A point charge q2 = -4.8 μC is fixed at the origin of a co-ordinate system as shown. Another point charge q1 = 1.4 μC is is initially located at point P, a distance d1 = 7.4 cm from the origin along the x-axis

student submitted image, transcription available below

1. The charge q2 is now replaced by two charges q3 and q4 which each have a magnitude of -2.4 μC, half of that of q2. The charges are located a distance a = 1.8 cm from the origin along the y-axis as shown. What is ΔPE, the change in potential energy now if charge q1 is moved from point P to point R?

student submitted image, transcription available below

2. What is the potential energy of the system composed of the three charges q1, q3, and q4, when q1 is at point R? Define the potential energy to be zero at infinity.

Answers

Answer 1

The potential energy of the system composed of the three charges q1, q3, and q4, when q1 is at point R, is 3.18 × 10⁻⁵ J.

1. Potential energy of the charge q1 at point P:

Initially, the potential energy of charge q1 at point P when q2 is present is given as:

PE = (1/4πε) (q1q2)/d1

where ε is the electric permittivity of the medium (air)PE = (1/4πε) (1.4 × 10⁻⁶ C × (-4.8 × 10⁻⁶ C))/0.074 m= -2.24 × 10⁻⁵ J

Now, the new potential energy of the charge q1 at point R when q3 and q4 are present and q2 is absent is:

PE' = (1/4πε) ((q1q3)/(d1r1) + (q1q4)/(d1r2))

Where r1 and r2 are the distances between charges q1 and q3 and charges q1 and q4 respectively.

The distance between the charge q1 and charge q3,r1 = [d₁² + (a/2)²]^(1/2) = [0.074² + 0.018²]^(1/2) = 0.0778 m

The distance between the charge q1 and charge q4,r2 = [d₁² + (a/2)²]^(1/2) = [0.074² + 0.018²]^(1/2) = 0.0778 m

Therefore, PE' = (1/4πε) ((1.4 × 10⁻⁶ C × (-2.4 × 10⁻⁶ C))/(0.074 × 0.0778))= -2.308 × 10⁻⁵ J

Difference in potential energy,ΔPE = PE' - PE = -2.308 × 10⁻⁵ J - (-2.24 × 10⁻⁵ J) = -6.8 × 10⁻⁷ J2. Potential energy of the system at point R:

Initially, we can find the potential energy of the system by considering all three charges as a triplet of point charges placed in the system.

The potential energy of this triplet is given by the expression:PE = (1/4πε) [(q1q2)/r₁₂ + (q1q3)/r₁₃ + (q2q3)/r₂₃]

Where, r₁₂, r₁₃, and r₂₃ are the distances between charges q1 and q2, q1 and q3, and q2 and q3 respectively.

r₁₂ = [d₁² + 0²]^(1/2) = d₁ = 0.074 mr₁₃ = [(a/2)² + (d₁)²]^(1/2) = 0.0772 m r₂₃ = [(a/2)² + (a/2)²]^(1/2) = 0.0254 m

Substituting the values, we get:

PE = (1/4πε) [(1.4 × 10⁻⁶ C × (-4.8 × 10⁻⁶ C))/(0.074 m) + (1.4 × 10⁻⁶ C × (-2.4 × 10⁻⁶ C))/(0.0772 m) + (-4.8 × 10⁻⁶ C × (-2.4 × 10⁻⁶ C))/(0.0254 m)] = -3.18 × 10⁻⁵ J

Now, the potential energy of the system at point R can be given as: PE' = (1/4πε) ((q1q3)/(r₃) + (q3q4)/(r₄))

Since potential energy is zero at infinity, potential energy at R is the potential energy of the system.

Hence, PE' = -PE= -(-3.18 × 10⁻⁵ J) = 3.18 × 10⁻⁵ J

Therefore, the potential energy of the system composed of the three charges q1, q3, and q4, when q1 is at point R, is 3.18 × 10⁻⁵ J.

Learn more about potential energy with the given link,

https://brainly.com/question/21175118

#SPJ11


Related Questions

The equation w = (3t² + 6) defines the angular velocity of a 1.6m-diameter circular disk, where t is in seconds. Determine the velocity and acceleration of a point on the rim of the circular disk when t is equal to 0.5 s.

Answers

At t = 0.5 s, the velocity of a point on the rim of the circular disk is approximately 2.4 m/s, while the acceleration is approximately 2.4 m/s².

To determine the velocity and acceleration of a point on the rim of the circular disk when t = 0.5 s, we can differentiate the equation w = (3t² + 6) with respect to time (t).

Given that the diameter of the disk is 1.6 m, the radius (r) can be calculated as half of the diameter: r = 1.6 m / 2 = 0.8 m.

Differentiating w with respect to t:

dw/dt = d(3t² + 6)/dt

dw/dt = 6t

The angular velocity (w) is the rate of change of the angular displacement with respect to time. Since the equation w = 6t represents the angular velocity, we can substitute t = 0.5 s into this equation to find the angular velocity at t = 0.5 s:

w = 6t

w = 6(0.5)

w = 3 rad/s

The linear velocity (v) of a point on the rim of the circular disk can be calculated using the formula v = rw, where r is the radius and w is the angular velocity. Substituting the values:

v = 0.8 m × 3 rad/s

v = 2.4 m/s

Therefore, when t = 0.5 s, the velocity of a point on the rim of the circular disk is 2.4 m/s.

To find the acceleration (a), we need to differentiate the linear velocity (v) with respect to time (t):

a = dv/dt

Differentiating v = rw with respect to t:

a = d(rw)/dt

a = r(dw/dt)

Substituting the values:

a = 0.8 m × (6t)

a = 4.8t m/s²

When t = 0.5 s, the acceleration of a point on the rim of the circular disk is:

a = 4.8 × 0.5

a = 2.4 m/s²

Learn more about angular velocity here:

https://brainly.com/question/32217742

#SPJ11








b) What is the length of the SLAC accelerator as measured in the reference frame of the electrons?

Answers

The length of the SLAC accelerator as measured in the reference frame of the electrons is 3,2 km. Here's an explanation of the SLAC accelerator and its length.

The SLAC accelerator is a linear particle accelerator located in Menlo Park, California. It was created in 1962 by the Stanford Linear Accelerator Center (SLAC), which is now known as the SLAC National Accelerator Laboratory. The SLAC accelerator is a 3.2 km-long linear accelerator that uses microwaves to accelerate electrons to extremely high speeds.

The length of the SLAC accelerator as measured in the reference frame of the electrons is 3,2 km because the electrons are moving very quickly relative to the laboratory reference frame, causing them to contract in length. This phenomenon is known as length contraction and is a consequence of Einstein's theory of special relativity.

To know more about  length visit:-

https://brainly.com/question/32060888

#SPJ11

High-voltage power lines are a familiar sight throughout the country. The aluminum (resistivity \( =2.82 \times 10^{-8} \Omega \mathrm{m} \) ) wire used for some of these lines has a cross-sectional a

Answers

The electrical resistance of a 1 km long power line made of aluminum (resistivity=2.82×10⁻⁸ Ωm) with a cross-sectional area of 4.50×10⁻⁴ m² is 0.222 Ω.

For an aluminum wire, resistivity (ρ) = 2.82 × 10⁻⁸ Ωm, cross-sectional area (A) = 4.50 × 10⁻⁴ m², and length (l) = 1 km = 1000 m.

The formula for calculating the electrical resistance of a wire is given by R = ρ(l/A).

Substituting the given values in the above formula, we get R = 2.82 × 10⁻⁸ × (1000/4.50 × 10⁻⁴) = 0.222 Ω.

Hence, the electrical resistance of a 1 km long power line made of aluminum with a cross-sectional area of 4.50 × 10⁻⁴ m² is 0.222 Ω.

Learn more about resistivity here:

https://brainly.com/question/29427458

#SPJ11

A man weighs 640 N while on the surface of Earth. If he is transported to the planet X, which has the same mass as Earth but a radius that is eight times larger than Earth's, his weight would be 80 N. 120 N. 10 N. 3,200 N 15,000 N

Answers

The weight of an object is determined by the gravitational force acting on it. If the man is transported to the planet X, his weight would be 80 N.

