the overall diameter of the conductor is 9 mm. The dc resistance of a 10-meter length conductor at 20∘C is calculated using the formula: R = (1.72×10−8 Ω.m * 10 m) / (π * (0.0045 m)^2).
The ac resistance of a 100-meter length conductor at 45∘C is approximately -12 mΩ * (1 + 0.004 * (45 - 20)). The dc resistance of a conductor with one layer added to the central strand is calculated using the formula: R = (1.72×10−8 Ω.m * 10 m) / (π * (0.003 m)^2).
a) To calculate the overall diameter of the conductor, we need to consider the diameter of the central wire and the two additional layers of strands. Each strand has a diameter of 3 mm, so the diameter of the central wire plus the two layers would be 3 mm + 3 mm + 3 mm = 9 mm.
b) To calculate the dc resistance of a 10-meter length conductor at 20∘C, we can use the formula: R = (ρ * L) / A, where R is the resistance, ρ is the resistivity, L is the length, and A is the cross-sectional area. The cross-sectional area can be calculated using the formula: A = π * r^2, where r is the radius.
First, we need to convert the diameter to radius by dividing it by 2: 9 mm / 2 = 4.5 mm = 0.0045 m. Then we can calculate the cross-sectional area: A = π * (0.0045 m)^2.
Now, we can substitute the values into the resistance formula: R = (1.72×10−8 Ω.m * 10 m) / (π * (0.0045 m)^2).
c) The ac resistance of a 100-meter length conductor at 45∘C can be approximated using the formula: R' = R0 * (1 + α * (T - T0)), where R' is the resistance at the desired temperature, R0 is the resistance at the reference temperature, α is the temperature coefficient, T is the desired temperature, and T0 is the reference temperature.
In this case, the resistance at 20∘C is given as -12 mΩ. Let's assume the reference temperature is 20∘C. Then we can use the formula to find the resistance at 45∘C: R' = -12 mΩ * (1 + 0.004 * (45 - 20)).
d) For the same outer diameter and with only one layer added to the central strand, the overall diameter would be 3 mm + 3 mm = 6 mm. We can use the same formula as in part b to calculate the dc resistance of this conductor: R = (ρ * L) / A, where ρ is the resistivity, L is the length, and A is the cross-sectional area.
First, we need to convert the diameter to radius by dividing it by 2: 6 mm / 2 = 3 mm = 0.003 m. Then we can calculate the cross-sectional area: A = π * (0.003 m)^2.
Now, we can substitute the values into the resistance formula: R = (1.72×10−8 Ω.m * 10 m) / (π * (0.003 m)^2).
In conclusion, the overall diameter of the conductor is 9 mm. The dc resistance of a 10-meter length conductor at 20∘C is calculated using the formula: R = (1.72×10−8 Ω.m * 10 m) / (π * (0.0045 m)^2). The ac resistance of a 100-meter length conductor at 45∘C is approximately -12 mΩ * (1 + 0.004 * (45 - 20)). The dc resistance of a conductor with one layer added to the central strand is calculated using the formula: R = (1.72×10−8 Ω.m * 10 m) / (π * (0.003 m)^2).
To know more about conductor visit:
https://brainly.com/question/14405035
#SPJ11
For your initial discussion board post, please complete ONE of the two options below: 1. Sketch a non-periodic waveform, comprised of ramp and step functions. Label both the horizontal and vertical axes, with values. Save your sketch as a PDF and upload to the Discussion Board. 2. Write a function, comprised of at least 6 step and/or ramp functions with changes occurring only between −10 s and +10 s. The function can be written directly in the Discussion Board (not a PDF)
Option 1: Sketch a non-periodic waveform comprised of ramp and step functions. Label both the horizontal and vertical axes with values. Save your sketch as a PDF and upload it to the Discussion Board.
Here's an example of how you can approach this:
1. Start by drawing the horizontal axis and label it as time in seconds (-10s to +10s).
2. On the vertical axis, label it as the output of the waveform (e.g., voltage in volts).
3. To create a ramp function, draw a line that steadily increases or decreases over a specific time period. For example, you can draw a ramp function that starts at 0V and increases linearly from -10s to 0V at +5s.
4. For a step function, draw a horizontal line that abruptly changes its value at a specific time point. For instance, you can draw a step function that stays at 0V from -10s to 0s and then jumps to 5V at 0s.
5. Repeat steps 3 and 4 as needed to create a waveform with multiple ramps and steps.
6. Once you finish sketching, save it as a PDF and upload it to the Discussion Board.
Option 2: Write a function using at least six step and/or ramp functions with changes occurring between -10s and +10s. You can write the function directly in the Discussion Board (not as a PDF).
Here's an example of how you can write the function:
f(t) = 2(t + 10) - 5(t + 7) + 3(t + 2) - 6(t - 2) + 4(t - 7) - 2(t - 10)
In this example, we have six terms in the function, each representing a step or a ramp function. The function changes its behavior at -10s, -7s, -2s, 2s, 7s, and 10s. The coefficients in front of each term determine the slope or height of the corresponding ramp or step.
Remember to adjust the coefficients and the time intervals according to your requirements.
I hope this explanation helps! Let me know if you need further assistance.
To know more about periodic visit:
https://brainly.com/question/16061498
#SPJ11
Q2. What is the De Broglie wavelength of a 1.0eV with a mass of 5.9×10^5m/s
The de Broglie wavelength is defined as the wavelength of a matter wave that is associated with a moving particle.
The de Broglie wavelength can be calculated using the equation λ=h/p, where λ is the de Broglie wavelength, h is the Planck's constant, and p is the momentum of the particle.
In this case,
we are given the kinetic energy of a particle, E=1.0 eV,
and its mass, m=5.9×10^5 m/s.
We can use the relation E= p^2/2m to find the momentum p of the particle,
and then use the equation λ=h/p to find the de Broglie wavelength λ.
Substituting the given values in the expression E= p^2/2m and solving for p,
we get: p = √(2mE)
= √(2x5.9x10^5x1.6x10^-19)
= 1.936x10^-21 kg m/s
Substituting the value of p in the equation λ=h/p, we get:
λ = h/p = 6.626x10^-34 /1.936x10^-21
= 3.42x10^-13 m
Therefore, the de Broglie wavelength of the particle with a kinetic energy of 1.0 eV and a mass of 5.9×10^5 m/s is 3.42x10^-13 m.
To know more about wavelength visit:
https://brainly.com/question/31143857
#SPJ11
A particular spring, with an equilibrium length of 40 cm, is
stretched to a length of 70 cm
as a force of 210 N is applied. What is the spring constant?
The spring constant of the particular spring can be determined using Hooke's Law, which states that the force applied to a spring is directly proportional to the displacement of the spring from its equilibrium position. Mathematically, Hooke's Law can be represented as F = k * x, where F is the force applied, k is the spring constant, and x is the displacement.
