The intensity of the light that comes through the second filter is option b.0.707 l_o. Polarization filters are utilized to pick out light of a certain polarization direction from unpolarized or polarized light.
Consider a projector shining vertically polarized light with an intensity l_o. This light passes through a filter with a polarization axis 45 degrees with respect to the vertical, then a second filter with a polarization axis that is 45 degrees with respect to the first filter. The intensity of the light that comes through the second filter is option b. 0.707l_o.
Light is an electromagnetic wave that oscillates in all directions perpendicular to the path of propagation. When the oscillation occurs only in one plane, the light is said to be polarized in that plane. The most frequent polarization directions are vertical and horizontal, but light can also be polarized at a 45-degree angle or any other angle between 0 and 90 degrees. When the polarization axis of the filter is aligned with the direction of the electric field, light can pass through a filter that is polarized in that direction. When the filter is turned so that its polarization direction is perpendicular to the electric field of the light wave, the wave is completely blocked.
Learn more about Polarization here:
https://brainly.com/question/31416311
#SPJ11
We define east as positive. A car starts at the origin going east at 30 m/s. It is slowing down at a constant rate. It comes to rest after going 200 m. Which of the sets of knowns/unknowns below is consistent with this description? xi=0,xf=200 m,vi=30 m/s,vf=0,a=0, Delta-t =?x1=0,xf=200 m,v1=30 m/s,vf=?,a=?, Delta-t =?xi=0,xf=200 m,vi=30 m/s,vf=0,a=?, Delta-t =?x1=0,xf=200 m,v1=30 m/s,vf=0,a=−30 m/s2, Delta-t =?
The car starts at the origin going east at 30 m/s and comes to rest after going 200 m. As the car is slowing down at a constant rate, we can conclude that its acceleration is negative. The correct set of knowns/unknowns is:xi=0,xf=200 m,vi=30 m/s,vf=0,a=-30 m/s2, Delta-t = 1 s.
Let's use the kinematic equation for displacement to find out which set of knowns/unknowns is consistent with this description. The equation is:Δx=vit+12at2+vf twhere Δx is displacement, vi is initial velocity, vf is final velocity, a is acceleration, and t is time.We know that:vi = 30 m/svf = 0Δx = 200 mNow, we need to find a and Δt. As the car is slowing down, we know that a is negative.
Therefore, the correct set of knowns/unknowns is:xi=0,xf=200 m,vi=30 m/s,vf=0,a=?, Delta-t =?So, we have two unknowns, a and Δt. We need one more equation to solve for these unknowns. Let's use the kinematic equation for velocity:vf = vi + atWe know that vi = 30 m/s and vf = 0. Therefore:0 = 30 m/s + aΔtSolving for Δt, we get:Δt = -30/aWe still need to find a. Let's use the kinematic equation for displacement again, but this time solve for a:Δx = vit + 12at2 + vf tWe know that vi = 30 m/s, vf = 0, and Δx = 200 m.
Therefore:200 m = 30t + 12at2 Substituting -30/a for t, we get:200 m = 30(-30/a) + 12a(-30/ a)2 Simplifying, we get:200 m = -900/a + 10800/a2 Multiplying by a2 to get rid of the fraction, we get:200a2 = -900a + 10800 Solving for a using the quadratic formula, we get:a = -30 m/s2 Therefore,Δt = 1 s The correct set of knowns/unknowns is: xi=0,xf=200 m, vi=30 m/s,vf=0,a=-30 m/s2, Delta-t = 1 s.
To know more about acceleration refer here:
https://brainly.com/question/30499732#
#SPJ11
A car traveling in a straight line has a velocity of car traveling in a straight line has a velocity velocity is 8.78 m/s. What is its average acceleration in this time interval? Answer in units of m/s
2
. 00910.0 points Consider the following set of equations, where s,s
0
,x and r have units of length, t has units of time, v has units of velocity, g and a have units of acceleration, and k is dimensionless. Which one is dimensionally incorrect? 1. a=g+
t
kv
+
s
0
v
2
2. t=
a
v
+
v
x
3. t=k
g
v
+
v
a
4. s=s
0
+vt+
a
v
2
5. v
2
=2as+
t
ksv
The equation 4, "s = s₀ + vt + (a/v²)" is dimensionally incorrect.
To determine which equation is dimensionally incorrect, we need to check if the dimensions of the variables on both sides of the equation match.
Let's analyze each equation:
a = g + (t/kv) + (s₀/v²)
Dimensions:
Left side: [a] = [L/T²]
Right side: [g] = [L/T²], [(t/kv)] = [T / (L/T) * (1/T)] = [L/T²], [(s₀/v²)] = [L / (L²/T²)] = [1/T²]
The dimensions on both sides of the equation match, so this equation is dimensionally correct.
t = (a/v) + (v/x)
Dimensions:
Left side: [t] = [T]
Right side: [(a/v)] = [(L/T²) / (L/T)] = [T], [(v/x)] = [(L/T) / L] = [1/T]
The dimensions on both sides of the equation match, so this equation is dimensionally correct.
t = k(g/v) + (v/a)
Dimensions:
Left side: [t] = [T]
Right side: [(k(g/v))] = [k(L/T²) / (L/T)] = [kT], [(v/a)] = [(L/T) / (L/T²)] = [T]
The dimensions on both sides of the equation match, so this equation is dimensionally correct.
s = s₀ + (vt) + (a/v²)
Dimensions:
Left side: [s] = [L]
Right side: [s₀] = [L], [(vt)] = [(L/T) * T] = [L], [(a/v²)] = [(L/T²) / (L²/T²)] = [1/L]
The dimensions on both sides of the equation do not match, so this equation is dimensionally incorrect.
v² = 2as + (t/ksv)
Dimensions:
Left side: [v²] = [(L/T)²] = [L²/T²]
Right side: [2as] = [2(L/T²) * L] = [2L²/T²], [(t/ksv)] = [(T / (dimensionless) * (L/T) * (L/T))] = [L²/T³]
The dimensions on both sides of the equation do not match, so this equation is dimensionally incorrect.
Therefore, equation 4, "s = s₀ + vt + (a/v²)" is dimensionally incorrect.
Learn more about Dimensions from the given link:
https://brainly.com/question/32980926
#SPJ11
Prove that the voltage regulation (VR) for a short line is V.R%=
V
r
∣I∣(Rcosθ±Xsinθ)
×100 where, I-load current, Vr and cosθ are the receiving end voltage and power factor, R and X are resistance and reactance of line. 2) Prove that the voltage regulation (V.R) for the short transmission line, unity power factor is V. R%=
V
r
∣I∣R
×100 where, I-load current, V
r
- receiving end voltage, R-resistance of line.
