To determine your latitude and longitude and identify the landmass or ocean you are on or in, we can use the given information about the angle of Polaris and the time at Greenwich, England.
1. Polaris, also known as the North Star, is located almost directly above the Earth's North Pole. It appears to be stationary in the night sky and can be used as a reference point for navigation.
2. At 11:32 pm, you estimated the angle of Polaris from the vertical to be 35°. This angle is known as the altitude of Polaris.
3. The altitude of Polaris can be used to determine your latitude. The latitude is the angular distance north or south of the equator and is measured in degrees.
4. Since Polaris is almost directly above the North Pole, its altitude is equal to the observer's latitude. Therefore, based on the given information, your latitude is approximately 35° north.
To know more about Latitude, visit:
https://brainly.com/question/30459307
#SPJ11
How do we know what greenhouse gas concentrations and temperature were in Earth's past? all of these answers are correct. Air bubbles trapped in ice cores provide detailed records of the past. Tree rines show the history of drought, fire, and other environmental variations. Examining organisms in marine sediments can tell us what the temperature was in the past. Observing pollen in ancient lake beds indicate the plant species that lived there at curing different times.
Greenhouse gas concentrations and temperature records in the Earth's past are obtained through various methods. The use of air bubbles trapped in ice cores, tree rings, marine sediments and ancient lake beds provides a detailed history of these changes.
Air bubbles trapped in ice cores contain carbon dioxide (CO2) and other greenhouse gas concentrations that show the climate and atmospheric changes over time. By studying ice cores, scientists can find out how much greenhouse gases were in the atmosphere at any given time, as well as how the climate was affected.Tree rings provide another method of studying past climates. The thickness, spacing, and type of tree rings indicate environmental factors such as drought, fire, and other environmental variables.
The age and location of the trees provide a basis for interpreting these factors. Examining the organisms in marine sediments helps scientists know the temperature in the past. The sediments contain microscopic fossils of marine organisms, and their composition varies according to temperature. Pollen from ancient lake beds helps scientists to learn the plant species that lived at a given time, as well as the environmental conditions that allowed these plants to flourish. In conclusion, these methods are some of the ways that scientists have determined the greenhouse gas concentrations and temperature records in the Earth's past.
To know more about Greenhouse gas visit:
https://brainly.com/question/30674591
#SPJ11
which of these rock types are clastic sedimentary rocks? multiple select question. limestone gneiss shale marble conglomerate obsidian sandstone
The following rock types are clastic sedimentary rocks: Shale,Sandstone, Conglomerate. The correct option from the given options is the one which states that Shale, Sandstone, and Conglomerate are clastic sedimentary rocks.
Clastic sedimentary rocks are formed from minerals and rock fragments that are transported and deposited by water, wind, or glaciers.
Clastic sedimentary rocks are created through the process of weathering, erosion, transportation, deposition, and lithification. Their origin and composition are determined by the size of their particles and the processes that were involved in their formation.
The clastic sedimentary rocks are often layered or stratified, reflecting the sequential depositional environment and the variation in grain size.
To know more about Clastic sedimentary rocks visit:
https://brainly.com/question/30553283
#SPJ11
the epicenter of the earthquake is directly below the focus
It is true an earthquake is a natural disaster caused by a sudden release of energy in the Earth's crust. Earthquakes can be destructive and cause massive loss of lives, as well as damage to buildings, bridges, and roads.
The focus is the point within the Earth's crust where the earthquake originates, while the epicenter is the point on the Earth's surface directly above the focus. The epicenter is the point of greatest shaking intensity and where most of the damage is often observed.
Seismic waves, which are generated by the energy released by the earthquake, travel from the focus in all directions through the Earth's crust, and when they reach the surface, they cause the ground to shake. The epicenter is located directly above the focus, and its location can be determined using seismographs.
In conclusion, the epicenter of an earthquake is the point on the Earth's surface that is located directly above the focus, and the location of the epicenter can be determined by using seismographs. When an earthquake occurs, seismic waves radiate from the focus and travel through the Earth's crust to the surface, causing the ground to shake and resulting in damage to structures and loss of lives.
To know more about earthquake visit:
https://brainly.com/question/31641696
#SPJ11
Complete question: The epicenter of the earthquake is directly below the focus.
a. True b. False
5.1 Describe the difference between the Mediterranean Sea and
Pacific Oceans in terms of their relative stage within the Wilson
cycle. Which ocean basin is younger? Which is older?
The Mediterranean Sea is in the closing stage of the Wilson cycle, making it younger, while the Pacific Ocean is in the opening stage, making it older.
The Wilson cycle describes the life cycle of an ocean basin, which includes opening and closing stages. In the opening stage, tectonic plates move apart, leading to the formation of a larger ocean basin. The Pacific Ocean is in this stage, as it has been expanding due to the movement of the Pacific Plate.
