am i doing this right??? if not how can i change it?!

Answer:

0.371

Explanation:

number of moles = mass / Ar

= 23.8g / 32.1 + (16.0 × 2)

= 0.37129485179 = 0.371 (3 s.f).

hope it helps :)

Answer:

B. Helium

Explanation:

Correct me if I'm wrong

The molar solubility of AuCl₃ in 0.010M MgCl₂ is 4 ×10⁻²⁰M.

The solubility product constant, Ksp, is the equilibrium constant for a solid substance dissolving in an aqueous solution. And for the AuCl₃ Ksp will be written as: Ksp = [Au³⁺][Cl⁻]³

AuCl₃(aq) ⇄ Au³⁺(aq) + 3Cl⁻(aq)

Let the solubility of the AuCl₃ in 0.013m solution of magnesium chloride is x, of Au³⁺ is x and of Cl⁻ is 3x. But we know that MgCl₂ is a strong electrolyte and it completely dissociates into its ion and will produce 2 moles of chloride ions. For this solution let we consider the volume is 1 litre then the concentration of chloride ions in MgCl₂ is 2(0.010) = 0.020M.

So, in MgCl₂ solution concentration of Cl⁻ becomes = 3x + 0.020.

Value of Ksp for AuCl₃ = 3.2 × 10⁻²⁵

On putting all values on the Ksp equation, we get

Ksp = (x)(3x + 0.020)³

Value of 3x is negligible as compared to the 0.020, so the equation becomes

3.2 × 10⁻²⁵ = (x)(0.020)³

x = 3.2×10⁻²⁵ / (0.020)³

x = 4 ×10⁻²⁰M

Hence the molar solubility of AuCl₃ in 0.010M MgCl₂ is 4 ×10⁻²⁰M.

To know more about molar solubility, visit the below link:
https://brainly.com/question/27308068

#SPJ4

Geometric progression is a sequence that can be found by multiplying the same value by the preceding number. The next term in the sequence is 8 / 81.

A geometric progression is a sequence of numbers other than 0 and can be estimated by multiplying a specific digit by the prior number. It is given as,

an = a₁rⁿ⁻¹

Where r is the common ratio or the number.

For the given sequence the common ratio (r) is 2/3.

Substituting values:

an = (1/2) ×  (2/3)ⁿ⁻¹

Applying r:

an=2ⁿ⁻¹ / 2 × 3ⁿ⁻¹

Substitute n to find the nth term as:

a₅=2⁽⁵⁾⁻²/ 3⁽⁵⁾⁻¹

a₅=8/ 3⁽⁵⁾⁻¹

a₅ = 8/ 81

Therefore, the next number on the sequence is 8/81.

Learn more about geometric progression here:

https://brainly.com/question/11266123

#SPJ1

Answer:

21.4 M

Explanation:

7.5 mole / ( 350/1000) = 21.4 M

The density in grams per milliliter  7.975.

Density is the mass of per unit volume. Density is equals to mass into volume.

D = M x V

The mass of a gem is given, M = 5.50

The volume is 10.45 - 9.00 = 1.45

Thus, the density is

D = 5.50 × 1.45 = 7.975

Thus, the density in grams per milliliter is 7.975.

Learn more about density

https://brainly.com/question/19320982

#SPJ4

Answer:

H2O

H2O

Explanation:

because the are only two hydrogen that can react to Oxygen

The amount of chalcopyrite must be mined to obtain 500g of pure Cu is 1.4 kilograms.

Relation between the mass and moles of any substance will be represented as:

n = W/M, where

Moles of Cu = 500g / 63.5g/mol = 7.87 mole

Given chemical reaction is:

CuFeS₂ → Cu²⁺ + Fe²⁺ + 2S²⁻

From the stoichiometry of the reaction, it is clear that

1 mole of Cu = produced by 1 mole of CuFeS₂

7.87 mole of Cu = produced by 7.87 mole of CuFeS₂

Mass of given moles of CuFeS₂ = (7.87mol)(183.5g/mol) = 1,444.14g = 1.4kg

Hence required mass of CuFeS₂ is 1.4 kg.

