A solid sphere made of copper is initially at a temperature of 25∘C and has an initial radius of 2.0 cm. The sphere is heated to a temperature of 150∘C. What is the new radius of the sphere at the new temperature? (for copper α=17×10−61/K and β=51×10−61/K )

As per the Doppler effect, the frequency of a wave appears to change when there is relative motion between the source of the wave and the observer.

When there is motion, the waves in front of the source get compressed and the waves behind the source get elongated. As a result, the frequency of the wave changes.

It is different when the observer is stationary and the source is moving and different when the observer is moving and the source is stationary.In the problem, the ambulance is moving away from the observer.

Therefore, the frequency heard by the observer will be less than the actual frequency produced by the siren. The formula for the apparent frequency heard by the observer is:f′=f(v+v0v−vs)where, f' is the apparent frequency, f is the actual frequency of the source, v is the velocity of sound, v0 is the velocity of the observer, and vs is the velocity of the source.

Substituting the given values,f'=1500(343+0/(343+50))=1414.85 HzTherefore, the frequency observed by the observer is 1414.85 Hz.Speed of wave: The speed of the wave is given by the formula:v=fλwhere, v is the velocity of the wave, f is the frequency of the wave, and λ is the wavelength of the wave.Substituting the given values,v=1414.85(343)=484,919.55 m/hThe speed of the wave is 484,919.55 m/h.Approximating to 1 decimal place, the speed of the wave is 135 m/s.

To know more about appears visit:

https://brainly.com/question/22052312

#SPJ11

The potential difference between point a and b in the given scenario is -0.28 kV, and the change in potential energy for a +2.00 nC test charge moving from point a to b is -0.56 µJ. The negative sign indicates a decrease in potential energy during the movement.

Electric field of 3.50 kN/C points in the +x direction. Charge q = +2.00 nC.

The change in potential energy of a test charge as it is moved from point a to b can be calculated using the formula: ΔU = qΔV, where q is the charge of the test charge and ΔV is the change in voltage between the two points. The voltage difference is the work done to move a unit charge from one point to another.

ΔV = -E Δx, where Δx is the distance between the two points.

a) The potential difference between point a and b:

ΔV = -E Δx = (-3.5 kN/C) (80 cm) = -0.28 kV.

Thus, the change in potential energy of a test charge as it is moved from point a to b can be calculated as follows:

ΔU = qΔV = (2.00 nC)(-280 V) = -5.6×10⁻⁴ J = -0.56 µJ.

The change in potential energy of a +2.00nC test charge, ΔUelectric, between points a and b is -0.56 µJ (negative sign indicates a decrease in potential energy).

Learn more about potential energy: https://brainly.com/question/24933254

#SPJ11

The magnitude of the force exerted on the charge by the electric field is 0.00098 N (rounded to three significant figures).

The electric field equation is given by:

E = F/q

where E is the electric field, F is the electric force acting on a charged particle, and q is the electric charge.

In this problem, we are given that the electric field strength is 265 N/C and the charge is 3.7μC.

Thus the electric force can be calculated as:

F = Eq

Substituting the given values:

E = 265 N/Cq = 3.7μ

C= 3.7 x 10^-6

CF = Eq= 265 N/C x 3.7 x 10^-6 C= 0.00098 N (rounded to three significant figures).

Therefore, the magnitude of the force exerted on the charge by the electric field is 0.00098 N (rounded to three significant figures).

To know more about force refer here: https://brainly.com/question/30507236#

#SPJ11

The magnitude of the force exerted on the charge by the electric field is 0.98155 N.

Charge = 3.7 μC

Electric field = 265 N/C

The formula for the electric force acting on a charge due to the electric field is:

F = q * E

Where,

F = Force

q = Charge

E = Electric field

Substituting the given values, we get:

F = 3.7 μC * 265 N/C

F = 981.55 * 10^-6 N

F = 0.98155 N

Therefore, the magnitude of the force exerted on the charge by the electric field is 0.98155 N.

To learn more about magnitude, refer below:

https://brainly.com/question/28714281

#SPJ11

Speed at which the ball was launched = 15.696 m/s (approx).

Given data: Let the initial velocity be u, the final velocity be v, the time taken be t, and the acceleration be a.

Initial velocity (u) = 0 (As the ball is thrown upwards)

Final velocity (v) = ?

Acceleration (a) = g = 9.81 m/s²

Time taken (t) = 1.6 s

Now, the formula for displacement is:v = u + at

Here, u = 0So, v = at

Now, the formula for height or distance traveled by an object is:

s = ut + 1/2 at²

Here, u = 0, so: s = 1/2 at²

This is the formula for height or distance travelled by an object. In our case, the maximum height is reached when the ball is at its highest point and velocity is zero.

Therefore, we can say that: v = 0 (At the highest point)

Now, putting the values of t and g in s = 1/2 at², we get:

s = 1/2 x 9.81 x 1.6²s = 12.55 m

Therefore, the speed at which the ball was launched is: v = at = 9.81 x 1.6

= 15.696 m/s (approx)

Answer: Speed at which the ball was launched = 15.696 m/s (approx).

To know more about Speed visit-

https://brainly.com/question/17661499

#SPJ11

The separation between the point charge and the center of the sphere due to attractive force is 3.16 cm.

Charge 1, q1 = 366 × 10^(-6) C, Charge 2, q2 = Q, Separation between charges, r = 2.03 m, Force, F = 0.930 N, Charge density, σ = +13.0 μC/m², Radius of the sphere, R = 4.04 cm = 0.0404 m, Force on point charge, F = 4.24 × 10^(-2) N.