In contrast, the Mediterranean Sea is in the closing stage. It is surrounded by converging tectonic plates, such as the African and Eurasian plates, which are colliding and causing the Mediterranean basin to close. As a result, the Mediterranean Sea is relatively younger compared to the Pacific Ocean. Understanding the relative stages within the Wilson cycle helps us comprehend the geological processes shaping the Earth's surface and the age differences between different ocean basins.
Learn more about Wilson cycle here:
https://brainly.com/question/32991603
#SPJ11
CLR 1 - Explain the concept of environmental citizenship and provide examples demonstrating the roles and responsibilities of people within the global ecosystem. - CLR 2 - Relate the history of environmental trends to contemporary society and to future direction. - CLR 3 - Explain the relationships between poverty, education, health and environmental sustainability - CLR 4 - Identify your day-to-day practices and their impact on the global ecosystem and, in tum, the global ecosystem's reciprocal impact on you. - CLR 5 - Explain the concept of ecological footprint and identify ways in which personal environmental impact can be mitigated.
Environmental citizenship is based on the idea that every one of us must assume long-term responsibility for how we interact with the environment.
Examples of the obligations that humans have within the global ecosystem. adoption of a sustainable lifestyle that adheres to the 3R principle of "Reduce, Reuse, Recycle." Avoiding tree chopping will encourage tree planting. Keep up with appropriate garbage disposal. Become a vegetarian to break the habit of eating meat.
Join and provide your support to a group trying to protect forests and animals. Environmental citizenship includes the freedom to choose sustainable behavior, uphold equitable environmental legislation, and support sustainable arrangements (Bell 2005).
Learn more about environmental citizenship here:
https://brainly.com/question/31460173
#SPJ4
What was the accepted theory that explained mountains prior to
the acceptance of plate tectonics?
a. Perihelion Dynamics
b. Shrinking Earth
c. Geocentricity
d. Continental Arête
The accepted theory that explained mountains prior to the acceptance of plate tectonics was the Shrinking Earth theory, indicated by option b.
According to this theory, it was believed that mountains were formed as a result of the Earth's crust contracting and wrinkling due to the cooling and shrinking of the planet. This theory proposed that the Earth's surface underwent a process of contraction, causing the formation of mountain ranges. However, with the advancement of scientific understanding and the development of plate tectonics theory in the 1960s, the Shrinking Earth theory was gradually replaced. Plate tectonics provided a more comprehensive and accurate explanation for the formation of mountains, highlighting the movement and interaction of Earth's tectonic plates as the primary mechanism for mountain building.
To learn more about Shrinking Earth theory, click here:
https://brainly.com/question/16944828
#SPJ11
What the normal and shear stresses at a point on a fault which dips30
∘
N and strikes E-W. σ
1
and σ
2
are horizontal while σ
3
is vertical. σ
1
is N-S.
σ
1
=4 kb
σ
2
=2 kb
σ
3
=1 kb
At a point on a fault that dips 30 degrees N and strikes E-W, we can determine the normal and shear stresses using the given information.
The normal stress is the stress acting perpendicular to the surface of the fault. In this case, since the fault dips 30 degrees N, the normal stress is vertical, which is σ3. From the given information, σ3 = 1 kb (kilo bar).
The shear stress is the stress acting parallel to the surface of the fault. Since the fault strikes E-W, the shear stress is horizontal. We are given that σ1 is N-S (North-South) and σ2 is horizontal, but we don't know which one is the shear stress. We need more information to determine the shear stress accurately.
However, we can determine the maximum and minimum principal stresses. The maximum principal stress (σ1) is the largest stress acting at the point, and the minimum principal stress (σ3) is the smallest stress acting at the point. From the given information, σ1 = 4 kb and σ3 = 1 kb.
To summarize:
- The normal stress at the point is σ3 = 1 kb (vertical).
- The shear stress at the point cannot be determined accurately without more information.
- The maximum principal stress at the point is σ1 = 4 kb.
- The minimum principal stress at the point is σ3 = 1 kb.
To know more about normal stress, visit:
https://brainly.com/question/31938748
#SPJ11
Which of the following silicate minerals is one of the common
rock forming minerals of the Earth's crust?
Garnet
Calcite
Pyroxene
Pyrite
Among the options provided, pyroxene is one of the common rock-forming minerals of the Earth's crust. Thus, option C is the correct option.
Pyroxene is indeed one of the common rock-forming minerals of the Earth's crust. It is a group of silicate minerals that play a significant role in the composition and formation of various types of rocks. Pyroxene minerals, including augite, diopside, and enstatite, are abundant in igneous and metamorphic rocks. They form as a result of the solidification and crystallization of magma or as a result of high-temperature and high-pressure metamorphism.