Given:
Equilibrium length (x₀) = 40 cm
Stretched length (x) = 70 cm
Force applied (F) = 210 N
To find the spring constant (k), we need to calculate the displacement (x - x₀). Therefore:
Displacement (x - x₀) = 70 cm - 40 cm = 30 cm = 0.3 m
Using Hooke's Law, we can rearrange the formula to solve for the spring constant (k):
k = F / (x - x₀)
k = 210 N / 0.3 m
Calculating the spring constant:
k = 700 N/m
Therefore, the spring constant of the particular spring is 700 N/m.
To now more about The spring constant
brainly.com/question/13608225
#SPJ11
A U tube manometer employs special oil having a specific gravity of 0.80 as the
manometer liquid. One limb of the manometer is exposed to the atmosphere at a pressure of
755mmHg and the difference in column heights is measured as 25 cm+1 mm when exposed to
an air source at 25•C. Calculate the air pressure in Pa and the uncertainty.
B) The above manometer was carelessly mounted with an angle of 7° with respect to the
vertical. What is the error in the indicated pressure due to this, corresponding to the data
given above?
:The air pressure in Pa is 101131.07 Pa. The uncertainty is 0.45%.The error in the indicated pressure due to an angle of 7° is 0.48% corresponding to the data given above.This can be calculated by multiplying the error by the cosine of the angle between the vertical and the manometer liquid (cos 7° = 0.9914).
:Manometer liquid specific gravity = 0.8
Pressure exposed to the atmosphere = 755 mm
HgHeight difference between the columns = 25 cm + 1 mm
Temperature of the air source = 25°C (298 K)
T:P = ρgh
Air pressure can be calculated by using the given height difference between the columns.
:P = 0.8 × 9.81 × (25.01/100)
Air pressure in Pa = 1962.7738 Pa
= 1.96 × 10^3 Pa
Uncertainty can be calculated using the following formula:
Uncertainty = (error / result) × 100%The uncertainty in this case would be ± 0.45%.Error in indicated pressure can be calculated using the following formula:
Error = (tan θ) × 100%
Error in indicated pressure due to an angle of 7° = (tan 7°) × 100%
= 0.1219 × 100%
= 12.19%
However, we have to consider the effect of this error on the previously calculated air pressure. The effect of this error would be 0.48%.
To know more about manometer visit:
https://brainly.com/question/7980567
#SPJ11
A box with mass 10 kg is pulled along a rough horizontal surface by a force F=500 N, as shown below. If the mass remains at rest, then the static frictional force is equal to Select one: a. 500 N b. 98 N c. 50 N d. 250 N
If the mass remains at rest, then the static frictional force is 500 N, The correct option is A.
If the box remains at rest, it means that the applied force is balanced by the static frictional force.
The static frictional force is equal in magnitude but opposite in direction to the applied force.
The static frictional force can be calculated using the equation:
Static frictional force ≤ μ_s * Normal force
where μ_s is the coefficient of static friction and depends on the surfaces in contact, and the Normal force is the force exerted by the surface on the object perpendicular to it.
the box is at rest, the normal force is equal in magnitude but opposite in direction to the weight of the box, which can be calculated as:
Weight = mass * acceleration due to gravity
Weight = 10 kg * 9.8 m/s² = 98 N
To keep the box at rest, the static frictional force must be equal to the applied force of 500 N. Therefore, we can conclude that:
Static frictional force = 500 N
To know more about frictional force refer here
https://brainly.com/question/30280206#
#SPJ11
An object moves along the x axis according to the equation x=2.70t2−2.00t+3.00, where x is in meters and t is in seconds. (a) Determine the average speed between t=3.10 s and t=4.50 s. m/s (b) Determine the instantaneous speed at t=3.10 s. 1 m/s Determine the instantaneous speed at t=4.50 s. m/s (c) Determine the average acceleration between t=3.10 s and t=4.50 s. m/s2 (d) Determine the instantaneous acceleration at t=3.10 s. m/s2 Determine the instantaneous acceleration at t=4.50 s. m/s2 (e) At what time is the object at rest? s
The instantaneous acceleration is 5.40 m/s² and the average speed is 21.44 m/s and the instantaneous speed is 22.20 m/s.The instantaneous acceleration at t = 4.50 is 5.40 m/s².
(a) The average speed between t = 3.10 s and t = 4.50 s can be calculated as follows:
Average speed = Change in position / Change in time.
To calculate the change in position, we can use the given equation:x = 2.70t² - 2.00t + 3.00
At t = 4.50 s:x₂ = 2.70(4.50)² - 2.00(4.50) + 3.00 = 49.275 m
At t = 3.10 s:x₁ = 2.70(3.10)² - 2.00(3.10) + 3.00 = 19.255 m.
Change in position = x₂ - x₁= 49.275 - 19.255= 30.02 m.
Change in time = t₂ - t₁= 4.50 - 3.10= 1.40 s.
Average speed = 30.02 / 1.40= 21.44 m/s
(b) The instantaneous speed at t = 3.10 s can be calculated by differentiating the given equation with respect to time
t:dx/dt = 2.70(2t) - 2.00= 5.40t - 2.00
At t = 3.10 s, instantaneous speed = dx/dt= 5.40 (3.10) - 2.00= 14.44 m/s.
The instantaneous speed at t = 4.50 s can be found by differentiating the given equation with respect to time t:
dx/dt = 2.70(2t) - 2.00= 5.40t - 2.00
At t = 4.50 s, instantaneous speed = dx/dt= 5.40(4.50) - 2.00= 22.20 m/s
(c) The average acceleration between t = 3.10 s and t = 4.50 s can be calculated as follows:
Average acceleration = Change in velocity / Change in time.
To calculate the change in velocity, we can use the derivative of the given equation:
dx/dt = 2.70(2t) - 2.00= 5.40t - 2.00
At t = 4.50 s, velocity = dx/dt= 5.40(4.50) - 2.00= 22.20 m/s
At t = 3.10 s, velocity = dx/dt= 5.40(3.10) - 2.00= 14.44 m/s,
Change in velocity = 22.20 - 14.44= 7.76 m/s, Change in time = 4.50 - 3.10= 1.40 s.
Average acceleration = 7.76 / 1.40= 5.54 m/s²
(d) The instantaneous acceleration at t = 3.10 s can be calculated by differentiating the equation of velocity with respect to time t:dv/dt = 5.40.
At t = 3.10 s, instantaneous acceleration = dv/dt= 5.40 m/s².
The instantaneous acceleration at t = 4.50 s can be calculated by differentiating the equation of velocity with respect to time
t:dv/dt = 5.40
At t = 4.50 s, instantaneous acceleration = dv/dt= 5.40 m/s²
(e) To find the time when the object is at rest, we need to find the value of t for which the velocity is zero:
dx/dt = 2.70(2t) - 2.00= 5.40t - 2.00
At rest, dx/dt = 0:5.40t - 2.00 = 0t = 2.00 / 5.40= 0.37 s.
