Answer:
1) 1,157*10⁻⁵ day; 2) 604800 sec.; 3) 0.5 m.
Explanation:
1) 1 second into one day:
one day consists of 24 hours, it means 24*3600=86400 seconds. Then 1 second is 1/86400 day or 1,157*10⁻⁵ day.
2) 1 week into seconds:
1 day consists of 3600*24=86400 seconds, then the week is 7*86400=604800 seconds.
3) 50 cm into meter:
100 cm is one meter, then 50 cm is 0.5 meter.
PS. note, there is not the only way to perform conversion.
Please help me. I need this in a few hours.
Answer:
A) The population of prey is greater than that of predator
A glass rod acquires charge by rubbing silk cloth. The charge on the glass is due to:
(a) Friction
(b) Conduction
(c) Induction
(d) Radiation
Answer:
(a)Friction
Explanation:
It is due to friction as you are rubbing the glass rod with silk cloth
as friction occurs when 2 surfaces are rubbed against each other
Therefore it is charging by friction
.............................
A body makes a displacement of 4 m due East from a point O and then makes displacement of 3 m due North. Its resultant displacement from O
Answer:
Answer5 mExplanation:when u draw this on paper u will find that it is forming a right angle
triangle. therefore, using Pythagoras
theoremdisplacement
Convert 60 kg to mg using the method of dimensional analysis
600,000
PLEASE MARK AS BRAINLIEST ANSWER
How many inches are in 300 meters? Using the method of dimensional analysis
what does a resistor in an electrical dp
Answer:
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.
Explanation:
Resistors are common elements of electrical networks and electronic circuits and are ubiquitous in electronic equipment. Practical resistors as discrete components can be composed of various compounds and forms. Resistors are also implemented within integrated circuits.
The electrical function of a resistor is specified by its resistance: common commercial resistors are manufactured over a range of more than nine orders of magnitude. The nominal value of the resistance falls within the manufacturing tolerance, indicated on the component.
A liquid of density 1200kg/m³ is filled in a beaker upto the depth of 50 cm. calculate the pressure at bottom of the breaker.(g=9.8m/s²)
[tex]\boxed{\sf Pressure=pgh}[/tex]
[tex]\\ \qquad\quad\sf{:}\dashrightarrow Pressure=1200(0.5)(9.8)[/tex]
[tex]\\ \qquad\quad\sf{:}\dashrightarrow Pressure=600(9.8)[/tex]
[tex]\\ \qquad\quad\sf{:}\dashrightarrow Pressure=5880Pa[/tex]
Calculate the force of gravitation between two objects of masses 50 kg and 120 kg respectively, kept at a distance of 10 m from one another.
Answer:
Answer
F=G×
d
2
m×M
m = 50 kg
M = 120 kg
Distance, d = 10 m
G=6.7×10
−11
Nm
2
/kg
2
F=6.67×10
−11
×
10
2
50×120
F=6.67×60×10
−11
F=4.02×10
9
N
Answer:
=4.002×10-⁷
Explanation:
(6.67×10-¹¹ ×50×120)/10²
=4.002×10-⁷
numerical filing method is more scientific why give me 4 reason
Answer:
Numerical Methods are mathematical way to solve certain problems.Whether the equations are linear or nonlinear, efficient and robust numerical methods are required to solve the system of algebraic equations.
Analytical solutions are exact solutions based on mathematical principles.
However, the governing partial differential equations of fluid flow are complex and cannot be solved by analytical means. The partial differential equations are therefore converted into a system of algebraic equations that are subsequently solved through numerical methods to provide approximate solutions to the governing equations.
Although we rarely reach on exact answer , we can get really close to the exact answer much quicker than solve analytically.
Answer:
oh my god
Explanation:
how long answer is this
how many significant figures 216 m
Answer:
Three
Explanation:
I hope this helps:)
Bagaimanakah pelembapan bagi suatu sistem ayunan dapat diatasi dengan resonans?
