The object traveled a horizontal distance of 240 meters from its original position in the x-direction.
In parabolic motion, the horizontal and vertical motions are independent of each other. The horizontal component of the velocity remains constant throughout the motion.
Given:
Time of flight (time taken to reach the ground) = 20 seconds
Horizontal component of velocity = 12 m/s
To find the horizontal distance traveled (Δx), we can use the formula:
Δx = (horizontal velocity) * (time of flight)
Δx = 12 m/s * 20 s
Δx = 240 meters.
To know more about parabolic motion
brainly.com/question/30247276
#SPJ11
b. Evaluate the field strength if \( L=10 \mathrm{~cm} \) and \( Q=30 \mathrm{nC} \). expression for the electric field \( \vec{E} \) at point \( P \). Give your answer in component form. Figure P23.4
if \( L=10 \mathrm{~cm} \) and \( Q=30 \mathrm{nC}, the magnitude of the electric field at point P is approximately 2.698 × 10⁵ N/C.
The electric field at point P, denoted as E, can be calculated using the formula:
E = (1 / (4πε₀)) * (Q / r²) * R
where E₀ is the permittivity of free space, Q is the charge, r is the distance from the charge to point P, and R is the unit vector pointing from the charge to point P.
Given:
Distance from the charge to point P, L = 10 cm = 0.1 m
Charge, Q = 30 nC = 30 × [tex]10^-^9[/tex] C
First, let's calculate the denominator:
r² = (0.1 m)² = 0.01 m²
Next, let's determine the value of E₀, which is the permittivity of free space. The value of E₀ is approximately [tex]8.854 * 10^-^1^2[/tex] C²/N·m².
Now, let's substitute the values into the formula:
[E] = (1 / (4π([tex]8.854 * 10^-^1^2[/tex])) * (30 × [tex]10^-^9[/tex] / 0.01)
Simplifying further:
[E] = (1 / (4π([tex]8.854 * 10^-^1^2[/tex]))) * (3 × [tex]10^-^7[/tex]/ 0.01)
[E] ≈ 2.698 × 10⁵ N/C
Therefore, the magnitude of the electric field at point P is approximately 2.698 × 10⁵ N/C.
To express the electric field in component form, we can multiply the magnitude by the unit vector in the direction from the charge to point P. The unit vector R only has a non-zero component in the x-direction, so the electric field in component form is:
E = (Eₓ, 0, 0)
where Eₓ is the magnitude of the electric field and indicating its magnitude in the x-direction and zero magnitudes in the y and z directions.
Learn more about electric field here:
https://brainly.com/question/30544719
#SPJ11
What was the average speed in km/h of a car that travels 53.1 km in 28.3 min?
v =
km
h
The average speed of a car can be calculated by dividing the distance traveled by the time taken. In this case, the car travels a distance of 53.1 km in a time of 28.3 minutes.
To find the average speed in km/h, we need to convert the time from minutes to hours since the distance is given in kilometers.
There are 60 minutes in an hour, so to convert 28.3 minutes to hours, we divide it by 60:
28.3 minutes ÷ 60 = 0.4717 hours (rounded to four decimal places)
Now, we can calculate the average speed by dividing the distance by the time:
Average speed = distance ÷ time
Average speed = 53.1 km ÷ 0.4717 hours = 112.618 km/h (rounded to three decimal places)
Therefore, the average speed of the car is approximately 112.618 km/h.
To know more about average visit:
https://brainly.com/question/24057012
#SPJ11
) A circular aperture of radius 2.44×10
−5
m is illuminated with light of wavelength 500 nm. At what angle is the first diffraction minimum (in degree)? A) 1.75
∘
B) 0.025
∘
C) 0.031
∘
D) 1.43
∘
E) 1.17
∘
angle of diffraction for the first diffraction minimum is `1.17°`.
According to the theory of diffraction, when a wave passes through a small opening (or aperture), it diffracts and emerges as a set of circular waves that interfere with one another to produce a diffraction pattern. The angle of diffraction is the angle between the incident wave and the diffracted wave, measured from the normal.
Given that a circular aperture of radius r = 2.44 × 10⁻⁵ m is illuminated with light of wavelength λ = 500 nm, we have to find the angle of diffraction for the first diffraction minimum.
To find the angle of diffraction θ for the first minimum, we can use the formula:
a sin θ = m λ`
where, `a` is the radius of the circular aperture,
`θ` is the angle of diffraction,
`m` is the order of diffraction, and
`λ` is the wavelength of light.
Since we are interested in the first minimum, `m = 1`.Substituting the given values in the above equation, we get:`2.44 × 10⁻⁵ sin θ = λ`On rearranging, we get:`sin θ = λ / (2.44 × 10⁻⁵)
Evaluating this, we get: sin θ = 0.02049`
Taking inverse sine of both sides, we get:
`θ = sin⁻¹ (0.02049)`
Evaluating this, we get: `θ = 1.175°`
Therefore, the angle of diffraction for the first diffraction minimum is `1.175°`.
Therefore, the answer is E) `1.17°`.
Learn more about angle of diffraction calculation here:
https://brainly.com/question/33353221
#SPJ11
How much potential energy (in Joules) is associated with assembling a 2.0×10
−9
C charge and a 1.0C charge exactly one meter apart? k=1/4π0
−
8.99×10
∘
N m
2
/C
−2
Two significant digits please
The potential energy associated with assembling a 2.0 x 10^(-9) C charge and a 1.0 C charge exactly one meter apart is approximately 18 Joules.
To calculate the potential energy associated with assembling two charges, we can use the formula:
U = (k * |q1 * q2|) / r
where:
U is the potential energy,
k is the electrostatic constant (k = 1 / (4 * π * ε₀), where ε₀ is the vacuum permittivity with a value of approximately 8.99 x 10^9 N m^2/C^2),
|q1| and |q2| are the magnitudes of the charges, and
r is the distance between the charges.
|q1| = 2.0 x 10^(-9) C
|q2| = 1.0 C
r = 1 m
k = 1 / (4 * π * ε₀) ≈ 9.0 x 10^9 N m^2/C^2
Substituting the values into the formula:
U = (k * |q1 * q2|) / r
= (9.0 x 10^9 N m^2/C^2) * (|2.0 x 10^(-9) C * 1.0 C|) / 1 m
Calculating the expression:
U ≈ 18 J
Therefore, the potential energy associated with assembling a 2.0 x 10^(-9) C charge and a 1.0 C charge exactly one meter apart is approximately 18 Joules.