The weight of an object is determined by the gravitational force acting on it. The formula to calculate weight is W = mg, where W is the weight, m is the mass, and g is the acceleration due to gravity. On the surface of Earth, man's weight is 640 N. Since the mass of man remains the same, the change in weight is due to the change in gravitational acceleration on planet X.

The gravitational acceleration on planet X can be determined using the formula for the acceleration due to gravity: g' = (GM)/(r'^2), where G is the gravitational constant, M is the mass of the planet, and r' is the radius of the planet. Since planet X has the same mass as Earth but a radius that is eight times larger, the gravitational acceleration on planet X is (1/64) times the gravitational acceleration on Earth.

Therefore, the weight of the man on planet X is (1/64) times his weight on Earth, which is 80 N.

To learn more about gravitational force click here

https://brainly.com/question/29190673

#SPJ11




Define critical angle. Express the condition for the critical angle to exist (in terms of refractive index of the incident and transmitted media).

Answers

Critical angle is the minimum angle of incidence at which total internal reflection occurs. It happens when the angle of incidence in an optically dense medium is more than the angle of refraction in an optically less dense medium.

When a ray of light moves from a denser medium to a rarer medium, it bends away from the normal. If the angle of incidence is increased continuously, at one point, the angle of refraction will become 90°. This is called the critical angle.

Explanation:

The formula for critical angle is sin c = n2 / n1,

where

c is the critical angle,

n1 is the refractive index of the denser medium,

and n2 is the refractive index of the rarer medium.

The condition for the critical angle to exist is that the angle of incidence must be greater than the critical angle. If the angle of incidence is equal to or less than the critical angle, then the light will refract into the rarer medium.

If the angle of incidence is greater than the critical angle, then total internal reflection will occur.

In summary, critical angle is the minimum angle of incidence at which total internal reflection occurs. The condition for the critical angle to exist is that the angle of incidence must be greater than the critical angle, which is calculated using the formula sin c = n2 / n1, where c is the critical angle, n1 is the refractive index of the denser medium, and n2 is the refractive index of the rarer medium.

To know more about angle of incidence visit:

https://brainly.com/question/14221826

#SPJ11

step by step explaination please Two blocks are attached by light wires in the configuration shown in the figure below. The block B of mass \( 70.0 \mathrm{~kg} \) rests on a wedge platform fixed to the floor, and the static coeffici

Answers

The maximum mass of block A for which block B will remain at rest is approximately 15.18 kg.

To find the maximum mass of block A for which block B will remain at rest, we need to consider the forces acting on both blocks.

1. First, let's consider block B on the wedge platform.

The weight of block B is given by the equation:

Weight of B = mass of B × acceleration due to gravity

Weight of B = 70.0 kg × 9.8 m/s²

                   = 686 N

2. The normal force acting on block B can be calculated using the equation:

Normal force on B = Weight of B × cos(30°)

Normal force on B = 686 N × cos(30°)

                              ≈ 594.55 N

3. The static friction force acts between block B and the wedge surface. The maximum static friction force can be calculated using the equation: Maximum static friction force = Static coefficient of friction × Normal force on B

Maximum static friction force = 0.24 × 594.55 N

                                                ≈ 142.69 N

4. Now, let's consider the forces acting on block A. The weight of block A is given by:

Weight of A = mass of A × acceleration due to gravity

Weight of A = mass of A × 9.8 m/s²

5. To keep block B at rest, the maximum static friction force must be equal to or greater than the horizontal component of the weight of block A.

The horizontal component of the weight of A is given by:

Horizontal component of Weight of A = Weight of A × sin(60°)

Horizontal component of Weight of A = (mass of A × 9.8 m/s²) × sin(60°)

6. Setting the maximum static friction force equal to the horizontal component of the weight of A, we have:

Maximum static friction force = Horizontal component of Weight of A 142.69 N

Maximum static friction force = (mass of A × 9.8 m/s²) × sin(60°)

7. Solving for the mass of A, we get:

mass of A = (142.69 N) / (9.8 m/s² × sin(60°))

mass of A ≈ 15.18 kg

Therefore, the block B will remain at rest until a maximum mass of block A of about 15.18 kg.

To learn more about static friction force from the given link.

https://brainly.com/question/13680415

#SPJ11

Complete question is,

Two blocks are attached by light wires in the configuration shown in the figure below. The block B of mass 70.0 kg rests on a wedge platform fixed to the floor, and the static coefficient of friction between the block and the wedge surface is 0.24. Find the maximum mass of block A for which the block B will remain at rest. Wall 1 60° B 30° A Wedge fixed to floor

In a straight part of a stream, flowing.water moves fastest a)water moves at the same speed in all areas of a stream b)along the bottom of the stream c) near the banks of the stream d)in the center of the stream, away from the bottom and the banks

Answers

In a straight part of a stream, the water moves fastest d) in the center of the stream, away from the bottom and the banks.

This is due to the principle of laminar flow, where water molecules in the center experience less friction compared to those near the bottom or the banks. The flow of water in a stream is influenced by factors such as gravity, channel shape, and friction. As the stream flows, the water near the bottom and the banks experiences more frictional resistance, causing it to slow down. In contrast, the water in the center of the stream has less interaction with the stream's boundaries, allowing it to move more quickly. This creates a faster flow in the center of the stream compared to the other areas.

To know more about laminar flow

brainly.com/question/23008935

#SPJ11

The magnetic domains in a non-magnetized piece of iron are characterized by which orientation? They are oriented randomly. Adjacent domains are oriented perpendicular to each other. Adjacent domains are aligned anti-parallel to each other. They are all aligned parallel to each other. Adjacent domains are aligned at 45∘
with respect to each other.

Answers

The magnetic domains in a non-magnetized piece of iron are oriented randomly.

In a non-magnetized piece of iron, the magnetic domains are not aligned in any specific direction. The magnetic domains consist of small regions within the iron where the atomic magnetic moments are aligned. However, the orientations of these domains are random, resulting in a net magnetic field of zero. When an external magnetic field is applied to the iron, these domains start to align in the direction of the external field, leading to magnetization of the material. So, in their initial state, the magnetic domains in non-magnetized iron are randomly oriented, lacking any specific alignment or orientation.

To learn more about magnetic domains:

https://brainly.com/question/31728739

#SPJ11

A spring , with constant k=890 N/m, launches a toboggen at the top of a hill 9.5m high. The mass of the toboggen and rider is 80 kg. If the rider manages to compress the spring 2.6m (neglect friction) what is the speed at the bottom of the hill?

Answers

The speed of the toboggan at the bottom of the hill is 13.86 m/s.

The potential energy stored in a spring can be calculated using the formula PE_spring = (1/2)kx², where k represents the spring constant and x represents the displacement from the equilibrium position.

As per the problem, the spring has a constant k = 890 N/m, and is compressed 2.6 m. Therefore, the spring potential energy stored in the spring is given by:

PE_spring = (1/2)(890 N/m)(2.6 m)² = 3087.8 J

At the top of the hill, the toboggan and rider are at rest. Therefore, the total energy of the toboggan and rider system is equal to the potential energy of the spring:

E_total = PE_spring = 3087.8 J

When the toboggan reaches the bottom of the hill, all of the potential energy is converted to kinetic energy. Therefore, we can use the principle of conservation of energy to find the speed of the toboggan at the bottom of the hill:

E_total = KE_bottom

mgh = (1/2)mv²v = √(2gh) = √(2(9.81 m/s²)(9.5 m)) = 13.86 m/s

Therefore, the speed of the toboggan at the bottom of the hill is 13.86 m/s.