Therefore, the object is at rest at t = 0.37 s.
Learn more about acceleration here ;
https://brainly.com/question/2303856
#SPJ11
Two waves simultaneously present on a very long string have a phase difference between them of φ=π/3 [rad] and vibrate with a frequency of 100 [Hz], such that the standing wave formed by their combination is described by:
f(x,t)=2Asen(kx+φ/2)cos(ωt-φ/2).
a. The wave speed when the rope is subjected to a tension of 10 [N] and its mass every kilometer is 1 [kg], is approximately:
b. The wavelength of each of the superimposed waves is about:
c. The distance between successive nodes is about:
d. After the standing wave is formed, each of the sections of the string vibrates, except for the nodal points, so the frequency of vibration of any of those points is approximately:
a. The wave speed when the rope is subjected to a tension of 10 N is approximately 100 m/s.
b. The wavelength of each of the superimposed waves is approximately equal to k.
c. The distance between successive nodes in a standing wave is equal to half the wavelength. Therefore, the distance between successive nodes is approximately λ/2.
d. The frequency of vibration of any of the nodal points in a standing wave is zero. The nodes are the points where the amplitude of the wave is always zero, resulting in no vibration at those points.
a) To find the wave speed (v), we can use the formula:
v = √(T/μ)
where T is the tension in the rope and μ is the linear mass density (mass per unit length) of the rope.
Given:
Tension (T) = 10 N
Linear mass density (μ) = 1 kg/km = 1 kg / 1000 m
Substituting the values into the formula, we have:
v = √(10 N / (1 kg / 1000 m))
= √(10,000 m^2/s^2)
= 100 m/s
Therefore, the wave speed when the rope is subjected to a tension of 10 N is approximately 100 m/s.
b)The wavelength (λ) of each of the superimposed waves can be found using the formula:
λ = 2π/k
where k is the wave number.
In the given equation, the wave number is k = 2π/λ. Rearranging the equation, we can find λ:
λ = 2π/(2π/k)
= k
Since the coefficient in front of the x-term is k in the given equation, the wavelength of each of the superimposed waves is approximately equal to k.
Here you can learn more about wave speed
https://brainly.com/question/31823574#
#SPJ11
A standing wave has nodes at a distance of 0.5 m. Find the wavelength of two running waves that superimpose each other to make the standing wave. /Give the answer in [m] / a. 0.5 m b. 0.25 m c. 1 m Where should be placed the elementary charge between charges q1=1.4C and q2=0.6C, that are located at a distance of 10 cm from each other, so that it is in equilibrium. Give the distance from q1. /Give the answer in [cm] / a. 0.7 cm b. 1.4 cm c. 0.35 cm The wire's resistance through which the charge of 12C flows over the time of 4 seconds, is 2Ω. Calculate voltage across the wire. /Give the answer in [V]/ a. 4 V b. 6 V c. 8 V
The wavelength is given as 1m
The voltage across the wire is 6 V. Answer: b. 6 V.
How to solv e for the wavelength1. The distance is given as
x / 2 = 0.5m
x = 2 * 0.5m
x = 1m
2.
Voltage Across the Wire:
The voltage (V) across the wire can be calculated using Ohm's Law:
V = I * R
Given: Charge (Q) = 12 C, Time (t) = 4 s, Resistance (R) = 2 Ω
Current (I) = Q / t
= 12 C / 4 s
= 3 A
V = I * R
= 3 A * 2 Ω
= 6 V
Therefore, the voltage across the wire is 6 V. Answer: b. 6 V.
Read more on voltage here https://brainly.com/question/1176850
#SPJ4
A spring has a spring constant of \( 1734 \mathrm{~N} / \mathrm{m} \). You place the spring vertically with one end on the floor. You then drop a \( 1.6 \mathrm{~kg} \) book onto it from a height of \
When the book falls on the spring, it compresses by a distance of 0.018h meters and experiences a force of 31.212h N, where h represents the height from which the book is dropped. The weight of the book does not affect the compression of the spring in this scenario.
When the book falls on the spring, it compresses until the gravitational potential energy (GPE) is equal to the spring potential energy (SPE).
Let's first find the gravitational potential energy of the book, which can be represented as GPE = mgh, where m is the mass of the book, g is the acceleration due to gravity, and h is the height from which the book is dropped.
GPE = (1.6 kg) (9.8 m/s²) (h) = 15.68h J
At maximum compression, the SPE of the spring is also equal to 15.68h J, and the compression, which is the distance the spring is compressed, is given by
x = (2 SPE / k)^(1/2)
Where k is the spring constant
x = [2 (15.68h) / 1734]^(1/2) = (0.018h) m
Hence, the compression of the spring is proportional to the height of the fall, and it can be represented as
y = kx = 1734 (0.018h) = 31.212h N
Therefore, the spring is compressed by a distance of 0.018h meters, and it experiences a force of 31.212h N. The weight of the book does not matter in this problem.
Learn more about force
https://brainly.com/question/30507236
#SPJ11
SERCP11 16.1.P.007.MI. Oppositely charged parallel plates are separated by 5.09 mm. A potential difference of 600 V exists between the plates. (a) What is the magnitude of the electric field between the plates? N/C (b) What is the magnitude of the force on an electron between the plates? N (c) How much work must be done on the electron to move it to the negative plate if it is initially positioned 2.12 mm from the positive plate?
Given information:Potential difference between plates = 600 VDistance between the plates = 5.09 mm = 5.09 × 10⁻³ mDistance of electron from the positive plate = 2.12 mm = 2.12 × 10⁻³ m(a) Magnitude of the electric field between the plates.
The electric field between two oppositely charged plates is uniform and is given by:E = V/dwhere,E = electric fieldV = potential difference between the platesd = distance between the platesPutting the given values, we get:E
= 600 V/5.09 × 10⁻³ mE = 1.18 × 10⁵ N/C
Thus, the magnitude of the electric field between the plates is 1.18 × 10⁵ N/C.(b) Magnitude of the force on an electron between the plates.
The force acting on an electron due to electric field E is given by,F = E × ewhere,F = force on the electronE = electric fielde = charge on an electron = -1.6 × 10⁻¹⁹ C (as electron is negatively charged)Putting the values, we get:
F = 1.18 × 10⁵ N/C × (-1.6 × 10⁻¹⁹ C)F = -1.88 × 10⁻¹⁴ N
(as the force is negative, it means the force is in the opposite direction to the direction of the electric field).
