A virtual watershed is a computer model that simulates water flow. In California virtual watersheds, water can travel different distances depending on factors like topography.
A virtual watershed is a computer-generated model that simulates the flow of water in a specific geographic area. It helps scientists and policymakers understand how water moves through the landscape, and it can be used to study the effects of different factors like rainfall, land use, and infrastructure on water availability. In California virtual watersheds, the distance water travels can vary greatly.
For example, in areas with steep topography, water may flow quickly through the watershed, traveling a shorter distance. In flatter areas, water may flow more slowly and travel a longer distance before reaching its destination. Additionally, factors like evaporation and human water use can also influence the distance water travels in virtual watersheds. Therefore, the exact distance water travels in California virtual watersheds can vary greatly depending on the specific characteristics of the virtual watershed.
Learn more about topography here:
https://brainly.com/question/31601333
#SPJ11
For each of these kinds of volcanic rocks, where are they
typically found: ultramafic rocks, mafic rocks, intermediate rocks,
and felsic rocks?
Ultramafic rocks are found in the mantle and ophiolite complexes. Mafic rocks are in oceanic crust, like basalt. Intermediate rocks occur in subduction zones, and felsic rocks are in continental crust, like granite.
Ultramafic rocks, characterized by high amounts of magnesium and iron, are typically found in the Earth's mantle and in ophiolite complexes. Ophiolites are sections of oceanic crust that have been uplifted and exposed on land due to tectonic processes. These rocks are rarely found at the surface.
Mafic rocks, which have lower magnesium and iron content than ultramafic rocks, are commonly found in oceanic crust. Basaltic lava flows and gabbroic intrusions are examples of mafic rocks. They can also be found in volcanic islands and hotspot volcanoes, such as the Hawaiian Islands.
Intermediate rocks, with compositions between mafic and felsic, are often found in subduction zones. These are areas where one tectonic plate is forced beneath another. Examples of intermediate rocks include andesite lava flows and dioritic intrusions.
Felsic rocks, which have high amounts of silica, are typically found in continental crust. Granite plutons and rhyolitic volcanic eruptions are examples of felsic rocks. They can also be found in the cores of some mountain ranges.
The location of these volcanic rocks is influenced by the chemical composition of the magma, which is determined by the source material and the tectonic setting.
Learn more about ultramafic rocks here:
https://brainly.com/question/33539048
#SPJ11
the main ingredient in most shampoos is _____ water.
The main ingredient in most shampoos is water. It is an essential component that makes up the bulk of the product and enables it to clean hair. Shampoos are composed of a combination of water, detergents, fragrances, preservatives, and other ingredients.
Water helps to dilute the other ingredients, enabling them to penetrate the hair and remove dirt, oil, and product buildup. Shampoo is designed to remove unwanted substances from the scalp and hair without stripping them of their natural oils completely. The primary purpose of a shampoo is to clean the hair and scalp and remove oil and dirt, leaving the hair looking clean, soft, and healthy.
The composition of a shampoo can vary based on the manufacturer's formulation. Some shampoos include ingredients such as conditioning agents, vitamins, proteins, and minerals that are intended to improve the health and appearance of the hair. In summary, the primary ingredient in most shampoos is water, which is used to dilute and distribute the other components and provide a medium for cleaning the hair and scalp.
To know more about shampoos visit:
https://brainly.com/question/31621462
#SPJ11
The principal ingredient in most shampoos is water, which acts as a solvent, dissolving and combining the other ingredients such as detergents and conditioners. This enables the shampoo to produce lather and clean the hair effectively.
Explanation:The main ingredient in most shampoos is indeed water. This ingredient is fundamental because it acts as a solvent, meaning it dissolves the other ingredients and allows them to interact. This results in the formation of a shampoo 's characteristic lather and cleaning properties. Without water, all other ingredients such as detergents, conditioners, thickeners, and fragrances wouldn't be able to form the necessary structure to clean and condition the hair effectively.
Learn more about Ingredients in Shampoo here:https://brainly.com/question/33537515
#SPJ6
How many arcminutes are in ° of latitude? How many nautical miles would that be? 6. You developed many skills in this lab. Identify one that you feel you are strong in and one where you feel you are weak. Then identify three strategies to improve where you felt you were weak.
In general, there are 60 arcminutes (') in 1 degree (°) of latitude. This means that if you divide a degree of latitude into smaller parts, each part would be equal to 1 arcminute.
Now, let's move on to nautical miles. A nautical mile is a unit of measurement used in navigation and is equal to one minute of latitude. Since there are 60 arcminutes in 1 degree of latitude, it means that there are also 60 nautical miles in 1 degree of latitude.
To summarize:
- There are 60 arcminutes in 1 degree of latitude.
- There are 60 nautical miles in 1 degree of latitude.
Moving on to the second part of your question, let's focus on the skills you developed in the lab. You mentioned identifying one skill you feel strong in and one where you feel weak. Here's an example response:
- Strong skill: I feel strong in data analysis. I am confident in my ability to collect and interpret data accurately. I can easily identify patterns and trends, and I enjoy working with numbers and statistics.
- Weak skill: I feel weak in presentation skills. I struggle with effectively communicating my findings and ideas to others. I find it challenging to create clear and engaging presentations that effectively convey the information I want to share.
Now, let's move on to the three strategies to improve your weak skill of presentation:
1. Practice regularly: One of the best ways to improve presentation skills is through practice. Set aside time to practice delivering presentations, whether it's in front of a mirror, to a small group of friends, or by recording yourself. This will help you become more comfortable and confident in presenting your ideas.
2. Seek feedback: Ask for feedback from trusted peers or mentors who can provide constructive criticism on your presentation skills. Their input can help you identify areas for improvement and provide guidance on how to enhance your presentation delivery.
3. Study effective presentations: Take the time to study and analyze presentations from skilled presenters. Observe their techniques, such as how they engage the audience, use visual aids, and structure their content. By learning from successful presenters, you can incorporate their strategies into your own presentations.
Remember, improving any skill takes time and effort. Be patient with yourself and keep practicing and seeking feedback to continuously enhance your presentation skills.
To know more about latitude, visit:
https://brainly.com/question/30459307
#SPJ11
The mid-latitude Westerlies: drive the circulation of the polar jet stream. move moist air from the equator to the drier tropical latitudes. drive the movement of hurricanes from coastal Africa into the Caribbean region. are trade winds that affect hurricane paths along the U.S. Atlantic coast. are tropical cyclones originating in the west Pacific.