Answer:
Those reaction in which one element replaces another element form its place is called Single displacement reaction
difference Between Newton's first law and third law of motion
Newton first law state that anything in motion or rest will remain in motion or in rest until an external force is applied
Newton third law of motion state that every action have equal and opposite reaction
Answer:
Newton's laws of motion relate an object's motion to the forces acting on it. In the first law, an object will not change its motion unless a force acts on it. ... In the third law, when two objects interact, they apply forces to each other of equal magnitude and opposite direction.
Explanation:
mark me brain list please
What distance will be traveled if you are going 0.120m/s for 30 min
Answer:
216
you have to change the meters per second to meters per minute, so you multiply .12 by 60 and get 7.2, then you multiply 7.2 meters per minute by 30 minutes and get 216
Calculate the magnitude and direction of the current in this circuit.
Please help, I’ll like
Answer:
0.75 A ig.Hope it helps:))
The tin can with water in its bottom is heated to boil water and the steam is allowed to escape for some time. The open mouth is sealed with an air-tight cap and cooled under tap water. The tin can get crushed, why?
Explanation:
Water does expand with heat (and contract with cooling), but the amount of expansion is pretty small. So when you boil a can filled with water and seal it, the water will contract slightly as it cools. The can may kink slightly, but that will be it. Actually, most likely the only things you will be able to see is then top and bottom will be sucked in and go concave. Just like a commercial can of beans.
Now if you have a can with a little water and a big air space, things are completely different.
As the water boils, water vapour is given off. Steam. Let it boils for a minute just to make sure (nearly) all the air is expelled and the can is filled with steam.
Now when you put the lid on and cool the can, that steam condenses back to water, and goes from filling the can to a few drops of water. The can is now filled (if that is the right word) with a near vacuum, The air pressure, 15 lbs/square inch, will be pressing on every surface of the can, with nothing inside the can to resist it.
The can will crumple before your eyes.
Solve the following numerical problems. a) A load of 400N is lifted up by an effort of 100N. If load distance is 20cm, what will be the effort distance? (Ans: 80cm) b) Two boys, Shrijan having weight 600N and Shrijesh having weight 300N are playing see-saw. If Shrijan is sitting at 2m from fulcrum, where should Shrijesh sit from fulcrum to balance Shrijan?(Ans: 4m) c) A lever of length 1m has been used ttoko lift a load of 600N by applying an effort of 200N. If load is at 20cm from fulcrum, calculate mechanical advantage, velocity ratio and efficiency. (Ans: MA = 3, VR = 4, n=75%) d) Study the figure below and find the value of effort. (Ans: 120N) Muyn) 2.5m 600N 0.5m ? Science and Enyin
Answer:
given,
load = 400 N
effort = 100 N
load distance = 20 cm
we know that ,
E*Ed = L*Ld
=100 N* Ed = 400N * 20 cm
=100N * Ed = 8000N/cm
= Ed =( 8000N/cm ) / 100N
= Ed = 80 cm
b. soln.
given,
load = 600 N
load distance = 2 m
effort = 300 N
effort distance = ?
we know that ,
= E *Ed = L * Ld
= 300N * Ed = 600N * 2 m
= 300N * Ed = 1200N/m
=Ed =( 1200N/m ) / 300 N
= Ed = 4 m
C. soln.
given,
load = 600 N
load distance =20 cm
effort = 200 N
effort distance = ?
M.A = ?
V.R = ?