Pyroxene minerals are often found in mafic and ultramafic rocks, such as basalt and peridotite, which are prevalent in the Earth's oceanic crust and upper mantle. Their presence contributes to the overall mineralogy and physical properties of these rocks, impacting their texture, color, and density.
Learn more about Pyroxene here:
https://brainly.com/question/30031364
#SPJ4
Which of the following post WWII advancements did not aid the
development of plate tectonic theory in the 1960's and 70's?
Sonar (mapping the seafloor)
Determining the age of the seafloor
The advancement that did not aid the development of plate tectonic theory in the 1960's and 70's is determining the age of the seafloor. Sonar, on the other hand, played a significant role in the development of plate tectonic theory during this period.
Sonar, which stands for "sound navigation and ranging," helped scientists map the seafloor. By using sound waves, sonar technology was able to measure the depth of the ocean and create detailed maps of the underwater topography. This mapping provided crucial evidence for the theory of plate tectonics, as it revealed the existence of mid-ocean ridges and deep-sea trenches.
Determining the age of the seafloor, however, did not directly aid the development of plate tectonic theory in the 1960's and 70's. It was only later, with the discovery of magnetic striping on the seafloor, that scientists were able to determine the age of the oceanic crust and make connections to plate tectonics. This discovery came after the initial development of the theory in the 1960s and 70s.
In summary, while sonar technology, which helped map the seafloor, was crucial in the development of plate tectonic theory in the 1960s and 70s, determining the age of the seafloor did not directly contribute to the theory during that time period.
To know more about mid-ocean ridges, visit:
https://brainly.com/question/7666628
#SPJ11
These imaginary lines circle the Earth from north to south ____________.
longitudes
latitudes
degrees
absolute locations
These imaginary lines that circle the Earth from north to south are called longitudes.
Longitudes are the imaginary lines that run from the North Pole to the South Pole, intersecting the Equator at right angles. These are also known as meridians. It is an angular distance that specifies the east-west position of a point on the Earth's surface, measured from the Prime Meridian (the line of 0° longitude) that runs from the North Pole to the South Pole and passes through Greenwich, England. Longitudes are expressed in degrees, minutes, and seconds, and are denoted by the symbol °.
Latitudes, on the other hand, are the imaginary lines that encircle the Earth from east to west. It is the angular distance of a point north or south of the Earth's equator, measured in degrees. The equator is defined as 0° latitude, and the North and South poles are defined as 90° north and 90° south, respectively. The latitude is designated in degrees, minutes, and seconds, and it is indicated with the symbol °.
Absolute locations :
Absolute location is a term used to describe the precise location of a place on the earth's surface. This is a specific description of the place's global location, determined by a combination of latitude and longitude coordinates. The absolute location of a place gives its exact position on the earth, frequently measured with latitude and longitude degrees.
To know more about longitudes visit:
https://brainly.com/question/33112932
#SPJ11
Which of these is true? Points: 1 in North america, the Earth is farthest from the Sun during the summer Solaris is the southern star on the celestial sphere the Earth is 4.4 million years old a sidereal year is the same as a tropical year stars of equal brightness are located at the same distances Why is Pluto a dwarf planet and no longer regarded as a major planet? planets must have a minimum radius a planet cannot be made of icy material a dwarf planet is so small it cannot clear other objects out of its path a planet cannot have an orbital period more than 500 years planets cannot be further away from the sun than 50 au
The statement that is true among the following given options is that "a dwarf planet is so small it cannot clear other objects out of its path.
"Now, let's discuss why Pluto is a dwarf planet and no longer considered as a major planet:In 2006, the International Astronomical Union (IAU) demoted Pluto from the status of a planet to that of a dwarf planet. The IAU set the criterion that for an object to be classified as a planet, it must clear its orbit of debris. Pluto could not fulfill this criterion as it shares its orbit with other trans-Neptunian objects, so it is now classified as a dwarf planet.
There are 5 criteria to classify a planet, and one of them is that "it should have cleared its orbital zone of all debris". Since Pluto has not fulfilled this criterion, it is no longer classified as a planet, rather a dwarf planet.So, we can say that the reason Pluto is a dwarf planet and no longer regarded as a major planet is because a dwarf planet is so small it cannot clear other objects out of its path.
To know more about Planet visit
https://brainly.com/question/33524955
#SPJ11
If the Earth did not rotate (assume the sun revolves around the earth), air would A. Remain stagnant B. cool and rise at the poles, go to the tropics, heat, sink back to the surface, then travel along the surface back to the poles C. heat up in the tropics, rise, go poleward, cool, sink back to the surface, then travel along the surface back to the tropics D. travel west to east along lines of latitude.
If the Earth did not rotate (assume the sun revolves around the earth), air would cool and rise at the poles, go to the tropics, heat, sink back to the surface, then travel along the surface back to the poles.
A) Remain stagnant: The atmosphere would not have any winds and would stay still.