Learn more about potential energy https://brainly.com/question/26978411
#SPJ11
Charge q
2
in (Figure 1) is in equilibrium. Assume Part A q=5.4nC. What is q
1
? Express your answer with the appropriate units.
Answer: q1 = 5.2734375 × 10⁻¹⁰ C
Given:
Charge q2 in (Figure 1) is in equilibrium.
Part A q=5.4nC.
We need to find the value of q1.
Since the system is in equilibrium, the net force acting on the charges is zero.
Hence, we can use Coulomb's Law to relate q1 and q2:
F1 = F2F1 = kq1q2/r1² ;
F2 = kq1q2/r2²
Now, since the charges are in equilibrium:
F1 + F2 = 0
(i.e.) kq1q2(1/r1² - 1/r2²) = 0r1
= 2.50 cm ;
r2 = 8.00 cm
=> r1² = 6.25 cm²; r2² = 64 cm²
Thus, we can calculate q1: 5.4 × 10⁻⁹ × q2/ (64 cm²/6.25 cm²)
= q2 × 0.09765625 q2 gets canceled on both sides,
hence q1 = 5.4 × 10⁻⁹ × 0.09765625
= 5.2734375 × 10⁻¹⁰ C
Answer: q1 = 5.2734375 × 10⁻¹⁰ C
Learn more about Coulomb's Law on the given link:
https://brainly.in/question/16201763
#SPJ11
A person whose weight is \( 512 \mathrm{~N} \) is being pulled up vertically by a rope from the bottom of a cave that is \( 35.5 \mathrm{~m} \) deep. The maximum tension that the rope can withstand wi
The maximum tension that the rope can withstand without breaking is [683 N].
To determine the maximum tension the rope can withstand, we need to consider the forces acting on the person. The weight of the person is acting downwards and can be calculated using the formula: weight = mass × acceleration due to gravity. In this case, we are given the weight of the person, which is 512 N.
Next, we need to consider the tension in the rope. As the person is being pulled up vertically, the tension in the rope will be equal to the weight of the person plus the force required to overcome any additional resistance or friction.
In this scenario, the person is being pulled up from the bottom of a cave that is 35.5 m deep. As the person moves up, the tension in the rope needs to counteract the gravitational force pulling them downwards. At the maximum tension, the weight of the person will be equal to the tension in the rope.
Therefore, the maximum tension that the rope can withstand without breaking is 512 N.
Learn more about tension from the given link https://brainly.com/question/10169286
#SPJ11
You have landed on an unknown planet, Newtonia, and want to know what objects will weigh there. You find that when a certain tool is pushed on a frictionless horizontal surface by a $12.4 \mathrm{~N}$ force, it moves $16.4 \mathrm{~m}$ in the first $2.00 \mathrm{~s}$, starting from rest. You next observe that if you release this tool from rest at $11.0 \mathrm{~m}$ above the ground, it takes $2.88 \mathrm{~s}$ to reach the ground.
A)What does the tool weigh on Newtonia?
B)What would it weigh on Earth?
The weight of the object on Newtonia is 12.4 N.
The tool weighs 12.4 N on Newtonia.
Given:
Force on horizontal surface, F = 12.4 N
Distance covered, s = 16.4 m
Time taken, t = 2.00 s
Height from which the object was released = 11.0 m
Time taken to reach the ground, t = 2.88 s
Here, we are given that the surface is frictionless, so there is no work done against friction. Hence, the kinetic energy of the object is converted into potential energy due to the gravity of the planet.
The weight of an object is defined as the force with which the planet pulls the object downwards. The formula to calculate the weight is given as:
Weight = mg
where, m = mass of the object
g = acceleration due to gravity
On Newtonia, the weight of an object will be given as:
Weight = mass of the object × acceleration due to gravity of Newtonia
Since we don't know the acceleration due to gravity of Newtonia, let's assume it to be g_N. Now, applying the first equation of motion, we get:
v = u + at
where, u = initial velocity = 0
a = acceleration
t = 2.00 s
v = ?
We have:
s = ut + (1/2)at²
⇒ a = (2s)/(t²) = (2 × 16.4)/(2.00²) = 16.4 m/s
The force applied on the object on Newtonia is the resultant force and is given as:
Resultant force = ma
where m is the mass of the object. Let's assume the mass of the object to be m_N on Newtonia, then, the force acting on it will be F. Hence, we get:
F = m_N × g_N --- (1)
F = m_N × a --- (2)
On dividing equation (1) by equation (2), we get:
(g_N/a) = (F/m_N)
⇒ g_N = (F/m_N)
Substituting the values of F and g_N in equation (1), we get:
12.4 = m_N × (F/m_N)
⇒ F = 12.4 N
So, the weight of the object on Newtonia is 12.4 N.
Mass of the object, m_N = (F/g_N) = (12.4/7.18)
Now, we need to calculate g_N. To calculate g_N, let's use the second observation of the tool falling freely from a height of 11 m. The time taken to fall from a height of 11 m is given as t = 2.88 s.
The formula to calculate the distance travelled by a freely falling object is given as:
s = (1/2)gt
Substituting the given values, we get:
11 = (1/2)g_N × (2.88)²
⇒ g_N = (2 × 11)/(2.88²)
⇒ g_N = 7.18 m/s²
Substituting this value of g_N in the expression of m_N, we get:
m_N = (12.4/7.18) = 1.73 kg
So, the weight of the object on Earth is given as:
Weight = mg
where, m = mass of the object
g = acceleration due to gravity on Earth
g = 9.8 m/s²
Weight = m × g = 1.73 × 9.8 = 16.97 N
Therefore, the tool weighs 12.4 N on Newtonia.
Learn more about Newtonia on
https://brainly.com/question/14748661
#SPJ11
(Figure 1) shows a liquid-detecting prism device that might be used inside a washing machine. If no liquid covers the prism's base, total internal reflection of the beam from the light source produces a large signal in the light sensor. If liquid covers the base, some light escapes from the prism into the liquid and the light sensor's signal decreases. Thus a large signal from the light sensor indicates the absence of liquid in the reservoir. Suppose that the liquid is water (nwater = 1.33), and that θ = 39.0 ∘∘.
A) Determine the minimum allowable index of refraction nmin (3 sigfigs)
B) Determine the max allowable index of refraction nmax (3 sigfigs)
The minimum allowable index of refraction is 2.12 (approx), and the maximum allowable index of refraction is 1.33 (3 sigfigs).
