a) The forces that affect the motion of the passenger are:WE→P: The force of the earth pulling down on the passenger (weight).NS→P: The force of the scale pushing up on the passenger (normal).NO→P: The force of the elevator pushing up on the passenger (normal).
b) The scale reads (in newtons) = 784 Nc) While the elevator is accelerating downward, the forces that have the same magnitude are WE→S and NO→P. The Newton's Third Law of Motion makes me think that they are equal. Newton's third law of motion states that if an object A applies a force on another object B, then B applies a force on A that is equal in magnitude but opposite in direction.
The force that A applies on B is called the action force, and the force that B applies on A is called the reaction force. These two forces always occur in pairs.
To know more about forces refer here:
https://brainly.com/question/13191643#
#SPJ11
-/1 Points] HAFCOLPHYS1 18.3.WA.011. How many volts are supplied to operate an indicator light on a VCR that has a resistance of 130Ω, given 25.5 mA passes through it? V
The indicator light on the VCR, which has a resistance of 130 Ω, operates with a supply voltage of approximately 3.315 volts when a current of 25.5 mA passes through it.
We can calculate the voltage supplied to operate an indicator light on a VCR by using Ohm's Law which states that the voltage across a resistor is directly proportional to the current passing through the resistor and the resistance of the resistor and mathematically can be represented as V = IR, where V is the voltage across the resistor, I is the current passing through the resistor, and R is the resistance of the resistor.
According to the question, the resistance of the indicator light on a VCR is 130Ω, and 25.5 mA current passes through it.
First, let us convert 25.5 mA to amperes by dividing it by 1000.
I = 25.5/1000
= 0.0255 A
Mathematically, V = IR
= (0.0255 A)(130 Ω)
= 3.315 Volts
Hence, 3.315 Volts are supplied to operate an indicator light on a VCR that has a resistance of 130Ω, given 25.5 mA passes through it.
Learn more about voltage from the given link.
https://brainly.com/question/30764403
#SPJ11
A woman on a bridge 86.2 m high sees a raft floating at a constant speed on the river below. She drops a stone from rest in an attempt to hit the raft. The stone is released when the raft has 4.53 m more to travel before passing under the bridge. The stone hits the water 2.10 m in front of the raft. Find the speed of the raft. Number Units
The speed of the raft is approximately 1.08 m/s.
To solve this problem, we can analyze the motion of the stone and the raft separately.
Let's first consider the motion of the stone:
We can use the equation of motion to find the time it takes for the stone to fall from the bridge to the water.
Using the equation:
h = (1/2) * g * t^2
where h is the height, g is the acceleration due to gravity, and t is the time.
86.2 m = (1/2) * 9.8 m/s^2 * t^2.
t ≈ 4.2 s.
Next, we can determine the horizontal distance traveled by the stone during that time.
The horizontal distance is given as 2.10 m.
Now let's consider the motion of the raft:
We know that the raft is floating at a constant speed, so its horizontal velocity remains the same throughout.
The time it takes for the raft to travel the remaining distance of 4.53 m can be calculated using the equation:
distance = velocity * time.
4.53 m = velocity * 4.2
velocity ≈ 1.08 m/s.
Therefore, the speed of the raft is approximately 1.08 m/s.
To know more about gravity, visit:
https://brainly.com/question/31321801
#SPJ11
flies upwards for from t=0 to t=t
1
with an acceleration a
1
. Then the second engine accelerates it upwards from t=t
1
to t=t
2
with an acceleration a
2
. At that point the socket enters freefall and eventually falls back to the ground. A. Consider the first stage ( t=0 to t=t
1
). In terms of the given variables: 1. What is the speed of the rocket at the end of this stage? 2. What is the height of the rocket at the end of this stage? B. Now consider the second stage (t=t
1
to t=t
2
). In terms of the given variables: 1. What is the speed of the rocket at the end of this stage? (Hint: The time interval during this stage is t
2
−t
1
.) 2. What is the height of the rocket at the end of this stage? When the rocket enters freefall, it is 398 m high and moving upwards at 234
s
m
. C. What is the maximum height the rocket reaches? D. After the rocket enters freefall, how long does it take to hit the ground?
The height from which the rocket was dropped is:h is 69550 m. The final velocity at the end of the second stage is 440 m/s. The maximum height the rocket reaches is 9696 m.The final speed of the rocket at the end of the first stage will be:v1 = a1t1 = 30 * 10 = 300 m/s2. The height of the rocket at the end of the first stage will be calculated as:h1 = 1/2 * a1t1^2 = 45000 m
B. In terms of the given variables:
1. The initial velocity at the start of the second stage is the final velocity of the first stage. So, the initial velocity at t1 is:v2i = v1 = 300 m/s
The final velocity at the end of the second stage is:v2f = a2t2 + v2i
The time interval during this stage is t2 − t1 = 50 - 30 = 20 s
Therefore, the final velocity at the end of the second stage is:v2f = a2(t2-t1) + v1 = 20 * 7 + 300 = 440 m/s
2. The height of the rocket at the end of the second stage will be calculated as h2 = 1/2 * (v2i + v2f) * (t2 - t1) = 73500 mC.
The maximum height the rocket reaches: Let's assume that the maximum height is h.
The rocket reaches the maximum height when its velocity becomes zero.
The acceleration due to gravity, g = 9.8 m/s^2
Using the third equation of motion, we can find the maximum height of the rocket:v1^2 = v2^2 + 2gh
Here, v1 = 440 m/s, v2 = 0m/s, and g = 9.8m/s^2
Therefore,h = (v1^2 - v2^2) / 2g = (440^2)/(2*9.8) = 9695.91 m ≈ 9696 m (2 decimal places)
The maximum height the rocket reaches is 9696 m.
D. After the rocket enters freefall, it is 398 m high and moving upwards at 234 m/s.
Let's find the time taken by the rocket to reach the maximum height.t1 = 30 s (given)t2 = 50 s (given)
Therefore, the time taken by the rocket in free fall is:time in free fall = total time - time taken in stage 1 - time taken in stage 2= 100 - 30 - 20= 50 s
The final velocity when it hits the ground is 234 m/s.
Using the second equation of motion, we can find the height from which the rocket was dropped:h = v1t + 1/2gt^2
Here, v1 = 234 m/s, and g = 9.8 m/s^2
Therefore, the height from which the rocket was dropped is:h = 234 * 50 + 1/2 * 9.8 * (50^2) = 69550 m
Approximately, it takes 50 seconds for the rocket to hit the ground.
Learn more about velocity here ;
https://brainly.com/question/30559316
#SPJ11
The symbol rho (rho) represents .... a) the momentum of an object in motion. b) the property of compactness of matter in an object. c) how much matter is in an object. d) the amount of space an object occupies.
The symbol "rho" (ρ) represents the property of compactness of matter in an object, also known as density.