Learn more about speed at:

#SPJ11

Torricelli’s law says that for a tall column of liquid in a container with a small hole at the bottom, the water will flow out of the hole with a velocity v= √2 gh. In lab, students measure v, the velocity of the water, and h, the height of the liquid column. If they graph v vs. √h, the graph will be linear with a slope ¿ √2 gand an intercept of zero. 1. Use the following data table to plot a linear graph and use the slope to calculate an experimental value for g. Determine the percent error using gtheor = 9.81 m/s2. Data Table 1: The table shows the height, h, measured from the small hole to the top of the water column, and the measured speed, v, of the water flowing out of the small hole near the bottom of the column. Height, h ± 1 (cm) Speed v ±0.2 (m/s) 100 4.2 120 5.0 140 5.2 160 5.6 180 6.0 200 6.4 220 6.8 240 7.0 Slope: _______________________ g experimental: ____________________ Percent error______________

Answers

the percent error is 226.90%

The graph between velocity (v) and √h is linear with a slope of √2g and an intercept of zero for Torricelli’s law. Here is how to calculate the slope of the linear graph and the experimental value for g using the data table provided:

Data Table:Height, h ± 1 (cm)Speed v ±0.2 (m/s)1004.21205.01405.21605.61806.02006.42206.82407.0Plot the graph with velocity (v) on the y-axis and the square root of height (√h) on the x-axis. Calculate the slope of the linear graph using the formula:

slope = Δv/Δ(√h)Where Δv is the change in velocity and Δ(√h) is the change in the square root of height. To calculate Δv and Δ(√h), use the following formulae:Δv = v2 - v1Δ(√h) = (√h2 - √h1)

Slope: Using the data table, let's calculate the values of Δv and Δ(√h) for the first two rows:Δv = v2 - v1= 5.0 - 4.2= 0.8Δ(√h) = (√h2 - √h1)= (√120 - √100)= 2.9154759 - 2.8284271= 0.0870488

Now calculate the slope:slope = Δv/Δ(√h)= 0.8/0.0870488= 9.1932936 g experimental: Now use the slope to calculate an experimental value for g:√2g = slopeg = (slope/√2)²= (9.1932936/√2)²= 32.0862589 m/s²Percent error: The experimental value for g is 32.0862589 m/s², while gtheor is 9.81 m/s². T

he percent error is calculated as follows:percent error = (|gtheor - gexperimental|/gtheor) × 100%= (|9.81 - 32.0862589|/9.81) × 100%= 226.90%Therefore, the percent error is 226.90%. .

learn more about velocity

https://brainly.com/question/80295

#SPJ11

A conical pendulum is a weight or bob fixed on the end of a string suspended from a pivot. It moves in a horizontal circular path, as shown in the diagram below. (a) What is the tension in the string? (Use the following as necessary: m,g, and θ. ) T= (b) What is the centripetal acceleration of the bob? (Use the following as necessary: g
r

and θ. ) a
c

= m/s
2
(d) What is the radius, in meters, of the horizontal circular path? m (e) What is the speed of the mass, in m/s ? m/s

Answers

In a conical pendulum: (a) The tension in the string is given by T = mg / cosθ, (b) The centripetal acceleration is ac = g tanθ, (d) The radius of the circular path is r = L sinθ, and (e) The speed of the mass is v = √(rgtanθ).

A conical pendulum is a weight or bob fixed on the end of a string suspended from a pivot. It moves in a horizontal circular path, as shown in the diagram below. (a) What is the tension in the string? (Use the following as necessary: m,g, and θ. ) T=mg / cos θ. (b) What is the centripetal acceleration of the bob? (Use the following as necessary: g, r, and θ. ) a  c ​ = g tan θ. (d) What is the radius, in meters, of the horizontal circular path? r = L sinθ. (e) What is the speed of the mass, in m/s? v = √(rgtanθ). The tension in the string, T can be given by the formula, T = mg / cosθ, Where m is the mass, g is the acceleration due to gravity, and θ is the angle between the string and the vertical axis.The centripetal acceleration of the bob can be given by the formula, ac = g tanθ, Where g is the acceleration due to gravity, and θ is the angle between the string and the vertical axis. The radius, r of the horizontal circular path can be given by the formula, r = L sinθ, Where L is the length of the string, and θ is the angle between the string and the vertical axis.The speed of the mass, v can be given by the formula, v = √(rgtanθ), Where r is the radius, g is the acceleration due to gravity, and θ is the angle between the string and the vertical axis.

For more questions on centripetal acceleration

https://brainly.com/question/79801

#SPJ8

There are 7 books in a stack, each with a weight of 5 N. The coefficient of static friction between all the books is 0.19. With what horizontal force, in newtons, must I push to start sliding the top six books off the bottom one?

Answers

To solve the problem, first let's find the weight of all seven books. The weight of a single book is 5 N, therefore the weight of all seven books is:5 N x 7 = 35 N Let's now calculate the maximum static frictional force that must be overcome to get the top six books sliding off the bottom one. The coefficient of static friction between the books is 0.19.

The formula for calculating the force of friction is:F = μN where F is the force of friction, μ is the coefficient of friction, and N is the normal force acting perpendicular to the surface between the two objects.So, the maximum force of static friction between the books can be calculated as:F = 0.19 x 35 N = 6.65 N Now, to start sliding the top six books off the bottom one, a force greater than 6.65 N must be applied horizontally.

Therefore, the minimum horizontal force that must be applied to get the top six books sliding is:6.65 N x 2 = 13.3 N (since the force will need to overcome the static friction between the bottom book and the ground and between the bottom book and the second book)Therefore, the horizontal force needed to start sliding the top six books off the bottom one is 13.3 N.

To know more about frictional visit:-

https://brainly.com/question/13000653

#SPJ11

Two people are trying to move a piece of heavy furniture that weighs 38 kg. One pushes from the back with a force of 198 N and the other pulls from front with force of 339 N, but the furniture still doesn't move. Given that the coefficient of static friction μs​ between the furniture and the ground is 0.4, what is the magnitude of the force of static friction (in Newtons) that the ground exerts on the furniture in this situation? Retain 3 significant figures to your answer.

Answers

The magnitude of force of static friction in the given situation is 364N approximately.

Given information: The mass of the furniture, m = 38 kg, the force applied from back, F1 = 198 N, the force applied from front, F2 = 339 N and the coefficient of static friction, μs​ = 0.4.We know that the magnitude of force of static friction (fs) is given by: fs = μs​ × N, where N is the normal force acting on the furniture.

Let's find the normal force acting on the furniture using the free-body diagram. We have two forces acting on the furniture as below: We know that, The force applied on the furniture from the back, F1 = 198 N. The force applied on the furniture from the front, F2 = 339 N. The force of gravity acting on the furniture, Fg = mg, where m = 38 kg (given) and g = 9.8 m/s²Fg = 372.4 N (approx)The furniture is at rest and hence the net force acting on the furniture is zero. Therefore, Fnet = F1 + F2 + Fg + N = 0We need to find N, the normal force acting on the furniture:N = - F1 - F2 - Fg = -198 N - 339 N - 372.4 N = - 909.4 N (approx)Since the normal force can only be positive, we take the absolute value of N, which is,N = 909.4 N (approx)Hence, the magnitude of the force of static friction (fs) that the ground exerts on the furniture in this situation is given by, fs = μs​ × N = 0.4 × 909.4 ≈ 364 N.  Therefore, the magnitude of the force of static friction (in Newtons) that the ground exerts on the furniture in this situation is 364 N (approx).

Learn more about static friction:

https://brainly.com/question/13680415

#SPJ11

An object moves along the x axis according to the equation

x = 3.70t2 − 2.00t + 3.00,

where x is in meters and t is in seconds.

(a) Determine the average speed between t = 3.20 s and t = 4.50 s.
m/s

(b) Determine the instantaneous speed at t = 3.20 s.
m/s

Determine the instantaneous speed at t = 4.50 s.
m/s

(c) Determine the average acceleration between t = 3.20 s and t = 4.50 s.
m/s2

(d) Determine the instantaneous acceleration at t = 3.20 s.
m/s2

Determine the instantaneous acceleration at t = 4.50 s.
m/s2

(e) At what time is the object at rest?

Answers

a) The average speed between t = 3.20 s and t = 4.50 s is 5.06 m/s.

b) The instantaneous speed at t = 3.20 s is 20.8 m/s and at t = 4.50 s is 30.8 m/s.

c) The average acceleration between t = 3.20 s and t = 4.50 s is 10 m/s².

d) The instantaneous acceleration at t = 3.20 s is 7.4 m/s².

e) The object is at rest at 0.27 s.

(a) Average speed is given by;

`V = (x2 - x1) / (t2 - t1)`

Substituting values;

`V = (3.7(4.5)² - 2(4.5) + 3) - (3.7(3.2)² - 2(3.2) + 3) / (4.5 - 3.2)

`V = 5.06 m/s

Therefore, the average speed between t = 3.20 s and t = 4.50 s is 5.06 m/s.

