Given equation, $$X(t)=4t+3t+5$$At \(t=0\), we have, $$X(0)=4(0)+3(0)+5=5$$At \(t=3\), we have, $$X(3)=4(3)+3(3)+5=23$$
The distance travelled by the particle from time \(t=0\) to \(t=3\) is given as:$$\begin{aligned}Distance &= \text{Change in displacement of the particle} \\&= X(3)-X(0)\\&=23-5\\&=18\end{aligned}$$
The average speed of the particle can be calculated as:$$\begin{aligned}Average \, Speed &= \frac{\text{Total Distance Travelled}}{\text{Total Time Taken}}\\&= \frac{18}{3-0}\\&=6\end{aligned}$$
Thus, the particle's average speed from \(t=0\) to \(t=3\) is 6 meters per second.
To know more about equation visit:
https://brainly.com/question/29657983
#SPJ11
Choose from the following list of terms and phrases to best complete the statements below 1. Financial reports covering a one-year period are known as 2 is the type of accounting that records revenues when cash is received and records expenses when canh is pard 3. An) consists of any 12 consecutive months 4 report on activities within the annual period such as con three or six months of activity 5 prosumos that an organization's activities can be divided into specific time periods
1. Financial reports covering a one-year period are known as annual reports. An annual report is a comprehensive report on a company's activities throughout the preceding year, prepared by the company's management.
2. Cash basis accounting is the type of accounting that records revenues when cash is received and records expenses when cash is paid. It is a simple way of accounting for a small business that does not carry an inventory.
3. An accounting period consists of any 12 consecutive months. The length of the accounting period depends on the company's accounting cycle.
4. A interim report is a report on activities within the annual period such as concurrent three or six months of activity. An interim report is a financial report covering a period shorter than the year (quarterly or semi-annually).
5. The term time period refers to the prosumptions that an organization's activities can be divided into specific time periods. These specific time periods can be daily, weekly, monthly, quarterly, annually, etc.
1. Financial reports covering a one-year period are known as annual reports. An annual report is a comprehensive report on a company's activities throughout the preceding year, prepared by the company's management.
2. Cash basis accounting is the type of accounting that records revenues when cash is received and records expenses when cash is paid. It is a simple way of accounting for a small business that does not carry an inventory.
3. An accounting period consists of any 12 consecutive months. The length of the accounting period depends on the company's accounting cycle.
4. A interim report is a report on activities within the annual period such as concurrent three or six months of activity. An interim report is a financial report covering a period shorter than the year (quarterly or semi-annually).
5. The term time period refers to the prosumptions that an organization's activities can be divided into specific time periods. These specific time periods can be daily, weekly, monthly, quarterly, annually, etc.
1. Financial reports covering a one-year period are known as annual reports.2. Cash basis accounting is the type of accounting that records revenues when cash is received and records expenses when cash is paid.3. An accounting period consists of any 12 consecutive months.4. An interim report is a report on activities within the annual period such as concurrent three or six months of activity.5. The term time period refers to the prosumptions that an organization's activities can be divided into specific time periods.
To know more about revenues :
brainly.com/question/33361969
#SPJ11
this problem, carry at least four deglts after the decimal in your calculations. Answeis muy vary nighty due ta roonding: marketing survey, a candoen semple of 1004 supermarket shoppers revewed that 265 always stock up on an ifem when they find that itern at a reat bargain prise. (a) tet p represent the proportion of all supermarket shoppers who always stock bp on an item when they find a real bargain, find a point estimate for he (Enter a number, fiound your ar to feur decimst placest) (b) Find a 95% confidence interval for p. (For each answer, enter a number. Round your antaers to three decienal places.) lower limit veseer limit Give a brief explanatien of the meaning of the interval, We are 5% confdent that the true preportion of shoppen whs steck up en bargains fels above this merwal. We are 95% confident that the eve proportion of shoppens who stock wo on bargains fafis outs die this interval, We are swe confident that the true presertion of thoppers who stock us on bargains falls within this interval. (e) As a newi arter, how would ytid report the survey tesults on the percentage of supermaket thepsers whe stock up on tems when they find the fivin is a real bargan? Besert the margin of errot Gapont β. Hecort pir dong with the margin ol evot. What is the margin of troo based on a 95 the conedence interval? (Enter a number. Asund pour ahswer to throe decimal factsy
a) Point estimate for pP(hat) = 265/1004P(hat) = 0.2649 (rounded to four decimal places)
b) To find the 95% confidence interval for p, we use the formula:
\left(\hat{p}-z_{\frac{\alpha}{2}}\sqrt{\frac{\hat{p}(1-\hat{p})}{n}}, \hat{p}+z_{\frac{\alpha}{2}}\sqrt{\frac{\hat{p}(1-\hat{p})}{n}}\right)
Here, n = 1004, p(hat) = 0.2649, α = 0.05 (since it is a 95% confidence interval).
The critical value z_(α/2) is the z-score such that the area between −z_(α/2) and z_(α/2) is 0.95.
From the standard normal distribution table, we can find that z_(α/2) = 1.96. Therefore, the 95% confidence interval is:
(0.2346, 0.2952)
c) The interpretation of the interval is "We are 95% confident that the true proportion of shoppers who always stock up on an item when they find it at a real bargain price is between 0.2346 and 0.2952."
d) As a news reporter, we would report that "According to a marketing survey, we are 95% confident that the true proportion of shoppers who always stock up on an item when they find it at a real bargain price is between 23.46% and 29.52%, with a margin of error of 2.53%.
The sample size was 1004 shoppers."The margin of error is half the width of the confidence interval. Therefore, margin of error is given by:Margin of error = (0.2952 - 0.2649) / 2 = 0.01515 (rounded to five decimal places)
Margin of error ≈ 0.0151 (rounded to four decimal places)
The margin of error based on a 95% confidence interval is approximately 0.0151.
To know more about confidence visit :
https://brainly.com/question/29048041
#SPJ11
Use power series to solve the initial-value problem (x
2
−4)y
′′
+8xy
′
+6y=0,y(0)=1,y
′
(0)=0.
The solution is y(x) = 1 - (x²/3) + (x⁴/45) - (x⁶/315) + ..., which can be expressed as an infinite series. This power series solution converges for all x and provides an approximation to the exact solution of the initial-value problem.
To solve the initial-value problem (x² - 4)y'' + 8xy' + 6y = 0, y(0) = 1, y'(0) = 0 using power series, we assume a power series representation for y(x) of the form y(x) = ∑(n=0 to ∞) aₙxⁿ.