The correct answer is b.
It is the ratio of an object's mass to its volume.
Density is a measure of how much mass is contained within a given volume of an object.
It is typically expressed in units such as kilograms per cubic meter (kg/m³) or grams per cubic centimeter (g/cm³).
The density of an object provides information about its composition and the arrangement of its particles. Different materials have different densities, and this property plays a crucial role in various scientific and engineering applications.
Therefore, The correct answer is b. the property of compactness of matter in an object.
Here you can learn more about density
https://brainly.com/question/10181542#
#SPJ11
A rocket enthusiast shoots a dual-engine model rocket straight up. The rocket siarts from rest and flies upwards for from t=0 to t=t
1
with an acceleration a
1
. Then the second engine accelerates it upwards from t=t
1
to t=t
2
with an acceleration a
2
. At that point the rocket enters freefall and eventually falls back to the ground. A. Consider the first stage ( t=0 to t=t
1
). In terms of the given variables: 1. What is the speed of the rocket at the end of this stage? 2. What is the height of the rocket at the end of this stage?
(1)A rocket enthusiast shoots a dual-engine model rocket straight up. The rocket starts from rest and flies upwards for from t=0 to t=t1 with an acceleration a1. Then the second engine accelerates it upwards from t=t1 to t=t2 with an acceleration a2.(1)The speed of the rocket at the end of the first stage is v₁ = a₁t₁.(2) The height of the rocket at the end of the first stage is h₁ = (1/2)a₁t₁².
(1)To analyze the first stage of the rocket's motion (from t=0 to t=t₁), we can use the kinematic equations of motion. Let's consider the following variables:
a₁ = acceleration during the first stage
t₁ = duration of the first stage
v₁ = velocity of the rocket at the end of the first stage
h₁ = height of the rocket at the end of the first stage (relative to the starting point)
Using the kinematic equation:
v = u + at,
where:
v = final velocity,
u = initial velocity (which is 0 in this case),
a = acceleration,
t = time.
Speed of the rocket at the end of the first stage:
Using the equation v = u + at, we have:
v₁ = 0 + a₁t₁,
v₁ = a₁t₁.
Height of the rocket at the end of the first stage:
Using the kinematic equation:
s = ut + (1/2)at²,
where:
s = displacement,
u = initial velocity,
t = time,
a = acceleration.
Since the rocket starts from rest (u = 0), the equation simplifies to:
s = (1/2)at².
At the end of the first stage, the rocket's displacement (height) is given by:
h₁ = (1/2)a₁t₁².
Therefore, in terms of the given variables:
The speed of the rocket at the end of the first stage is v₁ = a₁t₁.
The height of the rocket at the end of the first stage is h₁ = (1/2)a₁t₁².
To learn more about acceleration visit: https://brainly.com/question/460763
#SPJ11
A small ball is attached to the lower end of a 0.800−m-long string, and the Part A other end of the string is tied to a horizontal rod. The string makes a constant angle of 52.5
∘
with the vertical as the ball moves at a constant speed in a If it takes the ball 1.40 s to complete one revolution, what is the magnitude of the radial acceleration of the ball? horizontal circle. Express your answer with the appropriate units.
The magnitude of the radial acceleration of the ball is 6.53 m/s² (to two decimal places)
Length of the string, l = 0.800 mAngle made by the string with the vertical, θ = 52.5°Time taken to complete one revolution, t = 1.40 sTo find:Radial acceleration of the ball, know that the centripetal acceleration of a body moving in a circular path is given by,a = v²/rHere, v is the speed of the body and r is the radius of the circular path.
Since the speed of the ball is constant, we can say that the centripetal acceleration of the ball is given by,a = 4π²r/T², where T is the time taken to complete one revolution and r is the radius of the circular path.
Now, we need to find the radial acceleration of the ball, which is the component of the centripetal acceleration in the radial direction.
This can be given by,ar = a sinθWe know that sinθ = perpendicular/hypotenuseIn the given figure, the perpendicular is r and the hypotenuse is l. Therefore,sinθ = r/l⇒ r = l sinθSubstituting this value of r in the expression for a, we get,ar = (4π²l sinθ)/T²= (4π² × 0.800 × sin 52.5°)/1.40²= 6.53 m/s²
Therefore, the magnitude of the radial acceleration of the ball is 6.53 m/s² (to two decimal places)
To know more about acceleration :
https://brainly.com/question/460763
#SPJ11
Classify each galaxy using Hubble's Tuning Fork classification system. For each question use only one of these terms to answer: \( \mathbf{S a}, \mathbf{S b}, \mathbf{S c}, \mathbf{S B a}, \mathbf{S B
The classifications of the galaxies using Hubble's Tuning Fork classification system: Sa Sb Sc SBa SB.
Hubble's Tuning Fork classification system is a categorization scheme for galaxies based on their shapes and structures.
The system divides galaxies into elliptical, spiral, and irregular galaxies.
Elliptical galaxies are further divided into categories based on their elongation. Spiral galaxies are classified into two main categories based on the size of their central bulge, and the tightness of their spiral arms.
Irregular galaxies have no definite shape, and cannot be placed into either of the previous categories.
Here are the galaxies' classifications according to Hubble's Tuning Fork system: Sa Sb Sc SBa SB.
Other than the above-mentioned classifications, there are other galaxies as well which have been classified into peculiar galaxies.
These galaxies are not commonly observed and they are not regularly classified. They contain features that are not common and are peculiar to each galaxy.
Examples of peculiar galaxies include interacting galaxies, galaxies with jets, and galaxies with unusually shaped nuclei.
To learn more about galaxies from the given link.
https://brainly.com/question/1840671
#SPJ11
. A placekicker must kick a football from a point 36.0 m (about 40 yards) from the goal. Half the crowd hopes the ball will clear the crossbar, which is 3.05 m high. When kicked, the ball leaves the ground with a speed of 20.0 m/s at an angle of 53.0
∘
to the horizontal. a. By how much does the ball clear or fall short of clearing the crossbar? Answer: The ball clears by 0.889 m b. Does the ball approach the crossbar while still rising or while falling? Answer: while descending
The ball clears the crossbar by 0.889 m. The ball approaches the crossbar while falling. Initial velocity (u) = 20 m/s, Angle of projection (θ) = 53°, Horizontal range (R) = 36 m, Height of crossbar (h) = 3.05 m.
(a) The maximum height (H) attained by the projectile is given by, H = u²sin²θ/2g
Putting the given values, we get,H = (20 m/s)²(sin²53°)/(2×9.8 m/s²)H = 19.122 m.
The ball will clear the crossbar only if it is less than or equal to the maximum height.
Let's calculate that distance.
Distance travelled by the projectile in the vertical direction (h) = H - 3.05
Distance travelled by the projectile in the vertical direction (h) = 19.122 - 3.05 = 16.072 m
Therefore, the ball clears the crossbar by 0.889 m.
