The percentage of magnesium chloride in the original mixture is 25.529 %.
What is silver nitrate?Silver nitrate is an organic compound. It is used in treating wounds and infection of the skin.
A 1.0 g mixture of magnesium chloride and sodium nitrate.
The mass of the precipitate is 1.43 g.
Thus, the percentage of magnesium chloride in the original mixture is 25.529 %.
Learn more about silver nitrate
https://brainly.com/question/8071605
#SPJ1
) If 35.0 mL of 1.50 M solution is diluted to 100. mL, what is the concentration of the dilute solution
Answer:
0.53 (sig figs) or 0.525 original answer
Explanation:
If you use the formula (M1)(V2)=(M2)(V2) and plug in the values, you are solving for the missing X, which is the concentration.
How to tell which acid whill have the hightest perceent ionization
We can tell which acid which have the highest percent ionization on the basis of pH value.
What is percent ionization?The % ionized indicates how much of the original chemical has ionized. As a result, we compare the ion concentration in solution to the neutral species' original concentration.
If any acid have a high pH value then they must show high percent ionization because they are strong in nature and show full dissociation.
Hence acids with high pH value will show highest percent ionization.
To know more about percent ionization, visit the below link:
https://brainly.com/question/3229194
#SPJ4
determine the molarity of a solution that contains 7.5 mol of HCL in 350 mL of water
Answer:
21.4 M
Explanation:
7.5 mole / ( 350/1000) = 21.4 M
If 15. 1 ml of the barium hydroxide solution was needed to neutralize a 2. 22 ml aliquot of the perchloric acid solution, what is the concentration of the acid?
The concentration of the 2.22 mL perchloric acid that was neutralized with barium hydroxide is 3.1 M.
What is neutralization?The neutralization is given as the reaction of the acid and the base forming salt. The reaction of 1 mole of barium hydroxide requires 2 moles of perchloric acid to neutralize completely.
The volume of barium hydroxide given was 15.1 mL. The moles of barium hydroxide has been:
[tex]\rm 1000\;mL\; Ba(OH)_2 = 0.2288 \;mol Ba(OH)_2\\\\15.1\;mL\;Ba(OH)_2=0.0034\;mol[/tex]
The moles of perchloric neutralized by 0.0034 mol barium hydroxide will be:
[tex]\rm 1\;mol\;Ba(OH)_2=2\;mol\;HClO_4\\\\\rm 0.0034\;mol\;Ba(OH)_4=0.0069\;mol\;HClO_4[/tex]
The volume of perchloric has been 2.22 mL. The concentration of the acid is given as:
[tex]\rm Concentration=moles\;\times\dfrac{1000}{volume(mL)}\\\\Concentration=0.0069\;mol\;\times\dfrac{1000}{2.22}\\\\Concentration=3.1\;M[/tex]
The concentration of the perchloric acid aliquot is 3.1 M.
Learn more about neutralization, here:
https://brainly.com/question/15347368
#SPJ4
A gem has a mass of 5. 50 g. When the gem is placed in a graduated cylinder containing 9. 500 ml of water, the water level rises to 10. 45 ml
The density in grams per milliliter 7.975.
What is density?Density is the mass of per unit volume. Density is equals to mass into volume.
D = M x V
The mass of a gem is given, M = 5.50
The volume is 10.45 - 9.00 = 1.45
Thus, the density is
D = 5.50 × 1.45 = 7.975
Thus, the density in grams per milliliter is 7.975.
Learn more about density
https://brainly.com/question/19320982
#SPJ4
1: Why are scientific observations important?
Every experiment uses qualitative observations.
Every experiment ends with observations.
Every experiment begins with observations.
Every experiment uses quantitative observations.
2:
What is one way in which a field investigation can differ from a classroom or laboratory experiment?
In field investigations, it is much more difficult to separate your control and experimental groups.
In field investigations, you are usually working with much larger animals than in the lab.
In field investigations, you are always working with microscopic organisms.
In field investigations, it is much easier to separate your control and experimental groups.
3: Qualitative observations are ______.
based on your senses
measurable
often taken using instruments
only made by scientists in a laboratory
4: Which observation is quantitative?
The flower has five petals.
The flower has a thin stem.
The flower is purple.
The flower is tall.
5: Which statements are true about observations? (Select all that apply.)
Lab experiments rely on observations, but field investigations do not.
We naturally make observations about the world around us.
They are statements made based on something seen, noticed, or measured.
Observations are only made in a laboratory setting.
According to the research, scientific observations are important because every experiment begins with observations.
What are observations?It consists of receiving knowledge of the outside world through our senses, it means that we naturally make observations about the world around us and the first step proposed by the scientific method.
Scientific observation, on the other hand, refers to the process of detailing any phenomenon of nature with analytical intent, usually later replicated in a laboratory (experimentation) or controlled environment.