The mid-latitude Westerlies are responsible for driving the circulation of the polar jet stream. The westerly wind belt that circulates the globe and influences weather conditions across the mid-latitudes is referred to as the Westerlies.
The winds are oriented in the west-to-east direction and typically occur between 30 and 60 degrees latitude. The Westerlies are the most powerful in the mid-latitudes, providing the necessary energy for the polar jet stream to circulate at the higher latitudes. The jet stream circulates cold air southward from the polar regions while separating it from the warmer air in the tropics.
The Westerlies play a crucial role in transferring air and moisture between latitudes, and they drive weather patterns across North America, Europe, and Asia. They transport warm, moist air from the equator northwards while cold air moves southwards. The moisture-laden air sheds moisture as it moves poleward, resulting in drier conditions in the subtropical regions. It also drives the movement of hurricanes from the West Coast of Africa into the Caribbean region. Thus, the mid-latitude Westerlies are responsible for driving the circulation of the polar jet stream and also aid in the movement of hurricanes across the globe.
To know more about Westerlies visit:
https://brainly.com/question/14975832
#SPJ11
A parcel of air at 5 km and an initial temperature of 10ºC descends to 3 km altitude at the dry adiabatic lapse rate. What is the temperature of the parcel at 3 km?
A) 0ºC
B) 30ºC
C) -30ºC
D) 60ºC
The parcel of air is descending from 5 km altitude to 3 km altitude at the dry adiabatic lapse rate. The dry adiabatic lapse rate is the rate at which the temperature of a parcel of air decreases as it rises or increases as it descends without exchanging heat with its surroundings.
The dry adiabatic lapse rate is approximately 10 degrees Celsius per kilometer. Therefore, for every kilometer the parcel descends, the temperature will increase by 10 degrees Celsius.
In this case, the parcel is descending 2 kilometers (from 5 km to 3 km). So, the temperature of the parcel at 3 km will increase by 20 degrees Celsius.
Given that the initial temperature of the parcel is 10 degrees Celsius, we can calculate the final temperature at 3 km by adding the increase of 20 degrees Celsius to the initial temperature.
10 degrees Celsius (initial temperature) + 20 degrees Celsius (increase) = 30 degrees Celsius.
Therefore, the temperature of the parcel at 3 km altitude will be 30 degrees Celsius.
The correct answer is B) 30ºC.
To know more about adiabatic , visit:
https://brainly.com/question/3962272
#SPJ11
Which of the following radioactive isotope systems would be useful for dating a rock that is nearly the age of the Earth?
Select an answer and submit. For keyboard navigation, use the up/down arrow keys to select an answer.
a Tritium to helium decay, 12.3 years
b Radiocarbon to nitrogen decay, 5700 years
c Berrylium to boron decay, 1.39 million years
d Uranium-led declay, 4.47 billion years
The radioactive isotope system that would be useful for dating a rock nearly the age of the Earth is uranium-lead decay. The correct answer is option d.
Uranium-lead decay is the most suitable radioactive isotope system for dating rocks that are nearly the age of the Earth. Uranium-238 decays into lead-206 with a half-life of 4.47 billion years. By measuring the ratio of uranium-238 to lead-206 in a rock, scientists can determine its age. This method is widely used in geochronology for dating rocks billions of years old.
Tritium to helium decay has a half-life of 12.3 years and is useful for dating very recent events, not rocks nearly the age of the Earth. Radiocarbon to nitrogen decay has a half-life of 5700 years, making it suitable for dating materials up to tens of thousands of years old, not billions of years. Beryllium to boron decay has a half-life of 1.39 million years, which is also not long enough for dating rocks nearly the age of the Earth.
The correct answer is option d: Uranium-led decay, 4.47 billion years
Learn more about geochronology here:
https://brainly.com/question/32777608
#SPJ11
. Many people identify trees as an important and useful carbon sink in our environment. Use your calculating skills to estimate how effective it would be if everyone in the world planted a tree tomorrow. a) Assume that each tree (regardless of its size) produces 9 kgO
2
per year through photosynthesis. Determine how long it would take these trees take to make a 1-ppm difference in the CO
2
concentration in the atmosphere? 3 pts) b) Discuss the results of your calculation to assess this as a practical climate solution. Consider the assumptions you made in your calculations, as well as any other radiative forcing effects that could occur as a result of planting this many trees. ( 2 pts)
a. It would take approximately 1 tree to make a 1-ppm difference in the CO2 concentration in the atmosphere.
b. The result of our calculation suggests that if everyone in the world planted a tree tomorrow, it would have a minimal impact on reducing the CO2 concentration in the atmosphere.
a) To estimate the effectiveness of everyone planting a tree in terms of reducing CO2 concentration, we need to calculate how long it would take for these trees to make a 1-ppm (parts per million) difference in the atmosphere.
Assuming each tree produces 9 kg of CO2 per year through photosynthesis, we can calculate the amount of CO2 reduction required to make a 1-ppm difference.
First, we need to determine the total mass of CO2 in the atmosphere. Currently, the atmospheric CO2 concentration is approximately 400 ppm. To calculate the total mass, we multiply the concentration by the mass of CO2 per ppm. Assuming the average molar mass of CO2 is 44 g/mol, we get:
400 ppm * (44 g/mol) = 17,600 g of CO2/m^3 of atmosphere.
To make a 1-ppm difference, we need to reduce the CO2 mass by: 1 ppm * (44 g/mol) = 44 g of CO2/m^3 of atmosphere.
Next, we divide this mass by the CO2 produced per tree per year to determine the number of trees required:
44 g of CO2 / (9 kg/tree/year * 1000 g/kg) = 0.00489 trees.
Since we cannot have a fraction of a tree, we round up to 1 tree.
b) The result of our calculation suggests that if everyone in the world planted a tree tomorrow, it would have a minimal impact on reducing the CO2 concentration in the atmosphere. While planting trees is beneficial for sequestering carbon, the assumption of each tree producing 9 kg of CO2 per year might be oversimplified. Factors such as tree species, age, and environmental conditions can affect the actual amount of CO2 absorbed.
Additionally, planting a large number of trees can have other radiative forcing effects. For example, increased vegetation can alter surface albedo, affecting the amount of sunlight reflected or absorbed, which in turn impacts the Earth's energy balance. Moreover, the availability of suitable land for planting trees on a global scale and the maintenance and care required for the planted trees also need to be considered.
