Answer:
AgNO3 + NaOH = AgOH + NaNO3.
Explanation:
Balancing Strategies: In this reaction, the products are initially NaNO3 + AgOH. However the AgOH would break down into Ag2O and H2O. This would give us NaNO3 + Ag2O + H2O as our products for the overall reaction.
Balancing Strategies: In this reaction, the products are initially NaNO3 + AgOH. However the AgOH would break down into Ag2O and H2O. This would give us NaNO3 + Ag2O + H2O as our products for the overall reaction.However, the equation balanced here is the initial reaction which produces AgOH and NaNO3.
A certain watch’s luminous glow is due to zinc sulfide paint that is energized by beta particles given off by tritium, the radioactive hydrogen isotope 3 H, which has a half-life of 12.3 years. This glow has about 1/10 of its initial brightness. How many years old is the watch? g
Answer:
The watch is 40.9 years old.
Explanation:
To know how many years old is the watch we need to use the following equation:
[tex] I_{(t)} = I_{0}e^{-\lambda t} [/tex] (1)
Where:
[tex]I_{(t)}[/tex]: is the brightness in a time t = (1/10)I₀
[tex]I_{0}[/tex]: is the initial brightness
λ: is the decay constant of tritium
The decay constant is given by:
[tex] \lambda = \frac{ln(2)}{t_{1/2}} [/tex] (2)
Where:
[tex]t_{1/2}[/tex]: is the half-life of tritium = 12.3 years
By entering equation (2) into (1) we have:
[tex] I_{(t)} = I_{0}e^{-\lambda t} = I_{0}e^{-\frac{ln(2)}{t_{1/2}}t} [/tex]
[tex] \frac{I_{(t)}}{I_{0}} = e^{-\frac{ln(2)}{t_{1/2}}t} [/tex]
By solving the above equation for "t" we have:
[tex] ln(\frac{I_{(t)}}{I_{0}}) = -\frac{ln(2)}{t_{1/2}}t [/tex]
[tex] t = -\frac{ln(\frac{I_{(t)}}{I_{0}})}{\frac{ln(2)}{t_{1/2}}} = -\frac{ln(\frac{1}{10})}{\frac{ln(2)}{12.3}} = 40.9 y [/tex]
Therefore, the watch is 40.9 years old.
I hope it helps you!
In order to complete the reaction of hexyl magnesium bromide with acetone, what next step needs to be done.
a. Fractional Distillation.
b. Vacuum filtration.
c. Aqueous workup.
d. Crystallization.
Answer:
Aqueous workup.
Explanation:
The reaction of hexyl magnesium bromide with acetone yields a tertiary alcohol. There is an organic phase and an aqueous phase.
Aqueous workup is the process of recovering the pure tertiary alcohol from the organic phase of the system.
Hence, in order to complete the reaction of hexyl magnesium bromide with acetone, aqueous workup is required.
The density of an aqueous solution containing 25.0 percent of ethanol (C2H5OH) by mass is 0.950 g/mL. (a) Calculate the molality of this solution. m (b) Calculate its molarity. M (c) What volume of the solution would contain 0.275 mole of ethanol
Answer:
a. 7.24m
b. 5.15M
c. 53.4mL of the solution would contain this amount of ethanol.
Explanation:
Molality, m, is defined as the moles of solute (ethanol, in this case) per kg of solvent.
Molarity, M, are the moles of solute per kg of solvent
To solve this question we need to find the moles of solute in 100g of solution and the volume using its density as follows:
a. Moles ethanol -Molar mass: 46.07g/mol-:
25g ethanol * (1mol/46.07g) = 0.54265 moles ethanol
kg solvent:
100g solution - 25g solute = 75g solvent * (1kg / 1000g) = 0.075kg
Molality:
0.54265 moles ethanol / 0.075kg = 7.24m
b. Liters solution:
100g solution * (1mL / 0.950g) = 105.3mL * (1L / 1000mL) = 0.1053L
Molarity:
0.54265 moles ethanol / 0.1053L = 5.15M
c. 0.275 moles ethanol * (1L / 5.15moles Ethanol) = 0.0534L =
53.4mL of the solution would contain this amount of ethanol
Answer EIGHT questions.