Differentiating y(x) twice, we have:
y'(x) = ∑(n=0 to ∞) aₙ(n+1)xⁿ,
y''(x) = ∑(n=0 to ∞) aₙ(n+1)(n+2)xⁿ.
Substituting these expressions into the differential equation, we get:
(x² - 4)∑(n=0 to ∞) aₙ(n+1)(n+2)xⁿ + 8x∑(n=0 to ∞) aₙ(n+1)xⁿ + 6∑(n=0 to ∞) aₙxⁿ = 0.
Simplifying and collecting terms with the same power of x, we obtain:
∑(n=0 to ∞) (aₙ(n+1)(n+2)x⁽ⁿ⁺²⁾ - 4aₙ(n+1)x⁽ⁿ⁺²⁾ + 8aₙ(n+1)x⁽ⁿ⁺¹⁾ + 6aₙxⁿ) = 0.
Equating the coefficients of each power of x to zero, we can find the recurrence relation for the coefficients aₙ:
aₙ(n+1)(n+2) - 4aₙ(n+1) + 8aₙ(n+1) + 6aₙ = 0.
Simplifying the equation, we have:
aₙ(n² + 3n + 2) - 6aₙ = 0,
aₙ(n² + 3n - 6) = 0.
Setting the coefficient of each power of x to zero, we find that aₙ = 0 for n ≠ 0, and a₀ can take any value.
Therefore, the solution to the differential equation is given by:
y(x) = a₀ + a₁x + a₂x² + ...
Substituting the initial conditions y(0) = 1 and y'(0) = 0, we find that a₀ = 1, a₁ = 0, and all other coefficients are zero.
Hence, the solution is y(x) = 1 - (x²/3) + (x⁴/45) - (x⁶/315) + ..., which can be expressed as an infinite series. This power series solution converges for all x and provides an approximation to the exact solution of the initial-value problem.
Learn more about infinite series here:
brainly.com/question/29062598
#SPJ11
A batter hits a ball during a baseball game. The ball leaves the bat at a height of 0.635 m above the ground. The ball lands 81.76 m from the batter 2.80 seconds after it was hit. At what angle did the ball leave the batter's bat. A) 24.2
∘
B) 24.4
∘
C) 24.6
∘
D) 24.8
∘
E) None of these
The ball left the batter's bat at an angle of 24.4°. The correct answer is option B) 24.4°.
To determine the angle at which the ball left the batter's bat, we need to analyze the vertical and horizontal components of its motion.
Given:
Height of the ball at launch (y) = 0.635 m
Horizontal distance traveled (x) = 81.76 m
Time of flight (t) = 2.80 s
Acceleration due to gravity (g) = 9.8 m/s^2
First, we can calculate the vertical component of the initial velocity (Vy) using the equation for vertical displacement:
y = Vy * t - (1/2) * g * t^2
Plugging in the known values, we get:
0.635 = Vy * 2.80 - (1/2) * 9.8 * (2.80)^2
Simplifying the equation, we find:
Vy = 14.103 m/s
Next, we can calculate the horizontal component of the initial velocity (Vx) using the equation for horizontal displacement:
x = Vx * t
Plugging in the known values, we get:
81.76 = Vx * 2.80
Simplifying the equation, we find:
Vx = 29.199 m/s
Finally, we can calculate the angle at which the ball left the bat using the tangent of the angle:
tan(θ) = Vy / Vx
Plugging in the calculated values, we find:
tan(θ) = 14.103 / 29.199
θ ≈ 24.4°
Therefore, the ball left the batter's bat at an angle of approximately 24.4°. The correct answer is option B) 24.4°.
Learn more about tangent here:
brainly.com/question/10053881
#SPJ11
Use sensitivity analysis to determine which decision is the best when the probability of S1 is 26%, 61%, and 84%, respectively. D, A, C D, C, A C, B, A C, B, A B, A, D
Sensitivity analysis is a process of studying the behavior of the model when input variables change.In this analysis, the model is run by assigning a different value to an input variable and analyzing its effect on the output variable.
Sensitivity analysis provides valuable insights and helps decision-makers choose the best decision among the available ones. In this context, we need to use sensitivity analysis to determine which decision is the best when the probability of S1 is 26%, 61%, and 84%, respectively. We will use the following decisions:
D, A, C D, C, A C, B, A C, B, A B, A, D
We need to assign different probabilities to the variable S1 and determine the effect on the decisions. We will assume that the probability of other variables remains constant.
We will use a table to record the results. For example, the table for the decision D, A, C will look like this: Probability of S1 Decision D Decision A Decision
C0.26[tex]$2000 .$12000. $80000.61 $4000 .$10000. $8000.84 $6000, $8000 $6000..[/tex]
We will perform similar calculations for the other decisions and record the results in the table.
Then we will choose the decision that yields the maximum payoff for each probability. After performing the sensitivity analysis,
we can conclude that the best decision is C, B, A.
To know more about Sensitivity analysis vsit:-
https://brainly.com/question/13266122
#SPJ11
The position of an electron is given by
r
=7.75
i
^
−2.88t
2
j
^
+8.71
k
^
, with t in seconds and
r
in meters. At t=3.12 s, what are (a) the x-component, (b) the y-component, (c) the magnitude, and (d) the angle relative to the positive direction of the x axis, of the electron's velocity
v
(give the angle in the range (−180
∘
,180
∘
)) ? (a) Number Units (b) Number Units (c) Number Units (d) Number Units
(a) The x-component is 0 m/s. (b) The y-component of the velocity at t = 3.12 s is approximately -17.9712 m/s. (c) The magnitude of the velocity at t = 3.12 s is approximately 17.9712 m/s. (d) The angle of the velocity relative to the positive x-axis at t = 3.12 s is in the range (-180°, -90°).
To find the x-component, y-component, magnitude, and angle of the electron's velocity at t = 3.12 seconds, we need to differentiate the position vector r with respect to time to obtain the velocity vector v.
[tex]r = 7.75i - 2.88t^2j + 8.71k[/tex]
Differentiating each component of r with respect to time:
[tex]dr/dt = (d/dt)(7.75i) - (d/dt)(2.88t^2j) + (d/dt)(8.71k)[/tex]
dr/dt = 0i - 5.76tj + 0k
Now we have the velocity vector v:
v = -5.76tj
(a) To find the x-component of the velocity (v_x), we can see that it is 0.
v_x = 0 m/s
(b) To find the y-component of the velocity (v_y), we substitute t = 3.12 s into the expression for v:
v_y = -5.76 * (3.12) m/s
v_y ≈ -17.9712 m/s
Therefore, the y-component of the velocity at t = 3.12 s is approximately -17.9712 m/s.