Coulomb's law gives the magnitude of the force, F as:

F = k (q1q2/r²)

where k = 1/4πε₀ = 9 × 10^9 Nm²/C²

0.930 = 9 × 10^9 × (366 × 10^(-6) Q)/(2.03)²0.930 × 2.03²/9 × 10^9

= 366 × 10^(-6) Q

Q = 1.13 × 10^(-6) C.

Charge density is defined as the amount of charge per unit area. For a sphere, it is given as:σ = q/4πR²where q is the charge on the sphere.13.0 × 10^(-6) C/m² = q/4π(0.0404)²q = 6.05 × 10^(-8) C. The force between a point charge and a charged sphere is given by: Coulomb's law: F = k (q1q2/r²)

As the force on the point charge is attractive, the charge on the sphere must be opposite in sign to that of the point charge. Therefore, we take q2 = -6.05 × 10^(-8) C.

4.24 × 10^(-2) = 9 × 10^9 × (1.05 × 10^(-6))(-6.05 × 10^(-8))/r²

r² = (9 × 10^9 × 1.05 × 10^(-6) × 6.05 × 10^(-8))/4.24 × 10^(-2)

r = 0.0316 m = 3.16 cm.

Therefore, the separation between the point charge and the center of the sphere due to attractive force is 3.16 cm.

Learn more about force : https://brainly.com/question/12785175

#SPJ11

The magnitude of the body's acceleration is 0.522 m/s².

The horizontal component of the 7.3 N force is:

7.3 cos 57° = 3.55 N in the western direction

The net horizontal force acting on the body is:

7.1 N - 3.55 N = 3.55 N to the east

The body's mass is 6.8 kg, and the magnitude of the net horizontal force acting on it is 3.55 N to the east.

Thus, the body's acceleration is given by:

a = F/m

  = 3.55 N / 6.8 kg

  = 0.522 m/s² (2 significant figures)

Therefore, the magnitude of the body's acceleration is 0.522 m/s².

Learn more about Magnitude from the given link;

https://brainly.com/question/350008

#SPJ11

The density of the moon rock is 1000 kg/m³.

Mass of the moon rock = 9.40 kg,

Apparent mass of moon rock in water = 6.40 kg

We can use the Archimedes principle to find the density of the rock.

Archimedes principle states that "Any object, wholly or partially immersed in a fluid, is buoyed up by a force equal to the weight of the fluid displaced by the object."

This means that when an object is submerged in a fluid, there is an upward force acting on the object which is equal to the weight of the fluid displaced by the object.

So, we can find the volume of the rock by using the formula:

Volume of the rock = Volume of water displaced by the rock

Using the apparent mass of the rock, we can find the volume of the rock in water as follows:

Mass of water displaced by the rock = Mass of rock = 9.40 kg

Volume of water displaced by the rock = Mass of water displaced / Density of water

= 9.40 kg / 1000 kg/m³

= 0.0094 m³

Volume of the rock = Volume of water displaced = 0.0094 m³

Now, we can find the density of the rock using the formula:

Density = Mass / Volume

Density of the rock = 9.40 kg / 0.0094 m³

= 1000 kg/m³

So, the density of the moon rock is 1000 kg/m³.

Learn more about the Archimedes principle:

brainly.com/question/1155674

#SPJ11

The answers to the given questions are as follows:

(a) The average acceleration required for the cheetah to accelerate from rest to 70.0 km/h in 2.50 s is approximately 7.76 m/s².

(b) The statement that the cheetah covered 60.0 m during the 2.50 s interval implies a constant acceleration of approximately 19.2 m/s².

(c) Considering the constraints of slipping on rough ground, the mentioned accelerations in the article (7.76 m/s² and 19.2 m/s²) are reasonable and unlikely to be wrong.

(a) To find the average acceleration in m/s², we need to convert the speed from km/h to m/s and then use the formula for average acceleration:

Average acceleration = (final velocity - initial velocity) / time

Given:

Initial velocity (u) = 0 m/s (starting from rest)

Final velocity (v) = 70.0 km/h

                           = (70.0 × 1000) / 3600 m/s

                           ≈ 19.4 m/s

Time (t) = 2.50 s

Average acceleration = (19.4 m/s - 0 m/s) / 2.50 s

Average acceleration ≈ 7.76 m/s²

Therefore, the average acceleration required for the cheetah to accelerate from rest to 70.0 km/h in 2.50 s is approximately 7.76 m/s².

(b) To determine the constant acceleration implied by the statement that the cheetah covered 60.0 m during the 2.50 s interval, we can use the following kinematic equation:

s = ut + (1/2)at²

where:

s is the distance covered (60.0 m),

u is the initial velocity (0 m/s),

t is the time (2.50 s),

a is the constant acceleration (to be determined).

Plugging in the values, we have:

60.0 = 0 + (1/2)a(2.50)²

60.0 = (1/2)(6.25)a

a = (2 × 60.0) / 6.25

a ≈ 19.2 m/s²

Therefore, the implied constant acceleration based on the statement that the cheetah covered 60.0 m in 2.50 s is approximately 19.2 m/s².

(c) Given the information that accelerations substantially greater than g (acceleration due to gravity) are difficult for an animal or automobile to attain due to slipping, it is likely that the acceleration values mentioned in the article are reasonable. The average acceleration of 7.76 m/s² falls within a realistic range for the cheetah's acceleration capability, as does the implied constant acceleration of 19.2 m/s².

Therefore, it is unlikely that the accelerations mentioned in the article are wrong, considering the constraints mentioned regarding slipping on rough ground.

