Answer:
Explanation:
initial velocity, u = 0
final velocity, v = 18 m/s
time = 20 sec
acceleration, a = v - u / t
= 18 - 0 / 20
= 18 / 20
= 9 / 10
= 0.9 m/s^2
Hope this helps
plz mark as brainliest!!!!!!
If an ant can move at a speed of 1.2mm/s, calculate the time taken by
it to travel 1km.
Answer:
Work shown below!
Explanation:
[tex]Time=\frac{Distance}{Speed} =\frac{1km}{1.2mm/s}=\frac{1}{1.2}=0.8333333[/tex]
What is an element and comepounds
Answer:
Explanation:
Element: consists of only one kind of atom, can't be broken down into a simple type of matter by either physical or chemical means and can consist as either atoms or molecules
Compound: consists of atoms of two or more different elements bound together, can be broken down into simpler types of matter by chemical means BUT not by physical means, has properties that are different from its component elements and always contain the same ratio of its component atoms.
What is the potential energy of a 2kg plant that is on a windowsill 1.3m high?
Answer:
P.E = 25.48 Joule
Explanation:
Here,
mass (m) = 2kg
height (h) = 1.3m
g = 9.8m/s^2
P.E = mgh
= (2) (9.8) (1.3)
P.E = 25.48 Joule
Thus, the potential energy of a 2kg plant that is on a windowsill 1.3m high is 25.48 Joule
-TheUnknownScientist
Write one use of magnetic force and frictional force
Answer:
1.Magnetic Force - Used in cranes to separate metal junk from junkyards.
2.Frictional Force- Helps us to walk.
The diagram shows an electric generator containing an electromagnet when the generator is working, what is in the wire?
A. Electric current
B. Chemical energy
C. Permanent magnets
D. Small batteries
Answer:
its electric current
Explanation:
You are running and want to drop an object that you're carrying into a box. You must let go of the object:
a. before the object passes over the box
b. after the object passes over the box
c. just as the object is passing over the box
Answer:
a. before the object passes over the box
Explanation:
To let in the object into the box, you must drop the object before its passes over the box.
This form of problem is a projectile motion. Dropping the object before it passes over the box will direct it into box at an angle. The object will drop in the box if it is dropped after passing or just as it passes over the box.2. A squirrel runs 15 m to the north and finds an acorn. The squirrel then turns back to the south
and runs 8 m, at that point he decides to change direction and runs 24 m to the east to bury his
acorn.
Answer:
24 m to the right/ to the east
A 515-kg roller coaster is at the bottom of a loop with a radius of 10 m. If the speed at the
Bottom of the loop is 20 m/s, what is the force of the track pushing up on the vehicle at this
point?
Answer:
20600N
Explanation:
Given parameters:
Mass of the roller coaster = 515kg
radius = 10m
Speed = 20m/s
Unknown:
Force of the track pushing up on the vehicle = ?
Solution:
The force pulling the roller coaster along the track is the centripetal force.
To find the centripetal force, use the expression below;
F = [tex]\frac{mv^{2} }{r}[/tex]
where;
m is the mass
v is the speed
r is the radius
Now insert the parameters and solve;
F = [tex]\frac{515 x 20^{2} }{10}[/tex] = 20600N
When an atom that has no charge looses two electrons it becomes a
Answer: it becomes a positive ion
Explanation:
So, when an atom loses 2 electrons there will be no change in the number of neutrons. Therefore, an isotope will not form. Thus, it is concluded that when an atom with no charge loses two electrons, it becomes a positive ion.
Answer:
a positive ion
Explanation:
unbalanced forces make an object:
A.accelerate
B.move at a constant speed
C.explode
D.come to rest
Answer:
i would have to say B makes the most sense
Explanation:
where can nuclear fusion be found
Answer:
In the core of stars
Explanation:
Nuclear fusion is usually found in the cores of stars.
In nuclear fusion, there is a combination of atomic nuclei to form a larger one.
The process is accompanied with the release of a large amount of energy. The energy released is used to set up another fusion reaction. In the sun, two hydrogen nuclei are combining to give a helium nuclei with the release of a large amount of energy.Answer:
Nuclear fusion of hydrogen to form helium occurs naturally in the sun and other stars.
How long does it take for a hook to reach the top of a building if the velocity is 50 m/s
Answer:
how tall is building
Explanation:
A net force of 12.0 N causes an object to increase its speed from 15.0 m/s to 18.0 m/s during a 2.0 second interval. What is the mass of the object?
Answer:
Mass of object = 8kg
Explanation:
Since a= change in v/ change in t, a= (18-16)/2= 1.5
And F=ma Force =12a= 1.5m=?You can now solve for your unknown value of mass.
