Decide which of the following statements are true and which are false.
True False: Real gas molecules behave most ideally at low temperature and high pressure.
True False: Ideal gas molecules have small volumes and exert weak attractive forces on one another.
True False: At constant temperature, the heavier the gas molecules, the smaller the average velocity.
True False: In order for two separate 1.0 L samples of O2(g) and H2(g) to have the same average velocity, the O2(g) sample must be at a lower temperature than the H
2(g) sample.
True False: At constant temperature, the heavier the gas molecules, the larger the average kinetic energy.
True False: As temperature decreases, the average kinetic energy of a sample of gas molecules decreases.

Answer:

Explanation:

A balanced chemical equation refers to the reaction taking place whereby the number of atoms associated in the reactants side is equivalent to the number of atoms on the products side.

From the given information, the balanced equations are as follows:

[tex]\mathbf{(a) \ \ \ Ti(s) + O_{2(g)} \to TiO_{2(s)}}[/tex]

[tex]\mathbf{(b) \ \ \ 2Ag_{2}O \to 4Ag_{(s)} + O_{2(g)}}[/tex]

[tex]\mathbf{(c) \ \ \ 2C_3H_7OH + 9O_2 \to 6CO_2+8H_2O}[/tex]

[tex]\mathbf{(d) \ \ \ 2C_5 H_{12}O \to 10 CO_2 + 12 H_2O}[/tex]

Answer:

a) The energy transferred is 6.91 kJ

b) The internal energy is 4.90 kJ

c) The work done on the gas is - 2.01 kJ

Explanation:

Step 1: Data given

Number of moles of hydrogen gas = 2.00 moles

Pressure = constant

Temperature is heated from 294 K to 414 K

Molar heat capacity of hydrogen gas = 28.8 J/mol*K

Step 2: Calculate the energy transferred to the gas by heat.

Q = n* Cp * ΔT

⇒with Q =the energy transferred

⇒with n = the number of moles = 2.00 moles

⇒with Cp = the Molar heat capacity of hydrogen gas = 28.8 J/mol*K

⇒ with ΔT = Temperature 2 - Temperature 1 = 414 - 294 = 120K

Q = 2.00 * 28.8 * 120

Q = 6912 J = 6.91 kJ

Step 3: Calculate the increase in its internal energy.

ΔEint = n*Cv*ΔT

⇒with ΔEint = the increase in its internal energy.

⇒with n = the number of moles = 2.00 moles

⇒with Cv = The constant volume = 20.4 J/mol*K

⇒with  ΔT = Temperature 2 - Temperature 1 = 414 - 294 = 120K

ΔEint = 2.00 * 20.4 * 120

ΔEint =4896 J = 4.90 kJ

Step 4: Calculate the work done on the gas.

Work done on the gas = -Q + ΔEint

W = -6.91 kJ + 4.90 kJ

W = -2.01 kJ

Answer:

22.1

Explanation:

Step 1: Calculate the number of formula units of lithium nitrate

A 5.08 L solution contains 2.68 × 10²¹ formula units per liter.

5.08 L × 2.68 × 10²¹ formula units/1 L = 1.36 × 10²² formula units

Step 2: Calculate the number of nitrate ions

Lithium nitrate dissociates completely in water according to the following equation.

LiNO₃(aq) ⇒ Li⁺(aq) + NO₃⁻(aq)

The molar ratio of LiNO₃ to NO₃⁻ is 1:1. The number of nitrate ions is 1/1 × 1.36 × 10²² = 1.36 × 10²².

Then,

log (1.36 × 10²²) = 22.1

The number of nitrate ions are present in the following aqueous solution is 13.6x10²¹, and log(base 10) value of this is 22.2.

Those salts which are completely dissociate into their ions in the solution form will known as strong electrolyte.