Learn more about Acceleration from the given link:

https://brainly.com/question/30660316

#SPJ11

The plane will travel approximately 3.78 kilometers (km) in the next 42.0 seconds, assuming the forces remain constant.

To calculate the distance traveled by the plane, we need to determine the net force acting on the plane and then use kinematic equations to find the distance traveled.

The net force acting on the plane is the vector sum of thrust and drag forces: net force = thrust - drag. Substituting the given values, we have net force = 1.800 kN - 1.400 kN = 0.400 kN eastward.

Using Newton's second law (F = ma), we can find the acceleration of the plane. The net force acting on the plane is equal to the mass of the plane multiplied by its acceleration: 0.400 kN = 1160 kg * a. Solving for a, we find the acceleration to be approximately 0.00034 m/s².

Next, we can use the kinematic equation s = ut + (1/2)at² to calculate the distance traveled by the plane. Since the initial velocity (u) is given as 90.0 m/s and the time (t) is 42.0 seconds, we substitute these values along with the acceleration into the equation. Plugging in the values, we get s = (90.0 m/s) * (42.0 s) + (1/2) * (0.00034 m/s²) * (42.0 s)².

Calculating the expression, we find that the plane will travel approximately 3.78 km in the next 42.0 seconds, assuming the forces remain constant.

Learn more about acceleration here:

https://brainly.com/question/2303856

#SPJ11

(a). It takes approximately 4.7 seconds for the bike to come to rest.

(b). The approximate angular acceleration of each wheel is -4.1 rad/s². The negative sign indicates that the wheels are decelerating.

(a) To find the time it takes for the bike to come to rest, we can use the formula:

angular displacement = angular velocity * time

We are given that the angular displacement of each wheel is 14.6 revolutions, which we can convert to radians:

1 revolution = 2π radians So,

14.6 revolutions = 14.6 * 2π radians.

Next, we can rearrange the formula to solve for time:

time = angular displacement / angular velocity

Substituting the given values, we have:

time = (14.6 * 2π radians) / 19.4 rad/s

Simplifying the expression, we get:

time = (29.2π radians) / 19.4 rad/s

The units of radians cancel out, leaving us with:

time = 29.2π / 19.4 s

Now, we can calculate the approximate value of time:

time ≈ 4.7 s

Therefore, the bicycle comes to a stop after 4.7 seconds or thereabouts.

(b) To find the angular acceleration of each wheel, we can use the formula:

angular acceleration = change in angular velocity / time

Since the bike comes to a uniform stop, the final angular velocity is 0 rad/s. The initial angular velocity is given as 19.4 rad/s.

The change in angular velocity is:

change in angular velocity = final angular velocity - initial angular velocity

Substituting the given values, we have:

change in angular velocity = 0 rad/s - 19.4 rad/s

Simplifying the expression, we get:

change in angular velocity = -19.4 rad/s

Now, we can substitute the values into the formula for angular acceleration:

angular acceleration = (-19.4 rad/s) / 4.7 s

Simplifying the expression, we get:

angular acceleration ≈ -4.1 rad/s²

Therefore, each wheel's approximate angular acceleration is -4.1 rad/s². The wheels are slowing down, as shown by the negative sign.

To learn more about angular displacement from the given link.

https://brainly.com/question/31150979

#SPJ11

Complete question is,

A person is riding a bicycle, and its wheels have an angular velocity of 19.4 rad/s. Then, the brakes are applied and the bike is brought to a uniform stop. During braking, the angular displacement of each wheel is 14.6 revolutions. (a) How much time does it take for the bike to come to rest? (b) What is the anguar acceleration (in rad/s2) of each wheel?

a) The capacitance of the circuit is approximately 22.9 μF. b) The resistance of the circuit is approximately 35.4 kΩ.

a) To find the capacitance of the circuit, use the formula for the time constant of an RC circuit:

τ = RC

Given that the time constant (τ) is 5.26 s and the resistance (R) is 229.9 kΩ, rearrange the formula to solve for capacitance (C):

C = τ / R

Substituting the given values:

C = 5.26 s / 229.9 kΩ

Converting kiloohms to ohms:

C = 5.26 s / (229.9 × 10³ Ω)

Converting the result to microfarads:

C ≈ 22.9 μF

Therefore, the capacitance of the circuit is approximately 22.9 μF.

b) To find the resistance of the circuit, use the same formula for the time constant:

τ = RC

Given that the time constant (τ) is 1.97 s and the capacitance (C) is 55.7 μF, rearrange the formula to solve for resistance (R):

R = τ / C

Substituting the given values:

R = 1.97 s / 55.7 μF

Converting microfarads to farads:

R = 1.97 s / (55.7 × 10⁻⁶ F)

Converting the result to kiloohms:

R ≈ 35.4 kΩ

Therefore, the resistance of the circuit is approximately 35.4 kΩ.

Find out more on resistance and capacitance here: https://brainly.com/question/10725724

#SPJ1

Laminating the iron core of a transformer reduces eddy current losses. The proportional relationship between magnetic field strength and flux density in the iron core breaks down as current increases.

a) Laminating the iron core of a transformer reduces a type of loss known as eddy current losses. When an alternating current passes through the windings of a transformer, it induces circulating currents within the iron core. These eddy currents generate heat and consume energy, leading to power losses. By laminating the iron core, which involves dividing it into thin layers insulated from each other, the flow of eddy currents is minimized. This reduces the eddy current losses, making the transformer more efficient.

b) The proportional relationship between magnetic field strength and flux density in the iron core of an electromagnet eventually breaks down as the current continues to increase. Initially, as the current increases, the magnetic field strength and flux density inside the iron core increase in a linear manner.