1(a) Whai do you mean by generation of computer? Describe brieíly
5
about third and fourth generations of computer.
B
moga dele
Answer:
Generation in computer terminology is a change in technology a computer is/was being used. Initially, the generation term was used to distinguish between varying hardware technologies. Nowadays, generation includes both hardware and software, which together make up an entire computer system.
5 generation of computer
Main electronic component: based on artificial intelligence, uses the Ultra Large-Scale Integration (ULSI) technology and parallel processing method.
ULSI – millions of transistors on a single microchip
Parallel processing method – use two or more microprocessors to run tasks simultaneously.
Language – understand natural language (human language).
Power – consume less power and generate less heat.
Speed – remarkable improvement of speed, accuracy and reliability (in comparison with the fourth generation computers).
Size – portable and small in size, and have a huge storage capacity.
Input / output device – keyboard, monitor, mouse, trackpad (or touchpad), touchscreen, pen, speech input (recognise voice / speech), light scanner, printer, etc.
Example – desktops, laptops, tablets, smartphones, etc.
3 generation of computer
Main electronic component – integrated circuits (ICs)
Memory – large magnetic core, magnetic tape / disk
Programming language – high level language (FORTRAN, BASIC, Pascal, COBOL, C, etc.)
Size – smaller, cheaper, and more efficient than second generation computers (they were called minicomputers).
Speed – improvement of speed and reliability (in comparison with the second generation computers).
Input / output devices – magnetic tape, keyboard, monitor, printer, etc.
Examples – IBM 360, IBM 370, PDP-11, UNIVAC 1108, etc.
4 generations of computer
Main electronic component – very large-scale integration (VLSI) and microprocessor.
VLSI– thousands of transistors on a single microchip.
Memory – semiconductor memory (such as RAM, ROM, etc.)
RAM (random-access memory) – a type of data storage (memory element) used in computers that temporary stores of programs and data (volatile: its contents are lost when the computer is turned off).
ROM (read-only memory) – a type of data storage used in computers that permanently stores data and programs (non-volatile: its contents are retained even when the computer is turned off).
Programming language – high level language (Python, C#, Java, JavaScript, Rust, Kotlin, etc.).
plzzz guys help it urgent
Answer:
requiring immediate action or attention.
word similar to urgent: Acute
Help me with these please
Answer:
Help you with what hmm I do not know what you are talking about
The standard free energy that is required for the sodium-potassium ATPase to pump two K ions into the cell and three Na ions is 43.8 kJ/mol but the standard free energy change of hydrolysis of ATP is only -32 kJ/mol. This apparent imbalance of free energy can be accounted for because ________.
Answer:
Explanation:
This apparent disparity of the free energy can be taken into account because:
the free energy produced by the hydrolysis of one ATP is adequate enough under psychological circumstances.
The Na-K ATPase aids the pumping of Na+ ions out of the cell and K+ ions into the cell. These actions occurring against their potential(concentration) gradients, which may be produced by hydrolyzing one ATP molecule.
Problem 7 (Diffusion due to viscosity) If the viscosity of a solution is quadrupled, the rms-average distance of a collection of diffusing molecules from their starting point would be _________ over the same amount of time.
Answer:
1/2 the distance
Explanation:
If the viscosity of a solution is quadrupled then the distance of collection of diffusing molecules would be half over the same amount of time. The viscosity of the molecules is dependent on density of the liquid. It is independent to the volume of the liquid.
