Answer: [tex]N43.2[/tex]
Explanation:
Given
Power consumption of bulb and water are [tex]60\ W[/tex] and [tex]240\ W[/tex]
If the Devices are on for four hours
Total power of devices [tex]60+240=300\ W[/tex]
Energy consumed for 4 hours is
[tex]\Rightarrow 300\times 4=1200 Wh\\\Rightarrow 1.2\ kWh[/tex]
For 30 days it is [tex]1.2\times 30=36\ kWh[/tex]
Cost for 30 days [tex]36\times 1.2=43.2\ N[/tex]
A rocket blasts off. In 10.0 seconds it is at 10,000 ft, traveling at 3600 mph. Assuming the direction is up, calculate the acceleration.
Answer:
Explanation:
Givens
t = 10 seconds
vi = 0
vf = 3600 mph
a = ?
d = 10000 feet
Formula
a = (vf - vi)/t
Solution
vf = 3600 mph * 1 hr / 3600 seconds * 5280 feet / 1 mile = 5280 ft / sec
a = (5280 - 0)/10
a = 528 ft/sec^2
HELP ME
Which two changes to the can opener would increase its mechanical efficiency?
A shorten the paddle so that they are closer in size to the axle that they turn
B grease the rotating wheel of the opener so that there is less breaks in between moving parts
C replaced it with a straight handle the act as levers with shorter pieces of metal
D sand the cutting surface of the metal piece so that it is perfectly smooth and sharp
Answer:
I THINK IT'S D....
HOPE SO
Calculate the acceleration of a train of mass 30 000 kg when driven by a force of 15000 N.
Answer:
Explanation:
F = ma, so filling in:
15000 = 30000a and
a = .50 m/s/s
The acceleration of a train is 0.50 [tex]m/s^{2}[/tex].
What is acceleration?Acceleration is the rate of change of the velocity of an object with respect to time.
F = ma
a = F/m
a = 15000/30000
a = 0.50 [tex]m/s^{2}[/tex]
To learn more about Acceleration here
https://brainly.com/question/12550364
#SPJ2
Plutonium-32 has a half-life of 14.2 days. After 99.4 days, how much of what was originally a 499.2 gram sample remains?
14 grams
3.9 grams
35.7 grams
0.71 grams
Answer:
3.9 gm remains
Explanation:
499.2 ( 1/2)^(99.4/14.2) = 3.9 gm
Derive the following equations. :a=u-v by t
can anyone please help me
Answer:its most likely c
Explanation:
Describe the laws of liquid pressure and explain the term fluid. (Please try to give the correct answer 'coz it's urgent!)
Answer:
The laws of liquid pressure are: ... The liquid pressure at a point inside the liquid is same in all directions. The liquid pressure at a point inside the liquid is directly proportional to the depth of that point from the free surface of liquid. The pressure of liquid at same depth is different for different liquids
Answer:
The laws of liquid pressure:
The pressure that is inside the liquid rises with the intensity from the surface of a liquid.
The term fluid:
Fluid is basically liquid and a substance that is known to have no certain shape. The opposite of the term fluid would be solid.
You are pulling a sled using a horizontal rèpe, as shown in the diagram. The rope pulls the sled. exerting a force of 50 N to the right. The snow exerts a friction force of 30 N on the sled to the left. The mass of the sled is 50 kg.
Find the sun of the force on the self
Determine the acceleration of the sled
If the sled has an initial velocity 2m/s to the right, how fast will it be traveling after 5 seconds?
Answer:
Part 1
20 N
Part 2
0.4 m/s²
Part 3
4 m/s
Explanation:
The force which pulls the sled right = 50 N
The friction force exterted towards left by the snow = -30 N
The mass of the sled = 50 kg
Part 1
The sum of the forces on the sled, F = 50 N + (-30) N = 20 N
Part 2
The acceleration of the sled is given as follows;
F = m·a
Where;
m = The mass of the sled
a = The accelertion
a = F/m
∴ a = (20 N)/(50 kg) = 0.4 m/s²
The acceleration of the sled, a = 0.4 m/s²
Part 3
The initial velocity of the sled, u = 2 m/s
The kinematic equation of motion to determine the speed of the sled is v = u + a·t
The speed, v, of the sled after t = 5 seconds is therefore;
v = 2 m/s + 0.4 m/s² × 5 s = 4 m/s.
state the term used to describe the turning force exerted by the man pushing down on a lever to lift one end of a heavy log
The term used to describe the turning force exerted when pushing an object is effort.
What is effort?The is the input force or force applied at one point of a lever in order to overcome a load.
The relationship between effort, load and mechanical advantage of a lever is given as;
M.A = L/E
where;
M.A is mechanical advantageL is the loadE is the applied force or effortThus, the term used to describe the turning force exerted when pushing an object is effort.
Learn more about effort here: https://brainly.com/question/24237657
PLS PLS PLS HELP ME! IT IS DUE IN TEN MINUTES
For his next stunt, Super Dave (80 kg) starts running at 2.00 m/s, then slides down a frictionless slide which is elevated 12.0 m above the ground, then slides across the rough asphalt ground to slow him to a stop (ouch!) He slides across the asphalt for 8.00 m before coming to a stop. What is the coefficient of friction between Super Dave and the ground?