However, at higher currents, the core starts to approach its magnetic saturation point. At this point, the increase in current does not result in a proportional increase in magnetic field strength. The core becomes saturated, and further increases in current lead to diminishing returns in terms of increased magnetic field strength. This breakdown in the proportional relationship is due to the limitations of the magnetic properties of the core material.

In conclusion, laminating the iron core of a transformer reduces eddy current losses, increasing its efficiency. Additionally, the proportional relationship between magnetic field strength and flux density in an electromagnet's iron core eventually breaks down as current increases due to magnetic saturation.

Learn more about flux density here:

brainly.com/question/28499883

#SPJ11

(a) The magnitude of r is approximately 4.96 meters.

(b) The direction of r when a is directed due east is west.

(c) The direction of r when a is directed due south is north.

To solve this problem, we'll use the centripetal acceleration formula and the relationship between centripetal acceleration and centripetal force.

Given:

Speed of the man (v) = 3.28 m/s

Centripetal acceleration (a) = 2.17 m/s^2

The centripetal acceleration is related to the speed and the radius of the circular motion by the formula:

[tex]a = \frac{v^2}{r}[/tex]

Rearranging the formula, we can solve for the radius (r):

[tex]r = \frac{v^2}{a}[/tex]

Substituting the given values:

[tex]r = \frac {(3.28)^2}{2.17}[/tex]

Calculating the magnitude of r:

r ≈ 4.96 m

Therefore, the magnitude of r is approximately 4.96 meters.

Since the acceleration (a) is directed due east, the position vector (r) will be directed towards the center of the merry-go-round, which is in the opposite direction (west).

If the acceleration (a) is directed due south, the position vector (r) will be directed towards the center of the merry-go-round, which is in the opposite direction (north).

To know more about centripetal force

brainly.com/question/14021112

#SPJ11

The actual question is:

A carnival merry-go-round rotates about a vertical axis at a constant rate. A man standing on the edge has a constant speed of 3.28 m/s and a centripetal acceleration of magnitude 2.17 m/s². Position vector locates him relative to the rotation axis.

(a) What is the magnitude of r?

(b) What is the direction of r when a is directed due east?

(c) What is the direction of r when a is directed due south?

The gravitational potential energy of the 777 jet airliner cruising at 10,000 m above the surface of the Earth is 24,500,000,000 joules.

The sign of gravitational potential energy depends on the reference point chosen for the zero potential energy. In the case of the airliner cruising at 10,000 m above the surface of the Earth, we need to consider the conventional choice of the surface of the Earth as the reference point. Gravitational potential energy is defined as the energy possessed by an object due to its position in a gravitational field. It is given by the equation:

PE = mgh,

where PE represents gravitational potential energy, m represents the mass of the object, g represents the acceleration due to gravity, and h represents the height or distance above the reference point.

In this scenario, the airliner is cruising at an altitude of 10,000 m above the surface of the Earth. Since the surface of the Earth is taken as the reference point, the height (h) in the equation will be positive.

m = 250,000 kg (mass of the airliner),

g = 9.8 m/s^2 (acceleration due to gravity),

h = 10,000 m (height above the surface),

PE = 250,000 kg × 9.8 m/s^2 × 10,000 m.

Calculating the value:

PE = 24,500,000,000 J (joules).

Since the height (h) is positive in this case, the gravitational potential energy is also positive. This indicates that the airliner has potential energy relative to the chosen reference point, which in this case is the surface of the Earth.

Therefore, the gravitational potential energy of the 777 jet airliner cruising at 10,000 m above the surface of the Earth is 24,500,000,000 joules.

Learn more about potential energy here: brainly.com/question/13003047

#SPJ11

Therefore, the answer is consistent with the acceleration that was calculated in Part 1b.

Part 1a) Since the track is inclined by an angle of θ and the height of the track is raised by H, so the angle is given as:

tan(θ) = H/d = 0.09/1 = 0.09

θ = tan⁻¹0.09

θ = 5.14°

Therefore, the angle of inclination of the track is 5.14°.

b) Now, we need to calculate the acceleration of the cart along the direction of the ramp. Here, we need to find the component of the gravitational acceleration g along the incline. This component is given by:

gsin(θ) = (9.8 m/s²) sin(5.14°) = 0.849 m/s²

Hence, the acceleration of the cart along the direction of the ramp is 0.849 m/s².

Relevant diagram:

Part 2a) The average speed of the cart can be calculated using the formula:

average speed = total distance / total time

Here, the cart moves a distance of 1.00 m. Therefore, the average speed is given by:

average speed = 1.00 m / 1.50 s = 0.67 m/s

b) The acceleration of the cart along the direction of the ramp can be calculated using the formula:

s = ut + 1/2 at²

Here, s = 1.00 m, u = 0 m/s (as the cart starts from rest), t = 1.50 s. Therefore, the acceleration of the cart is given by:

a = 2s / t²

= 2 × 1.00 m / (1.50 s)²

= 0.89 m/s²

The acceleration calculated in Part 1b is 0.849 m/s², whereas the acceleration calculated in Part 2b is 0.89 m/s². Both the values are close, but not exactly the same. The difference can be attributed to experimental errors, such as measurement errors in the stopwatch and the ruler used to measure the length of the track.

Therefore, the answer is consistent with the acceleration that was calculated in Part 1b.

To know more about gravitational visit:

https://brainly.com/question/3009841

#SPJ11

(a) The electric potential due to a 5e charge at a distance of 0.230 cm is 1.44 × 10^6 V.

(b) The electric potential difference between a point that is 5r away and this point is 3.59 × 10^5 V.

(c) The electric potential difference between a point that is 5r away and this point is -3.59 × 10^5 V.