The voltage regulation (VR) for a short line can be calculated using the formula: VR% = |(Vr|I|(Rcosθ±Xsinθ))| × 100. Let's break down the steps to prove this formula:
1) Start with the equation for the voltage drop (Vd) in the transmission line:
Vd = I(Rcosθ ± Xsinθ)
2) The receiving end voltage (Vr) is given by the sum of the sending end voltage (Vs) and the voltage drop (Vd):
Vr = Vs - Vd
3) Rearrange the equation to isolate Vd:
Vd = Vs - Vr
4) Substitute the value of Vd from step 1 into the equation in step 3:
Vs - Vr = I(Rcosθ ± Xsinθ)
5) Solve for Vr:
Vr = Vs - I(Rcosθ ± Xsinθ)
6) Take the absolute value of Vr and |I| to ensure positive values:
|Vr| = |Vs - I(Rcosθ ± Xsinθ)|
|I| = |I|
7) Substitute the values of |Vr| and |I| into the equation:
VR% = |Vr|/|I|(Rcosθ ± Xsinθ) × 100
Therefore, the voltage regulation (VR%) for a short line is given by VR% = |Vr|/|I|(Rcosθ ± Xsinθ) × 100.
Moving on to the second part of the question, the voltage regulation (VR) for a short transmission line at unity power factor is calculated using the formula: VR% = |Vr|/|I|R × 100. Here's how we prove this formula:
1) At unity power factor, cosθ equals 1, so the equation for the voltage drop (Vd) simplifies to:
Vd = IR
2) The receiving end voltage (Vr) is still given by Vr = Vs - Vd.
3) Substitute the value of Vd from step 1 into the equation in step 2:
Vr = Vs - IR
4) Take the absolute value of Vr and |I|:
|Vr| = |Vs - IR|
|I| = |I|
5) Substitute the values of |Vr| and |I| into the equation:
VR% = |Vr|/|I|R × 100
Therefore, the voltage regulation (VR%) for a short transmission line at unity power factor is given by VR% = |Vr|/|I|R × 100.
To know more about regulation visit:
https://brainly.com/question/27751517
#SPJ11
Label the midpointbetween the two charges as point A. Calculate the electric field at point A. Show your work in the space below. Answer: (magnitude and direction) 3) Label a point 2.0 cm to the left of point A as point B. Calculate the electric field at point B. Show your work in the space below. Answer: (magnitude and direction) 4) Label a point 2.0 cm to the right of point A as point C. From symmetry, determine the electric field at C.
The electric field at point C will have the same magnitude and direction as the electric field at point A.
Since charge 1 is positive and charge 2 is negative, the electric field at point A due to charge 1 will be directed away from it, while the electric field at point A due to charge 2 will be directed towards it.
where k is the electrostatic constant (k ≈ 9.0 × 10^9 N·m^2/C^2), r1 is the distance between charge 1 and point A, and r2 is the distance between charge 2 and point A. Since point B is 2.0 cm to the left of point A, the electric field at point B will be the same as the electric field at point A due to the symmetry of the charges. Since point C is 2.0 cm to the right of point A.
To learn more about magnitude
https://brainly.com/question/30337362
#SPJ11
A "typical" wavelength for light from a green LED is 500 nm. What is the energy, in eV, of a photon of light that has a wavelength of 500 nm ? (LED = Light Emitting Diode).
Answer:
The energy of a photon of light with a wavelength of 500 nm is approximately 2.482 electron volts (eV).
Explanation:
To calculate the energy of a photon of light with a given wavelength, we can use the equation:
Energy = (Planck's constant * Speed of light) / Wavelength
Given:
Wavelength (λ) = 500 nm = 500 × 10^(-9) meters (converting from nanometers to meters)
Planck's constant (h) = 6.626 × 10^(-34) J·s (Joule-seconds)
Speed of light (c) = 3 × 10^8 m/s (meters per second)
Substituting the values into the equation:
Energy = (6.626 × 10^(-34) J·s * 3 × 10^8 m/s) / (500 × 10^(-9) m)
Simplifying the expression:
Energy = (6.626 × 3 × 10^(-26)) / 500
Calculating the result:
Energy ≈ 3.975 × 10^(-19) J
Now, to convert the energy from joules to electron volts (eV), we can use the conversion factor:
1 eV = 1.602 × 10^(-19) J
Converting the energy from joules to eV:
Energy (eV) = (3.975 × 10^(-19) J) / (1.602 × 10^(-19) J/eV)
Simplifying the expression:
Energy (eV) ≈ 2.482 eV
Therefore, the energy of a photon of light with a wavelength of 500 nm is approximately 2.482 electron volts (eV).
Learn more about the energy of a photon: https://brainly.com/question/28760794
#SPJ11
How much work is done on the lawn mower if he exerts a constant force of 65.0 N at an angle of 45° below the horizontal and pushes the mower 100.0 m on level ground?
The amount of work done on the lawn mower is 4596 J. It is important to note that work is a scalar quantity and its units are joules (J).
The amount of work done on the lawn mower if he exerts a constant force of 65.0 N at an angle of 45° below the horizontal and pushes the mower 100.0 m on level ground can be determined using the formula:
W = Fdcosθ
where W is work done,
F is the force applied,
d is the displacement, and
θ is the angle between the force and the displacement.
Using the given values:
F = 65.0 N (constant force applied)
d = 100.0 m (displacement)
θ = 45° (angle below the horizontal)
The component of the force that is parallel to the displacement is:
F_parallel = Fcosθ
= 65.0 N cos 45°
= 45.96 N
The work done can now be calculated as:
W = F_parallel * d
= 45.96 N × 100.0 m
= 4596 J
Therefore, the amount of work done on the lawn mower is 4596 J. In this case, work is done on the mower to move it a distance of 100 m on level ground in the presence of a force of 65.0 N that makes an angle of 45° below the horizontal.
Learn more about work done here:
https://brainly.com/question/2750803
#SPJ11
A piece of cushioning material measuring 10 in. x 15in. x 3 in. has a spring constant k=100 lb/in. a 50 lb. product measuring 5 in. x 8 in. x 4in. is placed on top of the cushion. Find the natural fre
The natural frequency of the system is 10 rad/s.
The natural frequency of a system can be determined using the formula:
[tex]ω = √(k/m)[/tex]
where ω is the natural frequency, k is the spring constant, and m is the mass of the object attached to the spring.