A wavelength of 489.2 nm is observed in a hydrogen spectrum for a transition that ends in the nf level of the Balmer series. What was ni for the initial level of the electron
Answer:
[tex]n_1=4[/tex]
Explanation:
From the question we are told that:
Wavelength [tex]\lambda=489.2 nm =>4.86*10^{-7}[/tex]
nf level= Balmer series
nf level= 2
Generally the equation for Wavelength is mathematically given by
[tex]\frac{1}{\lambda}=R[\frac{1}{nf^2}-\frac{1}{n_1^2}][/tex]
Where
[tex]R=Rydberg Constant[/tex]
[tex]R=1.097*10^7[/tex]
Therefore
[tex]\frac{1}{4.86*10^{-7}}=1.097*10^7[\frac{1}{2^2}-\frac{1}{n_1^2}][/tex]
[tex]n_1=4.0021[/tex]
[tex]n_1=4[/tex]
What information does the first quantum number of an electron give?
A. The sublevel that the electron is in
B. The specific orbital the electron is in
C. The energy level the electron is in
D. The spin that the specific electron has
Answer:
с
Explanation:
the first quantum number of an electron gives the information about the energy level the electron is in
The information first quantum number of an electron give is the energy level the electron is in.
What are quantum numbers?Quantum numbers is a set of symbols which gives idea about the position of electron present inside an atom.
First quantum number is denoted by symbol 'n' which gives idea about the number of shell or energy level in which electron is present.The sublevel that the electron is in is the second quantum number denoted by symbol 'l'.The specific orbital in which electron is present is denoted by symbol 'm' and it is the third quantum number.The spin that the specific electron has is the forth quantum number and denoted by symbol 's'.Hence first quantum number of electron gives ideal about the energy level.
To know more about quantum numbers, visit the below link:
https://brainly.com/question/11575590
3 why does soldium produce blue colour when dissolve in ammonia?
Answer:
Because it is dissolving and has pigment.
Explanation:
Answer:
The solvated electron is responsible for a great deal of radiation chemistry. Alkali metals dissolve in liquid ammonia giving deep blue solutions which conduct electricity . The blue colour of the solution is due to ammoniated electrons which absorb energy in the visible region of light.
The rate constant of an SN1 reaction depends on the nucleophile b. The rate constant of an SN2 reaction does not depend on the nucleophile c. SN1 reactions proceed via carbocation intermediates d. The SN2 mechanism does not involve an intermediate
Answer:
The rate constant of an SN1 reaction depends on the nucleophile
The rate constant of an SN2 reaction does not depend on the nucleophile
Explanation:
Let us recall that in an SN1 reaction, the rate determining step involves only the alkyl halide substrate and not the nucleophile. Hence;
Rate = k[RX]
Therefore;
k= Rate/[RX]
For an SN2 reaction, the rate determining step involves both the nucleophile and the alkyl halide substrate.
Hence;
Rate = k[Nu-] [RX]
k= Rate/[Nu-] [RX]
Note that;
[Nu-] = concentration of the nucleophile
[RX] =concentration of alkyl halide substrate
k= rate constant
We can see from the above derivations that;
1) The rate constant of an SN1 reaction does not depend on the nucleophile
2) The rate constant of an SN2 reaction depends on the nucleophile
Hypercalcemia sign and symptoms severe symptoms
Answer:
Hypercalcemia can cause stomach upset, nausea, vomiting and constipation. Bones and muscles. In most cases, the excess calcium in your blood was leached from your bones, which weakens them. This can cause bone pain and muscle weakness.
Some symptoms are:
Fatigue, bone pain, headaches.
Nausea, vomiting, constipation, decrease in appetite.
Forgetfulness.
Lethargy, depression, memory loss or irritability.
Muscle aches, weakness, cramping and/or twitches.
A alkaloid compound contains 74.02% C, 8.710% H and 17.27% N. The empirical formula of the compound is___.
If 40.57 grams of it contains 0.2500 moles, then it's molecular formula will be:______.
C₁₀H₁₄N₂ is the empirical formula of the compound whose mass is 40.57 present in 0.2500 moles.