Lithium nitrate is a strong electrolyte and it shows complete dissociation as:

LiNO₃ → Li⁺ + NO₃⁻

Given that,

1 liter of solution containing = 2.68 x 10²¹ formula unit

5.08 L of solution containing = 5.08 x 2.68 x 10²¹ = 13.6x10²¹ formula unit

So, number of nitrate ion in given solution = 13.6x10²¹ formula unit

Log(13.6x10²¹) = 22.1

Hence, required values are 13.6x10²¹ and 22.1.

To know more about strong electrolytes, visit the below link:
https://brainly.com/question/5547666

Answer:

Aerate solution

Explanation:

aerate solution is the best way to remove CO2 from water (Carbon dioxide in the water that does not form bicarbonates is “uncombined” and can be removed by aeration).

Answer:

a. Decrease

b. Increase

c. Increase

d. No effect

Explanation:

Glycolysis is present in muscle cells which converts glucose to pyruvate, water and NADH. It produces two molecules of ATP. Cellular respiration produces more molecules of ATP from pyruvate in mitochondria. Glycolysis increases in pyruvate kinase.

a. Loss of binding site for fructose 1,6-bisphosphate in pyruvate kinase: Decrease

b. Loss of allosteric binding site for ATP in pyruvate kinase: No effect

c. Loss of allosteric binding site for AMP in phosphofructokinase: Increase

d. Loss of regulatory binding site for ATP in phosphofructokinase: Increase

A. An important substrate in the glycolysis pathway is fructose 1,6-bisphosphate. It stimulates pyruvate kinase, an essential enzyme in glycolysis. The amount of pyruvate kinase that is activated will decrease if the fructose 1,6-bisphosphate binding site in pyruvate kinase is eliminated. As a result the rate of glycolysis in the muscle cells will probably decrease.

B. The allosteric ATP binding site of pyruvate kinase controls how active the enzyme is. However, pyruvate kinase is not significantly regulated by ATP in muscle cells. Therefore, it is unlikely that deletion of the ATP-binding allosteric site in pyruvate kinase would have no effect on the rate of glycolysis in muscle cells.

C. The rate-limiting enzyme in glycolysis, phosphofructokinase, is activated from all forms by AMP. It increases the rate of glycolysis by stimulating the activity of phosphofructokinase. If the allosteric binding site for AMP is eliminated, phosphofructokinase activation will be reduced. As a result, the rate of glycolysis in muscle cells will decrease.

D. Phosphofructokinase is inhibited allosterically by ATP. It regulates the rate of glycolysis by a feedback mechanism. High ATP concentrations cause phosphofructokinase to bind to its regulatory site, limiting its activity and delaying glycolysis. If the regulatory binding site for ATP is eliminated, the inhibitory action of ATP on phosphofructokinase would be lost. As a result, muscle cells will glycolysis at a faster rate.

Learn more about glycolysis, here:

https://brainly.com/question/26990754

#SPJ6

Answer:

information is missing

Explanation

reaction is needed to solve the problem

Answer:

D

Explanation:

We have to bear in mind that the acid is a weak acid. A weak acid does not dissociate completely in solution. We will have more concentration of undissociated acid than A^- and H3O^+ and OH^- in the system at equilibrium.

Being a weak acid, there is maximum concentration of water molecules followed by that of undissiociated acid.

Hence, for this solution, the concentration of ions in solution follows the order;

[H2O] > [HA] > [A-] ~ [H3O ] > [OH-]

Answer:

K+ClKCl

Explanation:

because the reaction is between metal Potassium and Non-metal Chlorine

Answer:

Explanation:

a) It is a redox reaction because KCl is an ionic compounds with K having a + charge and Cl having a - charge. Originally, both have an oxidation state of 0 and not K has 1+ and Cl has 1-. Therefore, one species was oxidized and one was reduced which is indicative of a redox reactions.

b)

2K + Cl2 => 2KCl

Answer:

[tex]\boxed {\boxed {\sf 0.566 \ mol \ Fe}}[/tex]

Explanation:

We are asked to convert a number of atoms to moles.  

