Answer:
D
Explanation:
Desalination
Removing salt from sea water is known as desalination
9. In order to determine the melting point of tetradecanol, it was important that _____. the thermometer was attached to the capillary tube the water was frozen the capillary tube was immersed in the water without the thermometer
To record the melting point of tetradecanol, it is important the temperature is increase by little degrees after each trial.
The thermometer attached to the capillary tube was immersed in water without thermometer.
Usually heating curve describes the temperature change for a sample which passes through different states of matter.
The temperature than decreases and the solution in beaker cools down. To determine the melting point, it is important to keep the temperature consistent.
Learn more at https://brainly.com/question/24335381
The Halogen Group is also known as the?
salt formers
acid makers
Answer:
I think b acid makers
Explanation:
hope it will help you
Over a long period of time the process of deposition causes the formation of
O
A. acid rain
OB. glaciers
OC. sedimentary rock
OD. Karst topography
Answer:
C. sedimentary rock
Explanation:
Deposition is basically a process in which sediments are added to land.
What is photosynthesis??...
the process plants use sunlight to synthesize food
Answer:
It is when green plants and other organisms transform light energy into chemical energy.
Please help me fast! Pleaseee
I think 2 answer is write
Choose the most correct answer: The endothermic (∆H > 0) reaction:
a) Cannot occur at all temperature.
b) Can occur with the positive ∆S at high temperature.
c) Can occur with the negative ∆S at low temperature.
d) Cannot occur with the positive ∆S at high temperature.
Answer:
B
Explanation:
In order to create spontaneity, an endothermic process has to occur along with positive entropy and high temperature
Determine if each compound is an alkane, alkene, alkyne, or aromatic compound. This compound has the formula C H 3 C H C (C H 3) C H 2 C H 2 C H 2 C H 3. There is a double bond between carbons two and three. aromatic alkyne alkene alkane This compound consists of a six membered carbon ring with alternating double and single bonds. There is a C H 2 C H 3 group attached to one of the carbon atoms in the ring. alkyne aromatic alkane alkene CH3CH2COCH3 alkyne aromatic alkene alkane CH3(CH2)2CH3 alkane aromatic alkene alkyne
Answer:
C H 3 C H C (C H 3) C H 2 C H 2 C H 2 C H 3
Explanation:
Read the given equation:
Ca(OH)2 + 2HCl → CaCl2 + 2H2O
Which of the following is true about the equation?
Ca(OH)2 is the base and CaCl2 is the salt.
Ca(OH)2 is the acid and CaCl2 is the salt.
HCl is the acid and Ca(OH)2 is the salt.
HCl is the base and Ca(OH)2 is the salt.
Answer:
Ca(OH)2 is the base and CaCl2 is the salt
Explanation:
i think this is the answer because calcium hydroxide has hydroxide ions as the only positively charged ion and calcium chloride is a salt.
I hope this helps
The chemical equation for the formation of calcium chloride has Ca(OH)₂ as the base and CaCl₂ as the salt. Hence, option A is correct.
What is salt?Salt is given as the neutral compound with the presence of the acidic and the basic constituents. The salt can be formed as a result of the neutralization reaction of acid and base.
The acids are comprised of the presence of the hydrogen ion, and the base comprises the presence of the hydroxide ions. Thus, in the given reaction, Ca(OH)₂ is the base and CaCl₂ is the salt. Hence, option A is correct.
Learn more about salt, here:
https://brainly.com/question/10208023
#SPJ2
Which of the following is classified as paramagnetic?
1.NO(+)
2.Be2
3.B2(+)
4.+N2(+)
Please help me! I am a bit stuck on this.
How much heat does a 100. g sample of copper absorb when its temperature increases by 30.0°C? The specific heat of copper is 0.39 J/g °C.
a) 2340 J
b) 1170 J
c) 2.34 J
d) 1.17 J
Answer:
[tex]\boxed {\boxed {\sf B. \ 1170 \ Joules }}[/tex]
Explanation:
We are asked to find how much heat a sample of copper absorbs when the temperature is increased.
Since we know the mass, temperature increase, and specific heat capacity, we can use the following formula to calculate heat.
[tex]q= mc \Delta T[/tex]
The mass of the copper sample is 100 grams, the temperature is changed or increased by 30.0 degrees Celsius, and the specific heat of copper is 0.39 Joules per gram degrees Celsius.
m= 100 g c= 0.39 J/g °C ΔT= 30.0 °CSubstitute the values into the formula.
[tex]q= (100 \ g )(0.39 \ J/g \textdegree C ) (30.0 \textdegree C )[/tex]
Multiply the first two values. Note that the units of grams cancel.
[tex]q= 39 \ J/ \textdegree C (30.0 \textdegree C )[/tex]
Multiply again, this time the units of degrees Celsius cancel.
[tex]q= 1170 \ J[/tex]
The copper sample absorbs 1170 Joules of heat and Choice B is correct.
