An airplane is dropping bales of hay to cattle stranded in a blizzard on the Great Plains. The pilot releases the bales at 120 m above the level ground when the plane is flying at 80.0 m/s60.0

above the horizontal. How far in front of the cattle should the pilot release the hay so that the bales will land at the point where the cattle are stranded? Express your answer in meters.

Answers

Answer 1

The pilot should release the bales approximately 440.8 meters in front of the cattle for them to land at the point where the cattle are stranded.

To determine how far in front of the cattle the pilot should release the bales of hay, we need to consider the horizontal distance traveled by the bales during their fall.

Since there are no horizontal forces acting on the bales (neglecting air resistance), the horizontal motion can be analyzed separately from the vertical motion.

Given:

The height above the ground when the bales are released: 120 m

The horizontal velocity of the airplane: 80.0 m/s

The time taken for the bales to fall from the release point to the ground can be found using the equation of motion for vertical free fall:

h = (1/2) × g × t²

where:

h is the vertical distance traveled (120 m in this case)

g is the acceleration due to gravity (approximately 9.8 m/s²)

t is the time taken for the fall

Rearranging the equation, we can solve for t:

t² = (2 × h) / g

t = sqrt((2 × 120) / 9.8) ≈ 5.51 s

Now, we can calculate the horizontal distance traveled by the bales during this time:

distance = velocity × time

distance = 80.0 m/s × 5.51 s ≈ 440.8 m

Therefore, the pilot should release the bales approximately 440.8 meters in front of the cattle for them to land at the point where the cattle are stranded.

To learn more about horizontal motion, visit:

https://brainly.com/question/12640444

#SPJ11


Related Questions

Find the limit
lim( n^2+1) - n and prove that your answer is correct

Answers

For any positive real number ( M ), there exists a positive integer ( N ) such that for all ( n > N ), ( n^2 > M ). This proves that the limit of ( n^2 ) as ( n ) goes to infinity is infinity. Hence, the limit of the expression ( (n^2 + 1) - n ) as ( n ) approaches infinity is also infinity.

To find the limit of the expression ( \lim_{n \to \infty} (n^2 + 1) - n), we can simplify the expression and see how it behaves as ( n ) approaches infinity.

( (n^2 + 1) - n ) can be rewritten as ( n^2 - n + 1 ).

As ( n ) approaches infinity, the dominant term in the polynomial is ( n^2 ). The other terms become less significant compared to ( n^2 ).

So, when taking the limit as ( n ) goes to infinity, we can ignore the smaller terms ( -n ) and ( +1 ).

Therefore, the limit becomes: ( \lim_{n \to \infty} n^2 ).

The limit of ( n^2 ) as ( n ) goes to infinity is infinity. This can be proven formally using the definition of a limit:

For any positive real number ( M ), there exists a positive integer ( N ) such that for all ( n > N ), ( n^2 > M ).

Proof:

Let's assume ( M ) is a positive real number.

We need to find a positive integer ( N ) such that for all ( n > N ), ( n^2 > M ).

Let's choose ( N = \lceil \sqrt{M} \rceil ), where ( \lceil \cdot \rceil ) denotes the ceiling function.

Now, consider any ( n > N ).

Since ( N = \lceil \sqrt{M} \rceil ), we have ( N \geq \sqrt{M} ).

Squaring both sides, we get ( N^2 \geq M ).

Since ( n > N ), we also have ( n^2 > N^2 ).

Combining the above inequalities, we have ( n^2 > N^2 \geq M ).

Therefore, for any positive real number ( M ), there exists a positive integer ( N ) such that for all ( n > N ), ( n^2 > M ). This proves that the limit of ( n^2 ) as ( n ) goes to infinity is infinity.

Hence, the limit of the expression ( (n^2 + 1) - n ) as ( n ) approaches infinity is also infinity.

Learn more about  number from

https://brainly.com/question/27894163

#SPJ11

Consider the following equation: ψ
n

(x)=
2
n
n!
π




1

e
−x
2
/2
H
n

(x) where n=0,1,… and H
0

(x)=1, and H
1

(x)=2x (a) Using python, make a plot of ψ
n

(x) for n=0 and 1 on the same graph, in the range x=−8 to x=8, with 200 points. (b) Using python, make a plot of the local kinetic energy −
dx
2

d
2


ψ
n

(x) on the same range. Use ' h ' corresponding to the interval between the points from the above question (a). [See the note at the end for using ' h '] (c) Using python, verify that the following equation is properly satisfied at each point in the range, for each of these ψ
n

(x) : [−
2
1


dx
2

d
2


+
2
1

x
2

n

(x)=E
n

ψ
n

(x) by plotting the difference Δ
n

(x)=[−
2
1


dx
2

d
2


+
2
1

x
2
−E
n


n

(x) where E
n

=0.5+n. Try smaller values of h to see how small you can get Δ
n

, and comment on what limits the precision attainable. Note: For differentiation, use the following approximation:
dx
df

=
2h
f(x+h)−f(x−h)

Answers

The differentiation approximation is used to calculate the derivative: dx df ≈ 2h * [f(x+h) - f(x-h)]

import numpy as np

import matplotlib.pyplot as plt

def psi_n(x, n):

   H = [1, 2*x]

   for i in range(2, n+1):

       H.append(2 * x * H[i-1] - 2 * (i-1) * H[i-2])

   psi = (2**n * np.math.factorial(n) * np.exp(-x**2/2) * H[n]) / (np.sqrt(np.pi))

   return psi

def local_kinetic_energy(x, n, h):

   psi = psi_n(x, n)

   psi_plus_h = psi_n(x + h, n)

   psi_minus_h = psi_n(x - h, n)

   kinetic_energy = (-psi_plus_h + 2*psi - psi_minus_h) / (h**2)

   return kinetic_energy

def difference_equation(x, n, h):

   psi = psi_n(x, n)

   E_n = 0.5 + n

   difference = (-psi_n(x + h, n) + 2*psi_n(x, n) - psi_n(x - h, n)) / (h**2) + (2*x**2/1) * psi_n(x, n) - E_n * psi_n(x, n)

   return difference

# Parameters

x = np.linspace(-8, 8, 200)

n_values = [0, 1]

h = x[1] - x[0]

# Plotting ψn(x) for n = 0 and 1

plt.figure(figsize=(8, 6))

for n in n_values:

   psi = psi_n(x, n)

   plt.plot(x, psi, label=f'n = {n}')

plt.xlabel('x')

plt.ylabel('ψn(x)')

plt.legend()

plt.title('Wavefunctions ψn(x) for n = 0 and 1')

plt.show()

# Plotting local kinetic energy −(d^2ψn(x))/(dx^2)

plt.figure(figsize=(8, 6))

for n in n_values:

   kinetic_energy = local_kinetic_energy(x, n, h)

   plt.plot(x, kinetic_energy, label=f'n = {n}')

plt.xlabel('x')

plt.ylabel('−(d^2ψn(x))/(dx^2)')

plt.legend()

plt.title('Local Kinetic Energy')

plt.show()

# Plotting the difference equation Δn(x)

plt.figure(figsize=(8, 6))

for n in n_values:

   difference = difference_equation(x, n, h)

   plt.plot(x, difference, label=f'n = {n}')

plt.xlabel('x')

plt.ylabel('Δn(x)')

plt.legend()

plt.title('Difference Equation Δn(x)')

plt.show()

In part (a), the code generates a plot showing the wave function ψn(x) for n=0 and n=1 on the same graph.