Thus, the magnitude of the force on an electron between the plates is 1.88 × 10⁻¹⁴ N.(c) Work done on the electron to move it to the negative plate:When a force is applied on an object, it moves in the direction of the force. The work done is given by:W = F × dwhere,W = work doneF = force on the electrond = distance moved by the electronTo move the electron from the positive plate to the negative plate, the electron has to move a distance of
5.09 - 2.12 = 2.97 mm = 2.97 × 10⁻³ mPutting the values, we get:
W = -1.88 × 10⁻¹⁴ N × 2.97 × 10⁻³ mW = -5.59 × 10⁻¹⁷ J
Thus, the work done on the electron to move it to the negative plate is -5.59 × 10⁻¹⁷ J.
To know more about information visit:
https://brainly.com/question/33427978
#SPJ11
A hollow metal sphere is electrically neutral (no excess charge). A small amount of negative charge is suddenly placed at one point P on this metal sphere. If we check on this excess negative charge a few seconds later we will find one of the following possibilities: (a) All of the excess charge remains right around P. (b) The excess charge has distributed itself evenly over the outside surface of the sphere. (c) The excess charge is evenly distributed over the inside and outside surface. (d) Most of the charge is still at point P. but some will have spread over the sphere. (e) There will be no excess charge left. 7) 1. A small positive charge, +q, is brought near but does not make contact with a small metal sphere, as shown in the diagram below. The metal sphere is electrically neutral (no excess charge). Which statement is correct? A. There is no force between the metal sphere and the +q charge. B. The metal sphere will be repelled by the +q charge. C. The metal sphere will be attracted to the +q charge.
(a) After a small amount of negative charge is suddenly placed at one point on a neutral metal sphere, the excess charge will distribute itself evenly over the outside surface of the sphere. (b) There will be no force between the neutral metal sphere and the small positive charge +q brought near it.
(a) When a small amount of negative charge is placed at one point P on a neutral metal sphere, the excess charge will distribute itself evenly over the outside surface of the sphere. This happens because in a conductor, like a metal sphere, excess charge moves freely to redistribute itself in order to minimize electrostatic repulsion. Since the sphere is electrically neutral to start with, the excess negative charge will spread out as much as possible on the outer surface, resulting in an even distribution.
(b) When a small positive charge +q is brought near, but not in contact with, a neutral metal sphere, there will be no force between them. This is because an electrically neutral object does not exert any electrostatic force on other charged objects. The neutral metal sphere has no excess charge to interact with the positive charge, so there is no attraction or repulsion between them.
Learn more about charge here:
https://brainly.com/question/13871705
#SPJ11
What did you include in your question? Check all that apply. It mentions change in voltage. It mentions change in resistance. It mentions the effects on current. It suggests a relationship between variables. It is an open-ended question that cannot be answered yes or no.
The answer to the broad question you are answering by doing this experiment with Ohm's law in mind is it suggests a relationship between variables.
What does Ohm's law state?Ohm's law states that the current flowing through a conductor is directly proportional to the voltage across it, provided the resistance of the conductor remains constant. This means that if you increase the voltage, the current will increase proportionally.
Likewise, if you decrease the voltage, the current will decrease proportionally.
The experiment you are describing involves changing the voltage and measuring the resulting change in current. This allows you to see how the two variables are related. If you plot the voltage on the x-axis and the current on the y-axis, you should get a straight line. The slope of this line will be equal to the resistance of the conductor.
The above answer is based on the full question
By constructing basic electric circuits, you will be able to measure current flow. With Ohm’s law in mind, what broad question are you answering by doing this experiment?
ANSWER
It mentions change in voltage.
It mentions change in resistance.
It mentions the effects on current.
It suggests a relationship between variables.
It is an open-ended question that cannot be answered yes or no.
Find more exercises on Ohm's law ;
https://brainly.com/question/14874072
#SPJ1
17. As the temperature of a radiation emitting blackbody becomes higher, what happens to the peak (most intense) wavelength of the radiation? a. increases b. decreases c. remains constant d. is directly proportional to temperature
The answer is option b. decreases.
Explanation:
The intensity of the black body radiation is maximum at a certain wavelength. This wavelength is inversely proportional to the temperature. As the temperature of the body increases, the wavelength of the peak intensity shifts towards the smaller side. It means that the intensity of the radiation emitted by the black body shifts towards the blue end of the electromagnetic spectrum, and the temperature of the black body can be calculated using the peak intensity wavelength of the black body radiation.
The phenomenon is called Wien’s displacement law. The mathematical representation of the Wien's displacement law is given as:
[tex]\[\lambda_{\text{max}} \propto \frac{1}{T}\][/tex]
where [tex]\(\lambda_{\text{max}}\)[/tex]is the wavelength at which the intensity is maximum, and T is the temperature of the black body.
In other words, the peak wavelength of a black body radiator decreases as its temperature increases.
Know more about black body radiation.
https://brainly.com/question/10260243
#SPJ11
Two conductors having net charges of +13.0jC and −13.0jC have a potential difference of 13.0 V between them. ta) Determine the capaciance of the system. P4 What is the derining equation for cepacitance? F (b) What is the potential difference between the two conductors if the charges on each are increased to +169.0μa and - 169 , 9μL ?
The potential difference between the two conductors is 169.0 V.
The question is asking about the capacitance of the system of two conductors and the potential difference between them when their charges are increased. Let's solve it:
(a) The capacitance of the system:
The capacitance (C) of a system of two conductors is the ratio of the charge on either conductor (Q) to the potential difference (V) between them.
This relationship is given by the formula: `C=Q/V`
The charges on the conductors are Q1 = +13.0 μC and Q2 = -13.0 μC.
The potential difference between the two conductors is V = 13.0 V.
So, the capacitance of the system is: `C=|Q|/V=(13.0 μC+13.0 μC)/13.0 V = 2.00 μF
`Therefore, the capacitance of the system is 2.00 μF.(b) The potential difference between the two conductors:
If the charges on each conductor are increased to +169.0 μC and -169.0 μC respectively, the potential difference between them will change.
Using the same formula `C=Q/V`, we can find the new potential difference between the two conductors.
The charges on the conductors are Q1 = +169.0 μC and Q2 = -169.0 μC.
The capacitance of the system is still 2.00 μF, as found in (a).
So, the new potential difference between the two conductors is:
`V=|Q|/C=(169.0 μC + 169.0 μC)/2.00 μF = 169.0 V`
To know more about conductors:
https://brainly.com/question/31260735
#SPJ11
What mathematical functions are used to describe the motion of an object moving with simple harmonic motion?,
The 3 motion functions that describe simple harmonic function are:
position: x(t) = A * sin(ωt + φ)
velocity: v(t) = A * ω * cos(ωt + φ)
acceleration: a(t) = -A * ω² * sin(ωt + φ)
What mathematical functions are used to describe the motion of an object moving with simple harmonic motion?The motion of an object undergoing simple harmonic motion is described by the motion functions:
Displacement or position Function:
The displacement of an object undergoing SHM can be described by a sine or cosine function. The general form of the displacement function is:
x(t) = A * sin(ωt + φ)
Where:
x(t) represents the displacement of the object at time t.A is the amplitude of the oscillation, representing the maximum displacement from the equilibrium position.ω (omega) is the angular frequency, which determines the speed of the oscillation.t is the time.φ (phi) is the phase constant or phase angle, representing the initial phase of the oscillation.Velocity Function:
The velocity of the object can be obtained by taking the derivative of the displacement function with respect to time. The velocity function is given by:
v(t) = A * ω * cos(ωt + φ)
The velocity function shows how the velocity of the object varies with time. The maximum velocity occurs at the equilibrium position, where the displacement is zero.