In this problem, the refractive index of the water is known (n water = 1.33) and the angle of incidence of light inside the prism is also given (θ = 39.0 ∘). We know that the minimum value of the refractive index is 1. If the liquid in the reservoir has a refractive index smaller than this, then the light ray inside the prism will escape into the liquid instead of undergoing total internal reflection. Thus, the liquid detection will fail. Now, to find the minimum allowable index of refraction, we can use the formula for critical angle as follows:
θc = sin⁻¹(n2/n1)
where, θc is the critical angle, n1 is the refractive index of the medium of incidence (air, in this case), and n2 is the refractive index of the medium of refraction (water, in this case).On rearranging the above equation, we get:
n2 = n1 sin(θc)
For total internal reflection, θ = θc.
So, substituting the given values, we get:
n water = n1 sin(θ) ⇒ n1 = nwater / sin(θ)⇒ n1 = 1.33 / sin(39.0∘)⇒ n1 = 2.12
(approx) Therefore, the minimum allowable index of refraction is nmin = 2.12 (approx).
To find the maximum allowable index of refraction, we need to consider the case when θ = 90∘, so that the critical angle is 90∘ and the light undergoes total internal reflection at the prism boundary.Using the same formula, we get:
n water = n1 sin(θc)⇒ nmax = nwater / sin(90∘) = nwater / 1 = nwaterThus,
the maximum allowable index of refraction is nmax = 1.33 (3 sigfigs).
For more question refraction
https://brainly.com/question/27932095
#SPJ8
Solve the problem. The number of dislocated olectric impulses per cubic inch in a transformer increases when lightning stnkes by \( \mathrm{D}=1100(4) \times \), where \( \times \) is the time in mill
At x = 0, there are no dislocated impulses, while at x = 3, there are 13,200 dislocated impulses.
The problem states that the number of dislocated electric impulses per cubic inch in a transformer increases when lightning strikes by D = 1100(4)×,
where × represents the time in milliseconds of the lightning strike.
We need to find the number of dislocated impulses at x = 0 and x = 3.
To find the number of dislocated impulses at x = 0, substitute x = 0 into the equation D = 1100(4)×:
D(0) = 1100(4)(0)
D(0) = 0
So, at x = 0, there are no dislocated impulses.
To find the number of dislocated impulses at x = 3, substitute x = 3 into the equation:
D(3) = 1100(4)(3)
D(3) = 13200
Therefore, at x = 3, there are 13,200 dislocated impulses.
Learn more about impulses here:
https://brainly.com/question/29297755
#SPJ11
Solve the problem. The number of dislocated electric impulses per cubic inch in a transformer increases when lightning strikes by D=1100(4)×, where × is the time in milliseconds of the lightning strike. Find the number of dislocated impulses at x=0 and x=3
"Two hockey players strike a puck of mass 0.160 kg with their
sticks simultaneously, exerting forces of
1.18 103 N, directed west, and
9.60 102 N, directed 30.0° east of north.
Find the instantaneou"
The instantaneously velocity and direction of the puck can be calculated by the use of the net force acting on it. So, to find the instantaneous velocity and direction of the puck:
We know that,m = 0.160 kg
F1 = 1.18 × 103 N, directed west
F2 = 9.60 × 102 N, directed 30.0° east of north
At the time when both players hit the puck, the direction of the puck's velocity will be directed in the direction of the net force acting on it. We know that,net force = F1 + F2We can find the net force by adding the given forces:net force
= F1 + F2
net force = (1.18 × 103 N) west + (9.60 × 102 N) 30.0° east of north
We can convert the second force vector to its components in the west and north direction:
F2 = (9.60 × 102 N) cos 30.0° west + (9.60 × 102 N) sin 30.0° north
F2 = 8.32 × 102 N west + 4.80 × 102 N north
Therefore,net force = (1.18 × 103 N) west + (8.32 × 102 N) west + (4.80 × 102 N) north
net force = (1.18 × 103 N + 8.32 × 102 N) west + (4.80 × 102 N) north
net force = (2.01 × 103 N) west + (4.80 × 102 N) north
We can find the direction of net force by calculating the angle it makes with the north direction:tan θ = (2.01 × 103 N) / (4.80 × 102 N)θ
= tan-1 (2.01 × 103 N) / (4.80 × 102 N)θ
= 76.4° north of west
The magnitude of the net force can be found by taking its square root:|net force| = √[(2.01 × 103 N)2 + (4.80 × 102 N)2]|net force| = 2.08 × 103 N
Therefore, the instantaneous velocity of the puck will be:
velocity = (net force) / massvelocity = (2.08 × 103 N) / (0.160 kg)velocity
= 13.0 m/s north of west, which is the direction of the net force acting on the puck.
Answer: The instantaneous velocity of the puck will be 13.0 m/s north of west, which is the direction of the net force acting on the puck.
To know more about net force visit:
https://brainly.com/question/18109210
#SPJ11
A point charge with charge q1 = 2.20 μC is held stationary at the origin. A second point charge with charge q2 = -4.60 μC moves from the point (0.135 mm , 0) to the point (0.230 mm , 0.280 mm ). How much work is done by the electrostatic force on the moving point charge? Express your answer in joules
Work done by the electrostatic force on the moving point charge is 1.12870 * 10^(-3) J.
In order to calculate the work done by the electrostatic force on the moving point charge, we can use the formula:
Work = Force x Distance
The electrostatic force is an attractive as well as repulsive force generated by or existing between the electrically charge particles or objects at rest. It is also known as Coulomb's force. The Coulomb attraction would be named after Charles-Augustin de Coulomb, a French scientist. Coulomb's law describes the strength of the electrostatic force (attraction or repulsion) between two charged objects. The electrostatic force is equal to the charge of object 1 times the charge of object 2, divided by the distance between the objects squared, all times the Coulomb constant (k).
The electrostatic force between two point charges is given by Coulomb's Law as:
F = (k * |q1 * q2|) / r^2
Where:
- F is the electrostatic force
- k is the Coulomb's constant (k = 8.99 x 10^9 Nm^2/C^2)
- q1 and q2 are the charges of the two point charges
- r is the distance between the two point charges
In this problem, q1 = 2.20 μC and q2 = -4.60 μC. The distance between the two points is given as the displacement from (0.135 mm, 0) to (0.230 mm, 0.280 mm).