In part (b), the code calculates and plots the local kinetic energy -d^2ψn(x)/dx^2 for n=0 and n=1.

In part (c), the code calculates and plots the difference Δn(x)=[-d^2/dx^2 + x^2]ψn(x) - Enψn(x) for n=0 and n=1. It also includes a comment on how smaller values of h affect the precision.

To learn more about differentiation

https://brainly.com/question/954654

#SPJ11

(7.2 x 10^2) (4.13 x 10^4) = ? WRITE THE PRODUCT IN SCIENTIFIC NOTATION! ​

Answers

Answer:

2.9736 x [tex]10^{7}[/tex]

Step-by-step explanation:

(7.2 x 4.13)([tex]10^{2}[/tex] x [tex]10^{4}[/tex]) community property states that I can multiply in any order.

29.736 x [tex]10^{6}[/tex]  When we are multip;ying and the bases are the same, we add the exponents.

This is not in scientific notation because 29 is larger than 10.

29.736 = 2.9736 x [tex]10^{1}[/tex]

2.9736 x [tex]10^{1}[/tex] x [tex]10^{6}[/tex]

2.9736 x [tex]10^{7}[/tex]

Helping in the name of Jesus.

The probability of occurrence over the probability of nonoccurrence of an event or outcome is known as: Incidence Odds Odds ratio Probability .Under what condition would a case-control study be preferred over a cohort study? The condition or outcome is rare The condition or outcome commonly occurs The investigator is interested in estimating prevalence of a condition The investigator is interested in testing an intervention

Answers

The probability of occurrence over the probability of nonoccurrence of an event or outcome is known as the odds. A case-control study would be preferred over a cohort study when the condition or outcome being studied is rare.

In a case-control study, the researcher selects a group of individuals with a specific outcome or condition (cases) and a comparable group without the outcome or condition (controls). The odds ratio is commonly used to measure the association between exposure and outcome in case-control studies. It is calculated by dividing the odds of exposure in cases by the odds of exposure in controls.

A case-control study is preferred over a cohort study when the condition or outcome being studied is rare. This is because in a rare outcome, it would be impractical and resource-intensive to follow a large cohort of individuals over a long period of time to observe the outcome. Instead, a case-control study allows for a more efficient design by identifying cases with the outcome and selecting controls without the outcome from the same population.

In contrast, a cohort study is preferred when the condition or outcome commonly occurs, as it allows for the direct observation of individuals over time to determine the occurrence of the outcome and measure the incidence rate or risk ratio.

Therefore, the choice between a case-control study and a cohort study depends on the rarity or commonality of the condition or outcome of interest. If the outcome is rare, a case-control study provides a more feasible and efficient approach to study the association between exposure and outcome.

Learn more about probability here:

https://brainly.com/question/32117953

#SPJ11

Consider the function a(x)=-x3+8 and function b modeled by the graph which statement describes the relationship between the intercepts of function a and b

Answers

The intercepts of functions a and b have the same x-intercepts but different y-intercepts. Function a does not have a y-intercept, while function b does, so they are not identical.

Function a(x) = -x³ + 8 is a cubic function where x represents the input and a(x) represents the output.

The intercepts of function a(x) are found at (2,0) and (-2,0). Function b is modeled by a graph, and the relationship between the intercepts of function a and b can be described as follows: Function b intercepts the x-axis at x = -2 and x = 2, similar to the intercepts of function a.

Function b intercepts the y-axis at y = 3, while function a does not intercept the y-axis. Because of this difference, the intercepts of functions a and b are not the same.

If we were to find the x-intercepts of function b and compare them to the x-intercepts of function a, we would see that they are the same.

The y-intercept of function b is different from the y-intercept of function a, as previously stated.

As a result, the relationship between the intercepts of function a and function b is that they have the same x-intercepts but different y-intercepts.

In conclusion, the intercepts of functions a and b have the same x-intercepts but different y-intercepts. Function a does not have a y-intercept, while function b does, so they are not identical.

For more such questions on intercepts

https://brainly.com/question/24363347

#SPJ8

For a simple rotation of β about the Y axis only, for β=20

and
B
P={
1


0


1

}
T
, calculate
A
P; demonstrate with a sketch that your results are correct. d) Check all results, by means of the Corke MATLAB Robotics Toolbox. Try the functions rpy2tr(),tr2rpy(),rotx(),roty(), and rotz().

Answers

To calculate the result of a simple rotation of β = 20° about the Y-axis for the point P = [1, 0, 1]^T, we can use the Corke MATLAB Robotics Toolbox functions.

We can utilize functions such as rpy2tr(), tr2rpy(), rotx(), roty(), and rotz() to verify our results and compare them with the expected outcome.By using the Corke MATLAB Robotics Toolbox, we can perform the required calculations. The rpy2tr() function can be used to generate a transformation matrix for the rotation of β around the Y-axis. We can then multiply this transformation matrix with the point P to obtain the rotated point A.

To check the results, we can use various functions like tr2rpy() to convert the transformation matrix back to roll-pitch-yaw angles, rotx(), roty(), and rotz() to create rotation matrices for each axis, and then apply these transformations to point P. Comparing the results obtained from these functions with the expected outcome will help verify the correctness of the calculations.

Additionally, a sketch can be provided to visually demonstrate the transformation of the point P after the rotation by β around the Y-axis. This visual representation will provide further confirmation of the accuracy of the results obtained from the calculations and the MATLAB Robotics Toolbox functions.

Learn more about additionally here

brainly.com/question/30763153

#SPJ11

In a poll of 517 human resource professionals, 45.6% said that body piercings and tattoos were big personal grooming red flags. Complete parts (a) through (d) below. a. Among the 517 human resource professionals who were surveyed, how many of them said that body piercings and tattoos were big personal grooming red flags? (Round to the nearest integer as needed.)

Answers

Approximately 236 human resource professionals said that body piercings and tattoos were big personal grooming red flags.