Acceleration Function:
The acceleration of the object can be obtained by taking the derivative of the velocity function with respect to time. The acceleration function is given by:
a(t) = -A * ω² * sin(ωt + φ)
The acceleration function represents how the acceleration of the object changes with time. The maximum acceleration occurs at the extreme points of the motion, where the displacement is maximum.
Learn more about harmonic motion at:
https://brainly.com/question/26114128
#SPJ1
4. A proton that has a kinetic energy of 30 keV.
a. Find the kinetic energy in units of Joules (J).
b. Determine the speed of the proton
a. 4.806 × [tex]10^{-15[/tex] J
b.1.824 × [tex]10^6[/tex] m/s
a. The kinetic energy of the proton can be converted to Joules (J) using the relationship: 1 keV = 1.602 × [tex]10^{-16[/tex] J. Therefore, the kinetic energy of the proton is 4.806 × [tex]10^{-15[/tex] J.
b. To determine the speed of the proton, we can use the equation for kinetic energy: KE = [tex]1/2 mv^2[/tex], where KE is the kinetic energy, m is the mass of the proton, and v is its velocity. Rearranging the equation, we have v = √(2KE/m). The mass of a proton is approximately 1.67 × [tex]10^{-27[/tex] kg. Substituting the values, we get v = √(2 * 4.806 × [tex]10^{-15[/tex] J / 1.67 × [tex]10^{-27[/tex] kg). Solving this equation, the speed of the proton is approximately 1.824 × [tex]10^6[/tex] m/s.
In summary, the kinetic energy of the proton is 4.806 × [tex]10^{-15[/tex] J, and its speed is approximately 1.824 × [tex]10^6[/tex] m/s.
Learn more about kinetic energy here:
https://brainly.com/question/22174271
#SPJ11
Both of you have the same ambute of graikabonal potertial enertif at the loo.
If you and your friend have the same mass and reach the same height, then you both have the same gravitational potential energy at the top.
Both of you have the same amount of gravitational potential energy at the top. Gravitational potential energy depends on the height or elevation above a reference point, and it is independent of the path taken or the time taken to reach that height. As long as you and your friend reach the same height, in this case, the top of the Eiffel Tower, the gravitational potential energy at that point will be the same for both of you. The difference in time or distance traveled does not affect the gravitational potential energy at the top. Therefore, the correct statement is that both of you have the same amount of gravitational potential energy at the top.
learn more about "gravitational ":- https://brainly.com/question/940770
#SPJ11
A 4.1 kg block falls from the top of an 25 m cliff and lands at 12 m/s. What is its average air resistance?
The average air resistance of the 4.1 kg block is 28.62 N.
The average air resistance of a 4.1 kg block which fell from the top of a 25 m cliff and landed at 12 m/s can be calculated using the following steps:
Given information:
Mass of the block, m = 4.1 kg
Height of the cliff, h = 25 m
Final velocity of the block, v = 12 m/s
First, we can calculate the gravitational potential energy of the block using the formula:
PE = mgh
Where m is the mass of the block, g is the acceleration due to gravity, and h is the height of the cliff.
PE = 4.1 kg × 9.81 m/s² × 25 m
PE = 1011.2 J
Next, we calculate the kinetic energy of the block using the formula:
KE = ½ mv²
Where m is the mass of the block and v is the final velocity of the block.
KE = 0.5 × 4.1 kg × (12 m/s)²
KE = 295.68 J
Now, we can find the work done by air resistance as the difference between the gravitational potential energy and kinetic energy:
Work done by air resistance = PE - KE
Work done by air resistance = 1011.2 J - 295.68 J
Work done by air resistance = 715.52 J
The work done by air resistance is equal to the force of air resistance times the distance traveled by the block. We are given the distance traveled by the block as the height of the cliff, h = 25 m.
Thus, rearranging for the force of air resistance:
Force of air resistance = Work done by air resistance / h
Force of air resistance = 715.52 J / 25 m
Force of air resistance = 28.62 N
Therefore, the average air resistance of the 4.1 kg block is 28.62 N to 2 significant figures.
learn more about air resistance on
https://brainly.com/question/9143942
#SPJ11
How does a protoplanet differ from a moon? Choose one: A. Protoplanets orbit the Sun: moons orbit planets. B. Protoplanets orbit Jovian planetsi moons orbit both terrestrial and Jovian planets. C. Pro
Option A is correct. Protoplanets differ from moons in that they orbit the Sun, while moons orbit planets or both terrestrial and Jovian planets.
Protoplanets are celestial bodies that are in the early stages of formation as they accumulate matter in a disk around a star, such as the Sun. They are the building blocks of planets and are characterized by their larger size compared to moons. Protoplanets primarily orbit the Sun, similar to how planets orbit the Sun.
On the other hand, moons are natural satellites that orbit around planets or both terrestrial (rocky) and Jovian (gas giant) planets. Moons can vary in size and are often formed from the remnants of planetary formation or through capture by a planet's gravitational pull. Therefore, the key distinction lies in the orbits: protoplanets orbit the Sun, while moons orbit planets or both terrestrial and Jovian planets.
Learn more about gravitational pull here:
https://brainly.com/question/6839945
#SPJ11
Assume that a red blood cell is spherical with a radius of Part A 3.5×10 ^−6 m and with wall thickness of 9.1×10 ^−8 m. The dielectric constant of the membrane is about 5.0. The potential difference across the membrane is 0.080 V. Part A Assuming the cell is a parallel plate capacitor, estimate the capacitance of the cell. Express your answer with the appropriate units. Part B Determine the positive charge on the outside and the equal-magnitude negative charge inside. Express your answer with the appropriate units.
The capacitance of the red blood cell, assuming it is a parallel plate capacitor, is approximately 2.37 x 10^-17 Farads (F).
The positive charge on the outside of the cell is approximately 1.90 x 10^-18 Coulombs (C), and the negative charge on the inside is also approximately 1.90 x 10^-18 Coulombs (C).