First, let us calculate the distance:
Δx = (0.230 mm - 0.135 mm) = 0.095 mm
Δy = (0.280 mm - 0) = 0.280 mm
Using the Pythagorean theorem, we can find the displacement:
Δr = sqrt(Δx^2 + Δy^2)
or, Δr = 0.2956771 mm = 0.0002956771 m
Now we can calculate the work done by the electrostatic force:
Work = F * Δr
Substituting the values into the formulas:
Workinitial = [(k * |q1 * q2|) / sqrt(0.000135)] * Δr
= [(8.99 x 10^9 * |2.20 * 10^(-6) * -4.60 * 10^(-6)|) / 0.0116] * 0.0002956771
= 2.31899 * 10^(-3) J
Workfinal = [(k * |q1 * q2|) / sqrt(0.000515)] * Δr
= [(8.99 x 10^9 * |2.20 * 10^(-6) * -4.60 * 10^(-6)|) / 0.0226] * 0.0002956771
= 1.19028 * 10^(-3) J
Worknet = Workfinal - Workinitial
= 2.31899 * 10^(-3) J - 1.19028 * 10^(-3) J
= 1.12870 * 10^(-3) J
It is pivotal to remember to convert all measurements to SI units (meters) before plugging them into the equation.
Hence, work done by the electrostatic force on the moving point charge is 1.12870 * 10^(-3) J.
Learn more about electrostatic force: https://brainly.com/question/30849103
#SPJ11
An Earth satellite moves in a circular orbit 812 km above Earth's surface with a period of 100.9 min. What are (a) the speed and (b) the magnitude of the centripetal acceleration of the satellite?
The speed of the satellite is 7,537.57 m/s, and the magnitude of the Centripetal acceleration is 7.95 m/s².
determine the speed and magnitude of the centripetal acceleration of a satellite in a circular orbit, we can use the following equations:
(a) The speed of the satellite is given by
v = (2πr) / T
where v is the speed, r is the radius of the orbit, and T is the period of the orbit.
(b) The magnitude of the centripetal acceleration is given by
ac = [tex]v^2[/tex]/ r
where ac is the centripetal acceleration.
Calculate these values using the given information:
(a) Speed of the satellite
The radius of the orbit (r) is the sum of the Earth's radius and the altitude of the satellite above the Earth's surface. Since the altitude is given as 812 km, we need to convert it to meters:
altitude = 812 km = 812,000 m
The radius of the orbit:
r = Earth's radius + altitude
= 6,371 km + 812 km
= 7,183 km = 7,183,000 m
calculate the speed (v):
v = (2πr) / T
= (2π * 7,183,000) / (100.9 min * 60 s/min)
≈ 7,537.57 m/s
The speed of the satellite is 7,537.57 m/s.
(b) Magnitude of the centripetal acceleration:
The centripetal acceleration can be calculated using the formula:
ac = [tex]v^2[/tex] / r
Plugging in the values:
ac =[tex](7,537.57)^2[/tex] / 7,183,000
≈ 7.95 m/s²
The magnitude of the centripetal acceleration of the satellite is 7.95 m/s².
To know more about Centripetal acceleration refer here
https://brainly.com/question/17123770#
#SPJ11
While riding on an elevator descending with a constant speed of 3.3 m/s, you accidentally drop a book from under your arm.
(a) How long does it take for the book to reach the elevator floor, 1.4 m below your arm?
(b) What is the book's speed relative to you when it hits the elevator floor?
Time taken for the book to reach the elevator floor is 0.533 sec
The speed of the book relative to you when it hits the elevator floor is 3.3 m/s.
(a) To calculate the time it takes for the book to reach the elevator floor, we can use the equation of motion for vertical motion:
y = v_iy * t + (1/2) * g * t^2
where:
y is the vertical displacement (1.4 m),
v_iy is the initial vertical velocity (0 m/s since the book was initially at rest),
g is the acceleration due to gravity (-9.8 m/s^2),
t is the time we want to calculate.
We can rearrange the equation to solve for t:
t = (-v_iy ± sqrt(v_iy^2 - 2 * g * y)) / g
Since the book is dropped and has an initial velocity of 0 m/s, the equation simplifies to:
t = sqrt(2 * y / g)
t = [tex]\sqrt{2*1.4/9.8}[/tex]
t = [tex]\sqrt{0.285}[/tex] sec
t = 0.533 sec
So time taken for the book to reach the elevator floor is 0.533 sec
(b) The speed of the book relative to you when it hits the elevator floor is the same as its velocity just before hitting the floor. Since the elevator is descending with a constant speed of 3.3 m/s, the book will also have a downward velocity of 3.3 m/s relative to the elevator.
Therefore, the speed of the book relative to you when it hits the elevator floor is 3.3 m/s.
To know more about velocity, visit:
https://brainly.com/question/24259848
#SPJ11
Two identical point sources are 4.5 cm apart, in phase and vibrating at a frequency of 10 Hz. They produce an interference pattern. At the point of the first nodal line 4.5 cm from one source and 5.0 cm from the other. a) Determine the wavelength. b) Determine the speed of the waves.
the speed of the waves is 1.9 m/s.
To determine the wavelength and speed of the waves in the given scenario, we can use the concept of interference and nodal lines.
a) Determining the Wavelength:
The distance between two consecutive nodal lines in an interference pattern corresponds to half the wavelength (λ/2). In this case, the distance between the first nodal line and the second nodal line (which is 4.5 cm from one source and 5.0 cm from the other) is equal to half the wavelength.
Distance between nodal lines = λ/2
4.5 cm + 5.0 cm = λ/2
9.5 cm = λ/2
Solving for the wavelength (λ), we multiply both sides of the equation by 2:
λ = 2 × 9.5 cm
λ = 19.0 cm
Therefore, the wavelength of the waves is 19.0 cm.
b) Determining the Speed of the Waves:
The speed of a wave can be calculated using the formula:
v = f × λ
Where:
v is the speed of the wave
f is the frequency of the wave
λ is the wavelength of the wave
Given:
Frequency (f) = 10 Hz
Wavelength (λ) = 19.0 cm
Converting the wavelength to meters:
1 cm = 0.01 m
19.0 cm = 19.0 × 0.01 m = 0.19 m
Using the formula above, we can calculate the speed of the waves:
v = 10 Hz × 0.19 m
v = 1.9 m/s
to know more about wave visit:
brainly.com/question/23133752
#SPJ11
water boils at a lower temperature at higher altitudes because
Water boils at a lower temperature at higher altitudes because the boiling point of water is directly proportional to atmospheric pressure, which decreases as altitude increases.
The boiling point of water at standard atmospheric pressure is 100°C or 212°F. However, at altitudes above sea level, the atmospheric pressure is lower than at sea level, meaning water boils at a lower temperature, specifically at around 150°C.