What are alkaloid compounds?Alkaloid compounds are those naturally present organic compounds in which nitrogen is present.
First we calculate the molecular mass of wanted compound by using the below formula:
n = W/M, where
n = no. of moles = 0.2500 moles (given)
W = given mass = 40.57 grams (given)
M = molar mass = 40.57 grams/= 0.2500 moles = 162.28 g/mole
In the question, given that:
% composition of carbon = 74.02%
% composition of hydrogen = 8.710%
% composition of nitrogen = 17.27%
Now we calculate the mass of these composition by using the below formula:
Composition mass = compound mass * % composition / 100
Mass of carbon = 162.28 * 74.02 / 100 = 120.11g
Mass of hydrogen = 162.28 * 8.710 / 100 = 14.13g
Mass of nitrogen = 162.28 * 17.27 / 100 = 28.02g
Now we calculate the moles of these composition to made empirical formula as:
Moles of carbon = 120.11 / 12 = 10
Moles of hydrogen = 14.13 / 1 = 14
Moles of nitrogen = 28.02 / 14 = 2
Thus, the empirical formula of the compound is C₁₀H₁₄N₂.
To know more about empirical formula, visit the below link:
https://brainly.com/question/1603500
What is the trend in electropositivity in group 1 elements?
Answer:
Electro positivity increases down the group
7.7 cm
9.8 cm
0.00
0.162 m
Answer:
Volume = 1222.5cm³
Explanation:
If the question is about the volume of the rectangle:
The volume of a rectangle is obtained by the multiplication of its 3 dimensions: Length, width, height.
In the problem, the length of the rectangle is 0.162m = 16.2cm
The width is 7.7cm
And the height is 9.8cm
The volume is:
Volume = 16.2cm*7.7cm*9.8cm
Volume = 1222.5cm³If 50.0 g of sulfuric acid and 40.0 grams of barium chloride are mixed, how many grams of sulfuric acid and how many grams of barium chloride remain after the double replacement reaction is complete?
After the double replacement reaction is complete 0 grams of BaCl₂ and 31.16 grams of H₂SO₄ will remain.
First, we will write the balanced equation for the reaction
H₂SO₄ + BaCl₂ → BaSO₄ + 2HCl
This means 1 mole of BaCl₂ is needed to react completely with 1 mole of H₂SO₄ to give 1 mole of BaSO₄ and 2 moles of HCl
From the question, 50.0g of sulfuric acid is mixed with 40.0 grams of barium chloride. To determine the quantity of each substance remaining after the complete reaction, we will first determine the number of moles present in each of the reactant.
For H₂SO₄
mass = 50.0g
Molar mass = 98.079 g/mol
From the formula
Number of moles = Mass / Molar mass
∴ Number of moles of H₂SO₄ = 50.0g / 98.079 g/mol
Number of moles of H₂SO₄ = 0.5098 mol
For BaCl₂
mass = 40.0 g
Molar mass = 208.23 g/mol
∴ Number of moles of BaCl₂ = 40.0g / 208.23 g/mol
Number of moles of BaCl₂ = 0.1921 mol
Since the number of moles of H₂SO₄ is more than that of BaCl₂, then H₂SO₄ is the excess reagent and BaCl₂ is the limiting reagent (that is, it will be used up completely during the reaction)
From the equation, 1 mole of H₂SO₄ is needed to completely react with 1 mole of BaCl₂
∴ 0.1921 mol of H₂SO₄ will be needed to completely react with 0.1921 mol of BaCl₂.
Therefore, after the reaction is complete, 0 mole (i.e 0 grams) of BaCl₂ will remain and (0.5098 mole - 0.1921 mole) of H₂SO₄ will remain.