We can convert atoms to moles using Avogadro's Number, which is 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance. In this problem, the particles are atoms of iron (Fe). There are 6.022 ×10²³ atoms of iron in 1 mole of iron.  

We use dimensional analysis to convert atoms to moles. This involves setting up ratios. Use Avogadro's Number and the underlined information to make a ratio.

[tex]\frac {6.022 \times 10^{23}\ atoms \ Fe}{1 \ mol \ Fe}[/tex]

We are converting 3.41 × 10²³ atoms of iron to moles, so we multiply by this value.

[tex]3.41 \times 10^{23} \ atoms \ Fe *\frac {6.022 \times 10^{23}\ atoms \ Fe}{1 \ mol \ Fe}[/tex]

Flip the ratio. It stays equivalent, but it allows the units of atoms of iron to cancel.

[tex]3.41 \times 10^{23} \ atoms \ Fe *\frac{1 \ mol \ Fe} {6.022 \times 10^{23}\ atoms \ Fe}[/tex]

[tex]3.41 \times 10^{23}*\frac{1 \ mol \ Fe} {6.022 \times 10^{23}}[/tex]

[tex]\frac{3.41 \times 10^{23}} {6.022 \times 10^{23}} \ mol \ Fe[/tex]

[tex]0.5662570575\ mol \ Fe[/tex]

The original measure ment of iron atoms ( 3.41 × 10²³ ) has 3 significant figures, so our answer must have the same. For the number we calculated, that is the thousandths place. The 2 in the ten-thousandths place ( 0.5662570575) tells us to leave the 6 in the thousandths place.

[tex]0.566 \ mol \ Fe[/tex]

3.41 × 10²³ atoms of iron is equal to approximately 0.566 moles of iron.

Answer:

1:Part A.

[tex]\bold{42.2 g C_{12}H_{22}O_{11} \:in \:528 g H₂O}[/tex]

Mass Percent=[tex]\bold{\frac{Mass\: of \:Solute}{Mass\: of \:Solution}×100\%}[/tex]

=[tex]\frac{42.2}{528}*100\%=\bold{\underline{7.99\: or \:8\%}}[/tex]

Part B.

[tex]\bold{198\:m g\: C_{6}H_{12}O_{6} \:in\:4.71 g\: H₂O}[/tex]

mass of solute: 198mg

mass of solvent :4.71g=4710g

Mass Percent=[tex]\bold{\frac{Mass\: of \:Solute}{Mass\: of \:Solution}×100\%}[/tex]

=[tex]\frac{198}{4710}*100\%=\bold{\underline{4.20\%}} [/tex]

Part C.

[tex]\bold{8.85 g NaCl \:in \:190 g\: H₂O}[/tex]

Mass Percent=[tex]\bold{\frac{Mass\: of \:Solute}{Mass\: of \:Solution}×100\%}[/tex]

=[tex]\frac{8.85}{190}*100\%=\bold{\underline{4.66\%}}[/tex]

Answer:

It will help you !!!!!!!!!!

how many electrons does tin have?

Answer : 2, 8, 18, 18, 4

Therefore, total electrons = 50

Answer:

A chemical bond is a lasting attraction between atoms, ions or molecules that enables the formation of chemical compounds. The bond may result from the electrostatic force of attraction between oppositely charged ions as in ionic bonds or through the sharing of electrons as in covalent bonds.

Explanation:

You have to put energy into a molecule to break its chemical bonds. The amount needed is called the bond energy. After all, molecules don't spontaneously break

Answer:

Remove 1 electron

Explanation:

In the atom of each element, there are three subatomic particles viz: proton, neutron and electron. The number of proton (positively charged) and electron (negatively charged) determines the charge of that element. The more the proton, the more positively charged an ion is and vice versa for electron.

According to this question, a neutral atom of lithium (Li) with atomic no. 3 is given i.e. a lithium atom with charge 0. To make the lithium atom's charge change to +1, ONE ELECTRON MUST BE REMOVED OR LOST.