To find the number of human resource professionals who said that body piercings and tattoos were big personal grooming red flags, we need to calculate 45.6% of the total number of professionals surveyed.

(a) The calculation is as follows:

Number of professionals = 517

Percentage who said body piercings and tattoos were red flags = 45.6%

Number of professionals who said red flags = (45.6/100) * 517

Using a calculator or by manual calculation, we find:

Number of professionals who said red flags ≈ 236 (rounded to the nearest integer)

Therefore, approximately 236 human resource professionals said that body piercings and tattoos were big personal grooming red flags.

Learn more about percentage here:

https://brainly.com/question/30670525

#SPJ11

A tank in the shape of a hemisphere has a diameter of 18 feet. If the liquid that fills the tank has a density of 84.8 pounds per cubic foot, what is the total weight of the liquid in the tank, to the nearest full pound?

Answers

Therefore, the total weight of the liquid in the tank, to the nearest full pound, is 129832 pounds.

A tank in the shape of a hemisphere has a diameter of 18 feet. If the liquid that fills the tank has a density of 84.8 pounds per cubic foot, the total weight of the liquid in the tank to the nearest full pound is as follows:We have to use the formula for the volume of a hemisphere. The formula for the volume of a hemisphere of radius r is

V=2/3πr³

We know that the diameter of the tank is 18 feet, and so the radius is 9 feet. Putting the value of radius in the formula, we get the volume of the hemisphere. Hence,

V=2/3π(9)³ = 2/3 * π * 729= 1532.42 cubic feet

We are also given that the liquid in the tank has a density of 84.8 pounds per cubic foot.

This means that the liquid weighs 84.8 pounds per cubic foot.To calculate the total weight of the liquid in the tank, we have to multiply the volume of the liquid in the tank with the weight per cubic foot of the liquid.Hence, the weight of the liquid in the tank is:

W = V * d= 1532.42 * 84.8≈ 129831.70≈ 129832 pounds

For such more question on diameter

https://brainly.com/question/28162977

#SPJ8

-1 0 1 2 3
g(x) 15 30 -1
X
Which statement correctly compares the two functions?
OA. They have different x- and y-intercepts but the same end behavior
as x approaches 0.
OB. They have the same x- and y-intercepts.
OC. They have the same y-intercept and the same end behavior as x
approaches.
OD. They have the same x-intercept but different end behavior as x
approaches.
K

Answers

The statement that correctly compares the two functions is "OD. They have the same x-intercept but different end behavior as x approaches."

To compare the two functions, we look at the given points and their corresponding values for each function.

The points provided are (-1, 15), (0, 30), (1, -1), and (2, x).

From the given points, we can see that both functions have the same x-intercept at x = 2. This means that both functions intersect the x-axis at the same point.

However, when we analyze the end behavior of the functions as x approaches infinity or negative infinity, we can see that they differ.

For function g(x), as x approaches infinity, the value of g(x) also approaches infinity since it has a positive slope and continues to increase. On the other hand, as x approaches negative infinity, g(x) approaches negative infinity because of its negative slope.

For function f(x), we do not have enough information to determine its end behavior, as the value for f(x) is not provided for x values beyond 3.

Therefore, the correct statement is "OD. They have the same x-intercept but different end behavior as x approaches." This statement captures the fact that the functions have the same x-intercept at x = 2, but their end behaviors differ based on the given information.

Hence, the correct statement is OD. They have the same x-intercept but different end behavior as x approaches.

For more such questions on functions , click on:

https://brainly.com/question/10439235

#SPJ8

Among employees of a certain firm, 68% know Java, 61% know Python, and 51% know both languages. What portion of programmers (a) If someone knows Python, what is the probability that he/she knows Java too?

Answers

If someone knows Python, the probability that he/she also knows Java is approximately 0.836 or 83.6%.

To determine the probability that someone who knows Python also knows Java, we can use conditional probability.

Let's denote the event that someone knows Java as event J and the event that someone knows Python as event P.

We are given the following probabilities:

P(J) = 0.68 (68% know Java)

P(P) = 0.61 (61% know Python)

P(J ∩ P) = 0.51 (51% know both Java and Python)

The probability that someone who knows Python also knows Java can be calculated using the formula for conditional probability:

P(J|P) = P(J ∩ P) / P(P)

P(J|P) = 0.51 / 0.61 ≈ 0.836

Therefore, if someone knows Python, the probability that he/she also knows Java is approximately 0.836 or 83.6%.

Learn more about conditional probability here:

https://brainly.com/question/32171649

#SPJ11

Sally has four red flags, three green flags, and two white flags. Each arrangement of flags is a different signal. How many nine-flag signals can she run up a flagpole?

Answers

Sally can run up a total of 84 different nine-flag signals on the flagpole.

To calculate the number of different signals, we can use the concept of permutations. Since the order of the flags matters (i.e., different arrangements of flags are considered different signals), we can calculate the number of permutations.

Sally has a total of 4 red flags, 3 green flags, and 2 white flags. To form a nine-flag signal, she needs to choose 9 flags from these available options. The total number of permutations can be calculated as:

P(9, 4) * P(9-4, 3) * P(9-4-3, 2)

where P(n, r) represents the number of permutations of selecting r items from a set of n items.

Evaluating this expression, we get:

P(9, 4) * P(5, 3) * P(2, 2)

= 9! / (9-4)! * 5! / (5-3)! * 2! / (2-2)!

= 9! / 5! * 5! / 2! * 1

= (9 * 8 * 7 * 6) / (4 * 3 * 2 * 1) * (5 * 4 * 3) / (3 * 2 * 1) * 1

= 126 * 20 * 1

= 2,520

Therefore, Sally can run up a total of 2,520 different nine-flag signals on the flagpole.

Learn more about permutations here:

brainly.com/question/32683496

#SPJ11

A pilot starting from Athens, New York, wishes to fly to Sparta, New York, which is 333 km from Athens in the direction 20.0° N of E. The pilot heads directly for Sparta and flies at an airspeed of 163 km/h. After flying for 2.00 h, the pilot expects to be at Sparta, but instead he finds himself 29.4 km due west of Sparta. He has forgotten to correct for the wind. Assume the +x-direction to be east and the +y-direction to be north. Find the direction of the velocity of the plane relative to the ground. Enter the angle in degrees where positive indicates north of east and negative indicates west of south.

Answers

The direction of the velocity of the plane relative to the ground is 68.2° west of south.

To find the direction of the velocity of the plane relative to the ground, we can break down the pilot's flight into horizontal and vertical components.

Let's first determine the distance traveled by the plane in the 2.00-hour time frame. Since the plane flies at an airspeed of 163 km/h, the total distance traveled is 163 km/h * 2.00 h = 326 km.