(b) The ball approaches the crossbar when it returns to the same height where it was kicked. i.e., 0.
So, let's calculate the height at that instant.t = ?
projectile
Therefore, at this instant, the ball is falling down to the ground.
Hence, the ball approaches the crossbar while falling.
Learn more about projectile here ;
https://brainly.com/question/28043302
#SPJ11
An 1800 kg truck is moving straight West at a constant speed of 20 m/s. What is the momentum of the truck and the net force necessary to keep it moving? Define East as the positive direction. the truck's momentum is −36000 kg m/s and requires no net force to keep it moving the truck's momentum is +36000 kg m/s and requires 36000 N of net force to keep it moving the truck's momentum is −36000 kg m/s and requires 9.8 N of net force to keep it moving the truck's momentum is +36000 kg m/s and requires no net force to keep it moving the truck's momentum is −36000 kg m/s and requires 36000 N of net force to keep it moving
The truck's momentum is -36,000 kg m/s and requires no net force to keep it moving.
The momentum of an 1800 kg truck moving straight west at a constant speed of 20 m/s is calculated using the formula; momentum = mass x velocity
Since the truck is moving towards the west, its velocity is negative.
Thus, the momentum of the truck is: momentum = 1800 kg x (-20 m/s) = -36,000 kg m/s
Therefore, the momentum of the truck is -36,000 kg m/s.
To keep the truck moving straight west at a constant speed, no net force is required since it is moving at a constant velocity.
According to Newton's first law, an object in motion will remain in motion at a constant velocity unless acted upon by an unbalanced force.
Thus, the truck's momentum is -36,000 kg m/s and requires no net force to keep it moving.
Therefore, the correct option is: The truck's momentum is -36,000 kg m/s and requires no net force to keep it moving.
For more questions on momentum
https://brainly.com/question/1042017
#SPJ8
In the figure shown above, a butterfly net is in a uniform electric field of magnitude E = 170 N/C. The rim, a circle of radius a = 17.9 cm, is aligned perpendicular to the field. Find the electric flux through the netting. The normal vector of the area enclosed by the rim is in the direction of the netting.
The electric flux through the netting is approximately 0.0322 N·m²/C.
The electric flux through the netting, denoted as Φ, can be calculated using the formula Φ = E * A * cos(θ), where E represents the magnitude of the electric field, A denotes the area of the surface, and θ is the angle between the electric field and the surface normal.
Given the information that the electric field magnitude is E = 170 N/C and the netting forms a circular rim with a radius of a = 17.9 cm (0.179 m), we can determine the area A using A = π * (radius)^2. Thus, A ≈ 0.1007 m².
Since the normal vector of the rim aligns with the direction of the netting, the angle θ between the electric field and the surface normal is 0 degrees, leading to cos(0) = 1.
Substituting the values into the formula Φ = 170 N/C * 0.1007 m² * 1, we find that the electric flux through the netting is approximately 0.0322 N·m²/C.
To know more about electric field: https://brainly.com/question/19878202
#SPJ11
Define X-ray quality and give the unit used to measure X-ray quality.
X-ray quality is the measurement of how well an X-ray image portrays the object it is intended to represent.
It is an assessment of the image's diagnostic value, which is influenced by factors such as exposure, contrast, and resolution. In other words, it's the level of detail in the image and the degree to which it accurately represents the object being imaged.The unit of measurement for X-ray quality is kilovolt peak (kVp), which is a measure of the electrical potential used to generate the X-ray beam.
kVp affects the energy and penetrability of the X-ray beam, and therefore influences the quality of the resulting image. Higher kVp settings result in greater penetration through the object being imaged, but may reduce image contrast and resolution. Lower kVp settings can produce sharper and more detailed images, but may not penetrate the object sufficiently for diagnostic purposes.
Therefore, it's important to balance kVp settings with other factors such as exposure time and image processing to achieve optimal X-ray quality for a given imaging task. The ultimate goal is to produce an image that provides the necessary diagnostic information with minimal radiation exposure to the patient.
To know more about intended visit:
https://brainly.com/question/32666871
#SPJ11
A gun with a muzzle velocity of 1260ft/sec is fired at an angle of 13
∘
above the horizontal. Find the horizontal and vertical components of the velocity. The horizontal component of the velocity is ft/sec. (Round to the nearest integer.)
According to the question the horizontal component of the velocity is approximately 1233 ft/sec.
Given:
Muzzle velocity of the gun (V) = 1260 ft/sec
Angle above the horizontal (θ) = 13°
To find the horizontal [tex](Vx)[/tex] and vertical [tex](Vy)[/tex] components of the velocity, we can use trigonometric functions.
The horizontal component of velocity [tex](Vx)[/tex] can be found using the cosine function:
[tex]\[ Vx = V \cdot \cos(\theta) \][/tex]
Substituting the given values:
[tex]\[ Vx = 1260 \cdot \cos(13^\circ) \][/tex]
Now, let's calculate the horizontal component of velocity [tex](Vx):[/tex]
[tex]\[ Vx = 1260 \cdot \cos(13^\circ) \][/tex]
Next, we can calculate the vertical component of velocity [tex](Vy)[/tex] using the sine function:
[tex]\[ Vy = V \cdot \sin(\theta) \][/tex]
Substituting the given values:
[tex]\[ Vy = 1260 \cdot \sin(13^\circ) \][/tex]
Now, let's calculate the vertical component of velocity [tex](Vy):[/tex]
[tex]\[ Vy = 1260 \cdot \sin(13^\circ) \][/tex]
To round the values to the nearest integer, we can use the "round" function. Let's denote the rounded horizontal component of velocity as [tex]\( Vx' \)[/tex] and the rounded vertical component of velocity as [tex]\( Vy' \).[/tex]
[tex]\[ Vx' = \text{{round}}(Vx) \][/tex]
[tex]\[ Vy' = \text{{round}}(Vy) \][/tex]
Now, let's calculate the values:
[tex]\[ Vx = 1260 \cdot \cos(13^\circ) \approx 1233 \, \text{{ft/sec}} \][/tex]
[tex]\[ Vy = 1260 \cdot \sin(13^\circ) \approx 287 \, \text{{ft/sec}} \][/tex]
Therefore, the horizontal component of the velocity is approximately 1233 ft/sec.
Learn more about velocity
brainly.com/question/30426174
#SPJ11
2) A mass/spring system has a damping rate of r=0.05 kg/s. If the initial displacement of the spring is 10 cm and initial velocity is 0 , the spring constant is 5 N/m and the mass is 1 kg. find: a) The position of the mass as a function of time after the motion starts. (20) b) The energy lost to damping after 10 oscillation periods. (10)
The energy lost to damping after 10 oscillation periods is: E = 1.5 J. The angular frequency ω can be calculated as ω = sqrt(k/m), and the damping rate (r) is given as 0.05 kg/s.