Similarly, there are qualitative observations that are based on the senses, which are generally more subjective, while quantitative observations are more objective, focusing mainly on numbers, for example "the flower has five petals" is a quantitative observation.
Therefore, we can conclude that according to the context, scientific observations are important because every experiment begins with observations.
Learn more about scientific observations here: https://brainly.com/question/24071808
#SPJ1
Answer:
1. Every experiment begins with observations
2.In field investigations, it is much more difficult to separate your control and experimental groups.
3.based on your senses
4.The flower has five petals.
5.We naturally make observations about the world around us.
They are statements made based on something seen, noticed, or measured. (I think 5 is wrong, if it is then sorry guys dont report me, i tried my best.)
Explanation:
You have a big bon fire outside in your back yard . Although it is only 40 degrees F, you and your friends are all warm sitting by the fire. This is
Question 14 options:
An exothermic exchange from radiant energy.
An endothermic exchange from conduction.
An exothermic exchange by conduction.
None of the above are correct
Answer:
An exothermic exchange by conduction
Explanation:
Because the heating system (the bonfire) is what is conducting the energy, and is transferring said energy to it’s surroundings, this is an exothermic exchange.
30 ml of. 150 m cacl2 is added to a 15 ml of. 100 m agno3
The mass of the formed precipitate of AgCl in the reaction is 1.29 grams.
How do we find moles from molarity?Moles (n) of any substance from molarity (M) will be calculated by using the below equation:
M = n/V, where
V = volume in L
Given chemical reaction is:
2AgNO₃(aq) + CaCl₂(aq) → 2AgCl(s) + Ca(NO₃)₂(aq)
From the stoichiometry of the reaction, mole ratio of AgNO₃ to CaCl₂ is 2:1.
0.0015 moles of AgNO₃ = reacts with 1/2×0.0045 = 0.00075 moles of CaCl₂
Here CaCl₂ is the limiting reagent, and formation of precipitate depends on this only.
Again from the stoichiometry of the reaction:
0.0045 moles of CaCl₂ = produces 2(0.0045) = 0.009 moles of AgCl
Mass of 0.009 moles AgCl will be calculated as:
n = W/M, where
W = required massM = molar mass = 143.45 g/molW = (0.009)(143.45) = 1.29g
Hence required mass of precipitate is 1.29 grams.
To know more about moles & molarity, visit the below link:
https://brainly.com/question/24322641
#SPJ4
What is the empirical formula of a compound containing 90 g carbon 11 g hydrogen and 35 g nitrogen
The empirical formula of the compound containing 90 g carbon, 11 g hydrogen and 35 g nitrogen is C₆H₉N₂
Data obtained from the questionCarbon = 90 gHydrogen = 11 gNitrogen = 35 gEmpirical formula = ?How to determine the empirical formulaDivide by their molar mass
C = 90 / 12 = 7.5
H = 11 / 1 = 11
N = 35 / 14 = 2.5
Divide by the smallest
C = 7.5 / 2.5 = 3
H = 11 / 2.5 = 4.4
N = 2.5 / 2.5 = 1
Multiply by 2
C = 3 × 2 = 6
H = 4.4 × 2 ≈ 9
N = 1 × 2 = 2
Thus, the empirical formula of the compound is C₆H₉N₂
Learn more about empirical formula:
https://brainly.com/question/24297883
#SPJ1
If two gases a and b in separate 1 liter containers
The pressure exerted when both gases are put together in a single 1 liter container is 5 atm.
What is pressure?Pressure is the force exerted by any object on another object.
Given that, a and b separate 1 liter containers and exert pressure of 2 atm and 3 atm respectively.
When both gases a and b exert together, the pressure then
2 atm + 3 atm = 5 atm.
Thus, the pressure exerted when both gases are put together in a single 1 liter container is 5 atm.
Learn more about pressure
https://brainly.com/question/12977546
#SPJ4
Write the chemical equation for the follow- ing: "carbon plus oxygen produces carbon dioxide." Label the parts of the equation.
4. An element is a substance made up of two kinds of matter. True or false?
A. true
B. false
Answer:
false
Explanation:
Elements are pure substance. A ball of sodium will only have sodium atoms.
What is AH in the equation AG = AH - TAS
Answer:
option c is the correct answer of given statement in chemistry
Answer: The answer is D. (The other answer is incorrect)
Explanation: AH is just known as enthalpy. Search it up!
If a compound has an empirical formula of znco3 and a molecular mass of 500g/mol, what would be the molecular formula?
Acids generally release h2 gas when they react with
Answer:
Metals
Explanation:
When acids react with metals h2 gas is produced and a salt is formed
eg. Na + HCL ---------- NaCl + H2
Answer:
active metals
Explanation:
a solution with an [OH-] concentration of 1.20 x 10-7M has a pOH and pH of?