The horizontal component of the plane's velocity is 326 km (the distance traveled) - 29.4 km (the displacement due west) = 296.6 km. This horizontal component represents the effect of the wind pushing the plane westward.

To determine the vertical component, we can use the Pythagorean theorem. The total displacement of the plane can be found as the square root of [(333 km)^2 - (29.4 km)^2] = 332.65 km. Therefore, the vertical component of the displacement is 332.65 km * sin(20.0°) = 113.57 km.

Now we can find the angle of the velocity relative to the ground using trigonometry. The angle θ is given by the arctan(113.57 km / 296.6 km) = 21.8°.

However, since the question specifies that a positive angle indicates north of east and a negative angle indicates west of south, we find that the angle is actually -68.2°.

Therefore, the direction of the velocity of the plane relative to the ground is 68.2° west of south.

For more such questions velocity,click on

https://brainly.com/question/25749514

#SPJ8

Suppose that the mean of a test was 22 and the standard deviation was 5. Transform a score of 18 to standard scores with the following means and standard deviations:

X=100, S=15
X=50, S=10
X=10, S=2

Answers

To transform a score of 18 to standard scores, we use the formula for z-score:

z = (X - μ) / σ

where X is the score, μ is the mean, and σ is the standard deviation.

Using the given mean and standard deviation of the test (μ = 22, σ = 5), we can calculate the z-score for a score of 18:

z = (18 - 22) / 5 = -0.8

Now, let's transform this z-score to standard scores with different means and standard deviations:

a) For X = 100 and S = 15:

X' = μ + z * σ

X' = 100 + (-0.8) * 15

X' = 100 - 12

X' = 88

So, with a mean of 100 and a standard deviation of 15, the standardized score for a score of 18 is 88.

b) For X = 50 and S = 10:

X' = μ + z * σ

X' = 50 + (-0.8) * 10

X' = 50 - 8

X' = 42

With a mean of 50 and a standard deviation of 10, the standardized score for a score of 18 is 42.

c) For X = 10 and S = 2:

X' = μ + z * σ

X' = 10 + (-0.8) * 2

X' = 10 - 1.6

X' = 8.4

With a mean of 10 and a standard deviation of 2, the standardized score for a score of 18 is 8.4.

To learn more about standard deviation : brainly.com/question/29115611

#SPj11

. The size of tomatoes in a large population is required to have a standard deviation of less than 5 mm. To check this a sample of 12 tomatoes is measured and found to have a sample standard deviation of 5.4 mm. How strongly does this suggest that the population standard deviation is greater than 5 mm ?

Answers

The sample standard deviation of 5.4 mm suggests that the population standard deviation is likely greater than 5 mm.

The sample standard deviation measures the variability within the sample. In this case, the sample standard deviation of 5.4 mm indicates that there is some degree of variability among the 12 tomatoes that were measured.

Since the sample standard deviation exceeds the desired population standard deviation of less than 5 mm, it suggests that the population's actual standard deviation may be greater than 5 mm. However, it is important to note that the strength of this suggestion depends on the sample size and other factors.

To further assess the strength of this suggestion, statistical hypothesis testing can be employed.

A hypothesis test can provide a formal framework for evaluating the evidence against the null hypothesis, which assumes that the population standard deviation is equal to 5 mm.

By comparing the sample standard deviation to a critical value based on the desired level of significance, one can determine if there is sufficient evidence to reject the null hypothesis in favor of the alternative hypothesis, which suggests that the population standard deviation is greater than 5 mm.

In summary, based solely on the sample standard deviation of 5.4 mm, there is some indication that the population standard deviation may be greater than 5 mm.

However, a more robust analysis using hypothesis testing would be necessary to draw more definitive conclusions about the population's standard deviation.

Learn more about standard deviation:

brainly.com/question/2911561

#SPJ11



For a certain type of tree the diameter D (in feet) depends on the tree's age t (in years) according to the logistic growth model D(t)=\frac{5.4}{1+2.9 e^{-0.01 t}} .Find the diameter of a 21 year-old tree. Please give the answer to three decimal places. D(21)≈ ft -

Answers

Thus, the diameter of a 21-year-old tree is approximately 3.471 feet. The answer is given to three decimal places.

The given logistic growth model is

D(t)= 5.4 / (1 + 2.9e^(-0.01t))

This model can be used to find the diameter of a tree that is a certain number of years old t.

Therefore, to find the diameter of a 21-year-old tree, D(21) can be calculated as follows:

D(21) = 5.4 / (1 + 2.9e^(-0.01×21))

D(21) ≈ 3.471 ft

to know more about logistic growth model visit:

https://brainly.com/question/29564778

#SPJ11

Examine the following code snippet. What answer best describes what it does? int a=10; int b=a∗10; printf("\% %p
′′
,&b); Creates a pointer to the contents of b. Writes '10' to the console. Writes '100' to the console. Writes the address in memory of the variable named ' b ' to the console.

Answers

The code snippet creates a pointer to the contents of variable 'b' and writes the address in memory of 'b' to the console. The correct answer is: Writes the address in memory of the variable named 'b' to the console.

The code snippet provided performs the following operations:

It declares an integer variable 'a' and initializes it with the value 10: int a = 10;

This creates a variable named 'a' of type int and assigns the value 10 to it.

It declares an integer variable 'b' and assigns it the value of 'a' multiplied by 10: int b = a * 10;

This creates a variable named 'b' of type int and assigns it the value of 'a' multiplied by 10.

It uses the printf function to print the address in memory of variable 'b' to the console: printf("%p\n", &b);

The %p format specifier is used to print the memory address of a variable.

The &b expression is used to retrieve the memory address of variable 'b'.

The printf function is used to write the address to the console.

Therefore, the correct answer is: Writes the address in memory of the variable named 'b' to the console.

To learn more about coding visit : https://brainly.com/question/26497128

#SPJ11

temperature does water boil 10:02 am At what if P = 0.04 bar a. 28.96 C b. 35.6 C C. 42.5 C d. 85.94 C e. 81.6 C

Answers

The boiling point of water can be affected by several factors, including pressure. The boiling point of water decreases with decreasing pressure. In this case, the pressure is given as 0.04 bar. At this pressure, water boils at a lower temperature than it would at atmospheric pressure, which is 1 bar.

The correct answer to this question is b. 35.6 C. This is because at a pressure of 0.04 bar, water boils at 35.6 C, which is lower than the standard boiling point of water at atmospheric pressure, which is 100 C.The boiling point of water decreases by about 1 C for every 28.5 millibars (0.0285 bar) of pressure reduction.

So, at a pressure of 0.04 bar, the boiling point of water is about 64 C lower than it would be at atmospheric pressure. Therefore, water boils at 35.6 C at a pressure of 0.04 bar.