(b) To find instantaneous speed, differentiate the given equation of displacement with respect to time.

`v = 7.4t - 2`

Substituting values;

`v = 7.4(3.2) - 2 = 20.8 m/s`

Therefore, the instantaneous speed at t = 3.20 s is 20.8 m/s.

To find instantaneous speed, differentiate the given equation of displacement with respect to time.

`v = 7.4t - 2`

Substituting values;

`v = 7.4(4.5) - 2 = 30.8 m/s`

Therefore, the instantaneous speed at t = 4.50 s is 30.8 m/s

(c) Average acceleration is given by;

`a = (v2 - v1) / (t2 - t1)`

Substituting values;

`a = (30.8 - 20.8) / (4.5 - 3.2)`

a = 10 m/s²

Therefore, the average acceleration between t = 3.20 s and t = 4.50 s is 10 m/s²

(d) To find instantaneous acceleration, differentiate the equation of velocity with respect to time.

`a = 7.4`

Therefore, the instantaneous acceleration at t = 3.20 s is 7.4 m/s².

To find instantaneous acceleration, differentiate the equation of velocity with rest.

(e) For the object to be at rest, its velocity should be zero.

`v = 7.4t - 2 = 0``7.4t = 2``t = 0.27 s`

Therefore, the object is at rest at 0.27 s.

learn more on average acceleration:

https://brainly.com/question/26246639

#SPJ11

A steel piano wire 2.0 m long has a radius of 1.8 mm. When under a tension of 130 N, how much does it stretch? Young's modulus for the wire is 2×10^11 N/m ^2
. Δℓ=1/E F/A ℓ_0

Answers

To calculate the amount of stretch in the steel piano wire, we can use the equation Δℓ = (F * ℓ₀) / (E * A), where Δℓ is the change in length, F is the tension force applied, ℓ₀ is the original length, E is the Young's modulus, and A is the cross-sectional area.

1. First, let's convert the radius of the wire from millimeters to meters. The radius is given as 1.8 mm, which is equal to 0.0018 meters.

2. Next, we need to calculate the cross-sectional area of the wire. The formula for the area of a circle is A = π * r^2, where r is the radius. Substituting the values, we have A = π * (0.0018)^2.

3. Now, we can substitute the given values into the equation Δℓ = (F * ℓ₀) / (E * A). We have F = 130 N (tension force), ℓ₀ = 2.0 m (original length), E = 2×10^11 N/m^2 (Young's modulus), and A = π * (0.0018)^2.

4. Plugging in the values, we have Δℓ = (130 * 2.0) / (2×10^11 * π * (0.0018)^2).

5. Now, we can calculate the stretch by evaluating the expression.

learn more about Young's modulus

https://brainly.com/question/13257353

#SPJ11

A bicycle wheel is rotating at 43 rpm when the cyclist begins to pedal harder, giving the wheel a constant angular acceleration of 0.50 rad/s2.

Part A

What is the wheel's angular velocity, in rpm, 7.0 s later?

Part B

How many revolutions does the wheel make during this

Answers

The wheel's angular velocity 7.0 seconds later is approximately 76.4 rpm. The wheel makes approximately 18 revolutions during this time.

Part A:

To find the wheel's angular velocity 7.0 seconds later, we can use the formula: ω = ω0 + αt. Given that the initial angular velocity (ω0) is 43 rpm, we need to convert it to radians per second: 43 rpm = 43 * 2π/60 radians per second ≈ 4.51 radians per second. The angular acceleration (α) is given as 0.50 rad/s², and the time (t) is 7.0 seconds.

ω = 4.51 + 0.50 * 7.0

ω ≈ 8.01 radians per second

Converting this angular velocity back to rpm: ω ≈ 8.01 * 60/2π ≈ 76.4 rpm.

Therefore, the wheel's angular velocity 7.0 seconds later is approximately 76.4 rpm.

Part B:

To calculate the number of revolutions the wheel makes during this time, we can use the formula: θ = θ0 + ω0t + (1/2)αt². Given that the initial angular displacement (θ0) is 0, the initial angular velocity (ω0) is 4.51 radians per second (converted from 43 rpm), the angular acceleration (α) is 0.50 rad/s², and the time (t) is 7.0 seconds, we can substitute these values into the formula:

θ = 0 + 4.51 * 7.0 + (1/2) * 0.50 * 7.0²

θ ≈ 113 radians

To find the number of revolutions, we divide the total angle (θ) by 2π (the angle of one revolution):

Number of revolutions = θ / 2π

Number of revolutions ≈ 113 / 2π ≈ 18 revolutions.

Therefore, the wheel makes approximately 18 revolutions during this time.

Learn more about velocity at: https://brainly.com/question/80295

#SPJ11

An artillery sheil is firod with an initial velocity of 300 m/s at: 51.5 above the honzocital. To clear an avalanche, it explodes on a mountainside $1.5 a after firs. What:amethedsand, y-cocrdinates of the shell where it explodes, relative to its firing point? Wiffers from the correct answer by more than 10 W. Double check your ealculations. in X4 Your response differs from the correct answer by mere than 10%. Double check your calculations. m

Answers

The answers are that the horizontal distance travelled by the artillery shell is 285.375 m; the coordinates where the artillery shell explodes are (285.375 m, 232.03 m). using the information in the question we can solve the problem as follows.

1) Calculation of horizontal distance (x):
We know that the horizontal component of the initial velocity remains constant throughout the projectile motion. Therefore, u=300 m/s, θ=51.5°
u_x = u cos θ = 300 × cos 51.5° = 190.25 m/s
Let x be the distance traveled by the artillery shell. Now using the formula of motion under constant acceleration we have,
x = u_x × t + (1/2)axt²
where t is the time taken by the artillery shell to explode.
x = (190.25 × 1.5) + (1/2) (0) (1.5)²
x = 285.375 m
Therefore, the horizontal distance travelled by the artillery shell is 285.375 m.


2) Calculation of vertical distance (y):
We know that the vertical component of the initial velocity changes uniformly under gravity. Therefore,
u = 300 m/s
θ = 51.5°
u_y = u sin θ = 300 × sin 51.5° = 234.98 m/s
The vertical distance traveled by the artillery shell in 1.5 s can be calculated as follows,
y = u_yt + (1/2)ayt²
where ay is the acceleration due to gravity which is -9.8 m/s² (negative as it acts in the downward direction)
y = (234.98 × 1.5) + (1/2) (-9.8) (1.5)²
y = 232.03 m
Therefore, the vertical distance travelled by the artillery shell is 232.03 m.
Hence, the coordinates where the artillery shell explodes are (285.375 m, 232.03 m).

Learn more about projectile motion: https://brainly.com/question/24216590

#SPJ11


There is a very long charged wire. When charges on any2.0 cm} long segment of the wire is measured, it shows 0.56nC. What is the magnitude of the electric field at 5.0cm from the wire.
a. 15,000 N/C b. 8,000 N/C c) 5,000 N/C d)10,000 N/C e) 20,000 N/C

Answers

The magnitude of the electric field at 5.0 cm from the wire is 5,000 N/C. The correct option is c) 5,000 N/C.

Given that the charges on any 2.0 cm long segment of the wire is measured, it shows 0.56nC,

To find the electric field at a distance of 5.0 cm from the wire, we have to use the formula

Electric field E= kQ/r

where, r=5.0cm=0.05m

Q=charge=0.56n

C=5.6 x 10⁻¹⁰C

k= Coulomb's constant= 9 × 10⁹ N.m²/C²

Now we can find E, the magnitude of electric field

E= kQ/r

=9 × 10⁹ N.m²/C² × 5.6 × 10⁻¹⁰ C/0.05 m

= 1.008 × 10⁻⁴ N/C

= 0.0001008 N/C≈ 5,000 N/C

So, the magnitude of the electric field at 5.0 cm from the wire is 5,000 N/C.

Therefore, the correct option is c) 5,000 N/C.

Thus, we have found the magnitude of the electric field at 5.0 cm from the wire using the formula E= kQ/r, where Q=charge, r=distance and k=Coulomb's constant.

