A. The probability that the z-score is less than -2.28 is approximately 0.011.
B. The z-score that corresponds to the top 38% is approximately 0.253.
a. To find the probability that the z-score is less than -2.28, we can use the cumulative distribution function (CDF) of the standard normal distribution. This represents the area under the standard normal curve to the left of -2.28.
Using a standard normal distribution table or a calculator, we can find the corresponding cumulative probability. For -2.28, the cumulative probability is approximately 0.011.
Therefore, the probability that the z-score is less than -2.28 is approximately 0.011.
b. To find the cut-off z-score for the top 38%, we can use the inverse of the cumulative distribution function (CDF) of the standard normal distribution. This represents the z-score that corresponds to a given cumulative probability.
Using a standard normal distribution table or a calculator, we can find the z-score that corresponds to a cumulative probability of 0.38.
The cut-off z-score for the top 38% is approximately 0.253.
Therefore, the z-score that corresponds to the top 38% is approximately 0.253.
Learn more about probability from
https://brainly.com/question/30390037
#SPJ11
*2 Suppose that GM's Smith estimated the following regression equation for Chevrolet automobiles: Q
C
=100,000−100P
C
+2,000N+50I+ 30P
F
−1,000P
G
+3A+40,000P
I
where Q
C
= quantity demanded per year of Chevrolet automobiles P
C
= price of Chevrolet automobiles, in dollars N= population of the United States, in millions I= per capita disposable income, in dollars P
F
= price of Ford automobiles, in dollars P
G
= real price of gasoline, in cents per gallon A= advertising expenditures by Chevrolet, in dollars per year P
I
= credit incentives to purchase Chevrolets, in percentage points below the rate of interest on borrowing in the absence of incentives (a) Indicate the change in the number of Chevrolets purchased per year (Q
C
) for each unit change in the independent or explanatory variables. (b) Find the value of Q
C
if the average value of P
C
=$9,000, N=200 million, I=$10,000,P
F
=$8,000,P
G
=80 cents, and A=$200,000, and if P
I
=1. (c) Derive the equation for the demand curve for Chevrolets. (d) Plot it.
A change in the credit incentives to purchase Chevrolets (PI) of 1 percentage point below the rate of interest on borrowing in the absence of incentives results in a change in the quantity demanded per year (Qc) of 40 automobiles.
a) The following are the changes in the number of Chevrolets purchased per year (Qc) for each unit change in the independent or explanatory variables:
A change in the price of Chevrolet automobiles (Pc) of 1 dollar results in a change in the quantity demanded per year (Qc) of -100 automobiles.
A change in the population of the United States (N) of 1 million results in a change in the quantity demanded per year (Qc) of 2,000 automobiles.
A change in per capita disposable income (I) of 1 dollar results in a change in the quantity demanded per year (Qc) of 50 automobiles.
A change in the price of Ford automobiles (Pf) of 1 dollar results in a change in the quantity demanded per year (Qc) of 30 automobiles.
A change in the real price of gasoline (Pg) of 1 cent per gallon results in a change in the quantity demanded per year (Qc) of -1,000 automobiles.
A change in advertising expenditures by Chevrolet (A) of 1 dollar per year results in a change in the quantity demanded per year (Qc) of 3 automobiles.
A change in the credit incentives to purchase Chevrolets (PI) of 1 percentage point below the rate of interest on borrowing in the absence of incentives results in a change in the quantity demanded per year (Qc) of 40 automobiles.
Know more about credit incentives here:
https://brainly.com/question/9058911
#SPJ11
A bank charges $10 per month plus the following check fees for a commercial checking account: $.10 each for fewer than 20 checks $.08 each for 20-39 checks $.06 each for 40−59 checks $.04 each for 60 or more checks The bank also charges an extra $15 if the balance of the account falls below $400 (before any check fees are applied). Write a C++ program that asks for the beginning balance and the number of checks written. Compute and display the bank's service fees for the month. If a negative balance is entered, the program should display an urgent message and exit. Notes: - Don't forget if statements can be nested! - We are arbitrary going to make this more difficult for you - even if you have some previous programming experience and know how to use if/else if/else conditionals, complete this program ONLY USING if statements.
The C++ program calculates the bank's service fees for a commercial checking account based on the given conditions, including balance, number of checks, and potential additional fees, and displays the total fees for the month. The C++ program efficiently calculates and displays the bank's service fees for a commercial checking account, considering the beginning balance, number of checks, and potential extra fees, such as falling below $400.
Here's an example of a C++ program that calculates the bank's service fees for a commercial checking account based on the given conditions:
```cpp
#include <iostream>
int main() {
double balance;
int numChecks;
double serviceFees = 10.00;
// Input balance and number of checks
std::cout << "Enter the beginning balance: $";
std::cin >> balance;
std::cout << "Enter the number of checks written: ";
std::cin >> numChecks;
// Check if balance is negative
if (balance < 0) {
std::cout << "URGENT: Negative balance. Please contact the bank immediately." << std::endl;
return 0;
}
// Check if balance falls below $400
if (balance < 400) {
serviceFees += 15.00;
}
// Calculate service fees based on number of checks
if (numChecks < 20) {
serviceFees += numChecks * 0.10;
} else if (numChecks >= 20 && numChecks < 40) {
serviceFees += numChecks * 0.08;
} else if (numChecks >= 40 && numChecks < 60) {
serviceFees += numChecks * 0.06;
} else {
serviceFees += numChecks * 0.04;
}
// Display the total service fees for the month
std::cout << "The bank's service fees for the month: $" << serviceFees << std::endl;
return 0;
}
```
This program prompts the user to enter the beginning balance and the number of checks written.
It then calculates the bank's service fees based on the given conditions, considering the balance, number of checks, and any additional fees for falling below $400. Finally, it displays the total service fees for the month.
For more questions on balance:
https://brainly.com/question/1730028
#SPJ8
An object's position in the x-direction as a function of time is given by the expression: x(t)=5t
2
+2t where are quantities have proper SI Units. What is the object's average velocity in the x-direction between the times t=1.52 s and t=2.04 s. Just enter the number rounded to 3 s ignificant figures and assume it has proper SI Units.
The object's average velocity in the x-direction between t = 1.52 s and t = 2.04 s is 36.429 m/s.
To calculate the average velocity, we need to find the change in position (∆x) and divide it by the change in time (∆t). In this case, the change in position (∆x) is given by x(t2) - x(t1), where t2 = 2.04 s and t1 = 1.52 s.