Efficiency = ?
we know that ,
= E *Ed = L *Ld
= 200N * Ed = 600 N * 20 cm
=200 N *Ed = 12000 N/cm
=Ed = ( 12000 N/cm) / 200 N
= Ed = 60 cm
Also,
M.A = load / effort
=600 N / 200 N
= 3
V.R = Ed/ Ld
= 60 cm / 20 cm
= 4
efficiency = ( M.A / V.R ) 100 %
= ( 3 / 4 ) 100%
= 75 %
d. soln.
given,
load = 600 N
load distance = 0.5 m
effort distance = 2.5 m
effort = ?
we know that ,
= E * Ed = L * Ld
= E * 2.5 m = 600 N * 0.5 m
= E * 2.5 m = 300 N / m
= E = ( 300 N / m ) / 2.5 m
= E = 120 N
Non-ideal behavior for a gas is most likely to be observed under conditions of a) high pressure and low temperature. b) high temperature and high pressure. c) high temperature and low pressure. d) standard temperature and pressure. e) low temperature and low pressure.
Answer:
high temperature and low pressure
Explanation:
Real gases have intermolecular forces of attraction between them hence they can be liquified. However, gases approach ideal behavior at high temperature and low pressure.
According to the kinetic theory of gases, gases molecules move at incredibly high speeds and exhibit no intermolecular interaction because the gas molecules are isolated from each other.
At high temperature and low pressure, gas molecules are found to possess maximum kinetic energy. They move with a very high velocity and have minimal intermolecular interaction between them in accordance with the proposition of the kinetic theory of gases.
Trên một đoạn đường thẳng AC cho điểm B nằm giữa AC sao cho BC = 4AB . Tại thời điểm t = 0 xe thứ nhất chuyển động đều qua A với tốc độ v1 hướng về C, xe thứ hai chuyển động đều qua B với tốc độ v2 cùng hướng với xe thứ nhất. Đến thời điểm t = 1.5h hai xe gặp nhau tại C. Biết rằng quảng đường mỗi xe đi dược trong một giờ hơn kém nhau 10km. Tính v1, v2 và khoảng cách từ A đến C.
Answer:
wuuwue eueueueuueueuueueueueueueueueeieueieieieieieueiueeuueueuueueuueueurururyyr it yttururururururururururururuur it ueue it ueuueeueueueueueeieueuueueeueiueue
a car is stationary at first.it moves off with.acceleration of 2m.s-2.Calculate how far it will move in 10s
Answer:
100 m.
Explanation:
At first the car was stationary, so its inicial velocity is zero. Considering its inicial position 0 m and using the Equation of motion for the position:
X(t) = Xo + vo.t +a[tex]t^{2}[/tex]/2 , vo=0, Xo=0, a=2m/[tex]s^{2}[/tex]
X(10) = (2 x [tex]10^{2}[/tex])/2 = 100 m.
A high voltage probe should always be used whenever you measure voltages near or above
A. 100 VAC or VDC
B. 500 VAC or VDC
C. 1000 VAC or VDC
D. 750 VAC or VDC
Answer:
C. 1000 VAC or VDC
Explanation:
step by step explanation
kaleidoscope works on the principal of
Answer:
Multiple reflections.Explanation:
Kaleidoscopes work on the principle of multiple reflections.
The mirrors reflect the images of objects inside, creating a symmetrical pattern.
When you look at your reflection in one mirror, you see light that has come from your face and bounced off the mirror.
please help urgent have you ever seen the old “Pull the tablecloth out from under the dishes” trick? Use Newton’s 1st Law to explain the following:
a. In this trick, are the dishes “objects in motion,” or “objects at rest?”
b. If the dishes end up staying on the table, was an UNBALANCED FORCE applied to them? How do you know?
Answer:
I kinda dont remember the 1st law so search it up on
and it should tell u , but if u need any help from the
A piece of gum becomes stuck upon a skateboard's wheel. What is the centripetal acceleration of the piece of gum if the wheel's radius is 30 mm and the tangential velocity is 0.5 m/s?
Answers:
a. 8.33 m/s^2
b. 0.5 m/s^2
c. 30 mm/s^2
d. 0.33 m/s^2
e. 83.20 m/ft^2
Answer:
a
Explanation:
a_c = v_t^2/r
a_c = (0.5)^2/0.03
a_c = 8.33 m/s^2
The deflection plates in an oscilloscope are 10 cm by 2 cm with a gap distance of 1 mm. A 100 volt potential difference is suddenly applied to the initially uncharged plates through a 1075 ohm resistor in series with the deflection plates. How long does it take for the potential difference between the deflection plates to reach 65 volts
Answer:
20 ns
Explanation:
Since the deflection plates are in series with the resistor, the deflection plates act as a capacitor.