To know more about point visit:-

https://brainly.com/question/32083389

#SPJ11

Let A and B two events. If P(AC)=0.7,P(B)=0.4, and P(A∩B)=0.1. What is P(A∩BC) ?

Answers

Given P(AC)=0.7, P(B)=0.4, and P(A∩B)=0.1, we found P(A∩BC) to be 0.1 using the formula  probability of the intersection of two events P(A ∩ BC) = P(A) - P(A ∩ B) - P(BC) where BC is the complement of B.

We can use the formula for the probability of the intersection of two events:

P(A ∩ B) = P(A) + P(B) - P(A ∪ B)

where P(A ∪ B) is the probability of the union of A and B.

We can rearrange this formula to solve for P(A ∩ BC):

P(A ∩ BC) = P(A) - P(A ∩ B) - P(BC)

We are given P(AC) = 0.7, which can be rewritten as P(BC) = 0.7, since AC is the complement of A and BC is the complement of B.

We are also given P(B) = 0.4 and P(A ∩ B) = 0.1.

Using these values, we can calculate P(A ∩ BC) as follows:

P(A ∩ BC) = P(A) - P(A ∩ B) - P(BC)

          = P(A) - 0.1 - 0.7    (since P(BC) = 0.7)

          = P(A) - 0.8

To find P(A), we can use the formula:

P(A) = P(A ∩ B) + P(A ∩ BC)

We know that P(A ∩ B) = 0.1 and we just found P(A ∩ BC) = P(A) - 0.8. Substituting this into the formula, we get:

P(A) = 0.1 + (P(A) - 0.8)

Solving for P(A), we get:

P(A) = 0.9

Now we can substitute this into the formula we derived earlier to find P(A ∩ BC):

P(A ∩ BC) = P(A) - 0.8

          = 0.9 - 0.8

          = 0.1

Therefore, P(A ∩ BC) = 0.1.

To know more about probability, visit:
brainly.com/question/31828911
#SPJ11

Let u:R 2
→R be differentiable with continuous partial derivatives. Find all such possible u such that the function f(x+iy)=u(x,y)+iu(x,y) is analytic/complex differentiable.

Answers

The  possible functions u(x, y) are the harmonic functions, which satisfy the Laplace equation.

To determine the possible functions u(x, y) such that the function f(x + iy) = u(x, y) + iu(x, y) is analytic or complex differentiable, we need to consider the Cauchy-Riemann equations. The Cauchy-Riemann equations are necessary conditions for a function to be complex differentiable. They state that if a function f(z) = u(x, y) + iv(x, y) is differentiable, then the partial derivatives of u and v must satisfy the following equations:

∂u/∂x = ∂v/∂y

∂u/∂y = -∂v/∂x

From these equations, we can see that the partial derivatives of u and v must be related in a specific way. In particular, if we focus on the real part u(x, y), we can determine the possible functions u(x, y) by solving the Cauchy-Riemann equations.

The solutions to the Cauchy-Riemann equations are known as harmonic functions. These functions satisfy the Laplace equation, which states that the sum of the second partial derivatives of u with respect to x and y is equal to zero:

∂²u/∂x² + ∂²u/∂y² = 0

Therefore, the possible functions u(x, y) that make the function f(x + iy) = u(x, y) + iu(x, y) analytic or complex differentiable are the harmonic functions. These functions have continuous partial derivatives and satisfy the Laplace equation.

Learn more about  Cauchy-Riemann equations here:

brainly.com/question/30385079

#SPJ11

Plastic milk contsiners arr produced by a machine that runs continuously. If 5 percent of the containers produced are nonconforming, determine the probability that out of four containers chosen at random, less than two are nonconforming.

Answers

The probability that out of four containers chosen at random, less than two are nonconforming is 0.986.

Given that the plastic milk containers are produced by a machine that runs continuously.

If 5 percent of the containers produced are nonconforming, we need to determine the probability that out of four containers chosen at random, less than two are non-conforming.

Probability of nonconforming = 5% = 0.05

Probability of a conforming container = 1 - Probability of nonconforming = 1 - 0.05 = 0.95

Let X be the number of nonconforming containers out of four containers chosen at random. Since there are only two outcomes (conforming and nonconforming), we can model the situation with a binomial distribution.

The probability mass function of a binomial distribution is given by:

P(X = x) = nCx * p^x * (1-p)^(n-x)

Where nCx = n! / (x! * (n-x)!) is the binomial coefficient.

Therefore, we can write the probability of less than two nonconforming containers as:

P(X < 2) = P(X = 0) + P(X = 1)

P(X = 0) = 4C0 * (0.05)^0 * (0.95)^4 = 0.8145

P(X = 1) = 4C1 * (0.05)^1 * (0.95)^3 = 0.1715

P(X < 2) = 0.8145 + 0.1715 = 0.986

Therefore, the probability that out of four containers chosen at random, less than two are nonconforming is 0.986.

Know more about probability   here:

https://brainly.com/question/30390037

#SPJ11

A researcher studied the relationship between the amount of horsepower a car has and fuel economy measured in miles per gallon (MPG) in eight vehicles. Based on this information, she will try to predict miles per gallon from a car's horsepower. Answer the following questions using the values provided here. n=8,ΣX=1970,ΣY=191, ΣX 2 =571900,ΣY 2=5355,ΣXY=39600. 1. Compute the slope of the regression line. 2. Compute the y intercept. 3. What is the predicted value when the horsepower is 120 ? 4. What is the predicted value when the horsepower is 450 ? 5. What is the predicted value when the horsepower is 200 ?

Answers

a) The slope of the regression line is approximately -0.0858.

2. The y-intercept of the regression line is approximately 45.04.

3. The horsepower is 120 is approximately 34.744 miles per gallon (MPG).

4.  The horsepower is 450 is approximately 6.43 miles per gallon (MPG).

5. The horsepower is 200 is approximately 27.88 miles per gallon (MPG).

To compute the slope and y-intercept of the regression line, we need to use the formulas:

Slope (b) = (nΣXY - ΣXΣY) / (nΣX² - (ΣX)²)

Y-Intercept (a) = (ΣY - bΣX) / n

Given the following values:

n = 8 (number of data points)

ΣX = 1970 (sum of X values)

ΣY = 191 (sum of Y values)

ΣX² = 571900 (sum of squared X values)

ΣY² = 5355 (sum of squared Y values)

ΣXY = 39600 (sum of product of X and Y values)

Let's calculate the slope and y-intercept:

1. Compute the slope of the regression line:

b = (nΣXY - ΣXΣY) / (nΣX² - (ΣX)²)

 = (8 * 39600 - 1970 * 191) / (8 * 571900 - 1970²)

 = (316800 - 376370) / (4575200 - 3880900)

 = -59570 / 694300

 ≈ -0.0858

The slope of the regression line is approximately -0.0858.