A net force of 12.0 N causes an object to increase its speed from 15.0 m/s to 18.0 m/s during a 2.0 second interval. The mass of the given object 8 Kg.
What is force?
A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.
Since a = change in v/ change in t,
a = (18-16)/2
a = 1.5
Force, f = ma
mass, m = F/a
m = 12/1.5
m = 8 Kg.
A net force of 12.0 N causes an object to increase its speed from 15.0 m/s to 18.0 m/s during a 2.0 second interval. The mass of the given object 8 Kg.
To learn more about force refer to the link:
brainly.com/question/13191643
#SPJ2
A quarterback can throw a 0.430 kg football at 75 m/h.
a. How much kinetic energy does the quarterback have to give to the
ball in order to give it that much kinetic energy?
Answer:
9.48*10^-5JExplanation:
Step one:
given data
mass of ball m=0.43kg
speed v= 75m/h >>>>> to m/s = 75*0.00027
v =0.021m/s
Required
the kinetic energy KE
Step two
applying
KE= 1/2mv^2
KE= 1/2*0.43*(0.021)^2
KE= 0.5*0.43*0.0004.41*10^-4
KE=0.000094815
KE=9.48*10^-5J
The kinetic energy is 9.48*10^-5J
If mass1 of a student is 70 kg and mass of the Jupiter is 1.901 x 10^27 kg 1
and the distance between them is 6.98 x 10^7 m. Calculate for the Force
of Gravity in Newtons.
Answer:
lol girly same
Explanation:
What process uses atomic particles of carbon and uranium to determine exact age?
a--Radioactive dating
b--Law of superposition
c--Relative dating
d--Geologic time
Answer: Radioactive dating
Explanation: I took the test, and use the other answer, and got it wrong. The test told me that this is the correct one.
Answer:
Radioactive dating
I took the test recentley :)
A box is sitting on a very slightly
slanted shelf. It has remained still,
despite the slant. Suddenly, the box
slides off the shelf. This sudden
movement must be due to...?
A. The mass of the box
B. The weight of the shelf
C. Unbalanced forces
D. A ghost
Which two actions could you take to weaken an electromagnet?
A. Use a wooden core instead of a steel core.
B. Replace a 9 V battery with a 3 V battery.
O C. Decrease the length of the connecting wires in the circuit.
D. Increase the number of wraps of wire around the core.
E. Include an ammeter in the circuit.
Answer:
a and b
Explanation:
first one breaks it and second one directly makes it weaker
Answer:
A and B
Explanation:
took the test
Plz help Select ALL of the objects that are accelerating?
1 An apple falling off of a tree that speeds up as it falls towards the ground
2 A racecar driving at a speed of 100 miles/hour as it goes around a curve in the racetrack
3 A beam of light traveling from the sun to the Earth at a speed of -300,000,000 meters/second
4 A bus that is slowing down as it approaches the bus stop
What is a gene?
A.
A segment of a protein
B.
A segment of a DNA molecule
C.
A series of amino acids
D.
A series of DNA molecules
Answer:B. A segment of a DNA molecule
Explanation:
Why is an iron bolt attracted to a magnet?
A. When it is in a magnetic field, it becomes a temporary magnet.
B. It becomes a temporary magnet, whether or not it is in a magnetic
field.
C. It is attracted to Earth's magnetic field, which is always present.
D. When it is in a magnetic field, it becomes a permanent magnet.
Please, asap
Answer:
A. When it is in a magnetic field, it becomes a temporary magnet.
Explanation:
An iron bolt is attracted to a magnet because when in a magnetic field, the iron becomes a temporary magnet.
This is because the iron aligns their electrons in the magnetic fields.
This causes that attraction between the magnet and the iron. Metals like iron are said to be ferromagneticUnpaired electrons in iron spin in such a way that they align with the magnetic fields of the magnet.Water (density = 1x10^3 kg/m^3) flows at 15.5 m/s through a pipe with radius 0.040 m. The pipe goes up to the second floor of the building, 3.5 m higher, and the pressure remains unchanged. What is the speed of the water flow in the pipe on the second floor?
Answer:
The speed of the water flow in the pipe on the second floor is approximately 13.1 meters per second.
Explanation:
By assuming that fluid is incompressible and there are no heat and work interaction through the line of current corresponding to the pipe, we can calculate the speed of the water floor in the pipe on the second floor by Bernoulli's Principle, whose model is:
[tex]P_{1} + \frac{\rho\cdot v_{1}^{2}}{2}+\rho\cdot g\cdot z_{1} = P_{2} + \frac{\rho\cdot v_{2}^{2}}{2}+\rho\cdot g\cdot z_{2}[/tex] (1)
Where:
[tex]P_{1}[/tex], [tex]P_{2}[/tex] - Pressures of the water on the first and second floors, measured in pascals.
