a fixed amount of gas at 25.0 degrees Celsius occupies a volume of 10.0 L when the pressure is 629 torr. Use Charles law to calculate the volume the gas will occupy when the temperature is increased to 105 degrees Celsius while maintaining the pressure at 629 torr?

Answer:

Two methods which help us to conserve water are:

Sprinkler irrigation system: this irrigation has an arrangement of vertical pipes with rotating nozzles on the top. It is more useful in the uneven and sandy land where sufficient water is not available.

Drip irrigation system: this irrigation system has an arrangement of pipes or tubes with very small holes in them to water plants drop by drop just at the base of the root. It is very efficient as water is not wasted at all.

Answer:

it's level goes down

Explanation:

because the temperature is low, so mercury level is down

Answer:

Higher temperature = more bouncing.

So, the correct answer is that there will be less bouncing at 39 degrees F. (Lower at 39 F)

Let me know if this helps!

Answer:

Na2S(aq)+Cd(No3)2(aq)=CdS(s)+2NaNo3(aq)

Answer: it’s checkbox 2&3

Attached are the lewis structures,

The proton released by water bonds to the nitrogen, because it can hold charges relatively better than carbon because of it's bigger size

The structures are shown in the image attached.

A structural formula is the representation of the molecule in which all atoms and bonds in the molecule are shown.

Since the question requires that all the lone pairs, formal charges and sigma and pi bonds should be shown, then the simple condensed structural formula becomes insufficient in this case.

I have attached images of the structural formula of sodium benzoate (image 1), benzoic acid (image 2)  and tetrahydrofuran (image 3).

All the formal charges, lone pairs as well as sigma and pi bonds are fully shown.

https://brainly.com/question/9988658

Answer:

true because whenever the temperature drops it gets colder

Answer:

since mass percent is based on the proportions of elements in a compound, the mass of a sample does not matter

The mass percent or percentage by mass of a chemical compound is a constant.

Mass percent can be defined as percentage by mass and it is the concentration of a given amount (quantity) of element in a chemical compound or a component of a mixture.

The mass percent or percentage by mass of a chemical compound is a constant, regardless of the amount of substance that is present. Thus, all chemical compound always have a constant composition because mass percent is typically based on the proportions of the elements contained in a chemical compound.

Read more on mass here: brainly.com/question/3173452

The special properties of surface layers, that is, the thin layers of a substance at the boundary of contiguous bodies, mediums, or phases. These properties result from the excess free energy of the surface layer and from the special features of the layer's structure and composition.

HOPE IT'S HELPFUL FOR U MATE...

Answer:

C. yes, because it is universally applies to all objects

Explanation:

Answer

Open in answr app

The initial temperature of the coffee T0=100∘C.

The temperature of the room 15∘C.

Let T be the temperature at time t in minutes.

By Newton's law of cooling,

dtdTα(T−15)

∴dtdT=k(T−15)

⇒T−15dT=kdt

⇒∫T−15dT=∫kdt

⇒log(T−15)=kt+logc

⇒log(cT−15)=kt

⇒T−15=cekt

At t=0,T=100

We have 100−15=ce0⇒85=c

Thus we get T−15=85ekt.

When t=5minutes,T=60

⇒60−15=85e5k.

⇒e

Answer: The question is not clear

Explanation:

Answer:

Answer is Option A

Explanation:

it's the correct answer

.....................

Cellulose is insoluble in water which is made up of glucose because it possesses high inter and intramolecular hydrogen bonding between the hydroxyl groups of the neighboring chains.

Due to being insoluble in nature, it serves as the fundamental component of the cell membrane in the plant. This is why the cell wall of plant cells are made of cellulose.

The chains of the cellulose are strongly bonded to each other. So, it is very difficult for the molecules of water to rupture or destruct these bonds between the chains. It is a hydrogen bond cross-linked polymer and more complex than glucose.

Therefore, due to high inter and intramolecular hydrogen bonding between the hydroxyl groups of the neighboring chains, cellulose is insoluble in water.