To know more about mass & moles, visit the below link:
https://brainly.com/question/20838755

#SPJ4

The following is a classification of the compounds;

The term ionic substance refers to a substance that is composed of ions. It is a substance that can dissolve in water.

The following is a classification of the compounds;

Learn more about ionic substance:https://brainly.com/question/18026223

SPJ1

Answer:

Here is the solution....hope it helps :)

The concentration of the 2.22 mL perchloric acid that was neutralized with barium hydroxide is 3.1 M.

The neutralization is given as the reaction of the acid and the base forming salt. The reaction of 1 mole of barium hydroxide requires 2 moles of perchloric acid to neutralize completely.

The volume of barium hydroxide given was 15.1 mL. The moles of barium hydroxide has been:

[tex]\rm 1000\;mL\; Ba(OH)_2 = 0.2288 \;mol Ba(OH)_2\\\\15.1\;mL\;Ba(OH)_2=0.0034\;mol[/tex]

The moles of perchloric neutralized by 0.0034 mol barium hydroxide will be:

[tex]\rm 1\;mol\;Ba(OH)_2=2\;mol\;HClO_4\\\\\rm 0.0034\;mol\;Ba(OH)_4=0.0069\;mol\;HClO_4[/tex]

The volume of perchloric has been 2.22 mL. The concentration of the acid is given as:

[tex]\rm Concentration=moles\;\times\dfrac{1000}{volume(mL)}\\\\Concentration=0.0069\;mol\;\times\dfrac{1000}{2.22}\\\\Concentration=3.1\;M[/tex]

The concentration of the perchloric acid aliquot is 3.1 M.

Learn more about neutralization, here:

https://brainly.com/question/15347368

#SPJ4

Answer:

Metals

Explanation:

When acids react with metals h2 gas is produced and a salt is formed

eg. Na + HCL ---------- NaCl + H2

Answer:

active metals

Explanation:

The Delta G for the autoionization of water can be calculated as [tex]\Delta G=-RTlnK[/tex].

The autoionization of water is given as the reaction of the two water molecules, resulting in the formation of the ions of hydronium and hydroxide ion.

It can be expressed as:

[tex]\rm 2\;H_2O\;\leftrightharpoons\;H_3O^+\;+\;OH^-[/tex]

The[tex]\Delta G[/tex] of the autoionization of water can be given as;

[tex]\Delta G=-RTlnK[/tex]

Learn more about autoionization, here:

https://brainly.com/question/7251420

#SPJ4

The nitrate reduction test with the uninoculated tube considers it a positive control.

The nitrate reduction assay is given as the assay with the ability of the bacteria or enzyme to reduce nitrate to nitrite.

The test is performed by considering the difference in the inoculated and the uninoculated tubes with bacteria. The tube with the bacteria and the nitrate is termed a test tube.

The tube with nitrate only without bacteria is termed as a negative control, as it will not have the results for the reduction and can be used to assess the test.

Learn more about nitrate reduction test, here:

https://brainly.com/question/20308712

#SPJ4

The mass of the formed precipitate of AgCl in the reaction is 1.29 grams.

Moles (n) of any substance from molarity (M) will be calculated by using the below equation:
M = n/V, where

V = volume in L

Given chemical reaction is:
2AgNO₃(aq) + CaCl₂(aq) → 2AgCl(s) + Ca(NO₃)₂(aq)

From the stoichiometry of the reaction, mole ratio of AgNO₃ to CaCl₂ is 2:1.

0.0015 moles of AgNO₃ = reacts with 1/2×0.0045 = 0.00075 moles of CaCl₂

Here CaCl₂ is the limiting reagent, and formation of precipitate depends on this only.

Again from the stoichiometry of the reaction:

0.0045 moles of CaCl₂ = produces 2(0.0045) = 0.009 moles of AgCl

Mass of 0.009 moles AgCl will be calculated as:

n = W/M, where

W = (0.009)(143.45) = 1.29g

Hence required mass of precipitate is 1.29 grams.