2. Compute the y-intercept:

a = (ΣY - bΣX) / n

 = (191 - (-0.0858) * 1970) / 8

 = (191 + 169.326) / 8

 = 360.326 / 8

 ≈ 45.04

The y-intercept of the regression line is approximately 45.04.

3. To predict the value when horsepower is 120:

Y = a + bX

 = 45.04 + (-0.0858) * 120

 = 45.04 - 10.296

 ≈ 34.744

The predicted value when the horsepower is 120 is approximately 34.744 miles per gallon (MPG).

4. To predict the value when horsepower is 450:

Y = a + bX

 = 45.04 + (-0.0858) * 450

 = 45.04 - 38.61

 ≈ 6.43

The predicted value when the horsepower is 450 is approximately 6.43 miles per gallon (MPG).

5. To predict the value when horsepower is 200:

Y = a + bX

 = 45.04 + (-0.0858) * 200

 = 45.04 - 17.16

 ≈ 27.88

The predicted value when the horsepower is 200 is approximately 27.88 miles per gallon (MPG).

Learn more about  regression line here:

https://brainly.com/question/29753986

#SPJ11

Stature data collected on all current NBA players has a mean of 6

7
′′
and standard deviation of 3.4
′′
. - What are the 5th and 95th percentile statures within this population? - LeBron James is 6

8
′′
. Yao Ming is 7

6
′′
. What are the percentiles of their statues among NBA players?

Answers

LeBron James is in the 94th percentile and Yao Ming is in the 99th percentile among NBA players based on their statures.

To find the 5th and 95th percentile statures within the population of NBA players, we use the information given: mean = 6'7" and standard deviation = 3.4". Using a statistical table or calculator, we can determine that the 5th percentile stature is below 6'1", while the 95th percentile stature is above 7'9".

For LeBron James, with a stature of 6'8", we compare his height to the population of NBA players. With a height greater than approximately 94% of NBA players, he falls within the 94th percentile.

For Yao Ming, with a stature of 7'6", his height is greater than approximately 99% of NBA players, placing him within the 99th percentile.

Therefore, LeBron James is in the 94th percentile and Yao Ming is in the 99th percentile among NBA players based on their statures.

Learn more about percentile here:

https://brainly.com/question/31654670

#SPJ11

Givn that kx³ + 2x² + 2x +3 and kx³ - 2x +9 have a common factor, what are the possible values of k?​

Answers

There are infinite possible values of k.

To find the possible values of k, we need to determine the common factors of the two given polynomials.

Let's denote the first polynomial as P(x) = kx³ + 2x² + 2x + 3 and the second polynomial as Q(x) = kx³ - 2x + 9.

For these polynomials to have a common factor, it means that there exists a polynomial R(x) such that both P(x) and Q(x) can be expressed as the product of R(x) and another polynomial S(x). Mathematically, this can be written as P(x) = R(x) * S(x) and Q(x) = R(x) * T(x).

Since P(x) and Q(x) have a common factor, their common factor must also be a factor of their difference. Therefore, we can compute their difference as follows:

P(x) - Q(x) = (kx³ + 2x² + 2x + 3) - (kx³ - 2x + 9)

= kx³ + 2x² + 2x + 3 - kx³ + 2x - 9

= 2x² + 4x - 6

For P(x) - Q(x) to be divisible by R(x), the remainder should be zero. In other words, 2x² + 4x - 6 should be divisible by R(x).

Now, we need to determine the factors of 2x² + 4x - 6. By factoring this quadratic expression, we get (2x + 6)(x - 1).

Therefore, the possible values of k would be such that (2x + 6)(x - 1) is a factor of both P(x) and Q(x). For this to happen, we need to find the values of x that satisfy (2x + 6)(x - 1) = 0.

Setting each factor equal to zero, we have two possible values of x: x = -3 and x = 1.

Now, substituting these values of x back into the original polynomials, we can solve for k:

For x = -3:

P(-3) = k(-3)³ + 2(-3)² + 2(-3) + 3

= -27k + 18 - 6 + 3

= -27k + 15

Q(-3) = k(-3)³ - 2(-3) + 9

= -27k + 6 + 9

= -27k + 15

For x = 1:

P(1) = k(1)³ + 2(1)² + 2(1) + 3

= k + 2 + 2 + 3

= k + 7

Q(1) = k(1)³ - 2(1) + 9

= k - 2 + 9

= k + 7

Since P(-3) = Q(-3) and P(1) = Q(1), we can conclude that k + 7 = -27k + 15 and k + 7 = k + 7.

Simplifying these equations, we have:

-27k + k = 8

0 = 0

Since the equation 0 = 0 is always true, it means that k can be any real number.

For more such questions on infinite

https://brainly.com/question/30221799

#SPJ8

A father is 30 year older than his son in 12 year the man will be three times as older as his son find the present age of the Son​

Answers

Answer:

Let f = father's present age and s = son's present age.

f = s + 30

f + 12 = 3(s + 12)

s + 30 + 12 = 3s + 36

s + 42 = 3s + 36

2s = 6, so s = 3 and f = 33

Given the system of inequalities below, determine the shape of the feasible region and find the corner points of the feasible region. Give the shape as "triangle". "quadrilateral", or "unbounded". Report your corner points starting with the one which has the smallest x-value. If more than one corner point has the same smallest x-value, start with the one that has the smallest y-value. Proceed clockwise from the first corner point. Leave any unnecessary answer spaces blank. ⎩



x+y≥6
4x+y≥10
x≥0
y≥0

The shape of the feasible region is (a) The first corner point is ( The second corner point is ( The third corner point is ( The fourth corner point is

Answers

The shape of the feasible region is a quadrilateral.

The corner points of the feasible region are as follows:

(0, 6)

(2, 2)

(5, 1)

(10, 0)

To determine the corner points of the feasible region, we can solve the system of inequalities simultaneously.

From the inequality x + y ≥ 6, we have y ≥ 6 - x.

From the inequality 4x + y ≥ 10, we have y ≥ 10 - 4x.

The constraints x ≥ 0 and y ≥ 0 represent non-negativity conditions.

To find the corner points, we need to find the intersection points of the lines defined by the inequalities.

At the intersection of y = 6 - x and y = 10 - 4x, we have:

6 - x = 10 - 4x

3x = 4

x = 4/3

Substituting back into y = 6 - x, we get y = 6 - 4/3 = 14/3.

Therefore, the first corner point is (4/3, 14/3) or approximately (1.33, 4.67).

At the intersection of y = 6 - x and x = 0, we have:

y = 6 - 0

y = 6.

Therefore, the second corner point is (0, 6).

At the intersection of y = 10 - 4x and x = 0, we have:

y = 10 - 4(0)

y = 10.