(d) The sign of all answers would change if the electrons are replaced by protons.

(a) The electric potential due to the charge at a distance r=0.230 cm from the charge is:

V = kq / r

where:

k is the Coulomb constant (8.9875 × 10^9 N⋅m^2/C^2)

q is the charge of the object (5e)

r is the distance from the charge (0.230 cm)

V = 8.9875 × 10^9 N⋅m^2/C^2 * 5e / 0.230 cm = 1.44 × 10^6 V

(b) The electric potential difference between a point that is 5r away and this point is:

V(5r) - V(r) = kq / (5r) - kq / r = 4kq / 5r

V(5r) - V(r) = 4 * 8.9875 × 10^9 N⋅m^2/C^2 * e / (5 * 0.230 cm) = 3.59 × 10^5 V

(c) The electric potential difference between a point that is 5r away and this point is:

V(5r) - V(r) = kq / (5r) - kq / r = -4kq / 5r

Substituting the given values, we get:

V(5r) - V(r) = -4 * 8.9875 × 10^9 N⋅m^2/C^2 * e / (5 * 0.230 cm) = -3.59 × 10^5 V

(d) If the electrons are replaced by protons, the sign of all answers would change.

Therefore, the answers that would change are:

The sign of answer (a) would change.

The sign of answer (b) would change.

The sign of answer (c) would change.

Answer: The answer is (d).

To learn more about electric potential: https://brainly.com/question/28444459

#SPJ11

The magnitude of the vector is 38.06 units and the direction of the vector is -46.22°

Vectors are used to represent quantities that have both magnitude and direction, such as velocity, force, or displacement. Vectors are essential in describing physical phenomena, and they are typically represented using arrows or boldface letters.

X-component of vector = -27.0 units

Y-component of vector = 28.0 units

To find: The magnitude and direction of the vector

Formula:The magnitude of vector = √(x² + y²) = √((-27)² + 28²) = 38.06 units

The direction of the vector = tan⁻¹(y/x) = tan⁻¹(28/-27) = -46.22° (counterclockwise from the +x-axis)

Therefore, the magnitude of the vector is 38.06 units and the direction of the vector is -46.22° (counterclockwise from the +x-axis).

learn more about vectors

https://brainly.com/question/25705666

#SPJ11

A person will hear a sound at a lower pitch if the source is moving away from them. The pitch of a sound is determined by its frequency, which is the number of oscillations per unit of time.

The pitch of a sound is determined by its frequency, which is the number of oscillations per unit of time. When a sound source is moving away from an observer, the wavelength of the sound waves appears to increase, resulting in a decrease in frequency. This decrease in frequency leads to a lower perceived pitch of the sound. This phenomenon is known as the Doppler effect. Conversely, if the source is moving towards the observer, the wavelength appears to decrease, resulting in an increase in frequency and a higher perceived pitch. Changes in amplitude or the sound source remaining stationary do not directly affect the pitch of the sound.

To learn more about frequency click here

https://brainly.com/question/29739263

#SPJ11

Relative to city A, city C is in the direction of 58.13° north of west.

(a) In straight-line distance, the distance from city A to city C can be determined by using the Pythagorean theorem. This theorem states that in a right-angled triangle, the sum of the squares of the two shorter sides is equal to the square of the longest side, i.e., the hypotenuse. Here, the hypotenuse will be the distance between city A and C.

If AB = 200 km and BC = 345 km, then:

AC = √[(AB)² + (BC)²]

AC = √[(200 km)² + (345 km)²]

AC = √(40,000 km² + 119,025 km²)

AC = √159,025 km²

AC = 398.78 km

So, city C is approximately 398.78 km away from city A.

(b) We can use trigonometry to determine the direction of city C from city A. Let θ be the angle between AC and the westward direction. Then:

tan θ = opposite/adjacent = BC/AB = 345/200

θ = tan⁻¹(345/200)

θ = 58.13° north of west

Learn more about trigonometry:

https://brainly.com/question/11016599

#SPJ11

A charge undergoes acceleration through a potential difference of 500 V, resulting in an increase in its kinetic energy from 2.010^(-5) J to 6.010^(-5) J. The question asks for the magnitude of the accelerated charge.

The change in kinetic energy of a charged particle accelerated through a potential difference can be calculated using the formula ΔK = qΔV, where ΔK is the change in kinetic energy, q is the magnitude of the charge, and ΔV is the potential difference.

Given that the initial kinetic energy (K1) is 2.010^(-5) J and the final kinetic energy (K2) is 6.010^(-5) J, the change in kinetic energy (ΔK) is (6.010^(-5) J) - (2.010^(-5) J) = 4.010^(-5) J.

We also know that the potential difference (ΔV) is 500 V.

Using the formula ΔK = qΔV, we can rearrange the equation to solve for q:

q = ΔK / ΔV = (4.010^(-5) J) / (500 V) = 8.010^(-8) C.

Therefore, the magnitude of the accelerated charge is 8.010^(-8) C.

To know more about kinetic energy click here:

https://brainly.com/question/999862

#SPJ11

a) The magnitude of C⃗ is approximately 9.05. b) The direction of C⃗ is approximately 121.36° above the negative x-axis. c) The magnitude of D⃗ is approximately 3.95. d) The direction of D⃗ is approximately 71.04° below the negative x-axis.

(a) To find the magnitude of C⃗ = A⃗ + B⃗, we can use the formula:

|C⃗| = √(Cₓ² + Cᵧ²)

where Cₓ and Cᵧ are the x and y components of C⃗, respectively.