Number of moles H₂SO₄ that will remain = 0.5098 mole - 0.1921 mole = 0.3177 moles
Now, we will convert this to grams
From the formula
Mass = Number of moles × Molar mass
Mass of H₂SO₄ that will remain = 0.3177 moles × 98.079 g/mol
Mass of H₂SO₄ that will remain = 31.1597 g
Mass of H₂SO₄ that will remain ≅ 31.16 g
Hence, after the double replacement reaction is complete 0 grams of BaCl₂ and 31.16 grams of H₂SO₄ will remain.
Learn more here: https://brainly.com/question/6857557
Part A
When the following liquids are poured into the same container, they separate as shown in the image. Based on the data
in the table below, what caused the order of the layers?
rubbing alcohol
vegetable oil
water
corn syrup
Mass
Liquid
corn syrup
water
Volume Used
95 cm
90 cm
85 cm
105 cm?
130.158
90.00 8
77.358
81.908
Density
1.37 g/cm
1 g/cm
0.91 g/cm
0.78 g/cm
vegetable oil
rubbing alcohol
I
B
X
Font Sizes
A- A -
E 3
Answer: The layers are ordered by density, with the least dense layer on top, and the densest layer on the bottom.
Explanation:
Plato
When would exposure to a potentially harmful substance most likely to damage many organs in a developing embryo?
Could someone please help me out???
Answer:
Time is 2.2 seconds.
Explanation:
Time:
[tex]{ \boxed{ \bf{time = \frac{distance}{speed} }}}[/tex]
Substitute into the formula:
speed = 715 km/h = 198.61 m/s
[tex]{ \tt{time = \frac{435}{198.61} }} \\ { \tt{time = 2.2 \: seconds}}[/tex]
A chemical reaction takes place inside a flask submerged in a water bath. The water bath contains 6.90kg of water at 34.7 degrees C . During the reaction 57.1kJ of heat flows out of the bath and into the flask.
Calculate the new temperature of the water bath. You can assume the specific heat capacity of water under these conditions is 4.18J.g^(-1).K^(-1) . Round your answer to significant digits.
Answer:
[tex]T_2= 36.7 \textdegree C[/tex]
Explanation:
Mass of Water [tex]m_w=6.90kg[/tex]
Temperature [tex]T=34.7 degrees[/tex]
Heat Flow [tex]H=57.1kJ[/tex]
Specific heat capacity of water [tex]\mu= 4.18J.g^(-1).K^(-1)[/tex]
Generally the equation for Final Temperature is mathematically given by
[tex]M*\mu *T_1 + Q = M*\mu *T_2[/tex]
[tex]T_2=\frac{M*\mu *T_1 + Q }{M*\mu}[/tex]
Therefore
[tex]T_2=\frac{6.90*4.18*34.7 + 57.1}{6.90*4.18}[/tex]
[tex]T_2= 36.7 \textdegree C[/tex]
Critique this statement: Promotion of electrons is accompanied by a release of energy
Answer: Promotion of electrons is accompanied by a release of energy because of absorption of photon.
Explanation:
Promotion of electrons occurs when an electron accepts or absorbs a photon which leads to it's movement from a lower energy level orbital to a higher energy orbital.
According to Bohr, the electrons was restricted to certain energy levels and was thought to move along certain circular orbits around the nucleus. These energy levels were identified by means of principal quantum number, n. The wave mechanics model of atom does not restrict the electrons to a certain energy levels only. Instead it describes a region around the Nucleus called orbitals where there is a possibility of finding an electron with a certain amount of ENERGY.
The energy levels are composed of one or more orbitals and the distribution of electrons around the nucleus is determined by the number and kind of energy levels that are occupied.
Bohr made an assumption that an electron emits energy in the form of radiation when it moves from a higher to a lower permitted orbit, this produces a line in the atomic emission spectrum. Since the energies of the higher and lower orbits are fixed, the line will be of a particular energy and frequency.
why is it difficult to undergo nucleophilic substitution in haloarene?
Answer:
In Haloarenes the C atom to which the X group is attached is SP2 hybridized thus it is become difficult to replace it by the Nucleophile. Since arenes and Vinyl halides are electron rich molecules due to presenceof n bonds, they repel Nucleophile attacking them.