In conclusion, while planting trees is an important part of climate solutions, it should be complemented by other sustainable practices, such as reducing greenhouse gas emissions and transitioning to renewable energy sources, to effectively address the issue of climate change.
To know more about surface albedo, visit:
https://brainly.com/question/1938552
#SPJ11
We can find artesian wells in unconfined aquifers True False Question 11 The water table shows seasonal fluctuations, it rises in dry months and falls in wet months. True False Question 12 The water table is the boundary between the saturated zone (layer where pore spaces are fully filled with water) and the unsaturated zone (layer where pore spaces are empty or partially filled with water). True False What is the percentage of Americans that rely on groundwater for their water supply? About 10% About 20% About 40% About 80% Question 14 Water is uniquely vulnerăble to pollution, because it is hence its ability to dissolve more substances than any other liquid on earth. a solvent soluble sticky a transient Which type of pollution is the leading type in surface water bodies in the U.S.? Nutrient pollution, including nitrates and phosphates originating mostly from agriculture. Heavy metal pollution, including lead and mercury originating mostly from industrial facilities. Oil spills from boats and pipelines Toxic chemicals, incleling solvents and soaps originating mostly from households. Question 16 Most pollution in oceans is transported by rivers from land to oceans. True False
Artesian wells can be found in confined aquifers. True. Artesian wells can only be found in confined aquifers. The water table displays seasonal variations; it increases in dry months and decreases in wet months. False.
The water table exhibits seasonal fluctuations, rising in wet months and dropping in dry months. The water table is the interface between the saturated and unsaturated zones. True. The water table is the boundary that divides the saturated zone (a layer where pore spaces are fully filled with water) from the unsaturated zone (a layer where pore spaces are empty or partially filled with water).Approximately 40% of Americans rely on groundwater for their drinking water. True. Approximately 40% of Americans depend on groundwater for their drinking water. Pollution from nutrients, such as nitrates and phosphates, mostly from agriculture, is the most common form of pollution in surface water bodies in the United States. True.
Pollution from nutrients, including nitrates and phosphates, is the leading type of pollution in surface water bodies in the United States. The majority of pollution in oceans is transported by rivers from land to oceans. True. The majority of pollution in oceans is transported by rivers from land to oceans. Water is uniquely susceptible to pollution because it is a solvent, allowing it to dissolve more substances than any other substance on earth. True. Water is uniquely susceptible to contamination because it is a solvent, enabling it to dissolve more substances than any other liquid on earth.
Artesian wells can only be found in confined aquifers. The water table exhibits seasonal fluctuations, rising in wet months and dropping in dry months. True. The water table is the boundary that divides the saturated zone (a layer where pore spaces are fully filled with water) from the unsaturated zone (a layer where pore spaces are empty or partially filled with water).Approximately 40% of Americans depend on groundwater for their drinking water. True. Pollution from nutrients, including nitrates and phosphates, is the leading type of pollution in surface water bodies in the United States. True. The majority of pollution in oceans is transported by rivers from land to oceans. True. Water is uniquely susceptible to contamination because it is a solvent, allowing it to dissolve more substances than any other substance on earth.
To know more about Artesian wells visit:
https://brainly.com/question/31566107
#SPJ11
How does a polymorph of calcite form by organic origins?
The formation of a polymorph of calcite through organic origins can occur in several ways. One example is the biomineralization process, which involves the deposition of calcium carbonate by living organisms.
1. Organic matrix secretion: In this process, organisms, such as mollusks, corals, and algae, secrete an organic matrix that serves as a template for the formation of calcite crystals. This matrix contains proteins, polysaccharides, and other biomolecules that regulate crystal growth and shape.
2. Nucleation: Nucleation is the initial step in the formation of calcite crystals. Within the organic matrix, calcium ions and carbonate ions are attracted to specific sites, promoting the formation of small calcite crystals. These nucleation sites are often influenced by the biomolecules present in the matrix.
3. Crystal growth: Once nucleation occurs, the calcite crystals grow by the continuous deposition of calcium carbonate onto their surfaces. The organic matrix plays a crucial role in regulating crystal growth, ensuring that the crystals adopt specific shapes and sizes. This regulation is achieved through the interaction between the biomolecules and the growing crystal surface.
4. Crystal organization: The arrangement and orientation of the calcite crystals within the organic matrix can vary, resulting in different polymorphs of calcite. The specific organization of the crystals is influenced by the type and distribution of biomolecules present in the organic matrix. These biomolecules can influence crystal orientation, alignment, and overall crystal morphology.
Overall, the formation of a polymorph of calcite through organic origins involves the secretion of an organic matrix, nucleation of calcite crystals within the matrix, growth of these crystals, and the organization of the crystals within the matrix. This process is influenced by the biomolecules present in the organic matrix, which regulate crystal growth and shape.
To know more about biomineralization process, visit:
https://brainly.com/question/17083646
#SPJ11
Which of the following best describes the habitable zone? Choose one:A. the top 3,000 meters of the ocean B. the distance from the Sun where temperatures range between 0∘C (freezing) to 100 ∘C(boiling) C. the distance from the Sun that has high levels of oxygen D. the area on Earth that lies below 5.5 kilometers in elevation
The distance from the Sun where temperatures range between 0∘C (freezing) to 100 ∘C(boiling) of the following best describes the habitable zone. The correct option is B.
The area surrounding a star where conditions are adequate for the existence of liquid water on the surface of a planet is known as the habitable zone, commonly referred to as the "Goldilocks zone" or "habitable belt."
In the case of Earth, this is the area surrounding the Sun where temperatures are within a range that permits water to exist in its liquid state, which is essentially between 0°C (the freezing point of water) and 100°C (the boiling point of water) at standard atmospheric pressure. It is believed that this temperature range is appropriate for the growth and maintenance of life as we know it.
Thus, the ideal selection is option B.