Given A⃗ = -3.14i - 1.93j and B⃗ = -1.85i - 5.64j, we can add their corresponding components:

Cₓ = Aₓ + Bₓ = -3.14 - 1.85 = -4.99

Cᵧ = Aᵧ + Bᵧ = -1.93 - 5.64 = -7.57

Substituting these values into the magnitude formula:

|C⃗| = √((-4.99)² + (-7.57)²) ≈ 9.05

Therefore, the magnitude of C⃗ is approximately 9.05.

(b) To find the direction of C⃗ expressed in degrees above the negative x-axis, we can use the arctan function:

θ = tan⁻¹(Cᵧ / Cₓ)

Substituting the values from part (a):

θ = tan⁻¹((-7.57) / (-4.99)) ≈ 58.64°

Since we want the answer in degrees above the negative x-axis, we subtract the calculated angle from 180°:

θ = 180° - 58.64° ≈ 121.36°

Therefore, the direction of C⃗ is approximately 121.36° above the negative x-axis.

(c) To find the magnitude of D⃗ = A⃗ - B⃗, we can use the same magnitude formula:

|D⃗| = √(Dₓ² + Dᵧ²)

Given A⃗ = -3.14i - 1.93j and B⃗ = -1.85i - 5.64j, we subtract their corresponding components:

Dₓ = Aₓ - Bₓ = -3.14 - (-1.85) = -1.29

Dᵧ = Aᵧ - Bᵧ = -1.93 - (-5.64) = 3.71

Substituting these values into the magnitude formula:

|D⃗| = √((-1.29)² + (3.71)²) ≈ 3.95

Therefore, the magnitude of D⃗ is approximately 3.95.

(d) To find the direction of D⃗ expressed in degrees below the negative x-axis, we can again use the arctan function:

θ = tan⁻¹(Dᵧ / Dₓ)

Substituting the values from part (c):

θ = tan⁻¹((3.71) / (-1.29)) ≈ -71.04°

Since we want the answer in degrees below the negative x-axis, we negate the calculated angle:

θ = -(-71.04°) ≈ 71.04°

Therefore, the direction of D⃗ is approximately 71.04° below the negative x-axis.

Learn more about magnitude  from below link

https://brainly.com/question/30337362

#SPJ11

The distance from the Sun to Neptune is 4.5×10 ^{12} m. How long does it take sunlight to reach Neptune? Put your answer in scientific notation.

Sunlight reaches Neptune in approximately 4.5 hours. To convert this to scientific notation, we can write it as

4.5 × 10^0 × 10^12 meters (since 4.5 × 10^12

meters is equal to 4.5 × 10^0 × 10^12 meters).

Then we can divide the time in seconds

(4.5 hours × 3600 seconds/hour = 16,200 seconds)

by this distance: time = distance ÷ speed of light time

= (4.5 × 10^0 × 10^12 m) ÷ (3.00 × 10^8 m/s)

time = 1.50 × 10^4 s Finally, we can convert this to scientific notation

time = 1.50 × 10^4 s = 1.50 × 10^1 × 10^3 s = 1.50 × 10^1 × 10^3 × 10^(-3)

What is the wavelength of a wave that has a speed of 710 m/s and a frequency of 1100 Hz?We know that the velocity of a wave is given by: v = λfwhere v is the velocity, λ is the wavelength and f is the frequency.

Rearranging this equation to solve for wavelengt:

λ = v/f Substituting the given values: v = 710 m/sf = 1100 Hzλ = 710/1100 = 0.646 m

The wavelength of the wave is 0.646 meters.

To know more about Neptune visit:

https://brainly.com/question/811328

#SPJ11

The golfer does not need to walk for any particular time to maintain an average speed of 1.72 m/s for the entire trip.

To solve this problem, we can use the concept of average speed, which is calculated by dividing the total distance traveled by the total time taken.

Let's start by finding the total distance traveled while riding in the golf cart. We can use the formula:

Distance = Speed × Time

Distance = 3.59 m/s × 39.3 s

Distance = 141.387 m (rounded to three decimal places)

Now, let's assume the golfer walks for time t (in seconds). We can calculate the total distance covered while walking:

Distance = Speed × Time

Distance = 1.46 m/s × t

To maintain an average speed of 1.72 m/s for the entire trip, the total distance traveled while walking and riding should be equal to the distance covered while riding the cart:

141.387 m + 1.46 m/s × t = 141.387 m

Let's solve for t:

1.46 m/s × t = 0

Since the left side of the equation is zero, it means t can be any value. The golfer does not need to walk to maintain the average speed of 1.72 m/s. Therefore, she does not need to walk for any specific duration.

Therefore, the golfer must walk for 1.72 m/s

To learn more about speed click here; brainly.com/question/31035613

#SPJ11

We need to use the equations of motion for projectile motion. The vertical component of the initial velocity required to barely clear the 1.00 m high net is approximately 1.41 m/s. The ball will hit the ground approximately 5.07 meters beyond the net.

To answer these questions, we need to use the equations of motion for projectile motion.

(a) The vertical component of initial velocity required to barely clear the 1.00 m high net can be determined using the equation:

y = y0 + v0y * t - (1/2) * g * t^2

Where:

y is the vertical displacement (1.00 m)

y0 is the initial vertical position (0 m)

v0y is the vertical component of the initial velocity (what we need to find)

t is the time of the flight

g is the acceleration due to gravity (-9.8 m/s^2)

We can solve for v0y:

1.00 m = 0 + v0y * t - (1/2) * (-9.8 m/s^2) * t^2

Simplifying the equation, we get:

v0y * t = (1/2) * 9.8 m/s^2 * t^2 + 1.00 m

v0y = (1/2) * 9.8 m/s^2 * t + 1.00 m / t

Since the ball barely clears the net, it means that the vertical displacement at the time of flight (t) is equal to 1.00 m. Therefore, we can substitute t = sqrt(2 * y / g) into the equation:

v0y = (1/2) * 9.8 m/s^2 * sqrt(2 * 1.00 m / 9.8 m/s^2) + 1.00 m / sqrt(2 * 1.00 m / 9.8 m/s^2)

Calculating the expression, we get:

v0y ≈ 1.41 m/s

Therefore, the vertical component of the initial velocity required to barely clear the 1.00 m high net is approximately 1.41 m/s.