(c) To find the magnitude of the velocity (|v|), we use the equation:
|v| = [tex]sqrt(v_x^2 + v_y^2)[/tex]
|v| = sqrt[tex](0^2 + (-17.9712)^2) m/s[/tex]
|v| ≈ 17.9712 m/s
Therefore, the magnitude of the velocity at t = 3.12 s is approximately 17.9712 m/s.
(d) To find the angle of the velocity relative to the positive x-axis, we can use the arctan function:
angle = arctan(v_y / v_x)
Since v_x is 0, we cannot directly calculate the angle using the arctan function. However, we can infer the angle based on the sign of v_y.
In this case, since v_y is negative (-17.9712 m/s), the angle will be in the third quadrant (between -180° and -90°).
Therefore, the angle of the velocity relative to the positive x-axis at t = 3.12 s is in the range (-180°, -90°).
Learn more about differentiate here:
https://brainly.com/question/24062595
#SPJ11
Determine the inverse Laplace transform of G(s)= s 2
+10s+50
7s+60
g(t)=
The inverse Laplace transform of G(s) = (s^2 + 10s + 50)/(7s + 60) is g(t), which represents the function in the time domain. The specific form of g(t) will be explained in the following paragraph.
To find the inverse Laplace transform of G(s), we can use partial fraction decomposition and then apply the inverse Laplace transform to each term. First, we need to factor the denominator 7s + 60, which yields (s + 10)(s + 6).The partial fraction decomposition of G(s) becomes A/(s + 10) + B/(s + 6), where A and B are constants to be determined.
Next, we need to find the values of A and B by equating the numerators of the decomposed fractions with the numerator of G(s). This will result in a system of linear equations that can be solved to obtain the values of A and B.Once we have A and B, we can take the inverse Laplace transform of each term separately.
The inverse Laplace transform of A/(s + 10) is Ae^(-10t), and the inverse Laplace transform of B/(s + 6) is Be^(-6t).Therefore, the inverse Laplace transform of G(s) is g(t) = Ae^(-10t) + Be^(-6t), where A and B are determined by the partial fraction decomposition.
Learn more about Laplace transform here:
https://brainly.com/question/14487937
#SPJ11
(3). Harvard Bridge, which connects MIT with its fraternities across the Charles River, has a length of 364.4 Smoots plus one ear. The units of one Smoot is based on the length of Oliver Reed Smoot, Jr., class of 1962, who was carried or dragged length by length across the bridge so that other pledge members of the Lambda Chi Alpha fraternity could mark off (with paint) 1-Smoot lengths along the bridge. The marks have been repainted biannually by fraternity pledges since the initial measurement, usually during times of traffic congestion so that the police could not easily interfere. (Presumably, the police were originally upset because a Smoot is not an SI base units, but these days they seem to have accepted the units.) The figure shows three parallel paths, measured in Smoots (S), Willies (W), and Zeldas (Z). What is the length of 64.0 Smoots in (a) Willies and (b) Zeldas?
The length of 64.0 Smoots in Zeldas is 16.0 Willies and 5.33 Zeldas. The bridge, which links MIT with its fraternities over the Charles River, is the Harvard Bridge. It measures 364.4 Smoots plus one ear in length.
The Smoot is a unit of length based on the height of Oliver Reed Smoot Jr., the Lambda Chi Alpha fraternity's class of 1962. Because he was carried or dragged length by length over the bridge, the additional ear indicates the length of his head.
Length of Harvard Bridge = 364.4 Smoots + 1 ear.
Therefore, 1 Smoot = 364.4/1.0
= 364.4 Smoots
Length of 64.0 Smoots in (a) Willies
To find the length of 64.0 Smoots in Willies, we use the conversion ratios:
1 Willie = 4.0 Smoots
Hence, the length of 64.0 Smoots in Willies is:
64.0 Smoots × (1 Willie/4.0 Smoots)
= 16.0 Willies.
Length of 64.0 Smoots in (b) Zeldas
To find the length of 64.0 Smoots in Zeldas, we use the conversion ratios:1 Zelda = 3.0 Willies,1 Willie = 4.0 Smoots
Hence, the length of 64.0 Smoots in Zeldas is:64.0 Smoots × (1 Willie/4.0 Smoots) × (1 Zelda/3.0 Willies) = 5.33 Zeldas.
To know more about Harvard visit-
brainly.com/question/3745154
#SPJ11
A researcher constructs a mileage economy test involving 80 cars. The frequency distribution describing average miles per gallon (mpg) appear in the following table. Average mpg Frequency 15 < X ≤ 20 15 20 < X ≤ 25 30 25 < X ≤ 30 15 30 < X ≤ 35 10 35 < X ≤ 40 7 40 < X ≤ 45 3 Total a. Construct the relative frequency distribution and cumulative relative frequency distribution. b. What proportion of the cars got more than 20 mpg but no more than 25 mpg? c. What percentage of the cars got 35 mpg or less? d. What proportion of the cars got more than 35 mpg? e. Calculate the weighted mean for mpg
a. The relative frequency distribution and cumulative relative frequency distribution have been constructed based on the given frequency distribution. b. The proportion of cars that got more than 20 mpg but no more than 25 mpg is 0.375. c. The percentage of cars that got 35 mpg or less is 96.25%.
a. To construct the relative frequency distribution, divide each frequency by the total number of cars (80). The cumulative relative frequency can be obtained by summing up the relative frequencies.
Average mpg Frequency Relative Frequency Cumulative Relative Frequency
15 < X ≤ 20 15 0.1875 0.1875
20 < X ≤ 25 30 0.375 0.5625
25 < X ≤ 30 15 0.1875 0.75
30 < X ≤ 35 10 0.125 0.875
35 < X ≤ 40 7 0.0875 0.9625
40 < X ≤ 45 3 0.0375 1.0
b. The proportion of cars that got more than 20 mpg but no more than 25 mpg is equal to the cumulative relative frequency at 20 < X ≤ 25 minus the cumulative relative frequency at 15 < X ≤ 20. Therefore, the proportion is 0.5625 - 0.1875 = 0.375.
c. The percentage of cars that got 35 mpg or less can be calculated by multiplying the cumulative relative frequency at 35 < X ≤ 40 by 100. Therefore, the percentage is 0.9625 * 100 = 96.25%.
d. The proportion of cars that got more than 35 mpg can be calculated as 1 minus the cumulative relative frequency at 35 < X ≤ 40. Therefore, the proportion is 1 - 0.9625 = 0.0375.
e. To calculate the weighted mean for mpg, multiply each average mpg value by its corresponding frequency, sum up the products, and divide by the total number of cars (80).