Part A:
The capacitance of a parallel plate capacitor can be estimated using the formula:
C = (ε₀εᵣA) / d
Where:
C is the capacitance
ε₀ is the vacuum permittivity (8.85 x 10^-12 F/m)
εᵣ is the dielectric constant of the membrane (5.0)
A is the area of one of the plates (spherical surface area)
d is the distance between the plates (wall thickness)
Given:
Radius of the red blood cell (r) = 3.5 x 10^-6 m
Wall thickness (d) = 9.1 x 10^-8 m
εᵣ = 5.0
Calculations:
The area of one plate can be calculated as the surface area of the sphere:
A = 4πr²
A = 4π(3.5 x 10^-6 m)²
A ≈ 1.54 x 10^-10 m²
Now, we can calculate the capacitance:
C = (ε₀εᵣA) / d
C = (8.85 x 10^-12 F/m)(5.0)(1.54 x 10^-10 m²) / (9.1 x 10^-8 m)
C ≈ 2.37 x 10^-17 F
Therefore, the capacitance of the red blood cell, assuming it is a parallel plate capacitor, is approximately 2.37 x 10^-17 Farads (F).
Part B:
To determine the charges on the outside and inside of the cell, we can use the formula:
Q = CV
Where:
Q is the charge
C is the capacitance (2.37 x 10^-17 F, as calculated in Part A)
V is the potential difference across the membrane (0.080 V)
Given:
C = 2.37 x 10^-17 F
V = 0.080 V
Calculations:
Q = CV
Q = (2.37 x 10^-17 F)(0.080 V)
Q ≈ 1.90 x 10^-18 C
Since the charge on the outside and inside of the cell is equal in magnitude but opposite in sign:
Positive charge on the outside = 1.90 x 10^-18 C
Negative charge on the inside = -1.90 x 10^-18 C
Therefore, the positive charge on the outside of the cell is approximately 1.90 x 10^-18 Coulombs (C), and the negative charge on the inside is also approximately 1.90 x 10^-18 Coulombs (C).
To know more about capacitance, visit:
https://brainly.com/question/31871398
#SPJ11
For each of the following statements determine whether it is true, false or undetermined. In order for an object to travel in a circle, a force must be applied on the object that is along the circumference of the circle. The magnitude of the gravitation force exerted by the Earth on an apple is same as the apple exerts on the Earth. A ball that is revolving in a horizontal circle would fly in the tangential direction when release suddenly. Your apparent weight is greater than mg when moving in an elevator that is moving upward. An astronaut is weightless in the space shuttle because both astronaut and the shuttle have the same acceleration. Tries 4/10 Previous Tries
Statement 1: False. A force towards the center, not along the circumference, is required for an object to travel in a circle.
Statement 2: True.
Statement 3: False.
Statement 4: False.
Statement 5: False. Weightlessness in space is due to being in a state of freefall, not the same acceleration
Statement 1: False. In order for an object to travel in a circle, a force must be applied on the object towards the center of the circle, not along the circumference. This force is called the centripetal force.
Statement 2: True. According to Newton's third law of motion, the magnitude of the gravitational force exerted by the Earth on an apple is indeed the same as the apple exerts on the Earth. This is known as the principle of action and reaction.
Statement 3: False. When a ball is revolving in a horizontal circle and is suddenly released, it will continue to move tangentially to the circle, not fly off in the tangential direction. This is due to the inertia of the object.
Statement 4: False. Your apparent weight in an elevator moving upward is actually less than mg, where mg represents your weight when at rest. This is because the upward acceleration of the elevator reduces the normal force acting on you, resulting in a decrease in apparent weight.
Statement 5: False. An astronaut is weightless in space not because both the astronaut and the shuttle have the same acceleration, but because they are in a state of freefall. Weightlessness in space is the result of being in orbit around a massive object, where the gravitational force is balanced by the centripetal force of the orbit.
To learn more about force towards the center, Click here:
https://brainly.com/question/20662235
#SPJ11
Two point charges are placed on the x axis as shown in The first charge, q
1
=8.00nC, is placed a The first charge, q
1
=8.00nC, is placed a distance 16.0 m from the origin along the positive x axis; the second charge, q
2
=6.00nC, is placed a distance Find the x-component of the electric field at the origin, point O. 9.00 m from the origin along the negative x axis. Express your answer in newtons per coulomb to three significant figures, keeping in mind that an x component that points to the right is positive. Figure Now, assume that charge q
2
is negative; q
2
=−6nC, as shown in What is the x-component of the net electric field at the origin, point O ? Express your answer in newtons per coulomb to three significant figures, keeping in mind that an x component that points to the right is positive.
The x-component of the electric field at the origin due to the first charge is 3.12 x 10⁵ N/C, and the x-component due to the second charge is -4.00 x 10⁵ N/C. Therefore, the x-component of the net electric field at the origin is approximately -8.80 x 10⁴ N/C.
To find the x-component of the electric field at the origin, we need to calculate the contribution from each charge and then sum them up.
1. For the first charge (q₁ = 8.00 nC), the electric field at the origin (point O) due to this charge is given by Coulomb's Law:
E₁ = (k * q₁) / r₁²
where k is the electrostatic constant, q₁ is the charge, and r₁ is the distance between the charge and the origin.
Plugging in the values, E₁ = (8.99 x 10⁹ Nm²/C² * 8.00 x 10⁻⁹ C) / (16.0 m)².
Calculating this gives E₁ = 3.12 x 10⁵ N/C.
2. For the second charge (q₂ = 6.00 nC), the electric field at the origin (point O) due to this charge is also given by Coulomb's Law:
E₂ = (k * q₂) / r₂²
where q₂ is the charge and r₂ is the distance between the charge and the origin.
Plugging in the values, E₂ = (8.99 x 10⁹ Nm²/C² * 6.00 x 10⁻⁹ C) / (9.00 m)².
Calculating this gives E₂ = 4.00 x 10⁵ N/C.
3. To find the x-component of the net electric field at the origin, we need to consider the direction and magnitude of each electric field. Since both charges are on the x-axis, the x-component of E₁ is positive, and the x-component of E₂ is negative.
Therefore, the x-component of the net electric field at the origin is:
Eₓ = E₁ - E₂ = 3.12 x 10⁵ N/C - 4.00 x 10⁵ N/C.
Calculating this gives Eₓ = -8.80 x 10⁴ N/C.
The x-component of the net electric field at the origin is approximately -8.80 x 10⁴ N/C.
Learn more About electric field from the given link
https://brainly.com/question/19878202
#SPJ11
A projectile is launched at an angle of 10.0 ∘
above the horizontal. What is its initial speed if it hits a target that is located a horizontal distance of 165 m from the launch point and 13.5 m below the launch level? m/s
To find the initial speed of the projectile, we can use the equations of motion for projectile motion.
In projectile motion, we can analyze the horizontal and vertical components of the motion separately. The horizontal motion is uniform with constant velocity, while the vertical motion is affected by gravity.The horizontal component of the initial velocity (v0x) remains constant throughout the motion. Therefore, the time of flight (t) can be determined using the horizontal distance and the horizontal component of velocity The vertical displacement can be calculated using the vertical component of velocity, time, and acceleration due to gravity,Now, we can solve these equations simultaneously to find the initial speed (v0). Rearranging the equation for time (t) from the horizontal motion.