B) Cool and rise at the poles, go to the tropics, heat, sink back to the surface, then travel along the surface back to the poles: Due to a lack of heat from solar radiation, the poles would be cold, and the air would be dense. The air would be heated by the Sun at the equator, making it less dense and forcing it to rise. When the air rises, it cools down, and when it cools down, it becomes denser and sinks back to the surface, returning to the poles via the surface.
C) Heat up in the tropics, rise, go poleward, cool, sink back to the surface, then travel along the surface back to the tropics: This pattern is typical of a planet with a rotating Earth. The convection cells that move the atmosphere are driven by the Earth's rotation. On a non-rotating Earth, convection cells would form, but they would be vastly different than the ones that exist now.
D) Travel west to east along lines of latitude: This statement is incorrect. Wind direction is dictated by the atmosphere's rotation and temperature differences, which are generated by solar radiation. In addition, a lack of Coriolis force would cause the winds to be stronger.
To know more about Coriolis force visit:
https://brainly.com/question/31959410
#SPJ11
the solid layer of rock beneath the soil is called
The solid layer of rock beneath the soil is called bedrock.
Bedrock is the solid rock layer that underlies the soil or other unconsolidated material on the earth's surface. It's usually an unweathered and unconsolidated rock layer, which implies that the rock hasn't undergone any weathering or erosion.
The solid layer of rock beneath the soil is known as bedrock. Bedrock is the solid rock layer that lies beneath the soil or any other unconsolidated material that covers the earth's surface. It is a type of rock that has not been weathered or eroded yet. It's usually found beneath a layer of soil or gravel that is softer than the rock itself.
Bedrock also determines the type of soil that develops in an area and plays an important role in determining the geological landscape. Bedrock can be composed of various materials, including sedimentary, igneous, or metamorphic rocks, depending on the location.
To know more about bedrock visit:
https://brainly.com/question/2259373
#SPJ11
compared with earth's diameter, the diameter of mars is
Compared to the Earth's diameter, the diameter of Mars is small. The diameter of Mars is approximately 4,220 miles, while the diameter of Earth is about 7,926 miles. In other words, Mars is only 53 percent the size of Earth.
This makes Mars the second smallest planet in the solar system, following behind Mercury. However, Mars has several unique features, such as its red color that is due to iron oxide (rust) in the soil, and its extensive network of canyons and valleys. Additionally, Mars has the largest volcano and deepest canyon in the solar system, Olympus Mons and Mars Marineris, respectively.
Despite being smaller than Earth, Mars is still an important planet for study and exploration, as it has the potential to support microbial life and possibly even human colonization in the future. Its proximity to Earth also makes it a prime target for scientific research and exploration.
To know more about Mars visit:
https://brainly.com/question/29186894
#SPJ11
After viewing "Inside the Mind of Edward Snowden" what is your
response to the media's portrayal of U.S. Surveillance Programs in
the social constuction of terrorism and justice policies. In your
opin
After viewing "Inside the Mind of Edward Snowden," the media's portrayal of U.S. Surveillance Programs in the social construction of terrorism and justice policies is a complex issue. There are several aspects to consider:
1. Surveillance: The media often highlights the extensive surveillance capabilities of the U.S. government, as revealed by Edward Snowden. This includes the collection of metadata, monitoring of communication networks, and mass surveillance programs like PRISM. The portrayal of surveillance programs underscores concerns about privacy and civil liberties.
2. Terrorism: The media's portrayal of U.S. Surveillance Programs in relation to terrorism focuses on the argument that these programs are necessary to prevent terrorist attacks. It is often emphasized that surveillance helps identify potential threats and disrupt terrorist networks. This portrayal highlights the importance of national security and the need for proactive measures.
3. Construction of terrorism: The media's portrayal influences the perception and understanding of terrorism. It can shape public opinion on the nature and extent of the threat. The portrayal of surveillance programs can contribute to constructing a narrative that emphasizes the constant presence of terrorist threats, potentially leading to an environment of fear and suspicion.
4. Justice policies: The media's portrayal of U.S. Surveillance Programs also raises questions about justice policies. It is often debated whether the collection of vast amounts of data and the potential infringement on privacy rights align with principles of justice, fairness, and the rule of law. The media may highlight concerns regarding oversight, accountability, and the balance between security and individual rights.
In conclusion, the media's portrayal of U.S. Surveillance Programs in the social construction of terrorism and justice policies is multifaceted. It highlights the tension between security and privacy, the perceived necessity of surveillance for counterterrorism efforts, and the potential implications for civil liberties and justice. It is important to critically analyze these portrayals and consider various perspectives to form an informed opinion.
To know more about potential , visit:
https://brainly.com/question/24142403
#SPJ11
What is a tarn?