To learn more about Cellulose, refer to the link:

https://brainly.com/question/1768072

#SPJ2

The mass of magnesium chloride produced from 2.30 moles of chlorine gas is 218.99 grams.

Stoichiometry refers to the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions.

According to this question, magnesium reacts with chlorine gas to form magnesium chloride as follows:

Mg + Cl₂ → MgCl₂

Based on the above chemical equation, 1 mole of chlorine gas forms 1 mole of magnesium chloride.

This means that 2.30 moles of chlorine gas will 2.30 moles of magnesium chloride.

Next, we convert moles of magnesium chloride to mass as follows:

molar mass of magnesium chloride = 95.211g/mol

mass of magnesium chloride = 95.211 × 2.30 = 218.99 grams.

Therefore, 218.99 grams of magnesium chloride will be formed.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

Answer:

State functions represent quantities or properties of a thermodynamic system, while non-state functions represent a process during which the state functions change. For example, the state function PV is proportional to the internal energy of an ideal gas, but the work W is the amount of energy transferred as the system performs work.

Explanation:

Answer:

1.answer = pushing force

= pulling force

=gravity force

Answer:

d. north pole on the top edge and south pole on the bottom edge

Explanation:

This dissociation occur because:

O had to bond with H due to the Hydrogen bonding rule, which will form OH~ (Hydroxide).

K is more attracted to Hydroxide than Cl, so it will depart Cl and bond with OH~.

that leaves a H and a Cl, which one has a positive charge and the other has a negative, so they will bond and form Hydrochloric Acid.

Answer:

2.01

Explanation:

First, let's convert grams to moles

(Na) 22.99 + (F) 18.998 = 41.988

Every mole of NaF is  41.988 grams

21/41.988 = 0.500143 moles of NaF

For every Cr+3, we will need 2 NaF, so Cr+3 will be half of NaF

0.500143/2 = 0.250071

molarity = moles/liters

0.250071/0.125 = 2.0057 M

Answer:

A substance that dissociates into ions in solution acquires the capacity to conduct electricity. Sodium, potassium, chloride, calcium, magnesium, and phosphate are examples of electrolytes.

Answer From Gauth Math

The third quantum number (m) describes the specific orbital within a sublevel. The correct answer is option D.

Quantum numbers are a set of four numbers that describe the properties of an electron in an atom. They specify the energy, position, and orientation of an electron in an atom.

The third quantum number (m) is also called the magnetic quantum number. It describes the orientation of the orbital in space. Each orbital within a sublevel has a different orientation in space, and the magnetic quantum number tells us which orbital we are talking about.

The value of m can range from -l to +l, where l is the second quantum number (the angular momentum quantum number). The value of l determines the number of orbitals in a sublevel, and the value of m determines the specific orbital within that sublevel.

In conclusion, the third quantum number (m) describes the specific orbital within a sublevel. It tells us how the orbital is oriented in space, and it can have values ranging from[tex]\rm -l \ to +l[/tex], where l is the second quantum number.

Option D is the correct answer.

Learn more about quantum number here:

https://brainly.com/question/32116992

#SPJ4

Answer:

Explanation:

B.

by breaking the bonds between atoms in molecules

Explanation:

Since Kc is

[tex]k = \frac{(products)}{(reactants)} [/tex]

You can insert the Hydrogen and Iodine gas on top, and Hydrogen Iodide in the denominator.

Note: you can only include gases and aqueous species in an equilibrium expression, and all the species in this reaction are gaseous so you're good.

Inserting their molarity at equilibrium into their places, and you can solve. Don't forget to make the coefficient of HI turn into a power.

Answer:

8 CO₂(g)

Explanation:

just took the exam

A general exponential expression is something like:

A^n

This means that we need to multiply the number A by itself n times.

Using that we will get (-2)^6 = 64

With that definition, we can rewrite:

(-2)^6 = (-2)*(-2)*(-2)*(-2)*(-2)*(-2)

So we just need to solve the above expression.