The position of the mass as a function of time after the motion starts is:
The energy lost to damping after 10 oscillation periods is: E = 1.5 J
The position of the mass as a function of time can be determined by using the equation for a damped harmonic oscillator. The damping rate is r = 0.05 kg/s, the spring constant is k = 5 N/m, and the mass is m = 1 kg.
The energy lost to damping after 10 oscillation periods can be determined by using the following equation:
where:
E is the energy lost to damping
m is the mass
ω is the angular frequency of the oscillator
r is the damping rate
T is the period of the oscillator
Substituting the known values into the equation, we get:
In this case, the initial displacement (A) is 10 cm (0.1 m), the initial velocity is 0, the spring constant (k) is 5 N/m, and the mass (m) is 1 kg. The angular frequency ω can be calculated as ω = sqrt(k/m), and the damping rate (r) is given as 0.05 kg/s.
The position of the mass as a function of time oscillates with a decreasing amplitude. The energy lost to damping is the energy that is transferred from the oscillating mass to the damping mechanism.
To learn more about oscillation click here
brainly.com/question/13112321
#SPJ11
) Four dipoles, each consisting of a +10−10 C charge and a −10−1C charge, are located in the xv−plane with their centers 1.0 mm from the ongin. as shown. A sphene passes through the dipoles, as shown in the figure. What is the cloctric flux through the sphcre due to these dipoles? (Aा =8.85×10
−12
C
2
N⋅m
2
) A) 4.5×106 N⋅m
2
/C B) 0.00 N⋅m
2
C C) 90×106 N⋅m
2
/C D) 11×10
5
N⋅m
2
/C
The electric flux through the sphere is zero due to net dipole moment of given dipoles and zero net charge on the sphere. Option (B) is correct answer.
Four dipoles, each consisting of a +10−10 C charge and a −10−1C charge, are located in the xv-plane with their centers 1.0 mm from the origin. The net dipole moment of the given dipoles can be calculated as:
The net dipole moment of the given dipoles is 8.0 x 10^-24 C m.
As the net charge on the sphere is zero, the electric flux through the sphere due to these dipoles is zero. Hence, option (B) 0.00 Nm2/C is the correct answer.
Learn more about dipole moment:
https://brainly.com/question/14058533
#SPJ11
A baseball player friend of yours wants to determine his pitching speed. You have him stand on a ledge and throw the ball horizontally from an elevation 5.0 m above the ground. The ball lands 25 m away. Part A What is his pitching speed? Express your answer with the appropriate units.
The pitching speed of the Baseball player is approximately 17.48 m/s.
To determine the pitching speed, we can use the principle of projectile motion. Since the ball is thrown horizontally, the initial vertical velocity is 0 m/s. The only force acting on the ball is gravity, causing it to fall vertically.
The horizontal distance traveled by the ball is 25 m, and the vertical distance (height) is 5.0 m. We can use the kinematic equation:
d = v₀t
Where:
d is the horizontal distance (25 m),
v₀ is the initial horizontal velocity (pitching speed),
and t is the time of flight.
Since the initial vertical velocity is 0 m/s, the time of flight can be found using the vertical motion equation:
d = (1/2)gt²
Where g is the acceleration due to gravity (approximately 9.8 m/s²).
Substituting the values:
5.0 m = (1/2)(9.8 m/s²)t²
Solving for t:
t = √(2 * 5.0 m / 9.8 m/s²)
t ≈ 1.43 s
Now, we can find the pitching speed (v₀) using the horizontal distance and time of flight:
v₀ = d / t
v₀ = 25 m / 1.43 s
v₀ ≈ 17.48 m/s.
To know more about principle of projectile motion
brainly.com/question/29545516
#SPJ11
a) A 1000 kg and 1450 kg moving at speed 190 m/s and 220 m/s collide head on. The collision causes the masses to fuse and break into two masses each with mass 1250 kg and 1200 kg. The 1200 kg mass moves at speed 130 m/s with angle 33° from the original path of the 1000 kg mass. Determine i. velocity of the 1250 kg mass ii. the change in kinetic energy before and after the collision
The velocity of the 1250 kg mass after the collision is 160.148 m/s and the change in kinetic energy before and after the collision is 2.655 × 10⁷ J.
A 1000 kg mass and 1450 kg moving at speed 190 m/s and 220 m/s collide head-on. The collision causes the masses to fuse and break into two masses, each with a mass of 1250 kg and 1200 kg. The 1200 kg mass moves at speed 130 m/s with angle 33° from the original path of the 1000 kg mass.
i. Velocity of the 1250 kg mass
The momentum before the collision is given as:1000 × 190 + 1450 × 220 = 345500 kg m/s
Momentum after the collision = 1250v1 + 1200v2At the angle of 33°, the horizontal velocity of the 1200 kg mass is given as: v = usinθ, where u = 130 and θ = 33°.
∴ v2 = 130sin33° = 70.38 m/s. The horizontal momentum after the collision can be given as: 1250v1 + 1200v2 = (1250 + 1200)u
Total momentum = 345500 kg m/s, thus:345500 = 2450uv1 = (345500 - 144360)/1250 = 160.148 m/s
The velocity of the 1250 kg mass after the collision is 160.148 m/s and that of the 1200 kg mass is 70.38 m/s.
ii. The change in kinetic energy before and after the collision
The kinetic energy before the collision = (1/2) × 1000 × (190)² + (1/2) × 1450 × (220)² = 8.34 × 10⁷ J
The kinetic energy after the collision = (1/2) × 1250 × (160.148)² + (1/2) × 1200 × (70.38)² = 5.685 × 10⁷ J
Change in kinetic energy = Initial kinetic energy - Final kinetic energy= 8.34 × 10⁷ J - 5.685 × 10⁷ J = 2.655 × 10⁷ J.
Learn more about kinetic energy
https://brainly.com/question/999862
#SPJ11
In class, we saw that the relationship between for the semi-major axis a (in AU), period P (in years), and masses M
1
and M
2
(in solar masses) for the orbit of two objects is a
3
=(M
1
+M
2
)×P
2
which we call "Newton's version of Kepler's third law". For the Earth-Sun system, we can write a
3
=(M
Sun
+M
Earth
)×P
2
Since the Earth is much less massive than the sun, with M
Earth
≈10
−6
M
Sun
we can ignore the mass of the Earth in the above expression. a) (0.5pts) Justify, in words, why we can do this, and write what the resulting relationship will be. b) (0.5 pts) Using a=1.00000011AU for the semi-major axis of the Earth-Sun orbit, what is the value of P that you obtain from your expression? Does this value make sense? Now let's say that Earth was replaced by a more massive planet, let's call it Superearth, with M
Superearth
=10
−1
M
sun
. Assume that the Superearth-Sun orbit has the same semi-major axis a of 1.0AU. c) (0.5pts) What expression should we use to find the orbital period P of the Superearth-Sun system? Should we ignore the mass of Superearth?
