A sample of gas occupies 10.0 L at 240°C under a pressure of
80.0 kPa. At what temperature would the gas occupy 20.0 L if
we increased the pressure to 107 kPa?

Answer:

I'll see it

Explanation:

Answer:

In the laboratory, methane is formed by heating sodium ethanoate with a mixture of sodium hydroxide and calcium oxide, called soda lime, on heating in the presence of a catalyst, calcium oxide, the -COONa group from sodium ethanoate is replaced by the hydrogen atom from sodium hydroxide, forming methane and sodium

Explanation:

Answer:

The answer is "17200 years".

Explanation:

Given:

[tex]A = 20 \ \frac{counts}{minute}\\\\A_{o} = 160\ \frac{counts}{minute}[/tex]

Let the half-life of carbon-14, is beta emitter, is [tex]T = 5730\ years[/tex]

Constant decay [tex]\ w = \frac{0.693}{ T}[/tex]

[tex]= 1.209 \times 10^{-4} \ \frac{1}{year}\\[/tex]

The artifact age [tex]t= ?[/tex]

[tex]A = A_{o} e^{-wt} \\\\e^{-wt} = \frac{A}{A_{o}}\\\\-wt = \ln \frac{A}{A_{o}}\\\\= -2.079\\\\t = 1.7199 \times 10^{4} \ years\\\\\sim \ 17200\ years\\[/tex]

Answer:

Molarity = Moles of solute/Volume of solution(in Litres)

Solute = C10H12

moles of solute = Mass/Molar Mass

Molar Mass of C10H12 = 10(12) + 12(1)

= 132gmol-¹

Mole = 45.7/132 = 0.346mol

Molarity = 0.346/5.23

=0.066M

Answer: A buffer solution reacts with basic solutions.

A buffer solution resists small changes in pH.

A buffer solution reacts with acidic solutions.

Explanation:

A buffer solution simply refers to an aqueous solution that consist of a mixture of a weak acid and the conjugate. From the options given, the ones application to a buffer solution include:

• A buffer solution reacts with basic solutions.

• A buffer solution resists small changes in pH.

• A buffer solution reacts with acidic solutions.

Answer:

25.5mL of 0.100M NaOH are needed to reach buffer capacity.

Explanation:

The buffer capacity is reached when the ratio between moles of conjugate base (Sodium acetate) and moles of weak acid (Acetic acid) is 10:

Moles sodium acetate / Moles Acetic acid = 10

The reaction of acetic acid, HA, with NaOH, to produce sodium acetate, NaA is:

HA + NaOH → H2O + NaA

That means the moles of NaOH added = Moles of HA that are being subtracted and moles of NaA that are been produced.

The initial moles of each species is:

Acetic acid:

23.34mL = 0.02334L * (0.147mol / L) = 0.00343 moles Acetic Acid

Sodium Acetate:

33.66mL = 0.03366L * (0.185mol / L) = 0.00623 moles Sodium Acetate

We can write the moles of each species when NaOH is added as:

Moles sodium acetate / Moles Acetic acid = 10

0.00623 moles + X / 0.00343 moles - X = 10

Where X are moles of NaOH added

Solving for X:

0.00623 moles + X = 0.0343 moles - 10X

11X = 0.0281

X = 0.00255 moles of NaOH are needed

In Liters:

0.0255mol NaOH * (1L / 0.100mol) = 0.0255L of 0.100M NaOH are needed =

Answer:

heat

Explanation:

because it's the cause of change

Answer:

heat

Explanation:

because it is a natural factor that causes the change in Earth's system

Answer:

"[tex]6.7\times 10^{-4} \ atm[/tex]" is the right answer.

Explanation:

Given:

Partial pressure of [tex]N_2[/tex],

= 0.20 atm

Partial pressure of [tex]H_2[/tex],

= 0.15 atm

[tex]K_p = 1.5\times 10^3[/tex] at [tex]400^{\circ} C[/tex]

As we know,

⇒ [tex]K_p = \frac{pN_2\times pH_2^3}{pNH_3^2}[/tex]

By putting the values, we get

    [tex]1.5\times 10^3=\frac{0.20\times (0.15)^3}{pNH_3^2}[/tex]

        [tex]pNH_3^2 = \frac{0.000675}{1.5\times 10^3}[/tex]

                    [tex]=6.7\times 10^{-4} \ atm[/tex]

Answer:

6.684g

Explanation:

Here, we can use the mole ratio of the gases to calculate.

We know that the mole ratio of the gases equate to their number of moles.