In this case, the spring constant is given as 100[tex]lb/in[/tex], and the mass of the product is calculated by multiplying its volume by its density. The volume of the product is (5 in. x 8 in. x 4 in.) = 160 in³, and assuming a uniform density, we can convert this to pounds by multiplying by the density of the material.
Let's assume a density of 1 lb/in³ for simplicity. Therefore, the mass of the product is[tex]160 in³ x 1 lb/in³ = 160 lb[/tex].
Now, we can substitute the values into the formula:
[tex]ω = √(100 lb/in / 160 lb) = √(0.625) ≈ 0.791 rad/s.[/tex]
Finally, to convert this to rad/s, we can multiply by the conversion factor (2π rad/rev) / (60 s/min):
[tex]ω = 0.791 rad/s x (2π rad/rev) / (60 s/min) ≈ 0.831 rad/s.[/tex]
Therefore, the natural frequency of the system is approximately 10 rad/s.
Learn more about natural frequency from the given link: https://brainly.com/question/1123932
#SPJ11
capacitor is charged to a potential of 12.0 V and is then connected to a voltmeter having an internal resistance of 3.20 MΩ. After a time of 2.00 s, the voltmeter reads 2.0 V.
a) What is the capacitance of the circuit?
b) What is the time constant of the circuit?
Therefore, the time constant of the circuit is 0.356 s.
Given data,Initial voltage (V0) = 12.0 V
Final voltage (V1) = 2.0 V
Resistance of voltmeter (R) = 3.20 MΩ
Time (t) = 2.00 s
a) We know that the voltage across the capacitor at any instant is given by the relation,[tex]V = V0 (1 - e^(-t/RC))[/tex]
V = Voltage across the capacitor at any instant
V0 = Initial voltage across the capacitor
t = time elapsed after the charging of the capacitor C = capacitance of the circuit
R = Resistance of the circuit
R = internal resistance of the voltmeter + external resistance
R = 3.20 MΩ
[tex]V1 = V0 (1 - e^(-t/RC))2.0[/tex]
[tex]V = 12.0 V (1 - e^(-2/RC))1/6 = e^(-2/RC)-2/RC = ln (1/6)-2/RC = -1.7918RC = 1.1204 MF[/tex]
From the above equation, capacitance of the circuit,
[tex]C = (t/ R) * (ln(1 - V1/V0))= (2/ 3.20 MΩ) * (ln (1 - 2/12))= 111.6 nF[/tex]
Therefore, the capacitance of the circuit is 111.6 nF.
b)The time constant of an RC circuit is given by the equation,τ = RC
Where R is the total resistance and C is the capacitance of the circuit. Thus, the time constant of the circuit is given by,
[tex]τ = RC= (3.20 MΩ) × (111.6 nF)= 0.356 s[/tex]
Therefore, the time constant of the circuit is 0.356 s.
To know more about capacitor visit:
https://brainly.com/question/31627158
#SPJ11
Two motorcycles are traveling due east with different velocities. However, 3.94 seconds later, they have the same velocity. During this 3.94− second interval, motorcycle A has an average acceleration of 2.36 m/s2 due east, while motorcycle B has an average acceleration of 18.2 m/s2 due east. (a) By how much did the speeds differ at the beginning of the 3.94-second interval, and (b) which motorcycle was moving faster?
To solve this problem, we can use the equations of motion. The speeds differ by -65.504 m/s (the negative sign indicates that motorcycle A is slower). Motorcycle A was moving faster than Motorcycle B at the beginning of the 3.94-second interval.
To solve this problem, we can use the equations of motion. Let's denote the initial velocities of the motorcycles as vA and vB, and their final velocities (after 3.94 seconds) as vfA and vfB.
(a) The difference in speeds at the beginning of the 3.94-second interval can be calculated using the equation:
vfA = vA + aA * t
vfB = vB + aB * t
Since the final velocities are the same, we have:
vfA = vfB
vA + aA * t = vB + aB * t
Solving for the difference in speeds (vB - vA):
vB - vA = aA * t - aB * t
Substituting the given values:
vB - vA = (2.36 m/s^2) * (3.94 s) - (18.2 m/s^2) * (3.94 s)
vB - vA = -65.504 m/s
Therefore, the speeds differ by -65.504 m/s (the negative sign indicates that motorcycle A is slower).
(b) To determine which motorcycle was moving faster, we compare their speeds at the beginning of the interval. If vB - vA is positive, motorcycle B was moving faster; if it is negative, motorcycle A was moving faster.
In this case, since vB - vA is negative (-65.504 m/s), it means that motorcycle A was moving faster than motorcycle B at the beginning of the 3.94-second interval.
To learn more about speeds click here
https://brainly.com/question/31756299
#SPJ11
The rotating dot illusion has a pink dot rotating in a circle. If you stare at the centre the dots forming the circle
look like they are vibrating
turn into one green dot
turn into a series of blue dots
turn into a yellow dot
disappear
The rotating dot illusion is a visual phenomenon where staring at a pink dot rotating in a circle can cause various perceptions, such as the dots appearing to vibrate, transforming into one green dot, a series of blue dots, a yellow dot, or even disappearing.
The rotating dot illusion is a result of the brain's interpretation of visual information and the persistence of vision. When we stare at the center of the rotating dot illusion, our visual system tries to make sense of the continuous motion and fill in the missing information. This can lead to various perceptual effects.
The perception of the dots vibrating can occur due to the contrast between the rotating pink dot and the stationary background. The rapid motion of the rotating dot and the fixated stare can create an illusion of movement in the surrounding dots, giving the impression of vibration.
The transformation of the dots into different colors, such as a green dot, a series of blue dots, or a yellow dot, is likely a result of afterimages and color adaptation. Staring at the rotating dot for an extended period can lead to temporary retinal fatigue and cause color receptors to become less responsive. When shifting attention to a blank area or a neutral background, the brain may perceive contrasting colors or an absence of color, resulting in the appearance of different colored dots or even the disappearance of the dots altogether.
Overall, the rotating dot illusion demonstrates how our visual system can be influenced by motion, color adaptation, and the brain's interpretation of incomplete visual information, leading to fascinating perceptual experiences.
Learn more about illusion here:
https://brainly.com/question/33371967
#SPJ11
A cougar jumps to a teight of 3.35 m when leaving the ground at an angle of 40.3p. What is its initat soeved (in myd) as it leaves the grsune? x Gilial velocity? How is this related to the int al speed? m/s
Therefore, the initial speed of the cougar is equal to the initial horizontal velocity and is approximately 5.77 m/s.