Learn more about cumulative frequency here:
https://brainly.com/question/28491523
#SPJ11
Find the critical value t
∗
for the following situations. a) a 95% confidence interval based on df=27. b) a 98% confidence interval based on df=81. Click the icon to view the t-table. a) What is the critical value of t for a 95% confidence interval with df=27? (Round to two decimal places as needed.)
The critical value of t for a 95% confidence interval with df=27 is approximately 2.048.
To find the critical value of t for a given confidence level and degrees of freedom (df), we refer to the t-distribution table or use statistical software.
In this case, we are looking for the critical value of t for a 95% confidence interval with df=27. Using the t-distribution table, we find the row that corresponds to df=27 and locate the column that corresponds to a confidence level of 95%. The intersection of the row and column gives us the critical value, which is approximately 2.048.
The critical value of t is important in determining the margin of error in a confidence interval. It represents the number of standard errors we need to add or subtract from the sample mean to obtain the interval. In a t-distribution, as the degrees of freedom increase, the t-critical values approach the values of a standard normal distribution. Therefore, for larger sample sizes (higher degrees of freedom), the critical value of t becomes closer to the critical value of z for the same confidence level.
It is worth noting that the critical value of t is used when dealing with small sample sizes or when the population standard deviation is unknown. The t-distribution takes into account the uncertainty associated with estimating the population standard deviation based on the sample. As the sample size increases, the t-distribution approaches the standard normal distribution, and the critical value of t approaches the critical value of z.
Learn more about critical value here:
brainly.com/question/32607910
#SPJ11
Longitudinal Motion Of Airplane, Feedback Control, Solve for k1 and k2 so Given is Satisfied
We are given a set of differential equations that describe the longitudinal motion of an airplane. w = -2w +1790-278 Ö= -0.25w150 - 458 let us assume that we have state feedback control law n= ka where k describes the vectorr with gains k₁ and k₂ and is the state. We want to choose gains k such that the augmented system (after applying the control law) has a damping ratio of C = 0.5 and undamped natural frequency of wn = 20 rad/s. Please describe your approach in computing the gain values and highlight the final gains that you choose to meet the desired specifications. Hint: It might be useful to represent it in a state space form, compute the eigenvalues and then find the two gains.
The given differential equations that describe the longitudinal motion of an airplane are
w = -2w +1790-278
Ö= -0.25w150 - 458
We have the state feedback control law n= ka
where k describes the vector r with gains k₁ and k₂ and is the state.
The gains k are chosen in such a way that the augmented system (after applying the control law) has a damping ratio of C = 0.5 and undamped natural frequency of wn = 20 rad/s.
First, we need to write the above differential equations in state space form.
Let us assume that x = [w, Ö]T.
Then,x' = [w', Ö']
T =[[-2 0.25][-150 -458]] [w Ö]T + [1790 0]
T = A[x]+ B[u]
where
A = [[-2 0.25][-150 -458]],
B = [1 0]T, u = kx is the input.
Then the eigenvalues of A + BK must have a damping ratio of 0.5 and an undamped natural frequency of 20 rad/s.
The desired characteristic equation is given by
λ² + 2ζωnλ + ωn² = (λ+ 20i)(λ - 20i) + (λ + 2i)(λ - 2i)
=λ²+18λ+404
Solving for k1 and k2So Given = desired
So,[[-2-k₁ 0.25-k₂][-150 -458-k₁]] = [[18 404][-1 18]]
k₁ = -20 and k₂ = -224
The final gains are k₁ = -20 and k₂ = -224.
To know more about eigenvalues visit:
https://brainly.com/question/29861415
#SPJ11
Consider the linear transformation T:R
2
→R
2
with standard matrix [T]=[
1
5
−4
5
]. (a) Use the definition of eigenvalues and eigenvectors to verify that the vector (−2+4i,5) is a complex eigenvector of [T] with corresponding complex eigenvalue 3+4i. (Note: Do not solve the characteristic equation or use row reduction.) (b) Now let's write the complex eigenvector as (−2+4i,5)=(−2,5)+i(4,0) and consider the ordered basis B={(−2,5),(4,0)} for R
2
. Let S={(1,0),(0,1)} be the standard ordered basis for R
2
. (i) Find the transition matrix from B to S. (ii) Find the transition matrix from S to B. (iii) Find the matrix representation of T with respect to the basis B.
we verified the given vector as a complex eigen vector, found the transition matrices from B to S as B = {(-2, 5), (4, 0)} and S = {(1, 0), (0, 1)} and from S to B as[P] = [(-2, 4), (5, 0)] and obtained the matrix representation of T with respect to the basis B as [T]_B.
(a) To verify that the vector (-2+4i, 5) is a complex eigenvector of [T] with the corresponding complex eigenvalue 3+4i, we need to check if the given vector satisfies the equation [T] * (-2+4i, 5) = (3+4i) * (-2+4i, 5). By performing the multiplication, we can determine if the equation holds true.
(b) We are given two bases: B = {(-2, 5), (4, 0)} and S = {(1, 0), (0, 1)}. We need to find the transition matrices from B to S and from S to B.
(i) To find the transition matrix from B to S, we need to express the vectors in B in terms of the vectors in S. The transition matrix [P] from B to S is obtained by concatenating the column vectors of S expressed in terms of B. In this case, [P] = [(-2, 4), (5, 0)].
(ii) To find the transition matrix from S to B, we need to express the vectors in S in terms of the vectors in B. The transition matrix [Q] from S to B is obtained by concatenating the column vectors of B expressed in terms of S. In this case, [Q] = [(-1/2, 1/4), (1/5, 0)].
(iii) To find the matrix representation of T with respect to the basis B, we need to express the standard basis vectors of R^2 in terms of B and then apply the linear transformation T. The resulting vectors will form the columns of the matrix representation [T]_B.
In summary, we verified the given vector as a complex eigenvector, found the transition matrices from B to S and from S to B, and obtained the matrix representation of T with respect to the basis B.
Learn more about eigenvalue here:
https://brainly.com/question/31650198
#SPJ11
A Linear programming problem has the following three constraints: 15X+ 31Y<=465;13X+15Y=195; and 17X−Y<=201.4. The objective function is Min 14X+21Y. What combination of X and Y will yield the optimum solution for this problem? a. 15,0 b. unbounded problem c. 12,2.6 d. infeasible problem e. 0,13
The combination of X = 12 and Y = 2.6 will yield the optimum solution for this linear programming problem, with a minimum value of 310.4 for the objective function. The correct answer is option c.