Question:-
Why it is difficult for haloarenes to undergo nucleoplhilic subsituⁿ reaction?
Answer:-
Haloarenes are less reactive towards the nucleoplhilic substitution rxⁿ . This is due to following reasons :-
[tex]\red{\bigstar}\underline{\textsf{ Reason 1 :- Partial double bond character .}}[/tex]
Halogen atom has one lone pair, and due to presence of π - σ - lp , resonance is established in the compound ( see attachment) . Due to resonance there is a partial double bond character in the carbon halogen bond , so it is difficult to break a double bond than a single bond.
[tex]\rule{200}2[/tex]
[tex]\red{\bigstar}\underline{\textsf{ Reason 2 :- $\pi$ cloud .}}[/tex]
When a nucleoplhile comes to attack , it is repelled by the π-cloud of the benzene ring.
[tex]\rule{200}2[/tex]
[tex]\red{\bigstar}\underline{\textsf{ Reason 3 :- Phenyl cation .}}[/tex]
If somehow the halogen atoms leaves the benzene ring ,being more electronegative than carbon , it takes away the electron , thus a positive charge is left on benzene ring and the phenyl cation so formed is very unstable .
[tex]\rule{200}2[/tex]
Congratulations! You are now the head biologist at the local "Cells and Bells" research lab! It has come to other cell biologists' attention recently that some cells are too small to contain all of the organelles inside of them. They decide that it's best to get rid of an organelle, but they're not sure which one. In the first process of this decision, they need to know "which organelle is the most important?"
Your job, as the head cell biologist, is to decide which organelle the cell cannot live without.
Write a research paper (intro, body, and conclusion) on which organelle is the most important and why.
What volume of 1.50 mol/L stock solution is needed to make 125 mL of 0.60 mol/L solution?
Chemistry 11 Solutions
978Ͳ0Ͳ07Ͳ105107Ͳ1Chapter 8 Solutions and Their Properties • MHR | 85
Amount in moles, n, of the NaCl(s):
NaCl
2.5 g
m
n
M
58.44 g
2
4.2778 10 m l
ol
o
/m
u
Molar concentration, c, of the NaCl(aq):
–2 4.2778 × 10 mol
0.100
0.42778 mol/L
0.43 mol
L
/L
n
c
V
The molar concentration of the saline solution is 0.43 mol/L.
Check Your Solution
The units are correct and the answer correctly shows two significant digits. The
dilution of the original concentrated solution is correct and the change to mol/L
seems reasonable.
Section 8.4 Preparing Solutions in the Laboratory
Solutions for Practice Problems
Student Edition page 386
51. Practice Problem (page 386)
Suppose that you are given a stock solution of 1.50 mol/L ammonium sulfate,
(NH4)2SO4(aq).
What volume of the stock solution do you need to use to prepare each of the
following solutions?
a. 50.0 mL of 1.00 mol/L (NH4)2SO4(aq)
b. 2 × 102 mL of 0.800 mol/L (NH4)2SO4(aq)
c. 250 mL of 0.300 mol/L NH4
+
(aq)
What Is Required?
You need to calculate the initial volume, V1, of (NH4)2SO4(aq) stock solution
needed to prepare each given dilute solution.
The dilution gives the relationship between the molarity and the volume of the solution. The volume of stock solution with a molarity of 1.50 mol/L is 50 mL.
What is dilution?Dilution is said to be the addition of more volume to the concentrated solution to make it less in molar concentration. This tells about the inverse and indirect relationship between the volume and the molar concentration of the solution.
Given,
Initial volume = V₁
Initial molar concentration (M₁) = 1.50 mol/L
Final volume (V₂) = 125 mL = 0.125 L
Final molar concentration (M₂)= 0.60 mol/L
The dilution is calculated as:
M₁V₁ = M₂V₂
V₁ = M₂V₂ ÷ M₁
Substituting the values in the above formula as
V₁ = M₂V₂ ÷ M₁
V₁ = (0.60 mol/L × 0.125 L) ÷ 1.50 mol/ L
V₁ = 0.05 L
= 50 mL
Therefore, 50 mL of stock solution is needed to make a 0.60 mol/L solution.