Group of answer choices
a peak surrounded on all sides by cirques
a highly polished surface that is produced by glacial melt and sand mixing together
a rock-bound depression eroded out of bedrock by a glacier, and it is typically a lake
a series of stacked rocks piled up by an advancing glacier
A tarn is a rock-bound depression eroded out of bedrock by a glacier, and it is typically a lake. It is one of the most distinctive glacial landforms.
A tarn is a mountainous lake that is situated in a cirque, a glacial valley, or a fjord. The term tarn comes from the Old Norse language, where it refers to a little pond or lake.
A tarn is a deep lake surrounded by steep walls or cliffs, which can be a result of the glaciers that once covered the land.Tarns are well-known for their unique geological formations and beautiful scenery.
The lakes are fed by melting snow or rainwater, and their crystal-clear water is an ideal breeding ground for trout and other fish.
Due to their location, tarns are often an excellent destination for hikers and backpackers who wish to explore the surrounding wilderness in a peaceful and tranquil environment.
To know more about rock visit;
brainly.com/question/29898401
#SPJ11
Why is the purple anomaly not included in your calculations? Because we can't see it's outer edge, so we don't know its maximum age. Because the rocks that formed during the "purple anomaly" do not ha
The purple anomaly is not included in the calculations because its outer edge is not visible, and therefore, its maximum age is unknown. Additionally, the rocks that formed during the "purple anomaly" do not have the necessary data or characteristics to be included in the calculations.
1. The first reason the purple anomaly is not included in the calculations is because its outer edge is not visible. This means that we cannot determine the exact extent or boundaries of the anomaly. Since we do not have this information, it is impossible to accurately calculate its age or include it in any calculations.
2. The second reason is that the rocks formed during the "purple anomaly" do not have the necessary data or characteristics to be included in the calculations. The rocks that formed during this period may not have the same composition or properties as the other rocks being considered in the calculations. Without this important information, including the purple anomaly in the calculations could lead to inaccurate results.
In summary, the purple anomaly is not included in the calculations because its outer edge is not visible, making it impossible to determine its maximum age. Additionally, the rocks formed during the purple anomaly may not have the necessary data or characteristics to be included in the calculations.
To know more about rocks, visit:
https://brainly.com/question/19930528
#SPJ11
Which two coastal regions below can be classified as being located at an active plate margin?
Group of answer choices
A. BC and Yucatan
B. Yucatan and Cape Cod
C. BC and New Zealand
D. Ireland and New Zealand
The western coasts of North and South America are one example of active continental margins, where mountains are being formed, volcanoes and earthquakes occur, and deep oceanic trenches are found mainly in BC and New Zealand. Thus, option C is appropriate.
With the exception of a small area near the northern tip of the continent, South America is a continent that is totally located in the Western Hemisphere and primarily in the Southern Hemisphere. It is also sometimes referred to as the southern portion of the continent of America.
South of South America is where the Antarctic continent is located. The continent of Antarctica, which encircles the South Pole of the planet, is not continuously inhabited by people. The 5.4 million square mile continent is home to numerous animal species and the biggest desert on earth.
Thus, option C is correct.
Learn more about South America here:
https://brainly.com/question/11431632
#SPJ4
Earth's original atmosphere, several billion years ago, was the present atrnosphere. much different from completely unknown and thus cannot be compared to somewhat similar to although containing more
Earth's original atmosphere was much different from the present atmosphere that we have today. In the early stages of Earth's history, the planet's atmosphere was completely unknown, and therefore it cannot be compared to our current atmosphere.
However, scientists have managed to make educated guesses about the composition of the Earth's original atmosphere based on clues that were left behind. Some of the most widely accepted theories suggest that the Earth's original atmosphere contained a lot of hydrogen, helium, and water vapor. This would have given the early Earth an orange tint in the sky.
Over time, as the Earth began to cool down, the water vapor in the atmosphere began to condense, and it eventually led to the formation of oceans. As the oceans formed, they began to absorb carbon dioxide from the atmosphere, which led to the formation of limestone. This process continued for millions of years until we reached the atmosphere that we have today, which is somewhat similar to the original atmosphere but contains more oxygen and much less carbon dioxide.
To know more about atmosphere visit:
https://brainly.com/question/13958926
#SPJ11
Considering the location of the Sun in the sky through a year, where on Earth would you expect to find the greatest range of temperatures? Why?
The greatest range of temperatures would be expected to be found at higher latitudes on Earth, particularly near the poles.
Considering the location of the Sun in the sky through a year, the Earth's poles are inclined to the plane of the Earth's orbit. This implies that throughout the year, the polar regions are either constantly illuminated by sunlight or are facing away from the Sun. This causes a variation in the amount of sunlight, leading to an extensive range of temperatures from one season to the next. The region near the poles has a highly variable solar angle, which leads to widely varying levels of sunlight reaching the surface. The polar areas also experience highly variable cloudiness throughout the year, which further affects the amount of sunlight that reaches the surface. The area around the equator, on the other hand, has a more constant angle of solar incidence, with consistent amounts of sunlight throughout the year.