We can break down the initial velocity of the cougar into its horizontal and vertical components.
The vertical component of the initial velocity (V₀y) can be determined using the formula:
V₀y = V₀ * sin(θ)
The horizontal component of the initial velocity (V₀x) can be determined using the formula:
V₀x = V₀ * cos(θ)
Since the cougar jumps vertically, its initial vertical velocity is zero (V₀y = 0). Therefore, the vertical component of the initial velocity is zero.
To find the initial speed (V₀), we can use the relationship between the vertical displacement and the initial speed. The formula to calculate the vertical displacement for an object in projectile motion is given by:
h = (V₀² * sin²(θ)) / (2 * g),
where g is the acceleration due to gravity (approximately 9.8 m/s²).
Rearranging the equation, we can solve for V₀:
V₀ = sqrt((2 * g * h) / sin²(θ)).
Plugging in the given values:
h = 3.35 m
θ = 40.3°
g = 9.8 m/s²,
V₀ = sqrt((2 * 9.8 * 3.35) / sin²(40.3°))
≈ 7.58 m/s.
Therefore, the initial speed (V₀) of the cougar as it leaves the ground is approximately 7.58 m/s.
The horizontal component of the initial velocity (V₀x) can be found using:
V₀x = V₀ * cos(θ)
= 7.58 m/s * cos(40.3°)
≈ 5.77 m/s.
The initial horizontal velocity (V₀x) is approximately 5.77 m/s.
The initial speed (V₀) of the cougar is related to the initial horizontal velocity (V₀x) and the initial vertical velocity (V₀y) as follows:
V₀ = sqrt(V₀x² + V₀y²).
Since V₀y is zero, the initial speed (V₀) is equal to the initial horizontal velocity (V₀x).
Learn more about acceleration due to gravity: brainly.com/question/13860566
#SPJ11
a satellite is in orbit about earth. it's orbital radius is 2.79*10^7 m. the mass of the satellite is 1162 kg and the mass of the earth is 5.974*10^24 kg. determine the orbital speed of the satellite in mi/s. 1 mi/s = 1609 m/s
The orbital speed of the satellite is 12468.8 mi/s (approx)
We need to determine the orbital speed of the satellite in mi/s.
Given data:
The mass of the satellite, m1 = 1162 kg
The mass of the earth, m2 = 5.974 × 10²⁴ kg
Orbital radius of the satellite, r = 2.79 × 10⁷ m
Formula used: `v = sqrt(G × (m1 + m2) / r)`
Where,
v = Orbital speed of the satellite
sqrt
G = Universal gravitational constant
m1 = Mass of the satellite
m2 = Mass of the earth
r = Orbital radius of the satellite
Substituting the given values in the formula above, we get
[tex]v = \sqrt{(6.67 \times 10^{-11} \times (1162 + 5.974 \times 10^{24}) / 2.79 \times 10^7)v[/tex]
[tex]= \sqrt{(4.02712 \times 10^{14})v[/tex]
[tex]= 2.007 \times 10^7 m/s[/tex]
Converting m/s to mi/s, 1 mi/s = 1609 m/s
Therefore, the orbital speed of the satellite in mi/s is:
v = 2.007 × 10⁷ m/s ÷ 1609 m/s/v
= 12468.8 mi/s (approx)
Therefore, the orbital speed of the satellite is 12468.8 mi/s (approx).
To know more about speed, visit:
https://brainly.com/question/17661499
#SPJ11
. A vector
A
has a magnitude of 44.0 m and points in a direction 26.0
∘
below the positive x axis. A second vector,
B
, has a magnitude of 70.0 m and points in a direction 54.0
∘
above the positive x axis. Using the component method of vector addition, find the magnitude of the vector
C
=
A
+
B
. m
The magnitude of the vector C, denoted as |C|, can be found using the component method of vector addition.
In this method, we break down the vectors A and B into their x and y components, and then add the corresponding components to obtain the components of vector C. Finally, we calculate the magnitude of vector C using its components. To find the x and y components of vector A, we can use the given magnitude and direction. The x component of vector A, denoted as Ax, can be calculated using the cosine function:
Ax = |A| × cos(26.0°)
Similarly, the y component of vector A, denoted as Ay, can be calculated using the sine function:
Ay = |A| × sin(26.0°)
Likewise, for vector B, the x and y components can be calculated as follows:
Bx = |B| × cos(54.0°)
By = |B| × sin(54.0°)
Now, add the corresponding components of vectors A and B to obtain the components of vector C:
Cx = Ax + Bx
Cy = Ay + By
Finally, the magnitude of vector C, denoted as |C|, can be calculated using the Pythagorean theorem:
|C| = sqrt(Cx^2 + Cy^2)
By substituting the values of Cx and Cy into the equation, we can find the magnitude of vector C.
Learn more about vectors here: brainly.com/question/29708786
#SPJ11
Calculate the force of gravity between two 75 kg people sitting 0.5 m apart. 2.Calculate the force of gravity between one of those people and the Earth. Numbers of note:
⋅R
Earth
=6,378,000 m
⋅M
Earth
=5.97×10
24
kg
G=6.67×10
−11
Nm
2
/kg
2
The force of gravity between one of those people and the Earth is 735 N.
The force of gravity between two 75 kg people sitting 0.5 m apart is 2.95 x 10^-8 N.
The formula for the gravitational force is:
F = G(m1m2)/r^2
where
F = force of gravity
G = gravitational constant
m1 = mass of object 1
m2 = mass of object 2
r = distance between the centers of the masses
For two people with a mass of 75 kg and a distance of 0.5 m apart, m1 = m2 = 75 kg and r = 0.5 m.
Plugging these values into the formula:
F = G(m1m2)/r^2F = (6.67 x 10^-11 Nm^2/kg^2)(75 kg)(75 kg)/(0.5 m)^2F = 2.95 x 10^-8 N
To calculate the force of gravity between one of those people and the Earth, we can use the same formula. The mass of the Earth is given as 5.97 x 10^24 kg and the distance between the person and the center of the Earth can be assumed to be the radius of the Earth plus the person's height, or about 6.4 x 10^6 m.
Plugging these values into the formula:
F = G(m1m2)/r^2F = (6.67 x 10^-11 Nm^2/kg^2)(75 kg)(5.97 x 10^24 kg)/(6.4 x 10^6 m)^2F = 735 N (rounded to the nearest whole number)
Therefore, the force of gravity between one of those people and the Earth is 735 N.