To solve this linear programming problem, we need to find the combination of X and Y that will yield the optimum solution while satisfying all the given constraints. Let's analyze each option:
a. 15,0: If we substitute these values into the constraints, we can see that the first constraint is not satisfied: 15(15) + 31(0) = 225 ≠ 465. Therefore, this option does not yield the optimum solution.
b. Unbounded problem: An unbounded problem occurs when there are no constraints on the variables, allowing them to increase or decrease infinitely while still improving the objective function. In this case, there are constraints on the variables X and Y, so the problem is not unbounded.
c. 12,2.6: Substituting these values into the constraints, we find that all the constraints are satisfied:
First constraint: 15(12) + 31(2.6) = 465 (satisfied)
Second constraint: 13(12) + 15(2.6) = 195 (satisfied)
Third constraint: 17(12) - 2.6 ≤ 201.4 (satisfied)
Now, let's calculate the objective function for this option: 14(12) + 21(2.6) = 310.4. Since the objective function is to minimize, this option provides the optimum solution with a value of 310.4.
d. Infeasible problem: An infeasible problem occurs when there is no feasible solution that satisfies all the constraints. In this case, we have found a feasible solution in option c, so the problem is not infeasible.
e. 0,13: If we substitute these values into the constraints, we can see that the third constraint is not satisfied: 17(0) - 13 > 201.4. Therefore, this option does not yield the optimum solution.
Learn more about objective function here:
https://brainly.com/question/33272856
#SPJ11
Calculate Ocean Freight charges in Canadian dollar
We have a shipment of two different cargos:
2 skids of Apple, 100 cm x 100 cm x 150 cm, 400 kg each
3 boxes of Orange, 35" x 25" x 30", 100 kg each
Ocean freight rate to Mumbai: $250 USD / m3
1 USDD= 1.25 CND
1 m3=1000 kg
The ocean freight charges for the given shipment in Canadian dollars would be approximately 603.25 CAD.
To calculate the ocean freight charges in Canadian dollars for the given shipment, we need to follow these steps:
Step 1: Calculate the volume and weight of each cargo item:
For the skids of Apple:
Volume = 100 cm x 100 cm x 150 cm
= 1,500,000 cm³
= 1.5 m³
Weight = 400 kg each x 2
= 800 kg
For the boxes of Orange:
Volume = 35" x 25" x 30"
= 26,250 cubic inches
= 0.4292 m³
Weight = 100 kg each x 3
= 300 kg
Step 2: Calculate the total volume and weight of the shipment:
Total Volume = Volume of Apples + Volume of Oranges
= 1.5 m³ + 0.4292 m³
= 1.9292 m³
Total Weight = Weight of Apples + Weight of Oranges
= 800 kg + 300 kg
= 1,100 kg
Step 3: Convert the ocean freight rate to Canadian dollars:
Ocean freight rate to Mumbai = $250 USD / m³
Conversion rate: 1 USD = 1.25 CAD (Canadian dollars)
Freight rate in CAD = $250 USD/m³ x 1.25 CAD/USD
= 312.5 CAD/m³
Step 4: Calculate the freight charges for the shipment:
Freight charges = Total Volume x Freight rate in CAD
Freight charges = 1.9292 m³ x 312.5 CAD/m³
= 603.25 CAD
For similar questions on Canadian dollars
https://brainly.com/question/15952009
#SPJ8
Suppose that f(x, y) = 4x^4 + 4y^4 – 2xy
Then the minimum is _____
To find the minimum of the function [tex]f(x, y) = 4x^4 + 4y^4 - 2xy,[/tex] we can differentiate the function with respect to x and y and set the resulting partial derivatives equal to zero.
Taking the partial derivative with respect to x, we have:
∂f/∂x = [tex]16x^3 - 2y.[/tex]
Setting this derivative equal to zero, we get:
[tex]16x^3 - 2y = 0.[/tex]
Similarly, taking the partial derivative with respect to y, we have:
∂f/∂y = [tex]16y^3 - 2x.[/tex]
Setting this derivative equal to zero, we get:
[tex]16y^3 - 2x = 0.[/tex]
Solving these two equations simultaneously, we can find the critical point where both partial derivatives are zero.
From the first equation, we have:
[tex]2y = 16x^3.[/tex]
Substituting this into the second equation, we get:
[tex]16y^3 - 2x = 16(16x^3)^3 - 2x \\\\= 0.[/tex]
Simplifying this equation, we have:
[tex]16^4x^9 - 2x = 0.[/tex]
Factoring out x, we have:
[tex]x(16^4x^8 - 2)[/tex] = 0.
Setting each factor equal to zero, we find two possibilities:
x = 0 or [tex]x^8 = (\frac{2}{16})^4[/tex].
The value x = 0 leads to y = 0 from the first equation. So one critical point is (0, 0).
To find the minimum, we need to analyze the second derivative test or the behavior of the function in the vicinity of the critical point. However, in this case, since [tex]x^8 = (\frac{2}{16})^4[/tex] has no real solutions, we do not have any additional critical points.
Therefore, the only critical point is (0, 0). Substituting this into the function, we find:
f(0, 0) = 0.
Thus, the minimum value of the function [tex]f(x, y) = 4x^4 + 4y^4 - 2xy[/tex] is 0, which occurs at the critical point (0, 0).
To know more about Function visit-
brainly.com/question/31062578
#SPJ11
True or False? (a) sinx=O(1) as x→[infinity]. (b) sinx=O(1) as x→0. (c) logx=O(x 1/100
) as x→[infinity]. (d) n!=O((n/e) n
) as n→[infinity]. (e) A=O(V 2/3
) as V→[infinity], where A and V are the surface area and volume of a sphere measured in square microns and cubic miles, respectively. (f) fl(π)−π=O(ϵ machine
). (We do not mention that the limit is ϵ machine
→0, since that is implicit for all expressions O(ϵ machine
) in this book. ) (g) fl(nπ)−nπ=O(ϵ machine
), uniformly for all integers n. (Here nπ represents the exact mathematical quantity, not the result of a floating point calculation.)
A. sin(x) is of order O(1) as x approaches infinity.
B. sin(x) is of order O(1) as x approaches 0.
C. log(x) is not of order O(x^(1/100)) as x approaches infinity.
D. n! is of order O((n/e)^n) as n approaches infinity.
E. A is of order O(V^(2/3)) as V approaches infinity.
F. The difference between the two, fl(π) - π, is of the order O(ϵ_machine), where ϵ_machine represents the machine precision.