As a result, temperatures near the equator experience relatively small seasonal variations.
To know more about equator visit:
https://brainly.com/question/11562243
#SPJ11
How would you demonstrate your understanding of cryptographic
concepts? (15 Marks)
To encrypt or scramble messages before they are sent, the idea of cryptography is applied.
Utilizing codes to secure communications and information so that only the intended audience can decipher and process it is known as cryptography. therefore limiting access to information by unauthorized parties.
The features of cryptography are:
Confidentiality: The information is only accessible by the person for whom it is meant, and no one else may access it.Integrity: Information cannot be changed while being stored or sent between a sender and the intended recipient without the addition of new information being noticed.Non-repudiation: The person who creates or sends information cannot subsequently retract his original purpose to do so.Authentication: The sender's and receiver's identities are verified. Additionally, the information's origin and destination are verified.Learn more about Message here:
https://brainly.com/question/29329729
#SPJ4
is there a difference between the sea and the ocean
Yes, there is a difference between the sea and the ocean. A sea is a portion of the ocean that is partially enclosed by land, while an ocean is a vast body of saltwater that covers almost three-quarters of the planet's surface.
Sea and ocean are two distinct geographical features that share some similarities, but they are not the same thing. The main difference between them is that a sea is a smaller body of saltwater that is partially enclosed by land, while an ocean is a vast expanse of saltwater that covers over 70% of the Earth's surface. Let's discuss the differences between sea and ocean.
1. Size of Oceans are significantly larger than seas. The world's five oceans are the Atlantic, Pacific, Indian, Arctic, and Southern Oceans, and they cover approximately 70% of the planet's surface. On the other hand, seas are relatively small bodies of saltwater that are partially enclosed by land.
2. Depth of the Oceans are significantly deeper than seas. The average depth of an ocean is about 12,080 feet, while the average depth of a sea is about 200-300 feet.
3. Salinity of the Oceans and seas are both composed of saltwater, but the salinity levels differ. Salinity in the ocean is generally higher than in the sea because oceans have a more massive salt concentration than seas.
4. Connectivity of the Oceans are connected to other oceans, while seas are connected to other seas. Because of this, oceans share water across vast distances, while seas only share water across smaller distances.
5. Location of the Oceans are located between continents and extend over large areas of the earth's surface. In contrast, seas are found in areas where the land masses extend into the ocean. They are usually located near the coastlines and can be found in places where the sea floor is relatively shallow. In conclusion, seas are smaller bodies of saltwater that are partially enclosed by land, while oceans are vast bodies of saltwater that cover over 70% of the planet's surface. The two differ in size, depth, salinity, connectivity, and location.
to know about geographical features visit:
https://brainly.com/question/12323460
#SPJ11
The lithospheric plate that has a continent which has no mainland active volcanoes:
a. North American Plate
b. Eurasian Plate
c. African Plate
d. South American Plate
The lithospheric plate that has a continent with no mainland active volcanoes is the Eurasian Plate. The correct answer is option B.
The lithospheric plate that has a continent with no mainland active volcanoes is the Eurasian Plate. It covers most of Europe and Asia, including parts of Russia and the Middle East. Therefore, option B is correct. The Eurasian Plate is a significant tectonic plate that is mostly made up of continental crust. It is bordered by the North American Plate to the west and the African Plate to the south. The North American Plate is another lithospheric plate that is mostly made up of continental crust.
It extends from the western coast of North America to the mid-Atlantic ridge. The North American Plate is bordered by the Pacific Plate to the west, the Eurasian Plate to the east, and the Caribbean Plate to the south.The African Plate is a lithospheric plate that covers most of Africa, as well as parts of the Middle East and the Atlantic Ocean. It is mostly made up of continental crust, with some oceanic crust along its western border.
The African Plate is bordered by the Eurasian Plate to the north, the Arabian Plate to the northeast, and the Antarctic Plate to the south. The South American Plate is a lithospheric plate that covers most of South America, as well as parts of the Atlantic Ocean and the Antarctic Peninsula. It is mostly made up of continental crust, with some oceanic crust along its western and southern borders. The South American Plate is bordered by the Nazca Plate to the west and the African Plate to the east. In summary, the lithospheric plate that has a continent which has no mainland active volcanoes is the Eurasian Plate.
For more such questions on The lithospheric, click on:
https://brainly.com/question/24689273
#SPJ8
Scale is 1cm=70kilometers Northwest Territories is 1,346,106 total area
The land area of Northwest Territories on the map has been calculated to be 241.5 cm-. Use the scale in b) to
verify the land area of Northwest Territories on the table. Explain why there is a small discrepancy between
the two values.