This means that food that needs to be cooked at a certain temperature will take longer to cook at higher altitudes because the water boils at a lower temperature and takes longer to reach the desired cooking temperature. Additionally, water will also evaporate faster at higher altitudes, leading to faster dehydration of food while cooking.
learn more about temperature on
https://brainly.com/question/27944554
#SPJ11
The stick man has a mass of \( 90 \mathrm{~kg} \). Assume that the co-efficient of friction is the same between the box and the ground as it is between the stick man's shoe and the ground. Use Newton'
The analysis of forces acting on the stick man using Newton's second law, which states that the acceleration of an object is directly proportional to the net force applied to it and inversely proportional to its mass.
The given scenario involves a stick man with a mass of 90 kg and a coefficient of friction between the stick man's shoe and the ground. We need to determine whether the stick man moves or not using Newton's second law and draw a free body diagram.
Newton's second law states that the acceleration of an object is directly proportional to the net force applied to it and inversely proportional to its mass. It can be expressed as
F = ma
Where, F is the net force, m is the mass, and a is the acceleration. To analyse the scenario, let's draw a free body diagram. We'll consider the forces acting on the stick man: the weight force (mg) acting downwards and the ground reaction force (R) acting upwards.
Now, let's calculate the ground reaction force. Since the stick man is not moving vertically, the ground reaction force must be equal to the weight force. The weight force can be calculated using the formula:
weight = mass × acceleration due to gravity (g).
Concluding statement:
The ground reaction force is equal to the weight force, which is calculated by multiplying the mass of the stick man (90 kg) by the acceleration due to gravity (9.8 m/s^2).
The stick man will not move vertically since the ground reaction force balances the weight force. Regarding the example given in Part i, it does not correspond to any of the options provided.
The example describes the Newton's second rule, which states that an object's acceleration is inversely proportional to its mass and directly proportional to the net force acting on it, to analyse the forces operating on the stick man.
To learn more about Newton's second law from the given link.
https://brainly.com/question/25545050
#SPJ11
Complete question is,
The stick man has a mass of 90 kg. Assume that the co-efficient of friction is the same between the box and the ground as it is between the stick man's shoe and the ground. Use Newton's second law to find if the person moves or not. Draw a free body diagram. Write a concluding statement for what is happening. What is the ground reaction force? j. Part i. is an example of: i. Newton's First Law of Motion ii. Newton's Second Law of Motion iii. Newton's Third Law of Motion
A battery is used in a physics lab to supply current to a circuit. A voltmeter connected in parallel across the cell reads 5.42 V in an open circuit (figure a) and 4.83 V in a closed circuit (figure b) when the cell supplies 2.1 A to the circuit. How much electrical power does the cell produce (in Watts)? Your answer should be a number with three decimal places, do not include the unit.
To determine the electrical power produced by the cell, we can use the formula: Power = Voltage * Current. The cell produces approximately 1.239 Watts of electrical power.
Given:
Voltage in the open circuit (V_open) = 5.42 V
Voltage in the closed circuit (V_closed) = 4.83 V
Current (I) = 2.1 A
In the open circuit, the voltmeter reading represents the electromotive force (emf) of the battery, which is the maximum voltage it can supply. Therefore, the emf is 5.42 V.
In the closed circuit, the voltmeter reading (V_closed) represents the voltage across the internal resistance of the battery. To find the potential difference across the external load resistor, we subtract this voltage from the emf:
V_external = emf - V_closed = 5.42 V - 4.83 V = 0.59 V
Now, we can calculate the electrical power produced by the cell:
Power = V_external * I = 0.59 V * 2.1 A
Power ≈ 1.239 W
Therefore, the cell produces approximately 1.239 Watts of electrical power.
To learn more about, electrical power, click here, https://brainly.com/question/29869646
#SPJ11
An airplane in level flight travels horizontally with a constant eastward acceleration of 7.80 m/s
2
and a constant northward acceleration of −23.0 m/s
2
. The airplane's initial velocity has eastward and northward components of 80.5 m/s and −18.0 m/s, respectively. Determine the magnitude of the airplane's displacement from its initial position after 17.5 s. m
The magnitude of the airplane's displacement from its initial position after 17.5 seconds is 2440.33 meters.
The given data includes the initial velocity components of 80.5 m/s eastward and -18.0 m/s northward, along with constant accelerations of 7.80 m/s² eastward and -23.0 m/s² northward. The time taken is 17.5 seconds.
To determine the magnitude of the airplane's displacement, we can use the kinematic equation: [tex]\(s = vt + \frac{1}{2}at^2\)[/tex], where s is the displacement, v is the initial velocity, a is the acceleration, and t is the time taken.
By substituting the given values into the kinematic equation, we find:
[tex]\[s = (80.5 \, \text{m/s})(17.5 \, \text{s}) + \frac{1}{2}(7.80 \, \text{m/s}^2)(17.5 \, \text{s})^2 + \frac{1}{2}(-23.0 \, \text{m/s}^2)(17.5 \, \text{s})^2 + (-18.0 \, \text{m/s})(17.5 \, \text{s})\][/tex]
Therefore, the displacement is calculated to be 2440.33 meters (rounded to two decimal places).
Hence, the magnitude of the airplane's displacement from its initial position after 17.5 seconds is 2440.33 meters.
Learn more about displacement
https://brainly.com/question/11934397
#SPJ11
Suppose an object of mass 1.93 kg is being pushed along a horizontal surface by a force 12 Newtons. A kinetic friction force of 1.7Newtons is acting on the object. Calculate the acceleration of the object in the horizontal direction. Express your result with two digits of precision. Your Answer: Answer Hide hint for Question 7 Draw a free body diagram. The acceleration is due to the net force.
An object of mass 1.93 kg is being pushed along a horizontal surface by a force 12 Newtons. A kinetic friction force of 1.7Newtons is acting on the object. The acceleration in the horizontal direction is 5.34 [tex]m/s^2[/tex].
To calculate the acceleration of the object, we need to consider the net force acting on it. Let's draw a free body diagram to visualize the forces involved. The diagram is available in the image below.
The applied force ([tex]F_{applied[/tex]) is pushing the object in the horizontal direction, while the kinetic friction force ([tex]F_{friction[/tex]) is acting in the opposite direction. The net force ([tex]F_{net[/tex]) is the vector sum of these forces.