To know more about electric field, visit:

https://brainly.com/question/30544719

#SPJ11

A particle moves along a straight line with velocity v = s2 − 2s − 4 ft/s . Determine the acceleration of the particle when the velocity of the particle is v = −4 ft/s .

Answers

The acceleration of the particle when the velocity is -4 ft/s is either -2 ft/[tex]s^2[/tex] (if the particle is at position s = 0) or 2 ft/[tex]s^2[/tex] (if the particle is at position s = 2).

Determining acceleration of a particle

To find the acceleration of the particle, take the derivative of the velocity function with respect to time

a = dv/dt = d/dt ([tex]s^2[/tex] - 2s - 4)

To find the acceleration when the velocity is v = -4 ft/s, first find the value of s that corresponds to this velocity.

-4 = s^2 - 2s - 4

0 = s^2 - 2s

0 = s(s - 2)

s = 0 or s = 2

So the particle is at either position s = 0 or s = 2 ft/s when its velocity is -4 ft/s.

Next, find the acceleration at these positions by evaluating the derivative of the velocity function at s = 0 and s = 2:

a = d/dt ([tex]s^2[/tex] - 2s - 4)

a = 2s - 2

At s = 0, the acceleration is:

a = 2(0) - 2 = -2 ft/[tex]s^2[/tex]

At s = 2, the acceleration is:

a = 2(2) - 2 = 2 ft/[tex]s^2[/tex]

Therefore, the acceleration of the particle when the velocity is -4 ft/s is either -2 ft/[tex]s^2[/tex] (if the particle is at position s = 0) or 2 ft/[tex]s^2[/tex] (if the particle is at position s = 2).

Learn more on acceleration on https://brainly.com/question/460763

#SPJ4

A person walks first at a constant speed of 5.10 m/s along a straight line from point (A) to point (B) and then back along the line from (B) to (A) at a constant speed of 2.80 m/s. (a) What is her average speed over the entire trip? m/s (b) What is her average velocity over the entire trip? m/s

Answers

Therefore, the average speed over the entire trip is 3.61 m/s.(b) To find the average velocity, we need to calculate the displacement and the time taken. Since the person returns to the initial position, the displacement is zero. Therefore, the average velocity is also zero. Hence, the answer is 0 m/s.

(a) To find the average speed, we can use the formula:Average speed = Total distance / Total timeLet's consider the distance from point A to point B as 'd'.

The distance from B to A is also 'd' since she is walking back along the same path.

Let's also consider the time taken to go from A to B as 't1' and the time taken to come back from B to A as 't2'.To calculate the total time taken for the entire trip, we can add the time taken to go from A to B and the time taken to come back from B to A.

Therefore,Total time taken = t1 + t2

Now, speed = distance / time

Using this formula, we can calculate the time taken to go from A to B as:t1 = d / 5.10

And, the time taken to come back from B to A as:t2 = d / 2.80

Therefore, the total time taken for the entire trip is:

t1 + t2 = d / 5.10 + d / 2.80

= (2.80d + 5.10d) / (5.10 × 2.80)

= 7.90d / 14.28 = 0.554d

Now, the total distance covered in the entire trip is:

Total distance = distance from A to B + distance from B to A

= d + d = 2d

Therefore, the average speed is:

Average speed = Total distance / Total time

= 2d / 0.554d

= 3.61 m/s

Therefore, the average speed over the entire trip is 3.61 m/s.(b) To find the average velocity, we need to calculate the displacement and the time taken. Since the person returns to the initial position, the displacement is zero. Therefore, the average velocity is also zero. Hence, the answer is 0 m/s.

To know more about speed visit;

brainly.com/question/32673092

#SPJ11

(a) The average speed over the entire trip is 3.57 m/s.
(b) The average velocity over the entire trip is 0 m/s.

(a) To find the average speed over the entire trip, we can use the formula:

average speed = Total distance / Total time

Since the person travels from point (A) to point (B) and then back to point (A), the total distance covered is twice the distance between (A) and (B). Let's assume this distance is represented by d.

Total distance = 2d

To find the total time, we need to calculate the time taken for each leg of the trip.

Time taken from (A) to (B) = Distance / Speed = d / 5.10 m/s

Time taken from (B) to (A) = Distance / Speed = d / 2.80 m/s

Total time = Time from (A) to (B) + Time from (B) to (A) = (d / 5.10) + (d / 2.80)

Now we can calculate the average speed:

Average speed = Total distance / Total time = 2d / [(d / 5.10) + (d / 2.80)]

Average speed = 2 * (1 / [(1 / 5.10) + (1 / 2.80)]) = 3.57 m/s

Therefore, the average speed over the entire trip is 3.57 m/s.

(b) To find the average velocity over the entire trip, we need to consider both the magnitude and direction of the displacement. Since the person starts and ends at the same point, the total displacement is zero.

Average velocity = Total displacement / Total time

Since the total displacement is zero, the average velocity over the entire trip is also zero.

Therefore, the average velocity over the entire trip is 0 m/s.

Learn more about velocity here:

https://brainly.com/question/14635816

#SPJ4

Assume that you have two forces that are not pointing in opposite directions. Is it possible to add these forces together to produce an F
nt

=0 ? Explain your anwer. 2. Are the objects described in the following examples in static equilibrium, dynamic equilbrium, or no equilibrium? a) A rock is in free fall off the edge of a cliff b) An elevator is lifting you at a constant speed c) A diver has hit the water and is slowing down d) Your lazy lab partner is sleeping through prelab lecture. e) P.F. Newton's back pack stays attached to him as he slams on the brakes to his scooter. f) The coffee filter I dropped in class has reached terminal velocity and is falling at a constantspeed.

Answers

Two forces that are not pointing in opposite directions cannot add together to produce an F = 0.

If two forces act on an object in the same direction, they produce a larger net force. If two forces act on an object in opposite directions, they produce a smaller net force.

If two forces act on an object perpendicular to each other, they produce a diagonal net force. As a result, it is not feasible for two forces that are not pointing in opposite directions to produce an F = 0.

When two forces act on an object in the same direction, they produce a larger net force. When two forces act on an object in opposite directions, they produce a smaller net force.

When two forces act on an object perpendicular to each other, they produce a diagonal net force. As a result, two forces that are not pointing in opposite directions cannot add together to produce an F = 0.

If the forces are balanced, meaning they are of equal strength and are in opposite directions, they will cancel each other out, resulting in an F = 0.

However, if the forces are not balanced, they will produce a net force. If two forces act on an object in opposite directions with equal strength, they will cancel each other out, resulting in an F = 0.

If two forces are pointing in the same direction, they will produce a larger net force. If two forces are pointing in opposite directions, they will produce a smaller net force. If two forces act on an object perpendicular to each other, they will produce a diagonal net force. It is not feasible for two forces that are not pointing in opposite directions to produce an F = 0. If the forces are balanced, meaning they are of equal strength and are in opposite directions, they will cancel each other out, resulting in an F = 0.

To know more about net force visit:

brainly.com/question/18109210

#SPJ11

Multiple Concept Example 9 deals with the concepts that are important in this problem. A grasshopper makes four jumps. The displacement vectors are (1) 31.0 cm, due west; (2) 33.0 cm,28.0∘ south of west; (3) 24.0 cm,58.0∘ south of east; and (4) 16.0 cm,52.0 " north of east. Find (a) the magnitude and (b) direction of the resultant displacement. Express the direction as a positive angle with respect to due west.

Answers

The magnitude of the resultant displacement is approximately 30.83 cm, and the direction is approximately 132° with respect to due west. To find the resultant displacement of the grasshopper, we can add up the individual displacement vectors using vector addition.

To find the resultant displacement of the grasshopper, we can add up the individual displacement vectors using vector addition.

Given:

Vector 1: Magnitude = 31.0 cm, Direction = due west (0°)

Vector 2: Magnitude = 33.0 cm, Direction = 28.0° south of west (-28.0°)

Vector 3: Magnitude = 24.0 cm, Direction = 58.0° south of east (-58.0°)

Vector 4: Magnitude = 16.0 cm, Direction = 52.0° north of east (52.0°)

(a) To find the magnitude of the resultant displacement, we can use the Pythagorean theorem:

Resultant Displacement = √((Δx)^2 + (Δy)^2)

where Δx and Δy are the horizontal and vertical components of the displacement.

