A(n) _______________ absorbs energy and then emits electromagnetic radiation based on its _______________. Classical physics predicted that at a high enough temperature, _______________ light would be emitted. Instead, white light was emitted, resulting in the ultraviolet _______________. The photoelectric effect occurs when light shining on a metal creates a(n) _______________. However, only light of a certain minimum _______________ causes electrons to flow. Gas atoms excited by an electric current emit bands of colors of light in a(n) _______________. Each narrow band of light is associated with _______________ of a specific energy.

Answers

Answer 1

Answer:

Blackbody radiator, temperature, ultraviolet, catastrophe, electric current, frequency, spectrum, photons

Explanation:

# a p e x

1 and 2 ) A blackbody radiator is an object that absorbs energy, then emits electromagnetic radiation based on the temperature of the object. This comes directly from the definition in the passages.

3 and 4 ) Ultraviolet catastrophe describes when old physicists assumed as frequency increased the waves would go from visible to ultraviolet because that is what comes next on the spectrum. Instead of this happening, the light became white light and it was an apparent 'catastrophe'

Answer 2

Appropriate words for blank position shown below,

Blackbody radiatortemperature ultravioletcatastropheelectric currentfrequency spectrum photons

A blackbody radiator is defined as an object that absorbs all electromagnetic radiation that falls on it at all frequencies over all angles of incidence.

Ultraviolet light is a type of electromagnetic radiation that makes black-light posters glow

A movement of positive or negative electric particles produce current.

Frequency is defined as the number of cycles or vibrations undergone during one unit of time by a body in periodic motion.

Photons are particles which transmit light.

Learn more:

https://brainly.com/question/18533748


Related Questions

What computer measures physical quantities?​

Answers

Answer:

Three Types of Computer The Computer are classified into three main types:: • Analog Computers • Digital Computers • Hybrid Computers (Analog + Digital) Analog Computers:: Analog Computer measures “Physical Quantities” for example Temperature, Voltage, Pressure, and Electric Current.

Flapping flight is very energy intensive. A wind tunnel test
on an 89 g starling showed that the bird used 12 W of
metabolic power to fly at 11 m/s. What is its metabolic power for starting flight?

Answers

Answer:

The metabolic power for starting flight=134.8W/kg

Explanation:

We are given that

Mass of starling, m=89 g=89/1000=0.089 kg

1 kg=1000 g

Power, P=12 W

Speed, v=11 m/s

We have to find the metabolic power for starting flight.

We know that

Metabolic power for starting flight=[tex]\frac{P}{m}[/tex]

Using the formula

Metabolic power for starting flight=[tex]\frac{12}{0.089}[/tex]

Metabolic power for starting flight=134.8W/kg

Hence, the metabolic power for starting flight=134.8W/kg

calculate the pressure of water having density 1000 kilo per metre square at a depth of 20 m inside the water​

Answers

Answer:

the pressure of the water at the given depth is 196,200 N/m².

Explanation:

Given;

density of the water, ρ = 1000 kg/m³

depth of the water, h = 20 m

acceleration due to gravity, g = 9.81 m/s²

The pressure at the given depth of the water is calculated as;

P = ρgh

P = 1000 x 9.81 x 20

P = 196,200 N/m²

Therefore, the pressure of the water at the given depth is 196,200 N/m².

I’m a photoelectric effect, which property of the incident light determines how much kinetic energy the ejected electrons have ?
A) brightness
B) frequency
C) size of the beam
D) none of the above

Answers

Answer:

b = frequency

Consider a piston filled with 3 mols of an ideal gas, kept at a constant temperature 290 K. We slowly compress the gas starting at 2 m3 and ending at 1 m3. How much work do we need to do on the gas to perform this operation

Answers

Answer: [tex]-5013.65\ J[/tex]

Explanation:

Given

No of moles [tex]n=3[/tex]

Temperature [tex]T=290\ K[/tex]

Initial volume [tex]V_1=2\ m^3[/tex]

Final volume [tex]V_2=1\ m^3[/tex]

Work done in constant temperature process is

[tex]W=nRT\ln \left(\dfrac{V_2}{V_1}\right)[/tex]

Insert the values

[tex]\Rightarrow W=3\times 8.314\times 290\ln \left (\dfrac{1}{2}\right)\\\\\Rightarrow W=-870\times 8.314\times \ln (2)\\\Rightarrow W=-5013.65\ J[/tex]

point charges q1=50 uc and q2=-25 uc are placed 1 m apart. what is the force on a third chare q3=2 uc placed midway between q1 and q2? where must q3 of the preceding problem be placed so that the net force on it is zero?