2. An ion is a charged particle that is formed when
a. An atom gains electrons
b. An atom loses electrons
c. Both A and B
d. None of the above
The correct answer is option c. Both A and B: An ion is a charged particle that is formed when an atom gains electrons or an atom loses electrons.
First you need to know the definition of ion. An ion is a molecule or atom that has a positive or negative electrical charge.
That is, an ion is an atom whose electric charge is not neutral. This charged particle can be positive or negative.
Ionization is the chemical or physical process by which ions are produced. In this process, negatively charged ions are produced by gaining electrons and are known as anions.
The positively charged are produced by the loss of electrons and are known as cations.
In summary, an ion is a charged particle that is formed when an atom gains electrons or an atom loses electrons, and they are known as cations and anions respectively.
The correct answer is both A and B.
Learn more about ions:
https://brainly.com/question/13692734?referrer=searchResults
Please comment the chart!!!!!
thanks!!
Answer:
Exothermihic chart
Explanation:
Which one of the following compounds
contains ionic bonds?
a) NI3
B) HF
c) SiO2
d) CaO
Your answer is CaO.I hope that my answer helped you..
molecular weight of K2SO3
Explanation:
the molecular weight of K2SO3 is 158. 2598 m/s.
The mass of a container is determined to be 1.2 g. A sample of a compound is transferred to this container, and the mass of the compound plus the container is determined to be 3.06 g. The mass of the compound should be reported as:__.
Answer:
Sorry I don't know what you
According to law of conservation of mass as mass is neither created nor destroyed mass of compound should be reported as 1.86 g that is by subtracting mass of compound from mass of compound and container.
What is law of conservation of mass?According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .
Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.
Law needs to be modified in accordance with laws of quantum mechanics under the principle of mass and energy equivalence.This law was proposed by Antoine Lavoisier in the year 1789.
Learn more about law of conservation of mass,here:
https://brainly.com/question/13383562
#SPJ2
Leo carefully pipets 50.0 mL of 0.500 M NaOH into a test tube. She places the test tube
into a small beaker to keep it from spilling and then pipets 75.0 mL of 0.250 M HCl into
another test tube. When Leo reaches to put this test tube of acid into the beaker along
with test tube of base she accidentally knocks the test tubes together hard enough to
break them and their respective contents combine in the bottom of the beaker. Is the
solution formed from the contents of the two test tubes acidic or basic? What is the pH of
the resulting solution?
Please answer below questions one by one to assist you receive full credits
(Alternatively, you can discard my hints below, solve the problem using your own way
and send me the picture/copy of your complete work through email)
The mole of NaOH before mixing is
mol (save 3 significant figures)
The mole of HCl before mixing is
mol (save 4 significant figures)
After mixing, the solution is
(choose from acidic or basic)
The total volume of mixture is
L (save 3 significant figures)
The concentration of [OH-] is
M (save 3 significant figures)
The concentration of [H'l is
M (save 3 significant figures)
Let's consider the neutralization reaction between HCl and NaOH.
NaOH + HCl ⇒ NaCl + H₂O
To determine the pH of the resulting mixture, we need to determine the reactant in excess. First, we will calculate the reacting moles of each reactant.
NaOH: 0.0500 L × 0.500 mol/L = 0.0200 mol
HCl: 0.0750 L × 0.250 mol/L = 0.0188 mol
Now, let's determine the reactant in excess and the remaining moles of that reactant.
NaOH + HCl ⇒ NaCl + H₂O
Initial 0.0200 0.0188
Reaction -0.0188 -0.0188
Final 1.20 × 10⁻³ 0
The volume of the mixture is 50.0 mL + 75.0 mL = 125.0 mL. Then, 1.20 × 10⁻³ moles of NaOH are in 125.0 mL of solution. The concentration of NaOH is:
[NaOH] = 1.20 × 10⁻³ mol/0.1250 L = 9.60 × 10⁻³ M
NaOH is a strong base according to the following equation.
NaOH ⇒ Na⁺ + OH⁻
The concentration of OH⁻ is 1/1 × 9.60 × 10⁻³ M = 9.60 × 10⁻³ M.
The pOH is:
pOH = -log [OH⁻] = -log 9.60 × 10⁻³ = 2.02
We will calculate the pH using the following expression.
pH = 14.00 - pOH = 14.00 - 2.02 = 11.98
The pH is 11.98. Since pH > 7, the solution is basic.
You can learn more about neutralization here: https://brainly.com/question/16255996
What happens to the electropositive character of elements on moving from left to right along a period in a periodic table?
Answer:
On moving from left to right in a period the electropositive character decreases as the tendency to lose electrons decreases.
Explanation:
What is the H+ ion concentration of a solution with a pH of 7?
answer=H+]=10-7
explain=the same way, a solution with a pH of 5 contains 10-5mol/l of hydrogen ions, a solution with a pH of 6 contains 10-6mol/l of hydrogen ions, while the solution with a pH of 7 contains 10-7mol/l of hydrogen ions
tom pays 5 cents per minute to use his cell phone. Write an expression for the cost in cents of using his cell phone for minutes.