Answer:
Preface to Students: Welcome to Physics! iv. 1 Motion. 1. 1-1 Speed, Velocity, and. Acceleration. 1. 1-2 Free Fall. 8. 2 Vectors and Projectiles.
257 pages·3 MB
Explanation: I hope this helpssss!!!
Based on its location on the periodic table, which element is the best
electrical insulator?
A. Iron (Fe)
O B. Sulfur (S)
O C. Calcium (Ca)
D. Silver (Ag)
Answer:
B
Explanation:
Nonmetal is better insulator than metals
Answer:
B
Explanation:
Just took the quiz.
What is concave mirror?
Answer:
A concave mirror, or converging mirror, has a reflecting surface that is recessed inward (away from the incident light). Concave mirrors reflect light inward to one focal point. They are used to focus light.
A 0.0780 kg lemming runs off a
5.36 m high cliff at 4.84 m/s. What
is its potential energy (PE) when it
jumps?
Answer:
4.097 Joules
Explanation:
Applying,
P.E = mgh............... Equation 1
Where P.E = Potential energy, m = lemming mass, h = height, g = acceleration due to gravity
From the question,
Given: m = 0.0780 kg, h = 5.36 m
Constant: g = 9.8 m/s²
Substitute these values into equation 1
P.E = 0.0780(9.8)(5.36)
P.E = 4.097 Joules.
Hence the potential energy is 4.097 Joules
Answer:
4.097 J
Explanation:
một oto đang chạy với vận tốc là 10m/s thì tăng tốc và chuyển động nhanh dần đều sau 20s thì đạt vận tốc 14m/s
a) tính gia tốc của xe
b) tính vận tốc xe sau 40s kể từ khi tăng tốc và quãng đường xe đi được trong thời gian đó
a) gia tốc = vf-vi / t
a = 14-10 / 20
a = 0,2ms⁻²
b) dưới dạng a = Δv / t
v = lúc
v = 0,2 × 40
v = 8ms⁻¹
như v = d / t
do đó d = vt
d = 8 × 40
d = 320m
hãy đánh dấu là trí óc nhất
Why are houses in hot areas painted in white while those in cold areas painted with dull colours
Answer:
Because white color reflects back the heat coming from the sun while dull colors absorb the heat.
A magnet falls through a loop of wire with the south pole entering first. After it has fallen all the way through the wire loop so that the north pole end is moving away from the loop, what is the direction of the induced current in the loop (as viewed from above, looking down on the magnet)
Answer:
The induced current direction as viewed is clockwise
Explanation:
Lenz's Law states that the induced e. m. f. causes current to be driven in the loop of wire in such a way as to generate magnetic field that are oppose the magnetic flux change which is the source of the induced current
Therefore, as the magnet approaches the coil with the south pole, the coil produces current equivalent to the upward movement of the south pole of a permanent magnet through it which according to Flemings Right Hand Rule is clockwise
Therefore;
The direction of the induced current in the loop (as viewed from above, looking down the magnet) is clockwise
một hòn đá có khối lượng 5kg bay với vận tốc 72kg/h . động lượng của hòn đá là
Answer:
Momentum = 100 Kgm/s
Explanation:
Given the following data;
Speed = 72 km/h
Mass = 5 kg
To find the momentum of the stone;
First of all, we would have to convert the value of speed to meter per seconds.
Conversion:
72 km/h to m/s = (72 * 1000)/3600 = 20 m/s
Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.
Mathematically, momentum is given by the formula;
Momentum = mass * velocity
Substituting the values into the formula, we have;
Momentum = 5 * 20
Momentum = 100 Kgm/s
Define electric current and drift velocity.
Answer:
Explanation: The voltage or potential difference between two points is defined to be the change in ... I = qnAv relates the drift velocity to the current
Give reason.
b} String roller is an example of wheel and axel .Why?
Explanation:
string roller is called an example of wheel and axel because The thin rod which needs to be turned is called the axle and the wider object fixed to the axle, on which we apply force is called the wheel.
hence the we apply force on the roller and the string gets tight.
28 Why is soft iron used for the core of an electromagnet?
А Soft iron easily becomes a permanent magnet.
B Soft iron is a good electrical conductor.
с Soft iron is a poor thermal conductor.
D Soft iron loses its magnetism when the current in the coil is switched off.
Answer:
An electromagnet is a form of magnet that is made by the passage of electric current through a coil of wire. The core of an electromagnet increases the strength of the produced magnetic field
Soft iron is used as the core of an electromagnet because soft iron is a magnetic material and therefore it is permeable to and becomes magnetized by the magnetic field coming from the flowing current, thereby allowing more flux to pass through the core of the electromagnet, producing a magnetic field strength that is several times that of an air core electromagnet as the relative permeability (to magnetic flux, compared to vacuum) of soft iron is about 64 × 10³
However, once the current is switched, the soft iron does not remain its magnetic, and therefore, the electromagnet becomes demagnetized, thereby being able to maintain its electromagnetic characteristics (being made magnetic by the flow of electric current)
Explanation:
Use the equation d=st where d= distance, s= speed, and t= time. If you ride a skateboard at a speed of 8m/s for 12 seconds, how far do you travel
Answer:
96 meters
Explanation:
d = st
d = (8 m/s)(12 s)
d = 96 m
describe the forest ecosystem with examples
A forest ecosystem describes the community of plants, animals, microbes and all other organisms in interaction with the chemical and physical features of their environment: Specifically, a terrestrial environment dominated by trees growing in a closed canopy — a forest, in other words.