Answers

Answer:

d = -1 m

The negative sign indicates that the charge from that force of the space of the two spheres.

Explanation:

That is a problem of electric forces, given by Coulomb's law

          F = [tex]k \frac{ q1q2}{r^2}[/tex]

We use that charges of the same sign repel and charges of different signs do not attract, so the net force is

           ∑ = F₁₃ + F₂₃

          F_ {net} = [tex]k \frac{q_1q_3}{r_{13}^2} + k \frac{q_2q_3}{ r_{23}^}[/tex]

a) the charge is placed at the midpoint between the other two

          r₁₃ = r₁₂ = R = ½ m = 0.5m

         F_ {net} =[tex]\frac{k}{R^2 } \ q3 ( q1+q2)[/tex]

calculate us

          F_ {net} = 9 10⁹ / 0.5²   2 10⁻⁶ (50 -25) 10⁻⁶

          F_ {net} = 1,800 N

b) where must be placed q3 so that the force is zero

for this case the charge q3 is outside the spheres

          ∑ F = 0

          F₁₁₃ = F₂₃

          k q_1 / r_{13}² = k q₂ q₃ / r₂₃²

          q₁/ r₁₂²   = q₂ / r₂₃²

suppose the distance

          r₁₂ = d

the he other sphere is

          r₂₃ = d + 1

             

we substitute

          q₃ / d² = q₂ / (d + 1) ²

          (d + 1) ² = q₂ / q₃ d²

           d² (1 - q₂/ q₃) + 2d + 1 = 0

we solve the equation of a second

            d = [-2 + [tex]\sqrt{2^2 - 4 1 ( 1+25/50}[/tex] ] / 2

             d = -2 /2

             d = -1 m

The negative sign indicates that the charge from that force of the space of the two spheres.

Joule is a SI unit of power
Measuring cylinder is used to measure the volume of a liquid

Answers

Answer:

The SI unit of power is watt

If a boy lifts a mass of 6kg to a height of 10m and travels horizontally with a constant velocity of 4.2m/s, calculate the work done? Explain your answer.

Answers

Answer:

W = 641.52 J

Explanation:

The work done here will be the sum of potential energy and the kinetic energy of the boy. Here potential energy accounts for vertical motion part while the kinetic energy accounts for the horizontal motion part:

[tex]Work\ Done = Kinetic\ Energy + Potential\ Energy\\\\W = K.E +P.E\\\\W = \frac{1}{2}mv^2+mgh\\\\[/tex]

where,

W = Work Done = ?

m = mass = 6 kg

v = speed = 4.2 m/s

g = acceleration dueto gravity = 9.81 m/s²

h = height = 10 m

Therefore,

[tex]W = \frac{1}{2}(6\ kg)(4.2\ m/s)^2+(6\ kg)(9.81\ m/s^2)(10\ m)[/tex]

W = 52.92 J + 588.6 J

W = 641.52 J

any four difference between speed and acceleration ​

Answers

Speed:

Measured in distance / timeIt tells the speed of a bodyIt is a scalar quantitySpeed is always positiveIt's unit is meter per second

Acceleration:

Measured in velocity / timeIt tells the change in the velocityImplied on change in a velocityIt is a vector quantityIt's unit is meter per second square

Define hydropower or hydroelectric power ?
No Spam..

Answers

[tex]\:[/tex]

Hydroelectric power, also called hydropower is the electricity produced from generators driven by turbines that convert the potential energy of falling or fast-flowing water into mechanical energy.