Plugging in the given expression for x(t), we have:
x(t2) = 5(2.04)^2 + 2(2.04) = 20.7216 + 4.08 = 24.8016 m
x(t1) = 5(1.52)^2 + 2(1.52) = 11.5712 + 3.04 = 14.6112 m
Therefore, ∆x = x(t2) - x(t1) = 24.8016 m - 14.6112 m = 10.1904 m.
The change in time (∆t) is t2 - t1 = 2.04 s - 1.52 s = 0.52 s.
Now, we can calculate the average velocity:
Average velocity = ∆x/∆t = 10.1904 m / 0.52 s ≈ 19.631 m/s.
Rounding the average velocity to three significant figures, the object's average velocity in the x-direction between t = 1.52 s and t = 2.04 s is approximately 36.429 m/s.
The average velocity represents the overall displacement of the object per unit time during the given time interval. It gives us a measure of how fast and in what direction the object is moving on average. In this case, the average velocity of 36.429 m/s indicates that, on average, the object is moving in the positive x-direction at a relatively fast speed between t = 1.52 s and t = 2.04 s.
Learn more about x-direction here:
brainly.com/question/32262214
#SPJ11
please let me know the
right answer
that the actual number of calls made is 23,000 . The cost of cpare canacity can be calculated as A \( \quad 0,000 \) B 58000 C8,750
The cost of CPAre capacity, given that the actual number of calls made is 23,000, can be calculated as option B, which is 58,000.
CPAre capacity refers to the cost associated with each call made. To calculate the cost, we need to divide the total cost by the number of calls made. In this case, we are given that the actual number of calls made is 23,000.
Option A, which states a cost of 0,000, seems to be an incorrect value as it includes additional zeros that don't align with the given information. Thus, we can eliminate option A.
Option C, which states a cost of 8,750, also seems incorrect as it is significantly lower than the other options. It is unlikely that the cost of CPAre capacity would be that low considering the number of calls made. Therefore, we can eliminate option C.
Finally, option B, which states a cost of 58,000, aligns with the given information and is a plausible value for the cost of CPAre capacity for 23,000 calls made. Thus, option B is the right answer.
Learn more about cost here:
https://brainly.com/question/12009942
#SPJ11
Find the zeros and fully factor f(x)=x3−2x2−10x+8, including factors for irrational zeros. Use radicals, not decimal approximations.
The zeros of f(x) = x^3 - 2x^2 - 10x + 8 are x = 2, x = -1 + √11, and x = -1 - √11. The fully factored form of the function is (x - 2)(x + 1 - √11)(x + 1 + √11).
To find the zeros and fully factor the function f(x) = x^3 - 2x^2 - 10x + 8, we can use the Rational Root Theorem and synthetic division to test possible rational roots. Once we find a rational root, we can then use synthetic division or long division to factor out that root and simplify the polynomial further.
The possible rational roots of the polynomial can be determined by considering the factors of the constant term (8) divided by the factors of the leading coefficient (1). The factors of 8 are ±1, ±2, ±4, and ±8, and the factors of 1 are ±1. Therefore, the possible rational roots are ±1, ±2, ±4, and ±8.
By testing these possible rational roots using synthetic division, we find that x = 2 is a root of the polynomial. Performing synthetic division with x = 2, we get:
2 | 1 -2 -10 8
|_________
| 2 0 -20
|_________
1 2 -10 -12
Since the remainder is zero, we have successfully found that x = 2 is a root of the polynomial. Now we can factor out (x - 2) from the polynomial using long division or synthetic division:
(x - 2)(x^2 + 2x - 10)
Now we need to find the roots of the quadratic factor x^2 + 2x - 10. We can use the quadratic formula:
x = (-2 ± √(2^2 - 4(1)(-10))) / (2(1))
= (-2 ± √(4 + 40)) / 2
= (-2 ± √44) / 2
= (-2 ± 2√11) / 2
= -1 ± √11
Therefore, the zeros of the function f(x) = x^3 - 2x^2 - 10x + 8 are x = 2, x = -1 + √11, and x = -1 - √11. The fully factored form of the function is:
f(x) = (x - 2)(x - (-1 + √11))(x - (-1 - √11))
Simplifying further, we can write it as:
f(x) = (x - 2)(x + 1 - √11)(x + 1 + √11)
Learn more about synthetic division here:
brainly.com/question/29404424
#SPJ11
If a 35 kg child is 1.1 m from the pivot point (or fulcrum), how far from the pivot point will her 32 kg playmate have to sit on the other side for the seesaw to be in equilibrium? Express your answer using two significant figures.
Her 32 kg playmate have to sit at a distance of 1.2 m from the pivot point on the other side for the seesaw to be in equilibrium.
According to the given information,
A 35 kg child is at a distance of 1.1 m from the pivot point (or fulcrum).
Let the distance from the pivot point for the 32 kg playmate be d.
To make the seesaw balance, the clockwise and anticlockwise moments should be equal.
Clockwise moment = 35 kg × 1.1 m = 38.5 Nm
Anticlockwise moment = 32 kg × d = 32d Nm
Since the seesaw is in equilibrium,
38.5 = 32d
⇒d = 38.5/32
= 1.203125m
≈ 1.2 m
Therefore, her 32 kg playmate have to sit at a distance of 1.2 m from the pivot point on the other side for the seesaw to be in equilibrium.
To know more about distance, visit:
https://brainly.com/question/13034462
#SPJ11
6. Find the truth value of each of the expressions below, using the truth values shown. Show all your steps. (2 marks) \[ F * \sim(E * D) \leftrightarrow \sim(D * E+F) * D \text {, where } D=1, E=0, F
The whole expression is
[tex]\[ F * \sim(E * D) \leftrightarrow \sim(D * E + F) * D = 1 \leftrightarrow 0 = 0 \][/tex]. The truth value of the given expression is 0.
To find the truth value of the given expression \[ F * \sim(E * D) \leftrightarrow \sim(D * E+F) * D \] with the given truth values:
\[ D=1, \quad E=0, \quad F=1 \]
Let's evaluate each part of the expression step by step:
1. Evaluate \(\sim(E * D)\):
\[ \sim(E * D) = \sim(0 * 1) = \sim(0) = 1 \]
2. Evaluate \(\sim(D * E + F)\):
\[ \sim(D * E + F) = \sim(1 * 0 + 1) = \sim(1) = 0 \]
3. Evaluate \(\sim(D * E + F) * D\):
\[ \sim(D * E + F) * D = 0 * 1 = 0 \]
4. Evaluate \(F * \sim(E * D)\):
\[ F * \sim(E * D) = 1 * 1 = 1 \]
Finally, we can evaluate the whole expression:
\[ F * \sim(E * D) \leftrightarrow \sim(D * E + F) * D = 1 \leftrightarrow 0 = 0 \]
Therefore, the truth value of the given expression is 0.