Also, remember the rule of signs:

(-)*(-) = (+)

We will get:

(-2)*(-2)*(-2)*(-2)*(-2)*(-2) =  [(-2)*(-2)]*[(-2)*(-2)]*[(-2)*(-2)]

                                        =  4*4*4 = 16*4 = 64

Then we got:

(-2)^6 = 64

If you want to learn more, you can read:

https://brainly.com/question/17172630

a)

HSO₃⁻ + OH⁻ → H₂SO₄⁽²⁻⁾

In this reaction, we know that OH will act as a base. which means that the bisulfite ion will act as an acid

also because SO₃⁽²⁻⁾ will be relative more stable than O⁽²⁻⁾ because of larger valence shell. so HSO₃ will protonate. making it the acid

b)

HSO₃⁻ + H₃O⁺ → H₂SO₃

Here, the hydronium ion will be the one to protonate because that will help it form water, which is a much stabler compound

so the hydronium ion will protonate, making it the acid and the bisulfite will take that proton, making it the base

From  the information given;

To determine the mass flow rate, let's start by understanding some concepts and parameters.

The power is known to be the energy per unit of time. Mathematically, it can be written as:

[tex]\mathbf{Power = \dfrac{Energy}{Time}}[/tex]

[tex]\mathbf{P =\dfrac{E_p}{time}}[/tex]

[tex]\mathbf{P =\dfrac{m\times g\times z}{time}}[/tex]

where;

Thus;

[tex]\mathbf{E_p}[/tex] = m × 9.81 m/s² × 50 m

[tex]\mathbf{E_p}[/tex] = m × 490.5 (m²/s²)

Recall that:

∴

[tex]\mathbf{E_p}[/tex] = 0.91 × 490.5m (m²/s²)

[tex]\mathbf{E_p}[/tex] = 446.355m (m²/s²)

Since the resulting power transmission is said to be 8%

Then;

the loss in the power transmission (P) = 100% - 8% ×  446.355m (m²/s²)

the loss in the power transmission (P) = 92%  ×  446.355m (m²/s²)

the loss in the power transmission (P) = 0.92  ×  446.355m (m²/s²)

the loss in the power transmission (P) =  410.65m (m²/s²)

Finally;

P = 410.65m (m²/s²)

[tex]\mathbf{P = 410.65 \times m (\dfrac{m^2}{s^2})}[/tex]

replacing the values, we have:

[tex]\mathbf{200 = 410.65 \times m (\dfrac{m^2}{s^2})}[/tex]

[tex]\mathbf{m = \dfrac{200 watt}{410.65\times (\dfrac{m^2}{s^2})}}[/tex]

[tex]\mathbf{m = \dfrac{200 \dfrac{J}{s}}{410.65\times (\dfrac{m^2}{s^2})}}[/tex]

since 1 J/s = 1 kgm²/s²)

Then:

[tex]\mathbf{m = \dfrac{200 \dfrac{\dfrac{kg\times m^2}{s^2}}{s}}{410.65\times (\dfrac{m^2}{s^2})}}[/tex]

[tex]\mathbf{m = \dfrac{200 \ {kg}}{410.65 \ s}}[/tex]

mass flow rate of the water (m) = 0.487 kg/s

Therefore, we can conclude that the mass flow rate of the water required to power a 200 W bulb light is 0.487 kg/s

Learn more about the hydroelectric plant here:

https://brainly.com/question/2635539?referrer=searchResults

Answer:

D. Acetone is captured and cooled.

The correct answer is option D: Acetone is captured and cooled.

Distillation is a method of separation based on the difference in boiling point of two liquids.

The liquid that has a lower boiling point is first separated from the mixture. It vaporizes, cooled and collected before the liquid that has a higher boiling point.

In this case, acetone is captured and cooled before water since it has a boiling point of 56ºC and water has a boiling point of 100ºC.

https://brainly.com/question/15187318