Therefore, the third corner point is (0, 10).

At the intersection of y = 10 - 4x and y = 0, we have:

0 = 10 - 4x

4x = 10

x = 10/4 = 5/2 = 2.5.

Therefore, the fourth corner point is (2.5, 0).

These four points form the corner points of the feasible region, which is a quadrilateral.

Learn more about shape  from

https://brainly.com/question/25965491

#SPJ11

If
m
x

=21 then find
4
x+3m

Answers

Given the expression mx = 21, so x = 21/m, then the solution of 4x + 3m is 105.

We are given that mx = 21. This means that m × x = 21. We can solve for x by dividing both sides by m, which gives us x = 21/m.

We are asked to find 4x + 3m. Substituting x = 21/m into the expression, we get 4 × (21/m) + 3m = 84/m + 3m = (84 + 3m²)/m = 105.

Therefore, if mx = 21, then 4x + 3m = 105.

The expression 4x + 3m is a linear expression in x and m. This means that the expression is a straight line when plotted on a graph. The slope of the line is 4, and the y-intercept is 3m.

The value of 4x + 3m depends on the values of x and m. In this case, we are given that mx = 21, so x = 21/m. Substituting this value into the expression, we get 4x + 3m = 84/m + 3m = 105.

Learn more about straight line here:

brainly.com/question/31693341

#SPJ11

A 3-cm-tall object is 15 cm in front of a lens, which creates a 6 -cm tall image on the opposite side of the lens. (Do this problem without resorting to a calculator.) 25% Part (a) What can you say about the image? Inverted, Real ∙ Correct? △25% Part (b) How far, in centimeters, from the lens is the image? A 25\% Part (c) What is the focal length of the lens? A 25\% Part (d) What kind of lens is this?

Answers

A 3-cm-tall object is 15 cm in front of a convex lens, creating a 6-cm tall, inverted, and real image 7.5 cm behind the lens. The focal length of the lens is 7.5 cm.

(a) The image is inverted and real, since it is formed on the opposite side of the lens and is smaller than the object.

(b) Using the thin lens equation, we can relate the object distance (u), image distance (v), and focal length (f) of the lens as:

1/f = 1/v - 1/u

We are given that the object distance is u = -15 cm (since the object is in front of the lens), and the image height is h' = -6 cm (since the image is inverted). We also know that the magnification of the lens is given by:

m = h'/h = -6/3 = -2

Since the magnification is negative, this indicates an inverted image.

Using the magnification relation for a thin lens, we can relate the image distance to the object distance and magnification as:

m = -v/u

Substituting the given values, we have:

-2 = -v / (-15)

Solving for v, we get:

v = -7.5 cm

Therefore, the image is located 7.5 cm from the lens on the opposite side.

(c) Rearranging the thin lens equation, we get:

1/f = 1/v - 1/u

Substituting the given values for v and u, we have:

1/f = 1/(-7.5) - 1/(-15)

Simplifying the right-hand side, we get:

1/f = 2/15

Solving for f, we get:

f = 7.5 cm

Therefore, the focal length of the lens is 7.5 cm.

(d) Since the image is real and inverted, and the focal length is positive, we can conclude that this is a converging or convex lens.

know more about focal length here: brainly.com/question/2194024

#SPJ11

T
√ 8
B
D
C
Help Marc improve his score.
Slope of AB =
X
4
Slope of BC= 0
2
Slope of CD =
Slope of DA= 0
length of AB=√ 20
length of BC = 4
length of CD= √20
length of DA = 4
Marc says that ABCD is a parallelogram because "the
slopes match and the sides match."
Marc's teacher gave him a score of 3.5/5 for this
answer.
How would you help Marc improve his answer? Try to
improve Marc's answer to get a 5/5.

Answers

To improve Marc's answer to get a 5/5 is for him to mention that a parallelogram requires both pairs of opposite sides to be parallel and equal in length.

How to improve Mark's score

Marc's claim that the slopes of AB and CD and BC and DA coincide is only partially accurate.

It appears like the opposing sides are parallel as a result. The lengths of AB and CD are both 20, and those of BC and DA are both 4. Marc also correctly says that the lengths of these elements are 4 and 4.

These parallel side lengths also suggest a potential parallelogram. Marc should clarify, however, that a parallelogram necessitates that both pairs of opposite sides be parallel and equal in length.

Marc will give a more thorough and correct explanation by incorporating this extra information, receiving a perfect score of 5/5.

Learn more about parallelograms at: https://brainly.com/question/10744696

#SPJ1

Which of the following is not true of the Power Pivot user interface? Group of answer choices It allows you to edit the data in any of the tables, just as you would in an Excel worksheet. It allows you to use DAX formulas to create calculated columns in a table. It allows you to use DAX formulas to create measures that can be used in the Values area of a pivot table. It allows you to create relationships between tables.

Answers

The statement "It allows you to edit the data in any of the tables, just as you would in an Excel worksheet" is not true of the Power Pivot user interface.

Power Pivot is a data modeling and analysis tool available in Microsoft Excel. It enhances Excel's capabilities by providing advanced data manipulation and analysis features. However, Power Pivot does not allow direct editing of data in tables within its user interface. The primary purpose of Power Pivot is to create and manage data models, which involve importing and transforming data from various sources.

In Power Pivot, you can connect to external data sources and import data into the data model. Once the data is imported, you can apply various transformations, calculations, and aggregations using DAX (Data Analysis Expressions) formulas. DAX formulas are used to create calculated columns and measures, which provide additional insights and calculations based on the imported data.

Power Pivot also allows you to create relationships between tables, enabling you to establish connections and associations between different data sources or related tables. These relationships help in performing accurate analysis and building efficient pivot tables.

While Power Pivot provides a powerful environment for data modeling and analysis, it does not provide a direct interface for editing data within tables. To edit the underlying data, you would typically make changes in the original data sources or use Excel's native data editing capabilities outside of the Power Pivot environment.

Learn more about calculations here:

https://brainly.com/question/30151794

#SPJ11

The average number of field mice per acre in a wheat field is estimated
to be 2.5. Assume that the number of mice found per acre follows Pois-
son distribution and then, find the probability that at least 2 field mice are
found.

Answers

The given problem belongs to Poisson distribution. The expected value of λ is given by 2.5, so the probability of at least 2 mice found per acre can be calculated as 0.7769.

Given that the average number of field mice per acre in a wheat field is 2.5. And we are supposed to find the probability that at least 2 field mice are found.

This is a problem related to Poisson distribution.Poisson distribution is applied when the event is rare and time is constant, and is used to find the probability of occurrence of the event.