Taking into account the definition of pH and pOH, the solution has a pOH of 6.92 and a pH of 7.08.
Definition of pHpH is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance.
The pH is defined as the negative base 10 logarithm of the activity of hydrogen ions, that is, the concentration of hydrogen ions or H₃O⁺:
pH= - log [H⁺]= - log [H₃O⁺]
Definition of pOHSimilarly, pOH is a measure of hydroxyl ions in a solution and is expressed as the logarithm of the concentration of OH⁻ ions, with the sign changed:
pOH= - log [OH⁻]
Relationship between pH and pOHThe following relationship can be established between pH and pOH:
pOH + pH= 14
pOH and pH in this caseA solution has an [OH⁻] concentration of 1.20×10⁻⁷ M. Replacing in the definition of pOH:
pOH= - log (1.20×10⁻⁷ M)
Solving
pOH= 6.92
Then, pH is calculated as:
pH + 6.92= 14
pH= 14 - 6.92
pH= 7.08
Finally, the solution has a pOH of 6.92 and a pH of 7.08.
Learn more about pH and pOH:
brainly.com/question/16032912?referrer=searchResults
brainly.com/question/13557815?referrer=searchResults
#SPJ1
how many moles are in 23.8 g of sulfur dioxide
Answer:
0.371
Explanation:
number of moles = mass / Ar
= 23.8g / 32.1 + (16.0 × 2)
= 0.37129485179 = 0.371 (3 s.f).
hope it helps :)
Identify the atom below.
a.) H
b.) He
c.) Bе
d.) С
Answer:
B. Helium
Explanation:
Correct me if I'm wrong
Concentration required to begin precipitate pbcl2 for pbcl2 ksp=1. 17×10−5
The concentration required to begin to precipitate PbCl2 for PbCl2 is 0.0216 M.
What is molarity?
Molarity is the measure of the concentration of any solute in per unit volume of the solution.
The reaction is [tex]\rm Pb^2^+(aq) + 2Cl^-(aq) \rightarrow PbCl_2(s).[/tex]
The molarity of lead is 0.025 M
The ksp is given 17×10⁻⁵
Now, calculating the concentration
[tex][Pb^2^+] = 0.025 M.\\Ksp = 1.17 \times 10^-^5\\Ksp = [Pb^2^+] \times [Cl^-]^2\\[Cl^-] = \dfrac{\sqrt{ Ksp}}{[Pb^2^+]} \\\\[Cl^-] = \dfrac{\sqrt{ 0.0000117}}{0.025} \\[Cl^-] = 2.16 \times 10^-^2M.[/tex]
Thus, the concentration required to begin to precipitate PbCl2 for PbCl2 is 0.0216 M.
Learn more about molarity
https://brainly.com/question/10725862
#SPJ4
when a solid will not dissolve in a liquid, it is termed___
a. insoluble
b. miscible
c. soluble
d. dissolvable
Answer:
a. insoluble.
Explanation:
This is the opposite of soluble, which means things can dissolve in a liquid, so insoluble means a solid cannot dissolve in a liquid.
Brainliest will really help me!
Substance A reacts spontaneously with substance B at room temperature. Substance A reacts with substance C at room temperature only in the presence of a catalyst. Which statement best explains this difference?
Between A and B
The reaction is spontaneousMeans reaction is happening by itself.So randomness of A and B is increasing .The highest probability is that A and B are solids and they are forming liquid or gases.
Between A and C
The reaction is non spontaneousRandomness of particles is decreasing.Highest probability is that A and C are gases and they are turning into liquid or solid
Nitrate reduction test consider the uninoculated tube. A. Is it a positive or negative control?
The nitrate reduction test with the uninoculated tube considers it a positive control.
What is a nitrate reduction assay?The nitrate reduction assay is given as the assay with the ability of the bacteria or enzyme to reduce nitrate to nitrite.
The test is performed by considering the difference in the inoculated and the uninoculated tubes with bacteria. The tube with the bacteria and the nitrate is termed a test tube.
The tube with nitrate only without bacteria is termed as a negative control, as it will not have the results for the reduction and can be used to assess the test.
Learn more about nitrate reduction test, here:
https://brainly.com/question/20308712
#SPJ4
Classify each chemical compound as ionic or molecular:
1. MnP ionic or molecular?
2. AIOH3 ionic or molecular?
3. C3S2 ionic or molecular?
The following is a classification of the compounds;
MnP - ionicAIOH3 - ionic C3S2 - molecularWhat is an ionic substance?The term ionic substance refers to a substance that is composed of ions. It is a substance that can dissolve in water.