To know more about gravity, visit:
https://brainly.com/question/31321801
#SPJ11
Point charges of 0.21μC and 0.48μC are placed 0.65 m apart. 450 Part (a) At what point along the line between them is the electric field zero? Give your answer in meters from the 0.21μ charge. x=0.259∨ Correct!
From 0.259 meters from the 0.21μC charge, the electric field between point charges will be zero.
To find the point along the line between the point charges where the electric field is zero, we can use the principle of superposition. The electric field due to each point charge can be calculated separately, and then added together.
Let's denote the distance from the 0.21μC charge to the point where the electric field is zero as x.
The electric field due to a point charge is given by the formula:
E = k * (q / r^2), where,
- E is the electric field
- k is the electrostatic constant (k = 8.99 x 10^9 Nm^2/C^2)
- q is the charge of the point charge
- r is the distance from the point charge to the location where the electric field is being measured
For the 0.21μC charge, the electric field at the point x is:
E1 = k * (0.21μC / x^2)
For the 0.48μC charge, the electric field at the point x is:
E2 = k * (0.48μC / (0.65 - x)^2)
Since the electric field is zero at the point x, we can set E1 + E2 = 0:
k * (0.21μC / x^2) + k * (0.48μC / (0.65 - x)^2) = 0
Now we can solve this equation to find the value of x.
By substituting the given value for k (8.99 x 10^9 Nm^2/C^2) and rearranging the equation, we can solve for x.
0.21μC / x^2 + 0.48μC / (0.65 - x)^2 = 0
Simplifying the equation, we get:
0.21 / x^2 + 0.48 / (0.65 - x)^2 = 0
Solving this equation gives us the value of x = 0.259 meters from the 0.21μC charge.
Learn more about principle of superposition: https://brainly.com/question/30396687
#SPJ11
Two large parallel metal plates are 1.04 cm apart and have charges of equal magnitude but opposite signs on their facing surfaces. Take the potential of the negative plate (located at the origin) to be zero, with the other plate located at x=1.04 cm. If the potential difference between the plates is 9.49 V, find the electric field between the plates. Enter a positive number if the field points along positive x and a negative number if the field points along negative x. mV
The electric field will point along negative x-axis is -912.5 mV/m.
As per data,
Two large parallel metal plates are 1.04 cm apart and have charges of equal magnitude but opposite signs on their facing surfaces.
Take the potential of the negative plate (located at the origin) to be zero, with the other plate located at x=1.04 cm. If the potential difference between the plates is 9.49 V, we need to find the electric field between the plates.
We can use the formula of electric field given by
E = V/d,
Where,
V is the potential difference and
d is the distance between the two plates.
Hence, substituting the given values of V and d, we get
E = 9.49 / 0.0104
E = 912.5 mV/m.
Since the plates are oppositely charged, the electric field between the plates will point from the positive plate to the negative plate.
Hence, the required electric field is -912.5 mV/m.
To learn more about electric field from the given link.
https://brainly.com/question/19878202
#SPJ11
In this problem, we will directly calculate the surface gravity and your weight on another planet. In metric, your weight is measured in "Newtons", and 1 Newton =1 kg m/s2. Newton's constant G=6.67x 10−11 m3/(kgs2). Earth has a mass =5.97×1024 kg and a radius of 6378 km. You should be able to verify that g=9.8 m/s2 on Earth using the formula for surface gravity. If your mass is 80 kg, you should also be able to verify you should weigh 783 Newtons. If you can do that you should be OK for what's next. The mass of Mercury is 3.28E+23 kg, and it's radius is 2.44E+3 km. What is the surface gravity of this planet? (Watch your units!). m/s2 If your mass is 80 kg, what would you weigh on Mercury? Newtons.
The surface gravity of the planet Mercury is 3.59 m/s², resulting in a weight of 287 Newtons for an object with a mass of 80 kg on Mercury.
The formula to calculate surface gravity is:
g = (G x M) / r²
Here,
G = 6.67x10⁻¹¹ m³ / (kg s²) is the gravitational constant
M = 3.28x10²³ kg is the mass of the planet
Mercury r = 2440 km + 6378 km = 8818 km = 8.818x10⁶ m (sum of radius of planet and radius of earth)
By substituting these values in the formula, we get:
g = (6.67x10⁻¹¹ m³ / (kg s²)) x (3.28x10²³ kg) / (8.818x10⁶ m)² = 3.59 m/s²
Weight on Mercury = mass x gravity = 80 kg x 3.59 m/s² = 287 N
Thus, the surface gravity of the planet Mercury is 3.59 m/s². If the mass of the object is 80 kg, then the weight on Mercury is 287 Newtons.
To know more about surface gravity, refer to the link below:
https://brainly.com/question/31408423#
#SPJ11
Current Attempt in Progress A block of wood floats in fresh water with 0.683 of its volume V submerged and in oil with 0.889 V submerged. Find the density of (a) the wood and (b) the oil.
(a) The density of the wood is approximately 0.317 times the density of fresh water.
(b) The density of the oil is approximately 0.111 times the density of fresh water.
(a) The density of the wood can be determined by using the principle of buoyancy. In fresh water, 0.683 of the wood's volume is submerged, which means the buoyant force is equal to the weight of the displaced water. Since the wood is floating, the buoyant force is equal to the weight of the wood. Therefore, the density of the wood can be calculated by dividing the weight of the wood by its submerged volume. The density of the wood is approximately 0.317 times the density of fresh water.
(b) Similarly, in oil, 0.889 of the wood's volume is submerged, and the buoyant force is equal to the weight of the displaced oil. Again, since the wood is floating, the buoyant force is equal to the weight of the wood. By dividing the weight of the wood by its submerged volume, the density of the wood can be determined. The density of the oil is approximately 0.111 times the density of fresh water.
Learn more about buoyancy here:
https://brainly.com/question/19168433
#SPJ11
A bicyclist is speeding up along a straight-line path. The rider throws a ball straight up to a height a few meters above her head. Ignoring air resistance, where will the ball land?
behind the rider
in front of the rider
in the same hand that threw the ball
in the opposite hand to the one that threw it
Resistance is the property of an object or substance that hinders or opposes the movement or flow of various factors, such as electrical current, heat, or fluids. It acts as an obstacle, limiting the smooth passage of these entities through a given medium. In the context of electrical systems, resistance plays a crucial role in impeding the flow of current and regulating the transmission and transformation of electrical energy within a circuit.