The resulting relationship will be [tex]a^3 = M_{Sun} * P^2[/tex]. The value of P that we obtain from the expression is approximately 365.25 days, which makes sense because the Earth orbits the Sun once every 365.25 days. The expression we should use to find the orbital period P is [tex]a^3 = (M_{Sun} + M_{Superearth}) * P^2[/tex].
a) We can ignore the mass of the Earth in the expression for the Earth-Sun system because the Earth's mass is much smaller than the Sun's. Ignoring the mass of the Earth simplifies the equation and allows us to focus on the dominant mass, which is the Sun. The resulting relationship will be [tex]a^3 = M_{Sun} * P^2[/tex]where a is the semi-major axis in AU, [tex]M_{Sun[/tex] is the mass of the Sun in solar masses, and P is the period in years.
b) Using a = 1.00000011 AU for the semi-major axis of the Earth-Sun orbit, we can plug it into the simplified expression [tex]a^3 = M_{Sun} * P^2[/tex]. Solving for P, we have
P = [tex]\sqrt{(a^3 / M_{Sun)[/tex].
Plugging in the values,
P = [tex]\sqrt{((1.00000011 AU)^3 / 1 M_{Sun),[/tex]
which gives us P = 1 year.
This value makes sense because it corresponds to the Earth's orbital period around the Sun, which is approximately 1 year.
c) To find the orbital period P of the Superearth-Sun system, we need to consider the mass of Superearth. The expression we should use is
[tex]a^3 = (M_{Sun} + M_{Superearth}) * P^2[/tex], where a is the semi-major axis in AU, [tex]M_{Sun[/tex] is the mass of the Sun in solar masses, [tex]M_{Superearth[/tex] is the mass of Superearth in solar masses, and P is the period in years. We should not ignore the mass of Superearth because it is significant compared to the mass of the Sun.
Learn more about Earth-Sun orbit
https://brainly.com/question/30663692
#SPJ11
How far, in meters, from the starter cable of a car, carrying 150 A, must you be to experience a field less than the Earth’s 5 * 10^-5 T? Assume a long straight wire carries the current. (In practice, the body of your car shields the dashboard compass.)
The minimum distance from the starter cable of a car carrying 150 A is 6 meters for the field to be less than the Earth’s 5 × 10⁻⁵ T.
A current-carrying long straight wire produces a magnetic field. The magnetic field intensity varies as the inverse of the distance from the wire squared and is proportional to the current flowing in the wire.
To calculate the magnetic field intensity produced by the current-carrying wire, we use the formula:
[tex]$$B=\frac{μ_0I}{2πr}$$[/tex]
Where,μ0= 4π × 10⁻⁷ TmA⁻¹
I = 150 A
The minimum distance from the starter cable of a car carrying 150 A to experience a field less than the Earth’s 5 × 10⁻⁵T is:
[tex]$$5 \times 10^{-5} = \frac{4\pi × 10^{-7} × 150}{2πr}$$[/tex]
[tex]$$r = \frac{4\pi × 10^{-7} × 150}{2 × π × 5 × 10^{-5}}$$[/tex]
r = 6 meters
Therefore, the minimum distance required from the starter cable of a car carrying 150 A is 6 meters for the field to be less than the Earth’s 5 × 10⁻⁵ T.
The minimum distance required from the starter cable of a car carrying 150 A to experience a field less than the Earth’s 5×10⁻⁵ T is 6 meters.
To know more about magnetic field, visit:
https://brainly.com/question/14848188
#SPJ11
In the circuit shown, the AC voltage source supplies an rms voltage of 160 V at frequency f. The circuit has R = 103 W, XL = 183 W, and XC = 99 W.
(a) Find the impedence of the circuit.
Z = W *
132.91 OK
(b) Find the rms current flowing in the circuit.
Irms = A *
1.204 OK
(c) Find the phase angle in degrees between the current in the circuit and the voltage supplied by the AC source.
f = degrees
(d) At the instant the voltage across the generator is at its maximum value, what is the magnitude of the current in the circuit?.
I = A
The impedance of the circuit is 132.91 Ω. The RMS current flowing in the circuit is 1.204 A. The phase angle between the current and voltage is 38.7°. At the instant the voltage across the generator is at its maximum value, the magnitude of the current in the circuit is 1.704 A.
(a) Impedance Calculation:
The impedance of the circuit is determined using the formula: Z = sqrt(R² + (Xl - Xc)²), where R is the resistance of the circuit, Xl is the inductive reactance, and Xc is the capacitive reactance. In this case, the given values are R = 103 Ω, Xl = 183 Ω, and Xc = 99 Ω.
Z = sqrt(103² + (183 - 99)²)
Z = sqrt(10609 + 3024)
Z = sqrt(13633)
Z ≈ 132.91 Ω
Therefore, the impedance of the circuit is approximately 132.91 Ω.
(b) RMS Current Calculation:
The RMS current in the circuit is calculated using the formula: Irms = Vrms / Z, where Vrms is the RMS voltage of the AC source. Given that Vrms = 160 V and Z = 132.91 Ω (calculated in part (a)), we can substitute these values into the formula:
Irms = 160 V / 132.91 Ω
Irms ≈ 1.204 A
So, the RMS current flowing in the circuit is approximately 1.204 A.
(c) Phase Angle Calculation:
The phase angle (f) between the current and voltage is determined using the formula: f = tan⁻¹((Xl - Xc) / R), where Xl is the inductive reactance, Xc is the capacitive reactance, and R is the resistance of the circuit.
f = tan⁻¹((183 - 99) / 103)
f = tan⁻¹(84 / 103)
f ≈ 38.7°
Therefore, the phase angle between the current and voltage is approximately 38.7°.
(d) Maximum Current Calculation:
At the instant when the voltage across the generator is at its maximum value, the current in the circuit will be equal to the maximum current (Imax). The maximum current in an AC circuit is equal to the amplitude of the sinusoidal waveform, which can be calculated as Iamp = Imax * sqrt(2). Given that the RMS current (Irms) is 1.204 A (calculated in part (b)), we can find the maximum current:
Iamp = 1.204 A * sqrt(2)
Iamp ≈ 1.704 A
Therefore, the magnitude of the current in the circuit when the voltage across the generator is at its maximum value is approximately 1.704 A.
Learn more about magnitude at: https://brainly.com/question/30337362
#SPJ11
The electric potential in a volume of space is given by V(x,y,z)=x
2
+xy
2
+yz Determine the electric field in this region at the coordinate (−9,9,−1). be in units of V/m. In other words: only enter the numbers, but no units. ).