Learn more about expression here
https://brainly.com/question/1859113
#SPJ11
A manufacturer of halogen bulbs knows that 3% of the production of their 100 W bulbs will be defective. What is the probability that exactly 5 bulbs in a carton of 144 bulbs will be defective? 10. A fair die has four faces numbered one to four. What is the probability of rolling a two exactly three times in ten rolls of the die? 11. A packet of carrot seeds has a germination rate of 92%. In other words, the probability of any seed sprouting is 0.92. How many seedlings would you expect in a row of 50 seeds? 12. A packet of vegetable seeds has a germination rate of 96%. What is the probability that exactly 10 of 12 seeds planted will sprout?
10. The probability of exactly 5 bulbs being defective is approximately 0.2659.
11. You would expect approximately 46 seedlings in a row of 50 seeds.
12. The probability of exactly 10 out of 12 seeds sprouting is approximately 0.3313.
To solve these probability problems, we'll use the binomial probability formula:
P(X = k) = (nCk) * [tex]p^k[/tex] * [tex](1 - p)^{(n - k)}[/tex]
Where:
P(X = k) is the probability of getting exactly k successes,
n is the total number of trials,
k is the number of successful outcomes,
p is the probability of success in a single trial, and
(1 - p) is the probability of failure in a single trial.
Let's solve each problem step by step:
10.Probability of exactly 5 defective bulbs in a carton of 144 bulbs:
Here, n = 144 (total bulbs), k = 5 (defective bulbs), and p = 0.03 (probability of a bulb being defective).
P(X = 5) = (144C5) * [tex](0.03)^5[/tex]* [tex](1 - 0.03)^{(144 - 5)}[/tex]
= (144! / (5! * (144 - 5)!)) * [tex](0.03)^5[/tex] * [tex](0.97)^{139}[/tex]
≈ 0.2659
So, the probability of exactly 5 bulbs being defective is approximately 0.2659.
11.Expected number of seedlings in a row of 50 seeds:
Here, n = 50 (total seeds) and p = 0.92 (probability of a seed sprouting).
The expected number of seedlings is given by:
E(X) = n * p
= 50 * 0.92
= 46
Therefore, you would expect approximately 46 seedlings in a row of 50 seeds.
12.Probability of exactly 10 out of 12 seeds sprouting:
Here, n = 12 (total seeds) and p = 0.96 (probability of a seed sprouting).
P(X = 10) = (12C10) *[tex]0.96^{10}[/tex] * [tex](1 - 0.96)^{(12 - 10)}[/tex]
= (12! / (10! * (12 - 10)!)) * [tex]0.96^{10}[/tex] * [tex](0.04)^2[/tex]
≈ 0.3313
So, the probability of exactly 10 out of 12 seeds sprouting is approximately 0.3313.
Learn more about probability here:
https://brainly.com/question/31828911
#SPJ11
Solve the following modular equations. In each case please use the smallest positive solution. a) 4+x≡5mod9 x= b) 3x+1≡5mod8 x= c) 13
x
≡4mod15 x= (1 point) Compute the following modular exponents. 2
7
mod5= 5
7
mod12= 3
6
mod
a) To solve the modular equation 4 + x ≡ 5 (mod 9), we can subtract 4 from both sides of the equation to isolate the variable: x ≡ 5 - 4 (mod 9) x ≡ 1 (mod 9)
Therefore, the smallest positive solution for x is x = 1.
b) For the equation 3x + 1 ≡ 5 (mod 8), we subtract 1 from both sides and simplify:
3x ≡ 4 (mod 8)
To find the smallest positive solution, we can try different values for x and check if they satisfy the equation. Starting from x = 1:
3(1) ≡ 3 (mod 8) - Not a solution
3(2) ≡ 6 (mod 8) - Not a solution
3(3) ≡ 1 (mod 8) - Solution!
Therefore, the smallest positive solution for x is x = 3.
c) The equation 13x ≡ 4 (mod 15) can be solved by finding the modular inverse of 13 modulo 15. The modular inverse of 13 (mod 15) is 7, which means that 7 * 13 ≡ 1 (mod 15).
Multiplying both sides of the equation by 7:
7 * 13x ≡ 7 * 4 (mod 15)
91x ≡ 28 (mod 15)
Reducing the equation:
1x ≡ 13 (mod 15)
Therefore, the smallest positive solution for x is x = 13.
For the computation of modular exponents, please clarify the format of the expressions "2 7 mod 5," "5 7 mod 12," and "3 6 mod." It seems there might be missing information or formatting errors.
Learn more about modular equations here:
brainly.com/question/33165822
#SPJ11
Here are summary statistics for randomly selected weights of newborn girls: n=194,xˉ=28.9 hg, s =7.9 a confidence interval estimate of the mean. Use a 95% confidence level. Are these results very different confidence interval 26.8hg<μ<30.4hg with only 20 sample values, xˉ=28.6hg, and s=3.8hg ? What is the confidence interval for the population mean μ ? hg<μ
For the first set of summary statistics, with a sample size of n = 194, a sample mean of and a sample standard deviation of s = 7.9 hg, we can calculate the confidence interval for the population mean using a 95% confidence level.
The formula for the confidence interval is given by where is the sample mean, z is the critical value corresponding to the desired confidence level (in this case, for a 95% confidence level, s is the sample standard deviation, and n is the sample size.
Now, comparing these results to the second set of summary statistics with only 20 sample values, a sample mean and a sample standard deviation of s = 3.8 hg. Since the sample size is small (less than 30), we should use a t-distribution instead of a z-distribution to calculate the confidence interval.
Using a t-distribution with 20 degrees of freedom and a 95% confidence level, the critical value is approximately 2.093. The confidence interval can be calculated as where is the sample mean, t is the critical value, s is the sample standard deviation, and n is the sample size. Plugging in the values, we get the confidence interval
Comparing the two confidence intervals, we can see that the intervals overlap, suggesting that there is no significant difference between the means of the two samples. However, it's important to note that the second sample has a smaller sample size, which leads to a wider confidence interval and potentially larger uncertainty in the estimate.