Resistance is significant because it directly impacts the behavior and efficiency of electrical components. For instance, wires, bulbs, or electric motors possess resistance, which curtails the unrestricted flow of current and causes energy dissipation in the form of heat. Understanding and managing resistance are essential in designing circuits and electrical systems to ensure optimal performance and avoid excessive energy loss.
Resistance can also manifest in physical movements, such as the motion of a bicyclist. When a bicyclist accelerates along a straight path and tosses a ball directly upward, disregarding the effects of air resistance, the ball will descend and land back in the hand that threw it. This occurs because, in the absence of air resistance, the only significant force acting on the ball is gravity. Despite the bicyclist's forward motion, the ball's upward momentum will eventually be overcome by the force of gravity, causing it to descend back into the bicyclist's hand.
resistance https://brainly.com/question/8581130
#SPJ11
(a) \( 3.10 \mathrm{~cm} \) magnitude direction --Select. (b) \( 20.0 \mathrm{~cm} \) magnitude /C direction (c) \( 200 \mathrm{~cm} \) magnitude N/C direction
[tex]\( 200 \mathrm{~cm} \) magnitude N/C direction[/tex] provides both the magnitude and direction, making it a complete answer.
(a) The given value of 3.10 cm is a magnitude, but it lacks a direction. In order to fully describe a physical quantity, both magnitude and direction must be specified. Therefore, the answer is incomplete.
(b) The given value of 20.0 cm magnitude / C represents the magnitude of a quantity, but it does not provide a clear understanding of its direction. The unit "C" is typically used to denote electrical charge, so it is unclear how it relates to the given magnitude. Without further clarification, the answer is incomplete.
(c) The given value of 200 cm magnitude N/C direction represents the magnitude of a quantity along with its direction. The unit "N/C" typically denotes electric field strength, which represents the force experienced by a charged object in an electric field.
In this case, the magnitude is 200 cm and the direction is N/C (north per coulomb).
This means that the electric field is directed towards the north and has a strength of 200 cm per coulomb.
In summary, only option (c) provides both the magnitude and direction, making it a complete answer.
Learn more about directions from the given link.
https://brainly.com/question/32262214
#SPJ11
H47. A string is wrapped around a pulley of radius \( r \), and a weight hangs from the other end. The weight descends with acceleration a . (A) What is the angular acceleration? (B) If the weight des
(A). The angular acceleration is approximately 118.52 rad/s².
(B). The angular velocity when the weight hits the floor is approximately 38.72 rad/s.
To find the angular acceleration (α), we need to relate it to the linear acceleration (a) using the equation α = a / r, where r is the radius of the pulley.
(A). As per data, the linear acceleration is a = 3.2 m/s² and the radius of the pulley is r = 2.7 cm = 0.027 m, we can plug these values into the equation to find the angular acceleration.
α = a / r
= 3.2 m/s² / 0.027 m
≈ 118.52 rad/s²
Therefore, it is estimated that the angular acceleration is 118.52 rad/s2.
(B). To find the angular velocity (ω) when the weight hits the floor, we can use the equation
ω² = ω₀² + 2αθ
Where, ω₀ is the initial angular velocity (which is 0 in this case), α is the angular acceleration, and θ is the angular displacement. The angular displacement (θ) can be calculated using the formula θ = s / r, where s is the distance the weight travels along the pulley.
As per data, the weight descends from rest from a height h = 1.4 m, the distance travelled along the pulley is equal to the circumference of the pulley, which is 2πr.
θ = 2πr / r
θ = 2π
Plugging the values into the equation
ω² = ω₀² + 2αθ, we get:
ω² = 0 + 2(118.52 rad/s²)(2π)
Simplifying the equation gives us:
ω² = 2(118.52 rad/s²)(2π)
ω² ≈ 1500.49 rad²/s²
Taking the square root of both sides gives us the angular velocity:
ω ≈ √1500.49 rad²/s²
≈ 38.72 rad/s
Therefore, the weight strikes the ground, the angular velocity is about 38.72 rad/s.
To learn more about angular acceleration from the given link.
https://brainly.com/question/13014974
#SPJ11
Complete question is,
H47. A string is wrapped around a pulley of radius r, and a weight hangs from the other end. The weight descends with acceleration a . (A) What is the angular acceleration? (B) If the weight descends from rest from height h, what is the angular velocity when the weight hits the floor? [Data 2.7 cm; a = 3.2 m/s^2; n = 1.4 m; also, the two masses are equal.] r= You are correct. Your receipt no. is Previous Tries Submit Answer Incorrect. Tries 6/12 Previous Tries
If charge q1=4 microcoulombs at (0,0 meters), q2=3 microcoulombs at (0,5) in meters, find the work done by you to move a third 16 microcoulomb charge from (3,5) to (8,0),K=9
∗
10
9
mks units. What is the potential difference between the inner and outer coaxial cylinders of inside radius 0.48 m, outside radius of 0.7 m, and length of 9m having a charge of 2 microcoulombs placed on the inner cylinder? (
ε
0=8.85×10
−12
mks units)
The work done to move the third charge can be calculated using the formula for electric potential energy.
The potential energy (U) is given by U = k * q1 * q3 / r, where k is the electrostatic constant (9 * 10^9 Nm^2/C^2), q1 and q3 are the charges, and r is the distance between the charges. We need to calculate the potential energy at both the initial and final positions of the charge and then find the difference.
The potential difference (V) is given by V = ΔU / q3, where ΔU is the difference in potential energy and q3 is the charge being moved. The potential difference is a measure of the work done to move the charge. To calculate the potential difference between the inner and outer coaxial cylinders, we need to determine the electric potential at each cylinder.
The electric potential (V) is given by V = k * Q / r, where Q is the charge on the cylinder and r is the radius. We can calculate the electric potential at both the inner and outer cylinders and then find the difference to determine the potential difference between them.
Learn more about electric potential energy click here: brainly.com/question/28444459
#SPJ11
It has been proposed that a spaceship might be propelled in the solar system by radiation pressure, using a iarge sail made of foil. How large must the surface area of the 5 all be if the radiation force is to be equal in magnitude to the Sun's gravitational attraction? Assume that the mass of the ship + sall is 1500 kg. that the sall is perfectly reflecting, and that the sail is oriented perpendicular to the 5 's 's rays. (With a larger sail, the ship is continuously driven away from the Sun.) The rate at which the 5un emits energy is 3.90×10
36W The Sun's mass is 1.99×10 30kg. Gravitational constant is 6.67×10 −11Nm 2/kg 2, Number Units
To determine the required surface area of the sail for a spaceship to be propelled by radiation pressure equal to the Sun's gravitational attraction, we need to compare the radiation force to the gravitational force.
