Check how you understand the principles of working of lenses. In some optical setup consisting of a single lens and an object magnification factor is measured as m-+4. We can conclude that:__________ a. Lens is converging, image is at the opposite side of lens from the object b. Lens is converging, image is the same side of lens as object c. Lens is diverging, image is at the opposite side of lens from the object d. Lens is diverging, image is the same side of lens as object

Answer: ok, so there should be no speed at the 5th second but there was somehow it was the car fault

∞ω∞

Answer:

I think D??

Explanation:

Answer:

I = 0.25 [amp]

Explanation:

To solve this problem we must use ohm's law which tells us that the voltage is equal to the product of the current by the resistance.

V = I*R

where:

V = voltage [Volt]

I = amperage or current [amp]

R = resistance [ohm]

Since all resistors are connected in series, the total resistance will be equal to the arithmetic sum of all resistors.

Rt = 2 + 8 + 14

Rt = 24 [ohm]

Now clearing I for amperage

I = V/Rt

I = 6/24

I = 0.25 [amp]

Answer: 0.25

Explanation:

Answer:

1.5 x 10¹⁸hz

Explanation:

Given parameters:

Wavelength  = 2 x 10⁻¹⁰m

Unknown:

Frequency   = ?

Solution:

To find the frequency, use the expression below;

  V  = f x wavelength

V is the speed of light = 3 x 10⁸m/s

f is the frequency

Now;

 Insert the parameters

     3 x 10⁸  = 2 x 10⁻¹⁰ x frequency

   Wavelength = [tex]\frac{3 x 10^{8} }{2 x 10^{-10} }[/tex]    = 1.5 x 10¹⁸hz

Answer:

Globel warming

Explanation:

hope this helpex

Answer:

The magnitude of the large object's momentum change is 3 kilogram-meters per second.

Explanation:

Under the assumption that no external forces are exerted on both the small object and the big object, whose situation is described by the Principle of Momentum Conservation:

[tex]p_{S,1}+p_{B,1} = p_{S,2}+p_{B,2}[/tex] (1)

Where:

[tex]p_{S,1}[/tex], [tex]p_{S,2}[/tex] - Initial and final momemtums of the small object, measured in kilogram-meters per second.

[tex]p_{B,1}[/tex], [tex]p_{B,2}[/tex] - Initial and final momentums of the big object, measured in kilogram-meters per second.

If we know that [tex]p_{S,1} = 7\,\frac{kg\cdot m}{s}[/tex], [tex]p_{B,1} = 0\,\frac{kg\cdot m}{s}[/tex] and [tex]p_{S, 2} = 4\,\frac{kg\cdot m}{s}[/tex], then the final momentum of the big object is:

[tex]7\,\frac{kg\cdot m}{s} + 0\,\frac{kg\cdot m}{s} = 4\,\frac{kg\cdot m}{s}+p_{B,2}[/tex]

[tex]p_{B,2} = 3\,\frac{kg\cdot m}{s}[/tex]

The magnitude of the large object's momentum change is:

[tex]p_{B,2}-p_{B,1} = 3\,\frac{kg\cdot m}{s}-0\,\frac{kg\cdot m}{s}[/tex]

[tex]p_{B,2}-p_{B,1} = 3\,\frac{kg\cdot m}{s}[/tex]

The magnitude of the large object's momentum change is 3 kilogram-meters per second.

Answer:

m=146.277kg which is rounded to 146kg

Explanation:

Remember that F=ma

But F represents not 250N, but 250cos(35)N since the force is being pulled above the horizontal.

So 250cos(35)=204.7880111 approximately, and since a=1.4m/s^2, we have 204.7880111=m(1.4m/s^2). Then we divide both sides by the acceleration to get the mass. So m=146.2771508kg which the nearest number is 146kg

Mass is always in kg, unless stated otherwise.

Answer:

146kg

Explanation:

right on edge

Answer:

23 m/s downward

__________________________________________________________

Taking the downward direction as positive

We are given:

Initial velocity of the marble (u) = 0 m/s

Time interval (t) = 2.3 seconds

Final velocity (v) = x m/s

Solving for the Final velocity:

Acceleration of the Marble:

We know that gravity will make the marble accelerate at a constant acceleration of 10 m/s

Final velocity:

v = u + at                                              [First equation of motion]

x = 0 + (10)(2.3)                                    [replacing the given values]

x = 23 m/s

Hence, after 2.3 seconds, the marble will move at a velocity of 23 m/s in the downward direction

Answer: A

Explanation:

Answer:

The answer is A. It detects any current in the wire.

Explanation:

I took the quiz.