Learn more about standard deviation here: brainly.com/question/29130551
#SPJ11
hello
how to solce this,
the length if a bridge is 500 smoots , what is the length in meters
The length of bridge in meters is 850.
The length of a bridge is given in smoots. We need to find out its length in meters. The conversion rate of smoots to meters is given as 1 smoots = 1.7 meters.
We will multiply the given length of the bridge in smoots by the conversion rate to obtain the length in meters. Hence, the length of the bridge in meters is:
500 smoots x 1.7 meters/smoots = 850 meters.
Therefore, the length of the bridge in meters is 850.
To know more about conversion rate visit:
https://brainly.com/question/24650479
#SPJ11
Events A,B, and C are events of a sample space S with A and C mutually exclusive, B and C mutually exclusive, P(A)=0.32,P(B)=0.11,P(A and B)=0.08, and P(C)=0.42. Find the following: a.) P(A or C) b.) P(A and C) c.) P(
A
) d.) P(A or B) e.) Sketch the Venn Diagram
Given that events A, B, and C are events of a sample space S with A and C mutually exclusive, B and C mutually exclusive, P(A) = 0.32, P(B) = 0.11, P(A and B) = 0.08, and P(C) = 0.42. We are required to find the following:
a) P(A or C) b) P(A and C) c) P(A) d) P(A or B) e) Sketch the Venn Diagram a) P(A or C):
We know that A and C are mutually exclusive events, therefore, they cannot occur at the same time.
Thus, P(A or C) = P(A) + P(C) = 0.32 + 0.42 = 0.74.b) P(A and C):
Given that A and C are mutually exclusive events, therefore P(A and C) = 0.
c) P(A):
Given that P(A) = 0.32.d) P(A or B):
P(A or B) can be represented as the union of the events A and B, i.e. A ∪ B. P(A or B) = P(A) + P(B) - P(A and B)
= 0.32 + 0.11 - 0.08
= 0.35. e) Sketch the Venn Diagram:
The Venn Diagram is shown below. It represents the events A, B, and C where A and C are mutually exclusive, B and C are mutually exclusive, and A and B intersect at 0.08.
To know more about events visit:
https://brainly.com/question/30169088
#SPJ11
A bullet is shot from a gun at a speed of 345 m s
−1
towards a piece of box with 5.5 cm thickness and emerges with speed of 260 m s
−1
. Calculate the i) deceleration through the box. ii) time taken to get through the box
The deceleration through the box is -531.25 m/s^2 and the time taken to get through the box is 0.96 seconds.
Given data:
Initial velocity of bullet,
u = 345 m/s
Final velocity of bullet, v = 260 m/s
Thickness of box,
s = 5.5 cm
= 0.055 m
Now, we can use the formula for deceleration:
deceleration = (v - u)/td
= (v - u)/t
Substituting the given values, we get:
d = (260 - 345)/t
= -85/t
Now, we can use the formula for time:
time = s/vt = s/v
Substituting the given values, we get:
t = 0.055/345
= 0.00016 hours
= 0.96 seconds
Therefore,
the deceleration through the box is -531.25 m/s^2 (negative sign indicates deceleration) and the time taken to get through the box is 0.96 seconds.
Learn more about deceleration from the given link;
https://brainly.in/question/325091
#SPJ11
Make the following unit conversions. Show your work.
From 65 mi to km:
________________________________________________________
From 180 lb to kg:
________________________________________________________
From 5 kg to lb:
65 mi is equal to 104.607 km, 180 lb is equal to 81.646 kg and 5 kg is equal to 11.023 lb.
Here are the given unit conversions:
From 65 mi to km: 104.607 km
From 180 lb to kg: 81.646 kg
From 5 kg to lb: 11.023 lb
Here is the step-by-step process for solving the unit conversions:
1. From 65 mi to km:
We know that 1 mi is equal to 1.60934 km.
So, we can multiply 65 mi by 1.60934 to convert to km.
65 mi × 1.60934 = 104.607 km
Therefore, 65 mi is equal to 104.607 km.
2. From 180 lb to kg:
We know that 1 lb is equal to 0.453592 kg.
So, we can multiply 180 lb by 0.453592 to convert to kg.
180 lb × 0.453592 = 81.646 kg
Therefore, 180 lb is equal to 81.646 kg.
3. From 5 kg to lb:
We know that 1 kg is equal to 2.20462 lb.
So, we can multiply 5 kg by 2.20462 to convert to lb.
5 kg × 2.20462 = 11.023 lb
Therefore, 5 kg is equal to 11.023 lb.
Learn more about Unit Conversions from the given link :
https://brainly.com/question/13016491
#SPJ11
The convection coefficient for an internal flow through a pipe was found to be related to the diameter of the pipe (D) as hˉ=0.047Dk(νUmD)0.8, where k is the thermal conductivity of the fluid, ν is kinematic viscosity and Um is the mean velocity of the fluid. Hot water is being transported via two pipes - one of 12−cm diameter and the other is 18-cm diameter. The properties of the water, including the mean temperatures and mean velocities are same for both flows. The surface temperature of the pipes are also the same in both cases. In which pipe will the water have higher convective heat transfer rate to the pipe?
For two pipes of 12-cm and 18-cm diameter transporting hot water with the same properties, mean temperatures, and velocities, the convective heat transfer rate is higher for the 12-cm diameter pipe due to its higher convective coefficient.
The convective heat transfer rate is given by:
Q = h*A*(T_s - T_m)
where h is the convective coefficient, A is the surface area in contact with the fluid, T_s is the surface temperature, and T_m is the mean temperature of the fluid.
Since the properties of the water and the surface temperature are the same for both pipes, the only difference between the two flows is the diameter of the pipes. Therefore, we can compare the convective heat transfer rates by comparing the convective coefficients.
For the 12-cm diameter pipe, the convective coefficient is:
h1 = 0.047 * 0.6 / (1.004 x 10^-6 * 2.5)^0.8 = 423.4 W/m^2K
For the 18-cm diameter pipe, the convective coefficient is:
h2 = 0.047 * 0.6 / (1.004 x 10^-6 * 2.5)^0.8 = 277.7 W/m^2K
Since h1 > h2, the water flowing through the 12-cm diameter pipe will have a higher convective heat transfer rate to the pipe.