The electric field at the coordinate (-9, 9, -1) in this region is determined to be 63i - 163j + 9k V/m.
To find the electric field at the coordinate (-9, 9, -1) in the given region, we can use the gradient of the electric potential function V(x, y, z) = x² + xy² + yz.
The gradient of V is given by:
∇V = (∂V/∂x)i + (∂V/∂y)j + (∂V/∂z)k
Taking the partial derivatives:
∂V/∂x = 2x + y²
∂V/∂y = 2xy + z
∂V/∂z = y
Substituting the coordinates (-9, 9, -1):
∂V/∂x = 2(-9) + (9)² = -18 + 81 = 63
∂V/∂y = 2(-9)(9) + (-1) = -162 - 1 = -163
∂V/∂z = 9
Therefore, the electric field at the coordinate (-9, 9, -1) is given by E = 63i - 163j + 9k V/m.
Learn more about electric potential: https://brainly.com/question/14306881
#SPJ11
A proton that initially is traveling at a speed of 510 m/s enters a region where there is an electric field. Under the influence of the electric field the proton slows down and comes to a stop. What is the change in kinetic energy of the proton? K=
The change in kinetic energy of the proton is 4.28 × 10⁻¹⁵ J as it slows down and comes to a stop under the influence of the electric field.
A proton that initially is traveling at a speed of 510 m/s enters a region where there is an electric field. Under the influence of the electric field, the proton slows down and comes to a stop. The change in kinetic energy of the proton is calculated as follows:
K = KE₁ - KE₂
Where KE₁ is the initial kinetic energy of the proton and KE₂ is the final kinetic energy of the proton.
Kinetic energy of a particle is given by the expression:
KE = (1/2)mv²
where m is the mass of the particle and v is its velocity.
The mass of a proton is 1.67 × 10⁻²⁷ kg.
Using the expression for kinetic energy:
KE₁ = (1/2)mv₁²
where v₁ is the initial velocity of the proton.
Kinetic energy of the proton before it enters the electric field is:
KE₁ = (1/2)(1.67 × 10⁻²⁷)(510)²= 4.28 × 10⁻¹⁵ J
When the proton comes to a stop, its final velocity is zero, and hence its final kinetic energy is zero. Therefore,
KE₂ = 0J
Thus, the change in kinetic energy of the proton is:
K = KE₁ - KE₂= 4.28 × 10⁻¹⁵ J - 0 J= 4.28 × 10⁻¹⁵ J
Therefore, the change in kinetic energy of the proton is 4.28 × 10⁻¹⁵ J.
Learn more about kinetic energy: https://brainly.com/question/8101588
#SPJ11
A pulsar is a rapidly rotating neutron star. The Crab nebula pulsar in the constellation Taurus has a period of 33.5 *10^-3 s, radius10 km. And suppose its mass is 2.6*10^30 kg.The pulsar's rotational period will increase over time due to the release of electromagnetic radiation ,which doesn't change,which doesn't change radiation but reduces its rotational energy a) What is the angular momentum of the pulsar?Give your answer in the scientific notation ,in the normalized form, L =________ *10_______JS. b) Suppose the angular velocity decrease at a rate of 1.2 *10^-14 rad/s^2.What is the magnitude of the torque on the pulsar?Give your answer in the scientific notation,in the normalized form.T^net=______*10___________Nm
The angular momentum of the pulsar is L = 1.08 × 10⁴⁰ JS. b)The torque acting on the pulsar is 2.48 × 10²⁰ Nm.
Given data:
Pulsar period (T) = 33.5 × 10⁻³ s
Pulsar radius (R) = 10 km
Mass of pulsar (M) = 2.6 × 10³⁰ kg
Formula for angular momentum:
L = Iω
where,
I = moment of inertia
ω = angular velocity
The moment of inertia for a solid sphere is given by,
I = (2/5) M R²
The angular momentum of the pulsar is,
L = Iω
= [(2/5) M R²]
ω= [(2/5) × 2.6 × 10³⁰ kg × (10 × 10⁴ m)²] × (2π / T)
= 1.08 × 10⁴⁰ kg m²/s
The angular momentum of the pulsar is L = 1.08 × 10⁴⁰ JS
a) The angular momentum of the pulsar is L = 1.08 × 10⁴⁰ JS.
b)The torque acting on the pulsar is given by,
Tnet = Iα= I(dω / dt)
= [(2/5) M R²] (dω / dt)
= [(2/5) × 2.6 × 10³⁰ kg × (10 × 10⁴ m)²] (1.2 × 10⁻¹⁴ rad/s²)
= 2.48 × 10²⁰ Nm
The angular momentum of the pulsar is L = 1.08 × 10⁴⁰ JS.
b)The torque acting on the pulsar is 2.48 × 10²⁰ Nm.
To know more about angular momentum, visit:
https://brainly.com/question/30656024
#SPJ11
x-ray photons of wavelength 0.01575 nm interact by the Compton ellect with free electron at rest. APter The interaction, photons of wavelength 0,01772 nm are ubuervod To be scatered at a certain angle. a) ReloTive To The difection of the original x-rays, at what angle would we observe these photons? b) what is the kinetic energy given to the electrons by the interaction with These photons?
a) The angle of scattering (θ) is approximately equal to the inverse cosine of 1 minus the product of the change in wavelength and the electron's properties divided by Planck's constant.
b) The kinetic energy given to the electrons is approximately equal to the rest energy of the electron minus the rest energy multiplied by the cosine of the scattering angle (θ).
a) To determine the angle of scattering, we can use the Compton scattering formula:
λ' - λ = [tex](h / (m_e * c))[/tex] * (1 - cos(θ))
where λ' is the wavelength of the scattered photon, λ is the wavelength of the incident photon, h is Planck's constant, m_e is the mass of the electron, c is the speed of light, and θ is the scattering angle.
Plugging in the given values:
λ' = 0.01772 nm
λ = 0.01575 nm
We can rearrange the formula to solve for θ:
cos(θ) = 1 - ((λ - λ') * [tex](m_e * c) / h)[/tex]
θ = arccos(1 - ((λ - λ') [tex]* (m_e * c) / h))[/tex]
Calculating the angle:
θ ≈ [tex]arccos(1 - ((0.01575 - 0.01772) * (9.11 * 10^(-31) kg * 3 * 10^8 m/s) / (6.626 * 10^(-34) Js)))[/tex]
b) The kinetic energy given to the electrons by the interaction with these photons can be determined using the conservation of energy. The change in energy (ΔE) of the photon is equal to the kinetic energy gained by the electron.