Learn more about habitable zone here:
https://brainly.com/question/32140846
#SPJ4
A Dangerous Ride. You and your exploration team are stuck on a steep slope in the Andes Mountains in Argentina. A dead y winter storm is approaching and you must get down the mountain before the storm hits. Your path leads you around an extremely slippery. horizontal curve with a diameter of 88.0 m and banked at an angle of 40.0
∘
relative to the horizontal. Youget the idea to unpack the toboggan that you bave been using to haul supplies, load your team upon it, and ride it down the mountain to get enough speed to get around the banked curve. You must be extremely careful, however, not to slide down the bank: at the bottom of the curve is a steep cliff. (a) Neglecting friction and air resistance, what must be the speed of your toboggan in order to get around the curve without sliding up or down its bank? Express your answer in m/s and m. ph. (b) You will need to climb up the mountain and ride the toboggan down in order to attain the speed you need to safely navigate the curve (from part (a)). The mountain slope leading into the curve is at an angle of 30.0
∘
relative to the horizontal, and the coefficient of kinetic friction between the toboggan and the surface of the slope is (μ
mountain
=0.17). How far up the mountain (distance along the slope, not elevation) from the curve should you start your ride? Note: the path down the mountain levels off at the bottom so that the toboggan enters the curve moving in the horizontal plane (i.e, in the same plane as the curve). (a) Number Units m/5 Number: Units m.ph. (b) Number Units
Given data:The diameter of the curve = 88.0 m
The angle of the curve = 40 degrees = 40°The coefficient of kinetic friction between the toboggan and the surface of the slope = 0.17
(a)To find:The speed of the toboggan in order to get around the curve without sliding up or down its bankConcepts used:Banked curveLet, v be the speed of the toboggan and R be the radius of the curve.As the banked curve is frictionless,The centripetal force required to overcome the gravitational force is provided by the normal force acting on the toboggan. Therefore,N = m * v² / RR = D / 2 = 88.0 / 2 = 44.0 mN = m * g = m * 9.8 m/s²∴ m * v² / R = m * g∴ v² / R = g∴ v = √(gR) = √(9.8 × 44.0) = 19.6 m/s
Therefore, the speed of the toboggan is 19.6 m/s. (b)To find:The distance along the slope from where you should start your ride.Concepts used:Work-energy theorem Let, h be the height at which the toboggan is started from rest, L be the distance along the slope to the start of the curve, and M be the mass of the toboggan and its team.The potential energy at the height h is M * g * h.The initial kinetic energy is zero. The final kinetic energy is M * v² / 2.The work done by the force of kinetic friction is -μ * M * g * L. (negative sign as the force of friction is opposite to the direction of motion)
By conservation of energy,M * g * h = M * v² / 2 - μ * M * g * L∴ L = (M * v² / (2 * μ * M * g)) + h∴ L = v² / (2 * μ * g) + hLet's substitute the given values,v = 19.6 m/sμ = 0.17g = 9.8 m/s²h = L * sin(30°) = L / 2L = (19.6² / (2 * 0.17 * 9.8)) + (L / 2 * 2)∴ L = 483.3 mTherefore, the distance along the slope from where you should start your ride is 483.3 m.
To know more about Curve visit
https://brainly.com/question/33524029
#SPJ11
Review the concept of seafloor spreading with these videos: Seafloor Spreading and Plate Boundaries (Links to an external site.) Divergent Boundary (Links to an external site.) 2. Perform the following calculations and answer the associated questions. Given: a) Africa and North America are moving away from each other at a velocity (rate) of 3 cm/year. b) Africa and North America are presently 6000 km apart. Required Information: Velocity = distance/time 1 km = 1000 m and 1 m = 100 cm, therefore 1 km = 100,000 cm Calculate (show all work): How long has it been since Africa and North America were adjacent to each other? How far apart have Africa and North America moved since you were born? What assumption did you make in order to complete these calculations? Why did you make this assumption?
The assumption made here is that the rate of 3 cm/year has been constant over the entire time period being considered. This is an assumption because seafloor spreading rates can vary over time due to a variety of factors, such as changes in mantle convection currents, changes in plate boundary configurations, and variations in volcanic activity along mid-ocean ridges.
The concept of seafloor spreading is related to the creation of new oceanic lithosphere at the mid-oceanic ridges due to the spreading of the seafloor apart. In this process, new rock is created by volcanic activity at the mid-ocean ridges, and the older rock moves away from the ridge and toward the edges of the continents, forming trenches.
The process is driven by convection currents in the mantle below the lithosphere.
Performing the given calculations and answering the associated questions:
Given: a) Africa and North America are moving away from each other at a velocity (rate) of 3 cm/year.
b) Africa and North America are presently 6000 km apart.
Required Information:
Velocity = distance/time
1 km = 1000 m and 1 m = 100 cm, therefore 1 km = 100,000 cm.
The calculation to determine how long it has been since Africa and North America were adjacent to each other is as follows:
Distance = Rate × Time
Rearranging this formula, we get:
Time = Distance/Rate
Time = (6000 km) × (1000 m/km) × (100 cm/m) / (3 cm/year)Time = 2 × 10^11 cm / 3 cm/year
Time = 6.67 × 10^9 years
The calculation to determine how far apart have Africa and North America moved since you were born is as follows:
Distance = Rate × Time
Distance = (3 cm/year) × (number of years since birth)
To know more about convection currents visit:
https://brainly.com/question/29763773
#SPJ11
Explain in what environments the sedimentary hydrocarbon
reservoir rocks can be formed.
Sedimentary hydrocarbon reservoir rocks are formed in specific environments where the conditions are favorable for the accumulation and preservation of organic material.
Here are some examples of environments where sedimentary hydrocarbon reservoir rocks can be formed:
1. Marine Environments: In marine environments such as oceans and seas, sedimentary hydrocarbon reservoir rocks can be formed. The accumulation of organic material from marine organisms such as plankton, algae, and other marine plants and animals is a key factor in the formation of these rocks. Over time, the organic material gets buried under layers of sediment and undergoes compaction and diagenesis, resulting in the formation of reservoir rocks like sandstones and limestones.
2. Lacustrine Environments: Lacustrine environments, which include lakes and freshwater bodies, can also be conducive to the formation of sedimentary hydrocarbon reservoir rocks.
In these environments, organic material from aquatic plants and animals can accumulate and become buried under sediment. As with marine environments, the organic material undergoes burial, compaction, and diagenesis, leading to the formation of reservoir rocks.
3. Deltaic Environments: Deltaic environments, where rivers meet the sea or a lake, can provide favorable conditions for the formation of sedimentary hydrocarbon reservoir rocks. Deltas are known for their high sedimentation rates, which can result in the deposition and burial of large amounts of organic material. This organic material can then undergo diagenesis and transformation into hydrocarbon-rich reservoir rocks.
4. Terrestrial Environments: In addition to aquatic environments, sedimentary hydrocarbon reservoir rocks can also form in terrestrial environments. This includes areas such as swamps, marshes, and peatlands, where organic material from plants can accumulate and be preserved. Over time, the organic material can be buried and undergo compaction, leading to the formation of reservoir rocks.