To know more about moles & molarity, visit the below link:
https://brainly.com/question/24322641

#SPJ4

The pressure exerted when both gases are put together in a single 1 liter container is 5 atm.

Pressure is the force exerted by any object on another object.

Given that, a and b separate 1 liter containers and exert pressure of 2 atm and 3 atm respectively.

When both gases a and b exert together, the pressure then

2 atm + 3 atm = 5 atm.

Thus, the pressure exerted when both gases are put together in a single 1 liter container is 5 atm.

Learn more about pressure

https://brainly.com/question/12977546

#SPJ4

The concentration required to begin to precipitate PbCl2 for PbCl2 is 0.0216 M.

Molarity is the measure of the concentration of any solute in per unit volume of the solution.

The reaction is [tex]\rm Pb^2^+(aq) + 2Cl^-(aq) \rightarrow PbCl_2(s).[/tex]

The molarity of lead is 0.025 M

The ksp is given 17×10⁻⁵

Now, calculating the concentration

[tex][Pb^2^+] = 0.025 M.\\Ksp = 1.17 \times 10^-^5\\Ksp = [Pb^2^+] \times [Cl^-]^2\\[Cl^-] = \dfrac{\sqrt{ Ksp}}{[Pb^2^+]} \\\\[Cl^-] = \dfrac{\sqrt{ 0.0000117}}{0.025} \\[Cl^-] = 2.16 \times 10^-^2M.[/tex]

Thus, the concentration required to begin to precipitate PbCl2 for PbCl2 is 0.0216 M.

Learn more about molarity

https://brainly.com/question/10725862

#SPJ4

Between A and B

The highest probability is that A and B are solids and they are forming liquid or gases.

Between A and C

Highest probability is that A and C are gases and they are turning into liquid or solid

Answer:

option c is the correct answer of given statement in chemistry

Answer: The answer is D. (The other answer is incorrect)

Explanation: AH is just known as enthalpy. Search it up!

Answer: When this atom loses an electron, the result is a positive ion.

Explanation:

According to the research, scientific observations are important because every experiment begins with observations.

It consists of receiving knowledge of the outside world through our senses, it means that we naturally make observations about the world around us and the first step proposed by the scientific method.

Scientific observation, on the other hand, refers to the process of detailing any phenomenon of nature with analytical intent, usually later replicated in a laboratory (experimentation) or controlled environment.

Similarly, there are qualitative observations that are based on the senses, which are generally more subjective, while quantitative observations are more objective, focusing mainly on numbers, for example "the flower has five petals" is a quantitative observation.

Therefore, we can conclude that according to the context, scientific observations are important because every experiment begins with observations.

Learn more about scientific observations here: https://brainly.com/question/24071808

#SPJ1

Answer:

1. Every experiment begins with observations

2.In field investigations, it is much more difficult to separate your control and experimental groups.

3.based on your senses

4.The flower has five petals.

5.We naturally make observations about the world around us.

They are statements made based on something seen, noticed, or measured. (I think 5 is wrong, if it is then sorry guys dont report me, i tried my best.)

Explanation:

Answer:

0.53 (sig figs) or 0.525 original answer

Explanation:

If you use the formula (M1)(V2)=(M2)(V2) and plug in the values, you are solving for the missing X, which is the concentration.

Answer:

T = (Z x 10) + 50

Explanation:

We can tell which acid which have the highest percent ionization on the basis of pH value.

The % ionized indicates how much of the original chemical has ionized. As a result, we compare the ion concentration in solution to the neutral species' original concentration.

If any acid have a high pH value then they must show high percent ionization because they are strong in nature and show full dissociation.

Hence acids with high pH value will show highest percent ionization.

To know more about percent ionization, visit the below link:

https://brainly.com/question/3229194

#SPJ4

Answer:

(c) Fe2O3 + 3CO → 2Fe + 3CO2

Explanation:(c) Fe2O3 + 3CO → 2Fe + 3CO2

Carbon monoxide (CO) is the reducing agent, it has reduced ferric oxide (Fe2O3) which acts as an oxidising agent.

hope its help