Note that, the proton number (atomic number) of an element does not change, rather the electron number changes in relation to the no. of protons.

Answer:

a. 1 mole of acid is equal to one equivalent.

b. 1.00 moles of HCl are found.

c. 1L of 2.00M NaOH is needed to reach the equivalence point

Explanation:

HCl reacts with NaOH as follows:

HCl + NaOH → NaCl + H2O

Where 1 mole of HCl reacts with 1 mole of NaOH. The reaction is 1:1

a. As the reaction is 1:1, 1 mole of acid is equal to one equivalent

b. The initial moles of HCl are:

1.00L * (2.00moles HCl / 1L) = 2.00 moles of HCl

At the halfway point, the moles of HCl are the half, that is:

1.00 moles of HCl are found

c. At equivalence point, we need to add the moles of NaOH needed for a complete reaction of the moles of HCl. As the moles of HCl are 2.00 and the reaction is 1:1, we need to add 2.00 moles of NaOH, that is:

2.00moles NaOH * (1L / 2.00mol) =

1L of 2.00M NaOH is needed to reach the equivalence point

Answer:

Part A

HCOOH(aq) + NaOH(aq) → HCOONa(aq) + H2O(l)

Part B

ClCH2CH2CO2H(aq) + NaOH(aq) ------> ClCH2CH2CO2Na(aq) + H2O(l)

Explanation:

The reaction between an alkanoic acid and a base is a neutralization reaction. The reaction occurs as follows;

RCOOH + NaOH ----> RCOONa + H2O

We have to note the fact that the net ionic reaction still remains;

H^+(aq) + OH^-(aq) ---> H2O(l)

In both cases, the reaction can occur and they actually do occur as written.

Answer:

75

Explanation:

is the answer for your question

Answer:

See detailed explanation.

Explanation:

Hey there!

In this case, according to the given information, it turns out possible for us to solve this problem by firstly calculating the moles of each element, assuming those percentages are masses, so that we divide by their molar masses:

[tex]C=\frac{18.63}{12.01}=1.55\\\\H=\frac{1.56}{1.01} =1.55\\\\O=\frac{24.82}{16.00}=1.55\\\\Cl=\frac{54.99}{35.45}=1.55[/tex]

Then, we divide all of them by 1.55 to realize the empirical formula is:

[tex]CHOCl[/tex]

Whose molar mass is 64.47 g/mol, and therefore, since the molar mass of these two is the same, we infer the molecular formula is also CHOCl.

The Lewis structure is shown on the attached document, whereas, the central atom is C and it does complete its octet as well as both O and Cl.

Regards!

Answer:

Biphenyl

Explanation:

The reaction of bromo benzene with magnesium-ether solution yields a Grignard reagent.

The byproduct of this reaction is biphenyl. It is formed when two unreacted bromobenzene molecules are coupled together.

Hence, It is advised that the bromobenzene solution be added slowly to the magnesium-ether solution so that it isn't present in a high concentration, thus reducing the amount of biphenyl by-product formed.

Answer:

A. Cation

B. Ne

Explanation:

The ion is positively charged by 2, making it a cation.

The electron configuration of the nearest noble gas Neon is 1s22s22p6

1. A monatomic ion with a charge of 2 has an electronic configuration of 1s22s22p6 is Neon.

2. chemical symbol of the noble gas is Kr (krypton).

Isoelectronic atom or ion has the same number of valence electrons. Krypton has 36 electrons and 36 protons (atomic number 36).

Neon is a chemical element with the symbol Ne and atomic number 10. It is a noble gas. Neon is a colorless, odorless, inert monatomic gas under standard conditions, with about two-thirds the density of air. It was discovered (along with krypton and xenon) in 1898 as one of the three residual rare inert elements remaining in dry air after nitrogen, oxygen, argon, and carbon dioxide were removed. Neon was the second of these three rare gases to be discovered and was immediately recognized as a new element of its bright red emission spectrum. The name neon is derived from the Greek word, the neuter singular form of  (neos), meaning 'new'. Neon is chemically inert, and no uncharged neon compounds are known. The compounds of neon currently known include ionic molecules, molecules held together by van der Waals forces, and clathrates.