It's important to note that the formation of sedimentary hydrocarbon reservoir rocks is a complex process that involves various factors such as sedimentation rates, organic material availability, burial depth, and diagenesis.
The specific combination of these factors in different environments contributes to the formation of different types of reservoir rocks.
To know more about Sedimentary hydrocarbon, visit:
https://brainly.com/question/31643106
#SPJ11
Please choose one specific type of disaster and discuss why this type would be considered a disaster, what is the typical cause of the disaster, and what are the typical short-term and long-term consequences of this disaster.
Disasters are significant setbacks to a community's ability to operate that goes beyond what it can handle on its own. Natural, man-made, and technical risks, as well as a number of other variables that affect a community's exposure and vulnerability, can all result in disasters.
Hazards of all types, including those listed below, can result in disasters, which can have catastrophic effects on individuals as well as entire communities.
Future events including climate change, population relocation, armed conflict, fast and unplanned urbanization, technology risks, and public health catastrophes are all expected to result in an increase in the frequency, complexity, and intensity of their effects.
Disasters, however, may and ought to be avoided. By assisting communities in being prepared, lowering their risks, and becoming more resilient, we may avoid hazards from becoming disasters.
Learn more about disasters here:
https://brainly.com/question/32778845
#SPJ4
when will the first quarter moon rise, approximately?
The first quarter moon is the phase of the moon that occurs when half of the moon is visible from the earth's surface. This occurs about seven days after the new moon and about a week before the full moon.
The first quarter moon rises approximately at noon, and it sets at midnight. There are a few things to keep in mind when considering the timing of the first quarter moon rise. Firstly, it's important to understand that the exact timing of the moonrise and moonset varies depending on where you are in the world. In general, however, the first quarter moon will rise at around noon and set at around midnight.
Secondly, it's worth noting that the first quarter moon is actually only visible during the daytime. This is because the moon is at its highest point in the sky at noon, which means that it is at its most visible during this time. However, the moon will still be visible in the evening sky, even though it won't be quite as bright as it is during the day.So, in summary, the first quarter moon rises at around noon and sets at around midnight. However, it's important to remember that the exact timing of the moonrise and moonset varies depending on where you are in the world, and that the moon is most visible during the day, even though it can still be seen in the evening sky.
to know about first quarter moon visit:
https://brainly.com/question/31201204
#SPJ11
deep underground, rocks are hot and ________-_______
Deep underground, rocks are hot and under high pressure. This is due to the increasing temperature and pressure gradient as one goes deeper into the Earth.
The geothermal gradient is about 25 to 30°C per kilometer in the Earth's crust. As a result, the deeper you go underground, the hotter it gets. The temperature beneath the Earth's surface rises by about 1°C for every 30 meters in depth.The high temperatures and pressures in the Earth's interior cause the rocks to become ductile and plastic, rather than brittle. Rocks in the lower crust and upper mantle are believed to flow, much like putty or plastic, due to this heat and pressure. This plastic flow contributes to the Earth's tectonic activity and is responsible for the movement of the Earth's tectonic plates. It also creates geological structures such as mountains, volcanic chains, and oceanic trenches. As a result, the Earth's deep interior is a dynamic environment, with numerous phenomena that scientists are still attempting to comprehend.
to know about pressure gradient visit:
https://brainly.com/question/2530102
#SPJ11
Analyzing and interpreting maps (e.g., topographic, geologic,
fault) to complete geology assignments.
The geological science is a wide field of study that encompasses the nature, processes, and history of the Earth. Analyzing and interpreting maps is a key aspect of geological research. Maps are important geological tools, particularly in the study of geology.
Geologic maps help geologists to understand the earth's structure, history, and the features on the earth's surface, for instance, fault lines, mineral deposits, mountains, rivers, and so on.
Maps are a useful tool for interpreting, analyzing, and presenting geological data. Topographic maps are used by geologists to show the elevation and contours of the earth's surface. These maps can be used to determine the slope of the land and the direction of water flow. They are also useful in identifying areas that are prone to flooding, landslides, and erosion.Geologic maps are used to describe the rock formations, faults, and other geologic features of an area. These maps use symbols and colors to indicate the different types of rocks and minerals.
A geologic map can help identify the types of rocks that are present in an area, as well as the age of those rocks.Fault maps are used to show the location of faults, which are cracks or fractures in the earth's surface. Faults are important geological features because they can cause earthquakes, landslides, and other natural disasters. By analyzing fault maps, geologists can identify areas that are at risk for these types of events.To complete geology assignments, it is important to learn how to analyze and interpret maps. Geologists use maps to understand the earth's structure, history, and the features on the earth's surface. By using topographic maps, geologic maps, and fault maps, they can gain valuable insights into the geological processes that have shaped our planet.
To know more about Geologic maps visit:
https://brainly.com/question/11639207
#SPJ11
sedimentary rocks are usually comprised of material that comes primarily from ______. multiple choice question. the same place the rock forms the ground below other locations
The correct option for the given statement is "the ground below."Sedimentary rocks are formed from the accumulation of sediment grains.
These sediments come from various sources, such as rocks, minerals, organic matter, and other living organisms. Sediments are transported and deposited by natural processes like water, wind, and glaciers, and then compacted and cemented together over time to form sedimentary rocks.Sedimentary rocks are usually made up of different-sized sediment grains that have been lithified or cemented together.
hey may contain various types of fossils and organic matter, depending on the source of the sediments. The sedimentary rock types include sandstone, limestone, shale, and conglomerate. The study of sedimentary rocks provides insights into the Earth's geological history, including past climates, environments, and life forms.
To know more about Sedimentary visit
https://brainly.com/question/33526756
#SPJ11
Why is "-zoic" part of so many names of units in the geologic time scale? The suffix zoic denotes that a term refers to rocks and/or lithology. The suffix zoic indicates that a unit of time is a geologic era. The boundaries of geologic time units with names ending in zoic have been determined by worldwide changes in life forms. The suffix zoic is derived from the name of the original geologist who drafted the first geological time scale. The geologic time units with names that end in zoic describe times in Earth's history when life existed, whereas any time period that does not end in zoic completely lacked life.
The suffix "-zoic" is part of many names in the geologic time scale because it indicates that a unit of time is a geologic era and refers to rocks and/or lithology. It also signifies that the boundaries of these time units were determined by changes in life forms.