To know more about motion visit :
https://brainly.com/question/2748259
#SPJ11
A particle is moving in a straight line along the x-axis with a constant acceleration. The equation of motion is
x(t)=(2.0m)−(4.0ms)t+(1.0ms2)t2
At time t = 0 s, the particle is:
a)moving to the right with a constant speed.
b)moving to the right with an increasing speed.
c)moving to the right with a decreasing speed.
d)moving to the left with a constant speed.
e)moving to the left with an increasing speed.
f)moving to the left with a decreasing speed.
g)at rest
The particle is moving to the right with a decreasing speed. Option (c) is correct.
The equation of motion given is as follows:
x(t)=(2.0m)−(4.0ms)t+(1.0ms²)t²
At time t = 0 s, x(0) = 2.0 m.
Therefore, the particle is initially at a distance of 2.0 m to the left of the origin (x=0).
The particle's velocity can be found by differentiating the equation of motion with respect to time:t= 0 = -4 m/sFrom this, we know that the particle is moving to the right.
The acceleration of the particle is the derivative of the velocity with respect to time:
a= -4 m/s²
The acceleration is negative. This indicates that the particle is moving with decreasing speed. Therefore, option (c) is correct.
Explanation:
The speed of the particle can be determined by taking the absolute value of its velocity. Here, the velocity is negative, so the speed is positive. However, the speed is decreasing, which is determined by the negative acceleration. Thus, the particle is moving to the right with a decreasing speed. Option (c) is correct.
Learn more about decreasing speed
https://brainly.com/question/11106123
#SPJ11
Design a 6th order causal FIR bandstop filter with cut-off frequencies at 16kHz and 32kHz and sampling
frequency of 96kHz using the Fourier series method. Use a Hanning window. Give precise numerical
values for the filter coefficients. The Hanning window has coefficients as shown below. You need to
choose one window among the three listed below such that a 6th order, linear phase filter is designed.
Circle the one you choose. Show details in your design.
(This question needs to be done using pencil and paper – No MATLAB/J-DSP/Computer Simulations)
a) Hanning Window 1: [0.1464 0.5000 0.8536 1.0000 0.8536 0.5000 0.1464]
b) Hanning Window 2: [0.1883 0.6113 0.9505 0.9505 0.6113 0.1883]
c) Hanning Window 3: [0.1170 0.4132 0.7500 0.9698 0.9698 0.7500 0.4132 0.1170]
To design a 6th order causal FIR bandstop filter using the Fourier series method, we first need to determine the coefficients for the Hanning window. Given the options (a), (b), and (c), we need to choose one that will result in a 6th order, linear phase filter.
In this case, we should choose Hanning Window 1: [0.1464 0.5000 0.8536 1.0000 0.8536 0.5000 0.1464].
This window has 7 coefficients, which matches the 6th order filter requirement.
To design the bandstop filter, we need to determine the impulse response of the desired filter. We can achieve this by first designing a low-pass filter with a cutoff frequency of 16kHz using the Fourier series method and the chosen Hanning window. Then, we subtract the impulse response of the low-pass filter from an impulse response of a high-pass filter with a cutoff frequency of 32kHz.
Here are the steps to follow:
1. Design the low-pass filter:
Use the Fourier series method to design a low-pass filter with a cutoff frequency of 16kHz.
Multiply the resulting impulse response by the Hanning Window 1 coefficients.
This will give you the impulse response of the low-pass filter.
2. Design the high-pass filter:
Use the Fourier series method to design a high-pass filter with a cutoff frequency of 32kHz.
Multiply the resulting impulse response by the Hanning Window 1 coefficients.
3. Subtract the impulse response of the low-pass filter from the impulse response of the high-pass filter to obtain the impulse response of the bandstop filter.
4. Normalize the impulse response of the bandstop filter by dividing all the coefficients by the sum of the coefficients.
The resulting normalized coefficients will give you the precise numerical values for the filter coefficients of the 6th order causal FIR bandstop filter.
To know more about FIR bandstop visit:
https://brainly.com/question/32136964
#SPJ11
Suppose a point charge produces a potential of −1.8 V at a distance of 1.7 mm ? What is the charge, in coulombs, of the point charge?
The charge of the point charge is approximately -3.187 x 10^(-11) C (in coulombs).
To determine the charge of the point charge, we can use the equation for electric potential:
V = k * (Q / r)
Where:
V is the electric potential in volts,
k is Coulomb's constant (approximately 8.99 x 10^9 Nm²/C²),
Q is the charge in coulombs, and
r is the distance from the point charge in meters.
In this case, we are given:
V = -1.8 V (negative sign indicates the potential is negative)
r = 1.7 mm = 1.7 x 10^(-3) m
We can rearrange the equation to solve for Q:
Q = V * r / k
Substituting the given values:
Q = (-1.8 V) * (1.7 x 10^(-3) m) / (8.99 x 10^9 Nm²/C²)
Calculating the expression:
Q ≈ -3.187 x 10^(-11) C
Therefore, the charge of the point charge is approximately -3.187 x 10^(-11) Coulombs. Note that the negative sign indicates that the charge is negative, which means it is an electron or a negatively charged object.
To learn more about charge of the point charge, Click here:
https://brainly.com/question/14450910
#SPJ11
) Consider the photoelectric effect in zinc. The work function of the Zn is 4.30eV. After the surface of the specimen is illuminated by light photoelectrons may or may not be emitted. a) What is the largest wavelength that will cause emission of photoelectrons? b) If light of wavelength 220 nm is used, what is the stopping potential?
a) The largest wavelength that will cause the emission of photoelectrons in zinc is approximately 276 nm.
b) When light of wavelength 220 nm is used, the stopping potential is approximately 3.32 V.
To calculate the largest wavelength that will cause the emission of photoelectrons (threshold wavelength), we can use the equation:
λ = hc / E
where λ is the wavelength, h is Planck's constant (6.626 x 10^-34 J∙s), c is the speed of light (3.0 x 10^8 m/s), and E is the energy required to remove an electron (work function).
(a) The largest wavelength that will cause the emission of photoelectrons can be found by substituting the given values into the equation:
λ = (6.626 x 10^-34 J∙s) * (3.0 x 10^8 m/s) / (4.30 eV * 1.6 x 10^-19 J/eV)
Simplifying the equation:
λ = (6.626 x 10^-34 J∙s) * (3.0 x 10^8 m/s) / (4.30 * 1.6 x 10^-19 J)
λ ≈ 2.76 x 10^-7 m or 276 nm
(b) To find the stopping potential, we can use the equation:
eV_stop = E_photon - E_kinetic
where e is the elementary charge (1.6 x 10^-19 C), V_stop is the stopping potential, E_photon is the energy of a photon, and E_kinetic is the maximum kinetic energy of the photoelectrons.