The verified land area of Northwest Territories on the table is 16,905 kilometers², which is smaller than the total area of 1,346,106 kilometers² because the total area includes water bodies.
The land area of Northwest Territories on the map is calculated to be 241.5 cm². Using the given scale of 1cm = 70 kilometers, we can verify the land area of Northwest Territories on the table.
To do this, we need to convert the area on the map to kilometers. We can do this by multiplying the area on the map (241.5 cm²) by the conversion factor (1cm = 70 kilometers).
241.5 cm² * 70 kilometers/cm = 16,905 kilometers²
The verified land area of Northwest Territories on the table is 16,905 kilometers².
There is a small discrepancy between the calculated area (16,905 kilometers²) and the total area of Northwest Territories (1,346,106 kilometers²) due to the fact that the given measurement is only for the land area, whereas the total area includes water bodies like lakes and rivers.
Learn more about water bodies here:
https://brainly.com/question/30114604
#SPJ11
Following all instruction and guidelines for submitting a discussion post, complete the following discussion:
Rare Earth minerals/elements are now an important part of many of the items we rely on, including our phones, other electronics, batteries, and even renewable energy technologies such as wind turbines, and solar panels. How many rare earth minerals are you familiar with, where are they found, and what are they specifically used for? The list below includes some of the most commonly used rare Earth metals.
Select one and research, provide an informative post with as much information about your selected rare Earth mineral/element as you can find. What type of mine or process is used for your rare Earth metal?
Sign-in to "Layered Earth" and visit some of the mineral mines in Student Lessons: Unit C C1-2 through C1-4.
What are some of the minerals commonly mined around the globe?
After visiting some of the mines and reviewing the materials in "Layered Earth" provide a brief summary on one of the topics found in "Layered Earth" from Unit C: C1-2 - C1-4.
Did you learn something new?
Rare Earth Metal List:
Yttrium
Lanthanum
Cerium
Praseodymium
Neodymium
Samarium
Europium
Gadolinium
Terbium
Dysprosium
Holmium
Erbium
Thulium
Ytterbium
Lutetium
Solvent extraction is the method used nowadays to separate rare earths all over the world. Actually, many different metals and many various materials are refined in this manner utilizing solvent extraction. The most mined minerals in the world are coal, iron, and bauxite.
One of the current extraction methods is solvent extraction, which is the removal of a solute component form a solid using a liquid solvent. It's sometimes referred to as leaching or solid-liquid extraction. The seed oil is extracted using organic and aqueous solvents at high pressures and temperatures using this process. Particle size, solvent type, or temperature are all factors that influence oil extraction.
Learn more about coal, here:
https://brainly.com/question/12981477
#SPJ4
Rocks that are shaped like a mushroom are formed by which type of erosion? wind and chemicals sand and chemicals wind and sand wind and water water and ice
The rocks that are shaped like a mushroom are formed by wind and sand erosion. Wind erosion is caused by the movement of air and is a very important form of erosion in arid and semi-arid areas, such as deserts. It can lead to the formation of unique landforms, including the mushroom-shaped rocks mentioned in the question.
These rock formations are called hoodoos, and they are typically found in desert environments where there are strong winds and a lack of vegetation to hold the soil in place. Wind erosion occurs when soil and rock particles are lifted into the air by the wind and carried away. Over time, this can create deep gullies and valleys, as well as sculpting rock formations into unique shapes.
Wind erosion is often most severe during dust storms, which can cause damage to crops, buildings, and infrastructure, as well as impacting air quality and human health. Sand erosion is a specific type of wind erosion that occurs when sand particles are lifted into the air and carried away. This can create sand dunes and other distinctive landforms, including mushroom rocks.
To know more about hoodoos visit:
https://brainly.com/question/32814035
#SPJ11
decreasing the pressure on hot rock generates most magma.
Decreasing the pressure on hot rock generates most magma. This is due to the reduction in pressure that allows the rock to expand and melt at lower temperatures. This process is called decompression melting.
When the pressure is reduced, the boiling point of the magma is lowered, allowing it to rise to the surface and form a volcanic eruption. This is the same process that occurs in the mantle, where decompression melting forms magma that rises to the surface and creates new oceanic crust. The formation of magma is influenced by various factors including the temperature of the rock, the amount of water present, and the composition of the rock.
However, decreasing the pressure on hot rock is one of the primary ways that magma is generated. The amount of magma that is generated can also vary depending on the depth of the magma chamber and the rate at which the magma is being produced. In summary, decreasing the pressure on hot rock is a crucial factor in the generation of magma, and it plays a significant role in the formation of volcanoes and the creation of new crust.
To know more about decompression melting visit:
https://brainly.com/question/15873508
#SPJ11
Explain the difference between stratospheric Ozone (O 3
) and ground level Ozone
Stratospheric ozone and ground-level ozone are two different forms of ozone that exist in different parts of the Earth's atmosphere.