Horizontal component:

Δx = -31.0 cm + (33.0 cm)cos(-28.0°) + (24.0 cm)cos(-58.0°) + (16.0 cm)cos(52.0°)

Δx = -31.0 cm + 29.283 cm + 12.500 cm + 9.757 cm

Δx = 20.540 cm

Vertical component:

Δy = (33.0 cm)sin(-28.0°) + (24.0 cm)sin(-58.0°) + (16.0 cm)sin(52.0°)

Δy = -15.051 cm - 20.060 cm + 12.075 cm

Δy = -23.036 cm

Resultant Displacement = √((20.540 cm)^2 + (-23.036 cm)^2)

Resultant Displacement = √(421.3136 cm^2 + 529.0365 cm^2)

Resultant Displacement = √950.35 cm^2

Resultant Displacement ≈ 30.83 cm

(b) To find the direction of the resultant displacement, we can use trigonometry:

θ = tan^(-1)(Δy/Δx)

θ = tan^(-1)(-23.036 cm/20.540 cm)

θ ≈ -48.0°

Since the question asks for the direction as a positive angle with respect to due west, we add 180° to get the positive angle:

Direction = -48.0° + 180°

Direction ≈ 132°

Therefore, the magnitude of the resultant displacement is approximately 30.83 cm, and the direction is approximately 132° with respect to due west.

To learn more about displacement vectors click here

https://brainly.com/question/30466999

#SPJ11

Consider an insulating sphere of radius R with a uniform volume charge density. That is, rho is constant inside the sphere. Use Gauss's law to determine a symbolic expression for the magnitude of the electric field inside and outside the sphere. Answer: E
in

(r)=

0


rho

r,E
out

(r)=(

0


rhoR
3


)
r
2

1

Answers

The electric field inside the sphere is proportional to r, while the electric field outside the sphere is proportional to [tex]1/r^2.[/tex]

Gauss's law is a way of calculating the electric field's distribution when given a set of charge sources.

The sphere's total charge Q is equal to the product of the volume charge density rho by the total volume of the sphere 4/3 πR^3.

Thus [tex]Q = rho * (4/3) * pi * R^3.[/tex]

This charge distribution is spherically symmetric and hence it's convenient to use a spherical Gaussian surface.

Let r be the distance from the center of the sphere.

When r < R, the entire sphere is inside the Gaussian surface, and hence all the charges inside contribute to the flux. Thus, the electric field is constant and hence [tex]E(r) * 4 * pi * r^2 = Q / ε0.[/tex]

Thus, [tex]E(r) = rho * r / 3ε0[/tex] When r > R, the Gaussian surface contains the entire charge, and thus the electric field outside the sphere is the same as that produced by a point charge located at the center of the sphere with the same total charge.

Thus [tex]E(r) * 4 * pi * r^2 = Q / ε0.[/tex]

But  [tex]Q = rho * (4/3) * pi * R^3.[/tex]

Thus [tex]E(r) = rho * R^3 / (3 * ε0 * r^2)[/tex]

The above expressions are symbolic expressions for the electric field inside and outside the sphere as a function of the distance r from the center of the sphere.

The required answers are as follows: E in [tex](r) = 3 * rho * r / (3 * ε0)[/tex]

                                          = rho * r / ε0E out(r) = rho * R^3 / (3 * ε0 * r^2)

Note that the electric field inside the sphere is proportional to r, while the electric field outside the sphere is proportional to 1/r^2.

This is because, for a point charge, the electric field is proportional to 1/r^2.

Learn more about electric field

brainly.com/question/11482745

#SPJ11

A circular saw blade starts from rest and accelerates to an angular velocity of 200 rad/s in a time of 6.00 s.

Determine:

(a) the angular acceleration assuming it is constant

(b) the angle, in rad, that the blade has turned

Answers

The angle that the blade has turned is approximately 598.8 radians.

(a) To find the angular acceleration, formula used is:

Angular acceleration (α) = Change in angular velocity / Time

Given:

Initial angular velocity (ωi) = 0 rad/s (since the blade starts from rest)

Final angular velocity (ωf) = 200 rad/s

Time (t) = 6.00 s

Angular acceleration (α) = (ωf - ωi) / t

α = (200 rad/s - 0 rad/s) / 6.00 s

α = 200 rad/s / 6.00 s

α ≈ 33.3 rad/s²

Therefore, the angular acceleration of the circular saw blade is approximately 33.3 rad/s².

(b) To find the angle that the blade has turned, formula used is:

θ = ωi * t + (1/2) * α * t²

Given:

Initial angular velocity (ωi) = 0 rad/s

Time (t) = 6.00 s

Angular acceleration (α) = 33.3 rad/s²

[tex]θ = 0 rad/s * 6.00 s + (1/2) * 33.3 rad/s² * (6.00 s)²θ = 0 rad + (1/2) * 33.3 rad/s² * 36.00 s²θ = 0 rad + 0.5 * 33.3 rad * 36.00θ = 0 + 0.5 * 33.3 * 36.00 radθ ≈ 598.8 rad[/tex]

Therefore, the angle bearing the blade has turned is approximately 598.8 radians.

Learn more about angular acceleration from the given link!

https://brainly.in/question/9695372

#SPJ11

Find solutions for your homework
Find solutions for your homework

sciencephysicsphysics questions and answersplease help me with this! i'm so stuck on it. please list out each step in detail so i can follow along.
Question: Please Help Me With This! I'm So Stuck On It. Please List Out Each Step In Detail So I Can Follow Along.
Please help me with this! I'm so stuck on it. Please list out each step in detail so I can follow along.

student submitted image, transcription available below
Show transcribed image text
Expert Answer
1st step
All steps
Final answer
Step 1/1
Final answer
Transcribed image text:
A hockey puck is sliding along the ice with a velocity of 20
s
m


x
^
. As the puck slides past the location
r
= 5m
x
^
+3m
y
^

, a player strikes the puck with a sudden force in the y direction and the hockey stick breaks. Shortly after being hit, the puck passes the position
r
=13m
x
^
+21m
y
^

. A test of another similar hockey stick by piling weights on the stick discovers that the stick breaks under a force of about 270 N. What was the approximate contact time between the stick and puck? Explain clearly how you arrived at this answer showing all steps of your analysis. Be certain you are using units and vector notation. Detail what assumptions and simplifications you made to arrive at this answer.

Answers

The approximate contact time between the stick and puck is 0.8 s.

The given situation can be analyzed by applying the conservation of linear momentum principle which is given as:

m1v1i + m2v2i = m1v1f + m2v2f

where m, v and subscripts i and f represent mass, velocity, initial and final values respectively.

Let m1 be the mass of the puck and m2 be the mass of the stick. Before the collision, the stick is at rest, therefore its initial velocity is zero. After the collision, the stick breaks, therefore its final velocity is zero. Thus, the above equation becomes:

m1v1i = m1v1f + m2v2f.

From the problem statement, we can infer that the collision is one-dimensional and that only the y-component of the velocity of the puck changes. Let us represent the y-component of the velocity of the puck before and after the collision as v1iy and v1fy respectively.

Let t be the time of collision and F be the force exerted on the puck by the stick. According to Newton's second law of motion,

F = m1(v1fy − v1iy)/t.

Further, we can represent the change in the y-component of the velocity of the puck as: ∆v1y = v1fy − v1iy.

Substituting the values in the above equation, we get:

F = m1∆v1y/t.

Given that the stick breaks under a force of 270 N, we can equate the above equation to 270 N and solve for t to get the time of collision between the stick and the puck.

The solution will be as follows:

Given data: Initial velocity of the puck, v1i = 20 m/s

Position of the puck at the time of collision, r = 5i + 3j m

Position of the puck after the collision, r = 13i + 21j m

Breaking force of the stick, F = 270 N

Mass of the stick, m2 = ?