Answer:

Hydroelectric power/hydropower -  electricity produced by a hydraulic source, specifically energy generated falling or flowing water

An electric fan is running on HIGH. After fan has been running for 1.3 minutes, the LOW button is pushed. The fan slows down to 109 rad/sec in 1.87 seconds. The blades of the fan have a diameter of 6.7 meters and their deceleration rate is 4.7 rad/sec2.
What was the initial angular speed of the fan in rev/sec?
ωi =

Answers

Answer:

    wo = 18.75 rev / s

Explanation:

This is an exercise in endowment kinematics, it indicates that the final angular velocity is w_f = 109 rad / s, the time to reach this velocity is t = 1.87 s and the deceleration a = 4.7 rad / s²

         w_f = w₀ - a t

         w₀ = w_f + a t

         w₀ = 109 + 4.7 1.87

         w₀ = 117.8 rad / s

let's reduce to revolutions / s

         w₀ = 117.8 rad / s (1 rev / 2pi rad)

         w₀ = 18.75 rev / s

At time t=0 a positively charged particle of mass m=3.57 g and charge q=9.12 µC is injected into the region of the uniform magnetic B=B k and electric E=−E k fields with the initial velocity v=v0 i. The magnitudes of the fields: B=0.18 T, E=278 V/m, and the initial speed v0=2.1 m/s are given. Find at what time t, the particle's speed would become equal to v(t)=3.78·v0:

Answers

Answer:

10.78 s

Explanation:

The force on the charge is computed by using the equation:

[tex]F^{\to}= qE^{\to} +q (v^{\to} + B^{\to}) \\ \\ F^{\to} = (9.12 \times 10^{-6}) *278 (-\hat k) +9.12 *10^{-6} *2.1 *0.18 (\hat i * \hat k) \\ \\ F^{\to} = -2.535 *10^{-3} \hat k -3.447*10^{-6} \hat j[/tex]

F = ma

[tex]a ^{\to}= \dfrac{F^{\to}}{m}[/tex]

[tex]a ^{\to}= \dfrac{-1}{3.57\times 10^{-3}}(2.535*10^{-3}\hat k + 3.447*10^{-6} \hat j)[/tex]

[tex]a ^{\to}=-0.710 \hat k -9.656*10^{-4} \hat j[/tex]

At time t(sec; the partiCle velocity becomes [tex]v(t) = 3.78 v_o[/tex]

The velocity of the charge after the time t(sec) is expressed by using the formula:

[tex]v^{\to}= v_{o \ \hat i} + a^{\to }t \\ \\ \implies (2.1)\hat i -0.710 t \hat k -9.656 \times 10^{-4} t \hat j = 3.78 v_o \\ \\ \implies (2.1)^2 +(0.710\ t)^2+ (9.656 *10^{-4}t )^2 = (3.78 *2.1^2 \\ \\ \implies 4.41 +0.5041 t^2 +9.324*10^{-7} t^2 = 63.012 \\ \\ \implies 4.41 +0.5041 t^2 = 63.012\\ \\ 0.5041t^2 = 63.012-4.41 \\ \\ t^2 = \dfrac{58.602}{0.5041} \\ \\ t^2 = 116.25 \\ \\ t = \sqrt{116.25} \\ \\ \mathbf{t = 10.78 \ s}[/tex]

Condensation is the process of ____________________.
a. planetesimals accumulating to form protoplanets.
b. planets gaining atmospheres from the collisions of comets.
c. clumps of matter adding material a small bit at a time.
d. clumps of matter sticking to other clumps.
e. clouds formed from volcanic eruptions.

Answers

D. I hope my answer helps you!

A velocity of ship A relative to ship B is 10m/s in the direction N45E . If the velocity of B is 20m/s in the direction N60W . Find the velocity of ship A and direction.​

Answers

Answer:

ewjefkljlajwawk;dlqa;wdka:WDKkjlhgzkljwidaJLdkjALIw

Explanation:

A spherical piece of candy is suspended in flowing water. The candy has a density of 1950 kg/m3 and has a 1.0 cm diameter. The water velocity is 1.0 m/s, the water density is assumed to be 1000.0 kg/m3, and the water viscosity is 1.010-3 kg/m/s. The diffusion coefficient of the candy solute in water is

Answers

The question is incomplete. The complete question is :

A spherical piece of candy is suspended in flowing water. The candy has a density of 1950 kg/m3 and has a 1.0 cm diameter. The water velocity is 1.0 m/s, the water density is assumed to be 1000.0 kg/m3, and the water viscosity is 1.0x10-3 kg/m/s. The diffusion coefficient of the candy solute in water is 2.0x10-9 m2/s, and the solubility of the candy solute in water is 2.0 kg/m3. Calculate the mass transfer coefficient (m/s) and the dissolution rate (kg/s).