The suffix "-zoic" is used in many names of units in the geologic time scale for several reasons. First, it indicates that a particular unit of time is a geologic era, such as the Mesozoic era. Second, it denotes that the term refers to rocks and/or lithology, highlighting the geological nature of the unit. Additionally, the boundaries of these time units, which end in "-zoic", have been determined by worldwide changes in life forms, providing valuable information about the evolution of life on Earth.
It is important to note that the suffix "-zoic" is not derived from the name of the original geologist who drafted the first geological time scale, as mentioned in the question. Lastly, geologic time units with names ending in "-zoic" describe times in Earth's history when life existed, whereas units without this suffix indicate time periods that lacked life.
Learn more about geologic era here:
https://brainly.com/question/30551972
#SPJ11
which set of magma conditions produces the most explosive eruptions?
The set of magma conditions that produces the most explosive eruptions are those where high viscosity magma is produced by the cooling of rising basaltic magma.
Viscosity is a measure of a material's resistance to flow. It is a measure of how well a liquid resists being moved around, for example, through a pipe or between two surfaces. A higher viscosity liquid is more viscous than a lower viscosity liquid.
Magma is molten rock beneath the Earth's surface that contains both liquids and solids. It's a partially liquid material that's made up of minerals, dissolved gases, and hot, molten rock.
Explosive volcanic eruptions occur when magma rises to the surface and then abruptly explodes. They may eject volcanic ash, rocks, pyroclastic debris, and volcanic gas into the atmosphere, as well as lava and pyroclastic flows along the flanks of the volcano.
The composition of the magma, the level of dissolved gases in the magma, and the type of eruption are all important factors in determining how explosive a volcanic eruption can be.
To know more about Volcano visit:
https://brainly.com/question/12945128
#SPJ11
You and your exploration team are stuck on a steep slope in the Andes Mountains in Argentina. A deadly winter storm is approaching and you must get down the mountain before the storm hits. Your path leads you around an extremely slippery, horizontal curve with a diameter of 90.0 m and banked at an angle of 40.0° relative to the horizontal. You get the idea to unpack the toboggan that you have been using to haul supplies, load your team upon it, and ride it down the mountain to get enough speed to get around the banked curve. You must be extremely careful, however, not to slide down the bank: at the bottom of the curve is a steep cliff.
(a) Neglecting friction and air resistance, what must be the speed of your toboggan in order to get around the curve without sliding up or down its bank? Express your answer in m/s and m.p.h.
(b) You will need to climb up the mountain and ride the toboggan down in order to attain the speed you need to safely navigate the curve (from part (a)). The mountain slope leading into the curve is at an angle of 30.0° relative to the horizontal, and the coefficient of kinetic friction between the toboggan and the surface of the slope is (μmountain = 0.12). How far up the mountain (distance along the slope, not elevation) from the curve should you start your ride? Note: the path down the mountain levels off at the bottom so that the toboggan enters the curve moving in the horizontal plane (i.e., in the same plane as the curve).
a) The toboggan must be traveling at approximately 14.9 m/s or 33.3 mph to safely navigate the curve
b) you should start your ride approximately 10.8 meters up the mountain from the curve to attain the necessary speed.
(a) To determine the speed required to get around the curve without sliding up or down its bank, we can analyze the forces acting on the toboggan.
The centripetal force required to keep the toboggan moving in a circular path is provided by the horizontal component of the normal force.
The vertical component of the normal force cancels out the gravitational force.
Let's denote the speed of the toboggan as v and the angle of banking as θ. The centripetal force is given by:
Centripetal force = mv² / r,
where, m is the mass of the toboggan and r is the radius of the curve (half the diameter).
The horizontal component of the normal force is:
Horizontal component of normal force = m * g * tan(θ),
where, g is the acceleration due to gravity.
Equating the centripetal force and the horizontal component of the normal force, we get:
mv² / r = m * g * tan(θ).
Simplifying and solving for v, we find:
v = √(g * r * tan(θ)).
Substituting the given values:
v = √(9.8 m/s² * 45.0 m * tan(40.0°)) ≈ 14.9 m/s.
Converting to miles per hour (mph):
v ≈ 14.9 m/s * 2.24 mph/m = 33.3 mph.
Therefore, the toboggan must be traveling at approximately 14.9 m/s or 33.3 mph to safely navigate the curve.
(b) To find the distance up the mountain from the curve where you should start your ride, we need to consider the work done against friction to climb up the mountain and gain the necessary speed.
The work done against friction is given by:
Work = friction force * distance,
where the friction force is the product of the coefficient of kinetic friction (μmountain), the normal force (mg), and the distance up the mountain (d).
The normal force is equal to mg * cos(θmountain), where, θ mountain is the angle of the mountain slope.
Setting the work done against friction equal to the change in kinetic energy, we have:
μmountain * m * g * d = 0.5 * m * v²,
where, m is the mass of the toboggan.
Simplifying and solving for d, we find:
d = (0.5 * v²) / (μmountain * g).
Substituting the given values:
d = (0.5 * (14.9 m/s)²) / (0.12 * 9.8 m/s²) ≈ 10.8 m.
Therefore, you should start your ride approximately 10.8 meters up the mountain from the curve to attain the necessary speed.
Learn more about Centripetal Force:
https://brainly.com/question/898360
#SPJ11
which of the following best describes the temperature of materials typically erupted from volcanoes?
The correct answer is "very hot, usually above 700°C (1300°F)."Materials that are typically erupted from volcanoes tend to be extremely hot, usually at temperatures above 700°C (1300°F).
In a volcanic eruption, magma or molten rock is expelled, and as it cools, it solidifies into various types of igneous rocks.The temperature of magma can vary greatly depending on its chemical composition, but it is usually between 700 and 1,300 degrees Celsius (1,292 to 2,372 degrees Fahrenheit).
Lava is a term used to describe magma that has flowed out onto the Earth's surface, and it also has a temperature of around 700°C to 1,200°C (1,292 to 2,192°F).
To know more about Erupted visit
https://brainly.com/question/33526823
#SPJ11
Describe how the Thermohaline Circulation is connected to global climate change, both with regard to the past and to future changes
Thermohaline circulation is a deep ocean movement caused by the density differential between warm and cold water, as well as fresh and saline water. This is a 'conveyor belt' that connects important surface and deep water currents in multiple seas such as the Atlantic, Indian, Pacific, and Southern seas.