Answer:

According to the scientific theory of atoms, which of the following statements best describes the location of electrons? answer choices. in the nucleus of the atom.

Explanation:

Answer: D

Explanation: trust me

Answer:

It curves inward

Explanation:

Of the choices given it is the only one that makes sense

Considering the concave mirror to be a part of a large sphere and the outer surface polished, we can say it curves inward.

There are three types of mirrors: plain mirrors, convex mirrors, and concave mirrors.

The plain mirrors are the ones which we use in our houses. It has both the sides flat, front and back. With the back end polished to reflect light.

It is obvious that the back end of the mirror must be silvered or polished in order to reflect light.

In the case of concave mirrors, if we consider it a part of a large sphere, then the outer surface is silvered or polished and the inner surface is the surface that is used as a mirror,

So, we can say that a concave mirror curves inward.

Learn more about concave mirrors:

https://brainly.com/question/3359672?referrer=searchResults

Answer:

The pressure at the top of the step is 129.303 kilopascals.

Explanation:

From Hydrostatics we find that the pressure difference between extremes of the water column is defined by the following formula, which is a particular case of the Bernoulli's Principle ([tex]v_{bottom}\approx v_{top}[/tex]):

[tex]p_{bottom}-p_{top} = \rho\cdot g\cdot \Delta h[/tex] (1)

[tex]p_{bottom}[/tex], [tex]p_{top}[/tex] - Total pressures at the bottom and at the top, measured in pascals.

[tex]\rho[/tex] - Density of the water, measured in kilograms per cubic meter.

[tex]\Delta h[/tex] - Height difference of the step, measured in meters.

If we know that [tex]p_{bottom} = 132000\,Pa[/tex], [tex]\rho = 1000\,\frac{kg}{m^{3}}[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] and [tex]\Delta h = 0.275\,m[/tex], then the pressure at the top of the step is:

[tex]p_{top} = p_{bottom}-\rho\cdot g\cdot \Delta h[/tex]

[tex]p_{top} = 132000\,Pa-\left(1000\,\frac{kg}{m^{3}} \right)\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (0.275\,m)[/tex]

[tex]p_{top} = 129303.075\,Pa[/tex]

[tex]p_{top} = 129.303\,kPa[/tex]

The pressure at the top of the step is 129.303 kilopascals.

The pressure of the water at the top of the step is 1.293 x 10⁵ Pa.

The given parameters:

The pressure of the water at the top of the step is calculated as follows;

[tex]P_b - P_t = \rho gh\\\\P_t = P_b - \rho gh[/tex]

where;

[tex]\rho[/tex] is the density of the water

[tex]P_t = (132,000 \ Pa) \ - \ (1000 \times 9.8 \times 0.275)\\\\P_t = 1.293 \times 10^5 \ Pa[/tex]

Thus, the pressure of the water at the top of the step is 1.293 x 10⁵ Pa.

Learn more about pressure of water here: https://brainly.com/question/24827501

Answer:

a rubber band

Explanation:

hope this helps!

Answer:

a rubber band

Explanation:

thank you

Answer:

It was probably formed by when the particles were pressed together.

Explanation:

Answer:

Formed by particles pressed against each other

Explanation:

Answer: 10595 J

Explanation: cK-12 Potential Energy

The gravitational potential energy gained by Sara if she has a mass of 60 kg and the distance of the journey is 18 meters is 10584 Joules.

The potential energy that a huge item has in relation to another massive object due to gravity is known as gravitational energy or gravitational potential energy. When two objects descend toward one another, the potential energy associated with the gravitational field is released (transformed into kinetic energy). Bringing two things farther apart increases the gravitational potential energy.

Given:

The distance of the journey, d = 18 meters,

The mass of Sara, m = 60 kg,

Calculate the potential energy by the following formula,

PE = m × g × d

Here, PE is the potential energy and g is gravitational acceleration,

Substitute the values,

PE = 60 × 18 × 9.8

PE = 10584 Joules

Therefore, the gravitational potential energy gained by Sara if she has a mass of 60 kg and the distance of the journey is 18 meters is 10584 joules.

To know more about gravitational potential energy:

https://brainly.com/question/19768887

#SPJ6

Answer:

Violet light has a wavelength of ~400 nm, and a frequency of ~7.5*1014 Hz.

Explanation:

Three elements are required to create an electric current: a supply of freely flowing electric charges (electrons), some kind of push to move the charges across the circuit, and a path to carry the charges.

Electrical energy is a type of energy that is related to forces on electrically charged particles and electrically charged particle motion (often electrons in wires, but not always). Electric current and electric potential, which is also known as voltage because it is measured in volts, are delivered via an electrical circuit to provide this energy.