Learn more about Neon

https://brainly.com/question/22129884

#SPJ2

Answer:

lower the activation energy needed to start the reaction.

Explanation:

The activation energy is defined as the energy barrier that stands between reactants and products.

An enzyme is a biological catalyst. Catalysts are known to lower the activation energy of a reaction.

Hence, a catalyst lowers the activation energy of the reaction. The lower the activation energy of a reaction, the faster the reaction is expected to be.

Answer:

B

Explanation:

Ammonia is considered a base as it's pH is 11

Answer from Gauthmath

The  compound NH3 (Ammonia) can be classified as a weak Base. Below you can learn more about Ammonia.

Ammonia is a chemical compound which is derived from the combination of Nitrogen and Hydrogen. It is denoted by the chemical formula NH3.

Ammonia is a base and when it reacts with acids to gives out salts. Physically, It is a colorless gas with a distinct characteristic of a pungent smell.

Learn more about Ammonia at  https://brainly.com/question/14445062

#SPJ9

Complete Question  

Complete Question is attached below

Answer:

Option A

[tex]D=A[/tex] And [tex]C>A[/tex]

Explanation:

From the question, we are told that:

The Chemical Reaction

 [tex]2A_{aq}+B_{aq} \leftrightarrow 3C_{aq}+2D_{aq}[/tex]

Generally, the equation for Equilibrium constant is mathematically given by

 [tex]K=\frac{C^c*D^d}{A^a*B^b}[/tex]

Therefore

 [tex]K=\frac{C^3*D^d}{A^2*B^b}[/tex]

Hence we conculde

 [tex]D=A[/tex] And [tex]C>A[/tex]

Therefore Option A

Answer:

Quantization is the process of constraining an input from a continuous or otherwise large set of values (such as the real numbers) to a discrete set (such as the integers).

Explanation:

Quantization refers to the situation where an electromagnetic field consists of discrete energy parcels, photons.

In Chemistry , the concept that a system cannot have any possible energy value but instead is limited to certain specific energy values (states). This states depend on the specific system in question.

Under this system, Energy could be gained or lost only in integral multiples of some smallest unit of energy, a quantum (the smallest possible unit of energy).

Hence, Quantization refers to the situation where an electromagnetic field consists of discrete energy parcels, photons.

Learn more about Quantum here ;

https://brainly.com/question/16746749

#SPJ2

Answer:

We need chemistry in nursing because it deals with various kinds of drugs and the reactions of these drugs on the human body as well as with each other.

The question is incomplete, the complete question is shown in the image attached to this answer.

Answer:

a) Br^-

b) FeCl3

c) slower

d) see the first attached image

Explanation:

Aromatic compounds undergo electrophilic substitution sections in the presence of the appropriate electrophile.

In the reaction above, the Br^- nucleophile attacks the Lewis acid FeCl3. Recall that the nitro group is meta directing hence the incoming Br^+ electrophile is directed towards the meta position as shown in the image attached.

Note that the nitro group deactivates the ring towards electrophilic substitution hence the reaction is slower with nitrobenzene than with unsubstituted benzene.

Answer:

See explanation

Explanation:

The IUPAC name of aspirin is 2-Acetoxybenzoic acid. It is composed of an acetoxy moiety and a benzoic acid moiety.

The compound can be hydrolysed under prolonged storage conditions to yield acetic acid which causes the vinegar like odour.

Also, one of the products of this hydrolysis bears a phenol group which reacts with FeCl3 to give a purple color.

Answer:

a. The conjugate base of an acidic buffer will accept hydrogen protons when a strong acid is added to the solution.

b. An acidic buffer solution is a mixture of a weak acid and its conjugate base.

e. The weak acid of an acidic buffer will donate hydrogen protons when a strong base is added to the solution.