In this problem, the expected value of λ is given by 2.5, since we have to calculate the probability of at least 2 mice, we can use Poisson distribution and P(X≥2) can be calculated as follows:

Here, λ = 2.5P(X≥2) = 1 - P(X=0) - P(X=1) = 1 - e^(-λ) - λ*e^(-λ)

By substituting the value of λ, we can calculate the probability as:P(X≥2) = 0.7769Therefore, the probability that at least 2 field mice are found is 0.7769.

To learn more about Poisson distribution

https://brainly.com/question/30388228

#SPJ11

Other Questions
Question 18: Part A- Does America have a sustainable competitive advantage in agribusiness? Explain. Part B- Are free markets a prerequisite to America retaining its competitive advantage in world agriculture? Explain. all of the statements below describe the flipped classroom except Solve x 1 =2x 1 4x 2 x 2 =5x 1 +3x 2 with initial conditions x 1 (0)=1 x 2 (0)=1 and thus show that x 1 (t)0 x 2 (t)0 as t[infinity]. which of the following statements correctly describe the behavior of different types of substances in aqueous solution? select all that apply.a. A heterogeneous mixture contains two or more different phases.b. The composition of any mixture is variable.c. Differences in particle size account for the main differences between solutions and colloids Determine for true value and approximation with euleur method (h=1;h=0.1;and h=0.01) for y(3) in the following ODE: a x dxdy=4y;y(1)=2 b 3 dxdy12y=3;y(0)=0 Corporate Entrepreneurship (CE) has long been recognized as a potentially viable means for promoting and sustaining corporate competitiveness. Demonstrate how CE sustains an organizations competitiveness. advantages and disadages of organizations designed for efficient performance and those designed for continuous learning A metallurgist begins with 1250 grams of vanadium (pb5(vo4)3cl) and ends up with 135 g of pure vanadium and 950 g of pure lead. The percent composition of vanadium in the ore is as an aid in solving this problem. A portable electric heater uses 16.2 A of current. The manufacturer recommends that an extension cord attached to the heater receive no more than 2.92 W of power per meter of length. What is the smallest radius of copper (resistivity 1.7210 8 m ) wire that can be used in the extension cord? (Note: An extension cord contains two wires.) Number Units You may need to use the appropriate appendix table or technology to answer this question.Consider the following hypothesis test.H0: 20Ha: < 20A sample of 50 provided a sample mean of 19.4. The population standard deviation is 2Using = 0.05,State the critical values for the rejection rule. (Round your answer to two decimal places. If the test is one-tailed, enter NONE for the unused tail.)test statistic test statistic . A square matrix A is called an involution if AA=I. Prove that the only possible eigenvalues of an involution are +1 and 1. Find the derivative of the function.f(x)=ln(x+4)f(x)= Why is performance the defining metric for Strategic Management ? in order to pass the three tests of corporate advantage, what must executives do? A highway bridge is being considered for replacement. The new bridge would cost $X and would last for 20 years. Annual maintenance costs for the new bridge are estimated to be $23,000. People will be charged a toll of $0.27 per car to use the new bridge. Annual car traffic is estimated at 390,000 cars. The cost of collecting the toll consists of annual salaries for five collectors at $10,000 per collector. The existing bridge can be refurbished for $1,800,000 and would need to be replaced in 20 years. There would be additional refurbishing costs of $65,000 every five years and regular annual maintenance costs of $19,000 for the existing bridge. There would be no toll to use the refurbished bridge. If MARR is 12% per year, what is the maximum acceptable cost (X) of the new bridge? Click the icon to view the interest and annuity table for discrete compounding when the MARR is 12% per year. Choose the correct answer below. A. The maximum acceptable cost of the new bridge is $2,626,337. B. The maximum acceptable cost of the new bridge is $2,183,180. C. The maximum acceptable cost of the new bridge is $1,770,343. D. The maximum acceptable cost of the new bridge is $2,252,867. E. The maximum acceptable cost of the new bridge is $1,466,339 II. FAFA Motors is planning to introduce its new sports bike into the market. In the first step, it collects data on prices, designs, features, and performance of sports bikes manufactured by other companies from their respective Web sites. Then as a second step, FAFA motors develop a survey to have insights into the potential market. 1. Explain what type of data is being used at the first step by FAFA motors in this case. (2 marks) 2. What are the advantages and limitations of this type of data? State two for each. (4 marks) 3. Based on the second step that is being made by FAFA Motors, Identify the type of research that the manufacturer use. Is it qualitative or quantitative? Have you ever bought something to impress someone? Did itwork? The Wet Holiday Company specializes in the provision of holidays which involve water sports of various types. There are three major divisions with the following lines ofbusiness: -boat holidays on canals - villa holidays in various parts of the Mediterranean which involve sailing insome way -canoeing holidays in France Wet Holiday feel that they are particularly appealing to a young active market and thathaving the facility for customers to book via the web is essential. They call in ITconsultants to advise them on their IT strategy. The consultants advise them thatbefore they can have a web presence, they need to have a conventional IT-basedbooking system to support their telesales operation first. Because of the specializednature of their business, an off-the-shelf application would not be suitable and that theywould need to have a specially. written software application, based on a client-serverarchitecture. The top priority needs to be given for a system to support villa holiday bookings becausethis has the largest number of customers and generates the mostrevenue. Wet Holiday have some in-house IT development staff, but these are inexperienced in client server technology. To meet this short-fall, contractors are employed. It turns out that development takes much longer than planned. Much of this delayoccurs at acceptance testing when the users find many errors and performanceshortcomings, which require extensive rework. Part of the problem relates to gettingthe best performance out of the new architecture, which has a particular impact on response times which are initially unacceptable to staff who are dealing with customersover the phone. The contractors are not closely monitored and some of the code thatthey produce is found to have manycareless mistakes and to be poorly structured anddocumented. This makes it difficult to make changes to the software after thecontractors have left onthe expiry of their contracts. The villa booking system can only be implemented at the beginning of a holidayseason and the deadline for the beginning of the 2002 to 2003 season is missed.leading to a 12 month delay in theimplementation. The delay in implementation seemsto encouragethe users to ask for further modifications to the original requirementswhich adds even more to development costs. The delays in implementing this application mean that the other scheduled IT development for other lines of business have to be put back. Managers of customer-facing business functions at Wet Holiday are suggesting that the whole IT functionshould be completely outsourced. a.Identify the problems that were faced by Wet Holiday, and describe actions that could have been taken to avoid or reduce them. b.Use your findings in (a) to create a riskchecklist for future projects. Identify five strategies a company can use to stop workplacebullying. Out of the five strategies you chose, which one do youthink is most effective in eliminating workplace bullying andexplain why. PLEASE REPLY WITHIN 30 MINS ITS URGENTDiscuss in details the pricing strategy pillars, then explainhow does the internet redefine a pricing options?