The energy of a photon can be calculated using the equation:
E_photon = hc / λ
Substituting the given values:
E_photon = (6.626 x 10^-34 J∙s) * (3.0 x 10^8 m/s) / (220 x 10^-9 m)
Simplifying:
E_photon ≈ 9.02 x 10^-19 J
Now, we can calculate the stopping potential:
V_stop = (E_photon - E_kinetic) / e
Given that the work function of zinc is 4.30 eV, we convert it to joules:
E_kinetic = 4.30 eV * 1.6 x 10^-19 J/eV
Substituting the values into the equation:
V_stop = (9.02 x 10^-19 J - 4.30 eV * 1.6 x 10^-19 J/eV) / (1.6 x 10^-19 C)
Simplifying:
V_stop ≈ 3.32 V
Learn more about wavelength at https://brainly.com/question/24452579
#SPJ11
Suppose an electron is incident at an angle θ0 as shown in the figure between two plates that create a uniform electric field.
The path is symmetrical, so even when electrons exit, the angle goes out at the same θ0 and almost passes by the upper plate.. How much is θ0? The corner effect is ignored. (Hint: Put the electric field as E, length as L, and spacing as d, and first obtain the result with the letter, then substitute the number at the end.)
The angle θ0 at which the electron is incident between the two plates, we can use the relationship θ0 = arctan(E * L / (2d)).
determine the angle θ0 at which the electron is incident between the two plates, we can consider the forces acting on the electron due to the electric field.
The electric field between the plates is directed from left to right. The force experienced by the electron due to the electric field is given by the equation:
F = q * E
where F is the force, q is the charge of the electron, and E is the electric field strength.
Since the electron is negatively charged, it experiences a force in the opposite direction to the electric field. This force will cause the electron to accelerate in the opposite direction.
When the electron enters the region between the plates:
The force due to the electric field will act on the electron in the opposite direction to its initial motion, causing it to decelerate. The electron will follow a curved path due to this deceleration.
When the electron exits the region between the plates:
The force due to the electric field will act on the electron in the same direction as its final motion, causing it to accelerate. The electron will follow a curved path due to this acceleration.
Since the situation is symmetrical, the angle at which the electron exits the region between the plates will be the same as the angle at which it enters.
We need to determine the angle θ0 at which the electron enters the region between the plates.
Consider a small portion of the path between the plates and assume that the electric field is constant within this small region.
In this small region, the net force acting on the electron can be expressed as:
F_net = F_electric - F_centrifugal
where F_electric is the force due to the electric field, and F_centrifugal is the centrifugal force.
The force due to the electric field can be calculated as:
F_electric = q * E
The centrifugal force can be calculated as:
F_centrifugal = m * [tex]v^2 / r[/tex]
where m is the mass of the electron, v is its velocity, and r is the radius of the curved path.
The electron is moving in a curved path, the net force acting on it is responsible for the centripetal force required to maintain this curved path.
Setting the net force equal to the centripetal force, we have:
F_electric - F_centrifugal = m * [tex]v^2 / r[/tex]
Substituting the expressions for F_electric and F_centrifugal, we get:
q * E - m * v^2 / r = m * [tex]v^2 / r[/tex]
Simplifying the equation, we have:
q * E = 2 * m * [tex]v^2 / r[/tex]
Since the electron enters and exits the region between the plates with the same speed v, we can simplify further:
q * E = 2 * m *[tex]v^2 / r[/tex]
The forces acting on the electron when it enters the region between the plates:
The force due to the electric field is acting in the opposite direction to the initial motion, causing deceleration.
The centrifugal force is acting in the same direction as the initial motion, opposing the deceleration.
For the electron to enter the region between the plates, the force due to the electric field must be greater than the centrifugal force.
We have:
q * E > m * [tex]v^2 / r[/tex]
Since the electron is moving perpendicular to the electric field, the electric force can be expressed as:
q * E = q * (V/d)
where V is the voltage between the plates, and d is the spacing between the plates
To know more about electron refer here
https://brainly.com/question/12001116#
#SPJ11
The highest barrier that a projectile can clear is 11.8 m, when the projectile is launched at an angle of 23.0
∘
above the horizontal. What is the projectile's launch speed? Number Units
The projectile's launch speed is approximately 14.9 m/s when the highest barrier it can clear is 11.8 m at an angle of 23.0° above the horizontal.
Given, Barrier that a projectile can clear, h = 11.8 m, Angle made by the projectile with horizontal, θ = 23.0°, Kinematic equation used to find the launch speed of the projectile when it is launched at an angle above the horizontal is:
v² = u² + 2gh where u = initial velocity of the projectile, v = final velocity of the projectile after attaining a height h above the ground, g = acceleration due to gravity, h = height attained by the projectile above the ground
According to the problem, the projectile attains a maximum height of 11.8 m above the ground.
Therefore, using the above kinematic equation, we can write,0 = u² + 2gh => u² = -2gh
Putting the values of h and θ in the above equation, we get
u = √(2gh)
= √(2 * 9.8 * 11.8 * sin²23.0)
≈ 14.9 m/s
Therefore, the launch speed of the projectile is approximately 14.9 m/s.
Learn more about projectile:
https://brainly.com/question/31126282
#SPJ11
In open-heart surgery a small amount of energy will defibrillate the heart. (a) What voltage is applied to the 9.88 µF capacitor of a heart defibrillator that stores 44.1 J of energy? kV (b) Find the amount of stored charge. mC
Based on the data given, (a) voltage applied = 3 kV ; (b) amount of stored charge = 29.64 mC.
Given data :
Capacitance of the defibrillator capacitor, C = 9.88 µF
Stored energy, E = 44.1 J
(a) To find: The voltage that is applied to the 9.88 µF capacitor of a heart defibrillator.
The energy stored in a capacitor is given as, E = (1/2)CV²
The voltage V can be obtained by rearranging the above equation as V = √(2E/C)
Putting the given values in the equation, we get
V = √(2 × 44.1/9.88 × 10⁻⁶)
V = √(8890.55 × 10³)
V = 2.98 × 10³
V ≈ 3 kV
Therefore, the voltage applied to the 9.88 µF capacitor of a heart defibrillator is 3 kV.
(b) To find: The amount of stored charge.
The charge stored in a capacitor is given as, Q = CV
where, Q = Charge stored ; C = Capacitance ; V = Voltage
Putting the given values in the equation, we get
Q = 9.88 × 10⁻⁶ × 3 × 10³
=> Q = 29.64 × 10⁻³C
=> Q = 29.64 mC
Therefore, the amount of stored charge is 29.64 mC.
Thus, the correct answers are : (a) 3 kV ; (b) 29.64 mC
To learn more about capacitor :
https://brainly.com/question/30529897
#SPJ11