Learn more about dilution, here:
https://brainly.com/question/15718488
#SPJ2
Complete and balance the nuclear equations for the following fission reactions.
a. 23592U+10n→16062Sm+7230Zn+?10n. Express your answer as a nuclear equation.
b. 23994Pu+10n→14458Ce+?+210n
Answer:
23592U+10n→14454Xe+9038Sr+210n
Explanation:
a nuclear reaction for the neutron-induced fission of U−235 to form Xe−144 and Sr−90.
An analytical chemist is titrating of a solution of hydrazoic acid with a solution of . The of hydrazoic acid is . Calculate the pH of the acid solution after the chemist has added of the solution to it.
Answer:
pH = 12.43
Explanation:
...is titrating 212.7 mL of a 0.6800 M solution of hydrazoic acid (HN3) with a 0.2900 M solution of KOH. The p Ka of hydrazoic acid is 4.72. Calculate the pH of the acid solution after the chemist has added 571.6 mL of the KOH solution to it.
To solve this question we need to know that hidrazoic acid reacts with KOH as follows:
HN3 + KOH → KN3 + H2O
Moles KOH:
0.5716L * (0.2900mol /L) =0.1658 moles of KOH
Moles HN3:
0.2127L * (0.6800mol/L) = 0.1446 moles HN3
As the reaction is 1:1, the KOH is in excess. The moles in excess of KOH are:
0.1658 moles - 0.1446 moles =
0.0212 mol KOH
In 212.7mL + 571.6mL = 784.3mL = 0.7843L
The molarity of KOH = [OH-] is:
0.0212 mol KOH / 0.7843L = 0.027M = [OH-]
The pOH is defined as -log [OH-]
pOH = -log 0.027M
pOH = 1.57
pH = 14 - pOH
pH = 12.43
The reversible reaction 2H2 CO <------> CH3OH heat is carried out by mixing carbon monoxide and hydrogen gases is a closed vessel under high pressure with a suitable catalyst . After equilibrium is established at high temperature and pressure, all three substances are present. If the pressure on the system is lower, with the temperature kept constant, what will be the result
Answer:
The amount of CH3OH present in the mixture would decrease
Explanation:
According to Le Cha-telier's principle, when a reaction is in equilibrium and one of the constraints that influence the rate of reactions is applied, the equilibrium would shift so as to neutralize the effects of the constraint.
In this case, looking at the equation of the reaction:
2H2 + CO <------> CH3OH + heat
the total number of moles on the reactant's (left hand) side is 3 (2+1) while on the product's (right hand) side, it is 1. If the pressure on the system is increased, more CH3OH (and less of H2 and CO) will be produced because its side has the lower number of moles out of the two sides.
If the pressure on the system is otherwise lowered, more of H2 and CO would be produced while the amount of CH3OH present would gradually decrease.
what is the functions of sodium chloride oxalate in blood sample container
Answer:
To prevent the coagulation of blood
Explanation:
Sodium chloride oxalate in blood sample containers exists to prevent the coagulation of blood samples being collected (for analytical purposes).
The compound works by chelating or combining with blood's calcium which is necessary for blood to coagulate (change from flowing liquid to gel-like substance).
Calcium ions are known to be responsible for the activation of certain coagulation factors such as FXIII and therefore, play important roles in homeostasis during blood clotting. Hence, the removal of the calcium in blood disrupts the homeostatic process of clotting formation and results in the blood not being able to coagulate.
Is Water and kerosine a mixture
Answer:
No.Kerosene oil and water do not mix with each other and form two separate layers.
Answer:
No
Explanation:
They cannot be mixed together they will form upper and lower layer