Given:
Mass of the object (m) = 1.93 kg
Applied force ([tex]F_{applied[/tex]) = 12 N
Kinetic friction force ([tex]F_{friction[/tex]) = 1.7 N
To find the net force, we can subtract the friction force from the applied force:
[tex]F_{net[/tex] = [tex]F_{applied[/tex] - [tex]F_{friction[/tex]
= 12 N - 1.7 N
= 10.3 N
Now, we can apply Newton's Second Law, which states that the net force acting on an object is equal to the product of its mass and acceleration:
[tex]F_{net[/tex]= m * a
10.3 N = 1.93 kg * a
Solving for acceleration (a):
a = [tex]F_{net[/tex]/ m
= 10.3 N / 1.93 kg
≈ 5.34 [tex]m/s^2[/tex]
Therefore, the acceleration of the object in the horizontal direction is approximately 5.34 [tex]m/s^2[/tex].
Learn more about Newton's Second Law here:
https://brainly.com/question/32884029
#SPJ11
A ball is thrown upwards with an initial speed of 30 m/s. One second later, another ball is dropped from a building 10.0 m high. After how long will the balls be at the same height above the ground and what will the height be?
Both the balls will be at the same height above the ground after 1.43 s and the height will be 95.82 m.
For ball thrown upwards, u = 30 m/s (Initial velocity) a = -9.8 m/s² (Acceleration due to gravity) t = ? (Time taken) s = ? (Distance travelled)
Using the second equation of motion: s = ut + 1/2 * at²0 = 30t - 1/2 * 9.8 * t²0 = t(30 - 4.9t)
By solving this equation we will get t = 6.12 s
Now let's calculate the distance travelled by the ball in 6.12 s.
Using the first equation of motion: s = ut + 1/2 * at²
s = 30(6.12) - 1/2 * 9.8 * (6.12)²s = 95.82 m.
So, the first ball will reach a height of 95.82 m after 6.12 s.
For the second ball: u = 0 m/s (Initial velocity)a = -9.8 m/s² (Acceleration due to gravity)s = 10.0 m (Distance travelled)
Let's use the first equation of motion to find t:
s = ut + 1/2 * at²
10.0 = 0 * t + 1/2 * 9.8 * t²
t = √(2s/a)t = √(2 × 10/9.8)t = 1.43 s
So, the second ball will take approximately 1.43 s to fall 10.0 m.
Therefore, both the balls will be at the same height above the ground after 1.43 s and the height will be 95.82 m.
Learn more about height : https://brainly.com/question/12446886
#SPJ11
For the example above, how long (in nanoseconds) does it take the proton to travel the distance of 2.1 mm between the plates? (Hint: use one of the kinematics equations.) Type your numetic answer and submit
The time it takes for the proton to travel the distance between the plates, we can use the kinematic equation. The proton takes approximately 46.2 nanoseconds to travel the distance of 2.1 mm between the plates.
To calculate the time it takes for the proton to travel the distance between the plates, we can use the kinematic equation:
s = ut + (1/2)at²
where s is the distance, u is the initial velocity, t is the time, and a is the acceleration.
Given:
s = 2.1 mm = 2.1 × 10^-3 m (converting to meters)
u = 0 m/s (initial velocity of the proton, assuming it starts from rest)
a = 9.8 m/s² (acceleration due to gravity, assuming it's in free fall)
Substituting the values into the equation:
2.1 × 10^-3 = 0 × t + (1/2) × 9.8 × t²
Simplifying the equation:
4.9t² = 2.1 × 10^-3
Solving for t:
t² = (2.1 × 10^-3) / 4.9
t ≈ √(2.1 × 10^-3 / 4.9)
t ≈ 4.62 × 10^-5 seconds
Converting to nanoseconds:
t ≈ 4.62 × 10^-5 × 10^9 ns
t ≈ 46.2 ns
Therefore, it takes approximately 46.2 nanoseconds for the proton to travel the distance of 2.1 mm between the plates.
To know more about kinematic equation,
https://brainly.com/question/24458315
#SPJ11
Spinning space station Points:1 A proposed space station includes living quarters in a circular ring 62.0 m in diameter. At what angular speed should the ring rotate so the occupants feel 0.461g where g is the gravitational acceleration on the surface of the Earth?
The circular ring of the space station should rotate at an angular speed of approximately 0.377 radians per second for the occupants to experience a perceived acceleration of 0.461g. We can use the formula for centripetal acceleration.
To determine the required angular speed of the spinning space station, we can use the formula for centripetal acceleration:
a = ω² * r
where:
a is the centripetal acceleration (0.461g, or 0.461 times the acceleration due to gravity on Earth)
ω is the angular speed (in radians per second)
r is the radius of the circular ring (half the diameter, 31.0 m)
First, let's convert the acceleration due to gravity from g to meters per second squared (m/s²):
g = 9.8 m/s²
Now we can substitute the values into the formula:
0.461g = ω² * 31.0 m
Solving for ω², we divide both sides by 31.0 m:
0.461g / 31.0 m = ω²
Substituting the value of g:
(0.461 * 9.8 m/s²) / 31.0 m = ω²
Simplifying the expression:
0.142m/s² = ω²
To find ω, we take the square root of both sides:
ω = √(0.142m/s²)
Calculating the expression, we get:
ω ≈ 0.377 rad/s
Therefore, the circular ring of the space station should rotate at an angular speed of approximately 0.377 radians per second for the occupants to experience a perceived acceleration of 0.461g.
To learn more about centripetal acceleration click here
https://brainly.com/question/13380934
#SPJ11
An electron is moving to the right at 7.5×10^6 m/s and instantly a magneti field is tured on. The strength of the magnetic feld is, 040T. The magnetic field is out of the papen. A: How much firce is exertid on the electron by the magnetic field B. Show on the picture below the disertun of the firce (use Q or ⊗ ) if the force is into of ant of prper c. show the peth of the electar due to the force on the picture belaw, C. Show the peth of the electoon due to the force on the pictare beluw,
A) The formula to calculate the force exerted on the electron by the magnetic field is given by:
f = qvB
where f is the force exerted on the electron, q is the charge of the electron, v is the velocity of the electron, and B is the magnetic field strength. Substituting the values in the formula:
f = (1.6 × 10^-19 C) × (7.5 × 10^6 m/s) × (0.40 T)
f = 4.8 × 10^-13 N
B) The force exerted on the electron will be perpendicular to the direction of its velocity. Hence, the force will be represented as a circle with a dot or cross in the center. The dot indicates that the force is directed into the paper, while the cross indicates that the force is directed out of the paper.
C) The path of the electron, due to the force exerted by the magnetic field, can be determined using Fleming's left-hand rule. According to the rule, if the thumb represents the direction of the force, the first finger represents the direction of the magnetic field, and the second finger represents the direction of the velocity of the electron, then the path of the electron can be represented by the direction that the middle finger points. Since the force is directed into the paper, the path of the electron will be a circle perpendicular to the direction of the magnetic field.
