastic potential energy - It is stored in objects that can either be stretched or compressed. The more the object is stretched or compressed, the more elastic potential energy it will have. A classic example is a stretched rubber bandElectric potential energy - Is the energy that is needed to move a charge against an electric field. We need more energy to move a charge in the electric field, but also more energy to move it through a stronger electric field.Therefore,
Electrical energy , Elastic energy are the forms of potential energy.
Learn more about Potential energy here:
https://brainly.com/question/7674744
#SPJ5
13. What change in state occurs when a liquid changes into a solid?
Answer:
heat occurs to change into solid
Answer:
It's freezing or solidification
Explanation:
The coldness freezes the water making it a solid, like water to an ice cube. Take Disney's Frozen by example. Elsa has a ice touch, so when she touches water, it becomes a solid.
An object is dropped from a 32 m tall building. How fast will it be going when it
strikes the ground?
Answer:
If there is no air resistance, it would be
25.04 m/sec when it hits the ground
a car is driven 1.5 kilometers west in 2 minutes. what is the velocity in m/s?
A car is driving down the highway at a 50 m/s. Suddenly, the driver sees an accident and slams on his breaks, coming to a complete stop in 10 seconds. How far did the car travel before coming to a stop?
Given parameters:
Speed of the car = 50m/s
Time = 10s
Unknown:
Distance traveled before the car stopped = ?
We need to establish speed - time - distance relationship.
Speed is the rate of change of distance with time. It is a scalar quantity .
Mathematically;
Speed = [tex]\frac{distance}{time}[/tex]
Distance = speed x time
Input the parameters and solve;
Distance = 50 x 10 = 500m
The car traveled 500m before it stopped.
4. Prove that:
a.
The unit of pressure is a derived unit.
Explanation:
The pascal (symbol: Pa) is the SI derived unit of pressure used to quantify internal pressure, stress, Young's modulus and ultimate tensile strength. It is defined as one newton per square metre. It is named after the French polymath Blaise Pascal
Which example is of researcher bias in interpreting data?
A scientist wishes to determine the area of an ice sheet. To do so, he relies on spectrographic images sent by satellite.
A health official investigates the spread of HIV in her city. She takes a census of the HIV status of every adult resident.
A geologist wants to determine whether the water level of an aquifer is declining. To find the answer, he digs a well.
A researcher seeks to prove that babies smile at two months old. She counts some confused expressions as smiles.
Answer:
A researcher seeks to prove that babies smile at two months old. She counts some confused expressions as smiles.
Explanation:
This is the answer because its not actual date due to the fact she's using her opinion to decided whether or not the expression a baby is making is a smile, whereas the other answers had factual data involved.
If you know the answer please answer the following question down in the picture below.
Answer:
the answer is C
I hope I helped (◍•ᴗ•◍)❤
If an automobile travels at 30 m/sec for 2 minutes, the car have traveled ?
Answer:
1800 times 2= 3600
Explanation:
Convert 2.5 mm to micrometers
Answer:
2500
Explanation:
Answer:
2500
Explanation: 1 mm is 1000 micrometers pls give me brainlist
_SF4 + _H2O -> _H2SO3 + _HE
Answer:
SF4 + 3H2O → H2SO3 + 4HF
Explanation:
I found it
If a person pulls a cart to the right at 5N of force and another person pulls to the left with a 15N of force? What is the net force and it what direction
Answer:
The net force is 10 [N] acting to the left
Explanation:
To solve this type of problem we must make a sum of the forces acting on the cart, since the forces are vectors, we know that vectors can be added, In this way forces that go in the same direction are added and forces in opposite directions are subtracted.
FL = force to the left = - 15 [N]
FR = force to the right = 5 [N]
FT = Resultant force [N]
- 15 + 5 = FT
FT = - 10 [N]
The negative sign tells us that the force acts to the left.
3
Select the correct answer
A kilogram is an si unit. Which quantity might you measure in kilograms?
О А.
temperature
B.
mass
C. length
D.
electric current
Reset
Next
Answer:
mass
.
Explanation:
Answer:
It would be B
Explanation:
A general contractor drives 5 miles to the hardware store in 10 minutes. He shops for needed tools for 30 minutes, then drives to his customer’s home at an average speed of 45 mph. He arrives 20 minutes later. Calculate the average speed from the time the contractor leaves his office to the time he arrives at his customer’s home.
Given parameters:
Distance to hardware shop = 5 miles
Time to reach hardware shop = 10 minutes
Time spent at the shop = 30 minutes
Average speed to customer home = 45 mph
Time taken for the travel = 20 minutes
Unknown:
Average speed of the contractor = ?
Solution:
Average speed is the total distance covered divided by the total time taken.
Average speed = [tex]\frac{total distance}{total time taken}[/tex]
total distance = distance to hardware shop + distance to customer's home
We do not know the distance to customer's home but we have been given the speed and time, so we can find the distance.
Distance = speed x time
Convert the time to hrs and solve;
60 minutes = 1 hr
20 minutes = [tex]\frac{20}{60} hr[/tex] = [tex]\frac{1}{3} hr[/tex]
So, Distance = 45mph x [tex]\frac{1}{3} hr[/tex] = 15miles
Now;
Total distance = 5 + 15 = 20miles
Total time = time to reach hardware shop + time to reach customer's house
= 10 + 20
= 30 minutes
Convert the time from minutes to hrs;
60 minutes = 1hr
30 minutes = [tex]\frac{30}{60}[/tex] = 0.5hr
So;
Average speed = [tex]\frac{20}{0.5}[/tex] = 40mph
The average speed is 40mph
A mass is dropped from a height h above the ground, and freely falls under the influence of gravity. Which graphs here correctly describes the displacement and velocity of the object during the time the object is falling? Consider the "up" direction to be positive.
Which graph is it?
Answer:
B
Explanation:
The only force acting on the block is gravity, so the block has a constant, negative acceleration. This means the velocity of the block is decreasing at a constant rate, so the answer is B, D, or E. Velocity is the rate of change of displacement, and answer choice B is the only one that has a displacement graph that matches that idea.
Answer: Graph B here correctly describes the displacement and velocity of the object during the time the object is falling. Option B is correct.
It is given that the mass of an object is dropped from height 'h' above the ground and "up" direction is taken to be positive.
It is required to find the graph which describes the displacement and velocity of the object during the time the object is falling.
Which graphs here correctly describes the displacement and velocity of the object during the time the object is falling?If any body falls freely towards the ground, then its acceleration is decreasing constantly with respect to time. That means velocity of an object will also be decreased as shown in graph B. Also we know that velocity is the rate of change of displacement.
As it is given in question that up direction is positive then it is also considered that downward be negative means decreasing.
Therefore, both the quantities are decreasing. So graph B correctly describes the displacement and velocity of the object during the time the object is falling.
Learn more about the graph between displacement and velocity here:
https://brainly.com/question/1594094
#SPJ5
Question: Carbon Dioxide is a serious danger because if causes...?
Answer:
Symptoms of carbon dioxide toxicity include high blood pressure, flushed skin, headache and twitching muscles
Hope this helps :)
why light waves are called electromagnetic waves ?