Solution :

From flow over sphere, the mass transfer equation can be written as :

[tex]$Sh = 2 + 0.6 Re^{1/2} Sc^{1/3}$[/tex]

where, Sherood number, [tex]$Sh = \frac{K_L d}{D_{eff}}$[/tex]

            Reynolds number, [tex]$Re=\frac{Vd\rho}{\mu}$[/tex]

            Schmid number, [tex]$Sc= \frac{\mu}{\rho D_{eff}}$[/tex]

So,

[tex]$\frac{K_L d}{D_{eff}}=2+0.6 \left( \frac{V d \rho}{\mu} \right)^{1/2} \ \left( \frac{\mu}{\rho D_{eff}} \right)^{1/3}$[/tex]

Diameter, d = 1 cm = [tex]$1 \times 10^{-2}$[/tex] m

                 V = 1 m/s

                 [tex]$\rho = 1000 \ kg/m^3$[/tex]

                 [tex]$\mu = 10^{-3} \ kg/m/s$[/tex]

                 [tex]$D_{eff} = 2 \times 10^{-9} \ m^2/s$[/tex]

[tex]$\frac{K_L \times 10^{-2}}{2 \times 10^{-9}}=2+0.6 \left( \frac{1 \times 10^{-2} \times 10^3}{10^{-3}} \right)^{1/2} \ \left( \frac{10^{-3}}{10^3 \times 2 \times 10^{-9}} \right)^{1/3}$[/tex]

[tex]$K_L \times 5 \times 10^6=478.22$[/tex]

[tex]$K_L=9.5644 \times 10^{-5}$[/tex] m/s

So the mass transfer coefficient is 9.5644 [tex]$\times 10^{-5}$[/tex] m/s. It is given solubility,

[tex]$\Delta C = 2 \ kg/m^3$[/tex]

[tex]$N = Md^2 \times \Delta C \times K_L$[/tex]

[tex]$N= M \times (10^{-2})^2 \times 2 \times 9.5644 \times 10^{-5}$[/tex]

[tex]$N= 6 \times 10^{-8}$[/tex] kg/s (dissolution rate)

A car is traveling at 50 mi/h when the brakes are fully applied, producing a constant deceleration of 24 ft/s2. What is the distance (in ft) traveled before the car comes to a stop? (Round your answer to one decimal place.)

Answers

The car has initial speed 50 mi/h ≈ 73 ft/s, so it covers a distance x such that

0² - (73 ft/s)² = 2 (-24 ft/s²) x

==>   x111.0 ft

HELP MEEEEEEE PLEASEEEEEEEEE

Answers

Answer:

D) Q = 80 C

Explanation:

Given;

current flowing in the light bulb, I = 2A

time of current flow, t = 40,000 ms = 40,000 x 10⁻³ s = 40 s

The quantity of the charge is calculated as;

Q = It

where;

Q is the quantity of the charge (Coulombs)

Q = (2 ) x (40)

Q = 80 C

Therefore, the quantity of charge flowing in the circuit is 80 C

D) Q = 80 C

Determine the magnitude as well as direction of the electric field at point A, shown in the above figure. Given the value of k = 8.99 × 1012N/C. where, d= 11 cm Q= 12.5 C

Answers

Answer:

The electric field is 9.3 x 10^12 N/C and the direction is away from the charge.

Explanation:

charge, Q = 12.5 C

distance, d = 11 cm = 0.11 m

Let the electric field is E.

[tex]E =\frac{K Q}{d^2}\\\\E = \frac{9\times 10^9\times 12.5}{0.11\times 0.11}\\\\E = 9.3\times 10^{12} N/C[/tex]

The direction of electric filed is away from the charge.