When charged particles and a voltage difference combine, as in static electricity or a charged capacitor, motion (current) is not necessary. Instead, the moving electrical energy is often transformed into another kind of energy.

To know more about electrical energy :

https://brainly.com/question/16182853

#SPJ2

Answer: 17.3rad/secs.

Explanation:

Given data:

m = 2.0kg

f = 45N

radius of the disk = 1.5m

Solution:

First we determine the kinetic energy of the the system

= 1/2jw^2 + 1/2m(wR)^2

when the brick falls at wR m/s

= 1/2( j + mR^2)w^2

= 1/2 (1/2MR^2 + mR^2)w^2

Loss in potential energy when the brick drops

= 5rad * 1.5m

= 7.5m

Therefore;

45N * 7.5m = 1/2Iw^2

where;

I = 1/2mr^2

angular speed

w = √4*45*7.5/(2*1.5^2)

= 17.3rad/secs

Answer:

It can apply a greater output force over a greater distance compared to the input force and distance.

Explanation:

A machine helps to multiply force input and makes it easier to do work. Simple and complex machines are need to make work easier.

Answer:

C. It can apply a greater output force over a greater distance compared to the input force and distance.

Explanation:

Answer:

What??? maybe not keep doing what you are doing.

Explanation:

I don't know

Answer:

a)   I = 3.63 W / m² , b)   I = 0.750 W / m²

Explanation:

The intensity of a sound wave is given by the relation

         I = P / A = ½ ρ v (2π f [tex]s_{max}[/tex])²

         I = (½ ρ v 4π² s_{max}²) f²

a) with the initial condition let's call the intensity Io

        cte = (½ ρ v 4π² s_{max}²)

         I₀ = cte s² f₀²

        I₀ = cte 10 6

If frequency is increase f = 2.20 10³ Hz

         I = constant (2.20 10³) 2

         I = cte 4.84 10⁶

let's find the relationship of the two quantities

        I / Io = 4.84

        I = 4.84 Io

        I = 4.84 0.750

        I = 3.63 W / m²

b) in this case the frequency is reduced to f = 0.250 10³ Hz and the displacement s = 4 s or

        I = cte (f s)²

        I = constant (0.250 10³ 4)²

        I = cte 1 10⁶

the relationship

        I / Io = 1

        I = Io

        I = 0.750 W / m²

Answer:

true

Explanation:

Answer:

answer is B (CROWN ME)

Explanation:

One should revise his/ her research questions very well in the week before the exam. They should contribute at least 15-20 hours for going through these questions in that particular week. They must put some extra efforts on weekends.

A freely falling object near the Earth's surface has a constant: B. acceleration of 9.8 [tex]m/s^2[/tex].

Gravity can be defined as a force that controls the movement of the planets such as Earth around the Sun, hold stars grouped in galaxies together, and galaxies grouped in clusters.  This ultimately implies that, gravity is a universal force of attraction that acts between all objects that are having both mass and energy, and can occupy space.

Furthermore, the gravity near the Earth's surface makes it possible for all physical objects to possess weight and experience a free fall.

Generally, the acceleration due to gravity for an object experiencing a free fall near the Earth's surface is 9.8 [tex]m/s^2[/tex].

Read more here: https://brainly.com/question/4006819

Answer:

A

Explanation:

I got it right with that :>

Answer:

Conditions for Superconductivity

The material must be cooled below a characteristic temperature, known as its superconducting transition or critical temperature (Tc). ... The magnetic field to which the material is exposed must be below a characteristic value known as the critical magnetic field (Hc).

Answer:

F = 35651 [N]

Explanation:

To solve this problem we must use the following equation of kinematics

[tex]v_{f} ^{2} =v_{o} ^{2} +2*a*x[/tex]

where:

Vf = final velocity = 185 [m/s]

Vo = initial velocity = 0 (starts from the rest)

a = acceleration [m/s²]

x = distance = 3.6 [m]

Now we can find the acceleration.

185² = 0 + 2*a*3.6

34225 = 7.2*a

a = 4753.47 [m/s²]

Now we must use Newton's second law which tells us that the total force on a body is equal to the product of mass by acceleration.

F = m*a

where:

m = mass = 7.5 [kg]

F = force [N] (units of Newtons)

F = 7.5*4753.47

F = 35651 [N]

Answer:

the rock breaks down when the wind blows particles of sand against it.

Explanation:

because the sand can easily be decomposed and temperature easily accessible to it cause line of weaknesses of the rock to break down