Given the mass of the ship + sail, the rate at which the Sun emits energy, the Sun's mass, and the gravitational constant, we can calculate the surface area of the sail.
To calculate the required surface area of the sail, we need to equate the radiation force to the gravitational force. The radiation force is determined by the rate at which the Sun emits energy, while the gravitational force depends on the mass of the ship + sail, the mass of the Sun, and the distance between them.
By setting the radiation force equal to the gravitational force, we can rearrange the equation to solve for the surface area of the sail. The radiation force is proportional to the surface area, while the gravitational force is inversely proportional to the distance squared.
The concept of using radiation pressure from the Sun to propel a spaceship involves harnessing the momentum transfer from photons in sunlight.
By reflecting the sunlight off a large sail, the photons exert a force on the sail, propelling the spaceship.
To determine the required surface area of the sail, we set the radiation force equal to the gravitational force. The radiation force is determined by the rate at which the Sun emits energy, which is given.
The gravitational force is calculated using the mass of the ship + sail, the mass of the Sun, and the gravitational constant.
By equating these forces, we can rearrange the equation to solve for the surface area of the sail.
The resulting surface area represents the size of the sail required to balance the radiation pressure with the gravitational attraction from the Sun. With a larger sail, the spaceship is continuously driven away from the Sun, achieving propulsion in the solar system.
Learn more about Surface area from the given link:
https://brainly.com/question/29298005
#SPJ11
what is the difference between a cell and a battery
A cell is an electrochemical unit that can generate electricity, whereas a battery is a collection of cells that are interconnected and used to generate electric power.
What is a cell?
A cell is an electrochemical unit that can generate electrical energy via a redox reaction. The reaction can be reversed by supplying an electrical current, which regenerates the cell's reactants.
A cell typically has two electrodes made of different materials, one of which is the anode and the other is the cathode. The electrolyte is the liquid or solid material that connects the electrodes and carries the charge between them.
A cell's voltage depends on the nature of the electrode and electrolyte materials employed.
What is a battery?
A battery is a collection of two or more cells that are connected together. The cells in the battery can generate more energy when combined than each individual cell.
Multiple cells are connected to provide a higher voltage to the circuit, which is required for running various electrical devices. Thus, a battery comprises a group of cells that are electrically connected and housed in a container.
So, the battery is a combination of two or more cells that are electrically connected in a series or parallel.
To learn more about cell and battery from the given link.
https://brainly.com/question/31649757
#SPJ11
A 1400 kg car traveling north at 9 m/s collides with a 1800 kg truck moving at 13 m/s east. If the two vehicles remain locked together after impact, find the speed (magnitude only) Your Answer:
The magnitude of the velocity of the two vehicles after the collision is approximately 11.25 m/s.The magnitude of the speed after the collision of the two vehicles can be found by using the law of conservation of momentum.
The law of conservation of momentum states that the total momentum before a collision is equal to the total momentum after the collision.
Thus, we can write:Initial momentum = Final momentum.
Before the collision, the car has a momentum of (1400 kg) × (9 m/s) = 12600 kg·m/s in the north direction, and the truck has a momentum of (1800 kg) × (13 m/s) = 23400 kg·m/s in the east direction.
Since the two vehicles remain locked together after the collision, their momentum will add up to give the momentum of the combined system.
Thus, we have: Final momentum = (1400 kg + 1800 kg) × v where v is the magnitude of the velocity of the two vehicles after the collision (since they are now moving together as one object).
Setting the initial momentum equal to the final momentum and solving for v, we get:12600 kg·m/s + 23400 kg·m/s = (1400 kg + 1800 kg) × v36000 kg·m/s = 3200 kg × vv = (36000 kg·m/s) ÷ (3200 kg) ≈ 11.25 m/s
Therefore, the magnitude of the velocity of the two vehicles after the collision is approximately 11.25 m/s.
Learn more about collision here ;
https://brainly.com/question/4322828
#SPJ11
Please show work. Thank you! A roller-coaster car of mass \( 1.60 \times 10^{3} \mathrm{~kg} \) is initially at the top of a rise at point (A). It then moves \( 35.3 \mathrm{~m} \) at an angle of \( 55.0^{\circ} \) below the hori
The work done by the roller-coaster car is \( \text{Work} = - \mu_{\text{rolling}} \cdot m \cdot g \cdot d \cdot \cos(\theta) \) where \( \mu_{\text{rolling}} \) is the coefficient of rolling friction, \( m \) is the mass of the car, \( g \) is the acceleration due to gravity, \( d \) is the distance traveled, and \( \theta \) is the angle of the incline.
In this case, since the car is initially at the top of a rise and moves downwards, the work done is negative. The negative sign indicates that work is done against the motion of the car.
To calculate the work done, we need the coefficient of rolling friction (\( \mu_{\text{rolling}} \)) between the car and the track. The value of \( \mu_{\text{rolling}} \) depends on the specific surfaces in contact. Without this information, it is not possible to provide an accurate calculation of the work done.
To find the work done, you would need to know the value of [tex]\( \mu_{\text{rolling}} \)[/tex]and plug in the given values into the formula above. The mass of the car (\( m \)), the distance traveled (\( d \)), and the angle of the incline[tex](\( \theta \)) are provided in the question. Once you have the value of \( \mu_{\text{rolling}} \), you can calculate the work done.[/tex]
Learn more about work done from the given link https://brainly.com/question/32263955
#SPJ11.
Projectile Motion: A ball is thrown horizontally from the edge of a 122.5 m cliff. Its initial horizontal velocity is 49 m/s. a. Find the x and y component of the velocity 2 s later. Also find the magnitude and direction of the velocity at that instant. b. How long is the ball in the air? 7. Addition of Velocities: A blimp cruising with a constant air speed of 150 km/h heads due north against a steady 75 km/h wind blowing toward southeast (or 45 degrees below the positive x-axis). a. Compute its ground speed (resultant) and its actual direction of travel. The resultant vector is shown by R. b. The distance traveled in after 3.25 hours of cruising.
the distance traveled is 545.89 km.
a) Horizontal velocity component = 49 m/s (unchanged)
Vertical velocity component at time t = 2s can be calculated as follows: From the given information, initial vertical velocity, u = 0 (since the ball is thrown horizontally)
Acceleration due to gravity, a = 9.8 m/s^2Time, t = 2sUsing the equation, s = ut + 0.5at^2, where s = vertical displacement
By substituting the given values, we can find the vertical velocity component, v = u + at, v = 0 + 9.8 × 2v = 19.6 m/s. Velocity at that instant can be found using the Pythagorean theorem:
v² = horizontal velocity component² + vertical velocity component²v² = 49² + 19.6²v² = 2539.16 magnitute of velocity = √2539.16. magnitute of velocity = 50.39 m/s.