Which of the following groups is the largest ?

population
community
ecosystem
biome

Answers

Answer:

B. Community

Took science classes for 6 years now

Two friends, Al and Jo, have a combined mass of 194 kg. At the ice skating rink, they stand close together on skates, at rest and facing each other. Using their arms, they push on each other for 1 second and move off in opposite directions. Al moves off with a speed of 7.9 m/sec in one direction and Jo moves off with a speed of 6.7 m/sec in the other. You can assume friction is negligible.
What is Al's mass? 110.58 What is Jo's mass? If you assume the force is constant during the 1 second they are pushing on each other, what is the magnitude of the force of Al on Jo? If you assume the force is constant during the 1 second they are pushing on each other, what is the magnitude of the force of Jo on Al?

Answers

Answer:

The mass of Al is 89.027 kilograms.

The mass of Jo is 104.973 kilograms.

The magnitude of the force of Jo on Al is 596.481 newtons.

Explanation:

Given the absence of external forces, this situation can be described will by Principle of Linear Momentum Conservation and Impact Theorem on each skater:

Al:

[tex]m_{1}\cdot (v_{1, f}-v_{1, o}) = -F \cdot \Delta t[/tex] (1)

Jo:

[tex]m_{2}\cdot (v_{2,f}-v_{2,o}) = F\cdot \Delta t[/tex] (2)

Total mass:

[tex]m_{1} + m_{2} = 194\,kg[/tex]

Where:

[tex]m_{1}[/tex], [tex]m_{2}[/tex] - Masses of the skaters, in kilograms.

[tex]v_{1,o}[/tex], [tex]v_{1,f}[/tex] - Initial and final velocities of Al, in meters per second.

[tex]v_{2,o}[/tex], [tex]v_{2,f}[/tex] - Initial and final velocities of Jo, in meters per second.

[tex]F[/tex] - Impact force between skaters, in newtons.

[tex]\Delta t[/tex] - Impact time, in seconds.

If we know that [tex]v_{1,o} = 0\,\frac{m}{s}[/tex], [tex]v_{1,f} = -7.9\,\frac{m}{s}[/tex], [tex]\Delta t = 1\,s[/tex], [tex]v_{2,o} = 0\,\frac{m}{s}[/tex] and [tex]v_{2,f} = 6.7\,\frac{m}{s}[/tex], then the masses of the skaters are, respectively:

[tex](194-m_{2})\cdot (-7.9) = -F[/tex] (1b)

[tex]m_{2} \cdot 6.7 = F[/tex] (2b)

(2b) in (1b):

[tex](194-m_{2})\cdot (-7.9) = -m_{2}\cdot 6.7[/tex]

[tex]-1532.6 +7.9\cdot m_{2} = -6.7\cdot m_{2}[/tex]

[tex]14.6\cdot m_{2} = 1532.6[/tex]

[tex]m_{2} = 104.973\,kg[/tex]

[tex]m_{1} = 194\,kg - 104.973\,kg[/tex]

[tex]m_{1} = 89.027\,kg[/tex]

And the magnitude of the force is:

[tex]F = 6.7\cdot m_{2}[/tex]

[tex]F = 596.481\,N[/tex]

The mass of Al is 89.027 kilograms.

The mass of Jo is 104.973 kilograms.

The magnitude of the force of Jo on Al is 596.481 newtons.

why meter cube is called derived unit

Answers

Answer:

Because it is the result of two more fundamental units, a derived unit is termed that. For volume, the cubic meter (m³) is the fundamental unit of area. Any number that cannot be measured directly with any equipment is referred to as a derived unit. For example, we can't quantify a substance's density using a rule, scale, or bucket.