Answer:5m
Explanation:Because in the question it say per minute so it would be 5 times m
Dung dịch nào sau đây chỉ chứa các ion (bỏ qua sự điện li của nước, các chất điện li mạnh phân li hoàn toàn)?
A. HBr, Na2S, Mg(OH)2, Na2CO3.
B. H2SO4, NaOH, NaCl, HF.
C. HNO3, H2SO4, KOH, K2SiO3.
D. Ca(OH)2, KOH, CH3COOH, NaCl.
Answer:
Dung dịch nào sau đây chỉ chứa các ion (bỏ qua sự điện li của nước, các chất điện li mạnh phân li hoàn toàn)?
A. HBr, Na2S, Mg(OH)2, Na2CO3.
B. H2SO4, NaOH, NaCl, HF.
C. HNO3, H2SO4, KOH, K2SiO3.
D. Ca(OH)2, KOH, CH3COOH, NaCl.
calculate the total consumer surplus in the amusement park market if they a 12
Answer:
The total consumer surplus is 240.
Explanation:
If p=12 then q=20
0.5×(36−12)×20=240
here's the graph to help you see the change.
How many neutrons does Carbon- 14 and Carbon -15 have? *
Answer: 8 for both
Explanation:
Please help fast
All four referenced Greek thinkers: Democritus, Aristotle, Archimedes, and Anaxagoras, observed Nature and argued for his theory of
the composition of matter and natural laws. Only one of them tested his hypothesis and proposed a natural laws based on reproducible
observations, controlled experiments, and mathematical reasoning. All others used logic and thought experiments, as philosophers do,
to support their theories. Who is the experimental scientist in this group?
O Democritus
O Aristotle
O Archimedes
O Anaxagoras
Answer:
Anaxagoras was perhaps the first literate person to attempt to explain physical phenomena rationally, basing his ideas upon careful observations and simple experiments. This is fundamental to modern science and is the sine qua non of environmental study.
.) At 500 oC, cyclopropane, C3H6, rearranges to form propene. The reaction is first order with a rate constant of 6.7 x 10-4 s-1. If the initial concentration of C3H6 is 0.0500 M, (a) what is the molarity of C3H6 after 30 min
Answer:
0.015 M
Explanation:
For a first order reaction;
ln[A] =ln[A]o - kt
[A] = final concentration
[A]o =initial concentration
k= rate constant
t= time taken
ln[A] =ln[A]o - kt
ln[A] = ln(0.0500) - 6.7 x 10-4 (30 × 60)
ln[A] = -2.9957 - 1.206
ln[A] = -4.202
e^ln[A] = e^(-4.202)
A= 0.015 M
An alkane can show structural isomerism if it has at least ______ carbon atom
1)1
2)2
3)3
4)4
Spam = report and kick u
Answer:
2) 3 carbons
Explanation:
The alkane with one carbon is methane but it has no isomer.
The alkanes starting with propane only have isomers
Explanation:
An alkane can show structural isomerism if it has at least __4__ carbon atom
What is the percent composition of chlorine in the compound Ba(ClO3)2?
You're going to divide the mass of chlorine within the compound by the mass of the compound, and then multiply the result by 100 to get the answer
9. Light is used in photosystem II and photosystem I to
O A. power the Calvin cycle.
B. fix carbon dioxide.
C. make carbon dioxide.
D. excite an electron.
Answer:
A. power the Calvin cycle.
Explanation:
because it helps to run theblife of plants with easily
HELP!!!!! Substance A and substance B are mixed together. To separate the mixture, water is added, and substance A is filtered out. Then, the remaining liquid is heated to remove the water, leaving a residue of substance B. Which statement about substance A and substance B could be correct?
A. Substance A is rice, and substance B is sugar.
B. Substance A is alcohol, and substance B is salt.
C. Substance A is sand, and substance B is alcohol.
D. Substance A is sugar, and substance B is instant coffee.
The statement that "substance A is rice, and substance B is sugar" is correct.
WHAT IS A MIXTURE?
A mixture in chemistry is a substance that contains two or more different substances. One notable characteristics of a mixture is that it can easily be separated using physical means.According to this question, a mixture contains two substances A and B. Water is added to this mixture for easy separation.
Substance A is filtered out. This means that substance A is a solid that is insoluble in water. This substance is RICE. The remaining liquid is heated to remove the water content leaving a residue of substance B. This shows that substance B is also a solid but soluble in water. SUGAR best fits this description.Therefore, in the mixture of two substances A and B, substance A is rice, and substance B is sugar.
Learn more at: https://brainly.com/question/6594631
What is the main reason for using a data table to collect data?
A. To interpret the possible meaning of the data
B. To find the possible errors that were made in recording the data
C. To organize the information so that it is easier to understand
O
D. To make an experimental journal more attractive
Answer:
c
Explanation:
table of data help us to understand and present our work better
I did it and got it right, it's c