To know more about electron visit:
https://brainly.com/question/12001116
#SPJ11
x(t)=cos(
6
π
t) (a) (4 marks) Is x(t) periodic signal? If so determine fundamental angular frequency wo of signal x(t) (b) (2 marks) Determine the Fourier series coelificients of x(t). (c) (2 marks) Calculate the Fourier transform X(jω) of the signal x(t). Total for Question 3:
a) Yes, x(t) is a periodic signal with a fundamental angular frequency wo of 6π.
b) The Fourier series coefficients of x(t) are A1 = 1 and B1 = 0.
c) The calculation of the Fourier transform X(jω) requires further evaluation, which I am unable to provide in this response.
Angular frequency, denoted by the symbol ω (omega), is a concept used to describe the rate of change of angular displacement or oscillation in a periodic motion. It is closely related to frequency, but instead of representing the number of cycles per unit of time, it represents the number of radians covered per unit of time.
a) Yes, x(t) is a periodic signal. A signal is considered periodic if there exists a positive value T such that x(t) = x(t + T) for all t. In this case, x(t) = cos(6πt), which means the signal repeats itself after a period of T. To find the fundamental angular frequency wo, we need to determine the smallest positive value of T that satisfies the periodicity condition.
The period of the cosine function is given by T = 2π/ω, where ω is the angular frequency. In this case, we have
6πt = 2π/ω. Solving for ω, we get ω = 6π.
Therefore, the fundamental angular frequency wo of signal x(t) is 6π.
b) To determine the Fourier series coefficients of x(t), we need to express x(t) as a sum of sinusoidal components with different frequencies and magnitudes. The Fourier series representation of a periodic signal x(t) is given by:
x(t) = ∑[An cos(nωt) + Bn sin(nωt)]
In this case, x(t) = cos(6πt). Since there is only one term in the original signal, we can conclude that only the n = 1 term will have a non-zero coefficient. Therefore, the Fourier series coefficients of x(t) are:
A1 = 1
B1 = 0
c) To calculate the Fourier transform X(jω) of the signal x(t), we use the following equation:
X(jω) = ∫[x(t)e^(-jωt)] dt
Substituting x(t) = cos(6πt) into the equation, we have:
X(jω) = ∫[cos(6πt)e^(-jωt)] dt
The integral can be evaluated using standard techniques. However, since this is a specific question with predetermined marks, I am unable to provide the complete solution here.
To know more about Angular frequency, visit:
https://brainly.com/question/33512539
#SPJ11
A stone is tied to a string (length = 1.25 m ) and whirled in a circle at the same constant speed in two different ways. First, the circle is horizontal and the string is nearly paraliel to the ground. Next, the circle is vertical. In the vertical case the maximum tension in the string is 7.70\% larger than the tension that exists when the circle is horizontal. Determine the speed of the stone. Number Units
The speed of the stone is given by:v² = 16.45/(0.077F1 + m × 9.8)
Given the length of the string is 1.25 m.
Let's assume the velocity of the stone is 'v' m/s.
To determine the speed of the stone, let's use the concept of centripetal force.
Suppose F1 be the tension when the circle is horizontal and F2 be the tension when the circle is vertical.
Therefore, tension force (F) is given by the following formula:
F = (mv²)/r ………. (i)
Where, m = mass of the stone, v = velocity of the stone, r = radius of the circle (string length).
Let's calculate tension force F1 when the circle is horizontal.F1 = (m×v²)/r ……… (ii)
Now, let's calculate tension force F2 when the circle is vertical.
The maximum tension is given by F2 + (7.70/100) × F2
= 1.077 × F2
⇒ F2 = F1 × (r/g) × (1.077 − 1)F2
= (F1 × r × 0.077)/g
Where, g = acceleration due to gravity = 9.8 m/s²
Using the formula (i), we can say that F2 = (mv²)/(r + a) ……… (iii)
Where, a = acceleration due to centripetal force.
Substituting the value of F2 from (iii) to (ii), we get:
(F1 × r × 0.077)/g = m(v²)/(r + a)
⇒ a = r (g × 0.077)/F1 ……… (iv)
Substitute the value of a from (iv) to (iii), we get:
F2 = m(g × r × 1.077)/[r × (g × 0.077/F1) + g]
⇒ F2 = (1.077F1)/(0.077F1 + mg) ……… (v)
Comparing (ii) and (v), we have:(m×v²)/r = (1.077F1)/(0.077F1 + mg) ⇒ v² = r(1.077F1)/(m × [0.077F1 + mg])
Substitute the given values in the above equation,v² = (1.25 × 1.077 × F1)/(0.077F1 + m × 9.8).
To know more about speed visit:-
https://brainly.com/question/28224010
#SPJ11
4. A projectile is fired from ground level at a speed of 25.8 m/s at an angle of 71.0
∘
above the horizontal. (a) What maximum height does it reach (above ground level)? (b) How long is the projectile in the air for before it lands? (c) What is the projectile's range? (d) What other angle (between 0
∘
and 90
∘
) could the projectile have been fired at which would resulted in the same range?
The projectile reaches a maximum height of approximately 24.6 meters, stays in the air for approximately 5.02 seconds, and has a range of approximately 80.9 meters.
The projectile reaches a maximum height of approximately 24.6 meters above ground level. It stays in the air for approximately 5.02 seconds before landing. The projectile's range is approximately 80.9 meters. The other angle at which the projectile could have been fired to achieve the same range is the complement of the given angle, which is 19.0 degrees above the horizontal.
To solve this problem, we can use the equations of projectile motion. The initial velocity of the projectile can be divided into its horizontal and vertical components. The horizontal component remains constant throughout the motion, while the vertical component is affected by gravity.
(a) To find the maximum height, we need to determine the time it takes for the projectile to reach its peak. Using the equation for vertical displacement, we can calculate that the maximum height is given by (v₀y²) / (2g), where v₀y is the initial vertical component of the velocity and g is the acceleration due to gravity. Plugging in the values, we find that the maximum height is approximately 24.6 meters.
(b) The time of flight can be found using the equation t = 2v₀y / g, where t is the time and v₀y is the initial vertical component of the velocity. Substituting the values, we find that the projectile stays in the air for approximately 5.02 seconds.
(c) The range of the projectile can be calculated using the equation R = v₀x * t, where R is the range, v₀x is the initial horizontal component of the velocity, and t is the time of flight. Plugging in the values, we find that the range is approximately 80.9 meters.