OAmalOHopeO

The quantities that are expressed in terms of base quantities are called derived quantities
And Meter cube is derived from base quantity so it’s called a derived quantity
Hope it helps❤️⭐️

a stone is thrown vertically upwards with a velocity of 20 m per second what will be its velocity when it reaches a height of 10.2 m​

Answers

Answer:

Explanation:

Here's the info we have:

initial velocity is 20 m/s;

final velocity is our unknown;

displacement is -10.2 m; and

acceleration due to gravity is -9.8 m/s/s. Using the one-dimensional equation

v² = v₀² + 2aΔx and filling in accordingly to solve for v:

[tex]v=\sqrt{(20)^2+2(-9.8)(-10.2)}[/tex]  Rounding to the correct number of sig fig's to simplify:

[tex]v=\sqrt{400+2.0*10^2}[/tex] to get

v = [tex]\sqrt{600}=20\frac{m}{s}[/tex] If you don't round like that, the velocity could be 24, or it could also be 24.5 depending on how your class is paying attention to sig figs or if you are at all.

So either 20 m/s or 24 m/s

You are to connect resistors R1 andR2, with R1 >R2, to a battery, first individually, then inseries, and then in parallel. Rank those arrangements according tothe amount of current through the battery, greatest first. (Useonly the symbols > or =, for exampleseries>R1=R2>parallel.)

Answers

Answer:

The current is more in the parallel combination than in the series combination.

Explanation:

two resistances, R1 and R2 are connected to a battery of voltage V.

When they are in series,

R = R1 + R2

In series combination, the current is same in both the resistors, and it is given by Ohm's law.

V = I (R1 + R2)

[tex]I = \frac{V}{R_1 + R_2}[/tex]..... (1)

When they are connected in parallel.

the voltage is same in each resistor.

The effective resistance is R.

[tex]R = \frac{R_1R_2}{R_1 + R_2}[/tex]

So, the current is

[tex]I = \frac{V(R_1+R_2)}{R_1 R_2}[/tex]..... (2)

So, the current is more is the parallel combination.

A 30-year-old astronaut goes off on a long-term mission in a spacecraft that travels at speeds close to that of light. The mission lasts exactly 20 years as measured on Earth. Biologically speaking, at the end of the mission, the astronaut's age would be:_______.
a) exactly 50 years.
b) exactly 25 years.
c) exactly 30 years.
d) less than 50 years.
e) more than 50 years.

Answers

Answer:

I think D) less than 50 years

Biologically speaking, at the end of the mission, the astronaut's age would be less than 50 years. The correct option is d.

Who is an astronaut?

An astronaut observes and performs the experiments based on the universe.

A 30-year-old astronaut goes off on a long-term mission in a spacecraft that travels at speeds close to that of light. The mission lasts exactly 20 years as measured on Earth.

Due to special relativity, between space and Earth, both moving with different speeds.

The total age will be less than 30 +20 =50 years. In space, he is moving with speed of light. So, time will move slowly. As measured with respect to Earth, exact time spent in space 20 years will be less on Earth.

So, biologically speaking, at the end of the mission, the astronaut's age would be less than 50 years.

Thus, the correct option is d.

Learn more about astronaut.

https://brainly.com/question/11244838

#SPJ2

The spectral lines of two stars in a particular eclipsing binary system shift back and forth with a period of 6 months. The lines of both stars shift by equal amounts, and the amount of the Doppler shift indicates that each star has an orbital speed of 64,000 m/s. What are the masses of the two stars

Answers

Answer:

the masses of the two stars are; m₁ = m₂ = 4.92 × 10³⁰ kg

Explanation:

Given the data in the question;

Time period = 6 months = 1.577 × 10⁷ s

orbital speed v = 64000 m/s

since its a circular orbit,

v = 2πr / T

we solve for r

r = vT/ 2π

r = ( 64000 × 1.577 × 10⁷ ) / 2π

r = 1.6063 × 10¹¹ m = ( (1.6063 × 10¹¹) / (1.496 × 10¹¹) )AU = 1.0737 AU

Now, from Kepler's law

T² = r³ / ( m₁ + m₂ )

T = 6 months = 0.5 years

we substitute

(0.5)² = (1.0737)³ / ( m₁ + m₂ )

0.25 = 1.2378 / ( m₁ + m₂ )