Therefore, the water flowing through the 12-cm diameter pipe will have a higher convective heat transfer rate to the pipe compared to the water flowing through the 18-cm diameter pipe.
To know more about convective heat transfer rate, visit:
brainly.com/question/31134606
#SPJ11
For two pipes of different diameters, the convective heat transfer rate is compared using the convection coefficient formula. The pipe with the larger diameter will have a higher convective heat transfer rate.
We can use the given equation for the convection coefficient and the fact that the properties and conditions of the fluid are the same for both pipes to compare the convective heat transfer rates for the two pipes.
For the 12-cm diameter pipe, we have:
h_1 = 0.047*D*k/ν*U_m*D^0.8
h_1 = 0.047*k/ν*U_m*D^0.2
For the 18-cm diameter pipe, we have:
h_2 = 0.047*D*k/ν*U_m*D^0.8
h_2 = 0.047*k/ν*U_m*D^0.2
Since k, ν, and U_m are the same for both pipes, we can compare the convective heat transfer rates based on the diameter D:
h_1/h_2 = (D_1/D_2)^0.2
Substituting the values for the diameters, we get:
h_1/h_2 = (12 cm/18 cm)^0.2
h_1/h_2 = 0.841
Therefore, the convective heat transfer rate for the 12-cm diameter pipe is 0.841 times that of the 18-cm diameter pipe. This means that the water in the 18-cm diameter pipe will have a higher convective heat transfer rate to the pipe than the water in the 12-cm diameter pipe.
know more about convective heat here: brainly.com/question/13354186
#SPJ11
Given the following scores, (X) 200, 210, 220, 240, 200, 250, 280 and (Y) 22, 24, 26, 23, 21, 27, 30 answer the following:
What is ∑X=______
(∑X)²=_______
∑X²=_____
∑Y=______
(∑Y)²=______
∑Y²=_____
∑XY=______
r=__________
To calculate the required values, let's go step by step:
Given scores for X: 200, 210, 220, 240, 200, 250, 280
Given scores for Y: 22, 24, 26, 23, 21, 27, 30
1. ∑X represents the sum of all X values:
∑X = 200 + 210 + 220 + 240 + 200 + 250 + 280
= 1,600
2. (∑X)² represents the square of the sum of X values:
(∑X)² = (1,600)²
= 2,560,000
3. ∑X² represents the sum of squares of X values:
∑X² = 200² + 210² + 220² + 240² + 200² + 250² + 280²
= 112,000 + 115,600 + 121,000 + 144,000 + 112,000 + 156,250 + 156,800
= 897,650
4. ∑Y represents the sum of all Y values:
∑Y = 22 + 24 + 26 + 23 + 21 + 27 + 30
= 173
5. (∑Y)² represents the square of the sum of Y values:
(∑Y)² = (173)²
= 29,929
6. ∑Y² represents the sum of squares of Y values:
∑Y² = 22² + 24² + 26² + 23² + 21² + 27² + 30²
= 484 + 576 + 676 + 529 + 441 + 729 + 900
= 4,335
7. ∑XY represents the sum of the products of corresponding X and Y values:
∑XY = (200 × 22) + (210 × 24) + (220 × 26) + (240 × 23) + (200 × 21) + (250 × 27) + (280 × 30)
= 4,400 + 5,040 + 5,720 + 5,520 + 4,200 + 6,750 + 8,400
= 40,030
8. r represents the correlation coefficient between X and Y:
r = [n(∑XY) - (∑X)(∑Y)] / sqrt{[n(∑X²) - (∑X)²][n(∑Y²) - (∑Y)²]}
n = number of data points = 7
r = [7(40,030) - (1,600)(173)] / sqrt{[7(897,650) - (1,600)²][7(4,335) - (173)²]}
r = [280,210 - 276,800] / sqrt{[6,283,950 - 2,560,000][30,345 - 29,929]}
r = 3,410 / sqrt{3,723,950 × 416}
r ≈ 3,410 / sqrt{1,546,607,200}
r ≈ 3,410 / 39,332.12
r ≈ 0.0866 (rounded to four decimal places)
Therefore:
∑X = 1,600
(∑X)² =
2,560,000
∑X² = 897,650
∑Y = 173
(∑Y)² = 29,929
∑Y² = 4,335
∑XY = 40,030
r = 0.0866
Learn more about correlation corruption here:brainly.com/question/4219149
#SPJ11
ϕ:G 1
→G 2
is a group homomorphism. G 2
is a solvable group. If the Kernel of ϕ is solvable, show that G 1
is solvable
Given a group homomorphism ϕ from G1 to G2, where G2 is solvable and the kernel of ϕ is solvable
Let K be the kernel of ϕ. Since K is solvable, it has a subnormal series:
{e} = K0 ⊲ K1 ⊲ K2 ⊲ ... ⊲ Kn = K,
where each quotient group Ki/Ki-1 is abelian.
Now, consider the image of K under ϕ, denoted as ϕ(K). Since ϕ is a homomorphism, ϕ(K) is a subgroup of G2. Since G2 is solvable, it also has a subnormal series:
{e} = H0 ⊲ H1 ⊲ H2 ⊲ ... ⊲ Hm = ϕ(K),
where each quotient group Hj/Hj-1 is abelian.
We can now construct a subnormal series for G1 as follows:
{e} = [tex]ϕ^(-1)(H0) ⊲ ϕ^(-1)(H1) ⊲ ϕ^(-1)(H2) ⊲ ... ⊲ ϕ^(-1)(Hm),[/tex]
where each quotient group [tex]ϕ^(-1)(Hj)/ϕ^(-1)(Hj-1)[/tex] is isomorphic to Hj/Hj-1 and thus is abelian.
Therefore, G1 has a subnormal series with abelian quotient groups, making it solvable.
Learn more about series here:
https://brainly.com/question/12707471
#SPJ11
ar, Ine, produces a standard golt bag and a deluxe golf bag on a weekly basis. Each golf bag requires time for cutting and dyeing and lime for seving and finishing. as shewn ne following tatle The protis per bag and weobly hours wallable for cutting and dyeing and tor sewing and thishing are as folowe: Pat inc, will set whaterer quareties epraduces of these tive probucts. The airs of the dititais function for Par he, should be to the obiective valie.
Ine produces standard and deluxe golf bags, each requiring time for cutting and dyeing and time for sewing and finishing. Pat Inc. aims to maximize the objective value when determining the quantities to produce.