(b) To determine how far beyond the net the ball will hit the ground, we need to find the horizontal distance traveled by the ball during the time of flight (t). The horizontal distance can be calculated using the equation:

x = v0x * t

Since there is no horizontal acceleration, the horizontal component of the initial velocity (v0x) remains constant throughout the motion.

The initial velocity (v0) can be found using the Pythagorean theorem:

v0 = sqrt(v0x^2 + v0y^2)

Given that the initial speed is 25.0 m/s, we have:

25.0 m/s = sqrt(v0x^2 + (1.41 m/s)^2)

Solving for v0x, we get:

v0x ≈ sqrt((25.0 m/s)^2 - (1.41 m/s)^2)

v0x ≈ 24.99 m/s

Now we can calculate the horizontal distance traveled by the ball:

x = v0x * t = 24.99 m/s * t

Since we already determined t = sqrt(2 * y / g), we can substitute this value into the equation:

x ≈ 24.99 m/s * sqrt(2 * 1.00 m / 9.8 m/s^2)

Calculating the expression, we get:

x ≈ 5.07 m

Therefore, the ball will hit the ground approximately 5.07 meters beyond the net.

To learn more about projectile motion click here

https://brainly.com/question/33518841

#SPJ11

Answer:

The correct statements are:

- The amount the hammer forces the nail is the same as the amount the nail forces the hammer.

- Normal forces keep objects from moving through surfaces.

- All objects always have a normal force acting on them.

- When in orbit around the Earth, objects have essentially no weight.

Explanation:

The force the hammer exerts on the nail is the same as the force the nail exerts on the hammer, according to Newton's third law of motion: "For every action, there is an equal and opposite reaction." Therefore, the amount the hammer forces the nail is the same as the amount the nail forces the hammer.

Regarding the statements about the normal force:

- Surface friction is a type of force, but not a type of normal force. So, the statement "Surface friction is a type of normal force" is false.

- The normal force is not always vertical. It acts perpendicular to the surface with which an object is in contact. So, the statement "The normal force is always vertical" is false.

- Normal forces can act to prevent objects from moving through surfaces, so the statement "Normal forces keep objects from moving through surfaces" is true.

- The normal force can be a push or a pull, depending on the situation. So, the statement "Normal force is always a push, never a pull" is false.

- All objects have a normal force acting on them when they are in contact with a surface, so the statement "All objects always have a normal force acting on them" is true.

Regarding weight/mass:

- When in orbit around the Earth, objects experience weightlessness because they are in freefall, but they still have mass. So, the statement "When in orbit around the Earth, objects have essentially no weight" is true.

- The mass of an object remains the same regardless of its height above the Earth's surface. So, the statement "Objects have less mass the higher they are off the surface of the Earth" is false.

- Mass and weight are different concepts. Mass is a measure of the amount of matter in an object, while weight is the force exerted on an object due to gravity. So, the statement "Mass and weight are equivalent terms for the same concept" is false.

- According to Newton's third law, the force of gravity between the Earth and an object is equal in magnitude but opposite in direction. So, the Earth pulls on an object with the same force as the object pulls on the Earth. Thus, the statement "The Earth pulls on you more than you pull on the Earth" is false.

- Objects in orbit around the Earth still have mass; it is just that they are in a state of continuous freefall, resulting in the feeling of weightlessness. So, the statement "When in orbit around the Earth, objects have essentially no mass" is false.

Therefore, the correct statements are:

- The amount the hammer forces the nail is the same as the amount the nail forces the hammer.

- Normal forces keep objects from moving through surfaces.

- All objects always have a normal force acting on them.

- When in orbit around the Earth, objects have essentially no weight.

Learn more about Newton's law of motion: https://brainly.com/question/28171613

#SPJ11

To find the RMS electric and magnetic fields at a distance of 5.00 m from a lightbulb radiating 90.0 W of light uniformly in all directions, we can use the formulas relating power to electric and magnetic fields in electromagnetic radiation.

(a) RMS Electric Field (E):

The formula relating power to the electric field is:

P = (1/2) * ε₀ * c * E²

where ε₀ is the vacuum permittivity and c is the speed of light in a vacuum.

To find the RMS electric field (E), we rearrange the equation:

E = √(2 * P / (ε₀ * c))

Substituting the given values:

E = √(2 * 90.0 W / (8.854 × 10⁻¹² F/m * 3.00 × 10⁸ m/s))

Calculate the value of E using the above formula.

(b) RMS Magnetic Field (B):

The relationship between the electric and magnetic fields in electromagnetic radiation is given by:

B = E / c

where B is the RMS magnetic field and c is the speed of light in a vacuum.

Substituting the value of E calculated above, we can find B.

Calculate the value of B using the above formula.

Learn more about RMS electric fields from :

https://brainly.com/question/12906838

#SPJ11

Average velocity in the first interval, v1 = 5.17 m/s in the positive direction Average velocity in the second interval, v2 = -1.75 m/s in the negative directionAverage velocity in the third interval, v3 = 4.42 m/s in the positive directionAverage velocity for the entire motion, v = 3.56 m/s in the positive direction.