( m₁ + m₂ ) = 1.2378 / 0.25

( m₁ + m₂ ) = 4.9512

m₁ = m₂  = 4.9512 / 2 = 2.4756 solar mass

we know that solar mass = 1.989 × 10³⁰ kg

so

m₁ = m₂ = 2.4756 × 1.989 × 10³⁰ kg

m₁ = m₂ = 4.92 × 10³⁰ kg

Therefore, the masses of the two stars are; m₁ = m₂ = 4.92 × 10³⁰ kg

A stone with a mass of 0.100kg rests on a frictionless, horizontal surface. A bullet of mass 2.50g traveling horizontally at 500m/s strikes the stone and rebounds horizontally at right angles to its original direction with a speed of 300m/s.
A) Compute the magnitude of the velocity of the stone after it is struck.
B) Compute the direction of the velocity of the stone after it is struck. (degrees from the initial direction of the bullet)

Answers

Answer:

Explanation:

Given that:

mass of stone (M) = 0.100 kg

mass of bullet (m) = 2.50 g = 2.5  ×10 ⁻³ kg

initial velocity of stone ([tex]u_{stone}[/tex]) = 0 m/s

Initial velocity of bullet ([tex]u_{bullet}[/tex]) = (500 m/s)i

Speed of the bullet after collision ([tex]v_{bullet}[/tex]) = (300 m/s) j

Suppose we represent [tex](v_{stone})[/tex] to be the velocity of the stone after the truck, then:

From linear momentum, the law of conservation can be applied which is expressed as:

[tex]m*u_{bullet} + M*{u_{stone}}= mv_{bullet}+Mv_{stone}[/tex]

[tex](2.50*10^{-3} \ kg) (500)i+0 = (2.50*10^{-3} \ kg)(300 \ m/s)j + (0.100 \ kg)v_{stone}[/tex]

[tex](2.50*10^{-3} \ kg) (500)i- (2.50*10^{-3} \ kg)(300 \ m/s)j= (0.100 \ kg)v_{stone}[/tex]

[tex]v_{stone}= (1.25\ kg.m/s)i-(0.75\ kg m/s)j[/tex]

[tex]v_{stone}= (12.5\ m/s)i-(7.5\ m/s)j[/tex]

The magnitude now is:

[tex]v_{stone}=\sqrt{ (12.5\ m/s)^2-(7.5\ m/s)^2}[/tex]

[tex]\mathbf{v_{stone}= 14.6 \ m/s}[/tex]

Using the tangent of an angle to determine the direction of the velocity after the struck;

Let θ represent the direction:

[tex]\theta = tan^{-1} (\dfrac{-7.5}{12.5})[/tex]

[tex]\mathbf{\theta = 30.96^0 \ below \ the \ horizontal\ level}[/tex]

A proton moves perpendicular to a uniform magnetic field at a speed of 1.75 107 m/s and experiences an acceleration of 2.25 1013 m/s2 in the positive x-direction when its velocity is in the positive z-direction. Determine the magnitude and direction of the field.

Answers

Answer:

B = 0.013(-j) T

Explanation:

Given that,

The speed of a proton, [tex]v=1.75\times 10^7\ m/s[/tex]

Acceleration experienced by the proton,[tex]a=2.25\times 10^3\ m/s[/tex]

We need to find the magnitude and the direction of the magnetic field. At equilibrium,

[tex]ma=qvB\\\\B=\dfrac{ma}{qv}\\\\B=\dfrac{1.67\times 10^{-27}\times 2.25\times 10^{13}}{1.6\times 10^{-19}\times 1.75\times 10^{7}}\\\\B=0.013\ T[/tex]

The velocity is in +z direction, force in +x direction, then the field must be in -y direction.

Susan is quite nearsighted; without her glasses, her far point is 34 cm and her near point is 17 cm . Her glasses allow her to view distant objects with her eye relaxed. With her glasses on, what is the closest object on which she can focus?