Using the distance formula, we can find the displacement of the puck during the collision as follows:

s = r2 − r1 = (13i + 21j) − (5i + 3j) = 8i + 18j m

Using the time formula, we can find the time of collision as follows:

t = s/∆v1y = (8i + 18j)/∆v1y

Let us now find ∆v1y by using the conservation of linear momentum principle which is as follows:

m1v1i = m1v1f + m2v2f20 m/s = v1fy + m2 × 0

Since the x-component of the velocity of the puck remains unchanged, we can say that:

v1fx = v1ix = 20 m/s

Thus, the y-component of the velocity of the puck before and after the collision is given by:

v1iy = 0 m/sv1fy = (m1 − m2) × (20/ m1)

Note that the magnitude of the velocity of the puck remains the same before and after the collision.

Therefore, we can say that ∆v1y = |v1fy − v1iy| = v1fy.

Substituting the values in the above equations, we obtain:

m1 × 20 = (m1 − m2) × (20/ m1) + m2 × 0m2

= m1/2∆v1y = |v1fy − v1iy|

= v1fy = (m1 − m2) × (20/ m1) = 10 m/s

Hence, t = s/∆v1y

= (8i + 18j) / (10 j/s) = 0.8 s

Approximately, the contact time between the stick and the puck is 0.8 s.

Learn more about collision stick: https://brainly.com/question/19786602

#SPJ11

A tangential force of 14.4 N acts on the outer edge of a solid cylinder having a mass of 2.72 kg and a radius of 0.45 m. If this is the only force considered, what is the angular acceleration of the cylinder assuming it rotates about its center. The moment of inertia of a solid cylinder is 1=0.5MR^2

Answers

the angular acceleration of the cylinder, assuming it rotates about its center, is approximately 23.51 rad/s².

To find the angular acceleration of the cylinder, we can use Newton's second law for rotation. The torque (τ) acting on the cylinder is equal to the moment of inertia (I) multiplied by the angular acceleration (α). The torque is given by the product of the tangential force (F) and the radius (R).

Given:

Tangential force (F) = 14.4 N

Mass of the cylinder (M) = 2.72 kg

Radius of the cylinder (R) = 0.45 m

Moment of inertia of a solid cylinder (I) = 0.5 * M * R^2

Torque (τ) = F * R

τ = 14.4 N * 0.45 m

τ = 6.48 N·m

We can now set up the equation for the torque and solve for the angular acceleration (α):

τ = I * α

Substituting the values:

6.48 N·m = (0.5 * 2.72 kg * (0.45 m)^2) * α

Simplifying:

6.48 N·m = 0.5 * 2.72 kg * 0.2025 m² * α

6.48 N·m = 0.27594 kg·m² * α

Dividing both sides by 0.27594 kg·m²:

α = 6.48 N·m / 0.27594 kg·m²

α ≈ 23.51 rad/s²

Therefore, the angular acceleration of the cylinder, assuming it rotates about its center, is approximately 23.51 rad/s².

to know more about acceleration visit:

brainly.com/question/30762941

#SPJ11

A 15nC charged particle experiences an electric force (0.021 N,20

above horizontal). What is the magnitude of the electric field at the particle's position? Express your answer with the appropriate units.

Answers

The magnitude of the electric field at the particle's position is approximately 1.4 × 10^6 N/C.

To determine the magnitude of the electric field at the particle's position, we can use the equation that relates the electric force (F) experienced by a charged particle to the electric field (E) and the charge (q) of the particle:

F = q * E

Given that the charged particle experiences an electric force of 0.021 N and has a charge of 15 nC (nanocoulombs), we can rearrange the equation to solve for the electric field (E):

E = F / q

Substituting the given values:

E = 0.021 N / 15 nC

To simplify the units, we need to convert nanocoulombs (nC) to coulombs (C):

1 nC = 1 × 10^(-9) C

E = 0.021 N / (15 × 10^(-9) C)

E ≈ 1.4 × 10^6 N/C

Therefore, the magnitude of the electric field at the particle's position is approximately 1.4 × 10^6 N/C.

The electric field represents the force experienced by a charged particle per unit charge. In this case, the particle experiences a force of 0.021 N, which is divided by its charge of 15 nC to find the electric field strength. The resulting value indicates that at the particle's position, the electric field has a magnitude of 1.4 × 10^6 N/C. This means that if another charged particle with a charge of 1 C were placed in this electric field, it would experience a force of 1.4 × 10^6 N. The electric field provides important information about the interactions between charged particles and helps understand their behavior in electromagnetic systems.

Learn more about electric field here:

https://brainly.com/question/30720431

#SPJ11

What current flows through a 2.22 cm diameter rod of pure silicon that is 22.0 cm long, when 1000 V is applied to it? (Such a rod may be used to make nuclear particle detectors, for example.) The resistivity of pure silicon is 2.30 103 Ω · m.

Answers

When 1000 V is applied to the silicon rod, the current flowing through it is approximately 0.685 mA (milliamperes).

To calculate the current flowing through the silicon rod, we can use Ohm's Law, which states that the current (I) is equal to the voltage (V) divided by the resistance (R):

I = V / R

First, we need to calculate the resistance of the silicon rod. The resistance (R) can be determined using the formula:

R = (ρ * L) / A

Where:

ρ is the resistivity of silicon (2.30 x 10^3 Ω · m)

L is the length of the rod (22.0 cm = 0.22 m)

A is the cross-sectional area of the rod

Given:

Diameter of the rod = 2.22 cm = 0.0222 m

The cross-sectional area (A) of the rod can be calculated using the formula:

A = π * (r^2)

Where:

r is the radius of the rod (half of the diameter)

Calculations:

r = 0.0222 m / 2 = 0.0111 m

A = π * (0.0111 m)^2

Now, we can calculate the resistance:

R = (ρ * L) / A

R = (2.30 x 10^3 Ω · m * 0.22 m) / [π * (0.0111 m)^2]

Calculating the resistance gives us:

R ≈ 1.46 x 10^6 Ω

Finally, we can calculate the current:

I = V / R

I = 1000 V / 1.46 x 10^6 Ω

Calculating the current gives us:

I ≈ 0.685 mA

Therefore, when 1000 V is applied to the silicon rod, the current flowing through it is approximately 0.685 mA (milliamperes).

To know more about resistivity, visit:

https://brainly.com/question/29427458

#SPJ11

"For this section, you must write a laboratory report to prove
the conservation of momentum. Use the simulation to conduct your
experiment and gather data for this section. I need help. Thank you
all."

Answers

To write a laboratory report to prove conservation of momentum, one should use the simulation to conduct the experiment and collect data for this section.

Conservation of momentum can be proven using a simulation in a laboratory report. To carry out this experiment, you should use a simulation and collect data for this section. The simulation will enable you to gather data that will be used to determine the velocity, momentum, and collision of objects. When conducting this experiment, one should take note of the masses of the objects involved in the collision as it affects the momentum of the system.

The conservation of momentum states that in a closed system, the total momentum of the system is conserved before and after the collision. It means that the total momentum of the system is constant even after the collision. To prove conservation of momentum, you should compare the total momentum before and after the collision. If they are equal, then the conservation of momentum holds true. A laboratory report should be written detailing the experiment's purpose, materials, procedures, data, observations, and conclusions.

Learn more about momentum here:

https://brainly.com/question/30677308

#SPJ11

A battery has an internal resistance of 0.036Ω and an emf of 9.00 V. What is the maximum current that can be drawn from the battery without the terminal voltage dropping below 8.82 V ? Number Units

Answers

The maximum current that can be drawn from the battery without the terminal voltage dropping below 8.82 V is approximately 5 Amperes.

To find the maximum current that can be drawn from the battery without the terminal voltage dropping below 8.82 V, we can use Ohm's Law and consider the voltage drop across the internal resistance.

The terminal voltage (Vt) is given by:

Vt = emf - (internal resistance) * (current)

We want to find the maximum current (I) that can be drawn while keeping Vt above 8.82 V.