Firstly, we calculate the number of moles of the oxygen gas. The number of moles of the oxygen gas is equal to the mass of the oxygen gas divided by the molar mass of the oxygen gas. The molar mass of the oxygen gas is 32g/mol

Thus, the number of moles produced is 5.98/32 = 0.186875

Where do we move from here?

We know that if we place the partial pressure of oxygen over the total pressure, this would be equal to the number of moles of oxygen divided by the total number of moles. Now let’s do this.

449/851 = 0.186875/n

n =(0.186875 * 851)/449

n = 0.3542

Now we do the same for argon to get the number of moles of argon.

Firstly, we use dalton’s partial pressure law to get the partial pressure of argon. In the simplest form, the partial pressure of argon is the total pressure minus the partial pressure of oxygen.

P = 851 - 449 = 402 mmHg

We now use the mole ratio relation.

402/851 = n/0.3542

n = (402 * 0.3542) / 851

n = 0.1673

Since we now know the number of moles of argon, we can use this multiplied by the atomic mass of argon to get the mass.

The atomic mass of argon is 39.948 amu

The mass is thus 39.948 * 0.1673 = 6.684g

Answer:

hello? are you still here? reply if you are

В

an echo is caused by the fact that waves can be reflected by solid surfaces, this is due to the dynamic pattern of rarefactions and air seals near the reflecting surface

Answer:

11.76 g/cm^3

Explanation:

Mass of empty flask and stopper = 64.232g

Mass of flask filled with water = 153.617 g

Mass of water = 153.617 g - 64.232g = 89.385 g

Mass of flask, stopper and metal = 143.557 g

Mass of metal = 143.557 g - 64.232g = 79.325 g

Mass of water, flask, stopper and metal = 226.196 g

Mass of water = 226.196 g - 143.557 g = 82.639 g

Since mass of water =volume of water

Volume occupied by metal = 89.385 cm^3 - 82.639 cm^3 = 6.746 cm^3

Density of metal = mass/volume = 79.325 g/6.746 cm^3

= 11.76 g/cm^3

Answer:

+3

Explanation:

u see sum of oxidation number in all situations have to be 0

ClO2 =-1

so Fe is +3

Answer:

C . Kinetic Molecular Theory

Answer

A

Explanation:

due to high specific heat capacity it loses heat and has low temperature

Answer: 24 kcal

Explanation:

Given

Mass of water [tex]m=0.3\ kg[/tex]

Temperature of water [tex]T_1=0^{\circ}[/tex]

Heat of fusion [tex]L_f=80\ cal/g[/tex]

Heat of vaporization [tex]L_v=540\ cal/g[/tex]

Specific heat of water [tex]c=1\ cal/g.^{\circ}C[/tex]

Heat require to melt the ice is

[tex]\Rightarrow Q=mL_f\\\Rightarrow Q=0.3\times 1000\times 80\\\Rightarrow Q=24000\ cal\ or\ 24\ kcal[/tex]

Thus, 24 kcal of heat is required to melt 0.3 kg of ice.

An isotope is an element with the same atomic number but different mass number due to differences in number of neutrons.

electron configuration is 2,8,6.

Belongs to group 6 and period group 3.

It forms an ion by accepting 2 electrons

Answer:

nucleus is a collection of particles called protons,which are positively charged..and neutrons which are electrically neutral..electrons which are negatively charged..and neutrons are in turn made up of particles called quarks ..

Explanation:

hope this helps u ...

Answer:

The Nucleus is made up of protons and neutrons.

Answer:

1. Because the rules will keep you safe it prevents you from getting hurt.

2.i) don't taste chemical

ii) Always wear protective gears

iii) be careful with tool

iv) wear protective gloves

Explanation:

help everyone get out quickly

The half life of a radioactive isotope refers to the time taken for half of the number of original number of atoms present in the sample to decay.

The equation below gives the number of atoms present at time t

[tex]N=Noe^-kt[/tex]

N = Number of atoms present at time t

No = Number of atoms initially present

k = decay constant

t = time taken

Given that;

t1/2 = 0.693/k

where t1/2 = half life

k = 0.693/t1/2

k = 0.693/ 55.6 s

k = 0.0125 s-1

Substituting values;

N = 16,000 e^-0.0125(0)

N = 16,000 atoms

At 50 s

N = 16,000 e^-0.0125(50)

= 8564 atoms

At 100 s

N = 16,000 e^-0.0125(100)

= 4584 atoms

At 200 s

N = 16,000 e^-0.0125(200)

= 1313 atoms

https://brainly.com/question/2998270

Answer:

2Li(s) + F2(g)→2LiF(s)

Explanation:

Answer:

17

Explanation:

Step 1: Calculate the needed concentrations

[A]i = 1.00 mol/5.00 L = 0.200 M

[B]i = 1.80 mol/5.00 L = 0.360 M

[B]e = 1.00 mol/5.00 L = 0.200 M

Step 2: Make an ICE chart

        A(aq) + 2 B(aq) ⇄ C(aq)

I       0.200    0.360        0

C        -x           -2x         +x

E     0.200-x  0.360-2x   x

Then,

[B]e = 0.360-2x = 0.200

x = 0.0800

The concentrations at equilibrium are:

[A]e = 0.200-0.0800 = 0.120 M

[B]e = 0.200 M

[C]e = 0.0800 M

Step 3: Calculate the concentration equilibrium constant (K)

K = [C] / [A] × [B]²

K = 0.0800 / 0.120 × 0.200² = 16.6 ≈ 17

Answer:

helps

Explanation:

Answer:

1. Pyruvate reacts with TPP and is decarboxylated forming hydroxyethyl-TPP.

2. The lipoamide arm of E2 moves to the active site of E1, enabling the transfer of the acetyl group to the lipoamide.

3. The acetyl lipoamide arm of E2 moves to the active site of E2, where the acetyl group is transferred to CoA, forming acetyl-CoA and the reduced form of lipoamide.

4. The lipoamide arm moves to the active site of E3 where the reduced lipoamide is oxidized by FAD forming the active lipoamide and FADH2.

5. FADH2 is reoxidized to FAD reducing NAD+ to NADH.

Explanation:

The oxidation of pyruvate to AcetylCoA is catalyzed by the pyruvate dehydrogenase complex. The reaction is an irreversible oxidative decarboxylation process in which the carboxyl group of pyruvate is removed as a molecule of carbon dioxide, CO₂, while the remaining two carbons are attached to a CoASH molecule to form acetylCoA.

The pyruvate dehydrogenase complex contains three enzymes - Pyruvate dehydrogenase known as E₁, dihydrolipoyl transacetylase known as E₂, and dihydrolipoyl dehydrogenase known as E₃. It also requires five coenzymes namely: thiamine pyrophosphate (TPP), flavine adenine dinucleotide (NAD), coenzyme A (CoA-SH), nicotinamide adenine dinucleotide (NAD) and lipoate.

Oxidative decorbyxylation of pyruvate takes place in the pyruvate dehydrogenase complex in five steps:

1. Pyruvate reacts with TPP and is decarboxylated forming hydroxyethyl-TPP.

2. The lipoamide arm of E2 moves to the active site of E1, enabling the transfer of the acetyl group to the lipoamide.

3. The acetyl lipoamide arm of E2 moves to the active site of E2, where the acetyl group is transferred to CoA, forming acetyl-CoA and the reduced form of lipoamide.

4. The lipoamide arm moves to the active site of E3 where the reduced lipoamide is oxidized by FAD forming the active lipoamide and FADH2.

5. FADH2 is reoxidized to FAD reducing NAD+ to NADH.

N₂ + 3H₂ ⇄ 2NH₃ + heat

In the given equilibrium, we notice that the heat is on the right. which means that if the heat requirements don't meet, the reactants on the right will no longer react due to the lack of heat

but because the reactants on the left don't have such weaknesses, they will keep reacting hence producing more and more ammonia until a new equilibrium is reached

where there will be more ammonia and less nitrogen and hydrogen as compared to the equilibrium we had initially

Answer:

Explanation:

heat is given out as 1 of the products, along w/ NH3 in the forward reaction. so its an exothermic reaction

decreasing temperature favors exothermic reaction as more heat can be absorbed by the environment

so equilibrium will shift towards the products

Answer:

The energy required to break a covalent bond

Explanation:

When a chemical bond is formed, energy is released. When a chemical bond is broken, energy is absorbed.

We define the bond dissociation energy as the energy required to break a covalent bond. The process of covalent bond cleavage is endothermic hence energy is absorbed for the process to occur.

Explanation:

here's the answer to the question

Answer:

CuSO4(s) + 5H2O(l) ----> CuSO4.5H2O(s)

Explanation:

Hydration is the process by which anhydrous CuSO4 acquires molecules of water of crystalization to form the pentahydrate.

The water of crystalization becomes attached go the crystals of the CuSO4 to form the hydrated salt.

Beginning with solid anhydrous CuSO4 we have;

CuSO4(s) + 5H2O(l) ----> CuSO4.5H2O(s)