The angle the velocity makes with the horizontal can be found using the inverse tangent function:θ = tan-1(vertical velocity component/horizontal velocity component)θ = tan-1(19.6/49)θ = 22.9° above the horizontal, or 67.1° below the horizontal.
b) We can use the formula, t = 2u/a to find the time the ball is in the air. Using the given values, t = 2u/a = 2 × 49/9.8 = 10 s. Hence, the ball is in the air for 10 s.7.
a) The ground speed of the blimp is given by the magnitude of the resultant vector R, which is given by the Pythagorean theorem:R² = (air speed)² + (wind speed)²R² = 150² + 75²R² = 22,500 + 5625R² = 28,125R = √28,125R = 167.83 km/h.
The direction of the velocity can be found using the inverse tangent function:
θ = tan-1(opposite/adjacent)θ = tan-1(75/150)θ = 26.6° north of east
b) We can use the formula, distance = speed × time, to find the distance traveled in 3.25 hours. distance = speed × time = 167.83 × 3.25distance = 545.89 km.
Hence, the distance traveled is 545.89 km.
learn more about magnitude
https://brainly.com/question/30337362
#SPJ11
A 1,186-kg car accelerates from v
o
=18 m/s to v=41 m/s over a distance of x =373 m. What is the magnitude of the average net force acting on the car? Please round your answer to the nearest integer (whole number). Equations: F=ma and x=
2a
v
2
−v
o
2
The magnitude of the average net force acting on the car is approximately 3,764 N. To find the magnitude of the average net force acting on the car, we can use Newton's second law.
To find the magnitude of the average net force acting on the car, we can use the equation:
F = ma
where F is the net force, m is the mass of the car, and a is the acceleration.
First, we need to calculate the acceleration of the car using the equation:
a = (v^2 - v_o^2) / (2x)
where v is the final velocity, v_o is the initial velocity, and x is the distance.
Substituting the given values:
v = 41 m/s
v_o = 18 m/s
x = 373 m
a = (41^2 - 18^2) / (2 * 373)
a ≈ 3.18 m/s^2
Now, we can calculate the net force using the equation:
F = ma
F = 1,186 kg * 3.18 m/s^2
F ≈ 3,764 N
Therefore, the magnitude of the average net force acting on the car is approximately 3,764 N.
To learn more about Newton's second law click here
https://brainly.com/question/27712854
#SPJ11
A car of mass m is travelling on an incline at speed v0 when the driver sees something in the road ahead and slams on the brakes. The angle of the incline is θ with respect to level ground. The car skids and eventually comes to a halt some distance d farther along the hill. The coefficient of kinetic friction between the road and the tires is μk. Assume that the acceleration a is constant during the entire incident.
Given three different hill conditions, find the stopping time t and the stopping distance (change of x).
In all cases, take m = 1.50 tonne (metric ton), vi = 30.0 m/s and μk = 0.800
a) uphill: theta = 10°
b) level ground: theta = 0°
c) downhill: theta = − 10° or 350° wrt +x axis
. In the case of level ground, we have found that the stopping time t is 4.82 s and the stopping distance (change of x) is 144.6 m.
A mass m car travels on an incline at speed v0 when the driver sees something in the road ahead and slams on the brakes. The angle of the incline is θ to level ground. The coefficient of kinetic friction between the road and the tires is μk. Assume that the acceleration a is constant during the entire incident.
Given three different hill conditions, we must find the stopping time t and distance (change of x).In all cases, take m = 1.50 tonne (metric ton), vi = 30.0 m/s, and μk = 0.800
a) uphill: θ = 10° The force that acts upon the car is given by F = mgsinθ - μkmgcosθ. Using this value of force, we can obtain acceleration and hence the distance and time required to bring the car to a halt as shown below:
ma = mgsinθ - μkmgcosθa
= g (sinθ - μkcosθ)a
= 9.8 (sin10 - 0.8 cos10)a
= 1.08 m/s² (approximately)
The initial velocity of the car vi = 30 m/s, the final velocity of the car vf = 0 m/s, and the acceleration of the car a = 1.08 m/s².
Substituting these values in the kinematic equation of motion for the velocity we get:
vf = vi + at0
= (vf - vi)/a0
= (0 - 30)/1.08
= -27.8 s (we take the absolute value)
Stopping Distance:
We know that the distance (d) covered by the car during the time of the motion is given by:
d = vit + 0.5 at²
d = 30t + 0.5 × 1.08 × t²
On putting t = 27.8 s, we get
d = 30 × 27.8 - 0.5 × 1.08 × (27.8)²
d = 368.6 m
Stopping Time:
The stopping time for the car is equal to the time taken by the car to travel a distance of d, i.e.,
t = d/v0
t = 368.6/30
t = 12.29 s
The given three different hill conditions are - uphill, level ground, and downhill. In the uphill case, we have found that the stopping time t is 12.29 s and the stopping distance (change of x) is 368.6 m. In the case of level ground, we have found that the stopping time t is 4.82 s and the stopping distance (change of x) is 144.6 m.
To know more about the coefficient of kinetic friction, visit:
brainly.com/question/19392943
#SPJ11
A ball is projected horizontally from the edge of a table that is 1.17 m high, and it strikes the floor at a point 1.33 m from the base of the table. What is the initial speed of the ball?
2.72 m/s
How high is the ball above the floor when its velocity vector makes a 45.5o angle with the horizontal?
The final speed of the car after accelerating at 1.9 m/s² for 27 seconds is: final velocity = 60.3 m/s and the final speed of the car can be calculated using the initial velocity, acceleration, and time given.
The final speed of the car can be calculated using the initial velocity, acceleration, and time given. Using the formula for calculating final velocity with constant acceleration:
final velocity = initial velocity + (acceleration * time)
Given:
Initial velocity (u) = 9 m/s
Acceleration (a) = 1.9 m/s²
Time (t) = 27 seconds
Plugging in the values into the formula:
final velocity = 9 m/s + (1.9 m/s² * 27 s)
Calculating the expression:
final velocity = 9 m/s + 51.3 m/s
Therefore, the final speed of the car after accelerating at 1.9 m/s² for 27 seconds is: final velocity = 60.3 m/s
To know more about velocity visit:
https://brainly.com/question/80295
#SPJ11