G. This holds because the relative error in representing nπ using floating-point arithmetic is of the order ϵ_machine.
(a) True. As x approaches infinity, sin(x) oscillates between -1 and 1, but its magnitude remains bounded. Therefore, sin(x) is of order O(1) as x approaches infinity.
(b) True. As x approaches 0, sin(x) oscillates between -1 and 1, but its magnitude remains bounded. Therefore, sin(x) is of order O(1) as x approaches 0.
(c) False. As x approaches infinity, the growth rate of log(x) is much slower than x^(1/100). Therefore, log(x) is not of order O(x^(1/100)) as x approaches infinity.
(d) True. By Stirling's approximation, n! is approximately equal to (n/e)^n. Therefore, n! is of order O((n/e)^n) as n approaches infinity.
(e) False. The surface area A and volume V of a sphere have different scaling behaviors. A is proportional to V^(2/3), but it does not mean that A is of order O(V^(2/3)) as V approaches infinity.
(f) True. fl(π) represents the floating-point approximation of π, and π is the exact mathematical quantity. The difference between the two, fl(π) - π, is of the order O(ϵ_machine), where ϵ_machine represents the machine precision.
(g) True. The difference between nπ (exact mathematical quantity) and fl(nπ) (floating-point approximation) is of the order O(ϵ_machine), uniformly for all integers n. This holds because the relative error in representing nπ using floating-point arithmetic is of the order ϵ_machine.
Learn more about machine from
https://brainly.com/question/30492354
#SPJ11
For a vector with polar coordinates (r=12.4,θ=10.0
∘
), calculate the y-component.
The y-component of the vector with polar coordinates (r = 12.4, θ = 10.0∘) is approximately 2.15. The y-component is determined by multiplying the magnitude of the vector (r = 12.4) by the sine of the angle (θ = 10.0∘).
To calculate the y-component of a vector in polar coordinates, we use the formula y = r * sin(θ), where r is the magnitude of the vector and θ is the angle in degrees. In this case, the given magnitude is r = 12.4 and the angle is θ = 10.0∘. Plugging these values into the formula, we get:
y = 12.4 * sin(10.0∘)
Using a calculator, we find that the sine of 10.0∘ is approximately 0.1736. Multiplying this value by 12.4, we get:
y ≈ 12.4 * 0.1736 ≈ 2.15
Therefore, the y-component of the vector is approximately 2.15. This represents the vertical component of the vector's direction and magnitude.
Learn more about magnitude here:
brainly.com/question/14033610
#SPJ11
Find the equation of the tangent line to the curve 5y^2 = −3xy + 2, at (1, −1).
The equation of the tangent line to the curve 5y² = −3xy + 2, at (1, −1) is 3x + 10y + 13 = 0.
To find the equation of the tangent line to the curve 5y² = −3xy + 2, at (1, −1), we have to use the formula y - y1 = m(x - x1), where (x1, y1) is the point of tangency and m is the slope of the tangent line.
We can find the slope by differentiating the equation of the curve with respect to x.
5y² = −3xy + 2
Differentiating with respect to x:
10y(dy/dx) = -3y - 3x(dy/dx)dy/dx = (3x - 10y)/10
At (1, -1), the slope of the tangent line is:
dy/dx = (3(1) - 10(-1))/10 = 13/10
The equation of the tangent line can now be found:
y - (-1) = (13/10)(x - 1)y + 1
= (13/10)x - 13/10y + 1
= (13/10)x - 13/10 - 10/10y + 13/10
= (13/10)x + 3/10
Multiplying through by 10 to eliminate fractions, we get:
3x + 10y + 13 = 0.
Learn more about tangent line here:
https://brainly.com/question/28994498
#SPJ11
Find the nth term of the geometric sequence whose initial term
is a1=5.5 and common ratio is 8.
an=
Your answer must be a function of nn.)
The function of nth term is given by an = 5.5 * 8^(n - 1).
Given that the initial term of the geometric sequence is[tex]`a1=5.5`[/tex]and the common ratio is [tex]`r=8`.[/tex]We are to determine the `nth` term of the geometric sequence.
There is a formula to find the nth term of a geometric sequence. It is given as follows:
[tex]an = a1 * rn-1[/tex]
Where,a1 is the initial term,r is the common ratio,n is the nth term of the geometric sequence
[tex]an = 5.5 * 8^(n - 1)[/tex]
Hence, the function of nth term is given by
[tex]an = 5.5 * 8^(n - 1).[/tex]
More about geometric sequence
https://brainly.com/question/27852674
#SPJ11
3. Show all steps tolsolve: \[ \text { If } S=[-3,6], T=[2,7], f(x)=x^{2}, \text { then } f(S \cup T)= \] a. \( [9,49] \) b. \( [0,49] \) c. \( [0,36] \) d. \( [4,49] \)
\[f(S \cup T) = [f(-3), f(6)] \cup [f(2), f(7)]\]\[\Rightarrow f(S \cup T) = [9,36] \cup [4,49]\]
On combining, we get,\[f(S \cup T) = [4,49]\)
Given \(S=[-3,6], T=[2,7]\) and \(f(x)=x^2\)
We know that
\[f(S \cup T) = [f(-3), f(6)] \cup [f(2), f(7)]\]
Now, we will find out the values of
\[f(-3), f(6), f(2) \text{ and } f(7)\]
By substituting \(x = -3\), we get
\[f(-3) = (-3)^2 = 9\]
By substituting \(x = 6\), we get
\[f(6) = 6^2 = 36\]
By substituting \(x = 2\), we get
\[f(2) = 2^2 = 4\]
By substituting \(x = 7\), we get
\[f(7) = 7^2 = 49\]
Therefore, \[f(S \cup T) = [f(-3), f(6)] \cup [f(2), f(7)]\]\[\Rightarrow f(S \cup T) = [9,36] \cup [4,49]\]
On combining, we get,\[f(S \cup T) = [4,49]\)
Hence, option (d) is correct.Option d. \([4,49]\)
Learn more about combining from the given link
https://brainly.com/question/11732255
#SPJ11
For the scenario given, determine the smallest set of numbers for its possible values and classify the values as either discrete or continuous. the number of rooms vacant in a hotel Choose the smallest set of numbers to represent the possible values. integers irrational numbers natural numbers rational numbers real numbers whole numbers Are the values continuous or discrete? continuous discrete
The possible values of the number of rooms vacant in a hotel can be represented by the set of whole numbers and are classified as discrete.