(d) To find the other angle that would result in the same range, we can use the fact that the range is symmetrical with respect to the launch angle. Therefore, the other angle would be the complement of the given angle, which is 19.0 degrees above the horizontal.
Learn more about projectle here:
https://brainly.com/question/28043302
#SPJ11
(13\%) Problem 1: Consider the vectors
A
=(3.0
i
^
+4.0
j
^
−5.0
k
^
) and
B
=(1.0
i
^
+7.0
j
^
−3.0
k
^
) What is the angle between these two vectors in degrees? θ= 0 Hints: 0 for a 0% deduction. Hints remaining: 0 Feedback: 0% deduction per feedback.
The dot product of the two vectors is zero, so the projections of the two vectors onto each other are zero. The angle between the two vectors is 90 degrees.
The dot product of two vectors is a scalar quantity that represents the projection of one vector onto the other. The angle between two vectors is equal to the angle between their projections.
In this problem, the dot product of the two vectors is zero. This means that the projections of the two vectors onto each other are zero. Therefore, the angle between the two vectors is 90 degrees.
The dot product of two vectors is given by the following formula:
A · B = |A| |B| cos θ
where A and B are the vectors, |A| and |B| are the magnitudes of the vectors, and θ is the angle between the vectors.
In this problem, the dot product of the two vectors is zero. This means that cos θ = 0. Therefore, θ = 90 degrees.
By finding the dot product of the two vectors, which is zero. This means that the angle between the two vectors is 90 degrees.
To learn more about vectors click here
brainly.com/question/29740341
#SPJ11
An electrically charged 30 g piece of amber attracts a single cat hair which has a mass of 3.0e−11 g and is electrically neutral. How does the electrical force exerted by the cat hair on the amber compare to the force of the amber on the cat hair? they are nonzero and exactly equal the cat hair exerts a bigger force on the amber than the cat hair exerts on the amber, and both are nonzero the cat hair does not exert any force on the amber since it is neutral the amber exerts a bigger force on the cat hair than the cat hair exerts on the amber, and both forces are nonzero
The answer to this question is "the amber exerts a bigger force on the cat hair than the cat hair exerts on the amber, and both forces are nonzero".It is a known fact that when two substances are rubbed together, they become electrically charged.
This occurs when the amber is rubbed against the cat hair, which makes the amber positively charged, while the cat hair becomes negatively charged. It is also known that objects with opposite charges are attracted to one another, while those with similar charges are repelled.The electrical force exerted by the cat hair on the amber is equal in magnitude and opposite in direction to the force exerted by the amber on the cat hair. This is according to Newton's third law of motion which states that for every action, there is an equal and opposite reaction.
Both forces are nonzero because they are being exerted on two different objects. However, the amber exerts a bigger force on the cat hair than the cat hair exerts on the amber. This is because the amber has a much greater mass than the cat hair, and the force between two objects is directly proportional to the mass of each object. Therefore, the bigger the mass of an object, the greater the force it exerts on other objects.
learn more about Newton's third law of motion
https://brainly.com/question/23772134
#SPJ11
IP A jogger runs with a speed of 3.05 m/s in a Part A direction 30.0
∘
above the x axis. Find the x and y components of the jogger's velocity. Part B How will the velocity components found in part (a) change if the jogger's speed is halved?
The x and y components of the jogger's velocity are 2.64 m/s and 1.53 m/s respectively. If the jogger's speed is halved, the velocity components found in part (a) will also be halved and the new velocity components will be 1.32 m/s and 0.765 m/s respectively.
Given data:
Speed of jogger = 3.05 m/s
Angle = 30°
To find: Components of velocity
Solution:
We have the velocity of jogger and the angle made by the velocity with x-axis
We can use trigonometry here
Let x be the velocity component along the x-axis and y be the velocity component along the y-axis
Hence, the velocity components are: x = 2.64 m/s and y = 1.53 m/s
Now, we have to find the velocity components if the speed is halved.
The formula for velocity is:
v = s/t
Where
v = velocity
s = distance travelled
t = time taken
We know that when the speed is halved, the time taken for travelling the same distance will be doubled. So, we can write:
v = s/t = s/2t
Therefore, the new velocity will be half of the original velocity.
So, the new velocity components will be half of the original velocity components: x = 1.32 m/s and y = 0.765 m/s
Answer: The x and y components of the jogger's velocity are 2.64 m/s and 1.53 m/s respectively. If the jogger's speed is halved, the velocity components found in part (a) will also be halved and the new velocity components will be 1.32 m/s and 0.765 m/s respectively.
To know more about velocity, visit:
https://brainly.com/question/30559316
#SPJ11
As part of the circus experience, people can jump straight up in the air (so completely vertically) off of a ledge to then fall back down and land in a very deep ball pit. If a person jumps up completely vertically with an initial velocity of +5 m/s, travels up in the air to their max height, falls straight back down and then hits the top of the ball pit after a total of 2.3s.
1) What is their velocity when they hit the top of the ball pit? (choose the best answer)
a. +27.6
b.+17.6
c. -27.6
d. -17.6
2) When the person above hits the ball pit they are slowed down by the balls until they come to a stop before hitting the bottom. Using the same number line, what is the person's average acceleration while in the balls? (select all that apply)
a. 0 m/s^2
b. positive because they are decelerating down
c. negative because they are moving down
d. negative because they are decelerating down
1) The velocity of the person when they hit the top of the ball pit is -17.6 m/s.2) The average acceleration of the person while in the balls is negative because they are decelerating down. Therefore, the answer options (c) and (d) are correct. Given that a person jumps vertically with an initial velocity of +5 m/s.Using the equation of motion:v = u + at We need to calculate the final velocity of the person when they hit the top of the ball pit.
Assuming the acceleration due to gravity is -9.8 m/s² (as the person is moving in the downward direction), the time taken to reach the maximum height is given by:t = u/g = 5/9.8 = 0.51 s Since the time taken to fall back is given by 2.3 s – 0.51 s = 1.79 s, the velocity with which the person hits the ball pit is:v = u + gt = 5 – 9.8(1.79) = -17.6 m/s Therefore, the answer to the first question is (d) -17.6 m/s.
Average acceleration is given by the formula:a = (v - u)/t Substituting the values of velocity and time, we geta = (-17.6 - 5)/2.3 = -9.04 m/s²Therefore, the answer options (c) and (d) are correct. The answer to the second question is (c) negative because they are moving down and (d) negative because they are decelerating down. The answer options (a) 0 m/s² and (b) positive because they are decelerating down are incorrect.
To know more about velocity visit:-
https://brainly.com/question/30559316
#SPJ11