The conveyor belt gets its name from the fact that it transports precipitation and warm water from the equator to the poles, as well as cold water form the poles back to the tropics. This contributes to a more even distribution for solar radiation reaching the surface of the planet, which aids in the regulation of global climate change.
Because of global warming, glacial sheets in the polar regions are melting and providing fresh water to the oceans, disrupting the thermohaline circulation process and affecting global climate. As a result, regional temperatures are becoming more severe, with equatorial parts rising hotter and polar areas becoming colder.
Learn more about Thermohaline, here:
https://brainly.com/question/29012308
#SPJ4
In The Wizard of Oz, Dorothy awakens in Munchkinland where her house has been blown by a tornado. If the house was hovering stationary in midair and fell from a height of 3,083 m, with what speed did it hit the Wicked Witch of the East when it landed?
The speed with which the house hit the Wicked Witch of the East was 223.8 m/s
In The Wizard of Oz, Dorothy awakens in Munchkinland where her house has been blown by a tornado.
The kinetic energy of the house just before it hits the Wicked Witch of the East can be calculated using the formula
KE= 1/2 mv²
where m is the mass of the house and v is its speed just before it hits the Wicked Witch of the East. To solve for v, we can use the following steps:
Step 1:
Calculate the gravitational potential energy of the house before it is dropped using the formula GPE = mgh
where m is the mass of the house, g is the acceleration due to gravity (9.8 m/s²), and h is the height from which it was dropped. GPE = mgh = (m)(9.8 m/s²)(3,083 m) = 30,292m.
Step 2:
Equate the gravitational potential energy before the drop to the kinetic energy just before hitting the ground.KE = GPEKE = 30,292J
Therefore, the speed with which the house hit the Wicked Witch of the East was 223.8 m/s.
To know more about energy visit:
https://brainly.com/question/1932868
#SPJ11
48. What is the No. 1 method to deal with municipal solid waste (MSW) in the US? ( )
A. Incineration; B. Recycling; C. Landfilling; D. Compost
51. Which of the following is closest to the fraction of recycled MSW in the overall U.S. MSW? ( )
A. 13%; B. 33%; C. 55%; D. 75%
52. ___ and carbon dioxide are the major gases formed from landfills due to the waste digestion. ( )
A. Methane; B. Oxygen; C. Nitrogen; D. Hydrogen
53. Landfills can cause pollution to local groundwater and soil due to the release of ____ ( )
A. landfill leachate; B. carbon dioxide; C. greenhouse gases;
D. Hydrogen
54. Based the data from a seismic station at Dallas, TX, we found that the distance the epicenter of an
earthquake from this station is 600 miles. Based on your estimate, the epicenter is NOT in
A. New Mexico; B. Maryland ; C. Illinois; D. Colorado
Recycling, is the No. 1 method to deal with municipal solid waste (MSW) in the US. 33%, is closest to the fraction of recycled MSW in the overall U.S. MSW. Methane and carbon dioxide are the major gases formed from landfills due to the waste digestion. Thus, option 48. (b), 51. (b), 52. (a), 53. (a), 54. (d).
The US's top two methods for managing municipal solid waste are recycling and composting, which the EPA estimates were used to dispose of around 69 million tons and 25 million tons, respectively, of the MSW produced in the country in 2018.
In 2018, the US produced 292.4 million tons of MSW, according to the EPA. A recycling rate of 23.6% was achieved with 69.0 million tons of MSW. Methane, carbon dioxide, and a trace quantity of non-methane organic molecules make up most of the gas released by landfills, in nearly equal parts.
Therefore, option 48. (b), 51. (b), 52. (a), 53. (a), 54. (d) is correct.
Learn more about on carbon dioxide, here:
https://brainly.com/question/3049557
#SPJ4
What
is climate? and How Does the Climate System Work, Write a
summary of the key points made:
Define climate as opposed to weather.
What are the basic components of climate?
What is the main driver
Climate refers to the long-term patterns and trends of weather conditions in a specific region over a period of time, typically 30 years or more. It is different from weather, which refers to the short-term atmospheric conditions in a particular location.
The basic components of climate include temperature, precipitation, humidity, wind patterns, and atmospheric pressure. These factors work together to determine the overall climate of a region. For example, a region with high average temperatures and low precipitation may have a desert climate, while a region with moderate temperatures and high precipitation may have a rainforest climate.
The main driver of the climate system is the energy received from the Sun. The Sun's energy heats the Earth's surface and atmosphere, leading to the formation of air masses and circulation patterns. The uneven distribution of this energy across the Earth's surface, due to factors such as the tilt of the Earth's axis and the rotation of the planet, creates variations in temperature and weather patterns.
In summary, climate is the long-term patterns of weather conditions, while weather refers to short-term atmospheric conditions. The basic components of climate include temperature, precipitation, humidity, wind patterns, and atmospheric pressure. The main driver of the climate system is the energy received from the Sun.
To know more about precipitation, visit:
https://brainly.com/question/18109776
#SPJ11
All of the following are characteristics of temperate broadleaf
and mixed forests except...
A. dominated by deciduous trees
B. soils rich in organic matter
C. freeze-tolerant plants
D. warm temperatur
All of the following are characteristics of temperate broadleaf and mixed forests except warm temperatures. The correct answer is D. warm temperatures.
Temperate broadleaf and mixed forests are characterized by several key features. They are dominated by deciduous trees, which means that the trees in these forests shed their leaves during the colder months. This allows them to conserve energy and survive the winter. So, option A is a characteristic of these forests.
The soils in temperate broadleaf and mixed forests are rich in organic matter. This organic matter comes from the decomposing leaves and other plant material that accumulate on the forest floor. The decomposition of this organic matter enriches the soil, making it fertile and nutrient-rich. So, option B is also a characteristic of these forests.
Freeze-tolerant plants are another characteristic of temperate broadleaf and mixed forests. These plants have adaptations that allow them to survive freezing temperatures, such as antifreeze compounds in their cells. This allows them to continue functioning even when temperatures drop below freezing. So, option C is also a characteristic of these forests.
Therefore, the correct answer is D. warm temperatures. Temperate broadleaf and mixed forests are not characterized by warm temperatures. Instead, they experience distinct seasons, including cold winters and warm summers. The temperatures can vary greatly throughout the year, but warm temperatures are not a defining characteristic of these forests.