The number of vacant rooms in a hotel can be represented as a set of whole numbers, which are also called natural numbers.
The reason for this is that it is not possible to have a fraction or irrational number of vacant rooms. It can only be a whole number that is either positive or zero.In terms of classification, the values of the number of rooms vacant in a hotel are discrete.
The reason for this is that the number of rooms vacant can only take on whole number values. It cannot take on values in between the whole numbers.
Therefore, the possible values of the number of rooms vacant in a hotel can be represented by the set of whole numbers and are classified as discrete.
To know more about whole numbers visit:
https://brainly.com/question/29766862
#SPJ11
A die is tossed that yields an even number with twice the probability of yielding an odd number. What is the probability of obtaining an even number, an odd number, a number that is even or odd, a number that is even and odd?
The probability of obtaining an even number, an odd number, a number that is even or odd, a number that is even and odd is 2/3, 1/3, 1 and 0, respectively.
Calculation: Let P(E) be the probability of obtaining an even number, and P(O) be the probability of obtaining an odd number. Then, P(E) = 2P(O)Also, P(E) + P(O) = 1. Now, substituting the value of P(E) in the above equation: P(O) = 1/3P(E) = 2/3Hence, P(E) = 2/3 and P(O) = 1/3Therefore, the probability of obtaining an even number is 2/3, and the probability of obtaining an odd number is 1/3.
The probability of obtaining a number that is even or odd is P(E) + P(O) = 2/3 + 1/3 = 1. Therefore, the probability of obtaining a number that is even or odd is 1.The probability of obtaining a number that is even and odd is 0. Thus, the probability of obtaining an even number, an odd number, a number that is even or odd, a number that is even and odd is 2/3, 1/3, 1 and 0, respectively.
To know more about probability visit:
brainly.com/question/29512433
#SPJ11
The acceleration of a block atfached to a spring is given by A=−(0.302 m/s
2)cos([2.41rad/s]). What is the frequency, f, of the block'
The frequency of the block is 0.383 Hz.
The acceleration of a block attached to a spring is given by A = - (0.302 m/s^2) cos ([2.41 rad/s]).
We are required to find the frequency, f of the block. The angular frequency, w = 2πf .The given acceleration A is given byA = - (0.302 m/s^2) cos ([2.41 rad/s]) We know that acceleration a is given by a = - w^2xwhere x is the displacement of the block from its equilibrium position. On comparing the above equations, we getw^2 = 2.41 rad/s From this, we can find the frequency f as f = w/2πf = (2.41 rad/s)/2πf = 0.383 Hz
Therefore, the frequency of the block is 0.383 Hz.
Learn more about frequency in the link:
https://brainly.com/question/254161
#SPJ11
Consider the linear regression model:student submitted image, transcription available below
where y is a dependent variable, xi corresponds to independent variables and θi corresponds to the parameters to be estimated. While approximating a best-fit regression line, though the line is a pretty good fit for the dataset as a whole, there may be an error between the predicted valuestudent submitted image, transcription available belowand true value y for every data point x = x1, x2, ..., xk in the dataset. This error is captured bystudent submitted image, transcription available below, where for each data point with features xi, the labelstudent submitted image, transcription available belowis drawn from a Gaussian with meanstudent submitted image, transcription available belowand variancestudent submitted image, transcription available below. Given a set of N observations, provide the closed form solution for an ordinary least squares estimatestudent submitted image, transcription available belowfor the model parameters θ.
For the ordinary least squares method, the assumption is thatstudent submitted image, transcription available below
where σ is a constant value. However, whenstudent submitted image, transcription available below
the error term for each observation Xi has a weight Wi corresponding to it. This is called Weighted Least Squares Regression. In this scenario, provide a closed form weighted least squares estimatestudent submitted image, transcription available belowfor the model parameters θ.
The closed form solution for weighted least squares estimation involves multiplying the design matrix by the square root of the weight matrix and performing a linear regression using the weighted inputs and outputs.
In weighted least squares regression, we introduce a weight matrix W, which represents the relative importance or uncertainty associated with each observation. The weight matrix is a diagonal matrix, with each diagonal element corresponding to the weight for the corresponding data point. The weights can be determined based on prior knowledge or by assigning higher weights to more reliable observations.
To obtain the closed form solution for weighted least squares estimation, we need to modify the ordinary least squares approach. Let X be the design matrix containing the independent variables and y be the vector of dependent variable values. The weighted least squares estimate can be obtained by multiplying the design matrix by the square root of the weight matrix, denoted as [tex]W^{0.5}[/tex], and performing a weighted linear regression. The weighted least squares estimate for the model parameters θ is given by:
θ =[tex]\frac{1}{(X^{T}*W^{0.5}*X^{}*X^{T}*W^{0.5}*y)}[/tex]
where [tex]X^{T}[/tex] denotes the transpose of [tex]X^{}[/tex]. This formula adjusts the inputs and outputs according to their respective weights, allowing for a more accurate estimation that accounts for the varying levels of uncertainty or importance associated with each observation.
By incorporating the weights into the estimation process, the weighted least squares approach gives more emphasis to the data points with lower errors or higher importance, while reducing the impact of data points with higher errors or lower reliability. This allows for a more robust and accurate estimation of the model parameters in the presence of heteroscedasticity or varying levels of uncertainty across the dataset.
Learn more about least squares regression here:
https://brainly.com/question/28661717
#SPJ11
A monomial is a product of variables to powers. The total degree
of the monomial is the sum of the powers. For example x2y3z4 is a
monomial in three variables with total degree 9. How many monomials
a
The question asks for the number of monomials with a total degree of 7 in three variables.
Let's consider the three variables: x, y, and z.
To have a total degree of 7, we need to distribute the powers among the variables in such a way that the sum of the exponents is 7.
We can represent this situation using stars and bars. Let's say we have 7 stars (representing the total degree) and 2 bars (representing the variables y and z).
For example, if we arrange the stars and bars as follows: **|****|****, this corresponds to the monomial x^2 * y^0 * z^5. The sum of the exponents is indeed 7.
Using the stars and bars method, the number of ways to arrange the 7 stars and 2 bars is given by the binomial coefficient (7+2-1) choose (2) = C(8, 2).
Using the formula for binomial coefficients, we have C(8, 2) = 8! / (2! * (8-2)!) = 8! / (2! * 6!) = (8 * 7) / (2 * 1) = 28.
Therefore, there are 28 monomials with a total degree of 7 in three variables.