Given, Distance moved by the quarterback in the first interval,

Δx1 = 15.0 m

Time taken in the first interval, Δt1 = 2.90 s

Distance moved by the quarterback in the second interval, Δx2 = -3.00 m (since the quarterback is pushed backward)

Time taken in the second interval, Δt2 = 1.71 s

Distance moved by the quarterback in the third interval, Δx3 = 23.0 m

Time taken in the third interval, Δt3 = 5.205 s(a)

Average velocity in the first interval

,v1 = Δx1 / Δt1

= 15.0 / 2.90

= 5.17 m/s in the positive direction (since the quarterback is moving straight down the playing field)

Average velocity in the second interval,

v2 = Δx2 / Δt2= (-3.00) / 1.71

= -1.75 m/s in the negative direction (since the quarterback is pushed backward)

Average velocity in the third interval,

v3 = Δx3 / Δt3= 23.0 / 5.205

= 4.42 m/s in the positive direction (since the quarterback is moving straight forward)

The average velocity for the entire motion is given as:

v = (Δx1 + Δx2 + Δx3) / (Δt1 + Δt2 + Δt3)

= (15.0 - 3.00 + 23.0) / (2.90 + 1.71 + 5.205)

= 35.0 / 9.815

= 3.56 m/s in the positive direction (since the quarterback's initial direction is positive).

To know more about Average velocity visit:-

https://brainly.com/question/28512079

#SPJ11

The transfer function G(y/u) is obtained by transforming the state-space model into the Laplace domain and then manipulating the equations to find the desired response.

a) To find the transfer function G(y/u), we need to first write the state-space model in matrix form.

The state equation is given by:
[tex]dx/dt = Ax + Bu[/tex]
Where A is the state matrix and B is the input matrix. In this case,
[tex]A = [0 -1; 1 -2] and B = [0; 1].[/tex]
The output equation is given by:
[tex]y = Cx[/tex]
Where C is the output matrix. In this case,

[tex]C = [1 0].[/tex]
To find the transfer function, we need to transform the state-space model into the Laplace domain. The Laplace transform of the state equation is:
[tex]sX(s) - x(0) = AX(s) + BU(s)[/tex]
Rearranging the equation, we get:
[tex](sI - A)X(s) = BU(s) + x(0)[/tex]
Taking the inverse Laplace transform, we get:
[tex]dx/dt = AX + Bu[/tex]
Now, we can substitute the values of A and B to get the transfer function G(s):
[tex]sX(s) - x(0) = [ s 1 ] [ X1(s) ] + [ 0 ] [ U(s) ][/tex] [tex][ X2(s) ][/tex]
[tex]sX1(s) - x1(0) = sX1(s) + X2(s)[/tex]
[tex]sX2(s) - x2(0) = X1(s) - 2X2(s)[/tex]
From the output equation, we have:
[tex]Y(s) = [ 1 0 ] [ X1(s) ]  [ X2(s) ][/tex]
By substituting the values, we can obtain the transfer function G(s) = Y(s)/U(s).
b) To find the steady-state response to a unit step input function, we need to set [tex]U(s) = 1/s[/tex] and find the value of Y(s) at

[tex]s = 0[/tex].
c) To find the steady-state response to a sinusoidal input function [tex]u = sin(2t)[/tex], we need to find the frequency response of the system. The frequency response is obtained by substituting  the transfer function G(s) and then taking the inverse Laplace transform.

To know more about domain visit:

https://brainly.com/question/30133157

#SPJ11

The free-body diagram of a bird that lands on a wire midway between two telephone poles is shown below.

Hence, the tension that the bird produces in the wire is approximately 97.3 N.

First, let's draw the free-body diagram of the bird shown below.FBD:If we consider the wire on which the bird lands, the tension T exists in both directions, one of which is pulling up and the other is pulling down.

The gravitational force of the earth (Fg) acts on the bird and pulls it down. The bird is in equilibrium, so the two forces (T and Fg) are equal and opposite, as shown in the free-body diagram above.The distance between two telephone poles is 54.4 m.

The sag of the wire, or how much the wire stretches when the bird lands on the wire midway between the poles, is 0.190 m.The wire is considered to be in a uniform gravitational field since it is nearly parallel to the earth's surface. Therefore, we may make the following calculations based on the wire's gravitational force:Fg = mg = (1.00 kg)(9.80 m/s²) = 9.80 N

The tension in the wire may be calculated using the following formula:T = Fg/2 + Fg·x²/2L²where L is the span length of the wire and x is the sag of the wire. Substituting the values we get:T = (9.80 N/2) + (9.80 N)(0.190 m)²/[2(54.4 m)]≈97.3 N

Thus, the tension that the bird produces in the wire is approximately 97.3 N.

learn more about gravitational field

https://brainly.com/question/28437652

#SPJ11

The acceleration of the blocks is determined as 0.62 m/s².

The acceleration of the blocks is calculated by applying Newton's second law of motion as follows;

F(net) = ma

where;

F(net) = m₂g  -  μm₁g

F(net) = (9.9 x 9.8) - (0.63 x 7.9 x 9.8)

F(net) = 48.25 N

The acceleration of the blocks is calculated as;

a = F(net) / m

a = ( 48.25 N ) / (7.9 + 9.9)

a = 0.62 m/s²

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ4

The complete question is below:

A block with mass m1 = 7.9 kg rests on the

surface of a horizontal table which has a coefficient of kinetic

friction of μk = 0.63. A second block with a

mass m2 = 9.9 kg is connected to the first by a pulley. Find the acceleration of the two blocks.