Answers

Answer:

[tex]u=34cm[/tex]

Explanation:

From the question we are told that:

Far point is [tex]V=34 cm[/tex]

Near point is [tex]u=17 cm[/tex]

Therefore

Focal Length

[tex]f=-34cm[/tex]

Generally the equation for the Lens is mathematically given by

[tex]\frac{1}{u}=\frac{1}{f}-\frac{1}{v}[/tex]

[tex]\frac{1}{u}=\frac{1}{-34}-\frac{1}{-17}[/tex]

[tex]u=34cm[/tex]

Choir members are traditionally grouped into four main vocal registers: bass,
tenor, alto, and soprano. Men with low-pitched voices tend to sing bass, while
those with slightly higher-pitched voices sing in the tenor range. Similarly,
women with low-pitched voices sing alto, while women with high-pitched
voices sing soprano. Which vocal register sings at the lowest frequency?
A. Bass
B. Alto
C. Soprano
D. Tenor

Answers

Answer:

The bass has the lowest frequency ,it only causes vibrations but at a lower frequency

A 3.1-mole sample of an ideal gas is gently heated at constant temperature 320 K. It expands from initial volume 23 L to final volume V2. A total of 1.7 kJ of heat is added during the expansion process. What is V2? Let the ideal-gas constant R = 8.314 J/(mol • K).

Answers

From the ideal gas law,

PV = nRT   ==>   P = nRT/V

where P is the pressure exerted by the gas on the container. The work W done by this pressure as the volume of the gas changes from V₁ to V₂ is given by the integral,

[tex]W = \displaystyle \int_{V_1}^{V_2}P\,\mathrm dV \implies W = nRT \ln\left(\dfrac{V_2}{V_1}\right)[/tex]

and solving for V₂ gives

[tex]V_2 = V_1\exp\left(\dfrac{W}{nRT}\right)[/tex]

If you add 1.7 kJ of heat to the system, which does the aforementioned work, the gas will expand to a volume of

[tex]V_2 = (23\,\mathrm L)\exp\left(\dfrac{1.7\,\mathrm{kJ}}{(3.1\,\mathrm{mol})\left(8.314\frac{\rm J}{\mathrm{mol}\cdot\mathrm K}\right)(320\,\mathrm K)}\right) \approx \boxed{28 \,\mathrm L}[/tex]

Other Questions
Help me plz help me plz In the middle colonies,many European settlers had the new opportunity to become give a coordinates of the Vertex y =(x + 2). squared - 1 Which method gives the actual age of a fossil in years? what does a historian typically do immediately after forming a historical question? MC Qu. 97 The standard materials cost to produce... The standard materials cost to produce 1 unit of Product R is 7 pounds of material at a standard price of $47 per pound. In manufacturing 6,000 units, 41,000 pounds of material were used at a cost of $48 per pound. What is the total direct materials cost variance Sayad bought a watch and sold to Dakshes at 10% profit. Sayad again sold it to Sahayata for rs 6,050 at 10% profit. i)Find the cost price of Dakshes. ii) Find the cost price of Sayad. this is another question i need hlp with I'LL GIVE BRAINLIEST !!!! FASTERRplease explain how do you get the answer ! If the length of the shorter arc AB is 22cm and C is the center of the circle then the circumference of the circleis: List any 10 kpop songs name...No jpt message!!!! Please answer correctlyUrgentwill give the brainliest! 4. Work out the area. people supporting fight against corruption change to future simple Behavior decreases because something pleasant is taken away as a consequence of the behavior: Charlie throws a fit in the toy store because his mom would not buy him the game that all his friends have. His mom got embarrassed, so she took away Charlies game from him for a week. Since this happened, Charlie has never thrown a fit in a toy store again. This is an example of: When we are considering AU and are thinking about how the utility gained by the majority could outweigh the disutility suffered by the minority, we are talking about a problem that deals with justice and human rights. A. True B. False Which of the following statements summarizes the point of disagreement between Jimmy and Susan?Jimmy said that he agrees with Susan to a point.Jimmy thinks that elected officials do not need to meet a certain educational requirement in order to hold office, and Susan believesthe officials need to have a 4-year college degree.Susan and Jimmy will never agree.Susan believes that elected official need to be able to read legal documents. what is 6 : 45 in French What is the sum of the reciprocals of all the factors of 24. Both 1 and 24 areconsidered to be factors of 24.A: 59/24B: 5/2C: 65/24D: 53/24E: 41/24 in nepal, province no.2 consists of more cultivable lands compared to other provinces. how should it be utilized to get more benefits?