Read more about Monomials at;
brainly.com/question/102541
#SPJ11
The weipht of an organ in adult mades has a bell-shaped distrbution with a mean of 350 grams and a standard deviation of 20 grams. Use the empirical rule to detarmine the following (a) About 99.74 of organs will be betwesn what weights? (b) What percentage of organs weighis between 310 grams and 390 grams? (c) What percentage of organis weighs less than 310 grams or moce than 390 grams? (d) What percentage of organs weighs between 310 grams and 410 grams? (a) Thd grams (Use ascending order.)
The answers are:
(a) About 99.74% of organs will be between 290 grams and 410 grams.
(b) The percentage of organs that weigh between 310 grams and 390 grams is approximately 95%.
(c) The percentage of organs that weigh less than 310 grams or more than 390 grams is approximately 5%.
(d) The percentage of organs that weighs between 310 grams and 410 grams is approximately 99.7%
(a) According to the empirical rule, approximately 99.74% of the organs will be between[tex]$\text{350} - 3 \times \text{20} = \text{290}$ grams and $\text{350} + 3 \times \text{20} = \text{410}$[/tex]grams.
(b) The organs weighing between 310 grams and 390 grams fall within the range of mean plus or minus 2 standard deviations. Hence, the percentage of organs in this range is approximately 95%.
(c) The percentage of organs that weigh less than 310 grams or more than 390 grams is approximately 100% - 95% = 5%
(d) The organs weighing between 310 grams and 410 grams fall within the range of mean plus or minus 3 standard deviations. Hence, the percentage of organs in this range is approximately 99.7%.
To know more about empirical rule
https://brainly.com/question/30573266
#SPJ11
Differential Equations
\[ \begin{array}{l} \frac{d R}{d t}=0.08 R(1-0.0005 R)-0.003 R W \\ \frac{d W}{d t}=-0.01 W+0.00001 R W \end{array} \] Find al of the equatibium solutions. wolves, one with 200 rabbits and 20 wolves.
In summary, the equilibrium solutions of the given system of differential equations are:
1. \(R = 0\) and any value of \(W\)
2. \(W = 0\) and any value of \(R\) satisfying the equation \(0.08 - 0.00004R = 0\) (which gives \(R = 2000\))To find the equilibrium solutions of the given system of differential equations, we need to find the values of R and W for which both derivatives are equal to zero.
Let's set \(\frac{dR}{dt} = 0\) and \(\frac{dW}{dt} = 0\):
1. Equilibrium for \(\frac{dR}{dt} = 0\):
\[0.08R(1-0.0005R)-0.003RW = 0\]
Simplifying the equation:
\[0.08R - 0.00004R^2 - 0.003RW = 0\]
Factoring out R:
\[R(0.08 - 0.00004R - 0.003W) = 0\]
This equation gives us two possibilities for equilibrium:
a) \(R = 0\)
b) \(0.08 - 0.00004R - 0.003W = 0\)
2. Equilibrium for \(\frac{dW}{dt} = 0\):
\[-0.01W + 0.00001RW = 0\]
Factoring out W:
\[W(-0.01 + 0.00001R) = 0\]
This equation gives us two possibilities for equilibrium:
a) \(W = 0\)
b) \(-0.01 + 0.00001R = 0\)
Now let's substitute the values from the given scenario (200 rabbits and 20 wolves) into the equilibrium equations to check if they satisfy the conditions:
1. For \(R = 200\) and \(W = 20\):
a) From the equilibrium equation for \(\frac{dR}{dt}\): \(0.08 - 0.00004(200) - 0.003(20) = 0.08 - 0.08 - 0.06 = -0.06 \neq 0\)
b) From the equilibrium equation for \(\frac{dW}{dt}\): \(-0.01 + 0.00001(200) = -0.01 + 0.002 = -0.008 \neq 0\)
Therefore, the given scenario of 200 rabbits and 20 wolves does not satisfy the conditions for equilibrium.
Learn more about equation here:
brainly.com/question/29657983
#SPJ11
Define the function P(x)={
c(6x+3)
0
x=1,2,3
elsewhere
. Determine the value of c so that this is a probability mass function. Write your answer as a reduced fraction.
The function P(x) is defined as c(6x+3) for x = 1, 2, 3, and 0 elsewhere. By solving the equation 30c = 1, we can determine the value of c as 1/30.
To ensure that P(x) is a probability mass function (PMF), we need to find the value of c. The value of c can be determined by ensuring that the sum of probabilities over all possible values of x equals 1.
After evaluating the function for x = 1, 2, and 3, we find that the sum of probabilities is 18c + 9c + 3c = 30c. To satisfy the requirement of a PMF, this sum should be equal to 1. Therefore, by solving the equation 30c = 1, we can determine the value of c as 1/30.
A PMF assigns probabilities to discrete random variables. In this case, the function P(x) is defined differently for x = 1, 2, 3, and elsewhere. To ensure that P(x) is a PMF, the sum of probabilities for all possible values of x should equal 1. Let's evaluate the function for x = 1, 2, and 3:
P(1) = c(6(1) + 3) = 9c
P(2) = c(6(2) + 3) = 18c
P(3) = c(6(3) + 3) = 27c
To find the value of c, we sum up these probabilities:
P(1) + P(2) + P(3) = 9c + 18c + 27c = 54c
For P(x) to be a valid PMF, the sum of probabilities should be 1. Therefore, we set 54c equal to 1 and solve for c:
54c = 1
c = 1/54
Simplifying the fraction, we obtain c = 1/30. Hence, the value of c that makes the function P(x) a PMF is 1/30.
Learn more about Probability here:
brainly.com/question/32245736
#SPJ11
What are the vertices of the image produced after applying the transformation T-2, -4) to rectangle ABCD?
A' =
B'=
C'=
D'=
The coordinates of under the transformations are A' = (-3, -1), B' = (-3, 1), C' = (1, 1) and D' = (1, -1)
Calculating the coordinates under the transformationsfrom the question, we have the following parameters that can be used in our computation:
The rectangle ABCD
Where, we have
A = (-1, 3)
B = (-1, 5)
C = (3, 5)
D = (3, 3)
The transformation is given as T(-2, -4)
This means that
(x - 2, y - 4)
So, we have
A' = (-3, -1)
B' = (-3, 1)
C' = (1, 1)
D' = (1, -1)
Read more about transformation at
https://brainly.com/question/31898583
#SPJ1
NEED THIS ASAP geometry
Answer:
A = 10² + 2π(5²) = 100 + 50π
= about 257.1 units²