ΔE = hf =[tex](m_e * c^2) - (m_e * c^2) * cos(θ)[/tex]
Solving for the kinetic energy:
Kinetic energy = ΔE =[tex](m_e * c^2) - (m_e * c^2) * cos(θ)[/tex]
Substituting the calculated value of θ into the equation and plugging in the known values:
Kinetic energy ≈ [tex](9.11 * 10^(-31) kg * (3 * 10^8 m/s)^2) - (9.11 * 10^(-31) kg * (3 * 10^8 m/s)^2) * cos(θ)[/tex]
Learn more about scattering angle here
https://brainly.com/question/14689838
#SPJ11
Calculate the de Broglie wavelength for an electron that has a speed of 5.8.106 m/s.
Please consider a detailed solution and a good handwriting
Thanks in advance!
The de Broglie wavelength of an electron traveling at a speed of 5.8 x 10^6 m/s is approximately 1.33 x 10^-10 m.
The de Broglie wavelength, denoted by λ, can be calculated using the equation: λ = h / p
where h is Planck's constant (h = 6.626 x 10^-34 J·s) and p is the momentum of the particle. The momentum of an electron can be calculated using the equation:
p = m * v
where m is the mass of the electron (m = 9.11 x 10^-31 kg) and v is its velocity.
Substituting the given values into the equation, we have:
p = (9.11 x 10^-31 kg) * (5.8 x 10^6 m/s)
≈ 5.28 x 10^-24 kg·m/s
Now, we can calculate the de Broglie wavelength:
λ = (6.626 x 10^-34 J·s) / (5.28 x 10^-24 kg·m/s)
≈ 1.33 x 10^-10 m
Therefore, the de Broglie wavelength of the electron with a speed of 5.8 x 10^6 m/s is approximately 1.33 x 10^-10 m.
To learn more about wavelength, click here:
brainly.com/question/32900586
#SPJ11
Consider the vertical wall of a house. The wall is made up of an outer polyurethane plate (k = 0.023 W/mK) of 5 cm. thick and a brick plate (k = 0.72 W/mK), 20 cm. of thickness. room temperature, both inside and outside the house is equal to 25 C. Similarly, the heat transfer coefficient is equal to h = 10 W/m2K on both sides of the wall. On the other hand, the outside of the wall is exposed to a net heat flux by solar radiation equal to 500 W/m2.
(a) Calculate the temperature at the outer surface of the wall.
(b) Determine the heat transferred by the wall to the interior of the house, in W/m2.
(c) Calculate the temperature at the inner surface of the wall.
The temperature at the outer surface of the wall is -1.3°C, the heat transferred by the wall to the interior of the house is 579 W/m² and the temperature at the inner surface of the wall is 20.46°C.
Temperature at outer surface of wall
In order to calculate the temperature at the outer surface of the wall, we have to use the following formula which is given below:
q conv = h x A x (T surf − T inf)
q rad = α solar × A
q cond = k x A x (T surf − T_inf) / d
We have to first calculate q_conv then q_rad and then q_cond to find out T_surf
q conv = h x A x (T surf − T inf)
= 10 × (20 × 0.05 + 20 × 0.20) × (T surf − 25)
= 23T surf − 575
q rad = α_solar × A
= 500 × (20 × 0.05 + 20 × 0.20)
= 5000
q cond = k x A x (T surf − T_inf) / d
= 0.72 × (20 × 0.05) × (T_surf − 25) / 0.2
= 0.09 (T_surf − 25)
Equating the sum of all heat transfer equations to zero
q_conv + q_rad + q_cond = 0
23T_surf − 575 + 5000 + 0.09(T_surf − 25) = 0
23T_surf + 0.09T_surf = 5675
T_surf = (5675 / 23.09) + 25 = 271.9 K = -1.3°C
So, the temperature at the outer surface of the wall is -1.3°C.
Heat transferred by the wall to the interior of the house
For calculating the heat transferred by the wall to the interior of the house, we have to use the following formula:
q_conv = h x A x (T_surf − T_inf)
= 10 × (20 × 0.05 + 20 × 0.20) × (25 − (-1.3))
= 579 W/m²
Therefore, the heat transferred by the wall to the interior of the house is 579 W/m².
Temperature at the inner surface of the wall
For calculating the temperature at the inner surface of the wall, we have to use the following formula:
q_conv = h x A x (T_surf − T_inf)
q_conv = q_dot × t
q_dot = (T_surf − T_inner_surf) / R_total
1 / R_total = 1 / R_cond + 1 / R_conv1 + 1 / R_conv2
R_cond = d / (k × A)
R_conv1 = 1 / (h × A)
R_conv2 = 1 / (h × A)
= 20.46 °C
So, the temperature at the inner surface of the wall is 20.46°C
Therefore, the temperature at the outer surface of the wall is -1.3°C, the heat transferred by the wall to the interior of the house is 579 W/m² and the temperature at the inner surface of the wall is 20.46°C.
To know more about temperature visit:
brainly.com/question/7510619
#SPJ11
An air-gap parallel plate capacitor of capacitance C0=20nF is connected to a battery with voltage V=12 V. While the capacitor remains connected to the battery, we insert a dielectric (κ=2.6) into the gap of the capacitor, filling one half of the volume as shown below. What is Qfinal , the charge on the capacitor in the final situation? Qfinal =∣6.24e−7NO
The final charge on the capacitor is approximately 6.24 × 10^(-7) C. Initially, the capacitor has a capacitance of 20 nF, which increases to 52 nF when a dielectric with a dielectric constant of 2.6 is inserted.
The charge on the capacitor in the final situation, Qfinal, is approximately 6.24 × 10^(-7) C. This can be determined by using the equation Q = CV, where Q is the charge, C is the capacitance, and V is the voltage.
Initially, the capacitance of the capacitor is C0 = 20 nF. When the dielectric with a dielectric constant κ = 2.6 is inserted, the capacitance increases by a factor of κ. Therefore, the final capacitance is Cfinal = κC0 = 2.6 × 20 nF = 52 nF.
Since the voltage across the capacitor remains constant at V = 12 V, we can use the equation Qfinal = CfinalV to calculate the final charge. Substituting the values, we have Qfinal = (52 nF)(12 V) = 624 nC.
Converting the charge to the appropriate units, we find Qfinal ≈ 6.24 × 10^(-7) C, where "C" represents Coulombs.
To know more about capacitor ,
https://brainly.com/question/31969363
#SPJ11
There are two identical, positively charged conducting spheres fixed in space. The spheres are 31.6 cm apart (center to center) and repel each other with an electrostatic force of F
1
=0.0645 N. A thin conducting wire connects the spheres, redistributing the charge on each sphere. When the wire is removed, the spheres still repel, but with a force of F
2
=0.100 N. The Coulomb force constant is k=1/(4πe
0
)=8.99×10
9
N⋅m
2
/C
2
. Using this information, find the initial charge on each sphere, q
1
and q
2
, if q
1
is initially less than q
2
.
The initial charge on sphere 1, q1 = 1.74 × 10^-8 C, and the initial charge on sphere 2, q2 = 1.16 × 10^-8 C, as calculated using the coulomb's force.