[tex]\rho[/tex] - Density of water, measured in kilograms per cubic meter.
[tex]v_{1}[/tex], [tex]v_{2}[/tex] - Speed of the water on the first and second floors, measured in meters per second.
[tex]z_{1}[/tex], [tex]z_{2}[/tex] - Heights of the water on the first and second floors, measured in meters.
Now we clear the final speed of the water flow:
[tex]\frac{\rho\cdot v_{2}^{2}}{2} = P_{1}-P_{2}+\rho \cdot \left[\frac{v_{1}^{2}}{2}+g\cdot (z_{1}-z_{2}) \right][/tex]
[tex]\rho\cdot v_{2}^{2} = 2\cdot (P_{1}-P_{2})+\rho\cdot [v_{1}^{2}+2\cdot g\cdot (z_{1}-z_{2})][/tex]
[tex]v_{2}^{2}= \frac{2\cdot (P_{1}-P_{2})}{\rho}+v_{1}^{2}+2\cdot g\cdot (z_{1}-z_{2})[/tex]
[tex]v_{2} = \sqrt{\frac{2\cdot (P_{1}-P_{2})}{\rho}+v_{1}^{2}+2\cdot g\cdot (z_{1}-z_{2}) }[/tex] (2)
If we know that [tex]P_{1}-P_{2} = 0\,Pa[/tex], [tex]\rho=1000\,\frac{kg}{m^{3}}[/tex], [tex]v_{1} = 15.5\,\frac{m}{s}[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] and [tex]z_{1}-z_{2} = -3.5\,m[/tex], then the speed of the water flow in the pipe on the second floor is:
[tex]v_{2}=\sqrt{\left(15.5\,\frac{m}{s} \right)^{2}+2\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (-3.5\,m)}[/tex]
[tex]v_{2} \approx 13.100\,\frac{m}{s}[/tex]
The speed of the water flow in the pipe on the second floor is approximately 13.1 meters per second.
how do you find Speed and Velocity? (formula)
Basically speed is equal to distance divided by time
Explanation:
velocity is just speed and direction
DESPERATE WILL GIVE BRAINLIST AND THANKS
The Cenozoic Era was the “age of the dinosaurs.”
Question 2 options:
True
False
When you put the iron cube in the olive oil and the brick cube in the water what loses heat more quickly and why? The oil or the water? Explanation why oil or water.
Answer:
Oil
Explanation:
The oil will lose heat more quickly compared to water. This is because oil has a lower specific heat capacity compared to water.
Specific heat capacity is the amount of heat require to raise the temperature of 1kg of a substance by 1k. Water requires a high amount of heat to attain this level and it will have high specific heat capacity. Such substance takes time to gain heat and also will take time to loose the heat. Oil has a lower specific heat capacity. It gains and loses heat easily.Calculate the final velocity of a 12Kg object falling 20 m.
Answer:
19.80 m/s
Explanation
you just multiply the acceleration of gravity by the amount of time since it was let go of. So you get: velocity = 19. 80 m/s^2 * time, or V = gt. The negative sign just means that the object is moving downwards.
help asap please!
calculate the answer to the correct number of significant digits.
-3.22 x 5.1
Which factor does not affect the strength of an electromagnet?
O A. The number of coils of wire
O B. The material of the core
C. The placement of the ammeter in the circuit
O D. The number of batteries added to the circuit
C. The placement of the ammeter in the circuit
what's the turtle's velocity??
Answer:
[tex]\boxed {\boxed {\sf v\approx0.24 \ m/s}}[/tex]
Explanation:
Velocity can be found by dividing the displacement by the time.
[tex]v=\frac{displacement}{time}[/tex]
The displacement is 4.77 meters and the time is 19.5 seconds.
[tex]displacement=4.77 \ m \\time=19.5 \ s[/tex]
Substitute the values into the formula.
[tex]v=\frac{4.77 \ m }{19.5 \ s}[/tex]
Divide.
[tex]v=0.244615385 \ m/s[/tex]
Let's round to the nearest hundredth (just to make the answer more concise).
The 4 in the thousandth place tells us to leave the 4 in the hundredth place.
[tex]v\approx0.24 \ m/s[/tex]
The velocity of the turtle is about 0.24 meters per second.
In the periodic table, where can the atomic mass of an element be found?
Answer:
protons + neutrons
Explain:
Is equivalent to the number of protons and neutrons in the atom
Answer:
The atomic mass of an element is underneath the symbols whereas for Li or Lithium it is 6.94 then for B or Boron it is 10.81.
Explanation:
So in otherwords the atomic mass is right under the symbol of an element.