1. Stratospheric ozone: Stratospheric ozone, also known as the ozone layer, is located in the stratosphere, which is the layer of the Earth's atmosphere above the troposphere. It is formed by the interaction of ultraviolet (UV) radiation from the sun with oxygen molecules. Here are a few key points about stratospheric ozone:
- Stratospheric ozone plays a crucial role in protecting life on Earth by absorbing and blocking most of the sun's harmful UV radiation.
- It acts as a shield, preventing the majority of UV-B and UV-C rays from reaching the Earth's surface, which can cause skin cancer, eye damage, and harm to plants and marine ecosystems.
- The highest concentration of stratospheric ozone is found between 10 to 50 kilometers above the Earth's surface.
- Ozone depletion in the stratosphere has been a concern due to the release of certain chemicals, such as chlorofluorocarbons (CFCs), which can break down ozone molecules.
2. Ground-level ozone: Ground-level ozone is formed when sunlight reacts with pollutants emitted by human activities, such as vehicle emissions, industrial processes, and the evaporation of solvents.
Here are a few key points about ground-level ozone:
- Ground-level ozone is considered a pollutant and a harmful component of smog.
- It is found near the Earth's surface, primarily in the troposphere, which is the lowest layer of the atmosphere.
- Ground-level ozone is not directly emitted into the atmosphere but is formed when nitrogen oxides (NOx) and volatile organic compounds (VOCs) react in the presence of sunlight.
- It can have detrimental effects on human health, particularly for people with respiratory conditions, and can also damage crops, vegetation, and ecosystems.
- Unlike stratospheric ozone, ground-level ozone is not beneficial and is regulated as a pollutant by environmental agencies.
In summary, stratospheric ozone is a protective layer that blocks harmful UV radiation, while ground-level ozone is a pollutant formed through the interaction of sunlight with certain pollutants emitted by human activities. Understanding the differences between these two forms of ozone is crucial in addressing environmental concerns and promoting air quality.
To know more about ozone, visit:
https://brainly.com/question/27911475
#SPJ11
If an attribute table for a layer on your map has 10 columns, and only 3 rows, which of the following statements is true? The area of the pixel on the map will be 30 m
2
There will be 10 features on the map There will be 3 features on the map The layer will not display correctly Question 14 (Mandatory) (1 point) An attribute join allows us to: Join the coordinate system of the data frame to the attributes of a table Limit the number of features from a layer that will display on our map Join a shapefile or feature class to another based on its location Join a table to a shapefile or feature class based on a shared attribute.
Previous question
If an attribute table for a layer on your map has 10 columns and only 3 rows, the statement that is true is "There will be 3 features on the map."
In this context, a feature refers to a specific geographic entity, such as a point, line, or polygon.
Each row in the attribute table represents a feature, and since there are only 3 rows, there will be 3 features on the map.
The attribute table provides additional information about each feature. Each column in the attribute table represents a different attribute or characteristic of the features.
In this case, there are 10 columns, meaning there are 10 different attributes associated with each of the 3 features.
A pixel, on the other hand, refers to the smallest unit of measurement on a digital map. The area of a pixel is typically determined by the scale and resolution of the map.
However, the number of columns and rows in an attribute table does not directly affect the area of a pixel on the map. So, the statement "The area of the pixel on the map will be 30 m^2" is not true in this context.
To summarize, when an attribute table for a layer on a map has 10 columns and only 3 rows, there will be 3 features on the map. The number of columns and rows in the attribute table does not impact the area of a pixel on the map.
To know more about geographic entity, visit:
https://brainly.com/question/30858772
#SPJ11
The Soviet Union's role in WWII can best be described by which of the following statements?
A) The Soviet Union took a leading role in defeating Nazi Germany.
B) The Soviet Union took a backseat role in supporting Britain and the United States.
C) The Soviet Union took a neutral role.
D) Soviet aid allowed Germany to last much longer than it would have otherwise.
The Soviet Union's role in WWII can best be described by the fact that they took a leading role in defeating Nazi Germany. Hence, Option (A) is correct.
The Soviet Union's military efforts were significant, as they bore the brunt of the fighting on the Eastern Front.
They successfully defended key cities like Stalingrad and Moscow, inflicting heavy losses on the German forces.
The Soviet Union's massive army, combined with its determination and resilience, played a vital role in turning the tide of the war against Germany.
Additionally, the Soviet Union provided substantial material support to the Allies, supplying tanks, aircraft, and resources that contributed to the overall defeat of the Axis powers.
Thus, the Soviet Union's pivotal role in the defeat of Nazi Germany during World War II.
Learn more about the Soviet Union here:
https://brainly.com/question/12774978
#SPJ4