Hope this helps you buddy! :)
The gravitational force of the two objects is 6.67x10-11N. Explain this statement.
Answer:
it means that the force of attraction between two object in gravitation is 6.67×10-11N
It means that the force of attraction between two object in gravitation is 6.67×10-11N.
What is the formula of mass in gravitational force?The formula is g = GM/r2, Where M is the mass of the Earth, r is the radius of the Earth (or distance between the center of the Earth and you, standing on its surface), and G is the gravitational constant. G (without the subscripts) is the gravitational constant, and c is the speed of light.
What is the gravitational force between two objects?The gravitational force between two objects is proportional to their masses and inversely proportional to the square of the distance between their centers. joining the two centers of masses.
Learn more about gravitational force here: brainly.com/question/13010127
#SPJ2
Explain how a submarine
floats on the water surface
and dives down into water.
Answer:
A submarine uses tanks that are filled with compressed air and when it is needed the air is released and takes on water which increase the density making it sink but when the water is pushed out the sub marine density is decreased making it float
Water falls down as a stream from a tap. Why does it not scatter?
Answer:
as it hits the ground it's dispersed and this causes it to move in different directions
if you rub a ballon with wool or duster it can charge it negatively where do these extre charge come from?
Answer:
The electrons come from the free electrons in wool which contains moisture or other forms of additives that creates impurity centers which causes the wool to be electrically conductive
Explanation:
Wool which is mixed with certain substances, conducts electricity in a manner similar to the wool-water system that give rise to centers of impurities where electrical conduction takes place
The ability to conduct electricity is related to the presence of free electrons on a material. Therefore, when a balloon, which is an insulator, is rubbed with wool, some of the mobile electrons on wool, which is also an insulator without the presence of substances that aid its electrical conductivity, are transferred to the balloon, thereby making the balloon to be negatively charged
4. diference between VR and efficiency
Answer:
Velocity ratio of simple machine is the ratio of distance travelled by effort to the distance travelled by load in the machine. The efficiency of a simple machine is defined as the ratio of useful work done by machine (output work) to the total work put into the machine (input work).
20.In case the conductor is a heating appliance, then this energy(w) is converted into heat(H) i.e
A. w=H C. w=I2Rt
B. w=VIt D. all of above
Answer:
not sure just need points
Explanation:
a+b+c
25 POINTS 25 POINTS 25 POINTS 25 POINTS 25 POINTS
Assignment: Build an Electromagnet and a Motor Investigation
Electromagnet
1. How many paper clips did the wire wrapped around the nail just a few times pick up?
2. Which electromagnet design was most successful in picking up the most paper clips?
3. Would wrapping the wire more times around the nail make the electromagnet stronger or weaker?
4. What do you think the result would be if an iron nail that was much thicker was used?
5. What do you think would happen if a wooden stick was chosen as the core instead of the iron nail?
Motor
1. Describe the components that are necessary to make a motor run? What do they each provide? (example: battery provides voltage source)
2. Describe how the homemade motor makes mechanical energy from electrical energy.
3. What are three appliances in your house that use a motor that turns electrical energy into mechanical energy?
All the paper clips, coiled wire with nail and wrapping or coiling the wire more times are the correct answers.
All the paper clips will the wire wrapped around the nail just a few times pick up. A coiled wire with nail in the center is the electromagnet design which is most successful in picking up the most paper clips. Wrapping or coiling the wire more times around the nail make the electromagnet more stronger.
If an iron nail that was much thicker was used, it will make the magnet stronger that leads to strong electromagnetism. There are three main parts that is necessary for making a motor i.e. a rotor, a stator and a commutator.
These three parts use the attractive and repulsive forces of electromagnetism, causing the motor to spin continually as long as it receives a steady flow of electric current. Motors comprise of loops of wire in a magnetic field.
When current is passed through the loops, the magnetic field exerts a torque on the loops, which rotates the shaft that leads to the generation of electricity. Water pump, mixer and washing machine are three appliances in your house that use a motor that turns electrical energy into mechanical energy.
https://brainly.com/question/24278437
How long does it take a car travelling at 80 m/s to decelerate to 18 m/s with an acceleration rate of -16m/s?
We know
[tex]\boxed{\sf a=\dfrac{v-u}{t}}[/tex]
[tex]\\ \sf\longmapsto t=\dfrac{v-u}{a}[/tex]
[tex]\\ \sf\longmapsto t=\dfrac{18-80}{-16}[/tex]
[tex]\\ \sf\longmapsto t=\dfrac{-62}{16}[/tex]
[tex]\\ \sf\longmapsto t=3.8s[/tex]