So, the set-up is a series RC circuit.
The voltage across the deflection plates V =
[tex]V = V_{0}(1 - e^{-\frac{t}{RC} } )[/tex]
where V₀ = voltage applied = 100 V, R = resistance of resistor = 1075 Ω and C = capacitance of deflection plates and t = time to reach 65 V
The capacitance of the deflection plates C = ε₀A/d where ε₀ = permittivity of free space = 8.854 × 10⁻¹² F/m, A = area of deflection plates = 10 cm × 2 cm = 20 cm² = 20 × 10⁻⁴ m² and d = distance between deflection plates = 1 mm = 1 × 10⁻³ m.
So, C = ε₀A/d
C = 8.854 × 10⁻¹² F/m × 20 × 10⁻⁴ m²/1 × 10⁻³ m
C = 177.08 × 10⁻¹⁶ Fm/1 × 10⁻³ m
C = 177.08 × 10⁻¹³ F
C = 17.708 × 10⁻¹² F
Since we require the time it takes the capacitor to reach 65 Volts, V = 65 and we make t subject of the formula,
So, [tex]V = V_{0}(1 - e^{-\frac{t}{RC} } )[/tex]
[tex]\frac{V}{V_{0}} = (1 - e^{-\frac{t}{RC} } )\\e^{-\frac{t}{RC} } = 1 - \frac{V}{V_{0}}[/tex]
taking natural logarithm of both sides, we have
-t/RC = ㏑(1 - V/V₀)
t = -RC㏑(1 - V/V₀)
Substituting the values of the variables into the equation, we have
t = -RC㏑(1 - V/V₀)
t = -1075 Ω × 17.708 × 10⁻¹² F㏑(1 - 65 V/100 V)
t = -19036.1 × 10⁻¹² ΩF㏑(1 - 0.65)
t = -19036.1 × 10⁻¹² ΩF㏑(0.35)
t = -19036.1 × 10⁻¹² × -1.0498 s
t = 19984.5189 × 10⁻¹² s
t = 1.99845189 × 10⁻⁸ s
t = 19.99845189 × 10⁻⁹ s
t ≅ 20 × 10⁻⁹ s
t ≅ 20 ns
So, the time it takes the potential difference between the deflection plates to reach 65 V is 20 ns.
any person for the job he applied Force moment or torque
Answer:
i think torque is the answer not confirmed
Calculate the acceleration of a bus that speed up from 20ms-1 to 40ms-1 in 8 seconds?
Answer:
2.5 ms^-2
Explanation:
acceleration
= (final velocity - initial velocity)/time
= [(40m/s) - (20m/s)]/8s
= (20m/s)/8s
= 5/2 m/s²
= 2.5 m/s²
= 2.5 ms^-2
calculate the mass of material whose density is 0.798gcm and the mass of 25g
Answer:
Explanation:
Density = 0.798g/cm
Mass = 25g
The mass = 25/0.798
= 25/0.798
Mass = 31.6856780735 cm
= 31.69cm (Approx)
Please click thanks and mark brainliest if you like
what's is acceleration. ?????
Answer:
Acceleration, rate at which velocity changes with time, in terms of both speed and direction. A point or an object moving in a straight line is accelerated if it speeds up or slows down. ... Acceleration is defined as the change in the velocity vector in a time interval, divided by the time interval.
Answer:
The rate of change in velocity with time A=finall velocity _intial velocity upon time
define one standard kg
Answer:
The mass of platinum iridium rod whose diameter and height are equal an kept at international bureau of weight and measurement in Paris of France is called as one standard kg.