The following is a classification of the compounds;
MnP - ionicAIOH3 - ionic C3S2 - molecularLearn more about ionic substance:https://brainly.com/question/18026223
SPJ1
Identify reduced, oxidized substance, reducing and oxidizing agents in 3 No₂+ H₂0 -> 2HNO3 + No
Answer:
(c) Fe2O3 + 3CO → 2Fe + 3CO2
Explanation:(c) Fe2O3 + 3CO → 2Fe + 3CO2
Carbon monoxide (CO) is the reducing agent, it has reduced ferric oxide (Fe2O3) which acts as an oxidising agent.
hope its help
Write the chemical equation for this reaction. Use the picture I provide!
Answer:
H2O
H2O
Explanation:
because the are only two hydrogen that can react to Oxygen
Calculate number of moles in 2.71 g of CCl4
The most common source of copper (cu) is the mineral chalcopyrite (cufes2). How many kilograms of chalcopyrite must be mined to obtain 500. G of pure cu?
The amount of chalcopyrite must be mined to obtain 500g of pure Cu is 1.4 kilograms.
What is the relation between mass & moles?Relation between the mass and moles of any substance will be represented as:
n = W/M, where
W = given massM = molar massMoles of Cu = 500g / 63.5g/mol = 7.87 mole
Given chemical reaction is:
CuFeS₂ → Cu²⁺ + Fe²⁺ + 2S²⁻
From the stoichiometry of the reaction, it is clear that
1 mole of Cu = produced by 1 mole of CuFeS₂
7.87 mole of Cu = produced by 7.87 mole of CuFeS₂
Mass of given moles of CuFeS₂ = (7.87mol)(183.5g/mol) = 1,444.14g = 1.4kg
Hence required mass of CuFeS₂ is 1.4 kg.
To know more about mass & moles, visit the below link:
https://brainly.com/question/20838755
#SPJ4
Where on the periodic table is a metal element most likely found? Do not think about the stair case split.
bottom
right side
middle
Answer:
C.) Middle
Explanation:
A.) is incorrect because elements on the bottom of the periodic table can be metals, nonmetals, or metalloids. However, the majority of these elements would be metals.
B.) is incorrect because elements on the right side (aka. the p-block) of the periodic table are mostly nonmetals. This excluding the stair case elements which are metalloids and elements to the left of the stair case which are metals.
C.) is correct because elements located in the middle of the periodic table (aka. the d-block) are always metals. The elements in this section are usually nicknamed the "transition metals". It should be noted that elements on the left side (aka. the s-block) of the periodic table are also metals (excluding hydrogen).
How to calculate delta g for autoionization of water
The Delta G for the autoionization of water can be calculated as [tex]\Delta G=-RTlnK[/tex].
What is the autoionization of water?The autoionization of water is given as the reaction of the two water molecules, resulting in the formation of the ions of hydronium and hydroxide ion.
It can be expressed as:
[tex]\rm 2\;H_2O\;\leftrightharpoons\;H_3O^+\;+\;OH^-[/tex]
The[tex]\Delta G[/tex] of the autoionization of water can be given as;
[tex]\Delta G=-RTlnK[/tex]
Learn more about autoionization, here:
https://brainly.com/question/7251420
#SPJ4
Calcualting molar stability of aucl3 0/010 m mgcl2 solution
The molar solubility of AuCl₃ in 0.010M MgCl₂ is 4 ×10⁻²⁰M.
What is Ksp?The solubility product constant, Ksp, is the equilibrium constant for a solid substance dissolving in an aqueous solution. And for the AuCl₃ Ksp will be written as: Ksp = [Au³⁺][Cl⁻]³
AuCl₃(aq) ⇄ Au³⁺(aq) + 3Cl⁻(aq)
Let the solubility of the AuCl₃ in 0.013m solution of magnesium chloride is x, of Au³⁺ is x and of Cl⁻ is 3x. But we know that MgCl₂ is a strong electrolyte and it completely dissociates into its ion and will produce 2 moles of chloride ions. For this solution let we consider the volume is 1 litre then the concentration of chloride ions in MgCl₂ is 2(0.010) = 0.020M.
So, in MgCl₂ solution concentration of Cl⁻ becomes = 3x + 0.020.
Value of Ksp for AuCl₃ = 3.2 × 10⁻²⁵
On putting all values on the Ksp equation, we get
Ksp = (x)(3x + 0.020)³
Value of 3x is negligible as compared to the 0.020, so the equation becomes
3.2 × 10⁻²⁵ = (x)(0.020)³
x = 3.2×10⁻²⁵ / (0.020)³
x = 4 ×10⁻²⁰M
Hence the molar solubility of AuCl₃ in 0.010M MgCl₂ is 4 ×10⁻²⁰M.
To know more about molar solubility, visit the below link:
https://brainly.com/question/27308068
#SPJ4