To know more about Temperate broadleaf, visit:
https://brainly.com/question/26285882
#SPJ11
Which of the following is a way in which people might mitigate climate change? a. Adjust crop species grown in the midwest to account for increased temperatures and likelihood of drought b. Reduce emissions of greenhouse gases from transportation by switching from fossil fuel-burning power plants to renewable energy generation from sources like solar and wind c. Increase capacity of stormdrain infrastructure to accommodate large possible floods during extreme rainfall events like hurricanes on the Gulf Coast d. Require homes near dry forests in the semiarid west to be surrounded by a protective buffer of open space and have tile roofs to protect from wild fires e. Move vulnerable populations to higher elevations near coasts to avoid flooding from sea level rise
One way in which people might mitigate climate change is by reducing emissions of greenhouse gases from transportation. This can be achieved by switching from fossil fuel-burning power plants to renewable energy generation from sources like solar and wind. Option b is the correct choice.
By utilizing these clean energy sources, we can decrease the amount of greenhouse gases released into the atmosphere, which contribute to climate change.
Another way to mitigate climate change is by adjusting the crop species grown in the Midwest to account for increased temperatures and the likelihood of drought. As climate change leads to changing weather patterns, it becomes essential to select crop species that are more resilient to these conditions. By doing so, we can ensure food security and adapt to the changing climate.
Increasing the capacity of storm drain infrastructure is another method of mitigating climate change. This can help accommodate large possible floods during extreme rainfall events like hurricanes on the Gulf Coast. By improving storm drain systems, we can minimize the damage caused by flooding and reduce the impact of climate change on coastal communities.
Requiring homes near dry forests in the semiarid west to be surrounded by a protective buffer of open space and have tile roofs is also a way to mitigate climate change. This measure aims to protect these areas from wildfires. By implementing these precautions, we can reduce the risk of fires spreading and causing further damage to the environment and nearby communities.
Moving vulnerable populations to higher elevations near coasts to avoid flooding from sea level rise is another strategy to mitigate climate change. As sea levels rise due to climate change, coastal areas become more prone to flooding. By relocating vulnerable populations to higher elevations, we can ensure their safety and reduce the impact of rising sea levels.
These are just a few examples of the ways in which people can mitigate climate change. It's important to implement a combination of strategies that address different aspects of the issue in order to have a significant impact on reducing the effects of climate change.
To know more about storm drain infrastructure, visit:
https://brainly.com/question/32230473
#SPJ11
During volcanic eruptions, chunks of solid rock can be blasted out of the volcano; these projectiles are called volcanic bombs. The figure shows a cross section of Mt. Fuji, in Japan. (a) At what initial speed would a bomb have to be ejected, at angle θ
0
=42
∗
to the horizontal, from the vent at A in order to fall at the foot of the volcano at B, at vertical distance h=3.40 km and horizontal distance d =9.10 km ? Ignore, for the moment, the effects of air on the bomb's travel. (b) What would be the time of flight? (a) Number Units (b) Number Units
During volcanic eruptions, the chunks of solid rock blasted out of the volcano are called volcanic bombs.
Here, we have to find the initial speed of the bomb at angle θ = 42° to the horizontal so that it falls at the foot of the volcano at B, at vertical distance h = 3.40 km and horizontal distance d = 9.10 km. We need to ignore, for the moment, the effects of air on the bomb's travel. Let's calculate the initial speed required in (a).
(a) Initial speed required:To calculate the initial speed required, we can use the formula for the horizontal range of a projectile:x = v0cosθt, where v0 is the initial speed of the projectile, θ is the angle of projection, and t is the time of flight.We can also use the formula for the vertical displacement of a projectile:y = v0sinθt - (1/2)gt², where g is the acceleration due to gravity.To calculate the initial speed, we can use the following steps:At the foot of the volcano at B, the horizontal distance d = 9.10 km and vertical distance h = 3.40 km.The horizontal distance travelled by the projectile, x = 9.10 km = 9100 m.
The vertical distance travelled by the projectile, y = 3.40 km = 3400 m.The angle of projection, θ = 42°.The acceleration due to gravity, g = 9.8 m/s².We can use the formula for y to find the time of flight, t:y = v0sinθt - (1/2)gt² => 3400 = v0sin42°t - (1/2)(9.8)t²We can use the formula for x to find the initial speed, v0:x = v0cosθt => 9100 = v0cos42°t => t = 9100 / (v0cos42°)Substitute this value of t in the formula for y:3400 = v0sin42°(9100 / (v0cos42°)) - (1/2)(9.8)(9100 / (v0cos42°))²We can simplify this equation as follows:tan42° = y/x => v0² = (x² + y²) / (2xytan42°)Substitute the values of x, y, and θ:v0² = [(9100)² + (3400)²] / [2(9100)(3400)tan42°]v0 = √(2gh), where g is the acceleration due to gravity and h is the height of fall of the bomb.v0 = √(2 × 9.8 × 3400) = 836 m/s
Therefore, the initial speed required is 836 m/s.(b) Time of flight:To calculate the time of flight, we can use the formula for x:x = v0cosθt => t = x / (v0cosθ)Substitute the values of x, v0, and θ:t = 9100 / (836 × cos42°) ≈ 14 sTherefore, the time of flight is 14 s.
To know more about Eruption visit
https://brainly.com/question/33523057
#SPJ11
8. ________ is rock made up of liquid magma and solid rock fragments that were ejected
explosively from a volcanic vent.
A. volcanic ash; B. pyroclastic rock;
C. aa; D. pahoehoe
9. __________ typically is a large, gently sloping volcanic mountain formed by successive flows of
basaltic magma.
A. shield volcano; B. cinder cone;
C. composite cone; D. pluton
10. What is among the primary components in ash flow??
A. sand; B. gas;
C. ash-flow tuff; D. water
Pyroclastic rock, is rock made up of liquid magma and solid rock fragments that were ejected explosively from a volcanic vent. Shield volcano, typically is a large, gently sloping volcanic mountain formed by successive flows of basaltic magma.
Ash-flow tuff, is among the primary components in ash flow. Thus, option (b), (a), (c) is correct.
Pyroclastic or fire fragments are what are meant by the term. A form of volcaniclastic deposit is pyroclastic rocks, which are deposits mostly composed of volcanic ash.
Shield volcanoes are much wider than they are tall, and since they are flatter near the peak, they have a convex shape.
It is a streaming mixture of angular rocks and volcanic ash that frequently results from the gravitational collapse of lava flows or lava domes.
Learn more about on pyroclastic, here:
https://brainly.com/question/31712134
#SPJ4