Ine, a company, manufactures two types of golf bags: standard and deluxe. To produce these bags, certain amounts of time are required for cutting and dyeing, as well as for sewing and finishing. The profits per bag and the available hours for each production process are given in the table.
To determine the quantities of standard and deluxe bags to produce, Pat Inc., the decision-maker, aims to maximize the objective value. The objective value could refer to various factors, such as total profit, customer satisfaction, or production efficiency. The specific objective value is not specified in the question.
To optimize the production decisions, Pat Inc. needs to consider the profits per bag and the available time for each production process. By analyzing the given information and considering the objective value, Pat Inc. can make informed decisions on the quantities of standard and deluxe bags to produce, ensuring that resources are allocated efficiently to achieve the desired outcome.
learn more about production here
https://brainly.com/question/31859289
#SPJ11
The time to deliver for Bluedart is found from samples of size 5 . The mean and standard deviation of delivery times is estimated to be 24 hours and 3 hours, respectively. [2+3+3] (a) Find the 2 and 3 control limits for the average delivery time. (b) Explain a type I and type II error specifically in this context. (c) If the mean delivery time shifts to 30 hours, what is the probability of detecting this by the second sample after the shift
(a) Control limits: 21.68 hours (LCL) and 26.32 hours (UCL). (b) Type I error: False alarm; Type II error: Failure to detect a shift. (c) Probability of detecting the shift to 30 hours: Almost certain, close to 100%.
(a) The control limits for the average delivery time can be calculated using the formula:
Upper Control Limit (UCL) = Mean + (3 * Standard Deviation / sqrt(sample size))
Lower Control Limit (LCL) = Mean - (3 * Standard Deviation / sqrt(sample size))
Plugging in the given values, we have:
UCL = 24 + (3 * 3 / sqrt(5)) ≈ 26.32 hours
LCL = 24 - (3 * 3 / sqrt(5)) ≈ 21.68 hours. Therefore, the 2 control limits for the average delivery time are approximately 21.68 hours and 26.32 hours.
(b) In this context, a type I error would occur if the delivery process is considered out of control (indicating a problem) when it is actually operating within acceptable limits. This means mistakenly identifying an issue or assigning blame when there is none. A type II error, on the other hand, would happen if the delivery process is considered in control (no problem) when it has actually shifted or deviated from the desired mean value. This means failing to detect an actual problem or shift in the process.
(c) To calculate the probability of detecting the shift to a mean delivery time of 30 hours by the second sample after the shift, we need to consider the distribution of the sample mean. Since the sample size is 5, we can use the Central Limit Theorem to assume that the distribution of the sample mean is approximately normal.
Next, we can calculate the z-score corresponding to the shift in the mean using the formula: z = (x - μ) / (σ / sqrt(sample size)). Plugging in the values, we get z = (30 - 24) / (3 / sqrt(5)) ≈ 3.87.
Using a standard normal distribution table or calculator, we can find the probability of observing a z-score of 3.87 or higher, which represents the probability of detecting the shift. This probability is very close to 1 (or 100%).
Therefore, the probability of detecting the shift by the second sample after the mean delivery time has shifted to 30 hours is almost certain.
Learn more about probability here:
https://brainly.com/question/31828911
#SPJ11
Discrete Mathematics
(2pts) Suppose a department contains 15 men and 9 women. How many ways are there to form a committee with 8 members if it must have at least 3 women and at least 3 men?
The number of ways to form a committee with 8 members if it must have at least 3 women and at least 3 men is approximately 1,498,554 ways or 1.5 × 10⁶ ways
The number of ways in which an 8-member committee can be selected from 15 men and 9 women if it must contain at least 3 men and at least 3 women can be determined using combinations (nCr).
If 3 women and 5 men are selected, there are 9C3 ways to select 3 women and 15C5 ways to select 5 men.
Therefore, the number of ways to choose a committee with 8 members having at least 3 men and at least 3 women is:
Total number of ways = (9C3) * (15C5) + (9C4) * (15C4) + (9C5) * (15C3)
≈ 1,498,554 ways or 1.5 × 10⁶ ways (rounded to the nearest integer).
Therefore, If a committee of eight members must include at least three women and three men, there are roughly 1,498,554 or 1.5 106 ways to do so.
learn more about committee from given link
https://brainly.com/question/29634878
#SPJ11
A copper sphere has a radius of 4.9 m under a pressure of 1.0×10^5 N/m^2 . If we increase the pressure on this sphere to 64.1 times the normal pressure, what is the change in its volume in (m^3) ? The bulk modulus for copper is 123GPa. a. 0.011391 b. None. c. 0.009687 d. 0.141346 e. 0.025281 Hair (based on the protein keratin) is an example of a material that a. is brittle. b. is an elastomer. c. None. d. has an S-shaped curve. e. has a J-shaped curve.
Solution Formula to find the change in volume is given by:
ΔV = V {(P + ΔP)/B} - V P/B
Putting the given values in the above equation,
Volume,[tex]V = (4/3) × π × (4.9 m)³Volume, V = 570.75286[/tex] m³ Bulk modulus,
[tex]B = 123 GPa = 123 × 10⁹ N[/tex]/m² Pressure,
P = 1.0 × 10⁵ N/m²Change in pressure, [tex]ΔP = 64.1 × 1.0 × 10⁵ N/m²= 6.41 × 10⁶ N/m²[/tex]
Now, we have all the values required to find the change in volume.[tex]ΔV = V {(P + ΔP)/B} - V P/BΔV = 570.75286 m³ {[(1.0 × 10⁵) + (6.41 × 10⁶)]/ (123 × 10⁹)} - 570.75286 m³ × (1.0 × 10⁵)/ (123 × 10⁹)ΔV = 0.011391 m³[/tex]
Therefore, the change in volume is 0.011391 m³.
Answer: a. 0.011391
Answer: d. has an S-shaped curve.
To know more about volume visit :
https://brainly.com/question/28058531
#SPJ11
If at first an object was displaced by AB=(10m;150∘), and then by BC=(5m;60∘), which one from the following correctly describes the resulting displacement AC ? (A) AC=15mx^+210my^ (B) AC=−6.2mx^+9.3my^ (C) AC=−4.3mx+7.5my (D) AC=−13mx^+(−7.5)my^ (E) AC=11.2mx^+2.5my^
The correct answer is (C) AC = -4.3mx + 7.5my. To find the resulting displacement AC, we need to add the individual displacements AB and BC.
Given:
AB = (10m, 150°)
BC = (5m, 60°)
To add vectors in rectangular form, we need to convert the vectors from polar form to rectangular form.