Explanation:

Which of the statements correctly describe the properties of a buffer?

a. The conjugate base of an acidic buffer will accept hydrogen protons when a strong acid is added to the solution. TRUE. The conjugate base neutralizes the excess of hydrogen protons.

b. An acidic buffer solution is a mixture of a weak acid and its conjugate base. TRUE.

c. An acidic buffer solution is a mixture of a weak base and its conjugate acid. FALSE. This is a basic buffer solution.

d. The weak acid of an acidic buffer will accept hydrogen protons when a strong base is added to the solution. FALSE. The weak acid will react with the hydroxyl ions from the added base.

e. The weak acid of an acidic buffer will donate hydrogen protons when a strong base is added to the solution. TRUE. These hydrogen protons will form water.

f. The conjugate base of an acidic buffer will donate hydrogen protons when a strong acid is added to the solution. FALSE. It will accept hydrogen protons.

Answer: The thermal energy that would be released by 276.0g of sodium acetate trihydrate is 71.8kJ.

Explanation:

Supercooling is the process of lowering the temperature a liquid below its freezing point, without it becoming solid. A liquid below its freezing point will crystallize in the presence of a seed crystal because it serves as a structure for formation of crystals. From the question,

The given mass of sodium acetate trihydrate

(CH3COONa.3H2O)= 276.0g

Molar mass of sodium acetate

trihydrate= 136.08g/mol

Thermal heat of fusion of sodium acetate

trihydrate = 35.9 kJ/mol

From the given mass the number of moles present= 276.0/ 136.08

= 2.0moles

Therefore the heat (thermal) energy of the given mass of sodium acetate

trihydrate = 2.0 × 35.9

= 71.8kJ

Therefore, upon addition of a small seed crystal, the solution temperature increases as sodium acetate trihydrate crystallizes.

Answer:

[tex]\boxed {\boxed {\sf 0.078 \ L }}[/tex]

Explanation:

We are asked to find the volume of a solution given the moles of solute and molarity.

Molarity is a measure of concentration in moles per liter. It is calculated using the following formula:

[tex]molarity= \frac{moles \ of \ solute}{liters \ of \ solution}[/tex]

We know there are 0.14 moles of potassium chloride (KCl), which is the solute. The molarity of the solution is 1.8 molar or 1.8 moles of potassium chloride per liter.

Substitute these values/variables into the formula.

[tex]1.8 \ mol \ KCl/ L = \frac { 0.14 \ mol \ KCl}{x}[/tex]

We are solving for x, so we must isolate the variable. First, cross multiply. Multiply the first numerator and second denominator, then the first denominator and second numerator.

[tex]\frac {1.8 \ mol \ KCl/L}{1} = \frac{0.14 \ mol \ KCl}{x}[/tex]

[tex]1.8 \ mol \ KCl/ L *x = 1*0.14 \ mol \ KCl[/tex]

[tex]1.8 \ mol \ KCl/ L *x = 0.14 \ mol \ KCl[/tex]

Now x is being multiplied by 1.8 moles of potassium chloride per liter. The inverse operation of multiplication is division, so we divide both sides by 1.8 mol KCl/L.

[tex]\frac {1.8 \ mol \ KCl/ L *x}{1.8 \ mol \ KCl/L} = \frac{0.14 \ mol \ KCl}{1.8 \ mol \ KCl/L}[/tex]

[tex]x= \frac{0.14 \ mol \ KCl}{1.8 \ mol \ KCl/L}[/tex]

The units of moles of potassium chloride cancel.

[tex]x= \frac{0.14 }{1.8 L}[/tex]

[tex]x=0.07777777778 \ L[/tex]

The original measurements of moles and molarity have 2 significant figures, so our answer must have the same. For the number we found, that is the thousandth place. The 7 in the ten-thousandth place tells us to round the 7 up to a 8.

[tex]x \approx 0.078 \ L[/tex]

There are approximately 0.078 liters of solution.