The initial charge on each sphere, q1 and q2, when there are two identical, positively charged conducting spheres fixed in space and repel each other with an electrostatic force of F1 = 0.0645 N and F2 = 0.100 N and a thin conducting wire connects the spheres, redistributing the charge on each sphere is given by the Coulomb's force. Force of the initial charge on each sphere, F1 = 0.0645 N
The Coulomb force constant, k = 1/(4πε0) = 8.99×109 N⋅m2/C2We know that force is directly proportional to charge and inverse proportional to the square of distance, Charge is given by F = k * q1 * q2 / r2where,k is the Coulomb force constantq1 and q2 are the charges of the two particles r is the distance between the two particles. Force of the final charge on each sphere, F2 = 0.100 N. The distance between the two spheres, r = 31.6 cm = 0.316 m
Therefore, initially,F1 = k * q1 * q2 / r2 0.0645 = 8.99 * 10^9 * q1 * q2 / (0.316)^2 .........................(1)When the wire is removed, the spheres still repel each other with a force of F2 = 0.100 Nq1 = x and q2 = yNow, F2 = k * q1 * q2 / r2 0.100 = 8.99 * 10^9 * x * y / (0.316)^2 0.100 = 8.99 * 10^9 * q1 * q2 / (0.316)^2 .........................(2)Dividing equation (2) by equation (1), we get;0.100 / 0.0645 = q1 / q2(3/2) = q1 / q2q1 = (3/2)q2 ......................................(3)Putting equation (3) in equation (1),0.0645 = 8.99 * 10^9 * (3/2)q2^2 / (0.316)^2q2^2 = (0.0645 * (0.316)^2 * 2) / (8.99 * 10^9 * 3)q2 = 1.16 × 10^-8 Cq1 = (3/2)q2 = (3/2) × 1.16 × 10^-8 = 1.74 × 10^-8 C
Therefore, the initial charge on sphere 1, q1 = 1.74 × 10^-8 C, and the initial charge on sphere 2, q2 = 1.16 × 10^-8 C.
Learn more about coulomb's force:
https://brainly.com/question/14689293
#SPJ11
Describe the concept of skin depth when applied to a high frequency alternating current passing along a copper wire (which can be considered non-magnetic). [4 marks]
The Skin Effect refers to the phenomenon observed when a high-frequency alternating current (AC) flows through a copper wire, causing the current to concentrate more heavily near the wire's outer surface rather than its inner core. This effect results in a decrease in current strength as we move from the surface towards the center of the wire. The depth at which the current's strength is reduced by a factor of 1/e (approximately 37%) is known as the Skin Depth.
The skin depth depends on the frequency of the AC and the wire's conductivity, which is inversely related to the resistivity of the wire's material. The skin depth can be calculated using the equation:
δ = 1/√(πfμσ)
Where:
δ represents the skin depth in meters,
f represents the frequency of the AC,
σ represents the conductivity of the material in siemens/meter (S/m), and
μ represents the magnetic permeability (4π × 10⁻⁷ H/m for copper).
For example, when a 60 Hz AC passes through a copper wire, the skin depth is calculated to be 8.57 mm. As the frequency increases to 1000 Hz, the skin depth of copper reduces to 0.77 mm.
The concept of skin depth is crucial in the design of antennas and other electrical systems because it determines the distance to which the current can penetrate into a material before it is significantly attenuated. Therefore, it is important to select materials with high conductivity (low resistivity) when dealing with high-frequency currents to minimize the skin depth and reduce the resistance of the wire or material.
To know more about phenomenon visit:
https://brainly.com/question/6818732
#SPJ11
A man paddles a canoe in a long, straight section of a river. The canoe moves downstream with constant speed 3 m/srelative to the water. The river has a steady current of 1 m/s relative to the bank. The man's hat falls into the river. Four minutes later, he notices that his hat is missing and immediately turns the canoe around, paddling upriver with the same constant speed of 3 m/s relative to the water. How long does it take the man to row back upriver to reclaim his hat? min
It takes the man 1.067 minutes (or about 1 minute and 4 seconds) to row back upstream and reclaim his hat.
Consider the relative velocities involved.
Downstream velocity:
The canoe moves downstream with a speed of 3 m/s relative to the water.
River velocity:
The river has a steady current of 1 m/s relative to the bank.
find the net velocity of the canoe downstream, we add the velocities of the canoe and the river:
Net velocity downstream = Canoe velocity + River velocity
= 3 m/s + 1 m/s
= 4 m/s
the man's hat falls into the river and is carried downstream by the current, we can calculate the distance the hat travels in 4 minutes (or 4/60 hours):
Distance downstream = Net velocity downstream * Time
= 4 m/s * (4/60) h
= 16/60 m
= 4/15 m
When the man realizes his hat is missing, he immediately turns the canoe around and paddles upriver with the same constant speed of 3 m/s relative to the water. In this case, he is paddling against the current.
Net velocity upstream = Canoe velocity - River velocity
= 3 m/s - 1 m/s
= 2 m/s
To reclaim his hat, the man needs to travel back upstream a distance equal to the downstream distance his hat traveled.
Time taken to row back upstream = Distance upstream / Net velocity upstream
= (4/15) m / 2 m/s
= (4/15) / 2 s
= 8/30 s
= 4/15 s
Converting the time to minutes:
Time taken to row back upstream = (4/15) s * (60/1) min/s
= 16 min/15
≈ 1.067 min
To know more about upstream refer here
https://brainly.com/question/13461234#
#SPJ11
Axis 1 is the positive x-axis Axis 2 is the positive y-axis Axis 3 is the negative x-axis Axis 4 is the negative y-axis A force has magnitude 44.3 newtons in a direction that makes an angle of 33.6 degrees measured counterclockwise from Axis 4. Find the x-component of the force
The x-component of the force is -38.1 N.
The force that is exerted has a magnitude of 44.3 newtons, with a direction of 33.6 degrees counterclockwise from Axis 4.
The angle of 33.6 degrees counter clockwise from Axis 4 can be represented in relation to the x-axis as follows:
360 - 180 = 180 degrees, which is equivalent to the positive x-axis plus the negative y-axis.
180 degrees is exactly halfway through the circle, so we can use the negative y-axis instead of the positive x-axis.
Thus, the direction is towards Axis 3.
The x-component of the force can be found by using the following formula:
force x = force · cos θ
where force is the force applied and θ is the angle between the force and the x-axis.
Therefore, the x-component of the force is given by:
force x = 44.3 N · cos(180° - 33.6°)
force x = 44.3 N · cos 146.4°
force x = -38.1 N (rounded to one decimal place)
Therefore, the x-component of the force is -38.1 N.
Learn more about Force from the given link;
https://brainly.com/question/12785175
#SPJ11