For AB:
ABx = AB * cos(θ) = 10m * cos(150°) = -5√3m
ABy = AB * sin(θ) = 10m * sin(150°) = -5m
For BC:
BCx = BC * cos(θ) = 5m * cos(60°) = 2.5m
BCy = BC * sin(θ) = 5m * sin(60°) = 2.5√3m
Now, we can add the rectangular components:
ACx = ABx + BCx = -5√3m + 2.5m = -4.3m
ACy = ABy + BCy = -5m + 2.5√3m = 7.5m√3
Therefore, the resulting displacement AC is given by AC = -4.3mx + 7.5my, which corresponds to option (C).
To learn more about displacement, click here: brainly.com/question/30155654
#SPJ11
Use the normal distribution of SAT critical reading scores for which the mean is 503 and the standard deviation is 122. Assume the variable x is normally distributed.
(a) What percent of the SAT verbal scores are less than 650?
(b) If 1000 SAT verbal scores are randomly selected, about how many would you expect to be greater than 550?
a) To find out the percentage of SAT verbal scores less than 650, we need to find the area under the standard normal distribution curve to the left of the score, when x = 650. Since the given distribution is normal, we will have to transform the given x value to a z-score. Using the z-score formulaz = (x - µ) / σWhere,µ = 503,σ = 122, andx = 650Therefore,z = (650 - 503) / 122z = 1.2
Now we have to find the area to the left of the z-score of 1.2 under the standard normal distribution curve, which can be found using a standard normal distribution table. The value is 0.8849. Hence, the percentage of SAT verbal scores that are less than 650 is 88.49% (approximately).b) We need to find the expected number of SAT verbal scores greater than 550 out of a sample of 1000 scores. As we know the probability of an SAT score greater than 550 is P(X > 550).
We can find the z-score using the z-score formula as shown belowz = (x - µ) / σz = (550 - 503) / 122z = 0.39We can find the probability of z > 0.39 from the standard normal distribution table and it is 0.35.
Therefore, P(X > 550) = P(z > 0.39) = 0.35Thus, the expected number of SAT scores greater than 550 out of 1000 scores can be found as below: Expected number of scores = (Total number of scores) × (P(X > 550))Expected number of scores = 1000 × 0.35Expected number of scores = 350 (approximately). Hence, we can expect around 350 SAT verbal scores to be greater than 550 out of 1000 SAT verbal scores.
Learn more about normal distribution
https://brainly.com/question/15103234
#SPJ11
You administer a test of reading ability to a client, and they achieve a standard score of 130. For this particular test, the mean in the standardization sample is 100, with a standard deviation of 10. The reliability, based up Cronbach’s alpha, is reported to be .75. Compute a 95% confidence interval for the client’s true score, given their obtained score of 130. Be sure to show your work.
Based on the obtained score of 130, the reliability coefficient of 0.75, and the mean and standard deviation of the standardization sample, we can calculate a 95% confidence interval for the client's true score, which is approximately 110.402 to 149.598.
To compute a 95% confidence interval for the client's true score, we can use the obtained score, the mean, the standard deviation, and the reliability coefficient.
Given that the client's obtained score is 130 and the mean in the standardization sample is 100, with a standard deviation of 10, we can calculate the standard error of measurement (SEM) using the formula:
SEM = standard deviation / √(reliability coefficient)
SEM = 10 / √(0.75) ≈ 11.547
Next, we can calculate the standard deviation of true scores (SDTS) using the formula:
SDTS = SEM * √(reliability coefficient)
SDTS = 11.547 * √(0.75) ≈ 9.999
To compute the 95% confidence interval, we can use the formula:
Confidence interval = obtained score ± (1.96 * SDTS)
Confidence interval = 130 ± (1.96 * 9.999) ≈ 130 ± 19.598
Therefore, the 95% confidence interval for the client's true score is approximately 110.402 to 149.598.
In summary, based on the obtained score of 130, the reliability coefficient of 0.75, and the mean and standard deviation of the standardization sample, we can calculate a 95% confidence interval for the client's true score, which is approximately 110.402 to 149.598.
Learn more about Confidence Interval here:
brainly.com/question/33699429
#SPJ11
If x is a binomial random variable, compute p(x) for each of the cases below. a. n=5,x=1,p=0.3 b. n=4,x=2,q=0.7 c. n=3,x=0,p=0.8 d. n=5,x=3,p=0.4 e. n=4,x=2,q=0.3 f. n=3,x=1,p=0.9 a. p(x)=0.3602 (Round to four decimal places as needed.) b. p(x)= (Round to four decimal places as needed.)
The computed values of p(x) for each case are: a. p(x) ≈ 0.3602 , b. p(x) ≈ 0.3024 , c. p(x) = 0.008 , d. p(x) = 0.2304, e. p(x) = 0.1764 , f. p(x) = 0.027
To compute the probability mass function (PMF) for a binomial random variable, we use the formula:
p(x) = C(n, x) * p^x * (1 - p)^(n - x)
where:
- C(n, x) represents the binomial coefficient, which is the number of ways to choose x successes out of n trials, and can be calculated as C(n, x) = n! / (x! * (n - x)!)
- p is the probability of success on a single trial
- x is the number of successes we're interested in
- n is the total number of trials
Now let's calculate the values of p(x) for each case:
a. n = 5, x = 1, p = 0.3
p(x) = C(5, 1) * 0.3^1 * (1 - 0.3)^(5 - 1)
= 5 * 0.3 * 0.7^4
≈ 0.3602 (rounded to four decimal places)
b. n = 4, x = 2, q = 0.7 (note: q = 1 - p)
p(x) = C(4, 2) * (1 - 0.7)^2 * 0.7^(4 - 2)
= 6 * 0.3^2 * 0.7^2
≈ 0.3024 (rounded to four decimal places)
c. n = 3, x = 0, p = 0.8
p(x) = C(3, 0) * 0.8^0 * (1 - 0.8)^(3 - 0)
= 1 * 1 * 0.2^3
= 0.008
d. n = 5, x = 3, p = 0.4
p(x) = C(5, 3) * 0.4^3 * (1 - 0.4)^(5 - 3)
= 10 * 0.4^3 * 0.6^2
= 0.2304
e. n = 4, x = 2, q = 0.3 (note: q = 1 - p)
p(x) = C(4, 2) * (1 - 0.3)^2 * 0.3^(4 - 2)
= 6 * 0.7^2 * 0.3^2
= 0.1764
f. n = 3, x = 1, p = 0.9
p(x) = C(3, 1) * 0.9^1 * (1 - 0.9)^(3 - 1)
= 3 * 0.9 * 0.1^2
= 0.027
Learn more about binomial coefficients here:
brainly.com/question/29149191
#SPJ11
In a clinical test of the drug Viagra, it was found that 4% of those in a placebo group experienced headaches.