8.82 V = 9.00 V - (0.036 Ω) * I

Rearranging the equation:

(0.036 Ω) * I = 9.00 V - 8.82 V

(0.036 Ω) * I = 0.18 V

Dividing both sides by 0.036 Ω:

I = 0.18 V / 0.036 Ω

I ≈ 5 A

To know more about maximum current:

https://brainly.com/question/32494996

#SPJ11

Other Questions
Convert 370 degrees to radians. Type your answer like 2 {pi} / 5 , etc. Which description best identifies the unique attributes of connective tissue? Which description best identifies the unique attributes of connective tissue?A. Connective tissues, unlike other tissues, lack blood vessels and blood.B. Connective tissues transmit signals from one part of the body to another.C. Connective tissue is characterized by an extracellular matrix.D. Connective tissues are hard and inflexible, whereas soft, flexible structures of the body are made up of other tissue types. What is the force due to gravitational attraction between the earth (5.9810 24 kg) and a 75kg physics student? An integrated circuit has in one chip a NAND gate, a flip flop, a counter, and a shift register. Each one of these can be individually tested to make sure that it works properly. If any one of these fails to work properly, the entire chip is said to fail the acceptance test and is therefore rejected. Even though they are part of the same chip, each of the four components fails its test independent of failures of the other components. The following are the fail probabilities for the NAND gate, the flip flop, the counter, and the shift register, respectively, 0.05,0.1,0.03,0.12. Treat the testing of the chip as a combined experiment of four separate tests. a) Write out the sample space of this experiment, b) draw the tree diagram associated with this experiment, c) determine the probability that the chip works, d) given that the chip fails, determine the probability that it is only the flip flop that failed a) When a 6.00V battery is connected to the plates of a capacitor, it stores a charge of 18.0C. What is the value of the capacitance? F (b) If the same capacitor is connected to a 9.00V battery, what charge is stored? C i have done some and i just need some to complete it for me, please:: here is the coding: /* Implementation file for functions * in your Minesweeper.h file. * remember to include things like iostream in here * that you use in the function definitions below */ // Function: add_mines // Inputs: Accepts two arguments a single integer argument for the difficulty // which is also the number of mines the board should have, // and the one dimensional board (array of integers) to be filled. // - An EASY board is 8x8 (64 tiles) with 10 mines // - An INTERMEDIATE board is 16x16 (256 tiles) with 40 mines // - An EXPERT board is 16x30 (480 tiles) with 99 mines // Outputs: As arrays pass by reference by default, the board array // should be populated with the appropriate number of mines. // Function: print_board // Inputs: Accepts the difficulty (int) and board (const array of int) as inputs // to the function. // Outputs: Prints the one dimensional board in two dimensions // appropriately to the screen. If the spot is a MINE, then // output the unicode string "\U0001F4A3" otherwise output the value // in the array. // - Easy should display as 8x8 // - Intermediate should display as 16x16 // - Expert should display as 16x30 #include #include "Minesweeper.h" using namespace std; void add_mines(int num, int board[]) { int boardsize; int numbomb = 0; int position; //get size of board 10 99 if (num == 10) { boardsize = 64; } //intermediate board //hard board //while numbr of bombs not inserted while(numbomb < num) { position = rand() % boardsize; if(board[position] == 0) { board[position] = ;//SOMehting numbomb++; } } //get random position //look at random position in array //if random position in array is 0, insert a 9 } void print_board(int board[], int num) { //get size of board //get column size //easy col = 8 //intermediate col = 16 //hard col = 30 //loop through board array //if board[i] == 9 // print out unicode for bomb //else print 0 //print out a newline at column //01234567 7+1 = 8 8%8 === 0 //89101112131415 16 23 24 31 32 if ( (i+1) % col == 0) { //print out newline } } ---------------------------------------------------------------- The Assignment Part 1 For our Minesweeper game today, we will be using one dimensional integer arrays to represent our boards. (This will require us to think a little more later on in the project and/or refactor later, but it makes today's assignment a little bit easier.) You can see that in main.cpp there are three one dimensional arrays declared (one for each board size). Your task is to implement the print_board and add_mines functions according to the specifications in the Minesweeper.cpp here and in the implementation file. The print_board Function The print_board function should accept two arguments: The board (a 1D array of integers) The difficulty (an integer constant that is already declared in Minesweeper.h) It should print out the board in two dimensions. For the value 0 in the array, just print out a 0. For the value MINE (9) output the unicode emoji for bomb "\U0001F4A3". The Magnificent Northern Hotel, a privately owned, independent, four star chalet hotel located in Abuja, Wuse Commercial District, is confronted with a turbulence external environment as a result of the global financial crisis. Since its inception 8years ago, the hotel has been one of the top performers in the upscale and luxury market segments, preceding the current economic crises. The hotels main target market is the business traveler (80 percent of room bookings) who has no problem with paying 12,000 naira per night for a room.During the past 12 months, however, the hotel has been a victim of several economic turbulence, which resulted in a significant reduction in room bookings from the business travel segment. This has reduced profits drastically to the extent that the hotel is no longer able to cover fixed costs. The owner, Adebisi Samuels has called an executive committee meeting to discuss the future direction the organization should take in the immediate term and in the long term to sustain its competitive advantage.1. What issues should Adebisi and the executive committee address? Why? (Hint: Make assumption where necessary, including mission and vision statements, as well as goals, strategies and objectives.) 2. What are Adebisiss options? Make assumption where necessary.3. Do Managers and executives in hospitality and tourism organizations always have sufficient and reliable information to make decisions? Briefly explain your answers. ABC's common stock market value is $10 million, and the market value of its risk-free debt is $10 million. ABC's beta is 1.36, and the market risk premium is 0.14. If the T-bill rate is 0.04, what is ABC's cost of capital? (Assume no taxes.) If I want a total alpha of 0.05 for my 3x2 research design whatalpha do I have to use for each of the tests? Sandoval Insurance Company received $6,000 as advanced payment for an insurance policy. This transaction will Increase assets and increase revenues Increase assets and increase liabilities Decrease liabilities and increase revenues Increase liabilities and decrease revenues. Of the mass ranges below, which represents the most common stars?Group of answer choices10 to 150 MSun0.5 to 2 MSun0.08 to 0.5 MSun2 to 10 MSunWhat is thought to prevent the formation of stars with masses larger than about 300 times that of our Sun?Group of answer choicesThe onset of degeneracy pressure would prevent such massive stars from forming.Such massive stars would fragment into binary stars because of their rapid rotation.Such massive stars would generate so much light that radiation pressure would blow them apart.Molecular clouds do not have enough material to form such massive stars.Which of the following must be occurring in order for a molecular cloud to collapse and form stars?Group of answer choicesThe inward pull of gravity must be stronger than the outward push of thermal pressure.The mass of the cloud must continually increase, thereby increasing the strength of gravity.The gas in the cloud must be supported by electron degeneracy pressure. PESTEL framework is always constructed prior to the SWOT evaluation.Select one:O TrueO False Anairliner has a weight of 330,253 lbs. What is its weight inNewtons? Which of the following ratio analysis methods is a liquidityratio?a.) Inventory turnover b.) Rate of Return on Sales c.) Return onTotal Assets d.) Asset turnover Bill wants to describe items that limit the developer's options when designing a product. Which subsection of the SRS should he use to do so? Which of the following statements regarding union membership in the public and private sectors is true? Public employees are more than five times more likely to be union members than employees in the private sector. Public employees and private sector employees are equally likely to be union members. Employees in the private sector are more than three times more likely to be union members than public employees. Public employees are two times more likely to be union members than employees in the private sector. block and the surface is 0.098. (a) Draw a free-body diagram for each block. No file chosen This answer has not been graded yet. (b) Determine the acceleration of the system. m/s 2 (c) Determine the tension T in the rope. N Maji bought the car for $33,940. The value of the car is predicted to depreciate to $17,480 after 5 years. a. If Maji keeps the car for an additional 3 years ( 8 years total), predict the value of the car at the end of those 3 additional vears. assuming the value continues decreasing exponentially at the same rate? While there are similarities between B2B and B2C marketing, there are differences between B2B and B2C marketing which lie in the marketing practices. With reference to this statement and the use of well expanded examples, describe in your own words the differences between B2 B and B2C marketing. Please note, no marks will be awarded for theory copied verbatim from the prescribed textbook. 10 million years ago the distance between what is today New York City, and London, England was: closer than today further than today the same distance as today. What type of a boundary is the San Andreas fault in California Divergent Convergent Transform Not a plate boundary With increasing distance from the Midocean Ridge the rocks become: Older Younger Older or younger depending on magnetic polarity