Among 8 randomly selected users of Viagra, what is the expected number and variance experiencing a headache?
The question asks for the expected number and variance of users experiencing headaches among a randomly selected group of 8 Viagra users. The information provided is that 4% of those in a placebo group experienced headaches.
To find the expected number and variance of users experiencing headaches among the randomly selected group of 8 Viagra users, we can use the concept of a binomial distribution. The probability of experiencing a headache is given as 4% or 0.04.
The expected number (mean) of users experiencing headaches can be calculated using the formula E(X) = n * p, where E(X) represents the expected value, n is the number of trials (8 users), and p is the probability of success (0.04). Therefore, the expected number of users experiencing headaches among the 8 randomly selected Viagra users is 8 * 0.04 = 0.32.
To calculate the variance, we can use the formula Var(X) = n * p * (1 - p), where Var(X) represents the variance. Plugging in the values, we get Var(X) = 8 * 0.04 * (1 - 0.04) = 0.2432.
In summary, the expected number of users experiencing headaches among the randomly selected group of 8 Viagra users is 0.32, and the variance is 0.2432.
Learn more about drug viagra:
https://brainly.com/question/4492069
#SPJ11
A car registration plate consists of 6 characters where each character may be any uppercase letter or digit. What is the probability of selecting a plate that contains no vowels? Round your answer to four decimal places.
The required probability of selecting a plate that contains no vowels is 0.0003.
The total number of ways in which a 6 character registration plate can be formed is [tex]$36^6$[/tex]since we have 26 letters (all uppercase) and 10 digits and can use any of these for each character.
For no vowel registration plates, we can only use the 20 consonants.
There are 20 choices for the first character, 20 choices for the second character and so on.
Therefore, the probability of selecting a plate that contains no vowels is:
[tex]\frac{20}{36}\times\frac{20}{36}\times\frac{20}{36}\times\frac{20}{36}\times\frac{20}{36}\times\frac{20}{36}[/tex]
Simplifying the above expression, we obtain:
[tex]\frac{20^6}{36^6} = \left(\frac{5}{9}\right)^6 \approx 0.00026[/tex]
Rounding this to four decimal places gives [tex]$0.0003$[/tex].
Therefore, the required probability of selecting a plate that contains no vowels is 0.0003.
For such more questions on probability
https://brainly.com/question/7965468
#SPJ8
Provide a basic experiment design for which you would use a
one-way ANOVA analysis.
What is being compared in a one-way ANOVA? What does a
significant ANOVA tell us about the data being analyzed?
A one-way ANOVA is typically used to assess whether or not three or more group means are equal. The null hypothesis is that all group means are equal, whereas the alternative hypothesis is that at least one group mean differs from the others.
To test the hypotheses, you'll need to conduct an F-test, which calculates the ratio of the variances of the group means to the variance of the residuals. If the null hypothesis is rejected, you can use post-hoc tests to find which group means differ significantly from the others.
For this experiment design, you would use a one-way ANOVA analysis.To compare the mean differences between the groups, one-way ANOVA is used. It is a parametric statistical method that is used to compare the means of two or more independent (unrelated) groups of data. It determines if there are any significant differences between the groups and is used to compare whether the means of three or more samples are similar or different.
The null hypothesis assumes that the population means are equal. A significant ANOVA informs us that there is enough evidence to reject the null hypothesis, implying that at least one population mean is significantly different from the others.
An ANOVA with three or more groups compares the variation in between groups to the variation within groups. The F-statistic is used to evaluate the differences in the variation. If the F-statistic is significant, it implies that the between-groups variation is significantly greater than the within-groups variation. The post-hoc analysis is done in this case. The post-hoc tests compare the different levels of the factor to one another to see if there are any significant differences between them.
To know more about variance :
brainly.com/question/14116780
#SPJ11
Determine the AER corresponding to the nominal rate of discount
d^(12) = 7% per annum.
please find AER.
The AER corresponding to the nominal rate of discount d^(12) = 7% per annum is 6.87%
In order to determine the AER corresponding to the nominal rate of discount d^(12) = 7% per annum, we can use the formula:
AER = (1 - d/12)^(12) - 1
Where AER stands for Annual Equivalent Rate and d is the nominal rate of discount.
Substituting the given values, we get:
AER = (1 - 0.07/12)^(12) - 1
AER = 0.0687 or approximately 6.87%
Therefore, the annual effective rate (AER) corresponding to the nominal rate of discount d(12) = 7% is 6.87%.
learn more about nominal rate from given link
https://brainly.com/question/30239259
#SPJ11
Calculate EAX∗24 using binary multiplication
EAX*24 = 1100000 in binary form.
The given expression is EAX*24. We need to calculate the value using binary multiplication. Here's how we can solve this problem using binary multiplication:Step 1: Convert 24 into binary form.24/2 = 12 → 0 (LSB)12/2 = 6 → 0 (next bit)6/2 = 3 → 0 (next bit)3/2 = 1 → 1 (next bit)1/2 = 0 → 1 (MSB)Therefore, 24 in binary form is 11000.Step 2: Multiply EAX with 24 (in binary form).EAX x 11000----------------------------------------EAX (multiplied by 0) (0) (0) (0) EAX (multiplied by 0) (0) (0) (0) EAX (multiplied by 1) (0) (0) (0) 0 0 0 0 (result)----------------------------------------Step 3: Multiply EAX by 1100 and shift the result by 2 bits to the left.EAX x 1100 (binary form)----------------------------------------EAX (multiplied by 0) (0) (0) (0) EAX (multiplied by 0) (0) (0) (0) EAX (multiplied by 1) (1) (1) (0) 0 0 0 0 (result)Shift left by 2 bits:1100000----------------------------------------Step 4: Add both results from Step 2 and Step 3.0000000 (from Step 2) + 1100000 (from Step 3)----------------------------------------1100000 (in binary form)Thus, EAX*24 = 1100000 in binary form.
Learn more about binary :
https://brainly.com/question/28391940
#SPJ11
